diff options
139 files changed, 13359 insertions, 8309 deletions
@@ -105,11 +105,11 @@ The stm32h7 directory contains code from: version v1.9.0 (ccb11556044540590ca6e45056e6b65cdca2deb2). Contents taken from the Drivers/CMSIS/Device/ST/STM32H7xx/ directory. -The rp2040 directory contains code from the pico sdk: +The pico-sdk directory contains code from the pico sdk: https://github.com/raspberrypi/pico-sdk.git -version 1.2.0 (bfcbefafc5d2a210551a4d9d80b4303d4ae0adf7). It has been +version 2.0.0 (efe2103f9b28458a1615ff096054479743ade236). It has been modified so that it can build outside of the pico sdk. See -rp2040.patch for the modifications. +pico-sdk.patch for the modifications. The elf2uf2 directory contains code from the pico sdk: https://github.com/raspberrypi/pico-sdk.git diff --git a/lib/rp2040/boot/picoboot.h b/lib/pico-sdk/boot/picoboot.h index ddfa0aaa..8645d52d 100644 --- a/lib/rp2040/boot/picoboot.h +++ b/lib/pico-sdk/boot/picoboot.h @@ -16,18 +16,20 @@ #endif /** \file picoboot.h -* \defgroup boot_picoboot boot_picoboot +* \defgroup boot_picoboot_headers boot_picoboot_headers * -* Header file for the PICOBOOT USB interface exposed by an RP2040 in BOOTSEL mode. +* \brief Header file for the PICOBOOT USB interface exposed by an RP2xxx chip in BOOTSEL mode */ +#include "picoboot_constants.h" + #define PICOBOOT_MAGIC 0x431fd10bu // -------------------------------------------- // CONTROL REQUESTS FOR THE PICOBOOT INTERFACE // -------------------------------------------- -// size 0 OUT - unstall EPs and reset +// size 0 OUT - un-stall EPs and reset #define PICOBOOT_IF_RESET 0x41 // size 16 IN - return the status of the last command @@ -47,11 +49,17 @@ enum picoboot_cmd_id { PC_REBOOT = 0x2, PC_FLASH_ERASE = 0x3, PC_READ = 0x84, // either RAM or FLASH - PC_WRITE = 5, // either RAM or FLASH (does no erase) + PC_WRITE = 0x5, // either RAM or FLASH (does no erase) PC_EXIT_XIP = 0x6, PC_ENTER_CMD_XIP = 0x7, PC_EXEC = 0x8, - PC_VECTORIZE_FLASH = 0x9 + PC_VECTORIZE_FLASH = 0x9, + // RP2350 only below here + PC_REBOOT2 = 0xa, + PC_GET_INFO = 0x8b, + PC_OTP_READ = 0x8c, + PC_OTP_WRITE = 0xd, + //PC_EXEC2 = 0xe, // currently unused }; enum picoboot_status { @@ -64,14 +72,32 @@ enum picoboot_status { PICOBOOT_INTERLEAVED_WRITE = 6, PICOBOOT_REBOOTING = 7, PICOBOOT_UNKNOWN_ERROR = 8, + PICOBOOT_INVALID_STATE = 9, + PICOBOOT_NOT_PERMITTED = 10, + PICOBOOT_INVALID_ARG = 11, + PICOBOOT_BUFFER_TOO_SMALL = 12, + PICOBOOT_PRECONDITION_NOT_MET = 13, + PICOBOOT_MODIFIED_DATA = 14, + PICOBOOT_INVALID_DATA = 15, + PICOBOOT_NOT_FOUND = 16, + PICOBOOT_UNSUPPORTED_MODIFICATION = 17, }; struct __packed picoboot_reboot_cmd { - uint32_t dPC; // 0 means reset into bootrom + uint32_t dPC; // 0 means reset into regular boot path uint32_t dSP; uint32_t dDelayMS; }; + +// note this (with pc_sp) union member has the same layout as picoboot_reboot_cmd except with extra dFlags +struct __packed picoboot_reboot2_cmd { + uint32_t dFlags; + uint32_t dDelayMS; + uint32_t dParam0; + uint32_t dParam1; +}; + // used for EXEC, VECTORIZE_FLASH struct __packed picoboot_address_only_cmd { uint32_t dAddr; @@ -83,6 +109,13 @@ struct __packed picoboot_range_cmd { uint32_t dSize; }; +struct __packed picoboot_exec2_cmd { + uint32_t image_base; + uint32_t image_size; + uint32_t workarea_base; + uint32_t workarea_size; +}; + enum picoboot_exclusive_type { NOT_EXCLUSIVE = 0, EXCLUSIVE, @@ -93,6 +126,20 @@ struct __packed picoboot_exclusive_cmd { uint8_t bExclusive; }; +struct __packed picoboot_otp_cmd { + uint16_t wRow; // OTP row + uint16_t wRowCount; // number of rows to transfer + uint8_t bEcc; // use error correction (16 bit per register vs 24 (stored as 32) bit raw) +}; + + +struct __packed picoboot_get_info_cmd { + uint8_t bType; + uint8_t bParam; + uint16_t wParam; + uint32_t dParams[3]; +}; + // little endian struct __packed __aligned(4) picoboot_cmd { uint32_t dMagic; @@ -107,9 +154,12 @@ struct __packed __aligned(4) picoboot_cmd { struct picoboot_range_cmd range_cmd; struct picoboot_address_only_cmd address_only_cmd; struct picoboot_exclusive_cmd exclusive_cmd; + struct picoboot_reboot2_cmd reboot2_cmd; + struct picoboot_otp_cmd otp_cmd; + struct picoboot_get_info_cmd get_info_cmd; + struct picoboot_exec2_cmd exec2_cmd; }; }; - static_assert(32 == sizeof(struct picoboot_cmd), "picoboot_cmd must be 32 bytes big"); struct __packed __aligned(4) picoboot_cmd_status { @@ -121,4 +171,5 @@ struct __packed __aligned(4) picoboot_cmd_status { }; static_assert(16 == sizeof(struct picoboot_cmd_status), "picoboot_cmd_status must be 16 bytes big"); + #endif diff --git a/lib/rp2040/boot/uf2.h b/lib/pico-sdk/boot/uf2.h index a040242b..271540a2 100644 --- a/lib/rp2040/boot/uf2.h +++ b/lib/pico-sdk/boot/uf2.h @@ -11,9 +11,9 @@ #include <assert.h> /** \file uf2.h -* \defgroup boot_uf2 boot_uf2 +* \defgroup boot_uf2_headers boot_uf2_headers * -* Header file for the UF2 format supported by an RP2040 in BOOTSEL mode. +* \brief Header file for the UF2 format supported by a RP2xxx chip in BOOTSEL mode */ #define UF2_MAGIC_START0 0x0A324655u @@ -25,7 +25,14 @@ #define UF2_FLAG_FAMILY_ID_PRESENT 0x00002000u #define UF2_FLAG_MD5_PRESENT 0x00004000u -#define RP2040_FAMILY_ID 0xe48bff56 +#define RP2040_FAMILY_ID 0xe48bff56u +#define ABSOLUTE_FAMILY_ID 0xe48bff57u +#define DATA_FAMILY_ID 0xe48bff58u +#define RP2350_ARM_S_FAMILY_ID 0xe48bff59u +#define RP2350_RISCV_FAMILY_ID 0xe48bff5au +#define RP2350_ARM_NS_FAMILY_ID 0xe48bff5bu +#define FAMILY_ID_MAX 0xe48bff5bu + struct uf2_block { // 32 byte header diff --git a/lib/rp2040/hardware/address_mapped.h b/lib/pico-sdk/hardware/address_mapped.h index d651f598..635a275b 100644 --- a/lib/rp2040/hardware/address_mapped.h +++ b/lib/pico-sdk/hardware/address_mapped.h @@ -10,12 +10,13 @@ //#include "pico.h" #define __force_inline inline #define static_assert(a,b) +#define valid_params_if(a,b) #include "hardware/regs/addressmap.h" /** \file address_mapped.h * \defgroup hardware_base hardware_base * - * Low-level types and (atomic) accessors for memory-mapped hardware registers + * \brief Low-level types and (atomic) accessors for memory-mapped hardware registers * * `hardware_base` defines the low level types and access functions for memory mapped hardware registers. It is included * by default by all other hardware libraries. @@ -36,7 +37,7 @@ * When dealing with these types, you will always use a pointer, i.e. `io_rw_32 *some_reg` is a pointer to a read/write * 32 bit register that you can write with `*some_reg = value`, or read with `value = *some_reg`. * - * RP2040 hardware is also aliased to provide atomic setting, clear or flipping of a subset of the bits within + * RP-series hardware is also aliased to provide atomic setting, clear or flipping of a subset of the bits within * a hardware register so that concurrent access by two cores is always consistent with one atomic operation * being performed first, followed by the second. * @@ -57,6 +58,14 @@ extern "C" { #define check_hw_layout(type, member, offset) static_assert(offsetof(type, member) == (offset), "hw offset mismatch") #define check_hw_size(type, size) static_assert(sizeof(type) == (size), "hw size mismatch") +// PICO_CONFIG: PARAM_ASSERTIONS_ENABLED_ADDRESS_ALIAS, Enable/disable assertions in memory address aliasing macros, type=bool, default=0, group=hardware_base +#ifndef PARAM_ASSERTIONS_ENABLED_ADDRESS_ALIAS +#define PARAM_ASSERTIONS_ENABLED_ADDRESS_ALIAS 0 +#endif + +typedef volatile uint64_t io_rw_64; +typedef const volatile uint64_t io_ro_64; +typedef volatile uint64_t io_wo_64; typedef volatile uint32_t io_rw_32; typedef const volatile uint32_t io_ro_32; typedef volatile uint32_t io_wo_32; @@ -70,15 +79,55 @@ typedef volatile uint8_t io_wo_8; typedef volatile uint8_t *const ioptr; typedef ioptr const const_ioptr; +// A non-functional (empty) helper macro to help IDEs follow links from the autogenerated +// hardware struct headers in hardware/structs/xxx.h to the raw register definitions +// in hardware/regs/xxx.h. A preprocessor define such as TIMER_TIMEHW_OFFSET (a timer register offset) +// is not generally clickable (in an IDE) if placed in a C comment, so _REG_(TIMER_TIMEHW_OFFSET) is +// included outside of a comment instead +#define _REG_(x) + +// Helper method used by hw_alias macros to optionally check input validity +#define hw_alias_check_addr(addr) ((uintptr_t)(addr)) +// can't use the following impl as it breaks existing static declarations using hw_alias, so would be a backwards incompatibility +//static __force_inline uint32_t hw_alias_check_addr(volatile void *addr) { +// uint32_t rc = (uintptr_t)addr; +// invalid_params_if(ADDRESS_ALIAS, rc < 0x40000000); // catch likely non HW pointer types +// return rc; +//} + +#if PICO_RP2040 +// Helper method used by xip_alias macros to optionally check input validity +__force_inline static uint32_t xip_alias_check_addr(const void *addr) { + uint32_t rc = (uintptr_t)addr; + valid_params_if(ADDRESS_ALIAS, rc >= XIP_MAIN_BASE && rc < XIP_NOALLOC_BASE); + return rc; +} +#else +//static __force_inline uint32_t xip_alias_check_addr(const void *addr) { +// uint32_t rc = (uintptr_t)addr; +// valid_params_if(ADDRESS_ALIAS, rc >= XIP_BASE && rc < XIP_END); +// return rc; +//} +#endif + // Untyped conversion alias pointer generation macros -#define hw_set_alias_untyped(addr) ((void *)(REG_ALIAS_SET_BITS | (uintptr_t)(addr))) -#define hw_clear_alias_untyped(addr) ((void *)(REG_ALIAS_CLR_BITS | (uintptr_t)(addr))) -#define hw_xor_alias_untyped(addr) ((void *)(REG_ALIAS_XOR_BITS | (uintptr_t)(addr))) +#define hw_set_alias_untyped(addr) ((void *)(REG_ALIAS_SET_BITS + hw_alias_check_addr(addr))) +#define hw_clear_alias_untyped(addr) ((void *)(REG_ALIAS_CLR_BITS + hw_alias_check_addr(addr))) +#define hw_xor_alias_untyped(addr) ((void *)(REG_ALIAS_XOR_BITS + hw_alias_check_addr(addr))) + +#if PICO_RP2040 +#define xip_noalloc_alias_untyped(addr) ((void *)(XIP_NOALLOC_BASE | xip_alias_check_addr(addr))) +#define xip_nocache_alias_untyped(addr) ((void *)(XIP_NOCACHE_BASE | xip_alias_check_addr(addr))) +#define xip_nocache_noalloc_alias_untyped(addr) ((void *)(XIP_NOCACHE_NOALLOC_BASE | xip_alias_check_addr(addr))) +#endif // Typed conversion alias pointer generation macros #define hw_set_alias(p) ((typeof(p))hw_set_alias_untyped(p)) #define hw_clear_alias(p) ((typeof(p))hw_clear_alias_untyped(p)) #define hw_xor_alias(p) ((typeof(p))hw_xor_alias_untyped(p)) +#define xip_noalloc_alias(p) ((typeof(p))xip_noalloc_alias_untyped(p)) +#define xip_nocache_alias(p) ((typeof(p))xip_nocache_alias_untyped(p)) +#define xip_nocache_noalloc_alias(p) ((typeof(p))xip_nocache_noalloc_alias_untyped(p)) /*! \brief Atomically set the specified bits to 1 in a HW register * \ingroup hardware_base @@ -126,6 +175,11 @@ __force_inline static void hw_write_masked(io_rw_32 *addr, uint32_t values, uint hw_xor_bits(addr, (*addr ^ values) & write_mask); } +#if !PICO_RP2040 +// include this here to avoid the check in every other hardware/structs header that needs it +#include "hardware/structs/accessctrl.h" +#endif + #ifdef __cplusplus } #endif diff --git a/lib/pico-sdk/pico-sdk.patch b/lib/pico-sdk/pico-sdk.patch new file mode 100644 index 00000000..0cdd4229 --- /dev/null +++ b/lib/pico-sdk/pico-sdk.patch @@ -0,0 +1,49 @@ +diff --git a/lib/pico-sdk/hardware/address_mapped.h b/lib/pico-sdk/hardware/address_mapped.h +index b384f5572..635a275b5 100644 +--- a/lib/pico-sdk/hardware/address_mapped.h ++++ b/lib/pico-sdk/hardware/address_mapped.h +@@ -7,7 +7,10 @@ + #ifndef _HARDWARE_ADDRESS_MAPPED_H + #define _HARDWARE_ADDRESS_MAPPED_H + +-#include "pico.h" ++//#include "pico.h" ++#define __force_inline inline ++#define static_assert(a,b) ++#define valid_params_if(a,b) + #include "hardware/regs/addressmap.h" + + /** \file address_mapped.h +diff --git a/lib/pico-sdk/rp2040/cmsis_include/RP2040.h b/lib/pico-sdk/rp2040/cmsis_include/RP2040.h +index 8da431fae..be661392c 100644 +--- a/lib/pico-sdk/rp2040/cmsis_include/RP2040.h ++++ b/lib/pico-sdk/rp2040/cmsis_include/RP2040.h +@@ -2572,6 +2572,7 @@ typedef struct { /*!< RTC Structure + * @{ + */ + ++#if 0 + #define RESETS_BASE 0x4000C000UL + #define PSM_BASE 0x40010000UL + #define CLOCKS_BASE 0x40008000UL +@@ -2608,6 +2609,7 @@ typedef struct { /*!< RTC Structure + #define TBMAN_BASE 0x4006C000UL + #define VREG_AND_CHIP_RESET_BASE 0x40064000UL + #define RTC_BASE 0x4005C000UL ++#endif + + /** @} */ /* End of group Device_Peripheral_peripheralAddr */ + +diff --git a/lib/pico-sdk/rp2040/pico/asm_helper.S b/lib/pico-sdk/rp2040/pico/asm_helper.S +index aff1fc9ae..59c67db19 100644 +--- a/lib/pico-sdk/rp2040/pico/asm_helper.S ++++ b/lib/pico-sdk/rp2040/pico/asm_helper.S +@@ -4,7 +4,7 @@ + * SPDX-License-Identifier: BSD-3-Clause + */ + +-#include "pico.h" ++//#include "pico.h" + + # note we don't do this by default in this file for backwards comaptibility with user code + # that may include this file, but not use unified syntax. Note that this macro does equivalent diff --git a/lib/rp2040/pico/platform.h b/lib/pico-sdk/pico/platform.h index 499bdf64..dca69f26 100644 --- a/lib/rp2040/pico/platform.h +++ b/lib/pico-sdk/pico/platform.h @@ -4,10 +4,11 @@ * SPDX-License-Identifier: BSD-3-Clause */ -#ifndef _PICO_PLATFORM_H_ -#define _PICO_PLATFORM_H_ +#ifndef _PICO_PLATFORM_H +#define _PICO_PLATFORM_H #include "hardware/platform_defs.h" +#include <stdint.h> #include <stddef.h> #ifdef __unix__ @@ -20,15 +21,21 @@ extern "C" { #endif -#define __not_in_flash(grup) +#define __not_in_flash(group) #define __not_in_flash_func(func) func -#define __no_inline_not_in_flash_func(func) +#define __no_inline_not_in_flash_func(func) func #define __in_flash(group) #define __scratch_x(group) #define __scratch_y(group) -#define __packed_aligned +#ifndef _MSC_VER +#define __packed __attribute__((packed)) +#define __packed_aligned __packed __attribute((aligned)) +#else +// MSVC requires #pragma pack which isn't compatible with a single attribute style define #define __packed +#define __packed_aligned +#endif #define __time_critical_func(x) x #define __after_data(group) @@ -60,6 +67,9 @@ extern void tight_loop_contents(); #define PICO_WEAK_FUNCTION_DEF(x) _Pragma(__STRING(weak x)) #define PICO_WEAK_FUNCTION_IMPL_NAME(x) x +#ifndef __weak +#define __weak __attribute__((weak)) +#endif #else #ifndef __noreturn #define __noreturn __declspec(noreturn) @@ -133,6 +143,12 @@ static inline int32_t __mul_instruction(int32_t a,int32_t b) static inline void __compiler_memory_barrier(void) { } + +uint get_core_num(); + +static inline uint __get_current_exception(void) { + return 0; +} #ifdef __cplusplus } #endif diff --git a/lib/pico-sdk/rp2040/boot_stage2/BUILD.bazel b/lib/pico-sdk/rp2040/boot_stage2/BUILD.bazel new file mode 100644 index 00000000..65c9e76b --- /dev/null +++ b/lib/pico-sdk/rp2040/boot_stage2/BUILD.bazel @@ -0,0 +1,146 @@ +# Always include these libraries through //src/rp2_common:*! +# This ensures that you'll get the right headers for the MCU you're targeting. + +load("@bazel_skylib//rules:copy_file.bzl", "copy_file") +load("@bazel_skylib//rules:run_binary.bzl", "run_binary") +load("@rules_python//python:defs.bzl", "py_binary") +load("//bazel/toolchain:objcopy.bzl", "objcopy_to_bin") +load("//bazel/util:multiple_choice_flag.bzl", "declare_flag_choices", "flag_choice") +load("//bazel/util:transition.bzl", "rp2040_bootloader_binary") + +# There's a lot of implementation details in here that shouldn't be considered +# stable, so allowlist visibility to just the public-facing pieces. +package(default_visibility = ["//visibility:private"]) + +# Known choices for boot2: +BOOT2_CHOICES = [ + "boot2_at25sf128a", + "boot2_generic_03h", + "boot2_is25lp080", + "boot2_usb_blinky", + "boot2_w25q080", + "boot2_w25x10cl", + "compile_time_choice", +] + +BOOT2_CHOICE_FILES = [c + ".S" for c in BOOT2_CHOICES] + +BOOT2_CHOICE_FILE_MAP = {c: [c + ".S"] for c in BOOT2_CHOICES} + +BOOT2_CHOICE_DEFINE_MAP = {c: ['PICO_BUILD_BOOT_STAGE2_NAME=\\"{}\\"'.format(c)] for c in BOOT2_CHOICES} + +# Define shouldn't be set for compile_time_choice. +BOOT2_CHOICE_DEFINE_MAP["compile_time_choice"] = [] + +cc_library( + name = "config", + hdrs = [ + "asminclude/boot2_helpers/exit_from_boot2.S", + "asminclude/boot2_helpers/read_flash_sreg.S", + "asminclude/boot2_helpers/wait_ssi_ready.S", + "include/boot_stage2/config.h", + ] + BOOT2_CHOICE_FILES, + defines = select(flag_choice( + "//bazel/config:PICO_DEFAULT_BOOT_STAGE2", + ":__pkg__", + BOOT2_CHOICE_DEFINE_MAP, + )), + includes = [ + "asminclude", + "include", + ], + target_compatible_with = ["//bazel/constraint:rp2040"], + visibility = ["//visibility:public"], +) + +# Creates a config_setting for each known boot2 option with the name: +# PICO_DEFAULT_BOOT_STAGE2_[choice] +declare_flag_choices( + "//bazel/config:PICO_DEFAULT_BOOT_STAGE2", + BOOT2_CHOICES, +) + +filegroup( + name = "build_selected_boot2", + srcs = select(flag_choice( + "//bazel/config:PICO_DEFAULT_BOOT_STAGE2", + ":__pkg__", + BOOT2_CHOICE_FILE_MAP, + )), + visibility = ["//src/rp2_common:__pkg__"], +) + +cc_binary( + name = "boot_stage2_elf_actual", + srcs = ["//bazel/config:PICO_DEFAULT_BOOT_STAGE2_FILE"], + copts = ["-fPIC"], + # Incompatible with section garbage collection. + features = ["-gc_sections"], + linkopts = [ + "-Wl,--no-gc-sections", + "-nostartfiles", + "-Wl,--entry=_stage2_boot", + "-T$(location boot_stage2.ld)", + ], + # this does nothing if someone passes --custom_malloc, so the + # rp2040_bootloader_binary transition forcibly clobbers --custom_malloc. + malloc = "//bazel:empty_cc_lib", + tags = ["manual"], # Only build as an explicit dependency. + target_compatible_with = ["//bazel/constraint:rp2040"], + deps = [ + "boot_stage2.ld", + ":config", + "//src/common/pico_base_headers", + "//src/rp2_common:pico_platform_internal", + ], +) + +# Always build the bootloader with the bootloader-specific platform. +rp2040_bootloader_binary( + name = "boot_stage2_elf", + src = "boot_stage2_elf_actual", +) + +objcopy_to_bin( + name = "boot_stage2_bin", + src = ":boot_stage2_elf", + out = "boot_stage2.bin", + target_compatible_with = ["//bazel/constraint:rp2040"], +) + +# WORKAROUND: Python rules always require a .py extension. +copy_file( + name = "copy_tool_to_py", + src = "pad_checksum", + out = "pad_checksum_tool.py", + target_compatible_with = ["//bazel/constraint:host"], +) + +py_binary( + name = "pad_checksum_tool", + srcs = ["pad_checksum_tool.py"], + target_compatible_with = ["//bazel/constraint:host"], +) + +run_binary( + name = "boot_stage2_padded", + srcs = [":boot_stage2_bin"], + outs = ["boot_stage2.S"], + args = [ + "-s 0xffffffff", + "$(location boot_stage2_bin)", + "$(location boot_stage2.S)", + ], + target_compatible_with = ["//bazel/constraint:rp2040"], + tool = ":pad_checksum_tool", +) + +cc_library( + name = "boot_stage2", + srcs = [":boot_stage2_padded"], + target_compatible_with = ["//bazel/constraint:rp2040"], + visibility = ["//src/rp2_common:__pkg__"], + # This isn't referenced as a symbol, so alwayslink is required to ensure + # it doesn't get dropped before the linker script can find it. + alwayslink = True, +) diff --git a/lib/rp2040/boot_stage2/CMakeLists.txt b/lib/pico-sdk/rp2040/boot_stage2/CMakeLists.txt index 73c3e3e9..c5768785 100644 --- a/lib/rp2040/boot_stage2/CMakeLists.txt +++ b/lib/pico-sdk/rp2040/boot_stage2/CMakeLists.txt @@ -1,10 +1,10 @@ -# PICO_CMAKE_CONFIG: PICO_DEFAULT_BOOT_STAGE2_FILE, Default boot stage 2 file to use unless overridden by pico_set_boot_stage2 on the TARGET; this setting is useful when explicitly setting the default build from a per board CMake file, group=build -# PICO_CMAKE_CONFIG: PICO_DEFAULT_BOOT_STAGE2, Simpler alternative to specifying PICO_DEFAULT_BOOT_STAGE2_FILE where the file is src/rp2_common/boot_stage2/{PICO_DEFAULT_BOOT_STAGE2}.S, default=compile_time_choice, group=build +# PICO_CMAKE_CONFIG: PICO_DEFAULT_BOOT_STAGE2_FILE, Default boot stage 2 file to use unless overridden by pico_set_boot_stage2 on the TARGET; this setting is useful when explicitly setting the default build from a per board CMake file, type=string, group=build +# PICO_CMAKE_CONFIG: PICO_DEFAULT_BOOT_STAGE2, Simpler alternative to specifying PICO_DEFAULT_BOOT_STAGE2_FILE where the latter is set to src/rp2_common/boot_stage2/{PICO_DEFAULT_BOOT_STAGE2}.S, type=string, default=compile_time_choice, group=build if (DEFINED ENV{PICO_DEFAULT_BOOT_STAGE2_FILE}) set(PICO_DEFAULT_BOOT_STAGE2_FILE $ENV{PICO_DEFAULT_BOOT_STAGE2_FILE}) message("Using PICO_DEFAULT_BOOT_STAGE2_FILE from environment ('${PICO_DEFAULT_BOOT_STAGE2_FILE}')") -elif (PICO_DEFAULT_BOOT_STAGE2_FILE) +elseif (PICO_DEFAULT_BOOT_STAGE2_FILE) # explicitly set, so cache it set(PICO_DEFAULT_BOOT_STAGE2_FILE "${PICO_DEFAULT_BOOT_STAGE2_FILE}" CACHE STRING "boot stage 2 source file" FORCE) endif() @@ -25,12 +25,13 @@ endif() if (NOT EXISTS ${PICO_DEFAULT_BOOT_STAGE2_FILE}) message(FATAL_ERROR "Specified boot stage 2 source '${PICO_DEFAULT_BOOT_STAGE2_FILE}' does not exist.") endif() +pico_register_common_scope_var(PICO_DEFAULT_BOOT_STAGE2_FILE) # needed by function below set(PICO_BOOT_STAGE2_DIR "${CMAKE_CURRENT_LIST_DIR}" CACHE INTERNAL "") add_library(boot_stage2_headers INTERFACE) -target_include_directories(boot_stage2_headers INTERFACE ${CMAKE_CURRENT_LIST_DIR}/include) +target_include_directories(boot_stage2_headers SYSTEM INTERFACE ${CMAKE_CURRENT_LIST_DIR}/include) # by convention the first source file name without extension is used for the binary info name function(pico_define_boot_stage2 NAME SOURCES) @@ -39,9 +40,9 @@ function(pico_define_boot_stage2 NAME SOURCES) ) # todo bit of an abstraction failure - revisit for Clang support anyway - if (CMAKE_C_COMPILER_ID STREQUAL "Clang") + if (PICO_C_COMPILER_IS_CLANG) target_link_options(${NAME} PRIVATE "-nostdlib") - else () + elseif (PICO_C_COMPILER_IS_GNU) target_link_options(${NAME} PRIVATE "--specs=nosys.specs") target_link_options(${NAME} PRIVATE "-nostartfiles") endif () @@ -62,12 +63,13 @@ function(pico_define_boot_stage2 NAME SOURCES) find_package (Python3 REQUIRED COMPONENTS Interpreter) add_custom_target(${NAME}_bin DEPENDS ${ORIGINAL_BIN}) - add_custom_command(OUTPUT ${ORIGINAL_BIN} DEPENDS ${NAME} COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${NAME}> ${ORIGINAL_BIN}) + add_custom_command(OUTPUT ${ORIGINAL_BIN} DEPENDS ${NAME} COMMAND ${CMAKE_OBJCOPY} -Obinary $<TARGET_FILE:${NAME}> ${ORIGINAL_BIN} + VERBATIM) add_custom_target(${NAME}_padded_checksummed_asm DEPENDS ${PADDED_CHECKSUMMED_ASM}) add_custom_command(OUTPUT ${PADDED_CHECKSUMMED_ASM} DEPENDS ${ORIGINAL_BIN} COMMAND ${Python3_EXECUTABLE} ${PICO_BOOT_STAGE2_DIR}/pad_checksum -s 0xffffffff ${ORIGINAL_BIN} ${PADDED_CHECKSUMMED_ASM} - ) + VERBATIM) add_library(${NAME}_library INTERFACE) add_dependencies(${NAME}_library ${NAME}_padded_checksummed_asm) @@ -98,3 +100,9 @@ endmacro() pico_define_boot_stage2(bs2_default ${PICO_DEFAULT_BOOT_STAGE2_FILE}) +# Create a new boot stage 2 target using the default implementation for the current build (PICO_BOARD derived) +function(pico_clone_default_boot_stage2 NAME) + pico_define_boot_stage2(${NAME} ${PICO_DEFAULT_BOOT_STAGE2_FILE}) +endfunction() + +pico_promote_common_scope_vars() diff --git a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/exit_from_boot2.S b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/exit_from_boot2.S index 6f06fc1d..6f06fc1d 100644 --- a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/exit_from_boot2.S +++ b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/exit_from_boot2.S diff --git a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/read_flash_sreg.S b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/read_flash_sreg.S index 83698ed6..83698ed6 100644 --- a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/read_flash_sreg.S +++ b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/read_flash_sreg.S diff --git a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/wait_ssi_ready.S b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/wait_ssi_ready.S index 2e49b648..2e49b648 100644 --- a/lib/rp2040/boot_stage2/asminclude/boot2_helpers/wait_ssi_ready.S +++ b/lib/pico-sdk/rp2040/boot_stage2/asminclude/boot2_helpers/wait_ssi_ready.S diff --git a/lib/rp2040/boot_stage2/boot2_at25sf128a.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_at25sf128a.S index be232ff1..72f751ed 100644 --- a/lib/rp2040/boot_stage2/boot2_at25sf128a.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_at25sf128a.S @@ -86,21 +86,18 @@ // Start of 2nd Stage Boot Code // ---------------------------------------------------------------------------- -.syntax unified -.cpu cortex-m0plus -.thumb +pico_default_asm_setup .section .text -// The exit point is passed in lr. If entered from bootrom, this will be the -// flash address immediately following this second stage (0x10000100). -// Otherwise it will be a return address -- second stage being called as a -// function by user code, after copying out of XIP region. r3 holds SSI base, -// r0...2 used as temporaries. Other GPRs not used. -.global _stage2_boot -.type _stage2_boot,%function -.thumb_func -_stage2_boot: +// lr will be zero on entry if entered from the bootrom, and the boot_stage2 is expected +// to continue into the binary via the vector table at 0x10000100. +// +// lr will be non-zero on entry if this code has been copied into RAM by user code and called +// from there, and the boot_stage2 should just return normally. +// +// r3 holds SSI base, r0...2 used as temporaries. Other GPRs not used. +regular_func _stage2_boot push {lr} // Set pad configuration: diff --git a/lib/rp2040/boot_stage2/boot2_generic_03h.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_generic_03h.S index cc7e4fbc..effef930 100644 --- a/lib/rp2040/boot_stage2/boot2_generic_03h.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_generic_03h.S @@ -16,10 +16,12 @@ // 4-byte checksum. Therefore code size cannot exceed 252 bytes. // ---------------------------------------------------------------------------- -//#include "pico/asm_helper.S" +#include "pico/asm_helper.S" #include "hardware/regs/addressmap.h" #include "hardware/regs/ssi.h" +pico_default_asm_setup + // ---------------------------------------------------------------------------- // Config section // ---------------------------------------------------------------------------- @@ -53,25 +55,26 @@ // Start of 2nd Stage Boot Code // ---------------------------------------------------------------------------- -.cpu cortex-m0 -.thumb - .section .text -.global _stage2_boot -.type _stage2_boot,%function -.thumb_func -_stage2_boot: +// lr will be zero on entry if entered from the bootrom, and the boot_stage2 is expected +// to continue into the binary via the vector table at 0x10000100. +// +// lr will be non-zero on entry if this code has been copied into RAM by user code and called +// from there, and the boot_stage2 should just return normally. +// +// r3 holds SSI base, r0...2 used as temporaries. Other GPRs not used. +regular_func _stage2_boot push {lr} ldr r3, =XIP_SSI_BASE // Use as base address where possible // Disable SSI to allow further config - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] // Set baud rate - mov r1, #PICO_FLASH_SPI_CLKDIV + movs r1, #PICO_FLASH_SPI_CLKDIV str r1, [r3, #SSI_BAUDR_OFFSET] ldr r1, =(CTRLR0_XIP) @@ -82,11 +85,11 @@ _stage2_boot: str r1, [r0] // NDF=0 (single 32b read) - mov r1, #0x0 + movs r1, #0x0 str r1, [r3, #SSI_CTRLR1_OFFSET] // Re-enable SSI - mov r1, #1 + movs r1, #1 str r1, [r3, #SSI_SSIENR_OFFSET] // We are now in XIP mode. Any bus accesses to the XIP address window will be diff --git a/lib/rp2040/boot_stage2/boot2_is25lp080.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_is25lp080.S index 80bf9d11..fda0f992 100644 --- a/lib/rp2040/boot_stage2/boot2_is25lp080.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_is25lp080.S @@ -80,25 +80,27 @@ // Start of 2nd Stage Boot Code // ---------------------------------------------------------------------------- -.cpu cortex-m0 -.thumb +pico_default_asm_setup .section .text - -.global _stage2_boot -.type _stage2_boot,%function -.thumb_func -_stage2_boot: +// lr will be zero on entry if entered from the bootrom, and the boot_stage2 is expected +// to continue into the binary via the vector table at 0x10000100. +// +// lr will be non-zero on entry if this code has been copied into RAM by user code and called +// from there, and the boot_stage2 should just return normally. +// +// r3 holds SSI base, r0...2 used as temporaries. Other GPRs not used. +regular_func _stage2_boot push {lr} ldr r3, =XIP_SSI_BASE // Use as base address where possible // Disable SSI to allow further config - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] // Set baud rate - mov r1, #PICO_FLASH_SPI_CLKDIV + movs r1, #PICO_FLASH_SPI_CLKDIV str r1, [r3, #SSI_BAUDR_OFFSET] // On QSPI parts we usually need a 01h SR-write command to enable QSPI mode @@ -113,7 +115,7 @@ program_sregs: str r1, [r3, #SSI_CTRLR0_OFFSET] // Enable SSI and select slave 0 - mov r1, #1 + movs r1, #1 str r1, [r3, #SSI_SSIENR_OFFSET] // Check whether SR needs updating @@ -124,7 +126,7 @@ program_sregs: beq skip_sreg_programming // Send write enable command - mov r1, #CMD_WRITE_ENABLE + movs r1, #CMD_WRITE_ENABLE str r1, [r3, #SSI_DR0_OFFSET] // Poll for completion and discard RX @@ -132,9 +134,9 @@ program_sregs: ldr r1, [r3, #SSI_DR0_OFFSET] // Send status write command followed by data bytes - mov r1, #CMD_WRITE_STATUS + movs r1, #CMD_WRITE_STATUS str r1, [r3, #SSI_DR0_OFFSET] - mov r0, #0 + movs r0, #0 str r2, [r3, #SSI_DR0_OFFSET] bl wait_ssi_ready @@ -145,7 +147,7 @@ program_sregs: 1: ldr r0, =CMD_READ_STATUS bl read_flash_sreg - mov r1, #1 + movs r1, #1 tst r0, r1 bne 1b @@ -157,7 +159,7 @@ skip_sreg_programming: // bl wait_ssi_ready // Disable SSI again so that it can be reconfigured - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] #endif @@ -182,7 +184,7 @@ dummy_read: ldr r1, =(CTRLR0_ENTER_XIP) str r1, [r3, #SSI_CTRLR0_OFFSET] - mov r1, #0x0 // NDF=0 (single 32b read) + movs r1, #0x0 // NDF=0 (single 32b read) str r1, [r3, #SSI_CTRLR1_OFFSET] #define SPI_CTRLR0_ENTER_XIP \ @@ -197,12 +199,12 @@ dummy_read: ldr r0, =(XIP_SSI_BASE + SSI_SPI_CTRLR0_OFFSET) // SPI_CTRL0 Register str r1, [r0] - mov r1, #1 // Re-enable SSI + movs r1, #1 // Re-enable SSI str r1, [r3, #SSI_SSIENR_OFFSET] - mov r1, #CMD_READ + movs r1, #CMD_READ str r1, [r3, #SSI_DR0_OFFSET] // Push SPI command into TX FIFO - mov r1, #MODE_CONTINUOUS_READ // 32-bit: 24 address bits (we don't care, so 0) and M[7:4]=1010 + movs r1, #MODE_CONTINUOUS_READ // 32-bit: 24 address bits (we don't care, so 0) and M[7:4]=1010 str r1, [r3, #SSI_DR0_OFFSET] // Push Address into TX FIFO - this will trigger the transaction // Poll for completion @@ -218,7 +220,7 @@ dummy_read: // to APM mode and generate a 28-bit address phase with the extra nibble set // to 4'b0000). - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] // Disable SSI (and clear FIFO) to allow further config // Note that the INST_L field is used to select what XIP data gets pushed into @@ -240,7 +242,7 @@ configure_ssi: ldr r0, =(XIP_SSI_BASE + SSI_SPI_CTRLR0_OFFSET) str r1, [r0] - mov r1, #1 + movs r1, #1 str r1, [r3, #SSI_SSIENR_OFFSET] // Re-enable SSI // We are now in XIP mode, with all transactions using Dual I/O and only diff --git a/lib/rp2040/boot_stage2/boot2_usb_blinky.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_usb_blinky.S index 74c47a3e..0249a455 100644 --- a/lib/rp2040/boot_stage2/boot2_usb_blinky.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_usb_blinky.S @@ -4,6 +4,8 @@ * SPDX-License-Identifier: BSD-3-Clause */ +#include "pico/asm_helper.S" + // Stub second stage which calls into USB bootcode, with parameters. // USB boot takes two parameters: // - A GPIO mask for activity LED -- if mask is 0, don't touch GPIOs at all @@ -19,17 +21,12 @@ #define ACTIVITY_LED 0 #define BOOT_MODE USB_BOOT_MSD_AND_PICOBOOT -.cpu cortex-m0 -.thumb +pico_default_asm_setup .section .text -.global _stage2_boot -.type _stage2_boot,%function - -.thumb_func -_stage2_boot: - mov r7, #0x14 // Pointer to _well_known pointer table in ROM +regular_func _stage2_boot + movs r7, #0x14 // Pointer to _well_known pointer table in ROM ldrh r0, [r7, #0] // Offset 0 is 16 bit pointer to function table ldrh r7, [r7, #4] // Offset 4 is 16 bit pointer to table lookup routine ldr r1, =('U' | ('B' << 8)) // Symbol for USB Boot @@ -39,7 +36,7 @@ _stage2_boot: mov r7, r0 ldr r0, =(1u << ACTIVITY_LED) // Mask of which GPIO (or GPIOs) to use - mov r1, #BOOT_MODE + movs r1, #BOOT_MODE blx r7 dead: diff --git a/lib/rp2040/boot_stage2/boot2_w25q080.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_w25q080.S index 8fb3def4..c35fb81f 100644 --- a/lib/rp2040/boot_stage2/boot2_w25q080.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_w25q080.S @@ -26,7 +26,7 @@ // 4-byte checksum. Therefore code size cannot exceed 252 bytes. // ---------------------------------------------------------------------------- -//#include "pico/asm_helper.S" +#include "pico/asm_helper.S" #include "hardware/regs/addressmap.h" #include "hardware/regs/ssi.h" #include "hardware/regs/pads_qspi.h" @@ -86,21 +86,18 @@ // Start of 2nd Stage Boot Code // ---------------------------------------------------------------------------- -.syntax unified -.cpu cortex-m0plus -.thumb +pico_default_asm_setup .section .text -// The exit point is passed in lr. If entered from bootrom, this will be the -// flash address immediately following this second stage (0x10000100). -// Otherwise it will be a return address -- second stage being called as a -// function by user code, after copying out of XIP region. r3 holds SSI base, -// r0...2 used as temporaries. Other GPRs not used. -.global _stage2_boot -.type _stage2_boot,%function -.thumb_func -_stage2_boot: +// lr will be zero on entry if entered from the bootrom, and the boot_stage2 is expected +// to continue into the binary via the vector table at 0x10000100. +// +// lr will be non-zero on entry if this code has been copied into RAM by user code and called +// from there, and the boot_stage2 should just return normally. +// +// r3 holds SSI base, r0...2 used as temporaries. Other GPRs not used. +regular_func _stage2_boot push {lr} // Set pad configuration: diff --git a/lib/rp2040/boot_stage2/boot2_w25x10cl.S b/lib/pico-sdk/rp2040/boot_stage2/boot2_w25x10cl.S index 02628d4e..9aa51ac5 100644 --- a/lib/rp2040/boot_stage2/boot2_w25x10cl.S +++ b/lib/pico-sdk/rp2040/boot_stage2/boot2_w25x10cl.S @@ -40,6 +40,8 @@ #define PICO_FLASH_SPI_CLKDIV 4 #endif +pico_default_asm_setup + // ---------------------------------------------------------------------------- // The "System Control Block" is a set of internal Cortex-M0+ control registers // that are memory mapped and accessed like any other H/W register. They have @@ -69,31 +71,30 @@ // Start of 2nd Stage Boot Code // ---------------------------------------------------------------------------- -.cpu cortex-m0 -.thumb - .org 0 .section .text -// This code will get copied to 0x20000000 and then executed - -.global _stage2_boot -.type _stage2_boot,%function -.thumb_func -_stage2_boot: +// lr will be zero on entry if entered from the bootrom, and the boot_stage2 is expected +// to continue into the binary via the vector table at 0x10000100. +// +// lr will be non-zero on entry if this code has been copied into RAM by user code and called +// from there, and the boot_stage2 should just return normally. +// +// r3 holds SSI base, r0...2 used as temporaries. Other GPRs not used. +regular_func _stage2_boot push {lr} ldr r3, =XIP_SSI_BASE // Use as base address where possible // We are primarily interested in setting up Flash for DSPI XIP w/ continuous read - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] // Disable SSI to allow further config // The Boot ROM sets a very conservative SPI clock frequency to be sure it can // read the initial 256 bytes from any device. Here we can be more aggressive. - mov r1, #PICO_FLASH_SPI_CLKDIV + movs r1, #PICO_FLASH_SPI_CLKDIV str r1, [r3, #SSI_BAUDR_OFFSET] // Set SSI Clock // First we need to send the initial command to get us in to Fast Read Dual I/O @@ -116,7 +117,7 @@ _stage2_boot: ldr r1, =(CTRLR0_ENTER_XIP) str r1, [r3, #SSI_CTRLR0_OFFSET] - mov r1, #0x0 // NDF=0 (single 32b read) + movs r1, #0x0 // NDF=0 (single 32b read) str r1, [r3, #SSI_CTRLR1_OFFSET] #define SPI_CTRLR0_ENTER_XIP \ @@ -131,18 +132,18 @@ _stage2_boot: ldr r0, =(XIP_SSI_BASE + SSI_SPI_CTRLR0_OFFSET) // SPI_CTRL0 Register str r1, [r0] - mov r1, #1 // Re-enable SSI + movs r1, #1 // Re-enable SSI str r1, [r3, #SSI_SSIENR_OFFSET] - mov r1, #W25X10CL_CMD_READ_DATA_FAST_DUAL_IO // 8b command = 0xBB + movs r1, #W25X10CL_CMD_READ_DATA_FAST_DUAL_IO // 8b command = 0xBB str r1, [r3, #SSI_DR0_OFFSET] // Push SPI command into TX FIFO - mov r1, #0x0000002 // 28-bit Address for dummy read = 0x000000 + 0x2 Mode bits to set M[5:4]=10 + movs r1, #0x0000002 // 28-bit Address for dummy read = 0x000000 + 0x2 Mode bits to set M[5:4]=10 str r1, [r3, #SSI_DR0_OFFSET] // Push Address into TX FIFO - this will trigger the transaction // Now we wait for the read transaction to complete by monitoring the SSI // status register and checking for the "RX FIFO Not Empty" flag to assert. - mov r1, #SSI_SR_RFNE_BITS + movs r1, #SSI_SR_RFNE_BITS 00: ldr r0, [r3, #SSI_SR_OFFSET] // Read status register tst r0, r1 // RFNE status flag set? @@ -158,7 +159,7 @@ _stage2_boot: // to APM mode and generate a 28-bit address phase with the extra nibble set // to 4'b0000). - mov r1, #0 + movs r1, #0 str r1, [r3, #SSI_SSIENR_OFFSET] // Disable SSI (and clear FIFO) to allow further config // Note that the INST_L field is used to select what XIP data gets pushed into @@ -180,7 +181,7 @@ _stage2_boot: ldr r0, =(XIP_SSI_BASE + SSI_SPI_CTRLR0_OFFSET) str r1, [r0] - mov r1, #1 + movs r1, #1 str r1, [r3, #SSI_SSIENR_OFFSET] // Re-enable SSI // We are now in XIP mode, with all transactions using Dual I/O and only diff --git a/lib/rp2040/boot_stage2/boot_stage2.ld b/lib/pico-sdk/rp2040/boot_stage2/boot_stage2.ld index f8669ab6..f8669ab6 100644 --- a/lib/rp2040/boot_stage2/boot_stage2.ld +++ b/lib/pico-sdk/rp2040/boot_stage2/boot_stage2.ld diff --git a/lib/rp2040/boot_stage2/compile_time_choice.S b/lib/pico-sdk/rp2040/boot_stage2/compile_time_choice.S index 5aa2b96c..5aa2b96c 100644 --- a/lib/rp2040/boot_stage2/compile_time_choice.S +++ b/lib/pico-sdk/rp2040/boot_stage2/compile_time_choice.S diff --git a/lib/rp2040/boot_stage2/doc.h b/lib/pico-sdk/rp2040/boot_stage2/doc.h index 483dd682..483dd682 100644 --- a/lib/rp2040/boot_stage2/doc.h +++ b/lib/pico-sdk/rp2040/boot_stage2/doc.h diff --git a/lib/rp2040/boot_stage2/include/boot_stage2/config.h b/lib/pico-sdk/rp2040/boot_stage2/include/boot_stage2/config.h index 5e57f953..e4d32628 100644 --- a/lib/rp2040/boot_stage2/include/boot_stage2/config.h +++ b/lib/pico-sdk/rp2040/boot_stage2/include/boot_stage2/config.h @@ -4,12 +4,12 @@ * SPDX-License-Identifier: BSD-3-Clause */ -#ifndef _BOOT_STAGE2_CONFIG_H_ -#define _BOOT_STAGE2_CONFIG_H_ +#ifndef _BOOT_STAGE2_CONFIG_H +#define _BOOT_STAGE2_CONFIG_H // NOTE THIS HEADER IS INCLUDED FROM ASSEMBLY -#include "pico/config.h" +#include "pico.h" // PICO_CONFIG: PICO_BUILD_BOOT_STAGE2_NAME, The name of the boot stage 2 if selected by the build, group=boot_stage2 #ifdef PICO_BUILD_BOOT_STAGE2_NAME @@ -85,10 +85,7 @@ #error no boot stage 2 is defined by PICO_BOOT_STAGE2_CHOOSE_ macro #endif // we can't include cdefs in assembly, so define our own, but avoid conflict with real ones for c inclusion - #define _PICO__STRING(x) #x - #define _PICO__XSTRING(x) _PICO__STRING(x) - #define _PICO__CONCAT1(x, y) x ## y - #define PICO_BOOT_STAGE2_NAME _PICO__XSTRING(_BOOT_STAGE2) - #define PICO_BOOT_STAGE2_ASM _PICO__XSTRING(_PICO__CONCAT1(_BOOT_STAGE2,.S)) + #define PICO_BOOT_STAGE2_NAME __PICO_XSTRING(_BOOT_STAGE2) + #define PICO_BOOT_STAGE2_ASM __PICO_XSTRING(__PICO_CONCAT1(_BOOT_STAGE2,.S)) #endif #endif diff --git a/lib/rp2040/boot_stage2/pad_checksum b/lib/pico-sdk/rp2040/boot_stage2/pad_checksum index 356227d5..d3017568 100755 --- a/lib/rp2040/boot_stage2/pad_checksum +++ b/lib/pico-sdk/rp2040/boot_stage2/pad_checksum @@ -31,7 +31,7 @@ try: except: sys.exit("Could not open input file '{}'".format(args.ifile)) -if len(idata) >= args.pad - 4: +if len(idata) > args.pad - 4: sys.exit("Input file size ({} bytes) too large for final size ({} bytes)".format(len(idata), args.pad)) idata_padded = idata + bytes(args.pad - 4 - len(idata)) diff --git a/lib/pico-sdk/rp2040/cmsis_include/RP2040.h b/lib/pico-sdk/rp2040/cmsis_include/RP2040.h new file mode 100644 index 00000000..be661392 --- /dev/null +++ b/lib/pico-sdk/rp2040/cmsis_include/RP2040.h @@ -0,0 +1,2675 @@ +/* + * Copyright (c) 2024 Raspberry Pi Ltd. SPDX-License-Identifier: BSD-3-Clause + * + * @file src/rp2_common/cmsis/stub/CMSIS/Device/RP2040/Include/RP2040.h + * @brief CMSIS HeaderFile + * @version 0.1 + * @date Tue Aug 6 18:22:05 2024 + * @note Generated by SVDConv V3.3.47 + * from File 'src/rp2_common/cmsis/../../rp2040/hardware_regs/RP2040.svd', + * last modified on Tue Aug 6 17:58:50 2024 + */ + + +/** @addtogroup Raspberry Pi + * @{ + */ + + +/** @addtogroup RP2040 + * @{ + */ + + +#ifndef RP2040_H +#define RP2040_H + +#ifdef __cplusplus +extern "C" { +#endif + + +/** @addtogroup Configuration_of_CMSIS + * @{ + */ + + + +/* =========================================================================================================================== */ +/* ================ Interrupt Number Definition ================ */ +/* =========================================================================================================================== */ + +typedef enum { +/* ======================================= ARM Cortex-M0+ Specific Interrupt Numbers ======================================= */ + Reset_IRQn = -15, /*!< -15 Reset Vector, invoked on Power up and warm reset */ + NonMaskableInt_IRQn = -14, /*!< -14 Non maskable Interrupt, cannot be stopped or preempted */ + HardFault_IRQn = -13, /*!< -13 Hard Fault, all classes of Fault */ + SVCall_IRQn = -5, /*!< -5 System Service Call via SVC instruction */ + PendSV_IRQn = -2, /*!< -2 Pendable request for system service */ + SysTick_IRQn = -1, /*!< -1 System Tick Timer */ +/* =========================================== RP2040 Specific Interrupt Numbers =========================================== */ + TIMER_IRQ_0_IRQn = 0, /*!< 0 TIMER_IRQ_0 */ + TIMER_IRQ_1_IRQn = 1, /*!< 1 TIMER_IRQ_1 */ + TIMER_IRQ_2_IRQn = 2, /*!< 2 TIMER_IRQ_2 */ + TIMER_IRQ_3_IRQn = 3, /*!< 3 TIMER_IRQ_3 */ + PWM_IRQ_WRAP_IRQn = 4, /*!< 4 PWM_IRQ_WRAP */ + USBCTRL_IRQ_IRQn = 5, /*!< 5 USBCTRL_IRQ */ + XIP_IRQ_IRQn = 6, /*!< 6 XIP_IRQ */ + PIO0_IRQ_0_IRQn = 7, /*!< 7 PIO0_IRQ_0 */ + PIO0_IRQ_1_IRQn = 8, /*!< 8 PIO0_IRQ_1 */ + PIO1_IRQ_0_IRQn = 9, /*!< 9 PIO1_IRQ_0 */ + PIO1_IRQ_1_IRQn = 10, /*!< 10 PIO1_IRQ_1 */ + DMA_IRQ_0_IRQn = 11, /*!< 11 DMA_IRQ_0 */ + DMA_IRQ_1_IRQn = 12, /*!< 12 DMA_IRQ_1 */ + IO_IRQ_BANK0_IRQn = 13, /*!< 13 IO_IRQ_BANK0 */ + IO_IRQ_QSPI_IRQn = 14, /*!< 14 IO_IRQ_QSPI */ + SIO_IRQ_PROC0_IRQn = 15, /*!< 15 SIO_IRQ_PROC0 */ + SIO_IRQ_PROC1_IRQn = 16, /*!< 16 SIO_IRQ_PROC1 */ + CLOCKS_IRQ_IRQn = 17, /*!< 17 CLOCKS_IRQ */ + SPI0_IRQ_IRQn = 18, /*!< 18 SPI0_IRQ */ + SPI1_IRQ_IRQn = 19, /*!< 19 SPI1_IRQ */ + UART0_IRQ_IRQn = 20, /*!< 20 UART0_IRQ */ + UART1_IRQ_IRQn = 21, /*!< 21 UART1_IRQ */ + ADC_IRQ_FIFO_IRQn = 22, /*!< 22 ADC_IRQ_FIFO */ + I2C0_IRQ_IRQn = 23, /*!< 23 I2C0_IRQ */ + I2C1_IRQ_IRQn = 24, /*!< 24 I2C1_IRQ */ + RTC_IRQ_IRQn = 25 /*!< 25 RTC_IRQ */ +} IRQn_Type; + + + +/* =========================================================================================================================== */ +/* ================ Processor and Core Peripheral Section ================ */ +/* =========================================================================================================================== */ + +/* ========================== Configuration of the ARM Cortex-M0+ Processor and Core Peripherals =========================== */ +#define __CM0PLUS_REV 0x0001U /*!< CM0PLUS Core Revision */ +#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */ +#define __MPU_PRESENT 1 /*!< MPU present */ +#define __FPU_PRESENT 0 /*!< FPU present */ + + +/** @} */ /* End of group Configuration_of_CMSIS */ + +#include "core_cm0plus.h" /*!< ARM Cortex-M0+ processor and core peripherals */ +#include "system_RP2040.h" /*!< RP2040 System */ + +#ifndef __IM /*!< Fallback for older CMSIS versions */ + #define __IM __I +#endif +#ifndef __OM /*!< Fallback for older CMSIS versions */ + #define __OM __O +#endif +#ifndef __IOM /*!< Fallback for older CMSIS versions */ + #define __IOM __IO +#endif + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Section ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_peripherals + * @{ + */ + + + +/* =========================================================================================================================== */ +/* ================ RESETS ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief RESETS (RESETS) + */ + +typedef struct { /*!< RESETS Structure */ + __IOM uint32_t RESET; /*!< Reset control. If a bit is set it means the peripheral is in + reset. 0 means the peripheral's reset is deasserted. */ + __IOM uint32_t WDSEL; /*!< Watchdog select. If a bit is set then the watchdog will reset + this peripheral when the watchdog fires. */ + __IOM uint32_t RESET_DONE; /*!< Reset done. If a bit is set then a reset done signal has been + returned by the peripheral. This indicates that the peripheral's + registers are ready to be accessed. */ +} RESETS_Type; /*!< Size = 12 (0xc) */ + + + +/* =========================================================================================================================== */ +/* ================ PSM ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief PSM (PSM) + */ + +typedef struct { /*!< PSM Structure */ + __IOM uint32_t FRCE_ON; /*!< Force block out of reset (i.e. power it on) */ + __IOM uint32_t FRCE_OFF; /*!< Force into reset (i.e. power it off) */ + __IOM uint32_t WDSEL; /*!< Set to 1 if this peripheral should be reset when the watchdog + fires. */ + __IOM uint32_t DONE; /*!< Indicates the peripheral's registers are ready to access. */ +} PSM_Type; /*!< Size = 16 (0x10) */ + + + +/* =========================================================================================================================== */ +/* ================ CLOCKS ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief CLOCKS (CLOCKS) + */ + +typedef struct { /*!< CLOCKS Structure */ + __IOM uint32_t CLK_GPOUT0_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_GPOUT0_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_GPOUT0_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_GPOUT1_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_GPOUT1_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_GPOUT1_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_GPOUT2_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_GPOUT2_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_GPOUT2_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_GPOUT3_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_GPOUT3_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_GPOUT3_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_REF_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_REF_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_REF_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_SYS_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_SYS_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_SYS_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_PERI_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_PERI_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_PERI_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_USB_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_USB_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_USB_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_ADC_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_ADC_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_ADC_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_RTC_CTRL; /*!< Clock control, can be changed on-the-fly (except for auxsrc) */ + __IOM uint32_t CLK_RTC_DIV; /*!< Clock divisor, can be changed on-the-fly */ + __IOM uint32_t CLK_RTC_SELECTED; /*!< Indicates which SRC is currently selected by the glitchless + mux (one-hot). */ + __IOM uint32_t CLK_SYS_RESUS_CTRL; /*!< CLK_SYS_RESUS_CTRL */ + __IOM uint32_t CLK_SYS_RESUS_STATUS; /*!< CLK_SYS_RESUS_STATUS */ + __IOM uint32_t FC0_REF_KHZ; /*!< Reference clock frequency in kHz */ + __IOM uint32_t FC0_MIN_KHZ; /*!< Minimum pass frequency in kHz. This is optional. Set to 0 if + you are not using the pass/fail flags */ + __IOM uint32_t FC0_MAX_KHZ; /*!< Maximum pass frequency in kHz. This is optional. Set to 0x1ffffff + if you are not using the pass/fail flags */ + __IOM uint32_t FC0_DELAY; /*!< Delays the start of frequency counting to allow the mux to settle + Delay is measured in multiples of the reference clock period */ + __IOM uint32_t FC0_INTERVAL; /*!< The test interval is 0.98us * 2**interval, but let's call it + 1us * 2**interval The default gives a test interval of + 250us */ + __IOM uint32_t FC0_SRC; /*!< Clock sent to frequency counter, set to 0 when not required + Writing to this register initiates the frequency count */ + __IOM uint32_t FC0_STATUS; /*!< Frequency counter status */ + __IOM uint32_t FC0_RESULT; /*!< Result of frequency measurement, only valid when status_done=1 */ + __IOM uint32_t WAKE_EN0; /*!< enable clock in wake mode */ + __IOM uint32_t WAKE_EN1; /*!< enable clock in wake mode */ + __IOM uint32_t SLEEP_EN0; /*!< enable clock in sleep mode */ + __IOM uint32_t SLEEP_EN1; /*!< enable clock in sleep mode */ + __IOM uint32_t ENABLED0; /*!< indicates the state of the clock enable */ + __IOM uint32_t ENABLED1; /*!< indicates the state of the clock enable */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} CLOCKS_Type; /*!< Size = 200 (0xc8) */ + + + +/* =========================================================================================================================== */ +/* ================ PADS_BANK0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief PADS_BANK0 (PADS_BANK0) + */ + +typedef struct { /*!< PADS_BANK0 Structure */ + __IOM uint32_t VOLTAGE_SELECT; /*!< Voltage select. Per bank control */ + __IOM uint32_t GPIO0; /*!< Pad control register */ + __IOM uint32_t GPIO1; /*!< Pad control register */ + __IOM uint32_t GPIO2; /*!< Pad control register */ + __IOM uint32_t GPIO3; /*!< Pad control register */ + __IOM uint32_t GPIO4; /*!< Pad control register */ + __IOM uint32_t GPIO5; /*!< Pad control register */ + __IOM uint32_t GPIO6; /*!< Pad control register */ + __IOM uint32_t GPIO7; /*!< Pad control register */ + __IOM uint32_t GPIO8; /*!< Pad control register */ + __IOM uint32_t GPIO9; /*!< Pad control register */ + __IOM uint32_t GPIO10; /*!< Pad control register */ + __IOM uint32_t GPIO11; /*!< Pad control register */ + __IOM uint32_t GPIO12; /*!< Pad control register */ + __IOM uint32_t GPIO13; /*!< Pad control register */ + __IOM uint32_t GPIO14; /*!< Pad control register */ + __IOM uint32_t GPIO15; /*!< Pad control register */ + __IOM uint32_t GPIO16; /*!< Pad control register */ + __IOM uint32_t GPIO17; /*!< Pad control register */ + __IOM uint32_t GPIO18; /*!< Pad control register */ + __IOM uint32_t GPIO19; /*!< Pad control register */ + __IOM uint32_t GPIO20; /*!< Pad control register */ + __IOM uint32_t GPIO21; /*!< Pad control register */ + __IOM uint32_t GPIO22; /*!< Pad control register */ + __IOM uint32_t GPIO23; /*!< Pad control register */ + __IOM uint32_t GPIO24; /*!< Pad control register */ + __IOM uint32_t GPIO25; /*!< Pad control register */ + __IOM uint32_t GPIO26; /*!< Pad control register */ + __IOM uint32_t GPIO27; /*!< Pad control register */ + __IOM uint32_t GPIO28; /*!< Pad control register */ + __IOM uint32_t GPIO29; /*!< Pad control register */ + __IOM uint32_t SWCLK; /*!< Pad control register */ + __IOM uint32_t SWD; /*!< Pad control register */ +} PADS_BANK0_Type; /*!< Size = 132 (0x84) */ + + + +/* =========================================================================================================================== */ +/* ================ PADS_QSPI ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief PADS_QSPI (PADS_QSPI) + */ + +typedef struct { /*!< PADS_QSPI Structure */ + __IOM uint32_t VOLTAGE_SELECT; /*!< Voltage select. Per bank control */ + __IOM uint32_t GPIO_QSPI_SCLK; /*!< Pad control register */ + __IOM uint32_t GPIO_QSPI_SD0; /*!< Pad control register */ + __IOM uint32_t GPIO_QSPI_SD1; /*!< Pad control register */ + __IOM uint32_t GPIO_QSPI_SD2; /*!< Pad control register */ + __IOM uint32_t GPIO_QSPI_SD3; /*!< Pad control register */ + __IOM uint32_t GPIO_QSPI_SS; /*!< Pad control register */ +} PADS_QSPI_Type; /*!< Size = 28 (0x1c) */ + + + +/* =========================================================================================================================== */ +/* ================ IO_QSPI ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief IO_QSPI (IO_QSPI) + */ + +typedef struct { /*!< IO_QSPI Structure */ + __IOM uint32_t GPIO_QSPI_SCLK_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SCLK_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO_QSPI_SS_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SS_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO_QSPI_SD0_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SD0_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO_QSPI_SD1_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SD1_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO_QSPI_SD2_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SD2_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO_QSPI_SD3_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO_QSPI_SD3_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t PROC0_INTE; /*!< Interrupt Enable for proc0 */ + __IOM uint32_t PROC0_INTF; /*!< Interrupt Force for proc0 */ + __IOM uint32_t PROC0_INTS; /*!< Interrupt status after masking & forcing for proc0 */ + __IOM uint32_t PROC1_INTE; /*!< Interrupt Enable for proc1 */ + __IOM uint32_t PROC1_INTF; /*!< Interrupt Force for proc1 */ + __IOM uint32_t PROC1_INTS; /*!< Interrupt status after masking & forcing for proc1 */ + __IOM uint32_t DORMANT_WAKE_INTE; /*!< Interrupt Enable for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTF; /*!< Interrupt Force for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTS; /*!< Interrupt status after masking & forcing for dormant_wake */ +} IO_QSPI_Type; /*!< Size = 88 (0x58) */ + + + +/* =========================================================================================================================== */ +/* ================ IO_BANK0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief IO_BANK0 (IO_BANK0) + */ + +typedef struct { /*!< IO_BANK0 Structure */ + __IOM uint32_t GPIO0_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO0_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO1_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO1_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO2_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO2_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO3_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO3_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO4_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO4_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO5_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO5_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO6_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO6_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO7_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO7_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO8_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO8_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO9_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO9_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO10_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO10_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO11_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO11_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO12_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO12_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO13_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO13_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO14_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO14_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO15_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO15_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO16_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO16_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO17_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO17_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO18_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO18_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO19_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO19_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO20_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO20_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO21_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO21_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO22_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO22_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO23_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO23_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO24_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO24_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO25_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO25_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO26_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO26_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO27_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO27_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO28_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO28_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t GPIO29_STATUS; /*!< GPIO status */ + __IOM uint32_t GPIO29_CTRL; /*!< GPIO control including function select and overrides. */ + __IOM uint32_t INTR0; /*!< Raw Interrupts */ + __IOM uint32_t INTR1; /*!< Raw Interrupts */ + __IOM uint32_t INTR2; /*!< Raw Interrupts */ + __IOM uint32_t INTR3; /*!< Raw Interrupts */ + __IOM uint32_t PROC0_INTE0; /*!< Interrupt Enable for proc0 */ + __IOM uint32_t PROC0_INTE1; /*!< Interrupt Enable for proc0 */ + __IOM uint32_t PROC0_INTE2; /*!< Interrupt Enable for proc0 */ + __IOM uint32_t PROC0_INTE3; /*!< Interrupt Enable for proc0 */ + __IOM uint32_t PROC0_INTF0; /*!< Interrupt Force for proc0 */ + __IOM uint32_t PROC0_INTF1; /*!< Interrupt Force for proc0 */ + __IOM uint32_t PROC0_INTF2; /*!< Interrupt Force for proc0 */ + __IOM uint32_t PROC0_INTF3; /*!< Interrupt Force for proc0 */ + __IOM uint32_t PROC0_INTS0; /*!< Interrupt status after masking & forcing for proc0 */ + __IOM uint32_t PROC0_INTS1; /*!< Interrupt status after masking & forcing for proc0 */ + __IOM uint32_t PROC0_INTS2; /*!< Interrupt status after masking & forcing for proc0 */ + __IOM uint32_t PROC0_INTS3; /*!< Interrupt status after masking & forcing for proc0 */ + __IOM uint32_t PROC1_INTE0; /*!< Interrupt Enable for proc1 */ + __IOM uint32_t PROC1_INTE1; /*!< Interrupt Enable for proc1 */ + __IOM uint32_t PROC1_INTE2; /*!< Interrupt Enable for proc1 */ + __IOM uint32_t PROC1_INTE3; /*!< Interrupt Enable for proc1 */ + __IOM uint32_t PROC1_INTF0; /*!< Interrupt Force for proc1 */ + __IOM uint32_t PROC1_INTF1; /*!< Interrupt Force for proc1 */ + __IOM uint32_t PROC1_INTF2; /*!< Interrupt Force for proc1 */ + __IOM uint32_t PROC1_INTF3; /*!< Interrupt Force for proc1 */ + __IOM uint32_t PROC1_INTS0; /*!< Interrupt status after masking & forcing for proc1 */ + __IOM uint32_t PROC1_INTS1; /*!< Interrupt status after masking & forcing for proc1 */ + __IOM uint32_t PROC1_INTS2; /*!< Interrupt status after masking & forcing for proc1 */ + __IOM uint32_t PROC1_INTS3; /*!< Interrupt status after masking & forcing for proc1 */ + __IOM uint32_t DORMANT_WAKE_INTE0; /*!< Interrupt Enable for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTE1; /*!< Interrupt Enable for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTE2; /*!< Interrupt Enable for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTE3; /*!< Interrupt Enable for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTF0; /*!< Interrupt Force for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTF1; /*!< Interrupt Force for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTF2; /*!< Interrupt Force for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTF3; /*!< Interrupt Force for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTS0; /*!< Interrupt status after masking & forcing for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTS1; /*!< Interrupt status after masking & forcing for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTS2; /*!< Interrupt status after masking & forcing for dormant_wake */ + __IOM uint32_t DORMANT_WAKE_INTS3; /*!< Interrupt status after masking & forcing for dormant_wake */ +} IO_BANK0_Type; /*!< Size = 400 (0x190) */ + + + +/* =========================================================================================================================== */ +/* ================ SYSINFO ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief SYSINFO (SYSINFO) + */ + +typedef struct { /*!< SYSINFO Structure */ + __IOM uint32_t CHIP_ID; /*!< JEDEC JEP-106 compliant chip identifier. */ + __IOM uint32_t PLATFORM; /*!< Platform register. Allows software to know what environment + it is running in. */ + __IM uint32_t RESERVED[2]; + __IOM uint32_t GITREF_RP2040; /*!< Git hash of the chip source. Used to identify chip version. */ +} SYSINFO_Type; /*!< Size = 20 (0x14) */ + + + +/* =========================================================================================================================== */ +/* ================ PPB ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief PPB (PPB) + */ + +typedef struct { /*!< PPB Structure */ + __IM uint32_t RESERVED[14340]; + __IOM uint32_t SYST_CSR; /*!< Use the SysTick Control and Status Register to enable the SysTick + features. */ + __IOM uint32_t SYST_RVR; /*!< Use the SysTick Reload Value Register to specify the start value + to load into the current value register when the counter + reaches 0. It can be any value between 0 and 0x00FFFFFF. + A start value of 0 is possible, but has no effect because + the SysTick interrupt and COUNTFLAG are activated when + counting from 1 to 0. The reset value of this register + is UNKNOWN. To generate a multi-shot timer with a period + of N processor clock cycles, use a RELOAD value of N-1. + For example, if the SysTick interrupt is required every + 100 clock pulses, set RELOAD to 99. */ + __IOM uint32_t SYST_CVR; /*!< Use the SysTick Current Value Register to find the current value + in the register. The reset value of this register is UNKNOWN. */ + __IOM uint32_t SYST_CALIB; /*!< Use the SysTick Calibration Value Register to enable software + to scale to any required speed using divide and multiply. */ + __IM uint32_t RESERVED1[56]; + __IOM uint32_t NVIC_ISER; /*!< Use the Interrupt Set-Enable Register to enable interrupts and + determine which interrupts are currently enabled. If a + pending interrupt is enabled, the NVIC activates the interrupt + based on its priority. If an interrupt is not enabled, + asserting its interrupt signal changes the interrupt state + to pending, but the NVIC never activates the interrupt, + regardless of its priority. */ + __IM uint32_t RESERVED2[31]; + __IOM uint32_t NVIC_ICER; /*!< Use the Interrupt Clear-Enable Registers to disable interrupts + and determine which interrupts are currently enabled. */ + __IM uint32_t RESERVED3[31]; + __IOM uint32_t NVIC_ISPR; /*!< The NVIC_ISPR forces interrupts into the pending state, and + shows which interrupts are pending. */ + __IM uint32_t RESERVED4[31]; + __IOM uint32_t NVIC_ICPR; /*!< Use the Interrupt Clear-Pending Register to clear pending interrupts + and determine which interrupts are currently pending. */ + __IM uint32_t RESERVED5[95]; + __IOM uint32_t NVIC_IPR0; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. Note: Writing 1 to an NVIC_ICPR + bit does not affect the active state of the corresponding + interrupt. These registers are only word-accessible */ + __IOM uint32_t NVIC_IPR1; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR2; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR3; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR4; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR5; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR6; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IOM uint32_t NVIC_IPR7; /*!< Use the Interrupt Priority Registers to assign a priority from + 0 to 3 to each of the available interrupts. 0 is the highest + priority, and 3 is the lowest. */ + __IM uint32_t RESERVED6[568]; + __IOM uint32_t CPUID; /*!< Read the CPU ID Base Register to determine: the ID number of + the processor core, the version number of the processor + core, the implementation details of the processor core. */ + __IOM uint32_t ICSR; /*!< Use the Interrupt Control State Register to set a pending Non-Maskable + Interrupt (NMI), set or clear a pending PendSV, set or + clear a pending SysTick, check for pending exceptions, + check the vector number of the highest priority pended + exception, check the vector number of the active exception. */ + __IOM uint32_t VTOR; /*!< The VTOR holds the vector table offset address. */ + __IOM uint32_t AIRCR; /*!< Use the Application Interrupt and Reset Control Register to: + determine data endianness, clear all active state information + from debug halt mode, request a system reset. */ + __IOM uint32_t SCR; /*!< System Control Register. Use the System Control Register for + power-management functions: signal to the system when the + processor can enter a low power state, control how the + processor enters and exits low power states. */ + __IOM uint32_t CCR; /*!< The Configuration and Control Register permanently enables stack + alignment and causes unaligned accesses to result in a + Hard Fault. */ + __IM uint32_t RESERVED7; + __IOM uint32_t SHPR2; /*!< System handlers are a special class of exception handler that + can have their priority set to any of the priority levels. + Use the System Handler Priority Register 2 to set the priority + of SVCall. */ + __IOM uint32_t SHPR3; /*!< System handlers are a special class of exception handler that + can have their priority set to any of the priority levels. + Use the System Handler Priority Register 3 to set the priority + of PendSV and SysTick. */ + __IOM uint32_t SHCSR; /*!< Use the System Handler Control and State Register to determine + or clear the pending status of SVCall. */ + __IM uint32_t RESERVED8[26]; + __IOM uint32_t MPU_TYPE; /*!< Read the MPU Type Register to determine if the processor implements + an MPU, and how many regions the MPU supports. */ + __IOM uint32_t MPU_CTRL; /*!< Use the MPU Control Register to enable and disable the MPU, + and to control whether the default memory map is enabled + as a background region for privileged accesses, and whether + the MPU is enabled for HardFaults and NMIs. */ + __IOM uint32_t MPU_RNR; /*!< Use the MPU Region Number Register to select the region currently + accessed by MPU_RBAR and MPU_RASR. */ + __IOM uint32_t MPU_RBAR; /*!< Read the MPU Region Base Address Register to determine the base + address of the region identified by MPU_RNR. Write to update + the base address of said region or that of a specified + region, with whose number MPU_RNR will also be updated. */ + __IOM uint32_t MPU_RASR; /*!< Use the MPU Region Attribute and Size Register to define the + size, access behaviour and memory type of the region identified + by MPU_RNR, and enable that region. */ +} PPB_Type; /*!< Size = 60836 (0xeda4) */ + + + +/* =========================================================================================================================== */ +/* ================ SSI ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief DW_apb_ssi has the following features: + * APB interface – Allows for easy integration into a DesignWare Synthesizable Components for AMBA 2 implementation. + * APB3 and APB4 protocol support. + * Scalable APB data bus width – Supports APB data bus widths of 8, 16, and 32 bits. + * Serial-master or serial-slave operation – Enables serial communication with serial-master or serial-slave peripheral devices. + * Programmable Dual/Quad/Octal SPI support in Master Mode. + * Dual Data Rate (DDR) and Read Data Strobe (RDS) Support - Enables the DW_apb_ssi master to perform operations with the device in DDR and RDS modes when working in Dual/Quad/Octal mode of operation. + * Data Mask Support - Enables the DW_apb_ssi to selectively update the bytes in the device. This feature is applicable only in enhanced SPI modes. + * eXecute-In-Place (XIP) support - Enables the DW_apb_ssi master to behave as a memory mapped I/O and fetches the data from the device based on the APB read request. This feature is applicable only in enhanced SPI modes. + * DMA Controller Interface – Enables the DW_apb_ssi to interface to a DMA controller over the bus using a handshaking interface for transfer requests. + * Independent masking of interrupts – Master collision, transmit FIFO overflow, transmit FIFO empty, receive FIFO full, receive FIFO underflow, and receive FIFO overflow interrupts can all be masked independently. + * Multi-master contention detection – Informs the processor of multiple serial-master accesses on the serial bus. + * Bypass of meta-stability flip-flops for synchronous clocks – When the APB clock (pclk) and the DW_apb_ssi serial clock (ssi_clk) are synchronous, meta-stable flip-flops are not used when transferring control signals across these clock domains. + * Programmable delay on the sample time of the received serial data bit (rxd); enables programmable control of routing delays resulting in higher serial data-bit rates. + * Programmable features: + - Serial interface operation – Choice of Motorola SPI, Texas Instruments Synchronous Serial Protocol or National Semiconductor Microwire. + - Clock bit-rate – Dynamic control of the serial bit rate of the data transfer; used in only serial-master mode of operation. + - Data Item size (4 to 32 bits) – Item size of each data transfer under the control of the programmer. + * Configured features: + - FIFO depth – 16 words deep. The FIFO width is fixed at 32 bits. + - 1 slave select output. + - Hardware slave-select – Dedicated hardware slave-select line. + - Combined interrupt line - one combined interrupt line from the DW_apb_ssi to the interrupt controller. + - Interrupt polarity – active high interrupt lines. + - Serial clock polarity – low serial-clock polarity directly after reset. + - Serial clock phase – capture on first edge of serial-clock directly after reset. (SSI) + */ + +typedef struct { /*!< SSI Structure */ + __IOM uint32_t CTRLR0; /*!< Control register 0 */ + __IOM uint32_t CTRLR1; /*!< Master Control register 1 */ + __IOM uint32_t SSIENR; /*!< SSI Enable */ + __IOM uint32_t MWCR; /*!< Microwire Control */ + __IOM uint32_t SER; /*!< Slave enable */ + __IOM uint32_t BAUDR; /*!< Baud rate */ + __IOM uint32_t TXFTLR; /*!< TX FIFO threshold level */ + __IOM uint32_t RXFTLR; /*!< RX FIFO threshold level */ + __IOM uint32_t TXFLR; /*!< TX FIFO level */ + __IOM uint32_t RXFLR; /*!< RX FIFO level */ + __IOM uint32_t SR; /*!< Status register */ + __IOM uint32_t IMR; /*!< Interrupt mask */ + __IOM uint32_t ISR; /*!< Interrupt status */ + __IOM uint32_t RISR; /*!< Raw interrupt status */ + __IOM uint32_t TXOICR; /*!< TX FIFO overflow interrupt clear */ + __IOM uint32_t RXOICR; /*!< RX FIFO overflow interrupt clear */ + __IOM uint32_t RXUICR; /*!< RX FIFO underflow interrupt clear */ + __IOM uint32_t MSTICR; /*!< Multi-master interrupt clear */ + __IOM uint32_t ICR; /*!< Interrupt clear */ + __IOM uint32_t DMACR; /*!< DMA control */ + __IOM uint32_t DMATDLR; /*!< DMA TX data level */ + __IOM uint32_t DMARDLR; /*!< DMA RX data level */ + __IOM uint32_t IDR; /*!< Identification register */ + __IOM uint32_t SSI_VERSION_ID; /*!< Version ID */ + __IOM uint32_t DR0; /*!< Data Register 0 (of 36) */ + __IM uint32_t RESERVED[35]; + __IOM uint32_t RX_SAMPLE_DLY; /*!< RX sample delay */ + __IOM uint32_t SPI_CTRLR0; /*!< SPI control */ + __IOM uint32_t TXD_DRIVE_EDGE; /*!< TX drive edge */ +} SSI_Type; /*!< Size = 252 (0xfc) */ + + + +/* =========================================================================================================================== */ +/* ================ XIP_CTRL ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief QSPI flash execute-in-place block (XIP_CTRL) + */ + +typedef struct { /*!< XIP_CTRL Structure */ + __IOM uint32_t CTRL; /*!< Cache control */ + __IOM uint32_t FLUSH; /*!< Cache Flush control */ + __IOM uint32_t STAT; /*!< Cache Status */ + __IOM uint32_t CTR_HIT; /*!< Cache Hit counter */ + __IOM uint32_t CTR_ACC; /*!< Cache Access counter */ + __IOM uint32_t STREAM_ADDR; /*!< FIFO stream address */ + __IOM uint32_t STREAM_CTR; /*!< FIFO stream control */ + __IOM uint32_t STREAM_FIFO; /*!< FIFO stream data */ +} XIP_CTRL_Type; /*!< Size = 32 (0x20) */ + + + +/* =========================================================================================================================== */ +/* ================ SYSCFG ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Register block for various chip control signals (SYSCFG) + */ + +typedef struct { /*!< SYSCFG Structure */ + __IOM uint32_t PROC0_NMI_MASK; /*!< Processor core 0 NMI source mask */ + __IOM uint32_t PROC1_NMI_MASK; /*!< Processor core 1 NMI source mask */ + __IOM uint32_t PROC_CONFIG; /*!< Configuration for processors */ + __IOM uint32_t PROC_IN_SYNC_BYPASS; /*!< For each bit, if 1, bypass the input synchronizer between that + GPIO and the GPIO input register in the SIO. The input + synchronizers should generally be unbypassed, to avoid + injecting metastabilities into processors. If you're feeling + brave, you can bypass to save two cycles of input latency. + This register applies to GPIO 0...29. */ + __IOM uint32_t PROC_IN_SYNC_BYPASS_HI; /*!< For each bit, if 1, bypass the input synchronizer between that + GPIO and the GPIO input register in the SIO. The input + synchronizers should generally be unbypassed, to avoid + injecting metastabilities into processors. If you're feeling + brave, you can bypass to save two cycles of input latency. + This register applies to GPIO 30...35 (the QSPI IOs). */ + __IOM uint32_t DBGFORCE; /*!< Directly control the SWD debug port of either processor */ + __IOM uint32_t MEMPOWERDOWN; /*!< Control power downs to memories. Set high to power down memories. + Use with extreme caution */ +} SYSCFG_Type; /*!< Size = 28 (0x1c) */ + + + +/* =========================================================================================================================== */ +/* ================ XOSC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Controls the crystal oscillator (XOSC) + */ + +typedef struct { /*!< XOSC Structure */ + __IOM uint32_t CTRL; /*!< Crystal Oscillator Control */ + __IOM uint32_t STATUS; /*!< Crystal Oscillator Status */ + __IOM uint32_t DORMANT; /*!< Crystal Oscillator pause control */ + __IOM uint32_t STARTUP; /*!< Controls the startup delay */ + __IM uint32_t RESERVED[3]; + __IOM uint32_t COUNT; /*!< A down counter running at the xosc frequency which counts to + zero and stops. To start the counter write a non-zero value. + Can be used for short software pauses when setting up time + sensitive hardware. */ +} XOSC_Type; /*!< Size = 32 (0x20) */ + + + +/* =========================================================================================================================== */ +/* ================ PLL_SYS ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief PLL_SYS (PLL_SYS) + */ + +typedef struct { /*!< PLL_SYS Structure */ + __IOM uint32_t CS; /*!< Control and Status GENERAL CONSTRAINTS: Reference clock frequency + min=5MHz, max=800MHz Feedback divider min=16, max=320 VCO + frequency min=750MHz, max=1600MHz */ + __IOM uint32_t PWR; /*!< Controls the PLL power modes. */ + __IOM uint32_t FBDIV_INT; /*!< Feedback divisor (note: this PLL does not support fractional + division) */ + __IOM uint32_t PRIM; /*!< Controls the PLL post dividers for the primary output (note: + this PLL does not have a secondary output) the primary + output is driven from VCO divided by postdiv1*postdiv2 */ +} PLL_SYS_Type; /*!< Size = 16 (0x10) */ + + + +/* =========================================================================================================================== */ +/* ================ UART0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief UART0 (UART0) + */ + +typedef struct { /*!< UART0 Structure */ + __IOM uint32_t UARTDR; /*!< Data Register, UARTDR */ + __IOM uint32_t UARTRSR; /*!< Receive Status Register/Error Clear Register, UARTRSR/UARTECR */ + __IM uint32_t RESERVED[4]; + __IOM uint32_t UARTFR; /*!< Flag Register, UARTFR */ + __IM uint32_t RESERVED1; + __IOM uint32_t UARTILPR; /*!< IrDA Low-Power Counter Register, UARTILPR */ + __IOM uint32_t UARTIBRD; /*!< Integer Baud Rate Register, UARTIBRD */ + __IOM uint32_t UARTFBRD; /*!< Fractional Baud Rate Register, UARTFBRD */ + __IOM uint32_t UARTLCR_H; /*!< Line Control Register, UARTLCR_H */ + __IOM uint32_t UARTCR; /*!< Control Register, UARTCR */ + __IOM uint32_t UARTIFLS; /*!< Interrupt FIFO Level Select Register, UARTIFLS */ + __IOM uint32_t UARTIMSC; /*!< Interrupt Mask Set/Clear Register, UARTIMSC */ + __IOM uint32_t UARTRIS; /*!< Raw Interrupt Status Register, UARTRIS */ + __IOM uint32_t UARTMIS; /*!< Masked Interrupt Status Register, UARTMIS */ + __IOM uint32_t UARTICR; /*!< Interrupt Clear Register, UARTICR */ + __IOM uint32_t UARTDMACR; /*!< DMA Control Register, UARTDMACR */ + __IM uint32_t RESERVED2[997]; + __IOM uint32_t UARTPERIPHID0; /*!< UARTPeriphID0 Register */ + __IOM uint32_t UARTPERIPHID1; /*!< UARTPeriphID1 Register */ + __IOM uint32_t UARTPERIPHID2; /*!< UARTPeriphID2 Register */ + __IOM uint32_t UARTPERIPHID3; /*!< UARTPeriphID3 Register */ + __IOM uint32_t UARTPCELLID0; /*!< UARTPCellID0 Register */ + __IOM uint32_t UARTPCELLID1; /*!< UARTPCellID1 Register */ + __IOM uint32_t UARTPCELLID2; /*!< UARTPCellID2 Register */ + __IOM uint32_t UARTPCELLID3; /*!< UARTPCellID3 Register */ +} UART0_Type; /*!< Size = 4096 (0x1000) */ + + + +/* =========================================================================================================================== */ +/* ================ ROSC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief ROSC (ROSC) + */ + +typedef struct { /*!< ROSC Structure */ + __IOM uint32_t CTRL; /*!< Ring Oscillator control */ + __IOM uint32_t FREQA; /*!< The FREQA & FREQB registers control the frequency by controlling + the drive strength of each stage The drive strength has + 4 levels determined by the number of bits set Increasing + the number of bits set increases the drive strength and + increases the oscillation frequency 0 bits set is the default + drive strength 1 bit set doubles the drive strength 2 bits + set triples drive strength 3 bits set quadruples drive + strength */ + __IOM uint32_t FREQB; /*!< For a detailed description see freqa register */ + __IOM uint32_t DORMANT; /*!< Ring Oscillator pause control */ + __IOM uint32_t DIV; /*!< Controls the output divider */ + __IOM uint32_t PHASE; /*!< Controls the phase shifted output */ + __IOM uint32_t STATUS; /*!< Ring Oscillator Status */ + __IOM uint32_t RANDOMBIT; /*!< This just reads the state of the oscillator output so randomness + is compromised if the ring oscillator is stopped or run + at a harmonic of the bus frequency */ + __IOM uint32_t COUNT; /*!< A down counter running at the ROSC frequency which counts to + zero and stops. To start the counter write a non-zero value. + Can be used for short software pauses when setting up time + sensitive hardware. */ +} ROSC_Type; /*!< Size = 36 (0x24) */ + + + +/* =========================================================================================================================== */ +/* ================ WATCHDOG ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief WATCHDOG (WATCHDOG) + */ + +typedef struct { /*!< WATCHDOG Structure */ + __IOM uint32_t CTRL; /*!< Watchdog control The rst_wdsel register determines which subsystems + are reset when the watchdog is triggered. The watchdog + can be triggered in software. */ + __IOM uint32_t LOAD; /*!< Load the watchdog timer. The maximum setting is 0xffffff which + corresponds to 0xffffff / 2 ticks before triggering a watchdog + reset (see errata RP2040-E1). */ + __IOM uint32_t REASON; /*!< Logs the reason for the last reset. Both bits are zero for the + case of a hardware reset. */ + __IOM uint32_t SCRATCH0; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH1; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH2; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH3; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH4; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH5; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH6; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t SCRATCH7; /*!< Scratch register. Information persists through soft reset of + the chip. */ + __IOM uint32_t TICK; /*!< Controls the tick generator */ +} WATCHDOG_Type; /*!< Size = 48 (0x30) */ + + + +/* =========================================================================================================================== */ +/* ================ DMA ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief DMA with separate read and write masters (DMA) + */ + +typedef struct { /*!< DMA Structure */ + __IOM uint32_t CH0_READ_ADDR; /*!< DMA Channel 0 Read Address pointer */ + __IOM uint32_t CH0_WRITE_ADDR; /*!< DMA Channel 0 Write Address pointer */ + __IOM uint32_t CH0_TRANS_COUNT; /*!< DMA Channel 0 Transfer Count */ + __IOM uint32_t CH0_CTRL_TRIG; /*!< DMA Channel 0 Control and Status */ + __IOM uint32_t CH0_AL1_CTRL; /*!< Alias for channel 0 CTRL register */ + __IOM uint32_t CH0_AL1_READ_ADDR; /*!< Alias for channel 0 READ_ADDR register */ + __IOM uint32_t CH0_AL1_WRITE_ADDR; /*!< Alias for channel 0 WRITE_ADDR register */ + __IOM uint32_t CH0_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 0 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH0_AL2_CTRL; /*!< Alias for channel 0 CTRL register */ + __IOM uint32_t CH0_AL2_TRANS_COUNT; /*!< Alias for channel 0 TRANS_COUNT register */ + __IOM uint32_t CH0_AL2_READ_ADDR; /*!< Alias for channel 0 READ_ADDR register */ + __IOM uint32_t CH0_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 0 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH0_AL3_CTRL; /*!< Alias for channel 0 CTRL register */ + __IOM uint32_t CH0_AL3_WRITE_ADDR; /*!< Alias for channel 0 WRITE_ADDR register */ + __IOM uint32_t CH0_AL3_TRANS_COUNT; /*!< Alias for channel 0 TRANS_COUNT register */ + __IOM uint32_t CH0_AL3_READ_ADDR_TRIG; /*!< Alias for channel 0 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH1_READ_ADDR; /*!< DMA Channel 1 Read Address pointer */ + __IOM uint32_t CH1_WRITE_ADDR; /*!< DMA Channel 1 Write Address pointer */ + __IOM uint32_t CH1_TRANS_COUNT; /*!< DMA Channel 1 Transfer Count */ + __IOM uint32_t CH1_CTRL_TRIG; /*!< DMA Channel 1 Control and Status */ + __IOM uint32_t CH1_AL1_CTRL; /*!< Alias for channel 1 CTRL register */ + __IOM uint32_t CH1_AL1_READ_ADDR; /*!< Alias for channel 1 READ_ADDR register */ + __IOM uint32_t CH1_AL1_WRITE_ADDR; /*!< Alias for channel 1 WRITE_ADDR register */ + __IOM uint32_t CH1_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 1 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH1_AL2_CTRL; /*!< Alias for channel 1 CTRL register */ + __IOM uint32_t CH1_AL2_TRANS_COUNT; /*!< Alias for channel 1 TRANS_COUNT register */ + __IOM uint32_t CH1_AL2_READ_ADDR; /*!< Alias for channel 1 READ_ADDR register */ + __IOM uint32_t CH1_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 1 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH1_AL3_CTRL; /*!< Alias for channel 1 CTRL register */ + __IOM uint32_t CH1_AL3_WRITE_ADDR; /*!< Alias for channel 1 WRITE_ADDR register */ + __IOM uint32_t CH1_AL3_TRANS_COUNT; /*!< Alias for channel 1 TRANS_COUNT register */ + __IOM uint32_t CH1_AL3_READ_ADDR_TRIG; /*!< Alias for channel 1 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH2_READ_ADDR; /*!< DMA Channel 2 Read Address pointer */ + __IOM uint32_t CH2_WRITE_ADDR; /*!< DMA Channel 2 Write Address pointer */ + __IOM uint32_t CH2_TRANS_COUNT; /*!< DMA Channel 2 Transfer Count */ + __IOM uint32_t CH2_CTRL_TRIG; /*!< DMA Channel 2 Control and Status */ + __IOM uint32_t CH2_AL1_CTRL; /*!< Alias for channel 2 CTRL register */ + __IOM uint32_t CH2_AL1_READ_ADDR; /*!< Alias for channel 2 READ_ADDR register */ + __IOM uint32_t CH2_AL1_WRITE_ADDR; /*!< Alias for channel 2 WRITE_ADDR register */ + __IOM uint32_t CH2_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 2 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH2_AL2_CTRL; /*!< Alias for channel 2 CTRL register */ + __IOM uint32_t CH2_AL2_TRANS_COUNT; /*!< Alias for channel 2 TRANS_COUNT register */ + __IOM uint32_t CH2_AL2_READ_ADDR; /*!< Alias for channel 2 READ_ADDR register */ + __IOM uint32_t CH2_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 2 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH2_AL3_CTRL; /*!< Alias for channel 2 CTRL register */ + __IOM uint32_t CH2_AL3_WRITE_ADDR; /*!< Alias for channel 2 WRITE_ADDR register */ + __IOM uint32_t CH2_AL3_TRANS_COUNT; /*!< Alias for channel 2 TRANS_COUNT register */ + __IOM uint32_t CH2_AL3_READ_ADDR_TRIG; /*!< Alias for channel 2 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH3_READ_ADDR; /*!< DMA Channel 3 Read Address pointer */ + __IOM uint32_t CH3_WRITE_ADDR; /*!< DMA Channel 3 Write Address pointer */ + __IOM uint32_t CH3_TRANS_COUNT; /*!< DMA Channel 3 Transfer Count */ + __IOM uint32_t CH3_CTRL_TRIG; /*!< DMA Channel 3 Control and Status */ + __IOM uint32_t CH3_AL1_CTRL; /*!< Alias for channel 3 CTRL register */ + __IOM uint32_t CH3_AL1_READ_ADDR; /*!< Alias for channel 3 READ_ADDR register */ + __IOM uint32_t CH3_AL1_WRITE_ADDR; /*!< Alias for channel 3 WRITE_ADDR register */ + __IOM uint32_t CH3_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 3 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH3_AL2_CTRL; /*!< Alias for channel 3 CTRL register */ + __IOM uint32_t CH3_AL2_TRANS_COUNT; /*!< Alias for channel 3 TRANS_COUNT register */ + __IOM uint32_t CH3_AL2_READ_ADDR; /*!< Alias for channel 3 READ_ADDR register */ + __IOM uint32_t CH3_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 3 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH3_AL3_CTRL; /*!< Alias for channel 3 CTRL register */ + __IOM uint32_t CH3_AL3_WRITE_ADDR; /*!< Alias for channel 3 WRITE_ADDR register */ + __IOM uint32_t CH3_AL3_TRANS_COUNT; /*!< Alias for channel 3 TRANS_COUNT register */ + __IOM uint32_t CH3_AL3_READ_ADDR_TRIG; /*!< Alias for channel 3 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH4_READ_ADDR; /*!< DMA Channel 4 Read Address pointer */ + __IOM uint32_t CH4_WRITE_ADDR; /*!< DMA Channel 4 Write Address pointer */ + __IOM uint32_t CH4_TRANS_COUNT; /*!< DMA Channel 4 Transfer Count */ + __IOM uint32_t CH4_CTRL_TRIG; /*!< DMA Channel 4 Control and Status */ + __IOM uint32_t CH4_AL1_CTRL; /*!< Alias for channel 4 CTRL register */ + __IOM uint32_t CH4_AL1_READ_ADDR; /*!< Alias for channel 4 READ_ADDR register */ + __IOM uint32_t CH4_AL1_WRITE_ADDR; /*!< Alias for channel 4 WRITE_ADDR register */ + __IOM uint32_t CH4_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 4 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH4_AL2_CTRL; /*!< Alias for channel 4 CTRL register */ + __IOM uint32_t CH4_AL2_TRANS_COUNT; /*!< Alias for channel 4 TRANS_COUNT register */ + __IOM uint32_t CH4_AL2_READ_ADDR; /*!< Alias for channel 4 READ_ADDR register */ + __IOM uint32_t CH4_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 4 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH4_AL3_CTRL; /*!< Alias for channel 4 CTRL register */ + __IOM uint32_t CH4_AL3_WRITE_ADDR; /*!< Alias for channel 4 WRITE_ADDR register */ + __IOM uint32_t CH4_AL3_TRANS_COUNT; /*!< Alias for channel 4 TRANS_COUNT register */ + __IOM uint32_t CH4_AL3_READ_ADDR_TRIG; /*!< Alias for channel 4 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH5_READ_ADDR; /*!< DMA Channel 5 Read Address pointer */ + __IOM uint32_t CH5_WRITE_ADDR; /*!< DMA Channel 5 Write Address pointer */ + __IOM uint32_t CH5_TRANS_COUNT; /*!< DMA Channel 5 Transfer Count */ + __IOM uint32_t CH5_CTRL_TRIG; /*!< DMA Channel 5 Control and Status */ + __IOM uint32_t CH5_AL1_CTRL; /*!< Alias for channel 5 CTRL register */ + __IOM uint32_t CH5_AL1_READ_ADDR; /*!< Alias for channel 5 READ_ADDR register */ + __IOM uint32_t CH5_AL1_WRITE_ADDR; /*!< Alias for channel 5 WRITE_ADDR register */ + __IOM uint32_t CH5_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 5 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH5_AL2_CTRL; /*!< Alias for channel 5 CTRL register */ + __IOM uint32_t CH5_AL2_TRANS_COUNT; /*!< Alias for channel 5 TRANS_COUNT register */ + __IOM uint32_t CH5_AL2_READ_ADDR; /*!< Alias for channel 5 READ_ADDR register */ + __IOM uint32_t CH5_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 5 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH5_AL3_CTRL; /*!< Alias for channel 5 CTRL register */ + __IOM uint32_t CH5_AL3_WRITE_ADDR; /*!< Alias for channel 5 WRITE_ADDR register */ + __IOM uint32_t CH5_AL3_TRANS_COUNT; /*!< Alias for channel 5 TRANS_COUNT register */ + __IOM uint32_t CH5_AL3_READ_ADDR_TRIG; /*!< Alias for channel 5 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH6_READ_ADDR; /*!< DMA Channel 6 Read Address pointer */ + __IOM uint32_t CH6_WRITE_ADDR; /*!< DMA Channel 6 Write Address pointer */ + __IOM uint32_t CH6_TRANS_COUNT; /*!< DMA Channel 6 Transfer Count */ + __IOM uint32_t CH6_CTRL_TRIG; /*!< DMA Channel 6 Control and Status */ + __IOM uint32_t CH6_AL1_CTRL; /*!< Alias for channel 6 CTRL register */ + __IOM uint32_t CH6_AL1_READ_ADDR; /*!< Alias for channel 6 READ_ADDR register */ + __IOM uint32_t CH6_AL1_WRITE_ADDR; /*!< Alias for channel 6 WRITE_ADDR register */ + __IOM uint32_t CH6_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 6 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH6_AL2_CTRL; /*!< Alias for channel 6 CTRL register */ + __IOM uint32_t CH6_AL2_TRANS_COUNT; /*!< Alias for channel 6 TRANS_COUNT register */ + __IOM uint32_t CH6_AL2_READ_ADDR; /*!< Alias for channel 6 READ_ADDR register */ + __IOM uint32_t CH6_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 6 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH6_AL3_CTRL; /*!< Alias for channel 6 CTRL register */ + __IOM uint32_t CH6_AL3_WRITE_ADDR; /*!< Alias for channel 6 WRITE_ADDR register */ + __IOM uint32_t CH6_AL3_TRANS_COUNT; /*!< Alias for channel 6 TRANS_COUNT register */ + __IOM uint32_t CH6_AL3_READ_ADDR_TRIG; /*!< Alias for channel 6 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH7_READ_ADDR; /*!< DMA Channel 7 Read Address pointer */ + __IOM uint32_t CH7_WRITE_ADDR; /*!< DMA Channel 7 Write Address pointer */ + __IOM uint32_t CH7_TRANS_COUNT; /*!< DMA Channel 7 Transfer Count */ + __IOM uint32_t CH7_CTRL_TRIG; /*!< DMA Channel 7 Control and Status */ + __IOM uint32_t CH7_AL1_CTRL; /*!< Alias for channel 7 CTRL register */ + __IOM uint32_t CH7_AL1_READ_ADDR; /*!< Alias for channel 7 READ_ADDR register */ + __IOM uint32_t CH7_AL1_WRITE_ADDR; /*!< Alias for channel 7 WRITE_ADDR register */ + __IOM uint32_t CH7_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 7 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH7_AL2_CTRL; /*!< Alias for channel 7 CTRL register */ + __IOM uint32_t CH7_AL2_TRANS_COUNT; /*!< Alias for channel 7 TRANS_COUNT register */ + __IOM uint32_t CH7_AL2_READ_ADDR; /*!< Alias for channel 7 READ_ADDR register */ + __IOM uint32_t CH7_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 7 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH7_AL3_CTRL; /*!< Alias for channel 7 CTRL register */ + __IOM uint32_t CH7_AL3_WRITE_ADDR; /*!< Alias for channel 7 WRITE_ADDR register */ + __IOM uint32_t CH7_AL3_TRANS_COUNT; /*!< Alias for channel 7 TRANS_COUNT register */ + __IOM uint32_t CH7_AL3_READ_ADDR_TRIG; /*!< Alias for channel 7 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH8_READ_ADDR; /*!< DMA Channel 8 Read Address pointer */ + __IOM uint32_t CH8_WRITE_ADDR; /*!< DMA Channel 8 Write Address pointer */ + __IOM uint32_t CH8_TRANS_COUNT; /*!< DMA Channel 8 Transfer Count */ + __IOM uint32_t CH8_CTRL_TRIG; /*!< DMA Channel 8 Control and Status */ + __IOM uint32_t CH8_AL1_CTRL; /*!< Alias for channel 8 CTRL register */ + __IOM uint32_t CH8_AL1_READ_ADDR; /*!< Alias for channel 8 READ_ADDR register */ + __IOM uint32_t CH8_AL1_WRITE_ADDR; /*!< Alias for channel 8 WRITE_ADDR register */ + __IOM uint32_t CH8_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 8 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH8_AL2_CTRL; /*!< Alias for channel 8 CTRL register */ + __IOM uint32_t CH8_AL2_TRANS_COUNT; /*!< Alias for channel 8 TRANS_COUNT register */ + __IOM uint32_t CH8_AL2_READ_ADDR; /*!< Alias for channel 8 READ_ADDR register */ + __IOM uint32_t CH8_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 8 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH8_AL3_CTRL; /*!< Alias for channel 8 CTRL register */ + __IOM uint32_t CH8_AL3_WRITE_ADDR; /*!< Alias for channel 8 WRITE_ADDR register */ + __IOM uint32_t CH8_AL3_TRANS_COUNT; /*!< Alias for channel 8 TRANS_COUNT register */ + __IOM uint32_t CH8_AL3_READ_ADDR_TRIG; /*!< Alias for channel 8 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH9_READ_ADDR; /*!< DMA Channel 9 Read Address pointer */ + __IOM uint32_t CH9_WRITE_ADDR; /*!< DMA Channel 9 Write Address pointer */ + __IOM uint32_t CH9_TRANS_COUNT; /*!< DMA Channel 9 Transfer Count */ + __IOM uint32_t CH9_CTRL_TRIG; /*!< DMA Channel 9 Control and Status */ + __IOM uint32_t CH9_AL1_CTRL; /*!< Alias for channel 9 CTRL register */ + __IOM uint32_t CH9_AL1_READ_ADDR; /*!< Alias for channel 9 READ_ADDR register */ + __IOM uint32_t CH9_AL1_WRITE_ADDR; /*!< Alias for channel 9 WRITE_ADDR register */ + __IOM uint32_t CH9_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 9 TRANS_COUNT register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH9_AL2_CTRL; /*!< Alias for channel 9 CTRL register */ + __IOM uint32_t CH9_AL2_TRANS_COUNT; /*!< Alias for channel 9 TRANS_COUNT register */ + __IOM uint32_t CH9_AL2_READ_ADDR; /*!< Alias for channel 9 READ_ADDR register */ + __IOM uint32_t CH9_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 9 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH9_AL3_CTRL; /*!< Alias for channel 9 CTRL register */ + __IOM uint32_t CH9_AL3_WRITE_ADDR; /*!< Alias for channel 9 WRITE_ADDR register */ + __IOM uint32_t CH9_AL3_TRANS_COUNT; /*!< Alias for channel 9 TRANS_COUNT register */ + __IOM uint32_t CH9_AL3_READ_ADDR_TRIG; /*!< Alias for channel 9 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH10_READ_ADDR; /*!< DMA Channel 10 Read Address pointer */ + __IOM uint32_t CH10_WRITE_ADDR; /*!< DMA Channel 10 Write Address pointer */ + __IOM uint32_t CH10_TRANS_COUNT; /*!< DMA Channel 10 Transfer Count */ + __IOM uint32_t CH10_CTRL_TRIG; /*!< DMA Channel 10 Control and Status */ + __IOM uint32_t CH10_AL1_CTRL; /*!< Alias for channel 10 CTRL register */ + __IOM uint32_t CH10_AL1_READ_ADDR; /*!< Alias for channel 10 READ_ADDR register */ + __IOM uint32_t CH10_AL1_WRITE_ADDR; /*!< Alias for channel 10 WRITE_ADDR register */ + __IOM uint32_t CH10_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 10 TRANS_COUNT register This is a trigger + register (0xc). Writing a nonzero value will reload the + channel counter and start the channel. */ + __IOM uint32_t CH10_AL2_CTRL; /*!< Alias for channel 10 CTRL register */ + __IOM uint32_t CH10_AL2_TRANS_COUNT; /*!< Alias for channel 10 TRANS_COUNT register */ + __IOM uint32_t CH10_AL2_READ_ADDR; /*!< Alias for channel 10 READ_ADDR register */ + __IOM uint32_t CH10_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 10 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH10_AL3_CTRL; /*!< Alias for channel 10 CTRL register */ + __IOM uint32_t CH10_AL3_WRITE_ADDR; /*!< Alias for channel 10 WRITE_ADDR register */ + __IOM uint32_t CH10_AL3_TRANS_COUNT; /*!< Alias for channel 10 TRANS_COUNT register */ + __IOM uint32_t CH10_AL3_READ_ADDR_TRIG; /*!< Alias for channel 10 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH11_READ_ADDR; /*!< DMA Channel 11 Read Address pointer */ + __IOM uint32_t CH11_WRITE_ADDR; /*!< DMA Channel 11 Write Address pointer */ + __IOM uint32_t CH11_TRANS_COUNT; /*!< DMA Channel 11 Transfer Count */ + __IOM uint32_t CH11_CTRL_TRIG; /*!< DMA Channel 11 Control and Status */ + __IOM uint32_t CH11_AL1_CTRL; /*!< Alias for channel 11 CTRL register */ + __IOM uint32_t CH11_AL1_READ_ADDR; /*!< Alias for channel 11 READ_ADDR register */ + __IOM uint32_t CH11_AL1_WRITE_ADDR; /*!< Alias for channel 11 WRITE_ADDR register */ + __IOM uint32_t CH11_AL1_TRANS_COUNT_TRIG; /*!< Alias for channel 11 TRANS_COUNT register This is a trigger + register (0xc). Writing a nonzero value will reload the + channel counter and start the channel. */ + __IOM uint32_t CH11_AL2_CTRL; /*!< Alias for channel 11 CTRL register */ + __IOM uint32_t CH11_AL2_TRANS_COUNT; /*!< Alias for channel 11 TRANS_COUNT register */ + __IOM uint32_t CH11_AL2_READ_ADDR; /*!< Alias for channel 11 READ_ADDR register */ + __IOM uint32_t CH11_AL2_WRITE_ADDR_TRIG; /*!< Alias for channel 11 WRITE_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IOM uint32_t CH11_AL3_CTRL; /*!< Alias for channel 11 CTRL register */ + __IOM uint32_t CH11_AL3_WRITE_ADDR; /*!< Alias for channel 11 WRITE_ADDR register */ + __IOM uint32_t CH11_AL3_TRANS_COUNT; /*!< Alias for channel 11 TRANS_COUNT register */ + __IOM uint32_t CH11_AL3_READ_ADDR_TRIG; /*!< Alias for channel 11 READ_ADDR register This is a trigger register + (0xc). Writing a nonzero value will reload the channel + counter and start the channel. */ + __IM uint32_t RESERVED[64]; + __IOM uint32_t INTR; /*!< Interrupt Status (raw) */ + __IOM uint32_t INTE0; /*!< Interrupt Enables for IRQ 0 */ + __IOM uint32_t INTF0; /*!< Force Interrupts */ + __IOM uint32_t INTS0; /*!< Interrupt Status for IRQ 0 */ + __IOM uint32_t INTR1; /*!< Interrupt Status (raw) */ + __IOM uint32_t INTE1; /*!< Interrupt Enables for IRQ 1 */ + __IOM uint32_t INTF1; /*!< Force Interrupts for IRQ 1 */ + __IOM uint32_t INTS1; /*!< Interrupt Status (masked) for IRQ 1 */ + __IOM uint32_t TIMER0; /*!< Pacing (X/Y) Fractional Timer The pacing timer produces TREQ + assertions at a rate set by ((X/Y) * sys_clk). This equation + is evaluated every sys_clk cycles and therefore can only + generate TREQs at a rate of 1 per sys_clk (i.e. permanent + TREQ) or less. */ + __IOM uint32_t TIMER1; /*!< Pacing (X/Y) Fractional Timer The pacing timer produces TREQ + assertions at a rate set by ((X/Y) * sys_clk). This equation + is evaluated every sys_clk cycles and therefore can only + generate TREQs at a rate of 1 per sys_clk (i.e. permanent + TREQ) or less. */ + __IOM uint32_t TIMER2; /*!< Pacing (X/Y) Fractional Timer The pacing timer produces TREQ + assertions at a rate set by ((X/Y) * sys_clk). This equation + is evaluated every sys_clk cycles and therefore can only + generate TREQs at a rate of 1 per sys_clk (i.e. permanent + TREQ) or less. */ + __IOM uint32_t TIMER3; /*!< Pacing (X/Y) Fractional Timer The pacing timer produces TREQ + assertions at a rate set by ((X/Y) * sys_clk). This equation + is evaluated every sys_clk cycles and therefore can only + generate TREQs at a rate of 1 per sys_clk (i.e. permanent + TREQ) or less. */ + __IOM uint32_t MULTI_CHAN_TRIGGER; /*!< Trigger one or more channels simultaneously */ + __IOM uint32_t SNIFF_CTRL; /*!< Sniffer Control */ + __IOM uint32_t SNIFF_DATA; /*!< Data accumulator for sniff hardware */ + __IM uint32_t RESERVED1; + __IOM uint32_t FIFO_LEVELS; /*!< Debug RAF, WAF, TDF levels */ + __IOM uint32_t CHAN_ABORT; /*!< Abort an in-progress transfer sequence on one or more channels */ + __IOM uint32_t N_CHANNELS; /*!< The number of channels this DMA instance is equipped with. This + DMA supports up to 16 hardware channels, but can be configured + with as few as one, to minimise silicon area. */ + __IM uint32_t RESERVED2[237]; + __IOM uint32_t CH0_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH0_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED3[14]; + __IOM uint32_t CH1_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH1_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED4[14]; + __IOM uint32_t CH2_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH2_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED5[14]; + __IOM uint32_t CH3_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH3_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED6[14]; + __IOM uint32_t CH4_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH4_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED7[14]; + __IOM uint32_t CH5_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH5_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED8[14]; + __IOM uint32_t CH6_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH6_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED9[14]; + __IOM uint32_t CH7_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH7_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED10[14]; + __IOM uint32_t CH8_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH8_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED11[14]; + __IOM uint32_t CH9_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH9_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED12[14]; + __IOM uint32_t CH10_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH10_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ + __IM uint32_t RESERVED13[14]; + __IOM uint32_t CH11_DBG_CTDREQ; /*!< Read: get channel DREQ counter (i.e. how many accesses the DMA + expects it can perform on the peripheral without overflow/underflow. + Write any value: clears the counter, and cause channel + to re-initiate DREQ handshake. */ + __IOM uint32_t CH11_DBG_TCR; /*!< Read to get channel TRANS_COUNT reload value, i.e. the length + of the next transfer */ +} DMA_Type; /*!< Size = 2760 (0xac8) */ + + + +/* =========================================================================================================================== */ +/* ================ TIMER ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Controls time and alarms + time is a 64 bit value indicating the time in usec since power-on + timeh is the top 32 bits of time & timel is the bottom 32 bits + to change time write to timelw before timehw + to read time read from timelr before timehr + An alarm is set by setting alarm_enable and writing to the corresponding alarm register + When an alarm is pending, the corresponding alarm_running signal will be high + An alarm can be cancelled before it has finished by clearing the alarm_enable + When an alarm fires, the corresponding alarm_irq is set and alarm_running is cleared + To clear the interrupt write a 1 to the corresponding alarm_irq (TIMER) + */ + +typedef struct { /*!< TIMER Structure */ + __IOM uint32_t TIMEHW; /*!< Write to bits 63:32 of time always write timelw before timehw */ + __IOM uint32_t TIMELW; /*!< Write to bits 31:0 of time writes do not get copied to time + until timehw is written */ + __IOM uint32_t TIMEHR; /*!< Read from bits 63:32 of time always read timelr before timehr */ + __IOM uint32_t TIMELR; /*!< Read from bits 31:0 of time */ + __IOM uint32_t ALARM0; /*!< Arm alarm 0, and configure the time it will fire. Once armed, + the alarm fires when TIMER_ALARM0 == TIMELR. The alarm + will disarm itself once it fires, and can be disarmed early + using the ARMED status register. */ + __IOM uint32_t ALARM1; /*!< Arm alarm 1, and configure the time it will fire. Once armed, + the alarm fires when TIMER_ALARM1 == TIMELR. The alarm + will disarm itself once it fires, and can be disarmed early + using the ARMED status register. */ + __IOM uint32_t ALARM2; /*!< Arm alarm 2, and configure the time it will fire. Once armed, + the alarm fires when TIMER_ALARM2 == TIMELR. The alarm + will disarm itself once it fires, and can be disarmed early + using the ARMED status register. */ + __IOM uint32_t ALARM3; /*!< Arm alarm 3, and configure the time it will fire. Once armed, + the alarm fires when TIMER_ALARM3 == TIMELR. The alarm + will disarm itself once it fires, and can be disarmed early + using the ARMED status register. */ + __IOM uint32_t ARMED; /*!< Indicates the armed/disarmed status of each alarm. A write to + the corresponding ALARMx register arms the alarm. Alarms + automatically disarm upon firing, but writing ones here + will disarm immediately without waiting to fire. */ + __IOM uint32_t TIMERAWH; /*!< Raw read from bits 63:32 of time (no side effects) */ + __IOM uint32_t TIMERAWL; /*!< Raw read from bits 31:0 of time (no side effects) */ + __IOM uint32_t DBGPAUSE; /*!< Set bits high to enable pause when the corresponding debug ports + are active */ + __IOM uint32_t PAUSE; /*!< Set high to pause the timer */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} TIMER_Type; /*!< Size = 68 (0x44) */ + + + +/* =========================================================================================================================== */ +/* ================ PWM ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Simple PWM (PWM) + */ + +typedef struct { /*!< PWM Structure */ + __IOM uint32_t CH0_CSR; /*!< Control and status register */ + __IOM uint32_t CH0_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH0_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH0_CC; /*!< Counter compare values */ + __IOM uint32_t CH0_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH1_CSR; /*!< Control and status register */ + __IOM uint32_t CH1_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH1_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH1_CC; /*!< Counter compare values */ + __IOM uint32_t CH1_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH2_CSR; /*!< Control and status register */ + __IOM uint32_t CH2_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH2_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH2_CC; /*!< Counter compare values */ + __IOM uint32_t CH2_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH3_CSR; /*!< Control and status register */ + __IOM uint32_t CH3_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH3_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH3_CC; /*!< Counter compare values */ + __IOM uint32_t CH3_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH4_CSR; /*!< Control and status register */ + __IOM uint32_t CH4_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH4_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH4_CC; /*!< Counter compare values */ + __IOM uint32_t CH4_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH5_CSR; /*!< Control and status register */ + __IOM uint32_t CH5_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH5_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH5_CC; /*!< Counter compare values */ + __IOM uint32_t CH5_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH6_CSR; /*!< Control and status register */ + __IOM uint32_t CH6_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH6_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH6_CC; /*!< Counter compare values */ + __IOM uint32_t CH6_TOP; /*!< Counter wrap value */ + __IOM uint32_t CH7_CSR; /*!< Control and status register */ + __IOM uint32_t CH7_DIV; /*!< INT and FRAC form a fixed-point fractional number. Counting + rate is system clock frequency divided by this number. + Fractional division uses simple 1st-order sigma-delta. */ + __IOM uint32_t CH7_CTR; /*!< Direct access to the PWM counter */ + __IOM uint32_t CH7_CC; /*!< Counter compare values */ + __IOM uint32_t CH7_TOP; /*!< Counter wrap value */ + __IOM uint32_t EN; /*!< This register aliases the CSR_EN bits for all channels. Writing + to this register allows multiple channels to be enabled + or disabled simultaneously, so they can run in perfect + sync. For each channel, there is only one physical EN register + bit, which can be accessed through here or CHx_CSR. */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} PWM_Type; /*!< Size = 180 (0xb4) */ + + + +/* =========================================================================================================================== */ +/* ================ ADC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Control and data interface to SAR ADC (ADC) + */ + +typedef struct { /*!< ADC Structure */ + __IOM uint32_t CS; /*!< ADC Control and Status */ + __IOM uint32_t RESULT; /*!< Result of most recent ADC conversion */ + __IOM uint32_t FCS; /*!< FIFO control and status */ + __IOM uint32_t FIFO; /*!< Conversion result FIFO */ + __IOM uint32_t DIV; /*!< Clock divider. If non-zero, CS_START_MANY will start conversions + at regular intervals rather than back-to-back. The divider + is reset when either of these fields are written. Total + period is 1 + INT + FRAC / 256 */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} ADC_Type; /*!< Size = 36 (0x24) */ + + + +/* =========================================================================================================================== */ +/* ================ I2C0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief DW_apb_i2c address block + + List of configuration constants for the Synopsys I2C hardware (you may see references to these in I2C register header; these are *fixed* values, set at hardware design time): + + IC_ULTRA_FAST_MODE ................ 0x0 + IC_UFM_TBUF_CNT_DEFAULT ........... 0x8 + IC_UFM_SCL_LOW_COUNT .............. 0x0008 + IC_UFM_SCL_HIGH_COUNT ............. 0x0006 + IC_TX_TL .......................... 0x0 + IC_TX_CMD_BLOCK ................... 0x1 + IC_HAS_DMA ........................ 0x1 + IC_HAS_ASYNC_FIFO ................. 0x0 + IC_SMBUS_ARP ...................... 0x0 + IC_FIRST_DATA_BYTE_STATUS ......... 0x1 + IC_INTR_IO ........................ 0x1 + IC_MASTER_MODE .................... 0x1 + IC_DEFAULT_ACK_GENERAL_CALL ....... 0x1 + IC_INTR_POL ....................... 0x1 + IC_OPTIONAL_SAR ................... 0x0 + IC_DEFAULT_TAR_SLAVE_ADDR ......... 0x055 + IC_DEFAULT_SLAVE_ADDR ............. 0x055 + IC_DEFAULT_HS_SPKLEN .............. 0x1 + IC_FS_SCL_HIGH_COUNT .............. 0x0006 + IC_HS_SCL_LOW_COUNT ............... 0x0008 + IC_DEVICE_ID_VALUE ................ 0x0 + IC_10BITADDR_MASTER ............... 0x0 + IC_CLK_FREQ_OPTIMIZATION .......... 0x0 + IC_DEFAULT_FS_SPKLEN .............. 0x7 + IC_ADD_ENCODED_PARAMS ............. 0x0 + IC_DEFAULT_SDA_HOLD ............... 0x000001 + IC_DEFAULT_SDA_SETUP .............. 0x64 + IC_AVOID_RX_FIFO_FLUSH_ON_TX_ABRT . 0x0 + IC_CLOCK_PERIOD ................... 100 + IC_EMPTYFIFO_HOLD_MASTER_EN ....... 1 + IC_RESTART_EN ..................... 0x1 + IC_TX_CMD_BLOCK_DEFAULT ........... 0x0 + IC_BUS_CLEAR_FEATURE .............. 0x0 + IC_CAP_LOADING .................... 100 + IC_FS_SCL_LOW_COUNT ............... 0x000d + APB_DATA_WIDTH .................... 32 + IC_SDA_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff + IC_SLV_DATA_NACK_ONLY ............. 0x1 + IC_10BITADDR_SLAVE ................ 0x0 + IC_CLK_TYPE ....................... 0x0 + IC_SMBUS_UDID_MSB ................. 0x0 + IC_SMBUS_SUSPEND_ALERT ............ 0x0 + IC_HS_SCL_HIGH_COUNT .............. 0x0006 + IC_SLV_RESTART_DET_EN ............. 0x1 + IC_SMBUS .......................... 0x0 + IC_OPTIONAL_SAR_DEFAULT ........... 0x0 + IC_PERSISTANT_SLV_ADDR_DEFAULT .... 0x0 + IC_USE_COUNTS ..................... 0x0 + IC_RX_BUFFER_DEPTH ................ 16 + IC_SCL_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff + IC_RX_FULL_HLD_BUS_EN ............. 0x1 + IC_SLAVE_DISABLE .................. 0x1 + IC_RX_TL .......................... 0x0 + IC_DEVICE_ID ...................... 0x0 + IC_HC_COUNT_VALUES ................ 0x0 + I2C_DYNAMIC_TAR_UPDATE ............ 0 + IC_SMBUS_CLK_LOW_MEXT_DEFAULT ..... 0xffffffff + IC_SMBUS_CLK_LOW_SEXT_DEFAULT ..... 0xffffffff + IC_HS_MASTER_CODE ................. 0x1 + IC_SMBUS_RST_IDLE_CNT_DEFAULT ..... 0xffff + IC_SMBUS_UDID_LSB_DEFAULT ......... 0xffffffff + IC_SS_SCL_HIGH_COUNT .............. 0x0028 + IC_SS_SCL_LOW_COUNT ............... 0x002f + IC_MAX_SPEED_MODE ................. 0x2 + IC_STAT_FOR_CLK_STRETCH ........... 0x0 + IC_STOP_DET_IF_MASTER_ACTIVE ...... 0x0 + IC_DEFAULT_UFM_SPKLEN ............. 0x1 + IC_TX_BUFFER_DEPTH ................ 16 (I2C0) + */ + +typedef struct { /*!< I2C0 Structure */ + __IOM uint32_t IC_CON; /*!< I2C Control Register. This register can be written only when + the DW_apb_i2c is disabled, which corresponds to the IC_ENABLE[0] + register being set to 0. Writes at other times have no + effect. Read/Write Access: - bit 10 is read only. - bit + 11 is read only - bit 16 is read only - bit 17 is read + only - bits 18 and 19 are read only. */ + __IOM uint32_t IC_TAR; /*!< I2C Target Address Register This register is 12 bits wide, and + bits 31:12 are reserved. This register can be written to + only when IC_ENABLE[0] is set to 0. Note: If the software + or application is aware that the DW_apb_i2c is not using + the TAR address for the pending commands in the Tx FIFO, + then it is possible to update the TAR address even while + the Tx FIFO has entries (IC_STATUS[2]= 0). - It is not + necessary to perform any write to this register if DW_apb_i2c + is enabled as an I2C slave only. */ + __IOM uint32_t IC_SAR; /*!< I2C Slave Address Register */ + __IM uint32_t RESERVED; + __IOM uint32_t IC_DATA_CMD; /*!< I2C Rx/Tx Data Buffer and Command Register; this is the register + the CPU writes to when filling the TX FIFO and the CPU + reads from when retrieving bytes from RX FIFO. The size + of the register changes as follows: Write: - 11 bits when + IC_EMPTYFIFO_HOLD_MASTER_EN=1 - 9 bits when IC_EMPTYFIFO_HOLD_MASTER_EN=0 + Read: - 12 bits when IC_FIRST_DATA_BYTE_STATUS = 1 - 8 + bits when IC_FIRST_DATA_BYTE_STATUS = 0 Note: In order + for the DW_apb_i2c to continue acknowledging reads, a read + command should be written for every byte that is to be + received; otherwise the DW_apb_i2c will stop acknowledging. */ + __IOM uint32_t IC_SS_SCL_HCNT; /*!< Standard Speed I2C Clock SCL High Count Register */ + __IOM uint32_t IC_SS_SCL_LCNT; /*!< Standard Speed I2C Clock SCL Low Count Register */ + __IOM uint32_t IC_FS_SCL_HCNT; /*!< Fast Mode or Fast Mode Plus I2C Clock SCL High Count Register */ + __IOM uint32_t IC_FS_SCL_LCNT; /*!< Fast Mode or Fast Mode Plus I2C Clock SCL Low Count Register */ + __IM uint32_t RESERVED1[2]; + __IOM uint32_t IC_INTR_STAT; /*!< I2C Interrupt Status Register Each bit in this register has + a corresponding mask bit in the IC_INTR_MASK register. + These bits are cleared by reading the matching interrupt + clear register. The unmasked raw versions of these bits + are available in the IC_RAW_INTR_STAT register. */ + __IOM uint32_t IC_INTR_MASK; /*!< I2C Interrupt Mask Register. These bits mask their corresponding + interrupt status bits. This register is active low; a value + of 0 masks the interrupt, whereas a value of 1 unmasks + the interrupt. */ + __IOM uint32_t IC_RAW_INTR_STAT; /*!< I2C Raw Interrupt Status Register Unlike the IC_INTR_STAT register, + these bits are not masked so they always show the true + status of the DW_apb_i2c. */ + __IOM uint32_t IC_RX_TL; /*!< I2C Receive FIFO Threshold Register */ + __IOM uint32_t IC_TX_TL; /*!< I2C Transmit FIFO Threshold Register */ + __IOM uint32_t IC_CLR_INTR; /*!< Clear Combined and Individual Interrupt Register */ + __IOM uint32_t IC_CLR_RX_UNDER; /*!< Clear RX_UNDER Interrupt Register */ + __IOM uint32_t IC_CLR_RX_OVER; /*!< Clear RX_OVER Interrupt Register */ + __IOM uint32_t IC_CLR_TX_OVER; /*!< Clear TX_OVER Interrupt Register */ + __IOM uint32_t IC_CLR_RD_REQ; /*!< Clear RD_REQ Interrupt Register */ + __IOM uint32_t IC_CLR_TX_ABRT; /*!< Clear TX_ABRT Interrupt Register */ + __IOM uint32_t IC_CLR_RX_DONE; /*!< Clear RX_DONE Interrupt Register */ + __IOM uint32_t IC_CLR_ACTIVITY; /*!< Clear ACTIVITY Interrupt Register */ + __IOM uint32_t IC_CLR_STOP_DET; /*!< Clear STOP_DET Interrupt Register */ + __IOM uint32_t IC_CLR_START_DET; /*!< Clear START_DET Interrupt Register */ + __IOM uint32_t IC_CLR_GEN_CALL; /*!< Clear GEN_CALL Interrupt Register */ + __IOM uint32_t IC_ENABLE; /*!< I2C Enable Register */ + __IOM uint32_t IC_STATUS; /*!< I2C Status Register This is a read-only register used to indicate + the current transfer status and FIFO status. The status + register may be read at any time. None of the bits in this + register request an interrupt. When the I2C is disabled + by writing 0 in bit 0 of the IC_ENABLE register: - Bits + 1 and 2 are set to 1 - Bits 3 and 10 are set to 0 When + the master or slave state machines goes to idle and ic_en=0: + - Bits 5 and 6 are set to 0 */ + __IOM uint32_t IC_TXFLR; /*!< I2C Transmit FIFO Level Register This register contains the + number of valid data entries in the transmit FIFO buffer. + It is cleared whenever: - The I2C is disabled - There is + a transmit abort - that is, TX_ABRT bit is set in the IC_RAW_INTR_STAT + register - The slave bulk transmit mode is aborted The + register increments whenever data is placed into the transmit + FIFO and decrements when data is taken from the transmit + FIFO. */ + __IOM uint32_t IC_RXFLR; /*!< I2C Receive FIFO Level Register This register contains the number + of valid data entries in the receive FIFO buffer. It is + cleared whenever: - The I2C is disabled - Whenever there + is a transmit abort caused by any of the events tracked + in IC_TX_ABRT_SOURCE The register increments whenever data + is placed into the receive FIFO and decrements when data + is taken from the receive FIFO. */ + __IOM uint32_t IC_SDA_HOLD; /*!< I2C SDA Hold Time Length Register The bits [15:0] of this register + are used to control the hold time of SDA during transmit + in both slave and master mode (after SCL goes from HIGH + to LOW). The bits [23:16] of this register are used to + extend the SDA transition (if any) whenever SCL is HIGH + in the receiver in either master or slave mode. Writes + to this register succeed only when IC_ENABLE[0]=0. The + values in this register are in units of ic_clk period. + The value programmed in IC_SDA_TX_HOLD must be greater + than the minimum hold time in each mode (one cycle in master + mode, seven cycles in slave mode) for the value to be implemented. + The programmed SDA hold time during transmit (IC_SDA_TX_HOLD) + cannot exceed at any time the duration of the low part + of scl. Therefore the programmed value cannot be larger + than N_SCL_LOW-2, where N_SCL_LOW is the duration of the + low part of the scl period measured in ic_clk cycles. */ + __IOM uint32_t IC_TX_ABRT_SOURCE; /*!< I2C Transmit Abort Source Register This register has 32 bits + that indicate the source of the TX_ABRT bit. Except for + Bit 9, this register is cleared whenever the IC_CLR_TX_ABRT + register or the IC_CLR_INTR register is read. To clear + Bit 9, the source of the ABRT_SBYTE_NORSTRT must be fixed + first; RESTART must be enabled (IC_CON[5]=1), the SPECIAL + bit must be cleared (IC_TAR[11]), or the GC_OR_START bit + must be cleared (IC_TAR[10]). Once the source of the ABRT_SBYTE_NORSTRT + is fixed, then this bit can be cleared in the same manner + as other bits in this register. If the source of the ABRT_SBYTE_NORSTRT + is not fixed before attempting to clear this bit, Bit 9 + clears for one cycle and is then re-asserted. */ + __IOM uint32_t IC_SLV_DATA_NACK_ONLY; /*!< Generate Slave Data NACK Register The register is used to generate + a NACK for the data part of a transfer when DW_apb_i2c + is acting as a slave-receiver. This register only exists + when the IC_SLV_DATA_NACK_ONLY parameter is set to 1. When + this parameter disabled, this register does not exist and + writing to the register's address has no effect. A write + can occur on this register if both of the following conditions + are met: - DW_apb_i2c is disabled (IC_ENABLE[0] = 0) - + Slave part is inactive (IC_STATUS[6] = 0) Note: The IC_STATUS[6] + is a register read-back location for the internal slv_activity + signal; the user should poll this before writing the ic_slv_data_nack_onl + bit. */ + __IOM uint32_t IC_DMA_CR; /*!< DMA Control Register The register is used to enable the DMA + Controller interface operation. There is a separate bit + for transmit and receive. This can be programmed regardless + of the state of IC_ENABLE. */ + __IOM uint32_t IC_DMA_TDLR; /*!< DMA Transmit Data Level Register */ + __IOM uint32_t IC_DMA_RDLR; /*!< I2C Receive Data Level Register */ + __IOM uint32_t IC_SDA_SETUP; /*!< I2C SDA Setup Register This register controls the amount of + time delay (in terms of number of ic_clk clock periods) + introduced in the rising edge of SCL - relative to SDA + changing - when DW_apb_i2c services a read request in a + slave-transmitter operation. The relevant I2C requirement + is tSU:DAT (note 4) as detailed in the I2C Bus Specification. + This register must be programmed with a value equal to + or greater than 2. Writes to this register succeed only + when IC_ENABLE[0] = 0. Note: The length of setup time is + calculated using [(IC_SDA_SETUP - 1) * (ic_clk_period)], + so if the user requires 10 ic_clk periods of setup time, + they should program a value of 11. The IC_SDA_SETUP register + is only used by the DW_apb_i2c when operating as a slave + transmitter. */ + __IOM uint32_t IC_ACK_GENERAL_CALL; /*!< I2C ACK General Call Register The register controls whether + DW_apb_i2c responds with a ACK or NACK when it receives + an I2C General Call address. This register is applicable + only when the DW_apb_i2c is in slave mode. */ + __IOM uint32_t IC_ENABLE_STATUS; /*!< I2C Enable Status Register The register is used to report the + DW_apb_i2c hardware status when the IC_ENABLE[0] register + is set from 1 to 0; that is, when DW_apb_i2c is disabled. + If IC_ENABLE[0] has been set to 1, bits 2:1 are forced + to 0, and bit 0 is forced to 1. If IC_ENABLE[0] has been + set to 0, bits 2:1 is only be valid as soon as bit 0 is + read as '0'. Note: When IC_ENABLE[0] has been set to 0, + a delay occurs for bit 0 to be read as 0 because disabling + the DW_apb_i2c depends on I2C bus activities. */ + __IOM uint32_t IC_FS_SPKLEN; /*!< I2C SS, FS or FM+ spike suppression limit This register is used + to store the duration, measured in ic_clk cycles, of the + longest spike that is filtered out by the spike suppression + logic when the component is operating in SS, FS or FM+ + modes. The relevant I2C requirement is tSP (table 4) as + detailed in the I2C Bus Specification. This register must + be programmed with a minimum value of 1. */ + __IM uint32_t RESERVED2; + __IOM uint32_t IC_CLR_RESTART_DET; /*!< Clear RESTART_DET Interrupt Register */ + __IM uint32_t RESERVED3[18]; + __IOM uint32_t IC_COMP_PARAM_1; /*!< Component Parameter Register 1 Note This register is not implemented + and therefore reads as 0. If it was implemented it would + be a constant read-only register that contains encoded + information about the component's parameter settings. Fields + shown below are the settings for those parameters */ + __IOM uint32_t IC_COMP_VERSION; /*!< I2C Component Version Register */ + __IOM uint32_t IC_COMP_TYPE; /*!< I2C Component Type Register */ +} I2C0_Type; /*!< Size = 256 (0x100) */ + + + +/* =========================================================================================================================== */ +/* ================ SPI0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief SPI0 (SPI0) + */ + +typedef struct { /*!< SPI0 Structure */ + __IOM uint32_t SSPCR0; /*!< Control register 0, SSPCR0 on page 3-4 */ + __IOM uint32_t SSPCR1; /*!< Control register 1, SSPCR1 on page 3-5 */ + __IOM uint32_t SSPDR; /*!< Data register, SSPDR on page 3-6 */ + __IOM uint32_t SSPSR; /*!< Status register, SSPSR on page 3-7 */ + __IOM uint32_t SSPCPSR; /*!< Clock prescale register, SSPCPSR on page 3-8 */ + __IOM uint32_t SSPIMSC; /*!< Interrupt mask set or clear register, SSPIMSC on page 3-9 */ + __IOM uint32_t SSPRIS; /*!< Raw interrupt status register, SSPRIS on page 3-10 */ + __IOM uint32_t SSPMIS; /*!< Masked interrupt status register, SSPMIS on page 3-11 */ + __IOM uint32_t SSPICR; /*!< Interrupt clear register, SSPICR on page 3-11 */ + __IOM uint32_t SSPDMACR; /*!< DMA control register, SSPDMACR on page 3-12 */ + __IM uint32_t RESERVED[1006]; + __IOM uint32_t SSPPERIPHID0; /*!< Peripheral identification registers, SSPPeriphID0-3 on page + 3-13 */ + __IOM uint32_t SSPPERIPHID1; /*!< Peripheral identification registers, SSPPeriphID0-3 on page + 3-13 */ + __IOM uint32_t SSPPERIPHID2; /*!< Peripheral identification registers, SSPPeriphID0-3 on page + 3-13 */ + __IOM uint32_t SSPPERIPHID3; /*!< Peripheral identification registers, SSPPeriphID0-3 on page + 3-13 */ + __IOM uint32_t SSPPCELLID0; /*!< PrimeCell identification registers, SSPPCellID0-3 on page 3-16 */ + __IOM uint32_t SSPPCELLID1; /*!< PrimeCell identification registers, SSPPCellID0-3 on page 3-16 */ + __IOM uint32_t SSPPCELLID2; /*!< PrimeCell identification registers, SSPPCellID0-3 on page 3-16 */ + __IOM uint32_t SSPPCELLID3; /*!< PrimeCell identification registers, SSPPCellID0-3 on page 3-16 */ +} SPI0_Type; /*!< Size = 4096 (0x1000) */ + + + +/* =========================================================================================================================== */ +/* ================ PIO0 ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Programmable IO block (PIO0) + */ + +typedef struct { /*!< PIO0 Structure */ + __IOM uint32_t CTRL; /*!< PIO control register */ + __IOM uint32_t FSTAT; /*!< FIFO status register */ + __IOM uint32_t FDEBUG; /*!< FIFO debug register */ + __IOM uint32_t FLEVEL; /*!< FIFO levels */ + __IOM uint32_t TXF0; /*!< Direct write access to the TX FIFO for this state machine. Each + write pushes one word to the FIFO. Attempting to write + to a full FIFO has no effect on the FIFO state or contents, + and sets the sticky FDEBUG_TXOVER error flag for this FIFO. */ + __IOM uint32_t TXF1; /*!< Direct write access to the TX FIFO for this state machine. Each + write pushes one word to the FIFO. Attempting to write + to a full FIFO has no effect on the FIFO state or contents, + and sets the sticky FDEBUG_TXOVER error flag for this FIFO. */ + __IOM uint32_t TXF2; /*!< Direct write access to the TX FIFO for this state machine. Each + write pushes one word to the FIFO. Attempting to write + to a full FIFO has no effect on the FIFO state or contents, + and sets the sticky FDEBUG_TXOVER error flag for this FIFO. */ + __IOM uint32_t TXF3; /*!< Direct write access to the TX FIFO for this state machine. Each + write pushes one word to the FIFO. Attempting to write + to a full FIFO has no effect on the FIFO state or contents, + and sets the sticky FDEBUG_TXOVER error flag for this FIFO. */ + __IOM uint32_t RXF0; /*!< Direct read access to the RX FIFO for this state machine. Each + read pops one word from the FIFO. Attempting to read from + an empty FIFO has no effect on the FIFO state, and sets + the sticky FDEBUG_RXUNDER error flag for this FIFO. The + data returned to the system on a read from an empty FIFO + is undefined. */ + __IOM uint32_t RXF1; /*!< Direct read access to the RX FIFO for this state machine. Each + read pops one word from the FIFO. Attempting to read from + an empty FIFO has no effect on the FIFO state, and sets + the sticky FDEBUG_RXUNDER error flag for this FIFO. The + data returned to the system on a read from an empty FIFO + is undefined. */ + __IOM uint32_t RXF2; /*!< Direct read access to the RX FIFO for this state machine. Each + read pops one word from the FIFO. Attempting to read from + an empty FIFO has no effect on the FIFO state, and sets + the sticky FDEBUG_RXUNDER error flag for this FIFO. The + data returned to the system on a read from an empty FIFO + is undefined. */ + __IOM uint32_t RXF3; /*!< Direct read access to the RX FIFO for this state machine. Each + read pops one word from the FIFO. Attempting to read from + an empty FIFO has no effect on the FIFO state, and sets + the sticky FDEBUG_RXUNDER error flag for this FIFO. The + data returned to the system on a read from an empty FIFO + is undefined. */ + __IOM uint32_t IRQ; /*!< State machine IRQ flags register. Write 1 to clear. There are + 8 state machine IRQ flags, which can be set, cleared, and + waited on by the state machines. There's no fixed association + between flags and state machines -- any state machine can + use any flag. Any of the 8 flags can be used for timing + synchronisation between state machines, using IRQ and WAIT + instructions. The lower four of these flags are also routed + out to system-level interrupt requests, alongside FIFO + status interrupts -- see e.g. IRQ0_INTE. */ + __IOM uint32_t IRQ_FORCE; /*!< Writing a 1 to each of these bits will forcibly assert the corresponding + IRQ. Note this is different to the INTF register: writing + here affects PIO internal state. INTF just asserts the + processor-facing IRQ signal for testing ISRs, and is not + visible to the state machines. */ + __IOM uint32_t INPUT_SYNC_BYPASS; /*!< There is a 2-flipflop synchronizer on each GPIO input, which + protects PIO logic from metastabilities. This increases + input delay, and for fast synchronous IO (e.g. SPI) these + synchronizers may need to be bypassed. Each bit in this + register corresponds to one GPIO. 0 -> input is synchronized + (default) 1 -> synchronizer is bypassed If in doubt, leave + this register as all zeroes. */ + __IOM uint32_t DBG_PADOUT; /*!< Read to sample the pad output values PIO is currently driving + to the GPIOs. On RP2040 there are 30 GPIOs, so the two + most significant bits are hardwired to 0. */ + __IOM uint32_t DBG_PADOE; /*!< Read to sample the pad output enables (direction) PIO is currently + driving to the GPIOs. On RP2040 there are 30 GPIOs, so + the two most significant bits are hardwired to 0. */ + __IOM uint32_t DBG_CFGINFO; /*!< The PIO hardware has some free parameters that may vary between + chip products. These should be provided in the chip datasheet, + but are also exposed here. */ + __IOM uint32_t INSTR_MEM0; /*!< Write-only access to instruction memory location 0 */ + __IOM uint32_t INSTR_MEM1; /*!< Write-only access to instruction memory location 1 */ + __IOM uint32_t INSTR_MEM2; /*!< Write-only access to instruction memory location 2 */ + __IOM uint32_t INSTR_MEM3; /*!< Write-only access to instruction memory location 3 */ + __IOM uint32_t INSTR_MEM4; /*!< Write-only access to instruction memory location 4 */ + __IOM uint32_t INSTR_MEM5; /*!< Write-only access to instruction memory location 5 */ + __IOM uint32_t INSTR_MEM6; /*!< Write-only access to instruction memory location 6 */ + __IOM uint32_t INSTR_MEM7; /*!< Write-only access to instruction memory location 7 */ + __IOM uint32_t INSTR_MEM8; /*!< Write-only access to instruction memory location 8 */ + __IOM uint32_t INSTR_MEM9; /*!< Write-only access to instruction memory location 9 */ + __IOM uint32_t INSTR_MEM10; /*!< Write-only access to instruction memory location 10 */ + __IOM uint32_t INSTR_MEM11; /*!< Write-only access to instruction memory location 11 */ + __IOM uint32_t INSTR_MEM12; /*!< Write-only access to instruction memory location 12 */ + __IOM uint32_t INSTR_MEM13; /*!< Write-only access to instruction memory location 13 */ + __IOM uint32_t INSTR_MEM14; /*!< Write-only access to instruction memory location 14 */ + __IOM uint32_t INSTR_MEM15; /*!< Write-only access to instruction memory location 15 */ + __IOM uint32_t INSTR_MEM16; /*!< Write-only access to instruction memory location 16 */ + __IOM uint32_t INSTR_MEM17; /*!< Write-only access to instruction memory location 17 */ + __IOM uint32_t INSTR_MEM18; /*!< Write-only access to instruction memory location 18 */ + __IOM uint32_t INSTR_MEM19; /*!< Write-only access to instruction memory location 19 */ + __IOM uint32_t INSTR_MEM20; /*!< Write-only access to instruction memory location 20 */ + __IOM uint32_t INSTR_MEM21; /*!< Write-only access to instruction memory location 21 */ + __IOM uint32_t INSTR_MEM22; /*!< Write-only access to instruction memory location 22 */ + __IOM uint32_t INSTR_MEM23; /*!< Write-only access to instruction memory location 23 */ + __IOM uint32_t INSTR_MEM24; /*!< Write-only access to instruction memory location 24 */ + __IOM uint32_t INSTR_MEM25; /*!< Write-only access to instruction memory location 25 */ + __IOM uint32_t INSTR_MEM26; /*!< Write-only access to instruction memory location 26 */ + __IOM uint32_t INSTR_MEM27; /*!< Write-only access to instruction memory location 27 */ + __IOM uint32_t INSTR_MEM28; /*!< Write-only access to instruction memory location 28 */ + __IOM uint32_t INSTR_MEM29; /*!< Write-only access to instruction memory location 29 */ + __IOM uint32_t INSTR_MEM30; /*!< Write-only access to instruction memory location 30 */ + __IOM uint32_t INSTR_MEM31; /*!< Write-only access to instruction memory location 31 */ + __IOM uint32_t SM0_CLKDIV; /*!< Clock divisor register for state machine 0 Frequency = clock + freq / (CLKDIV_INT + CLKDIV_FRAC / 256) */ + __IOM uint32_t SM0_EXECCTRL; /*!< Execution/behavioural settings for state machine 0 */ + __IOM uint32_t SM0_SHIFTCTRL; /*!< Control behaviour of the input/output shift registers for state + machine 0 */ + __IOM uint32_t SM0_ADDR; /*!< Current instruction address of state machine 0 */ + __IOM uint32_t SM0_INSTR; /*!< Read to see the instruction currently addressed by state machine + 0's program counter Write to execute an instruction immediately + (including jumps) and then resume execution. */ + __IOM uint32_t SM0_PINCTRL; /*!< State machine pin control */ + __IOM uint32_t SM1_CLKDIV; /*!< Clock divisor register for state machine 1 Frequency = clock + freq / (CLKDIV_INT + CLKDIV_FRAC / 256) */ + __IOM uint32_t SM1_EXECCTRL; /*!< Execution/behavioural settings for state machine 1 */ + __IOM uint32_t SM1_SHIFTCTRL; /*!< Control behaviour of the input/output shift registers for state + machine 1 */ + __IOM uint32_t SM1_ADDR; /*!< Current instruction address of state machine 1 */ + __IOM uint32_t SM1_INSTR; /*!< Read to see the instruction currently addressed by state machine + 1's program counter Write to execute an instruction immediately + (including jumps) and then resume execution. */ + __IOM uint32_t SM1_PINCTRL; /*!< State machine pin control */ + __IOM uint32_t SM2_CLKDIV; /*!< Clock divisor register for state machine 2 Frequency = clock + freq / (CLKDIV_INT + CLKDIV_FRAC / 256) */ + __IOM uint32_t SM2_EXECCTRL; /*!< Execution/behavioural settings for state machine 2 */ + __IOM uint32_t SM2_SHIFTCTRL; /*!< Control behaviour of the input/output shift registers for state + machine 2 */ + __IOM uint32_t SM2_ADDR; /*!< Current instruction address of state machine 2 */ + __IOM uint32_t SM2_INSTR; /*!< Read to see the instruction currently addressed by state machine + 2's program counter Write to execute an instruction immediately + (including jumps) and then resume execution. */ + __IOM uint32_t SM2_PINCTRL; /*!< State machine pin control */ + __IOM uint32_t SM3_CLKDIV; /*!< Clock divisor register for state machine 3 Frequency = clock + freq / (CLKDIV_INT + CLKDIV_FRAC / 256) */ + __IOM uint32_t SM3_EXECCTRL; /*!< Execution/behavioural settings for state machine 3 */ + __IOM uint32_t SM3_SHIFTCTRL; /*!< Control behaviour of the input/output shift registers for state + machine 3 */ + __IOM uint32_t SM3_ADDR; /*!< Current instruction address of state machine 3 */ + __IOM uint32_t SM3_INSTR; /*!< Read to see the instruction currently addressed by state machine + 3's program counter Write to execute an instruction immediately + (including jumps) and then resume execution. */ + __IOM uint32_t SM3_PINCTRL; /*!< State machine pin control */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t IRQ0_INTE; /*!< Interrupt Enable for irq0 */ + __IOM uint32_t IRQ0_INTF; /*!< Interrupt Force for irq0 */ + __IOM uint32_t IRQ0_INTS; /*!< Interrupt status after masking & forcing for irq0 */ + __IOM uint32_t IRQ1_INTE; /*!< Interrupt Enable for irq1 */ + __IOM uint32_t IRQ1_INTF; /*!< Interrupt Force for irq1 */ + __IOM uint32_t IRQ1_INTS; /*!< Interrupt status after masking & forcing for irq1 */ +} PIO0_Type; /*!< Size = 324 (0x144) */ + + + +/* =========================================================================================================================== */ +/* ================ BUSCTRL ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Register block for busfabric control signals and performance counters (BUSCTRL) + */ + +typedef struct { /*!< BUSCTRL Structure */ + __IOM uint32_t BUS_PRIORITY; /*!< Set the priority of each master for bus arbitration. */ + __IOM uint32_t BUS_PRIORITY_ACK; /*!< Bus priority acknowledge */ + __IOM uint32_t PERFCTR0; /*!< Bus fabric performance counter 0 */ + __IOM uint32_t PERFSEL0; /*!< Bus fabric performance event select for PERFCTR0 */ + __IOM uint32_t PERFCTR1; /*!< Bus fabric performance counter 1 */ + __IOM uint32_t PERFSEL1; /*!< Bus fabric performance event select for PERFCTR1 */ + __IOM uint32_t PERFCTR2; /*!< Bus fabric performance counter 2 */ + __IOM uint32_t PERFSEL2; /*!< Bus fabric performance event select for PERFCTR2 */ + __IOM uint32_t PERFCTR3; /*!< Bus fabric performance counter 3 */ + __IOM uint32_t PERFSEL3; /*!< Bus fabric performance event select for PERFCTR3 */ +} BUSCTRL_Type; /*!< Size = 40 (0x28) */ + + + +/* =========================================================================================================================== */ +/* ================ SIO ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Single-cycle IO block + Provides core-local and inter-core hardware for the two processors, with single-cycle access. (SIO) + */ + +typedef struct { /*!< SIO Structure */ + __IOM uint32_t CPUID; /*!< Processor core identifier */ + __IOM uint32_t GPIO_IN; /*!< Input value for GPIO pins */ + __IOM uint32_t GPIO_HI_IN; /*!< Input value for QSPI pins */ + __IM uint32_t RESERVED; + __IOM uint32_t GPIO_OUT; /*!< GPIO output value */ + __IOM uint32_t GPIO_OUT_SET; /*!< GPIO output value set */ + __IOM uint32_t GPIO_OUT_CLR; /*!< GPIO output value clear */ + __IOM uint32_t GPIO_OUT_XOR; /*!< GPIO output value XOR */ + __IOM uint32_t GPIO_OE; /*!< GPIO output enable */ + __IOM uint32_t GPIO_OE_SET; /*!< GPIO output enable set */ + __IOM uint32_t GPIO_OE_CLR; /*!< GPIO output enable clear */ + __IOM uint32_t GPIO_OE_XOR; /*!< GPIO output enable XOR */ + __IOM uint32_t GPIO_HI_OUT; /*!< QSPI output value */ + __IOM uint32_t GPIO_HI_OUT_SET; /*!< QSPI output value set */ + __IOM uint32_t GPIO_HI_OUT_CLR; /*!< QSPI output value clear */ + __IOM uint32_t GPIO_HI_OUT_XOR; /*!< QSPI output value XOR */ + __IOM uint32_t GPIO_HI_OE; /*!< QSPI output enable */ + __IOM uint32_t GPIO_HI_OE_SET; /*!< QSPI output enable set */ + __IOM uint32_t GPIO_HI_OE_CLR; /*!< QSPI output enable clear */ + __IOM uint32_t GPIO_HI_OE_XOR; /*!< QSPI output enable XOR */ + __IOM uint32_t FIFO_ST; /*!< Status register for inter-core FIFOs (mailboxes). There is one + FIFO in the core 0 -> core 1 direction, and one core 1 + -> core 0. Both are 32 bits wide and 8 words deep. Core + 0 can see the read side of the 1->0 FIFO (RX), and the + write side of 0->1 FIFO (TX). Core 1 can see the read side + of the 0->1 FIFO (RX), and the write side of 1->0 FIFO + (TX). The SIO IRQ for each core is the logical OR of the + VLD, WOF and ROE fields of its FIFO_ST register. */ + __IOM uint32_t FIFO_WR; /*!< Write access to this core's TX FIFO */ + __IOM uint32_t FIFO_RD; /*!< Read access to this core's RX FIFO */ + __IOM uint32_t SPINLOCK_ST; /*!< Spinlock state A bitmap containing the state of all 32 spinlocks + (1=locked). Mainly intended for debugging. */ + __IOM uint32_t DIV_UDIVIDEND; /*!< Divider unsigned dividend Write to the DIVIDEND operand of the + divider, i.e. the p in `p / q`. Any operand write starts + a new calculation. The results appear in QUOTIENT, REMAINDER. + UDIVIDEND/SDIVIDEND are aliases of the same internal register. + The U alias starts an unsigned calculation, and the S alias + starts a signed calculation. */ + __IOM uint32_t DIV_UDIVISOR; /*!< Divider unsigned divisor Write to the DIVISOR operand of the + divider, i.e. the q in `p / q`. Any operand write starts + a new calculation. The results appear in QUOTIENT, REMAINDER. + UDIVISOR/SDIVISOR are aliases of the same internal register. + The U alias starts an unsigned calculation, and the S alias + starts a signed calculation. */ + __IOM uint32_t DIV_SDIVIDEND; /*!< Divider signed dividend The same as UDIVIDEND, but starts a + signed calculation, rather than unsigned. */ + __IOM uint32_t DIV_SDIVISOR; /*!< Divider signed divisor The same as UDIVISOR, but starts a signed + calculation, rather than unsigned. */ + __IOM uint32_t DIV_QUOTIENT; /*!< Divider result quotient The result of `DIVIDEND / DIVISOR` (division). + Contents undefined while CSR_READY is low. For signed calculations, + QUOTIENT is negative when the signs of DIVIDEND and DIVISOR + differ. This register can be written to directly, for context + save/restore purposes. This halts any in-progress calculation + and sets the CSR_READY and CSR_DIRTY flags. Reading from + QUOTIENT clears the CSR_DIRTY flag, so should read results + in the order REMAINDER, QUOTIENT if CSR_DIRTY is used. */ + __IOM uint32_t DIV_REMAINDER; /*!< Divider result remainder The result of `DIVIDEND % DIVISOR` + (modulo). Contents undefined while CSR_READY is low. For + signed calculations, REMAINDER is negative only when DIVIDEND + is negative. This register can be written to directly, + for context save/restore purposes. This halts any in-progress + calculation and sets the CSR_READY and CSR_DIRTY flags. */ + __IOM uint32_t DIV_CSR; /*!< Control and status register for divider. */ + __IM uint32_t RESERVED1; + __IOM uint32_t INTERP0_ACCUM0; /*!< Read/write access to accumulator 0 */ + __IOM uint32_t INTERP0_ACCUM1; /*!< Read/write access to accumulator 1 */ + __IOM uint32_t INTERP0_BASE0; /*!< Read/write access to BASE0 register. */ + __IOM uint32_t INTERP0_BASE1; /*!< Read/write access to BASE1 register. */ + __IOM uint32_t INTERP0_BASE2; /*!< Read/write access to BASE2 register. */ + __IOM uint32_t INTERP0_POP_LANE0; /*!< Read LANE0 result, and simultaneously write lane results to + both accumulators (POP). */ + __IOM uint32_t INTERP0_POP_LANE1; /*!< Read LANE1 result, and simultaneously write lane results to + both accumulators (POP). */ + __IOM uint32_t INTERP0_POP_FULL; /*!< Read FULL result, and simultaneously write lane results to both + accumulators (POP). */ + __IOM uint32_t INTERP0_PEEK_LANE0; /*!< Read LANE0 result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP0_PEEK_LANE1; /*!< Read LANE1 result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP0_PEEK_FULL; /*!< Read FULL result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP0_CTRL_LANE0; /*!< Control register for lane 0 */ + __IOM uint32_t INTERP0_CTRL_LANE1; /*!< Control register for lane 1 */ + __IOM uint32_t INTERP0_ACCUM0_ADD; /*!< Values written here are atomically added to ACCUM0 Reading yields + lane 0's raw shift and mask value (BASE0 not added). */ + __IOM uint32_t INTERP0_ACCUM1_ADD; /*!< Values written here are atomically added to ACCUM1 Reading yields + lane 1's raw shift and mask value (BASE1 not added). */ + __IOM uint32_t INTERP0_BASE_1AND0; /*!< On write, the lower 16 bits go to BASE0, upper bits to BASE1 + simultaneously. Each half is sign-extended to 32 bits if + that lane's SIGNED flag is set. */ + __IOM uint32_t INTERP1_ACCUM0; /*!< Read/write access to accumulator 0 */ + __IOM uint32_t INTERP1_ACCUM1; /*!< Read/write access to accumulator 1 */ + __IOM uint32_t INTERP1_BASE0; /*!< Read/write access to BASE0 register. */ + __IOM uint32_t INTERP1_BASE1; /*!< Read/write access to BASE1 register. */ + __IOM uint32_t INTERP1_BASE2; /*!< Read/write access to BASE2 register. */ + __IOM uint32_t INTERP1_POP_LANE0; /*!< Read LANE0 result, and simultaneously write lane results to + both accumulators (POP). */ + __IOM uint32_t INTERP1_POP_LANE1; /*!< Read LANE1 result, and simultaneously write lane results to + both accumulators (POP). */ + __IOM uint32_t INTERP1_POP_FULL; /*!< Read FULL result, and simultaneously write lane results to both + accumulators (POP). */ + __IOM uint32_t INTERP1_PEEK_LANE0; /*!< Read LANE0 result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP1_PEEK_LANE1; /*!< Read LANE1 result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP1_PEEK_FULL; /*!< Read FULL result, without altering any internal state (PEEK). */ + __IOM uint32_t INTERP1_CTRL_LANE0; /*!< Control register for lane 0 */ + __IOM uint32_t INTERP1_CTRL_LANE1; /*!< Control register for lane 1 */ + __IOM uint32_t INTERP1_ACCUM0_ADD; /*!< Values written here are atomically added to ACCUM0 Reading yields + lane 0's raw shift and mask value (BASE0 not added). */ + __IOM uint32_t INTERP1_ACCUM1_ADD; /*!< Values written here are atomically added to ACCUM1 Reading yields + lane 1's raw shift and mask value (BASE1 not added). */ + __IOM uint32_t INTERP1_BASE_1AND0; /*!< On write, the lower 16 bits go to BASE0, upper bits to BASE1 + simultaneously. Each half is sign-extended to 32 bits if + that lane's SIGNED flag is set. */ + __IOM uint32_t SPINLOCK0; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK1; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK2; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK3; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK4; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK5; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK6; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK7; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK8; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK9; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK10; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK11; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK12; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK13; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK14; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK15; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK16; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK17; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK18; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK19; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK20; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK21; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK22; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK23; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK24; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK25; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK26; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK27; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK28; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK29; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK30; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ + __IOM uint32_t SPINLOCK31; /*!< Reading from a spinlock address will: - Return 0 if lock is + already locked - Otherwise return nonzero, and simultaneously + claim the lock Writing (any value) releases the lock. If + core 0 and core 1 attempt to claim the same lock simultaneously, + core 0 wins. The value returned on success is 0x1 << lock + number. */ +} SIO_Type; /*!< Size = 384 (0x180) */ + + + +/* =========================================================================================================================== */ +/* ================ USB ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief USB FS/LS controller device registers (USB) + */ + +typedef struct { /*!< USB Structure */ + __IOM uint32_t ADDR_ENDP; /*!< Device address and endpoint control */ + __IOM uint32_t ADDR_ENDP1; /*!< Interrupt endpoint 1. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP2; /*!< Interrupt endpoint 2. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP3; /*!< Interrupt endpoint 3. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP4; /*!< Interrupt endpoint 4. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP5; /*!< Interrupt endpoint 5. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP6; /*!< Interrupt endpoint 6. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP7; /*!< Interrupt endpoint 7. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP8; /*!< Interrupt endpoint 8. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP9; /*!< Interrupt endpoint 9. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP10; /*!< Interrupt endpoint 10. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP11; /*!< Interrupt endpoint 11. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP12; /*!< Interrupt endpoint 12. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP13; /*!< Interrupt endpoint 13. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP14; /*!< Interrupt endpoint 14. Only valid for HOST mode. */ + __IOM uint32_t ADDR_ENDP15; /*!< Interrupt endpoint 15. Only valid for HOST mode. */ + __IOM uint32_t MAIN_CTRL; /*!< Main control register */ + __IOM uint32_t SOF_WR; /*!< Set the SOF (Start of Frame) frame number in the host controller. + The SOF packet is sent every 1ms and the host will increment + the frame number by 1 each time. */ + __IOM uint32_t SOF_RD; /*!< Read the last SOF (Start of Frame) frame number seen. In device + mode the last SOF received from the host. In host mode + the last SOF sent by the host. */ + __IOM uint32_t SIE_CTRL; /*!< SIE control register */ + __IOM uint32_t SIE_STATUS; /*!< SIE status register */ + __IOM uint32_t INT_EP_CTRL; /*!< interrupt endpoint control register */ + __IOM uint32_t BUFF_STATUS; /*!< Buffer status register. A bit set here indicates that a buffer + has completed on the endpoint (if the buffer interrupt + is enabled). It is possible for 2 buffers to be completed, + so clearing the buffer status bit may instantly re set + it on the next clock cycle. */ + __IOM uint32_t BUFF_CPU_SHOULD_HANDLE; /*!< Which of the double buffers should be handled. Only valid if + using an interrupt per buffer (i.e. not per 2 buffers). + Not valid for host interrupt endpoint polling because they + are only single buffered. */ + __IOM uint32_t EP_ABORT; /*!< Device only: Can be set to ignore the buffer control register + for this endpoint in case you would like to revoke a buffer. + A NAK will be sent for every access to the endpoint until + this bit is cleared. A corresponding bit in `EP_ABORT_DONE` + is set when it is safe to modify the buffer control register. */ + __IOM uint32_t EP_ABORT_DONE; /*!< Device only: Used in conjunction with `EP_ABORT`. Set once an + endpoint is idle so the programmer knows it is safe to + modify the buffer control register. */ + __IOM uint32_t EP_STALL_ARM; /*!< Device: this bit must be set in conjunction with the `STALL` + bit in the buffer control register to send a STALL on EP0. + The device controller clears these bits when a SETUP packet + is received because the USB spec requires that a STALL + condition is cleared when a SETUP packet is received. */ + __IOM uint32_t NAK_POLL; /*!< Used by the host controller. Sets the wait time in microseconds + before trying again if the device replies with a NAK. */ + __IOM uint32_t EP_STATUS_STALL_NAK; /*!< Device: bits are set when the `IRQ_ON_NAK` or `IRQ_ON_STALL` + bits are set. For EP0 this comes from `SIE_CTRL`. For all + other endpoints it comes from the endpoint control register. */ + __IOM uint32_t USB_MUXING; /*!< Where to connect the USB controller. Should be to_phy by default. */ + __IOM uint32_t USB_PWR; /*!< Overrides for the power signals in the event that the VBUS signals + are not hooked up to GPIO. Set the value of the override + and then the override enable so switch over to the override + value. */ + __IOM uint32_t USBPHY_DIRECT; /*!< Note that most functions are driven directly from usb_fsls controller. + This register allows more detailed control/status from + the USB PHY. Useful for debug but not expected to be used + in normal operation Use in conjunction with usbphy_direct_override + register */ + __IOM uint32_t USBPHY_DIRECT_OVERRIDE; /*!< USBPHY_DIRECT_OVERRIDE */ + __IOM uint32_t USBPHY_TRIM; /*!< Note that most functions are driven directly from usb_fsls controller. + This register allows more detailed control/status from + the USB PHY. Useful for debug but not expected to be used + in normal operation */ + __IM uint32_t RESERVED; + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} USB_Type; /*!< Size = 156 (0x9c) */ + + + +/* =========================================================================================================================== */ +/* ================ USB_DPRAM ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief DPRAM layout for USB device. (USB_DPRAM) + */ + +typedef struct { /*!< USB_DPRAM Structure */ + __IOM uint32_t SETUP_PACKET_LOW; /*!< Bytes 0-3 of the SETUP packet from the host. */ + __IOM uint32_t SETUP_PACKET_HIGH; /*!< Bytes 4-7 of the setup packet from the host. */ + __IOM uint32_t EP1_IN_CONTROL; /*!< EP1_IN_CONTROL */ + __IOM uint32_t EP1_OUT_CONTROL; /*!< EP1_OUT_CONTROL */ + __IOM uint32_t EP2_IN_CONTROL; /*!< EP2_IN_CONTROL */ + __IOM uint32_t EP2_OUT_CONTROL; /*!< EP2_OUT_CONTROL */ + __IOM uint32_t EP3_IN_CONTROL; /*!< EP3_IN_CONTROL */ + __IOM uint32_t EP3_OUT_CONTROL; /*!< EP3_OUT_CONTROL */ + __IOM uint32_t EP4_IN_CONTROL; /*!< EP4_IN_CONTROL */ + __IOM uint32_t EP4_OUT_CONTROL; /*!< EP4_OUT_CONTROL */ + __IOM uint32_t EP5_IN_CONTROL; /*!< EP5_IN_CONTROL */ + __IOM uint32_t EP5_OUT_CONTROL; /*!< EP5_OUT_CONTROL */ + __IOM uint32_t EP6_IN_CONTROL; /*!< EP6_IN_CONTROL */ + __IOM uint32_t EP6_OUT_CONTROL; /*!< EP6_OUT_CONTROL */ + __IOM uint32_t EP7_IN_CONTROL; /*!< EP7_IN_CONTROL */ + __IOM uint32_t EP7_OUT_CONTROL; /*!< EP7_OUT_CONTROL */ + __IOM uint32_t EP8_IN_CONTROL; /*!< EP8_IN_CONTROL */ + __IOM uint32_t EP8_OUT_CONTROL; /*!< EP8_OUT_CONTROL */ + __IOM uint32_t EP9_IN_CONTROL; /*!< EP9_IN_CONTROL */ + __IOM uint32_t EP9_OUT_CONTROL; /*!< EP9_OUT_CONTROL */ + __IOM uint32_t EP10_IN_CONTROL; /*!< EP10_IN_CONTROL */ + __IOM uint32_t EP10_OUT_CONTROL; /*!< EP10_OUT_CONTROL */ + __IOM uint32_t EP11_IN_CONTROL; /*!< EP11_IN_CONTROL */ + __IOM uint32_t EP11_OUT_CONTROL; /*!< EP11_OUT_CONTROL */ + __IOM uint32_t EP12_IN_CONTROL; /*!< EP12_IN_CONTROL */ + __IOM uint32_t EP12_OUT_CONTROL; /*!< EP12_OUT_CONTROL */ + __IOM uint32_t EP13_IN_CONTROL; /*!< EP13_IN_CONTROL */ + __IOM uint32_t EP13_OUT_CONTROL; /*!< EP13_OUT_CONTROL */ + __IOM uint32_t EP14_IN_CONTROL; /*!< EP14_IN_CONTROL */ + __IOM uint32_t EP14_OUT_CONTROL; /*!< EP14_OUT_CONTROL */ + __IOM uint32_t EP15_IN_CONTROL; /*!< EP15_IN_CONTROL */ + __IOM uint32_t EP15_OUT_CONTROL; /*!< EP15_OUT_CONTROL */ + __IOM uint32_t EP0_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP0_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP1_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP1_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP2_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP2_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP3_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP3_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP4_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP4_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP5_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP5_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP6_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP6_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP7_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP7_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP8_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP8_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP9_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP9_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP10_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP10_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP11_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP11_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP12_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP12_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP13_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP13_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP14_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP14_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP15_IN_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ + __IOM uint32_t EP15_OUT_BUFFER_CONTROL; /*!< Buffer control for both buffers of an endpoint. Fields ending + in a _1 are for buffer 1. Fields ending in a _0 are for + buffer 0. Buffer 1 controls are only valid if the endpoint + is in double buffered mode. */ +} USB_DPRAM_Type; /*!< Size = 256 (0x100) */ + + + +/* =========================================================================================================================== */ +/* ================ TBMAN ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Testbench manager. Allows the programmer to know what platform their software is running on. (TBMAN) + */ + +typedef struct { /*!< TBMAN Structure */ + __IOM uint32_t PLATFORM; /*!< Indicates the type of platform in use */ +} TBMAN_Type; /*!< Size = 4 (0x4) */ + + + +/* =========================================================================================================================== */ +/* ================ VREG_AND_CHIP_RESET ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief control and status for on-chip voltage regulator and chip level reset subsystem (VREG_AND_CHIP_RESET) + */ + +typedef struct { /*!< VREG_AND_CHIP_RESET Structure */ + __IOM uint32_t VREG; /*!< Voltage regulator control and status */ + __IOM uint32_t BOD; /*!< brown-out detection control */ + __IOM uint32_t CHIP_RESET; /*!< Chip reset control and status */ +} VREG_AND_CHIP_RESET_Type; /*!< Size = 12 (0xc) */ + + + +/* =========================================================================================================================== */ +/* ================ RTC ================ */ +/* =========================================================================================================================== */ + + +/** + * @brief Register block to control RTC (RTC) + */ + +typedef struct { /*!< RTC Structure */ + __IOM uint32_t CLKDIV_M1; /*!< Divider minus 1 for the 1 second counter. Safe to change the + value when RTC is not enabled. */ + __IOM uint32_t SETUP_0; /*!< RTC setup register 0 */ + __IOM uint32_t SETUP_1; /*!< RTC setup register 1 */ + __IOM uint32_t CTRL; /*!< RTC Control and status */ + __IOM uint32_t IRQ_SETUP_0; /*!< Interrupt setup register 0 */ + __IOM uint32_t IRQ_SETUP_1; /*!< Interrupt setup register 1 */ + __IOM uint32_t RTC_1; /*!< RTC register 1. */ + __IOM uint32_t RTC_0; /*!< RTC register 0 Read this before RTC 1! */ + __IOM uint32_t INTR; /*!< Raw Interrupts */ + __IOM uint32_t INTE; /*!< Interrupt Enable */ + __IOM uint32_t INTF; /*!< Interrupt Force */ + __IOM uint32_t INTS; /*!< Interrupt status after masking & forcing */ +} RTC_Type; /*!< Size = 48 (0x30) */ + + +/** @} */ /* End of group Device_Peripheral_peripherals */ + + +/* =========================================================================================================================== */ +/* ================ Device Specific Peripheral Address Map ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_peripheralAddr + * @{ + */ + +#if 0 +#define RESETS_BASE 0x4000C000UL +#define PSM_BASE 0x40010000UL +#define CLOCKS_BASE 0x40008000UL +#define PADS_BANK0_BASE 0x4001C000UL +#define PADS_QSPI_BASE 0x40020000UL +#define IO_QSPI_BASE 0x40018000UL +#define IO_BANK0_BASE 0x40014000UL +#define SYSINFO_BASE 0x40000000UL +#define PPB_BASE 0xE0000000UL +#define SSI_BASE 0x18000000UL +#define XIP_CTRL_BASE 0x14000000UL +#define SYSCFG_BASE 0x40004000UL +#define XOSC_BASE 0x40024000UL +#define PLL_SYS_BASE 0x40028000UL +#define PLL_USB_BASE 0x4002C000UL +#define UART0_BASE 0x40034000UL +#define UART1_BASE 0x40038000UL +#define ROSC_BASE 0x40060000UL +#define WATCHDOG_BASE 0x40058000UL +#define DMA_BASE 0x50000000UL +#define TIMER_BASE 0x40054000UL +#define PWM_BASE 0x40050000UL +#define ADC_BASE 0x4004C000UL +#define I2C0_BASE 0x40044000UL +#define I2C1_BASE 0x40048000UL +#define SPI0_BASE 0x4003C000UL +#define SPI1_BASE 0x40040000UL +#define PIO0_BASE 0x50200000UL +#define PIO1_BASE 0x50300000UL +#define BUSCTRL_BASE 0x40030000UL +#define SIO_BASE 0xD0000000UL +#define USB_BASE 0x50110000UL +#define USB_DPRAM_BASE 0x50100000UL +#define TBMAN_BASE 0x4006C000UL +#define VREG_AND_CHIP_RESET_BASE 0x40064000UL +#define RTC_BASE 0x4005C000UL +#endif + +/** @} */ /* End of group Device_Peripheral_peripheralAddr */ + + +/* =========================================================================================================================== */ +/* ================ Peripheral declaration ================ */ +/* =========================================================================================================================== */ + + +/** @addtogroup Device_Peripheral_declaration + * @{ + */ + +#define RESETS ((RESETS_Type*) RESETS_BASE) +#define PSM ((PSM_Type*) PSM_BASE) +#define CLOCKS ((CLOCKS_Type*) CLOCKS_BASE) +#define PADS_BANK0 ((PADS_BANK0_Type*) PADS_BANK0_BASE) +#define PADS_QSPI ((PADS_QSPI_Type*) PADS_QSPI_BASE) +#define IO_QSPI ((IO_QSPI_Type*) IO_QSPI_BASE) +#define IO_BANK0 ((IO_BANK0_Type*) IO_BANK0_BASE) +#define SYSINFO ((SYSINFO_Type*) SYSINFO_BASE) +#define PPB ((PPB_Type*) PPB_BASE) +#define SSI ((SSI_Type*) SSI_BASE) +#define XIP_CTRL ((XIP_CTRL_Type*) XIP_CTRL_BASE) +#define SYSCFG ((SYSCFG_Type*) SYSCFG_BASE) +#define XOSC ((XOSC_Type*) XOSC_BASE) +#define PLL_SYS ((PLL_SYS_Type*) PLL_SYS_BASE) +#define PLL_USB ((PLL_SYS_Type*) PLL_USB_BASE) +#define UART0 ((UART0_Type*) UART0_BASE) +#define UART1 ((UART0_Type*) UART1_BASE) +#define ROSC ((ROSC_Type*) ROSC_BASE) +#define WATCHDOG ((WATCHDOG_Type*) WATCHDOG_BASE) +#define DMA ((DMA_Type*) DMA_BASE) +#define TIMER ((TIMER_Type*) TIMER_BASE) +#define PWM ((PWM_Type*) PWM_BASE) +#define ADC ((ADC_Type*) ADC_BASE) +#define I2C0 ((I2C0_Type*) I2C0_BASE) +#define I2C1 ((I2C0_Type*) I2C1_BASE) +#define SPI0 ((SPI0_Type*) SPI0_BASE) +#define SPI1 ((SPI0_Type*) SPI1_BASE) +#define PIO0 ((PIO0_Type*) PIO0_BASE) +#define PIO1 ((PIO0_Type*) PIO1_BASE) +#define BUSCTRL ((BUSCTRL_Type*) BUSCTRL_BASE) +#define SIO ((SIO_Type*) SIO_BASE) +#define USB ((USB_Type*) USB_BASE) +#define USB_DPRAM ((USB_DPRAM_Type*) USB_DPRAM_BASE) +#define TBMAN ((TBMAN_Type*) TBMAN_BASE) +#define VREG_AND_CHIP_RESET ((VREG_AND_CHIP_RESET_Type*) VREG_AND_CHIP_RESET_BASE) +#define RTC ((RTC_Type*) RTC_BASE) + +/** @} */ /* End of group Device_Peripheral_declaration */ + + +#ifdef __cplusplus +} +#endif + +#endif /* RP2040_H */ + + +/** @} */ /* End of group RP2040 */ + +/** @} */ /* End of group Raspberry Pi */ diff --git a/lib/rp2040/cmsis_include/system_RP2040.h b/lib/pico-sdk/rp2040/cmsis_include/system_RP2040.h index 30881ccc..30881ccc 100644 --- a/lib/rp2040/cmsis_include/system_RP2040.h +++ b/lib/pico-sdk/rp2040/cmsis_include/system_RP2040.h diff --git a/lib/pico-sdk/rp2040/hardware/platform_defs.h b/lib/pico-sdk/rp2040/hardware/platform_defs.h new file mode 100644 index 00000000..54d9344c --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/platform_defs.h @@ -0,0 +1,119 @@ +/* + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef _HARDWARE_PLATFORM_DEFS_H +#define _HARDWARE_PLATFORM_DEFS_H + +// This header is included from C and assembler - intended mostly for #defines; guard other stuff with #ifdef __ASSEMBLER__ + +#ifndef _u +#ifdef __ASSEMBLER__ +#define _u(x) x +#else +#define _u(x) x ## u +#endif +#endif + +#define NUM_CORES _u(2) +#define NUM_DMA_CHANNELS _u(12) +#define NUM_DMA_TIMERS _u(4) +#define NUM_DMA_IRQS _u(2) +#define NUM_IRQS _u(32) +#define NUM_USER_IRQS _u(6) +#define NUM_PIOS _u(2) +#define NUM_PIO_STATE_MACHINES _u(4) +#define NUM_PIO_IRQS _u(2) +#define NUM_PWM_SLICES _u(8) +#define NUM_PWM_IRQS _u(1) +#define NUM_SPIN_LOCKS _u(32) +#define NUM_UARTS _u(2) +#define NUM_I2CS _u(2) +#define NUM_SPIS _u(2) +#define NUM_GENERIC_TIMERS _u(1) +#define NUM_ALARMS _u(4) +#define ADC_BASE_PIN _u(26) +#define NUM_ADC_CHANNELS _u(5) +#define NUM_RESETS _u(24) +#define NUM_BANK0_GPIOS _u(30) +#define NUM_QSPI_GPIOS _u(6) + +#define PIO_INSTRUCTION_COUNT _u(32) + +#define USBCTRL_DPRAM_SIZE _u(4096) + +#define HAS_SIO_DIVIDER 1 +#define HAS_RP2040_RTC 1 +// PICO_CONFIG: XOSC_HZ, Crystal oscillator frequency in Hz, type=int, default=12000000, advanced=true, group=hardware_base +// NOTE: The system and USB clocks are generated from the frequency using two PLLs. +// If you override this define, or SYS_CLK_HZ/USB_CLK_HZ below, you will *also* need to add your own adjusted PLL set-up defines to +// override the defaults which live in src/rp2_common/hardware_clocks/include/hardware/clocks.h +// Please see the comments there about calculating the new PLL setting values. +#ifndef XOSC_HZ +#ifdef XOSC_KHZ +#define XOSC_HZ ((XOSC_KHZ) * _u(1000)) +#elif defined(XOSC_MHZ) +#define XOSC_HZ ((XOSC_MHZ) * _u(1000000)) +#else +#define XOSC_HZ _u(12000000) +#endif +#endif + +// PICO_CONFIG: SYS_CLK_HZ, System operating frequency in Hz, type=int, default=125000000, advanced=true, group=hardware_base +#ifndef SYS_CLK_HZ +#ifdef SYS_CLK_KHZ +#define SYS_CLK_HZ ((SYS_CLK_KHZ) * _u(1000)) +#elif defined(SYS_CLK_MHZ) +#define SYS_CLK_HZ ((SYS_CLK_MHZ) * _u(1000000)) +#else +#define SYS_CLK_HZ _u(125000000) +#endif +#endif + +// PICO_CONFIG: USB_CLK_HZ, USB clock frequency. Must be 48MHz for the USB interface to operate correctly, type=int, default=48000000, advanced=true, group=hardware_base +#ifndef USB_CLK_HZ +#ifdef USB_CLK_KHZ +#define USB_CLK_HZ ((USB_CLK_KHZ) * _u(1000)) +#elif defined(USB_CLK_MHZ) +#define USB_CLK_HZ ((USB_CLK_MHZ) * _u(1000000)) +#else +#define USB_CLK_HZ _u(48000000) +#endif +#endif + +// For backwards compatibility define XOSC_KHZ if the frequency is indeed an integer number of Khz. +#if defined(XOSC_HZ) && !defined(XOSC_KHZ) && (XOSC_HZ % 1000 == 0) +#define XOSC_KHZ (XOSC_HZ / 1000) +#endif + +// For backwards compatibility define XOSC_MHZ if the frequency is indeed an integer number of Mhz. +#if defined(XOSC_KHZ) && !defined(XOSC_MHZ) && (XOSC_KHZ % 1000 == 0) +#define XOSC_MHZ (XOSC_KHZ / 1000) +#endif + +// For backwards compatibility define SYS_CLK_KHZ if the frequency is indeed an integer number of Khz. +#if defined(SYS_CLK_HZ) && !defined(SYS_CLK_KHZ) && (SYS_CLK_HZ % 1000 == 0) +#define SYS_CLK_KHZ (SYS_CLK_HZ / 1000) +#endif + +// For backwards compatibility define SYS_CLK_MHZ if the frequency is indeed an integer number of Mhz. +#if defined(SYS_CLK_KHZ) && !defined(SYS_CLK_MHZ) && (SYS_CLK_KHZ % 1000 == 0) +#define SYS_CLK_MHZ (SYS_CLK_KHZ / 1000) +#endif + +// For backwards compatibility define USB_CLK_KHZ if the frequency is indeed an integer number of Khz. +#if defined(USB_CLK_HZ) && !defined(USB_CLK_KHZ) && (USB_CLK_HZ % 1000 == 0) +#define USB_CLK_KHZ (USB_CLK_HZ / 1000) +#endif + +// For backwards compatibility define USB_CLK_MHZ if the frequency is indeed an integer number of Mhz. +#if defined(USB_CLK_KHZ) && !defined(USB_CLK_MHZ) && (USB_CLK_KHZ % 1000 == 0) +#define USB_CLK_MHZ (USB_CLK_KHZ / 1000) +#endif + +#define FIRST_USER_IRQ (NUM_IRQS - NUM_USER_IRQS) +#define VTABLE_FIRST_IRQ 16 + +#endif diff --git a/lib/rp2040/hardware/regs/adc.h b/lib/pico-sdk/rp2040/hardware/regs/adc.h index 47510be5..3077f162 100644 --- a/lib/rp2040/hardware/regs/adc.h +++ b/lib/pico-sdk/rp2040/hardware/regs/adc.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : Control and data interface to SAR ADC // ============================================================================= -#ifndef HARDWARE_REGS_ADC_DEFINED -#define HARDWARE_REGS_ADC_DEFINED +#ifndef _HARDWARE_REGS_ADC_H +#define _HARDWARE_REGS_ADC_H // ============================================================================= // Register : ADC_CS // Description : ADC Control and Status @@ -25,8 +27,8 @@ // round-robin fashion. // The first channel to be sampled will be the one currently // indicated by AINSEL. -// AINSEL will be updated after each conversion with the -// newly-selected channel. +// AINSEL will be updated after each conversion with the newly- +// selected channel. #define ADC_CS_RROBIN_RESET _u(0x00) #define ADC_CS_RROBIN_BITS _u(0x001f0000) #define ADC_CS_RROBIN_MSB _u(20) @@ -153,7 +155,6 @@ #define ADC_FCS_UNDER_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : ADC_FCS_FULL -// Description : None #define ADC_FCS_FULL_RESET _u(0x0) #define ADC_FCS_FULL_BITS _u(0x00000200) #define ADC_FCS_FULL_MSB _u(9) @@ -161,7 +162,6 @@ #define ADC_FCS_FULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : ADC_FCS_EMPTY -// Description : None #define ADC_FCS_EMPTY_RESET _u(0x0) #define ADC_FCS_EMPTY_BITS _u(0x00000100) #define ADC_FCS_EMPTY_MSB _u(8) @@ -218,7 +218,6 @@ #define ADC_FIFO_ERR_ACCESS "RF" // ----------------------------------------------------------------------------- // Field : ADC_FIFO_VAL -// Description : None #define ADC_FIFO_VAL_RESET "-" #define ADC_FIFO_VAL_BITS _u(0x00000fff) #define ADC_FIFO_VAL_MSB _u(11) @@ -311,4 +310,5 @@ #define ADC_INTS_FIFO_LSB _u(0) #define ADC_INTS_FIFO_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_ADC_DEFINED +#endif // _HARDWARE_REGS_ADC_H + diff --git a/lib/rp2040/hardware/regs/addressmap.h b/lib/pico-sdk/rp2040/hardware/regs/addressmap.h index b39ab45f..61da68c5 100644 --- a/lib/rp2040/hardware/regs/addressmap.h +++ b/lib/pico-sdk/rp2040/hardware/regs/addressmap.h @@ -1,18 +1,24 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ -#ifndef _ADDRESSMAP_H_ -#define _ADDRESSMAP_H_ +#ifndef _ADDRESSMAP_H +#define _ADDRESSMAP_H + +/** + * \file rp2040/addressmap.h + */ #include "hardware/platform_defs.h" // Register address offsets for atomic RMW aliases -#define REG_ALIAS_RW_BITS (0x0u << 12u) -#define REG_ALIAS_XOR_BITS (0x1u << 12u) -#define REG_ALIAS_SET_BITS (0x2u << 12u) -#define REG_ALIAS_CLR_BITS (0x3u << 12u) +#define REG_ALIAS_RW_BITS (_u(0x0) << _u(12)) +#define REG_ALIAS_XOR_BITS (_u(0x1) << _u(12)) +#define REG_ALIAS_SET_BITS (_u(0x2) << _u(12)) +#define REG_ALIAS_CLR_BITS (_u(0x3) << _u(12)) #define ROM_BASE _u(0x00000000) #define XIP_BASE _u(0x10000000) @@ -71,4 +77,5 @@ #define SIO_BASE _u(0xd0000000) #define PPB_BASE _u(0xe0000000) -#endif // _ADDRESSMAP_H_ +#endif // _ADDRESSMAP_H + diff --git a/lib/rp2040/hardware/regs/busctrl.h b/lib/pico-sdk/rp2040/hardware/regs/busctrl.h index 8be0d866..ee5f153e 100644 --- a/lib/rp2040/hardware/regs/busctrl.h +++ b/lib/pico-sdk/rp2040/hardware/regs/busctrl.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -10,8 +12,8 @@ // Description : Register block for busfabric control signals and performance // counters // ============================================================================= -#ifndef HARDWARE_REGS_BUSCTRL_DEFINED -#define HARDWARE_REGS_BUSCTRL_DEFINED +#ifndef _HARDWARE_REGS_BUSCTRL_H +#define _HARDWARE_REGS_BUSCTRL_H // ============================================================================= // Register : BUSCTRL_BUS_PRIORITY // Description : Set the priority of each master for bus arbitration. @@ -102,32 +104,32 @@ // 0x11 -> xip_main // 0x12 -> rom_contested // 0x13 -> rom -#define BUSCTRL_PERFSEL0_OFFSET _u(0x0000000c) -#define BUSCTRL_PERFSEL0_BITS _u(0x0000001f) -#define BUSCTRL_PERFSEL0_RESET _u(0x0000001f) -#define BUSCTRL_PERFSEL0_MSB _u(4) -#define BUSCTRL_PERFSEL0_LSB _u(0) -#define BUSCTRL_PERFSEL0_ACCESS "RW" -#define BUSCTRL_PERFSEL0_VALUE_APB_CONTESTED _u(0x00) -#define BUSCTRL_PERFSEL0_VALUE_APB _u(0x01) +#define BUSCTRL_PERFSEL0_OFFSET _u(0x0000000c) +#define BUSCTRL_PERFSEL0_BITS _u(0x0000001f) +#define BUSCTRL_PERFSEL0_RESET _u(0x0000001f) +#define BUSCTRL_PERFSEL0_MSB _u(4) +#define BUSCTRL_PERFSEL0_LSB _u(0) +#define BUSCTRL_PERFSEL0_ACCESS "RW" +#define BUSCTRL_PERFSEL0_VALUE_APB_CONTESTED _u(0x00) +#define BUSCTRL_PERFSEL0_VALUE_APB _u(0x01) #define BUSCTRL_PERFSEL0_VALUE_FASTPERI_CONTESTED _u(0x02) -#define BUSCTRL_PERFSEL0_VALUE_FASTPERI _u(0x03) -#define BUSCTRL_PERFSEL0_VALUE_SRAM5_CONTESTED _u(0x04) -#define BUSCTRL_PERFSEL0_VALUE_SRAM5 _u(0x05) -#define BUSCTRL_PERFSEL0_VALUE_SRAM4_CONTESTED _u(0x06) -#define BUSCTRL_PERFSEL0_VALUE_SRAM4 _u(0x07) -#define BUSCTRL_PERFSEL0_VALUE_SRAM3_CONTESTED _u(0x08) -#define BUSCTRL_PERFSEL0_VALUE_SRAM3 _u(0x09) -#define BUSCTRL_PERFSEL0_VALUE_SRAM2_CONTESTED _u(0x0a) -#define BUSCTRL_PERFSEL0_VALUE_SRAM2 _u(0x0b) -#define BUSCTRL_PERFSEL0_VALUE_SRAM1_CONTESTED _u(0x0c) -#define BUSCTRL_PERFSEL0_VALUE_SRAM1 _u(0x0d) -#define BUSCTRL_PERFSEL0_VALUE_SRAM0_CONTESTED _u(0x0e) -#define BUSCTRL_PERFSEL0_VALUE_SRAM0 _u(0x0f) +#define BUSCTRL_PERFSEL0_VALUE_FASTPERI _u(0x03) +#define BUSCTRL_PERFSEL0_VALUE_SRAM5_CONTESTED _u(0x04) +#define BUSCTRL_PERFSEL0_VALUE_SRAM5 _u(0x05) +#define BUSCTRL_PERFSEL0_VALUE_SRAM4_CONTESTED _u(0x06) +#define BUSCTRL_PERFSEL0_VALUE_SRAM4 _u(0x07) +#define BUSCTRL_PERFSEL0_VALUE_SRAM3_CONTESTED _u(0x08) +#define BUSCTRL_PERFSEL0_VALUE_SRAM3 _u(0x09) +#define BUSCTRL_PERFSEL0_VALUE_SRAM2_CONTESTED _u(0x0a) +#define BUSCTRL_PERFSEL0_VALUE_SRAM2 _u(0x0b) +#define BUSCTRL_PERFSEL0_VALUE_SRAM1_CONTESTED _u(0x0c) +#define BUSCTRL_PERFSEL0_VALUE_SRAM1 _u(0x0d) +#define BUSCTRL_PERFSEL0_VALUE_SRAM0_CONTESTED _u(0x0e) +#define BUSCTRL_PERFSEL0_VALUE_SRAM0 _u(0x0f) #define BUSCTRL_PERFSEL0_VALUE_XIP_MAIN_CONTESTED _u(0x10) -#define BUSCTRL_PERFSEL0_VALUE_XIP_MAIN _u(0x11) -#define BUSCTRL_PERFSEL0_VALUE_ROM_CONTESTED _u(0x12) -#define BUSCTRL_PERFSEL0_VALUE_ROM _u(0x13) +#define BUSCTRL_PERFSEL0_VALUE_XIP_MAIN _u(0x11) +#define BUSCTRL_PERFSEL0_VALUE_ROM_CONTESTED _u(0x12) +#define BUSCTRL_PERFSEL0_VALUE_ROM _u(0x13) // ============================================================================= // Register : BUSCTRL_PERFCTR1 // Description : Bus fabric performance counter 1 @@ -166,32 +168,32 @@ // 0x11 -> xip_main // 0x12 -> rom_contested // 0x13 -> rom -#define BUSCTRL_PERFSEL1_OFFSET _u(0x00000014) -#define BUSCTRL_PERFSEL1_BITS _u(0x0000001f) -#define BUSCTRL_PERFSEL1_RESET _u(0x0000001f) -#define BUSCTRL_PERFSEL1_MSB _u(4) -#define BUSCTRL_PERFSEL1_LSB _u(0) -#define BUSCTRL_PERFSEL1_ACCESS "RW" -#define BUSCTRL_PERFSEL1_VALUE_APB_CONTESTED _u(0x00) -#define BUSCTRL_PERFSEL1_VALUE_APB _u(0x01) +#define BUSCTRL_PERFSEL1_OFFSET _u(0x00000014) +#define BUSCTRL_PERFSEL1_BITS _u(0x0000001f) +#define BUSCTRL_PERFSEL1_RESET _u(0x0000001f) +#define BUSCTRL_PERFSEL1_MSB _u(4) +#define BUSCTRL_PERFSEL1_LSB _u(0) +#define BUSCTRL_PERFSEL1_ACCESS "RW" +#define BUSCTRL_PERFSEL1_VALUE_APB_CONTESTED _u(0x00) +#define BUSCTRL_PERFSEL1_VALUE_APB _u(0x01) #define BUSCTRL_PERFSEL1_VALUE_FASTPERI_CONTESTED _u(0x02) -#define BUSCTRL_PERFSEL1_VALUE_FASTPERI _u(0x03) -#define BUSCTRL_PERFSEL1_VALUE_SRAM5_CONTESTED _u(0x04) -#define BUSCTRL_PERFSEL1_VALUE_SRAM5 _u(0x05) -#define BUSCTRL_PERFSEL1_VALUE_SRAM4_CONTESTED _u(0x06) -#define BUSCTRL_PERFSEL1_VALUE_SRAM4 _u(0x07) -#define BUSCTRL_PERFSEL1_VALUE_SRAM3_CONTESTED _u(0x08) -#define BUSCTRL_PERFSEL1_VALUE_SRAM3 _u(0x09) -#define BUSCTRL_PERFSEL1_VALUE_SRAM2_CONTESTED _u(0x0a) -#define BUSCTRL_PERFSEL1_VALUE_SRAM2 _u(0x0b) -#define BUSCTRL_PERFSEL1_VALUE_SRAM1_CONTESTED _u(0x0c) -#define BUSCTRL_PERFSEL1_VALUE_SRAM1 _u(0x0d) -#define BUSCTRL_PERFSEL1_VALUE_SRAM0_CONTESTED _u(0x0e) -#define BUSCTRL_PERFSEL1_VALUE_SRAM0 _u(0x0f) +#define BUSCTRL_PERFSEL1_VALUE_FASTPERI _u(0x03) +#define BUSCTRL_PERFSEL1_VALUE_SRAM5_CONTESTED _u(0x04) +#define BUSCTRL_PERFSEL1_VALUE_SRAM5 _u(0x05) +#define BUSCTRL_PERFSEL1_VALUE_SRAM4_CONTESTED _u(0x06) +#define BUSCTRL_PERFSEL1_VALUE_SRAM4 _u(0x07) +#define BUSCTRL_PERFSEL1_VALUE_SRAM3_CONTESTED _u(0x08) +#define BUSCTRL_PERFSEL1_VALUE_SRAM3 _u(0x09) +#define BUSCTRL_PERFSEL1_VALUE_SRAM2_CONTESTED _u(0x0a) +#define BUSCTRL_PERFSEL1_VALUE_SRAM2 _u(0x0b) +#define BUSCTRL_PERFSEL1_VALUE_SRAM1_CONTESTED _u(0x0c) +#define BUSCTRL_PERFSEL1_VALUE_SRAM1 _u(0x0d) +#define BUSCTRL_PERFSEL1_VALUE_SRAM0_CONTESTED _u(0x0e) +#define BUSCTRL_PERFSEL1_VALUE_SRAM0 _u(0x0f) #define BUSCTRL_PERFSEL1_VALUE_XIP_MAIN_CONTESTED _u(0x10) -#define BUSCTRL_PERFSEL1_VALUE_XIP_MAIN _u(0x11) -#define BUSCTRL_PERFSEL1_VALUE_ROM_CONTESTED _u(0x12) -#define BUSCTRL_PERFSEL1_VALUE_ROM _u(0x13) +#define BUSCTRL_PERFSEL1_VALUE_XIP_MAIN _u(0x11) +#define BUSCTRL_PERFSEL1_VALUE_ROM_CONTESTED _u(0x12) +#define BUSCTRL_PERFSEL1_VALUE_ROM _u(0x13) // ============================================================================= // Register : BUSCTRL_PERFCTR2 // Description : Bus fabric performance counter 2 @@ -230,32 +232,32 @@ // 0x11 -> xip_main // 0x12 -> rom_contested // 0x13 -> rom -#define BUSCTRL_PERFSEL2_OFFSET _u(0x0000001c) -#define BUSCTRL_PERFSEL2_BITS _u(0x0000001f) -#define BUSCTRL_PERFSEL2_RESET _u(0x0000001f) -#define BUSCTRL_PERFSEL2_MSB _u(4) -#define BUSCTRL_PERFSEL2_LSB _u(0) -#define BUSCTRL_PERFSEL2_ACCESS "RW" -#define BUSCTRL_PERFSEL2_VALUE_APB_CONTESTED _u(0x00) -#define BUSCTRL_PERFSEL2_VALUE_APB _u(0x01) +#define BUSCTRL_PERFSEL2_OFFSET _u(0x0000001c) +#define BUSCTRL_PERFSEL2_BITS _u(0x0000001f) +#define BUSCTRL_PERFSEL2_RESET _u(0x0000001f) +#define BUSCTRL_PERFSEL2_MSB _u(4) +#define BUSCTRL_PERFSEL2_LSB _u(0) +#define BUSCTRL_PERFSEL2_ACCESS "RW" +#define BUSCTRL_PERFSEL2_VALUE_APB_CONTESTED _u(0x00) +#define BUSCTRL_PERFSEL2_VALUE_APB _u(0x01) #define BUSCTRL_PERFSEL2_VALUE_FASTPERI_CONTESTED _u(0x02) -#define BUSCTRL_PERFSEL2_VALUE_FASTPERI _u(0x03) -#define BUSCTRL_PERFSEL2_VALUE_SRAM5_CONTESTED _u(0x04) -#define BUSCTRL_PERFSEL2_VALUE_SRAM5 _u(0x05) -#define BUSCTRL_PERFSEL2_VALUE_SRAM4_CONTESTED _u(0x06) -#define BUSCTRL_PERFSEL2_VALUE_SRAM4 _u(0x07) -#define BUSCTRL_PERFSEL2_VALUE_SRAM3_CONTESTED _u(0x08) -#define BUSCTRL_PERFSEL2_VALUE_SRAM3 _u(0x09) -#define BUSCTRL_PERFSEL2_VALUE_SRAM2_CONTESTED _u(0x0a) -#define BUSCTRL_PERFSEL2_VALUE_SRAM2 _u(0x0b) -#define BUSCTRL_PERFSEL2_VALUE_SRAM1_CONTESTED _u(0x0c) -#define BUSCTRL_PERFSEL2_VALUE_SRAM1 _u(0x0d) -#define BUSCTRL_PERFSEL2_VALUE_SRAM0_CONTESTED _u(0x0e) -#define BUSCTRL_PERFSEL2_VALUE_SRAM0 _u(0x0f) +#define BUSCTRL_PERFSEL2_VALUE_FASTPERI _u(0x03) +#define BUSCTRL_PERFSEL2_VALUE_SRAM5_CONTESTED _u(0x04) +#define BUSCTRL_PERFSEL2_VALUE_SRAM5 _u(0x05) +#define BUSCTRL_PERFSEL2_VALUE_SRAM4_CONTESTED _u(0x06) +#define BUSCTRL_PERFSEL2_VALUE_SRAM4 _u(0x07) +#define BUSCTRL_PERFSEL2_VALUE_SRAM3_CONTESTED _u(0x08) +#define BUSCTRL_PERFSEL2_VALUE_SRAM3 _u(0x09) +#define BUSCTRL_PERFSEL2_VALUE_SRAM2_CONTESTED _u(0x0a) +#define BUSCTRL_PERFSEL2_VALUE_SRAM2 _u(0x0b) +#define BUSCTRL_PERFSEL2_VALUE_SRAM1_CONTESTED _u(0x0c) +#define BUSCTRL_PERFSEL2_VALUE_SRAM1 _u(0x0d) +#define BUSCTRL_PERFSEL2_VALUE_SRAM0_CONTESTED _u(0x0e) +#define BUSCTRL_PERFSEL2_VALUE_SRAM0 _u(0x0f) #define BUSCTRL_PERFSEL2_VALUE_XIP_MAIN_CONTESTED _u(0x10) -#define BUSCTRL_PERFSEL2_VALUE_XIP_MAIN _u(0x11) -#define BUSCTRL_PERFSEL2_VALUE_ROM_CONTESTED _u(0x12) -#define BUSCTRL_PERFSEL2_VALUE_ROM _u(0x13) +#define BUSCTRL_PERFSEL2_VALUE_XIP_MAIN _u(0x11) +#define BUSCTRL_PERFSEL2_VALUE_ROM_CONTESTED _u(0x12) +#define BUSCTRL_PERFSEL2_VALUE_ROM _u(0x13) // ============================================================================= // Register : BUSCTRL_PERFCTR3 // Description : Bus fabric performance counter 3 @@ -294,31 +296,32 @@ // 0x11 -> xip_main // 0x12 -> rom_contested // 0x13 -> rom -#define BUSCTRL_PERFSEL3_OFFSET _u(0x00000024) -#define BUSCTRL_PERFSEL3_BITS _u(0x0000001f) -#define BUSCTRL_PERFSEL3_RESET _u(0x0000001f) -#define BUSCTRL_PERFSEL3_MSB _u(4) -#define BUSCTRL_PERFSEL3_LSB _u(0) -#define BUSCTRL_PERFSEL3_ACCESS "RW" -#define BUSCTRL_PERFSEL3_VALUE_APB_CONTESTED _u(0x00) -#define BUSCTRL_PERFSEL3_VALUE_APB _u(0x01) +#define BUSCTRL_PERFSEL3_OFFSET _u(0x00000024) +#define BUSCTRL_PERFSEL3_BITS _u(0x0000001f) +#define BUSCTRL_PERFSEL3_RESET _u(0x0000001f) +#define BUSCTRL_PERFSEL3_MSB _u(4) +#define BUSCTRL_PERFSEL3_LSB _u(0) +#define BUSCTRL_PERFSEL3_ACCESS "RW" +#define BUSCTRL_PERFSEL3_VALUE_APB_CONTESTED _u(0x00) +#define BUSCTRL_PERFSEL3_VALUE_APB _u(0x01) #define BUSCTRL_PERFSEL3_VALUE_FASTPERI_CONTESTED _u(0x02) -#define BUSCTRL_PERFSEL3_VALUE_FASTPERI _u(0x03) -#define BUSCTRL_PERFSEL3_VALUE_SRAM5_CONTESTED _u(0x04) -#define BUSCTRL_PERFSEL3_VALUE_SRAM5 _u(0x05) -#define BUSCTRL_PERFSEL3_VALUE_SRAM4_CONTESTED _u(0x06) -#define BUSCTRL_PERFSEL3_VALUE_SRAM4 _u(0x07) -#define BUSCTRL_PERFSEL3_VALUE_SRAM3_CONTESTED _u(0x08) -#define BUSCTRL_PERFSEL3_VALUE_SRAM3 _u(0x09) -#define BUSCTRL_PERFSEL3_VALUE_SRAM2_CONTESTED _u(0x0a) -#define BUSCTRL_PERFSEL3_VALUE_SRAM2 _u(0x0b) -#define BUSCTRL_PERFSEL3_VALUE_SRAM1_CONTESTED _u(0x0c) -#define BUSCTRL_PERFSEL3_VALUE_SRAM1 _u(0x0d) -#define BUSCTRL_PERFSEL3_VALUE_SRAM0_CONTESTED _u(0x0e) -#define BUSCTRL_PERFSEL3_VALUE_SRAM0 _u(0x0f) +#define BUSCTRL_PERFSEL3_VALUE_FASTPERI _u(0x03) +#define BUSCTRL_PERFSEL3_VALUE_SRAM5_CONTESTED _u(0x04) +#define BUSCTRL_PERFSEL3_VALUE_SRAM5 _u(0x05) +#define BUSCTRL_PERFSEL3_VALUE_SRAM4_CONTESTED _u(0x06) +#define BUSCTRL_PERFSEL3_VALUE_SRAM4 _u(0x07) +#define BUSCTRL_PERFSEL3_VALUE_SRAM3_CONTESTED _u(0x08) +#define BUSCTRL_PERFSEL3_VALUE_SRAM3 _u(0x09) +#define BUSCTRL_PERFSEL3_VALUE_SRAM2_CONTESTED _u(0x0a) +#define BUSCTRL_PERFSEL3_VALUE_SRAM2 _u(0x0b) +#define BUSCTRL_PERFSEL3_VALUE_SRAM1_CONTESTED _u(0x0c) +#define BUSCTRL_PERFSEL3_VALUE_SRAM1 _u(0x0d) +#define BUSCTRL_PERFSEL3_VALUE_SRAM0_CONTESTED _u(0x0e) +#define BUSCTRL_PERFSEL3_VALUE_SRAM0 _u(0x0f) #define BUSCTRL_PERFSEL3_VALUE_XIP_MAIN_CONTESTED _u(0x10) -#define BUSCTRL_PERFSEL3_VALUE_XIP_MAIN _u(0x11) -#define BUSCTRL_PERFSEL3_VALUE_ROM_CONTESTED _u(0x12) -#define BUSCTRL_PERFSEL3_VALUE_ROM _u(0x13) +#define BUSCTRL_PERFSEL3_VALUE_XIP_MAIN _u(0x11) +#define BUSCTRL_PERFSEL3_VALUE_ROM_CONTESTED _u(0x12) +#define BUSCTRL_PERFSEL3_VALUE_ROM _u(0x13) // ============================================================================= -#endif // HARDWARE_REGS_BUSCTRL_DEFINED +#endif // _HARDWARE_REGS_BUSCTRL_H + diff --git a/lib/rp2040/hardware/regs/clocks.h b/lib/pico-sdk/rp2040/hardware/regs/clocks.h index c0d2eaba..7c604b9b 100644 --- a/lib/rp2040/hardware/regs/clocks.h +++ b/lib/pico-sdk/rp2040/hardware/regs/clocks.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : CLOCKS // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_CLOCKS_DEFINED -#define HARDWARE_REGS_CLOCKS_DEFINED +#ifndef _HARDWARE_REGS_CLOCKS_H +#define _HARDWARE_REGS_CLOCKS_H // ============================================================================= // Register : CLOCKS_CLK_GPOUT0_CTRL // Description : Clock control, can be changed on-the-fly (except for auxsrc) @@ -75,22 +76,22 @@ // 0x8 -> clk_adc // 0x9 -> clk_rtc // 0xa -> clk_ref -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_BITS _u(0x000001e0) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_MSB _u(8) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) #define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) -#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) // ============================================================================= // Register : CLOCKS_CLK_GPOUT0_DIV // Description : Clock divisor, can be changed on-the-fly @@ -190,22 +191,22 @@ // 0x8 -> clk_adc // 0x9 -> clk_rtc // 0xa -> clk_ref -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_BITS _u(0x000001e0) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_MSB _u(8) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) #define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) -#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) // ============================================================================= // Register : CLOCKS_CLK_GPOUT1_DIV // Description : Clock divisor, can be changed on-the-fly @@ -305,22 +306,22 @@ // 0x8 -> clk_adc // 0x9 -> clk_rtc // 0xa -> clk_ref -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_BITS _u(0x000001e0) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_MSB _u(8) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) #define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) #define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x4) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) -#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) // ============================================================================= // Register : CLOCKS_CLK_GPOUT2_DIV // Description : Clock divisor, can be changed on-the-fly @@ -420,22 +421,22 @@ // 0x8 -> clk_adc // 0x9 -> clk_rtc // 0xa -> clk_ref -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_BITS _u(0x000001e0) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_MSB _u(8) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) #define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) #define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x4) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) -#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) // ============================================================================= // Register : CLOCKS_CLK_GPOUT3_DIV // Description : Clock divisor, can be changed on-the-fly @@ -483,29 +484,29 @@ // 0x0 -> clksrc_pll_usb // 0x1 -> clksrc_gpin0 // 0x2 -> clksrc_gpin1 -#define CLOCKS_CLK_REF_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_BITS _u(0x00000060) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_MSB _u(6) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_REF_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_BITS _u(0x00000060) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_MSB _u(6) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) -#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) // ----------------------------------------------------------------------------- // Field : CLOCKS_CLK_REF_CTRL_SRC -// Description : Selects the clock source glitchlessly, can be changed -// on-the-fly +// Description : Selects the clock source glitchlessly, can be changed on-the- +// fly // 0x0 -> rosc_clksrc_ph // 0x1 -> clksrc_clk_ref_aux // 0x2 -> xosc_clksrc -#define CLOCKS_CLK_REF_CTRL_SRC_RESET "-" -#define CLOCKS_CLK_REF_CTRL_SRC_BITS _u(0x00000003) -#define CLOCKS_CLK_REF_CTRL_SRC_MSB _u(1) -#define CLOCKS_CLK_REF_CTRL_SRC_LSB _u(0) -#define CLOCKS_CLK_REF_CTRL_SRC_ACCESS "RW" -#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_ROSC_CLKSRC_PH _u(0x0) +#define CLOCKS_CLK_REF_CTRL_SRC_RESET "-" +#define CLOCKS_CLK_REF_CTRL_SRC_BITS _u(0x00000003) +#define CLOCKS_CLK_REF_CTRL_SRC_MSB _u(1) +#define CLOCKS_CLK_REF_CTRL_SRC_LSB _u(0) +#define CLOCKS_CLK_REF_CTRL_SRC_ACCESS "RW" +#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_ROSC_CLKSRC_PH _u(0x0) #define CLOCKS_CLK_REF_CTRL_SRC_VALUE_CLKSRC_CLK_REF_AUX _u(0x1) -#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_XOSC_CLKSRC _u(0x2) +#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_XOSC_CLKSRC _u(0x2) // ============================================================================= // Register : CLOCKS_CLK_REF_DIV // Description : Clock divisor, can be changed on-the-fly @@ -553,29 +554,29 @@ // 0x3 -> xosc_clksrc // 0x4 -> clksrc_gpin0 // 0x5 -> clksrc_gpin1 -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_BITS _u(0x000000e0) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_MSB _u(7) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) #define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x1) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x2) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) -#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x2) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) // ----------------------------------------------------------------------------- // Field : CLOCKS_CLK_SYS_CTRL_SRC -// Description : Selects the clock source glitchlessly, can be changed -// on-the-fly +// Description : Selects the clock source glitchlessly, can be changed on-the- +// fly // 0x0 -> clk_ref // 0x1 -> clksrc_clk_sys_aux -#define CLOCKS_CLK_SYS_CTRL_SRC_RESET _u(0x0) -#define CLOCKS_CLK_SYS_CTRL_SRC_BITS _u(0x00000001) -#define CLOCKS_CLK_SYS_CTRL_SRC_MSB _u(0) -#define CLOCKS_CLK_SYS_CTRL_SRC_LSB _u(0) -#define CLOCKS_CLK_SYS_CTRL_SRC_ACCESS "RW" -#define CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLK_REF _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_SRC_RESET _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_SRC_BITS _u(0x00000001) +#define CLOCKS_CLK_SYS_CTRL_SRC_MSB _u(0) +#define CLOCKS_CLK_SYS_CTRL_SRC_LSB _u(0) +#define CLOCKS_CLK_SYS_CTRL_SRC_ACCESS "RW" +#define CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLK_REF _u(0x0) #define CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLKSRC_CLK_SYS_AUX _u(0x1) // ============================================================================= // Register : CLOCKS_CLK_SYS_DIV @@ -649,18 +650,18 @@ // 0x4 -> xosc_clksrc // 0x5 -> clksrc_gpin0 // 0x6 -> clksrc_gpin1 -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_BITS _u(0x000000e0) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_MSB _u(7) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_ACCESS "RW" -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x0) #define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) #define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x2) #define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x3) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x4) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x5) -#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x6) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x5) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x6) // ============================================================================= // Register : CLOCKS_CLK_PERI_SELECTED // Description : Indicates which SRC is currently selected by the glitchless mux @@ -725,17 +726,17 @@ // 0x3 -> xosc_clksrc // 0x4 -> clksrc_gpin0 // 0x5 -> clksrc_gpin1 -#define CLOCKS_CLK_USB_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_BITS _u(0x000000e0) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_MSB _u(7) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_USB_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) #define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) #define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) -#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) // ============================================================================= // Register : CLOCKS_CLK_USB_DIV // Description : Clock divisor, can be changed on-the-fly @@ -814,17 +815,17 @@ // 0x3 -> xosc_clksrc // 0x4 -> clksrc_gpin0 // 0x5 -> clksrc_gpin1 -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_BITS _u(0x000000e0) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_MSB _u(7) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) #define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) #define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) -#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) // ============================================================================= // Register : CLOCKS_CLK_ADC_DIV // Description : Clock divisor, can be changed on-the-fly @@ -903,17 +904,17 @@ // 0x3 -> xosc_clksrc // 0x4 -> clksrc_gpin0 // 0x5 -> clksrc_gpin1 -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_RESET _u(0x0) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_BITS _u(0x000000e0) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_MSB _u(7) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_LSB _u(5) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_ACCESS "RW" #define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) #define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) #define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) -#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) // ============================================================================= // Register : CLOCKS_CLK_RTC_DIV // Description : Clock divisor, can be changed on-the-fly @@ -951,7 +952,6 @@ #define CLOCKS_CLK_RTC_SELECTED_ACCESS "RO" // ============================================================================= // Register : CLOCKS_CLK_SYS_RESUS_CTRL -// Description : None #define CLOCKS_CLK_SYS_RESUS_CTRL_OFFSET _u(0x00000078) #define CLOCKS_CLK_SYS_RESUS_CTRL_BITS _u(0x000111ff) #define CLOCKS_CLK_SYS_RESUS_CTRL_RESET _u(0x000000ff) @@ -991,7 +991,6 @@ #define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_ACCESS "RW" // ============================================================================= // Register : CLOCKS_CLK_SYS_RESUS_STATUS -// Description : None #define CLOCKS_CLK_SYS_RESUS_STATUS_OFFSET _u(0x0000007c) #define CLOCKS_CLK_SYS_RESUS_STATUS_BITS _u(0x00000001) #define CLOCKS_CLK_SYS_RESUS_STATUS_RESET _u(0x00000000) @@ -1073,26 +1072,26 @@ // 0x0b -> clk_usb // 0x0c -> clk_adc // 0x0d -> clk_rtc -#define CLOCKS_FC0_SRC_OFFSET _u(0x00000094) -#define CLOCKS_FC0_SRC_BITS _u(0x000000ff) -#define CLOCKS_FC0_SRC_RESET _u(0x00000000) -#define CLOCKS_FC0_SRC_MSB _u(7) -#define CLOCKS_FC0_SRC_LSB _u(0) -#define CLOCKS_FC0_SRC_ACCESS "RW" -#define CLOCKS_FC0_SRC_VALUE_NULL _u(0x00) +#define CLOCKS_FC0_SRC_OFFSET _u(0x00000094) +#define CLOCKS_FC0_SRC_BITS _u(0x000000ff) +#define CLOCKS_FC0_SRC_RESET _u(0x00000000) +#define CLOCKS_FC0_SRC_MSB _u(7) +#define CLOCKS_FC0_SRC_LSB _u(0) +#define CLOCKS_FC0_SRC_ACCESS "RW" +#define CLOCKS_FC0_SRC_VALUE_NULL _u(0x00) #define CLOCKS_FC0_SRC_VALUE_PLL_SYS_CLKSRC_PRIMARY _u(0x01) #define CLOCKS_FC0_SRC_VALUE_PLL_USB_CLKSRC_PRIMARY _u(0x02) -#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC _u(0x03) -#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC_PH _u(0x04) -#define CLOCKS_FC0_SRC_VALUE_XOSC_CLKSRC _u(0x05) -#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN0 _u(0x06) -#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN1 _u(0x07) -#define CLOCKS_FC0_SRC_VALUE_CLK_REF _u(0x08) -#define CLOCKS_FC0_SRC_VALUE_CLK_SYS _u(0x09) -#define CLOCKS_FC0_SRC_VALUE_CLK_PERI _u(0x0a) -#define CLOCKS_FC0_SRC_VALUE_CLK_USB _u(0x0b) -#define CLOCKS_FC0_SRC_VALUE_CLK_ADC _u(0x0c) -#define CLOCKS_FC0_SRC_VALUE_CLK_RTC _u(0x0d) +#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC _u(0x03) +#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC_PH _u(0x04) +#define CLOCKS_FC0_SRC_VALUE_XOSC_CLKSRC _u(0x05) +#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN0 _u(0x06) +#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN1 _u(0x07) +#define CLOCKS_FC0_SRC_VALUE_CLK_REF _u(0x08) +#define CLOCKS_FC0_SRC_VALUE_CLK_SYS _u(0x09) +#define CLOCKS_FC0_SRC_VALUE_CLK_PERI _u(0x0a) +#define CLOCKS_FC0_SRC_VALUE_CLK_USB _u(0x0b) +#define CLOCKS_FC0_SRC_VALUE_CLK_ADC _u(0x0c) +#define CLOCKS_FC0_SRC_VALUE_CLK_RTC _u(0x0d) // ============================================================================= // Register : CLOCKS_FC0_STATUS // Description : Frequency counter status @@ -1171,7 +1170,6 @@ #define CLOCKS_FC0_RESULT_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_FC0_RESULT_KHZ -// Description : None #define CLOCKS_FC0_RESULT_KHZ_RESET _u(0x0000000) #define CLOCKS_FC0_RESULT_KHZ_BITS _u(0x3fffffe0) #define CLOCKS_FC0_RESULT_KHZ_MSB _u(29) @@ -1179,7 +1177,6 @@ #define CLOCKS_FC0_RESULT_KHZ_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_FC0_RESULT_FRAC -// Description : None #define CLOCKS_FC0_RESULT_FRAC_RESET _u(0x00) #define CLOCKS_FC0_RESULT_FRAC_BITS _u(0x0000001f) #define CLOCKS_FC0_RESULT_FRAC_MSB _u(4) @@ -1193,7 +1190,6 @@ #define CLOCKS_WAKE_EN0_RESET _u(0xffffffff) // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM3 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_BITS _u(0x80000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_MSB _u(31) @@ -1201,7 +1197,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM2 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_BITS _u(0x40000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_MSB _u(30) @@ -1209,7 +1204,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM1 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_BITS _u(0x20000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_MSB _u(29) @@ -1217,7 +1211,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM0 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_BITS _u(0x10000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_MSB _u(28) @@ -1225,7 +1218,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SPI1 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_BITS _u(0x08000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_MSB _u(27) @@ -1233,7 +1225,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_PERI_SPI1 -// Description : None #define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_BITS _u(0x04000000) #define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_MSB _u(26) @@ -1241,7 +1232,6 @@ #define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SPI0 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_BITS _u(0x02000000) #define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_MSB _u(25) @@ -1249,7 +1239,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_PERI_SPI0 -// Description : None #define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_BITS _u(0x01000000) #define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_MSB _u(24) @@ -1257,7 +1246,6 @@ #define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_SIO -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_SIO_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_SIO_BITS _u(0x00800000) #define CLOCKS_WAKE_EN0_CLK_SYS_SIO_MSB _u(23) @@ -1265,7 +1253,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_SIO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_RTC -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_RTC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_RTC_BITS _u(0x00400000) #define CLOCKS_WAKE_EN0_CLK_SYS_RTC_MSB _u(22) @@ -1273,7 +1260,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_RTC_RTC -// Description : None #define CLOCKS_WAKE_EN0_CLK_RTC_RTC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_RTC_RTC_BITS _u(0x00200000) #define CLOCKS_WAKE_EN0_CLK_RTC_RTC_MSB _u(21) @@ -1281,7 +1267,6 @@ #define CLOCKS_WAKE_EN0_CLK_RTC_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_ROSC -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_BITS _u(0x00100000) #define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_MSB _u(20) @@ -1289,7 +1274,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_ROM -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_ROM_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_ROM_BITS _u(0x00080000) #define CLOCKS_WAKE_EN0_CLK_SYS_ROM_MSB _u(19) @@ -1297,7 +1281,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_RESETS -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_BITS _u(0x00040000) #define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_MSB _u(18) @@ -1305,7 +1288,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PWM -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PWM_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PWM_BITS _u(0x00020000) #define CLOCKS_WAKE_EN0_CLK_SYS_PWM_MSB _u(17) @@ -1313,7 +1295,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PWM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PSM -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PSM_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PSM_BITS _u(0x00010000) #define CLOCKS_WAKE_EN0_CLK_SYS_PSM_MSB _u(16) @@ -1321,7 +1302,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PSM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_BITS _u(0x00008000) #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_MSB _u(15) @@ -1329,7 +1309,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_MSB _u(14) @@ -1337,7 +1316,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PIO1 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_BITS _u(0x00002000) #define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_MSB _u(13) @@ -1345,7 +1323,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PIO0 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_BITS _u(0x00001000) #define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_MSB _u(12) @@ -1353,7 +1330,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_PADS -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_PADS_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_PADS_BITS _u(0x00000800) #define CLOCKS_WAKE_EN0_CLK_SYS_PADS_MSB _u(11) @@ -1361,7 +1337,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_PADS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) #define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) @@ -1369,7 +1344,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_JTAG -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_BITS _u(0x00000200) #define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_MSB _u(9) @@ -1377,7 +1351,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_IO -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_IO_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_IO_BITS _u(0x00000100) #define CLOCKS_WAKE_EN0_CLK_SYS_IO_MSB _u(8) @@ -1385,7 +1358,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_IO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_I2C1 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_BITS _u(0x00000080) #define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_MSB _u(7) @@ -1393,7 +1365,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_I2C0 -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_BITS _u(0x00000040) #define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_MSB _u(6) @@ -1401,7 +1372,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_DMA -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_DMA_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_DMA_BITS _u(0x00000020) #define CLOCKS_WAKE_EN0_CLK_SYS_DMA_MSB _u(5) @@ -1409,7 +1379,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_DMA_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) #define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_MSB _u(4) @@ -1417,7 +1386,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) #define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_MSB _u(3) @@ -1425,7 +1393,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_ADC -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_ADC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_ADC_BITS _u(0x00000004) #define CLOCKS_WAKE_EN0_CLK_SYS_ADC_MSB _u(2) @@ -1433,7 +1400,6 @@ #define CLOCKS_WAKE_EN0_CLK_SYS_ADC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_ADC_ADC -// Description : None #define CLOCKS_WAKE_EN0_CLK_ADC_ADC_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_ADC_ADC_BITS _u(0x00000002) #define CLOCKS_WAKE_EN0_CLK_ADC_ADC_MSB _u(1) @@ -1441,7 +1407,6 @@ #define CLOCKS_WAKE_EN0_CLK_ADC_ADC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS -// Description : None #define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_RESET _u(0x1) #define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_BITS _u(0x00000001) #define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_MSB _u(0) @@ -1455,7 +1420,6 @@ #define CLOCKS_WAKE_EN1_RESET _u(0x00007fff) // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_XOSC -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_BITS _u(0x00004000) #define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_MSB _u(14) @@ -1463,7 +1427,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_XIP -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_XIP_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_XIP_BITS _u(0x00002000) #define CLOCKS_WAKE_EN1_CLK_SYS_XIP_MSB _u(13) @@ -1471,7 +1434,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_XIP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) #define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_MSB _u(12) @@ -1479,7 +1441,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_USB_USBCTRL -// Description : None #define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_BITS _u(0x00000800) #define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_MSB _u(11) @@ -1487,7 +1448,6 @@ #define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_BITS _u(0x00000400) #define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_MSB _u(10) @@ -1495,7 +1455,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_UART1 -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_UART1_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_UART1_BITS _u(0x00000200) #define CLOCKS_WAKE_EN1_CLK_SYS_UART1_MSB _u(9) @@ -1503,7 +1462,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_PERI_UART1 -// Description : None #define CLOCKS_WAKE_EN1_CLK_PERI_UART1_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_PERI_UART1_BITS _u(0x00000100) #define CLOCKS_WAKE_EN1_CLK_PERI_UART1_MSB _u(8) @@ -1511,7 +1469,6 @@ #define CLOCKS_WAKE_EN1_CLK_PERI_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_UART0 -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_UART0_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_UART0_BITS _u(0x00000080) #define CLOCKS_WAKE_EN1_CLK_SYS_UART0_MSB _u(7) @@ -1519,7 +1476,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_PERI_UART0 -// Description : None #define CLOCKS_WAKE_EN1_CLK_PERI_UART0_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_PERI_UART0_BITS _u(0x00000040) #define CLOCKS_WAKE_EN1_CLK_PERI_UART0_MSB _u(6) @@ -1527,7 +1483,6 @@ #define CLOCKS_WAKE_EN1_CLK_PERI_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_TIMER -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_BITS _u(0x00000020) #define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_MSB _u(5) @@ -1535,7 +1490,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_TBMAN -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_BITS _u(0x00000010) #define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_MSB _u(4) @@ -1543,7 +1497,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_BITS _u(0x00000008) #define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_MSB _u(3) @@ -1551,7 +1504,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_BITS _u(0x00000004) #define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_MSB _u(2) @@ -1559,7 +1511,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_SRAM5 -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_BITS _u(0x00000002) #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_MSB _u(1) @@ -1567,7 +1518,6 @@ #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_WAKE_EN1_CLK_SYS_SRAM4 -// Description : None #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_RESET _u(0x1) #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_BITS _u(0x00000001) #define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_MSB _u(0) @@ -1581,7 +1531,6 @@ #define CLOCKS_SLEEP_EN0_RESET _u(0xffffffff) // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_BITS _u(0x80000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_MSB _u(31) @@ -1589,7 +1538,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_BITS _u(0x40000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_MSB _u(30) @@ -1597,7 +1545,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_BITS _u(0x20000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_MSB _u(29) @@ -1605,7 +1552,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_BITS _u(0x10000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_MSB _u(28) @@ -1613,7 +1559,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SPI1 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_BITS _u(0x08000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_MSB _u(27) @@ -1621,7 +1566,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_PERI_SPI1 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_BITS _u(0x04000000) #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_MSB _u(26) @@ -1629,7 +1573,6 @@ #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SPI0 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_BITS _u(0x02000000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_MSB _u(25) @@ -1637,7 +1580,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_PERI_SPI0 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_BITS _u(0x01000000) #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_MSB _u(24) @@ -1645,7 +1587,6 @@ #define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_SIO -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_BITS _u(0x00800000) #define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_MSB _u(23) @@ -1653,7 +1594,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_RTC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_BITS _u(0x00400000) #define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_MSB _u(22) @@ -1661,7 +1601,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_RTC_RTC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_BITS _u(0x00200000) #define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_MSB _u(21) @@ -1669,7 +1608,6 @@ #define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_ROSC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_BITS _u(0x00100000) #define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_MSB _u(20) @@ -1677,7 +1615,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_ROM -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_BITS _u(0x00080000) #define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_MSB _u(19) @@ -1685,7 +1622,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_RESETS -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_BITS _u(0x00040000) #define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_MSB _u(18) @@ -1693,7 +1629,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PWM -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_BITS _u(0x00020000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_MSB _u(17) @@ -1701,7 +1636,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PSM -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_BITS _u(0x00010000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_MSB _u(16) @@ -1709,7 +1643,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_BITS _u(0x00008000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_MSB _u(15) @@ -1717,7 +1650,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_MSB _u(14) @@ -1725,7 +1657,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PIO1 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_BITS _u(0x00002000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_MSB _u(13) @@ -1733,7 +1664,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PIO0 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_BITS _u(0x00001000) #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_MSB _u(12) @@ -1741,7 +1671,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_PADS -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_BITS _u(0x00000800) #define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_MSB _u(11) @@ -1749,7 +1678,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) #define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) @@ -1757,7 +1685,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_JTAG -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_BITS _u(0x00000200) #define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_MSB _u(9) @@ -1765,7 +1692,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_IO -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_IO_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_IO_BITS _u(0x00000100) #define CLOCKS_SLEEP_EN0_CLK_SYS_IO_MSB _u(8) @@ -1773,7 +1699,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_IO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_I2C1 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_BITS _u(0x00000080) #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_MSB _u(7) @@ -1781,7 +1706,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_I2C0 -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_BITS _u(0x00000040) #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_MSB _u(6) @@ -1789,7 +1713,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_DMA -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_BITS _u(0x00000020) #define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_MSB _u(5) @@ -1797,7 +1720,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_MSB _u(4) @@ -1805,7 +1727,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_MSB _u(3) @@ -1813,7 +1734,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_ADC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_BITS _u(0x00000004) #define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_MSB _u(2) @@ -1821,7 +1741,6 @@ #define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_ADC_ADC -// Description : None #define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_BITS _u(0x00000002) #define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_MSB _u(1) @@ -1829,7 +1748,6 @@ #define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS -// Description : None #define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_RESET _u(0x1) #define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_BITS _u(0x00000001) #define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_MSB _u(0) @@ -1843,7 +1761,6 @@ #define CLOCKS_SLEEP_EN1_RESET _u(0x00007fff) // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_XOSC -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_BITS _u(0x00004000) #define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_MSB _u(14) @@ -1851,7 +1768,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_XIP -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_BITS _u(0x00002000) #define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_MSB _u(13) @@ -1859,7 +1775,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) #define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_MSB _u(12) @@ -1867,7 +1782,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL -// Description : None #define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_BITS _u(0x00000800) #define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_MSB _u(11) @@ -1875,7 +1789,6 @@ #define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_BITS _u(0x00000400) #define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_MSB _u(10) @@ -1883,7 +1796,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_UART1 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_BITS _u(0x00000200) #define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_MSB _u(9) @@ -1891,7 +1803,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_PERI_UART1 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_BITS _u(0x00000100) #define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_MSB _u(8) @@ -1899,7 +1810,6 @@ #define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_UART0 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_BITS _u(0x00000080) #define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_MSB _u(7) @@ -1907,7 +1817,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_PERI_UART0 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_BITS _u(0x00000040) #define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_MSB _u(6) @@ -1915,7 +1824,6 @@ #define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_TIMER -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_BITS _u(0x00000020) #define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_MSB _u(5) @@ -1923,7 +1831,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_BITS _u(0x00000010) #define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_MSB _u(4) @@ -1931,7 +1838,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_BITS _u(0x00000008) #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_MSB _u(3) @@ -1939,7 +1845,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_BITS _u(0x00000004) #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_MSB _u(2) @@ -1947,7 +1852,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_BITS _u(0x00000002) #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_MSB _u(1) @@ -1955,7 +1859,6 @@ #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4 -// Description : None #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_RESET _u(0x1) #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_BITS _u(0x00000001) #define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_MSB _u(0) @@ -1969,7 +1872,6 @@ #define CLOCKS_ENABLED0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SRAM3 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SRAM3_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SRAM3_BITS _u(0x80000000) #define CLOCKS_ENABLED0_CLK_SYS_SRAM3_MSB _u(31) @@ -1977,7 +1879,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SRAM3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SRAM2 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SRAM2_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SRAM2_BITS _u(0x40000000) #define CLOCKS_ENABLED0_CLK_SYS_SRAM2_MSB _u(30) @@ -1985,7 +1886,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SRAM2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SRAM1 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SRAM1_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SRAM1_BITS _u(0x20000000) #define CLOCKS_ENABLED0_CLK_SYS_SRAM1_MSB _u(29) @@ -1993,7 +1893,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SRAM1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SRAM0 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SRAM0_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SRAM0_BITS _u(0x10000000) #define CLOCKS_ENABLED0_CLK_SYS_SRAM0_MSB _u(28) @@ -2001,7 +1900,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SRAM0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SPI1 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SPI1_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SPI1_BITS _u(0x08000000) #define CLOCKS_ENABLED0_CLK_SYS_SPI1_MSB _u(27) @@ -2009,7 +1907,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SPI1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_PERI_SPI1 -// Description : None #define CLOCKS_ENABLED0_CLK_PERI_SPI1_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_PERI_SPI1_BITS _u(0x04000000) #define CLOCKS_ENABLED0_CLK_PERI_SPI1_MSB _u(26) @@ -2017,7 +1914,6 @@ #define CLOCKS_ENABLED0_CLK_PERI_SPI1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SPI0 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SPI0_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SPI0_BITS _u(0x02000000) #define CLOCKS_ENABLED0_CLK_SYS_SPI0_MSB _u(25) @@ -2025,7 +1921,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SPI0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_PERI_SPI0 -// Description : None #define CLOCKS_ENABLED0_CLK_PERI_SPI0_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_PERI_SPI0_BITS _u(0x01000000) #define CLOCKS_ENABLED0_CLK_PERI_SPI0_MSB _u(24) @@ -2033,7 +1928,6 @@ #define CLOCKS_ENABLED0_CLK_PERI_SPI0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_SIO -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_SIO_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_SIO_BITS _u(0x00800000) #define CLOCKS_ENABLED0_CLK_SYS_SIO_MSB _u(23) @@ -2041,7 +1935,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_SIO_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_RTC -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_RTC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_RTC_BITS _u(0x00400000) #define CLOCKS_ENABLED0_CLK_SYS_RTC_MSB _u(22) @@ -2049,7 +1942,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_RTC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_RTC_RTC -// Description : None #define CLOCKS_ENABLED0_CLK_RTC_RTC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_RTC_RTC_BITS _u(0x00200000) #define CLOCKS_ENABLED0_CLK_RTC_RTC_MSB _u(21) @@ -2057,7 +1949,6 @@ #define CLOCKS_ENABLED0_CLK_RTC_RTC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_ROSC -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_ROSC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_ROSC_BITS _u(0x00100000) #define CLOCKS_ENABLED0_CLK_SYS_ROSC_MSB _u(20) @@ -2065,7 +1956,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_ROSC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_ROM -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_ROM_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_ROM_BITS _u(0x00080000) #define CLOCKS_ENABLED0_CLK_SYS_ROM_MSB _u(19) @@ -2073,7 +1963,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_ROM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_RESETS -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_RESETS_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_RESETS_BITS _u(0x00040000) #define CLOCKS_ENABLED0_CLK_SYS_RESETS_MSB _u(18) @@ -2081,7 +1970,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_RESETS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PWM -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PWM_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PWM_BITS _u(0x00020000) #define CLOCKS_ENABLED0_CLK_SYS_PWM_MSB _u(17) @@ -2089,7 +1977,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PWM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PSM -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PSM_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PSM_BITS _u(0x00010000) #define CLOCKS_ENABLED0_CLK_SYS_PSM_MSB _u(16) @@ -2097,7 +1984,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PSM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PLL_USB -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_BITS _u(0x00008000) #define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_MSB _u(15) @@ -2105,7 +1991,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PLL_SYS -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) #define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_MSB _u(14) @@ -2113,7 +1998,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PIO1 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PIO1_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PIO1_BITS _u(0x00002000) #define CLOCKS_ENABLED0_CLK_SYS_PIO1_MSB _u(13) @@ -2121,7 +2005,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PIO1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PIO0 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PIO0_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PIO0_BITS _u(0x00001000) #define CLOCKS_ENABLED0_CLK_SYS_PIO0_MSB _u(12) @@ -2129,7 +2012,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PIO0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_PADS -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_PADS_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_PADS_BITS _u(0x00000800) #define CLOCKS_ENABLED0_CLK_SYS_PADS_MSB _u(11) @@ -2137,7 +2019,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_PADS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) #define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) @@ -2145,7 +2026,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_JTAG -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_JTAG_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_JTAG_BITS _u(0x00000200) #define CLOCKS_ENABLED0_CLK_SYS_JTAG_MSB _u(9) @@ -2153,7 +2033,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_JTAG_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_IO -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_IO_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_IO_BITS _u(0x00000100) #define CLOCKS_ENABLED0_CLK_SYS_IO_MSB _u(8) @@ -2161,7 +2040,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_IO_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_I2C1 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_I2C1_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_I2C1_BITS _u(0x00000080) #define CLOCKS_ENABLED0_CLK_SYS_I2C1_MSB _u(7) @@ -2169,7 +2047,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_I2C1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_I2C0 -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_I2C0_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_I2C0_BITS _u(0x00000040) #define CLOCKS_ENABLED0_CLK_SYS_I2C0_MSB _u(6) @@ -2177,7 +2054,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_I2C0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_DMA -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_DMA_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_DMA_BITS _u(0x00000020) #define CLOCKS_ENABLED0_CLK_SYS_DMA_MSB _u(5) @@ -2185,7 +2061,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_DMA_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) #define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_MSB _u(4) @@ -2193,7 +2068,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_BUSCTRL -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) #define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_MSB _u(3) @@ -2201,7 +2075,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_ADC -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_ADC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_ADC_BITS _u(0x00000004) #define CLOCKS_ENABLED0_CLK_SYS_ADC_MSB _u(2) @@ -2209,7 +2082,6 @@ #define CLOCKS_ENABLED0_CLK_SYS_ADC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_ADC_ADC -// Description : None #define CLOCKS_ENABLED0_CLK_ADC_ADC_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_ADC_ADC_BITS _u(0x00000002) #define CLOCKS_ENABLED0_CLK_ADC_ADC_MSB _u(1) @@ -2217,7 +2089,6 @@ #define CLOCKS_ENABLED0_CLK_ADC_ADC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED0_CLK_SYS_CLOCKS -// Description : None #define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_RESET _u(0x0) #define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_BITS _u(0x00000001) #define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_MSB _u(0) @@ -2231,7 +2102,6 @@ #define CLOCKS_ENABLED1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_XOSC -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_XOSC_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_XOSC_BITS _u(0x00004000) #define CLOCKS_ENABLED1_CLK_SYS_XOSC_MSB _u(14) @@ -2239,7 +2109,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_XOSC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_XIP -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_XIP_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_XIP_BITS _u(0x00002000) #define CLOCKS_ENABLED1_CLK_SYS_XIP_MSB _u(13) @@ -2247,7 +2116,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_XIP_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_WATCHDOG -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) #define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_MSB _u(12) @@ -2255,7 +2123,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_USB_USBCTRL -// Description : None #define CLOCKS_ENABLED1_CLK_USB_USBCTRL_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_USB_USBCTRL_BITS _u(0x00000800) #define CLOCKS_ENABLED1_CLK_USB_USBCTRL_MSB _u(11) @@ -2263,7 +2130,6 @@ #define CLOCKS_ENABLED1_CLK_USB_USBCTRL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_USBCTRL -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_BITS _u(0x00000400) #define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_MSB _u(10) @@ -2271,7 +2137,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_UART1 -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_UART1_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_UART1_BITS _u(0x00000200) #define CLOCKS_ENABLED1_CLK_SYS_UART1_MSB _u(9) @@ -2279,7 +2144,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_UART1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_PERI_UART1 -// Description : None #define CLOCKS_ENABLED1_CLK_PERI_UART1_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_PERI_UART1_BITS _u(0x00000100) #define CLOCKS_ENABLED1_CLK_PERI_UART1_MSB _u(8) @@ -2287,7 +2151,6 @@ #define CLOCKS_ENABLED1_CLK_PERI_UART1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_UART0 -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_UART0_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_UART0_BITS _u(0x00000080) #define CLOCKS_ENABLED1_CLK_SYS_UART0_MSB _u(7) @@ -2295,7 +2158,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_UART0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_PERI_UART0 -// Description : None #define CLOCKS_ENABLED1_CLK_PERI_UART0_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_PERI_UART0_BITS _u(0x00000040) #define CLOCKS_ENABLED1_CLK_PERI_UART0_MSB _u(6) @@ -2303,7 +2165,6 @@ #define CLOCKS_ENABLED1_CLK_PERI_UART0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_TIMER -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_TIMER_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_TIMER_BITS _u(0x00000020) #define CLOCKS_ENABLED1_CLK_SYS_TIMER_MSB _u(5) @@ -2311,7 +2172,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_TIMER_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_TBMAN -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_TBMAN_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_TBMAN_BITS _u(0x00000010) #define CLOCKS_ENABLED1_CLK_SYS_TBMAN_MSB _u(4) @@ -2319,7 +2179,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_TBMAN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_SYSINFO -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_BITS _u(0x00000008) #define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_MSB _u(3) @@ -2327,7 +2186,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_SYSCFG -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_BITS _u(0x00000004) #define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_MSB _u(2) @@ -2335,7 +2193,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_SRAM5 -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_SRAM5_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_SRAM5_BITS _u(0x00000002) #define CLOCKS_ENABLED1_CLK_SYS_SRAM5_MSB _u(1) @@ -2343,7 +2200,6 @@ #define CLOCKS_ENABLED1_CLK_SYS_SRAM5_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : CLOCKS_ENABLED1_CLK_SYS_SRAM4 -// Description : None #define CLOCKS_ENABLED1_CLK_SYS_SRAM4_RESET _u(0x0) #define CLOCKS_ENABLED1_CLK_SYS_SRAM4_BITS _u(0x00000001) #define CLOCKS_ENABLED1_CLK_SYS_SRAM4_MSB _u(0) @@ -2357,7 +2213,6 @@ #define CLOCKS_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_INTR_CLK_SYS_RESUS -// Description : None #define CLOCKS_INTR_CLK_SYS_RESUS_RESET _u(0x0) #define CLOCKS_INTR_CLK_SYS_RESUS_BITS _u(0x00000001) #define CLOCKS_INTR_CLK_SYS_RESUS_MSB _u(0) @@ -2371,7 +2226,6 @@ #define CLOCKS_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_INTE_CLK_SYS_RESUS -// Description : None #define CLOCKS_INTE_CLK_SYS_RESUS_RESET _u(0x0) #define CLOCKS_INTE_CLK_SYS_RESUS_BITS _u(0x00000001) #define CLOCKS_INTE_CLK_SYS_RESUS_MSB _u(0) @@ -2385,7 +2239,6 @@ #define CLOCKS_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_INTF_CLK_SYS_RESUS -// Description : None #define CLOCKS_INTF_CLK_SYS_RESUS_RESET _u(0x0) #define CLOCKS_INTF_CLK_SYS_RESUS_BITS _u(0x00000001) #define CLOCKS_INTF_CLK_SYS_RESUS_MSB _u(0) @@ -2399,11 +2252,11 @@ #define CLOCKS_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : CLOCKS_INTS_CLK_SYS_RESUS -// Description : None #define CLOCKS_INTS_CLK_SYS_RESUS_RESET _u(0x0) #define CLOCKS_INTS_CLK_SYS_RESUS_BITS _u(0x00000001) #define CLOCKS_INTS_CLK_SYS_RESUS_MSB _u(0) #define CLOCKS_INTS_CLK_SYS_RESUS_LSB _u(0) #define CLOCKS_INTS_CLK_SYS_RESUS_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_CLOCKS_DEFINED +#endif // _HARDWARE_REGS_CLOCKS_H + diff --git a/lib/rp2040/hardware/regs/dma.h b/lib/pico-sdk/rp2040/hardware/regs/dma.h index 49938ba9..62a37ec0 100644 --- a/lib/rp2040/hardware/regs/dma.h +++ b/lib/pico-sdk/rp2040/hardware/regs/dma.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : DMA with separate read and write masters // ============================================================================= -#ifndef HARDWARE_REGS_DMA_DEFINED -#define HARDWARE_REGS_DMA_DEFINED +#ifndef _HARDWARE_REGS_DMA_H +#define _HARDWARE_REGS_DMA_H // ============================================================================= // Register : DMA_CH0_READ_ADDR // Description : DMA Channel 0 Read Address pointer @@ -84,7 +86,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH0_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH0_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -96,8 +98,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH0_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH0_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH0_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -124,8 +126,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH0_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH0_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH0_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -168,22 +170,21 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH0_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH0_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (0). #define DMA_CH0_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH0_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH0_CTRL_TRIG_CHAIN_TO_MSB _u(14) @@ -210,11 +211,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH0_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH0_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH0_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH0_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH0_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH0_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH0_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH0_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH0_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH0_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH0_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH0_CTRL_TRIG_INCR_WRITE @@ -248,14 +249,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH0_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH0_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH0_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH0_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -294,7 +295,7 @@ #define DMA_CH0_AL1_CTRL_RESET "-" #define DMA_CH0_AL1_CTRL_MSB _u(31) #define DMA_CH0_AL1_CTRL_LSB _u(0) -#define DMA_CH0_AL1_CTRL_ACCESS "RO" +#define DMA_CH0_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL1_READ_ADDR // Description : Alias for channel 0 READ_ADDR register @@ -303,7 +304,7 @@ #define DMA_CH0_AL1_READ_ADDR_RESET "-" #define DMA_CH0_AL1_READ_ADDR_MSB _u(31) #define DMA_CH0_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH0_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH0_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL1_WRITE_ADDR // Description : Alias for channel 0 WRITE_ADDR register @@ -312,7 +313,7 @@ #define DMA_CH0_AL1_WRITE_ADDR_RESET "-" #define DMA_CH0_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH0_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH0_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH0_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 0 TRANS_COUNT register @@ -323,7 +324,7 @@ #define DMA_CH0_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH0_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH0_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH0_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH0_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL2_CTRL // Description : Alias for channel 0 CTRL register @@ -332,7 +333,7 @@ #define DMA_CH0_AL2_CTRL_RESET "-" #define DMA_CH0_AL2_CTRL_MSB _u(31) #define DMA_CH0_AL2_CTRL_LSB _u(0) -#define DMA_CH0_AL2_CTRL_ACCESS "RO" +#define DMA_CH0_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL2_TRANS_COUNT // Description : Alias for channel 0 TRANS_COUNT register @@ -341,7 +342,7 @@ #define DMA_CH0_AL2_TRANS_COUNT_RESET "-" #define DMA_CH0_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH0_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH0_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH0_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL2_READ_ADDR // Description : Alias for channel 0 READ_ADDR register @@ -350,7 +351,7 @@ #define DMA_CH0_AL2_READ_ADDR_RESET "-" #define DMA_CH0_AL2_READ_ADDR_MSB _u(31) #define DMA_CH0_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH0_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH0_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 0 WRITE_ADDR register @@ -361,7 +362,7 @@ #define DMA_CH0_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH0_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH0_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH0_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH0_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL3_CTRL // Description : Alias for channel 0 CTRL register @@ -370,7 +371,7 @@ #define DMA_CH0_AL3_CTRL_RESET "-" #define DMA_CH0_AL3_CTRL_MSB _u(31) #define DMA_CH0_AL3_CTRL_LSB _u(0) -#define DMA_CH0_AL3_CTRL_ACCESS "RO" +#define DMA_CH0_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL3_WRITE_ADDR // Description : Alias for channel 0 WRITE_ADDR register @@ -379,7 +380,7 @@ #define DMA_CH0_AL3_WRITE_ADDR_RESET "-" #define DMA_CH0_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH0_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH0_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH0_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL3_TRANS_COUNT // Description : Alias for channel 0 TRANS_COUNT register @@ -388,7 +389,7 @@ #define DMA_CH0_AL3_TRANS_COUNT_RESET "-" #define DMA_CH0_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH0_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH0_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH0_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH0_AL3_READ_ADDR_TRIG // Description : Alias for channel 0 READ_ADDR register @@ -399,7 +400,7 @@ #define DMA_CH0_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH0_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH0_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH0_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH0_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_READ_ADDR // Description : DMA Channel 1 Read Address pointer @@ -457,7 +458,7 @@ // Description : DMA Channel 1 Control and Status #define DMA_CH1_CTRL_TRIG_OFFSET _u(0x0000004c) #define DMA_CH1_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH1_CTRL_TRIG_RESET _u(0x00000800) +#define DMA_CH1_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH1_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -473,7 +474,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH1_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH1_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -485,8 +486,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH1_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH1_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH1_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -513,8 +514,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH1_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH1_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH1_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -557,23 +558,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH1_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH1_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (1). -#define DMA_CH1_CTRL_TRIG_CHAIN_TO_RESET _u(0x1) +#define DMA_CH1_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH1_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH1_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH1_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -599,11 +599,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH1_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH1_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH1_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH1_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH1_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH1_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH1_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH1_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH1_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH1_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH1_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH1_CTRL_TRIG_INCR_WRITE @@ -637,14 +637,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH1_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH1_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH1_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH1_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -683,7 +683,7 @@ #define DMA_CH1_AL1_CTRL_RESET "-" #define DMA_CH1_AL1_CTRL_MSB _u(31) #define DMA_CH1_AL1_CTRL_LSB _u(0) -#define DMA_CH1_AL1_CTRL_ACCESS "RO" +#define DMA_CH1_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL1_READ_ADDR // Description : Alias for channel 1 READ_ADDR register @@ -692,7 +692,7 @@ #define DMA_CH1_AL1_READ_ADDR_RESET "-" #define DMA_CH1_AL1_READ_ADDR_MSB _u(31) #define DMA_CH1_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH1_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH1_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL1_WRITE_ADDR // Description : Alias for channel 1 WRITE_ADDR register @@ -701,7 +701,7 @@ #define DMA_CH1_AL1_WRITE_ADDR_RESET "-" #define DMA_CH1_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH1_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH1_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH1_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 1 TRANS_COUNT register @@ -712,7 +712,7 @@ #define DMA_CH1_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH1_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH1_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH1_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH1_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL2_CTRL // Description : Alias for channel 1 CTRL register @@ -721,7 +721,7 @@ #define DMA_CH1_AL2_CTRL_RESET "-" #define DMA_CH1_AL2_CTRL_MSB _u(31) #define DMA_CH1_AL2_CTRL_LSB _u(0) -#define DMA_CH1_AL2_CTRL_ACCESS "RO" +#define DMA_CH1_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL2_TRANS_COUNT // Description : Alias for channel 1 TRANS_COUNT register @@ -730,7 +730,7 @@ #define DMA_CH1_AL2_TRANS_COUNT_RESET "-" #define DMA_CH1_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH1_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH1_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH1_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL2_READ_ADDR // Description : Alias for channel 1 READ_ADDR register @@ -739,7 +739,7 @@ #define DMA_CH1_AL2_READ_ADDR_RESET "-" #define DMA_CH1_AL2_READ_ADDR_MSB _u(31) #define DMA_CH1_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH1_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH1_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 1 WRITE_ADDR register @@ -750,7 +750,7 @@ #define DMA_CH1_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH1_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH1_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH1_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH1_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL3_CTRL // Description : Alias for channel 1 CTRL register @@ -759,7 +759,7 @@ #define DMA_CH1_AL3_CTRL_RESET "-" #define DMA_CH1_AL3_CTRL_MSB _u(31) #define DMA_CH1_AL3_CTRL_LSB _u(0) -#define DMA_CH1_AL3_CTRL_ACCESS "RO" +#define DMA_CH1_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL3_WRITE_ADDR // Description : Alias for channel 1 WRITE_ADDR register @@ -768,7 +768,7 @@ #define DMA_CH1_AL3_WRITE_ADDR_RESET "-" #define DMA_CH1_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH1_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH1_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH1_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL3_TRANS_COUNT // Description : Alias for channel 1 TRANS_COUNT register @@ -777,7 +777,7 @@ #define DMA_CH1_AL3_TRANS_COUNT_RESET "-" #define DMA_CH1_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH1_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH1_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH1_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH1_AL3_READ_ADDR_TRIG // Description : Alias for channel 1 READ_ADDR register @@ -788,7 +788,7 @@ #define DMA_CH1_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH1_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH1_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH1_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH1_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_READ_ADDR // Description : DMA Channel 2 Read Address pointer @@ -846,7 +846,7 @@ // Description : DMA Channel 2 Control and Status #define DMA_CH2_CTRL_TRIG_OFFSET _u(0x0000008c) #define DMA_CH2_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH2_CTRL_TRIG_RESET _u(0x00001000) +#define DMA_CH2_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH2_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -862,7 +862,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH2_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH2_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -874,8 +874,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH2_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH2_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH2_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -902,8 +902,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH2_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH2_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH2_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -946,23 +946,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH2_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH2_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (2). -#define DMA_CH2_CTRL_TRIG_CHAIN_TO_RESET _u(0x2) +#define DMA_CH2_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH2_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH2_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH2_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -988,11 +987,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH2_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH2_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH2_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH2_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH2_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH2_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH2_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH2_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH2_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH2_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH2_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH2_CTRL_TRIG_INCR_WRITE @@ -1026,14 +1025,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH2_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH2_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH2_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH2_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -1072,7 +1071,7 @@ #define DMA_CH2_AL1_CTRL_RESET "-" #define DMA_CH2_AL1_CTRL_MSB _u(31) #define DMA_CH2_AL1_CTRL_LSB _u(0) -#define DMA_CH2_AL1_CTRL_ACCESS "RO" +#define DMA_CH2_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL1_READ_ADDR // Description : Alias for channel 2 READ_ADDR register @@ -1081,7 +1080,7 @@ #define DMA_CH2_AL1_READ_ADDR_RESET "-" #define DMA_CH2_AL1_READ_ADDR_MSB _u(31) #define DMA_CH2_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH2_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH2_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL1_WRITE_ADDR // Description : Alias for channel 2 WRITE_ADDR register @@ -1090,7 +1089,7 @@ #define DMA_CH2_AL1_WRITE_ADDR_RESET "-" #define DMA_CH2_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH2_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH2_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH2_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 2 TRANS_COUNT register @@ -1101,7 +1100,7 @@ #define DMA_CH2_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH2_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH2_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH2_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH2_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL2_CTRL // Description : Alias for channel 2 CTRL register @@ -1110,7 +1109,7 @@ #define DMA_CH2_AL2_CTRL_RESET "-" #define DMA_CH2_AL2_CTRL_MSB _u(31) #define DMA_CH2_AL2_CTRL_LSB _u(0) -#define DMA_CH2_AL2_CTRL_ACCESS "RO" +#define DMA_CH2_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL2_TRANS_COUNT // Description : Alias for channel 2 TRANS_COUNT register @@ -1119,7 +1118,7 @@ #define DMA_CH2_AL2_TRANS_COUNT_RESET "-" #define DMA_CH2_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH2_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH2_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH2_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL2_READ_ADDR // Description : Alias for channel 2 READ_ADDR register @@ -1128,7 +1127,7 @@ #define DMA_CH2_AL2_READ_ADDR_RESET "-" #define DMA_CH2_AL2_READ_ADDR_MSB _u(31) #define DMA_CH2_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH2_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH2_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 2 WRITE_ADDR register @@ -1139,7 +1138,7 @@ #define DMA_CH2_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH2_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH2_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH2_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH2_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL3_CTRL // Description : Alias for channel 2 CTRL register @@ -1148,7 +1147,7 @@ #define DMA_CH2_AL3_CTRL_RESET "-" #define DMA_CH2_AL3_CTRL_MSB _u(31) #define DMA_CH2_AL3_CTRL_LSB _u(0) -#define DMA_CH2_AL3_CTRL_ACCESS "RO" +#define DMA_CH2_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL3_WRITE_ADDR // Description : Alias for channel 2 WRITE_ADDR register @@ -1157,7 +1156,7 @@ #define DMA_CH2_AL3_WRITE_ADDR_RESET "-" #define DMA_CH2_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH2_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH2_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH2_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL3_TRANS_COUNT // Description : Alias for channel 2 TRANS_COUNT register @@ -1166,7 +1165,7 @@ #define DMA_CH2_AL3_TRANS_COUNT_RESET "-" #define DMA_CH2_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH2_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH2_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH2_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH2_AL3_READ_ADDR_TRIG // Description : Alias for channel 2 READ_ADDR register @@ -1177,7 +1176,7 @@ #define DMA_CH2_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH2_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH2_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH2_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH2_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_READ_ADDR // Description : DMA Channel 3 Read Address pointer @@ -1235,7 +1234,7 @@ // Description : DMA Channel 3 Control and Status #define DMA_CH3_CTRL_TRIG_OFFSET _u(0x000000cc) #define DMA_CH3_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH3_CTRL_TRIG_RESET _u(0x00001800) +#define DMA_CH3_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH3_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -1251,7 +1250,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH3_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH3_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -1263,8 +1262,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH3_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH3_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH3_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -1291,8 +1290,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH3_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH3_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH3_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -1335,23 +1334,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH3_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH3_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (3). -#define DMA_CH3_CTRL_TRIG_CHAIN_TO_RESET _u(0x3) +#define DMA_CH3_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH3_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH3_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH3_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -1377,11 +1375,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH3_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH3_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH3_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH3_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH3_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH3_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH3_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH3_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH3_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH3_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH3_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH3_CTRL_TRIG_INCR_WRITE @@ -1415,14 +1413,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH3_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH3_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH3_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH3_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -1461,7 +1459,7 @@ #define DMA_CH3_AL1_CTRL_RESET "-" #define DMA_CH3_AL1_CTRL_MSB _u(31) #define DMA_CH3_AL1_CTRL_LSB _u(0) -#define DMA_CH3_AL1_CTRL_ACCESS "RO" +#define DMA_CH3_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL1_READ_ADDR // Description : Alias for channel 3 READ_ADDR register @@ -1470,7 +1468,7 @@ #define DMA_CH3_AL1_READ_ADDR_RESET "-" #define DMA_CH3_AL1_READ_ADDR_MSB _u(31) #define DMA_CH3_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH3_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH3_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL1_WRITE_ADDR // Description : Alias for channel 3 WRITE_ADDR register @@ -1479,7 +1477,7 @@ #define DMA_CH3_AL1_WRITE_ADDR_RESET "-" #define DMA_CH3_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH3_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH3_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH3_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 3 TRANS_COUNT register @@ -1490,7 +1488,7 @@ #define DMA_CH3_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH3_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH3_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH3_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH3_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL2_CTRL // Description : Alias for channel 3 CTRL register @@ -1499,7 +1497,7 @@ #define DMA_CH3_AL2_CTRL_RESET "-" #define DMA_CH3_AL2_CTRL_MSB _u(31) #define DMA_CH3_AL2_CTRL_LSB _u(0) -#define DMA_CH3_AL2_CTRL_ACCESS "RO" +#define DMA_CH3_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL2_TRANS_COUNT // Description : Alias for channel 3 TRANS_COUNT register @@ -1508,7 +1506,7 @@ #define DMA_CH3_AL2_TRANS_COUNT_RESET "-" #define DMA_CH3_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH3_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH3_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH3_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL2_READ_ADDR // Description : Alias for channel 3 READ_ADDR register @@ -1517,7 +1515,7 @@ #define DMA_CH3_AL2_READ_ADDR_RESET "-" #define DMA_CH3_AL2_READ_ADDR_MSB _u(31) #define DMA_CH3_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH3_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH3_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 3 WRITE_ADDR register @@ -1528,7 +1526,7 @@ #define DMA_CH3_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH3_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH3_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH3_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH3_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL3_CTRL // Description : Alias for channel 3 CTRL register @@ -1537,7 +1535,7 @@ #define DMA_CH3_AL3_CTRL_RESET "-" #define DMA_CH3_AL3_CTRL_MSB _u(31) #define DMA_CH3_AL3_CTRL_LSB _u(0) -#define DMA_CH3_AL3_CTRL_ACCESS "RO" +#define DMA_CH3_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL3_WRITE_ADDR // Description : Alias for channel 3 WRITE_ADDR register @@ -1546,7 +1544,7 @@ #define DMA_CH3_AL3_WRITE_ADDR_RESET "-" #define DMA_CH3_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH3_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH3_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH3_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL3_TRANS_COUNT // Description : Alias for channel 3 TRANS_COUNT register @@ -1555,7 +1553,7 @@ #define DMA_CH3_AL3_TRANS_COUNT_RESET "-" #define DMA_CH3_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH3_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH3_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH3_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH3_AL3_READ_ADDR_TRIG // Description : Alias for channel 3 READ_ADDR register @@ -1566,7 +1564,7 @@ #define DMA_CH3_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH3_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH3_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH3_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH3_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_READ_ADDR // Description : DMA Channel 4 Read Address pointer @@ -1624,7 +1622,7 @@ // Description : DMA Channel 4 Control and Status #define DMA_CH4_CTRL_TRIG_OFFSET _u(0x0000010c) #define DMA_CH4_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH4_CTRL_TRIG_RESET _u(0x00002000) +#define DMA_CH4_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH4_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -1640,7 +1638,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH4_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH4_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -1652,8 +1650,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH4_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH4_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH4_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -1680,8 +1678,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH4_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH4_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH4_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -1724,23 +1722,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH4_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH4_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (4). -#define DMA_CH4_CTRL_TRIG_CHAIN_TO_RESET _u(0x4) +#define DMA_CH4_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH4_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH4_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH4_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -1766,11 +1763,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH4_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH4_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH4_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH4_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH4_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH4_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH4_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH4_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH4_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH4_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH4_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH4_CTRL_TRIG_INCR_WRITE @@ -1804,14 +1801,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH4_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH4_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH4_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH4_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -1850,7 +1847,7 @@ #define DMA_CH4_AL1_CTRL_RESET "-" #define DMA_CH4_AL1_CTRL_MSB _u(31) #define DMA_CH4_AL1_CTRL_LSB _u(0) -#define DMA_CH4_AL1_CTRL_ACCESS "RO" +#define DMA_CH4_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL1_READ_ADDR // Description : Alias for channel 4 READ_ADDR register @@ -1859,7 +1856,7 @@ #define DMA_CH4_AL1_READ_ADDR_RESET "-" #define DMA_CH4_AL1_READ_ADDR_MSB _u(31) #define DMA_CH4_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH4_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH4_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL1_WRITE_ADDR // Description : Alias for channel 4 WRITE_ADDR register @@ -1868,7 +1865,7 @@ #define DMA_CH4_AL1_WRITE_ADDR_RESET "-" #define DMA_CH4_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH4_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH4_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH4_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 4 TRANS_COUNT register @@ -1879,7 +1876,7 @@ #define DMA_CH4_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH4_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH4_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH4_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH4_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL2_CTRL // Description : Alias for channel 4 CTRL register @@ -1888,7 +1885,7 @@ #define DMA_CH4_AL2_CTRL_RESET "-" #define DMA_CH4_AL2_CTRL_MSB _u(31) #define DMA_CH4_AL2_CTRL_LSB _u(0) -#define DMA_CH4_AL2_CTRL_ACCESS "RO" +#define DMA_CH4_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL2_TRANS_COUNT // Description : Alias for channel 4 TRANS_COUNT register @@ -1897,7 +1894,7 @@ #define DMA_CH4_AL2_TRANS_COUNT_RESET "-" #define DMA_CH4_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH4_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH4_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH4_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL2_READ_ADDR // Description : Alias for channel 4 READ_ADDR register @@ -1906,7 +1903,7 @@ #define DMA_CH4_AL2_READ_ADDR_RESET "-" #define DMA_CH4_AL2_READ_ADDR_MSB _u(31) #define DMA_CH4_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH4_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH4_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 4 WRITE_ADDR register @@ -1917,7 +1914,7 @@ #define DMA_CH4_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH4_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH4_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH4_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH4_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL3_CTRL // Description : Alias for channel 4 CTRL register @@ -1926,7 +1923,7 @@ #define DMA_CH4_AL3_CTRL_RESET "-" #define DMA_CH4_AL3_CTRL_MSB _u(31) #define DMA_CH4_AL3_CTRL_LSB _u(0) -#define DMA_CH4_AL3_CTRL_ACCESS "RO" +#define DMA_CH4_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL3_WRITE_ADDR // Description : Alias for channel 4 WRITE_ADDR register @@ -1935,7 +1932,7 @@ #define DMA_CH4_AL3_WRITE_ADDR_RESET "-" #define DMA_CH4_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH4_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH4_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH4_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL3_TRANS_COUNT // Description : Alias for channel 4 TRANS_COUNT register @@ -1944,7 +1941,7 @@ #define DMA_CH4_AL3_TRANS_COUNT_RESET "-" #define DMA_CH4_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH4_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH4_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH4_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH4_AL3_READ_ADDR_TRIG // Description : Alias for channel 4 READ_ADDR register @@ -1955,7 +1952,7 @@ #define DMA_CH4_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH4_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH4_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH4_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH4_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_READ_ADDR // Description : DMA Channel 5 Read Address pointer @@ -2013,7 +2010,7 @@ // Description : DMA Channel 5 Control and Status #define DMA_CH5_CTRL_TRIG_OFFSET _u(0x0000014c) #define DMA_CH5_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH5_CTRL_TRIG_RESET _u(0x00002800) +#define DMA_CH5_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH5_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -2029,7 +2026,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH5_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH5_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -2041,8 +2038,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH5_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH5_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH5_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -2069,8 +2066,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH5_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH5_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH5_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -2113,23 +2110,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH5_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH5_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (5). -#define DMA_CH5_CTRL_TRIG_CHAIN_TO_RESET _u(0x5) +#define DMA_CH5_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH5_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH5_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH5_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -2155,11 +2151,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH5_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH5_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH5_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH5_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH5_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH5_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH5_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH5_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH5_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH5_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH5_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH5_CTRL_TRIG_INCR_WRITE @@ -2193,14 +2189,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH5_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH5_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH5_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH5_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -2239,7 +2235,7 @@ #define DMA_CH5_AL1_CTRL_RESET "-" #define DMA_CH5_AL1_CTRL_MSB _u(31) #define DMA_CH5_AL1_CTRL_LSB _u(0) -#define DMA_CH5_AL1_CTRL_ACCESS "RO" +#define DMA_CH5_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL1_READ_ADDR // Description : Alias for channel 5 READ_ADDR register @@ -2248,7 +2244,7 @@ #define DMA_CH5_AL1_READ_ADDR_RESET "-" #define DMA_CH5_AL1_READ_ADDR_MSB _u(31) #define DMA_CH5_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH5_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH5_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL1_WRITE_ADDR // Description : Alias for channel 5 WRITE_ADDR register @@ -2257,7 +2253,7 @@ #define DMA_CH5_AL1_WRITE_ADDR_RESET "-" #define DMA_CH5_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH5_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH5_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH5_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 5 TRANS_COUNT register @@ -2268,7 +2264,7 @@ #define DMA_CH5_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH5_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH5_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH5_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH5_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL2_CTRL // Description : Alias for channel 5 CTRL register @@ -2277,7 +2273,7 @@ #define DMA_CH5_AL2_CTRL_RESET "-" #define DMA_CH5_AL2_CTRL_MSB _u(31) #define DMA_CH5_AL2_CTRL_LSB _u(0) -#define DMA_CH5_AL2_CTRL_ACCESS "RO" +#define DMA_CH5_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL2_TRANS_COUNT // Description : Alias for channel 5 TRANS_COUNT register @@ -2286,7 +2282,7 @@ #define DMA_CH5_AL2_TRANS_COUNT_RESET "-" #define DMA_CH5_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH5_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH5_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH5_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL2_READ_ADDR // Description : Alias for channel 5 READ_ADDR register @@ -2295,7 +2291,7 @@ #define DMA_CH5_AL2_READ_ADDR_RESET "-" #define DMA_CH5_AL2_READ_ADDR_MSB _u(31) #define DMA_CH5_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH5_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH5_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 5 WRITE_ADDR register @@ -2306,7 +2302,7 @@ #define DMA_CH5_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH5_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH5_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH5_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH5_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL3_CTRL // Description : Alias for channel 5 CTRL register @@ -2315,7 +2311,7 @@ #define DMA_CH5_AL3_CTRL_RESET "-" #define DMA_CH5_AL3_CTRL_MSB _u(31) #define DMA_CH5_AL3_CTRL_LSB _u(0) -#define DMA_CH5_AL3_CTRL_ACCESS "RO" +#define DMA_CH5_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL3_WRITE_ADDR // Description : Alias for channel 5 WRITE_ADDR register @@ -2324,7 +2320,7 @@ #define DMA_CH5_AL3_WRITE_ADDR_RESET "-" #define DMA_CH5_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH5_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH5_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH5_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL3_TRANS_COUNT // Description : Alias for channel 5 TRANS_COUNT register @@ -2333,7 +2329,7 @@ #define DMA_CH5_AL3_TRANS_COUNT_RESET "-" #define DMA_CH5_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH5_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH5_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH5_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH5_AL3_READ_ADDR_TRIG // Description : Alias for channel 5 READ_ADDR register @@ -2344,7 +2340,7 @@ #define DMA_CH5_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH5_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH5_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH5_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH5_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_READ_ADDR // Description : DMA Channel 6 Read Address pointer @@ -2402,7 +2398,7 @@ // Description : DMA Channel 6 Control and Status #define DMA_CH6_CTRL_TRIG_OFFSET _u(0x0000018c) #define DMA_CH6_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH6_CTRL_TRIG_RESET _u(0x00003000) +#define DMA_CH6_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH6_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -2418,7 +2414,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH6_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH6_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -2430,8 +2426,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH6_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH6_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH6_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -2458,8 +2454,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH6_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH6_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH6_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -2502,23 +2498,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH6_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH6_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (6). -#define DMA_CH6_CTRL_TRIG_CHAIN_TO_RESET _u(0x6) +#define DMA_CH6_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH6_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH6_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH6_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -2544,11 +2539,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH6_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH6_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH6_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH6_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH6_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH6_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH6_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH6_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH6_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH6_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH6_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH6_CTRL_TRIG_INCR_WRITE @@ -2582,14 +2577,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH6_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH6_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH6_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH6_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -2628,7 +2623,7 @@ #define DMA_CH6_AL1_CTRL_RESET "-" #define DMA_CH6_AL1_CTRL_MSB _u(31) #define DMA_CH6_AL1_CTRL_LSB _u(0) -#define DMA_CH6_AL1_CTRL_ACCESS "RO" +#define DMA_CH6_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL1_READ_ADDR // Description : Alias for channel 6 READ_ADDR register @@ -2637,7 +2632,7 @@ #define DMA_CH6_AL1_READ_ADDR_RESET "-" #define DMA_CH6_AL1_READ_ADDR_MSB _u(31) #define DMA_CH6_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH6_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH6_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL1_WRITE_ADDR // Description : Alias for channel 6 WRITE_ADDR register @@ -2646,7 +2641,7 @@ #define DMA_CH6_AL1_WRITE_ADDR_RESET "-" #define DMA_CH6_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH6_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH6_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH6_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 6 TRANS_COUNT register @@ -2657,7 +2652,7 @@ #define DMA_CH6_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH6_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH6_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH6_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH6_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL2_CTRL // Description : Alias for channel 6 CTRL register @@ -2666,7 +2661,7 @@ #define DMA_CH6_AL2_CTRL_RESET "-" #define DMA_CH6_AL2_CTRL_MSB _u(31) #define DMA_CH6_AL2_CTRL_LSB _u(0) -#define DMA_CH6_AL2_CTRL_ACCESS "RO" +#define DMA_CH6_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL2_TRANS_COUNT // Description : Alias for channel 6 TRANS_COUNT register @@ -2675,7 +2670,7 @@ #define DMA_CH6_AL2_TRANS_COUNT_RESET "-" #define DMA_CH6_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH6_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH6_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH6_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL2_READ_ADDR // Description : Alias for channel 6 READ_ADDR register @@ -2684,7 +2679,7 @@ #define DMA_CH6_AL2_READ_ADDR_RESET "-" #define DMA_CH6_AL2_READ_ADDR_MSB _u(31) #define DMA_CH6_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH6_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH6_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 6 WRITE_ADDR register @@ -2695,7 +2690,7 @@ #define DMA_CH6_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH6_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH6_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH6_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH6_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL3_CTRL // Description : Alias for channel 6 CTRL register @@ -2704,7 +2699,7 @@ #define DMA_CH6_AL3_CTRL_RESET "-" #define DMA_CH6_AL3_CTRL_MSB _u(31) #define DMA_CH6_AL3_CTRL_LSB _u(0) -#define DMA_CH6_AL3_CTRL_ACCESS "RO" +#define DMA_CH6_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL3_WRITE_ADDR // Description : Alias for channel 6 WRITE_ADDR register @@ -2713,7 +2708,7 @@ #define DMA_CH6_AL3_WRITE_ADDR_RESET "-" #define DMA_CH6_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH6_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH6_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH6_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL3_TRANS_COUNT // Description : Alias for channel 6 TRANS_COUNT register @@ -2722,7 +2717,7 @@ #define DMA_CH6_AL3_TRANS_COUNT_RESET "-" #define DMA_CH6_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH6_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH6_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH6_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH6_AL3_READ_ADDR_TRIG // Description : Alias for channel 6 READ_ADDR register @@ -2733,7 +2728,7 @@ #define DMA_CH6_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH6_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH6_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH6_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH6_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_READ_ADDR // Description : DMA Channel 7 Read Address pointer @@ -2791,7 +2786,7 @@ // Description : DMA Channel 7 Control and Status #define DMA_CH7_CTRL_TRIG_OFFSET _u(0x000001cc) #define DMA_CH7_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH7_CTRL_TRIG_RESET _u(0x00003800) +#define DMA_CH7_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH7_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -2807,7 +2802,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH7_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH7_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -2819,8 +2814,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH7_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH7_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH7_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -2847,8 +2842,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH7_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH7_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH7_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -2891,23 +2886,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH7_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH7_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (7). -#define DMA_CH7_CTRL_TRIG_CHAIN_TO_RESET _u(0x7) +#define DMA_CH7_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH7_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH7_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH7_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -2933,11 +2927,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH7_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH7_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH7_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH7_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH7_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH7_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH7_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH7_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH7_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH7_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH7_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH7_CTRL_TRIG_INCR_WRITE @@ -2971,14 +2965,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH7_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH7_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH7_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH7_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -3017,7 +3011,7 @@ #define DMA_CH7_AL1_CTRL_RESET "-" #define DMA_CH7_AL1_CTRL_MSB _u(31) #define DMA_CH7_AL1_CTRL_LSB _u(0) -#define DMA_CH7_AL1_CTRL_ACCESS "RO" +#define DMA_CH7_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL1_READ_ADDR // Description : Alias for channel 7 READ_ADDR register @@ -3026,7 +3020,7 @@ #define DMA_CH7_AL1_READ_ADDR_RESET "-" #define DMA_CH7_AL1_READ_ADDR_MSB _u(31) #define DMA_CH7_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH7_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH7_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL1_WRITE_ADDR // Description : Alias for channel 7 WRITE_ADDR register @@ -3035,7 +3029,7 @@ #define DMA_CH7_AL1_WRITE_ADDR_RESET "-" #define DMA_CH7_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH7_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH7_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH7_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 7 TRANS_COUNT register @@ -3046,7 +3040,7 @@ #define DMA_CH7_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH7_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH7_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH7_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH7_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL2_CTRL // Description : Alias for channel 7 CTRL register @@ -3055,7 +3049,7 @@ #define DMA_CH7_AL2_CTRL_RESET "-" #define DMA_CH7_AL2_CTRL_MSB _u(31) #define DMA_CH7_AL2_CTRL_LSB _u(0) -#define DMA_CH7_AL2_CTRL_ACCESS "RO" +#define DMA_CH7_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL2_TRANS_COUNT // Description : Alias for channel 7 TRANS_COUNT register @@ -3064,7 +3058,7 @@ #define DMA_CH7_AL2_TRANS_COUNT_RESET "-" #define DMA_CH7_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH7_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH7_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH7_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL2_READ_ADDR // Description : Alias for channel 7 READ_ADDR register @@ -3073,7 +3067,7 @@ #define DMA_CH7_AL2_READ_ADDR_RESET "-" #define DMA_CH7_AL2_READ_ADDR_MSB _u(31) #define DMA_CH7_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH7_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH7_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 7 WRITE_ADDR register @@ -3084,7 +3078,7 @@ #define DMA_CH7_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH7_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH7_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH7_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH7_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL3_CTRL // Description : Alias for channel 7 CTRL register @@ -3093,7 +3087,7 @@ #define DMA_CH7_AL3_CTRL_RESET "-" #define DMA_CH7_AL3_CTRL_MSB _u(31) #define DMA_CH7_AL3_CTRL_LSB _u(0) -#define DMA_CH7_AL3_CTRL_ACCESS "RO" +#define DMA_CH7_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL3_WRITE_ADDR // Description : Alias for channel 7 WRITE_ADDR register @@ -3102,7 +3096,7 @@ #define DMA_CH7_AL3_WRITE_ADDR_RESET "-" #define DMA_CH7_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH7_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH7_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH7_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL3_TRANS_COUNT // Description : Alias for channel 7 TRANS_COUNT register @@ -3111,7 +3105,7 @@ #define DMA_CH7_AL3_TRANS_COUNT_RESET "-" #define DMA_CH7_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH7_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH7_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH7_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH7_AL3_READ_ADDR_TRIG // Description : Alias for channel 7 READ_ADDR register @@ -3122,7 +3116,7 @@ #define DMA_CH7_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH7_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH7_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH7_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH7_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_READ_ADDR // Description : DMA Channel 8 Read Address pointer @@ -3180,7 +3174,7 @@ // Description : DMA Channel 8 Control and Status #define DMA_CH8_CTRL_TRIG_OFFSET _u(0x0000020c) #define DMA_CH8_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH8_CTRL_TRIG_RESET _u(0x00004000) +#define DMA_CH8_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH8_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -3196,7 +3190,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH8_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH8_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -3208,8 +3202,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH8_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH8_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH8_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -3236,8 +3230,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH8_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH8_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH8_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -3280,23 +3274,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH8_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH8_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (8). -#define DMA_CH8_CTRL_TRIG_CHAIN_TO_RESET _u(0x8) +#define DMA_CH8_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH8_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH8_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH8_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -3322,11 +3315,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH8_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH8_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH8_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH8_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH8_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH8_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH8_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH8_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH8_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH8_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH8_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH8_CTRL_TRIG_INCR_WRITE @@ -3360,14 +3353,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH8_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH8_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH8_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH8_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -3406,7 +3399,7 @@ #define DMA_CH8_AL1_CTRL_RESET "-" #define DMA_CH8_AL1_CTRL_MSB _u(31) #define DMA_CH8_AL1_CTRL_LSB _u(0) -#define DMA_CH8_AL1_CTRL_ACCESS "RO" +#define DMA_CH8_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL1_READ_ADDR // Description : Alias for channel 8 READ_ADDR register @@ -3415,7 +3408,7 @@ #define DMA_CH8_AL1_READ_ADDR_RESET "-" #define DMA_CH8_AL1_READ_ADDR_MSB _u(31) #define DMA_CH8_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH8_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH8_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL1_WRITE_ADDR // Description : Alias for channel 8 WRITE_ADDR register @@ -3424,7 +3417,7 @@ #define DMA_CH8_AL1_WRITE_ADDR_RESET "-" #define DMA_CH8_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH8_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH8_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH8_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 8 TRANS_COUNT register @@ -3435,7 +3428,7 @@ #define DMA_CH8_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH8_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH8_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH8_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH8_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL2_CTRL // Description : Alias for channel 8 CTRL register @@ -3444,7 +3437,7 @@ #define DMA_CH8_AL2_CTRL_RESET "-" #define DMA_CH8_AL2_CTRL_MSB _u(31) #define DMA_CH8_AL2_CTRL_LSB _u(0) -#define DMA_CH8_AL2_CTRL_ACCESS "RO" +#define DMA_CH8_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL2_TRANS_COUNT // Description : Alias for channel 8 TRANS_COUNT register @@ -3453,7 +3446,7 @@ #define DMA_CH8_AL2_TRANS_COUNT_RESET "-" #define DMA_CH8_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH8_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH8_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH8_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL2_READ_ADDR // Description : Alias for channel 8 READ_ADDR register @@ -3462,7 +3455,7 @@ #define DMA_CH8_AL2_READ_ADDR_RESET "-" #define DMA_CH8_AL2_READ_ADDR_MSB _u(31) #define DMA_CH8_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH8_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH8_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 8 WRITE_ADDR register @@ -3473,7 +3466,7 @@ #define DMA_CH8_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH8_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH8_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH8_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH8_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL3_CTRL // Description : Alias for channel 8 CTRL register @@ -3482,7 +3475,7 @@ #define DMA_CH8_AL3_CTRL_RESET "-" #define DMA_CH8_AL3_CTRL_MSB _u(31) #define DMA_CH8_AL3_CTRL_LSB _u(0) -#define DMA_CH8_AL3_CTRL_ACCESS "RO" +#define DMA_CH8_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL3_WRITE_ADDR // Description : Alias for channel 8 WRITE_ADDR register @@ -3491,7 +3484,7 @@ #define DMA_CH8_AL3_WRITE_ADDR_RESET "-" #define DMA_CH8_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH8_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH8_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH8_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL3_TRANS_COUNT // Description : Alias for channel 8 TRANS_COUNT register @@ -3500,7 +3493,7 @@ #define DMA_CH8_AL3_TRANS_COUNT_RESET "-" #define DMA_CH8_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH8_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH8_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH8_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH8_AL3_READ_ADDR_TRIG // Description : Alias for channel 8 READ_ADDR register @@ -3511,7 +3504,7 @@ #define DMA_CH8_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH8_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH8_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH8_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH8_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_READ_ADDR // Description : DMA Channel 9 Read Address pointer @@ -3569,7 +3562,7 @@ // Description : DMA Channel 9 Control and Status #define DMA_CH9_CTRL_TRIG_OFFSET _u(0x0000024c) #define DMA_CH9_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH9_CTRL_TRIG_RESET _u(0x00004800) +#define DMA_CH9_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH9_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -3585,7 +3578,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH9_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH9_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -3597,8 +3590,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH9_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH9_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH9_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -3625,8 +3618,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH9_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH9_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH9_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -3669,23 +3662,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH9_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH9_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (9). -#define DMA_CH9_CTRL_TRIG_CHAIN_TO_RESET _u(0x9) +#define DMA_CH9_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH9_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH9_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH9_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -3711,11 +3703,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH9_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH9_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH9_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH9_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH9_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH9_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH9_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH9_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH9_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH9_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH9_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH9_CTRL_TRIG_INCR_WRITE @@ -3749,14 +3741,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH9_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH9_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH9_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH9_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -3795,7 +3787,7 @@ #define DMA_CH9_AL1_CTRL_RESET "-" #define DMA_CH9_AL1_CTRL_MSB _u(31) #define DMA_CH9_AL1_CTRL_LSB _u(0) -#define DMA_CH9_AL1_CTRL_ACCESS "RO" +#define DMA_CH9_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL1_READ_ADDR // Description : Alias for channel 9 READ_ADDR register @@ -3804,7 +3796,7 @@ #define DMA_CH9_AL1_READ_ADDR_RESET "-" #define DMA_CH9_AL1_READ_ADDR_MSB _u(31) #define DMA_CH9_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH9_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH9_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL1_WRITE_ADDR // Description : Alias for channel 9 WRITE_ADDR register @@ -3813,7 +3805,7 @@ #define DMA_CH9_AL1_WRITE_ADDR_RESET "-" #define DMA_CH9_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH9_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH9_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH9_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 9 TRANS_COUNT register @@ -3824,7 +3816,7 @@ #define DMA_CH9_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH9_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH9_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH9_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH9_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL2_CTRL // Description : Alias for channel 9 CTRL register @@ -3833,7 +3825,7 @@ #define DMA_CH9_AL2_CTRL_RESET "-" #define DMA_CH9_AL2_CTRL_MSB _u(31) #define DMA_CH9_AL2_CTRL_LSB _u(0) -#define DMA_CH9_AL2_CTRL_ACCESS "RO" +#define DMA_CH9_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL2_TRANS_COUNT // Description : Alias for channel 9 TRANS_COUNT register @@ -3842,7 +3834,7 @@ #define DMA_CH9_AL2_TRANS_COUNT_RESET "-" #define DMA_CH9_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH9_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH9_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH9_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL2_READ_ADDR // Description : Alias for channel 9 READ_ADDR register @@ -3851,7 +3843,7 @@ #define DMA_CH9_AL2_READ_ADDR_RESET "-" #define DMA_CH9_AL2_READ_ADDR_MSB _u(31) #define DMA_CH9_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH9_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH9_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 9 WRITE_ADDR register @@ -3862,7 +3854,7 @@ #define DMA_CH9_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH9_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH9_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH9_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH9_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL3_CTRL // Description : Alias for channel 9 CTRL register @@ -3871,7 +3863,7 @@ #define DMA_CH9_AL3_CTRL_RESET "-" #define DMA_CH9_AL3_CTRL_MSB _u(31) #define DMA_CH9_AL3_CTRL_LSB _u(0) -#define DMA_CH9_AL3_CTRL_ACCESS "RO" +#define DMA_CH9_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL3_WRITE_ADDR // Description : Alias for channel 9 WRITE_ADDR register @@ -3880,7 +3872,7 @@ #define DMA_CH9_AL3_WRITE_ADDR_RESET "-" #define DMA_CH9_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH9_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH9_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH9_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL3_TRANS_COUNT // Description : Alias for channel 9 TRANS_COUNT register @@ -3889,7 +3881,7 @@ #define DMA_CH9_AL3_TRANS_COUNT_RESET "-" #define DMA_CH9_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH9_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH9_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH9_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH9_AL3_READ_ADDR_TRIG // Description : Alias for channel 9 READ_ADDR register @@ -3900,7 +3892,7 @@ #define DMA_CH9_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH9_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH9_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH9_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH9_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_READ_ADDR // Description : DMA Channel 10 Read Address pointer @@ -3958,7 +3950,7 @@ // Description : DMA Channel 10 Control and Status #define DMA_CH10_CTRL_TRIG_OFFSET _u(0x0000028c) #define DMA_CH10_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH10_CTRL_TRIG_RESET _u(0x00005000) +#define DMA_CH10_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH10_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -3974,7 +3966,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH10_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH10_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -3986,8 +3978,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH10_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH10_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH10_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -4014,8 +4006,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH10_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH10_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH10_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -4058,23 +4050,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH10_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH10_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (10). -#define DMA_CH10_CTRL_TRIG_CHAIN_TO_RESET _u(0xa) +#define DMA_CH10_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH10_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH10_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH10_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -4100,11 +4091,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH10_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH10_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH10_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH10_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH10_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH10_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH10_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH10_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH10_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH10_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH10_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH10_CTRL_TRIG_INCR_WRITE @@ -4138,14 +4129,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH10_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH10_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH10_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH10_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -4184,7 +4175,7 @@ #define DMA_CH10_AL1_CTRL_RESET "-" #define DMA_CH10_AL1_CTRL_MSB _u(31) #define DMA_CH10_AL1_CTRL_LSB _u(0) -#define DMA_CH10_AL1_CTRL_ACCESS "RO" +#define DMA_CH10_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL1_READ_ADDR // Description : Alias for channel 10 READ_ADDR register @@ -4193,7 +4184,7 @@ #define DMA_CH10_AL1_READ_ADDR_RESET "-" #define DMA_CH10_AL1_READ_ADDR_MSB _u(31) #define DMA_CH10_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH10_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH10_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL1_WRITE_ADDR // Description : Alias for channel 10 WRITE_ADDR register @@ -4202,7 +4193,7 @@ #define DMA_CH10_AL1_WRITE_ADDR_RESET "-" #define DMA_CH10_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH10_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH10_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH10_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 10 TRANS_COUNT register @@ -4213,7 +4204,7 @@ #define DMA_CH10_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH10_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH10_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH10_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH10_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL2_CTRL // Description : Alias for channel 10 CTRL register @@ -4222,7 +4213,7 @@ #define DMA_CH10_AL2_CTRL_RESET "-" #define DMA_CH10_AL2_CTRL_MSB _u(31) #define DMA_CH10_AL2_CTRL_LSB _u(0) -#define DMA_CH10_AL2_CTRL_ACCESS "RO" +#define DMA_CH10_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL2_TRANS_COUNT // Description : Alias for channel 10 TRANS_COUNT register @@ -4231,7 +4222,7 @@ #define DMA_CH10_AL2_TRANS_COUNT_RESET "-" #define DMA_CH10_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH10_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH10_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH10_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL2_READ_ADDR // Description : Alias for channel 10 READ_ADDR register @@ -4240,7 +4231,7 @@ #define DMA_CH10_AL2_READ_ADDR_RESET "-" #define DMA_CH10_AL2_READ_ADDR_MSB _u(31) #define DMA_CH10_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH10_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH10_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 10 WRITE_ADDR register @@ -4251,7 +4242,7 @@ #define DMA_CH10_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH10_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH10_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH10_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH10_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL3_CTRL // Description : Alias for channel 10 CTRL register @@ -4260,7 +4251,7 @@ #define DMA_CH10_AL3_CTRL_RESET "-" #define DMA_CH10_AL3_CTRL_MSB _u(31) #define DMA_CH10_AL3_CTRL_LSB _u(0) -#define DMA_CH10_AL3_CTRL_ACCESS "RO" +#define DMA_CH10_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL3_WRITE_ADDR // Description : Alias for channel 10 WRITE_ADDR register @@ -4269,7 +4260,7 @@ #define DMA_CH10_AL3_WRITE_ADDR_RESET "-" #define DMA_CH10_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH10_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH10_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH10_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL3_TRANS_COUNT // Description : Alias for channel 10 TRANS_COUNT register @@ -4278,7 +4269,7 @@ #define DMA_CH10_AL3_TRANS_COUNT_RESET "-" #define DMA_CH10_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH10_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH10_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH10_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH10_AL3_READ_ADDR_TRIG // Description : Alias for channel 10 READ_ADDR register @@ -4289,7 +4280,7 @@ #define DMA_CH10_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH10_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH10_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH10_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH10_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_READ_ADDR // Description : DMA Channel 11 Read Address pointer @@ -4347,7 +4338,7 @@ // Description : DMA Channel 11 Control and Status #define DMA_CH11_CTRL_TRIG_OFFSET _u(0x000002cc) #define DMA_CH11_CTRL_TRIG_BITS _u(0xe1ffffff) -#define DMA_CH11_CTRL_TRIG_RESET _u(0x00005800) +#define DMA_CH11_CTRL_TRIG_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : DMA_CH11_CTRL_TRIG_AHB_ERROR // Description : Logical OR of the READ_ERROR and WRITE_ERROR flags. The channel @@ -4363,7 +4354,7 @@ // Description : If 1, the channel received a read bus error. Write one to // clear. // READ_ADDR shows the approximate address where the bus error was -// encountered (will not to be earlier, or more than 3 transfers +// encountered (will not be earlier, or more than 3 transfers // later) #define DMA_CH11_CTRL_TRIG_READ_ERROR_RESET _u(0x0) #define DMA_CH11_CTRL_TRIG_READ_ERROR_BITS _u(0x40000000) @@ -4375,8 +4366,8 @@ // Description : If 1, the channel received a write bus error. Write one to // clear. // WRITE_ADDR shows the approximate address where the bus error -// was encountered (will not to be earlier, or more than 5 -// transfers later) +// was encountered (will not be earlier, or more than 5 transfers +// later) #define DMA_CH11_CTRL_TRIG_WRITE_ERROR_RESET _u(0x0) #define DMA_CH11_CTRL_TRIG_WRITE_ERROR_BITS _u(0x20000000) #define DMA_CH11_CTRL_TRIG_WRITE_ERROR_MSB _u(29) @@ -4403,8 +4394,8 @@ // checksum. This only applies if the sniff hardware is enabled, // and has this channel selected. // -// This allows checksum to be enabled or disabled on a -// per-control- block basis. +// This allows checksum to be enabled or disabled on a per- +// control- block basis. #define DMA_CH11_CTRL_TRIG_SNIFF_EN_RESET _u(0x0) #define DMA_CH11_CTRL_TRIG_SNIFF_EN_BITS _u(0x00800000) #define DMA_CH11_CTRL_TRIG_SNIFF_EN_MSB _u(23) @@ -4447,23 +4438,22 @@ // 0x3d -> Select Timer 2 as TREQ (Optional) // 0x3e -> Select Timer 3 as TREQ (Optional) // 0x3f -> Permanent request, for unpaced transfers. -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_MSB _u(20) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_LSB _u(15) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_ACCESS "RW" -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) -#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_RESET _u(0x00) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_BITS _u(0x001f8000) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_MSB _u(20) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_LSB _u(15) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_ACCESS "RW" +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER0 _u(0x3b) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER1 _u(0x3c) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER2 _u(0x3d) +#define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_TIMER3 _u(0x3e) #define DMA_CH11_CTRL_TRIG_TREQ_SEL_VALUE_PERMANENT _u(0x3f) // ----------------------------------------------------------------------------- // Field : DMA_CH11_CTRL_TRIG_CHAIN_TO // Description : When this channel completes, it will trigger the channel // indicated by CHAIN_TO. Disable by setting CHAIN_TO = _(this // channel)_. -// Reset value is equal to channel number (11). -#define DMA_CH11_CTRL_TRIG_CHAIN_TO_RESET _u(0xb) +#define DMA_CH11_CTRL_TRIG_CHAIN_TO_RESET _u(0x0) #define DMA_CH11_CTRL_TRIG_CHAIN_TO_BITS _u(0x00007800) #define DMA_CH11_CTRL_TRIG_CHAIN_TO_MSB _u(14) #define DMA_CH11_CTRL_TRIG_CHAIN_TO_LSB _u(11) @@ -4489,11 +4479,11 @@ // apply to either read or write addresses, based on value of // RING_SEL. // 0x0 -> RING_NONE -#define DMA_CH11_CTRL_TRIG_RING_SIZE_RESET _u(0x0) -#define DMA_CH11_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) -#define DMA_CH11_CTRL_TRIG_RING_SIZE_MSB _u(9) -#define DMA_CH11_CTRL_TRIG_RING_SIZE_LSB _u(6) -#define DMA_CH11_CTRL_TRIG_RING_SIZE_ACCESS "RW" +#define DMA_CH11_CTRL_TRIG_RING_SIZE_RESET _u(0x0) +#define DMA_CH11_CTRL_TRIG_RING_SIZE_BITS _u(0x000003c0) +#define DMA_CH11_CTRL_TRIG_RING_SIZE_MSB _u(9) +#define DMA_CH11_CTRL_TRIG_RING_SIZE_LSB _u(6) +#define DMA_CH11_CTRL_TRIG_RING_SIZE_ACCESS "RW" #define DMA_CH11_CTRL_TRIG_RING_SIZE_VALUE_RING_NONE _u(0x0) // ----------------------------------------------------------------------------- // Field : DMA_CH11_CTRL_TRIG_INCR_WRITE @@ -4527,14 +4517,14 @@ // 0x0 -> SIZE_BYTE // 0x1 -> SIZE_HALFWORD // 0x2 -> SIZE_WORD -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_MSB _u(3) -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_LSB _u(2) -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_ACCESS "RW" -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_RESET _u(0x0) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_BITS _u(0x0000000c) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_MSB _u(3) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_LSB _u(2) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_ACCESS "RW" +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_BYTE _u(0x0) #define DMA_CH11_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_HALFWORD _u(0x1) -#define DMA_CH11_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) +#define DMA_CH11_CTRL_TRIG_DATA_SIZE_VALUE_SIZE_WORD _u(0x2) // ----------------------------------------------------------------------------- // Field : DMA_CH11_CTRL_TRIG_HIGH_PRIORITY // Description : HIGH_PRIORITY gives a channel preferential treatment in issue @@ -4573,7 +4563,7 @@ #define DMA_CH11_AL1_CTRL_RESET "-" #define DMA_CH11_AL1_CTRL_MSB _u(31) #define DMA_CH11_AL1_CTRL_LSB _u(0) -#define DMA_CH11_AL1_CTRL_ACCESS "RO" +#define DMA_CH11_AL1_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL1_READ_ADDR // Description : Alias for channel 11 READ_ADDR register @@ -4582,7 +4572,7 @@ #define DMA_CH11_AL1_READ_ADDR_RESET "-" #define DMA_CH11_AL1_READ_ADDR_MSB _u(31) #define DMA_CH11_AL1_READ_ADDR_LSB _u(0) -#define DMA_CH11_AL1_READ_ADDR_ACCESS "RO" +#define DMA_CH11_AL1_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL1_WRITE_ADDR // Description : Alias for channel 11 WRITE_ADDR register @@ -4591,7 +4581,7 @@ #define DMA_CH11_AL1_WRITE_ADDR_RESET "-" #define DMA_CH11_AL1_WRITE_ADDR_MSB _u(31) #define DMA_CH11_AL1_WRITE_ADDR_LSB _u(0) -#define DMA_CH11_AL1_WRITE_ADDR_ACCESS "RO" +#define DMA_CH11_AL1_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL1_TRANS_COUNT_TRIG // Description : Alias for channel 11 TRANS_COUNT register @@ -4602,7 +4592,7 @@ #define DMA_CH11_AL1_TRANS_COUNT_TRIG_RESET "-" #define DMA_CH11_AL1_TRANS_COUNT_TRIG_MSB _u(31) #define DMA_CH11_AL1_TRANS_COUNT_TRIG_LSB _u(0) -#define DMA_CH11_AL1_TRANS_COUNT_TRIG_ACCESS "RO" +#define DMA_CH11_AL1_TRANS_COUNT_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL2_CTRL // Description : Alias for channel 11 CTRL register @@ -4611,7 +4601,7 @@ #define DMA_CH11_AL2_CTRL_RESET "-" #define DMA_CH11_AL2_CTRL_MSB _u(31) #define DMA_CH11_AL2_CTRL_LSB _u(0) -#define DMA_CH11_AL2_CTRL_ACCESS "RO" +#define DMA_CH11_AL2_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL2_TRANS_COUNT // Description : Alias for channel 11 TRANS_COUNT register @@ -4620,7 +4610,7 @@ #define DMA_CH11_AL2_TRANS_COUNT_RESET "-" #define DMA_CH11_AL2_TRANS_COUNT_MSB _u(31) #define DMA_CH11_AL2_TRANS_COUNT_LSB _u(0) -#define DMA_CH11_AL2_TRANS_COUNT_ACCESS "RO" +#define DMA_CH11_AL2_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL2_READ_ADDR // Description : Alias for channel 11 READ_ADDR register @@ -4629,7 +4619,7 @@ #define DMA_CH11_AL2_READ_ADDR_RESET "-" #define DMA_CH11_AL2_READ_ADDR_MSB _u(31) #define DMA_CH11_AL2_READ_ADDR_LSB _u(0) -#define DMA_CH11_AL2_READ_ADDR_ACCESS "RO" +#define DMA_CH11_AL2_READ_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL2_WRITE_ADDR_TRIG // Description : Alias for channel 11 WRITE_ADDR register @@ -4640,7 +4630,7 @@ #define DMA_CH11_AL2_WRITE_ADDR_TRIG_RESET "-" #define DMA_CH11_AL2_WRITE_ADDR_TRIG_MSB _u(31) #define DMA_CH11_AL2_WRITE_ADDR_TRIG_LSB _u(0) -#define DMA_CH11_AL2_WRITE_ADDR_TRIG_ACCESS "RO" +#define DMA_CH11_AL2_WRITE_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL3_CTRL // Description : Alias for channel 11 CTRL register @@ -4649,7 +4639,7 @@ #define DMA_CH11_AL3_CTRL_RESET "-" #define DMA_CH11_AL3_CTRL_MSB _u(31) #define DMA_CH11_AL3_CTRL_LSB _u(0) -#define DMA_CH11_AL3_CTRL_ACCESS "RO" +#define DMA_CH11_AL3_CTRL_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL3_WRITE_ADDR // Description : Alias for channel 11 WRITE_ADDR register @@ -4658,7 +4648,7 @@ #define DMA_CH11_AL3_WRITE_ADDR_RESET "-" #define DMA_CH11_AL3_WRITE_ADDR_MSB _u(31) #define DMA_CH11_AL3_WRITE_ADDR_LSB _u(0) -#define DMA_CH11_AL3_WRITE_ADDR_ACCESS "RO" +#define DMA_CH11_AL3_WRITE_ADDR_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL3_TRANS_COUNT // Description : Alias for channel 11 TRANS_COUNT register @@ -4667,7 +4657,7 @@ #define DMA_CH11_AL3_TRANS_COUNT_RESET "-" #define DMA_CH11_AL3_TRANS_COUNT_MSB _u(31) #define DMA_CH11_AL3_TRANS_COUNT_LSB _u(0) -#define DMA_CH11_AL3_TRANS_COUNT_ACCESS "RO" +#define DMA_CH11_AL3_TRANS_COUNT_ACCESS "RW" // ============================================================================= // Register : DMA_CH11_AL3_READ_ADDR_TRIG // Description : Alias for channel 11 READ_ADDR register @@ -4678,7 +4668,7 @@ #define DMA_CH11_AL3_READ_ADDR_TRIG_RESET "-" #define DMA_CH11_AL3_READ_ADDR_TRIG_MSB _u(31) #define DMA_CH11_AL3_READ_ADDR_TRIG_LSB _u(0) -#define DMA_CH11_AL3_READ_ADDR_TRIG_ACCESS "RO" +#define DMA_CH11_AL3_READ_ADDR_TRIG_ACCESS "RW" // ============================================================================= // Register : DMA_INTR // Description : Interrupt Status (raw) @@ -4702,7 +4692,7 @@ #define DMA_INTR_RESET _u(0x00000000) #define DMA_INTR_MSB _u(15) #define DMA_INTR_LSB _u(0) -#define DMA_INTR_ACCESS "RO" +#define DMA_INTR_ACCESS "WC" // ============================================================================= // Register : DMA_INTE0 // Description : Interrupt Enables for IRQ 0 @@ -4937,26 +4927,23 @@ #define DMA_SNIFF_CTRL_BSWAP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : DMA_SNIFF_CTRL_CALC -// Description : 0x0 -> Calculate a CRC-32 (IEEE802.3 polynomial) -// 0x1 -> Calculate a CRC-32 (IEEE802.3 polynomial) with bit -// reversed data +// 0x0 -> Calculate a CRC-32 (IEEE802.3 polynomial) +// 0x1 -> Calculate a CRC-32 (IEEE802.3 polynomial) with bit reversed data // 0x2 -> Calculate a CRC-16-CCITT // 0x3 -> Calculate a CRC-16-CCITT with bit reversed data -// 0xe -> XOR reduction over all data. == 1 if the total 1 -// population count is odd. -// 0xf -> Calculate a simple 32-bit checksum (addition with a 32 -// bit accumulator) -#define DMA_SNIFF_CTRL_CALC_RESET _u(0x0) -#define DMA_SNIFF_CTRL_CALC_BITS _u(0x000001e0) -#define DMA_SNIFF_CTRL_CALC_MSB _u(8) -#define DMA_SNIFF_CTRL_CALC_LSB _u(5) -#define DMA_SNIFF_CTRL_CALC_ACCESS "RW" -#define DMA_SNIFF_CTRL_CALC_VALUE_CRC32 _u(0x0) +// 0xe -> XOR reduction over all data. == 1 if the total 1 population count is odd. +// 0xf -> Calculate a simple 32-bit checksum (addition with a 32 bit accumulator) +#define DMA_SNIFF_CTRL_CALC_RESET _u(0x0) +#define DMA_SNIFF_CTRL_CALC_BITS _u(0x000001e0) +#define DMA_SNIFF_CTRL_CALC_MSB _u(8) +#define DMA_SNIFF_CTRL_CALC_LSB _u(5) +#define DMA_SNIFF_CTRL_CALC_ACCESS "RW" +#define DMA_SNIFF_CTRL_CALC_VALUE_CRC32 _u(0x0) #define DMA_SNIFF_CTRL_CALC_VALUE_CRC32R _u(0x1) -#define DMA_SNIFF_CTRL_CALC_VALUE_CRC16 _u(0x2) +#define DMA_SNIFF_CTRL_CALC_VALUE_CRC16 _u(0x2) #define DMA_SNIFF_CTRL_CALC_VALUE_CRC16R _u(0x3) -#define DMA_SNIFF_CTRL_CALC_VALUE_EVEN _u(0xe) -#define DMA_SNIFF_CTRL_CALC_VALUE_SUM _u(0xf) +#define DMA_SNIFF_CTRL_CALC_VALUE_EVEN _u(0xe) +#define DMA_SNIFF_CTRL_CALC_VALUE_SUM _u(0xf) // ----------------------------------------------------------------------------- // Field : DMA_SNIFF_CTRL_DMACH // Description : DMA channel for Sniffer to observe @@ -5056,7 +5043,7 @@ #define DMA_CH0_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH0_DBG_CTDREQ_MSB _u(5) #define DMA_CH0_DBG_CTDREQ_LSB _u(0) -#define DMA_CH0_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH0_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH0_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5078,7 +5065,7 @@ #define DMA_CH1_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH1_DBG_CTDREQ_MSB _u(5) #define DMA_CH1_DBG_CTDREQ_LSB _u(0) -#define DMA_CH1_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH1_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH1_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5100,7 +5087,7 @@ #define DMA_CH2_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH2_DBG_CTDREQ_MSB _u(5) #define DMA_CH2_DBG_CTDREQ_LSB _u(0) -#define DMA_CH2_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH2_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH2_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5122,7 +5109,7 @@ #define DMA_CH3_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH3_DBG_CTDREQ_MSB _u(5) #define DMA_CH3_DBG_CTDREQ_LSB _u(0) -#define DMA_CH3_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH3_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH3_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5144,7 +5131,7 @@ #define DMA_CH4_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH4_DBG_CTDREQ_MSB _u(5) #define DMA_CH4_DBG_CTDREQ_LSB _u(0) -#define DMA_CH4_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH4_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH4_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5166,7 +5153,7 @@ #define DMA_CH5_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH5_DBG_CTDREQ_MSB _u(5) #define DMA_CH5_DBG_CTDREQ_LSB _u(0) -#define DMA_CH5_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH5_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH5_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5188,7 +5175,7 @@ #define DMA_CH6_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH6_DBG_CTDREQ_MSB _u(5) #define DMA_CH6_DBG_CTDREQ_LSB _u(0) -#define DMA_CH6_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH6_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH6_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5210,7 +5197,7 @@ #define DMA_CH7_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH7_DBG_CTDREQ_MSB _u(5) #define DMA_CH7_DBG_CTDREQ_LSB _u(0) -#define DMA_CH7_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH7_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH7_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5232,7 +5219,7 @@ #define DMA_CH8_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH8_DBG_CTDREQ_MSB _u(5) #define DMA_CH8_DBG_CTDREQ_LSB _u(0) -#define DMA_CH8_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH8_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH8_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5254,7 +5241,7 @@ #define DMA_CH9_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH9_DBG_CTDREQ_MSB _u(5) #define DMA_CH9_DBG_CTDREQ_LSB _u(0) -#define DMA_CH9_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH9_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH9_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5276,7 +5263,7 @@ #define DMA_CH10_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH10_DBG_CTDREQ_MSB _u(5) #define DMA_CH10_DBG_CTDREQ_LSB _u(0) -#define DMA_CH10_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH10_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH10_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5298,7 +5285,7 @@ #define DMA_CH11_DBG_CTDREQ_RESET _u(0x00000000) #define DMA_CH11_DBG_CTDREQ_MSB _u(5) #define DMA_CH11_DBG_CTDREQ_LSB _u(0) -#define DMA_CH11_DBG_CTDREQ_ACCESS "RO" +#define DMA_CH11_DBG_CTDREQ_ACCESS "WC" // ============================================================================= // Register : DMA_CH11_DBG_TCR // Description : Read to get channel TRANS_COUNT reload value, i.e. the length @@ -5310,4 +5297,5 @@ #define DMA_CH11_DBG_TCR_LSB _u(0) #define DMA_CH11_DBG_TCR_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_DMA_DEFINED +#endif // _HARDWARE_REGS_DMA_H + diff --git a/lib/pico-sdk/rp2040/hardware/regs/dreq.h b/lib/pico-sdk/rp2040/hardware/regs/dreq.h new file mode 100644 index 00000000..d3359f84 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/dreq.h @@ -0,0 +1,117 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _DREQ_H +#define _DREQ_H + +/** + * \file rp2040/dreq.h + */ + +#ifdef __ASSEMBLER__ +#define DREQ_PIO0_TX0 0 +#define DREQ_PIO0_TX1 1 +#define DREQ_PIO0_TX2 2 +#define DREQ_PIO0_TX3 3 +#define DREQ_PIO0_RX0 4 +#define DREQ_PIO0_RX1 5 +#define DREQ_PIO0_RX2 6 +#define DREQ_PIO0_RX3 7 +#define DREQ_PIO1_TX0 8 +#define DREQ_PIO1_TX1 9 +#define DREQ_PIO1_TX2 10 +#define DREQ_PIO1_TX3 11 +#define DREQ_PIO1_RX0 12 +#define DREQ_PIO1_RX1 13 +#define DREQ_PIO1_RX2 14 +#define DREQ_PIO1_RX3 15 +#define DREQ_SPI0_TX 16 +#define DREQ_SPI0_RX 17 +#define DREQ_SPI1_TX 18 +#define DREQ_SPI1_RX 19 +#define DREQ_UART0_TX 20 +#define DREQ_UART0_RX 21 +#define DREQ_UART1_TX 22 +#define DREQ_UART1_RX 23 +#define DREQ_PWM_WRAP0 24 +#define DREQ_PWM_WRAP1 25 +#define DREQ_PWM_WRAP2 26 +#define DREQ_PWM_WRAP3 27 +#define DREQ_PWM_WRAP4 28 +#define DREQ_PWM_WRAP5 29 +#define DREQ_PWM_WRAP6 30 +#define DREQ_PWM_WRAP7 31 +#define DREQ_I2C0_TX 32 +#define DREQ_I2C0_RX 33 +#define DREQ_I2C1_TX 34 +#define DREQ_I2C1_RX 35 +#define DREQ_ADC 36 +#define DREQ_XIP_STREAM 37 +#define DREQ_XIP_SSITX 38 +#define DREQ_XIP_SSIRX 39 +#define DREQ_DMA_TIMER0 59 +#define DREQ_DMA_TIMER1 60 +#define DREQ_DMA_TIMER2 61 +#define DREQ_DMA_TIMER3 62 +#define DREQ_FORCE 63 +#else +/** + * \brief DREQ numbers for DMA pacing on RP2040 (used as typedef \ref dreq_num_t) + * \ingroup hardware_dma + */ +typedef enum dreq_num_rp2040 { + DREQ_PIO0_TX0 = 0, ///< Select PIO0's TX FIFO 0 as DREQ + DREQ_PIO0_TX1 = 1, ///< Select PIO0's TX FIFO 1 as DREQ + DREQ_PIO0_TX2 = 2, ///< Select PIO0's TX FIFO 2 as DREQ + DREQ_PIO0_TX3 = 3, ///< Select PIO0's TX FIFO 3 as DREQ + DREQ_PIO0_RX0 = 4, ///< Select PIO0's RX FIFO 0 as DREQ + DREQ_PIO0_RX1 = 5, ///< Select PIO0's RX FIFO 1 as DREQ + DREQ_PIO0_RX2 = 6, ///< Select PIO0's RX FIFO 2 as DREQ + DREQ_PIO0_RX3 = 7, ///< Select PIO0's RX FIFO 3 as DREQ + DREQ_PIO1_TX0 = 8, ///< Select PIO1's TX FIFO 0 as DREQ + DREQ_PIO1_TX1 = 9, ///< Select PIO1's TX FIFO 1 as DREQ + DREQ_PIO1_TX2 = 10, ///< Select PIO1's TX FIFO 2 as DREQ + DREQ_PIO1_TX3 = 11, ///< Select PIO1's TX FIFO 3 as DREQ + DREQ_PIO1_RX0 = 12, ///< Select PIO1's RX FIFO 0 as DREQ + DREQ_PIO1_RX1 = 13, ///< Select PIO1's RX FIFO 1 as DREQ + DREQ_PIO1_RX2 = 14, ///< Select PIO1's RX FIFO 2 as DREQ + DREQ_PIO1_RX3 = 15, ///< Select PIO1's RX FIFO 3 as DREQ + DREQ_SPI0_TX = 16, ///< Select SPI0's TX FIFO as DREQ + DREQ_SPI0_RX = 17, ///< Select SPI0's RX FIFO as DREQ + DREQ_SPI1_TX = 18, ///< Select SPI1's TX FIFO as DREQ + DREQ_SPI1_RX = 19, ///< Select SPI1's RX FIFO as DREQ + DREQ_UART0_TX = 20, ///< Select UART0's TX FIFO as DREQ + DREQ_UART0_RX = 21, ///< Select UART0's RX FIFO as DREQ + DREQ_UART1_TX = 22, ///< Select UART1's TX FIFO as DREQ + DREQ_UART1_RX = 23, ///< Select UART1's RX FIFO as DREQ + DREQ_PWM_WRAP0 = 24, ///< Select PWM Counter 0's Wrap Value as DREQ + DREQ_PWM_WRAP1 = 25, ///< Select PWM Counter 1's Wrap Value as DREQ + DREQ_PWM_WRAP2 = 26, ///< Select PWM Counter 2's Wrap Value as DREQ + DREQ_PWM_WRAP3 = 27, ///< Select PWM Counter 3's Wrap Value as DREQ + DREQ_PWM_WRAP4 = 28, ///< Select PWM Counter 4's Wrap Value as DREQ + DREQ_PWM_WRAP5 = 29, ///< Select PWM Counter 5's Wrap Value as DREQ + DREQ_PWM_WRAP6 = 30, ///< Select PWM Counter 6's Wrap Value as DREQ + DREQ_PWM_WRAP7 = 31, ///< Select PWM Counter 7's Wrap Value as DREQ + DREQ_I2C0_TX = 32, ///< Select I2C0's TX FIFO as DREQ + DREQ_I2C0_RX = 33, ///< Select I2C0's RX FIFO as DREQ + DREQ_I2C1_TX = 34, ///< Select I2C1's TX FIFO as DREQ + DREQ_I2C1_RX = 35, ///< Select I2C1's RX FIFO as DREQ + DREQ_ADC = 36, ///< Select the ADC as DREQ + DREQ_XIP_STREAM = 37, ///< Select the XIP Streaming FIFO as DREQ + DREQ_XIP_SSITX = 38, ///< Select the XIP SSI TX FIFO as DREQ + DREQ_XIP_SSIRX = 39, ///< Select the XIP SSI RX FIFO as DREQ + DREQ_DMA_TIMER0 = 59, ///< Select DMA_TIMER0 as DREQ + DREQ_DMA_TIMER1 = 60, ///< Select DMA_TIMER0 as DREQ + DREQ_DMA_TIMER2 = 61, ///< Select DMA_TIMER1 as DREQ + DREQ_DMA_TIMER3 = 62, ///< Select DMA_TIMER3 as DREQ + DREQ_FORCE = 63, ///< Select FORCE as DREQ + DREQ_COUNT +} dreq_num_t; +#endif + +#endif // _DREQ_H + diff --git a/lib/rp2040/hardware/regs/i2c.h b/lib/pico-sdk/rp2040/hardware/regs/i2c.h index 9384bed0..f44ceb44 100644 --- a/lib/rp2040/hardware/regs/i2c.h +++ b/lib/pico-sdk/rp2040/hardware/regs/i2c.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -8,9 +10,83 @@ // Version : 1 // Bus type : apb // Description : DW_apb_i2c address block +// +// List of configuration constants for the Synopsys I2C +// hardware (you may see references to these in I2C register +// header; these are *fixed* values, set at hardware design +// time): +// +// IC_ULTRA_FAST_MODE ................ 0x0 +// IC_UFM_TBUF_CNT_DEFAULT ........... 0x8 +// IC_UFM_SCL_LOW_COUNT .............. 0x0008 +// IC_UFM_SCL_HIGH_COUNT ............. 0x0006 +// IC_TX_TL .......................... 0x0 +// IC_TX_CMD_BLOCK ................... 0x1 +// IC_HAS_DMA ........................ 0x1 +// IC_HAS_ASYNC_FIFO ................. 0x0 +// IC_SMBUS_ARP ...................... 0x0 +// IC_FIRST_DATA_BYTE_STATUS ......... 0x1 +// IC_INTR_IO ........................ 0x1 +// IC_MASTER_MODE .................... 0x1 +// IC_DEFAULT_ACK_GENERAL_CALL ....... 0x1 +// IC_INTR_POL ....................... 0x1 +// IC_OPTIONAL_SAR ................... 0x0 +// IC_DEFAULT_TAR_SLAVE_ADDR ......... 0x055 +// IC_DEFAULT_SLAVE_ADDR ............. 0x055 +// IC_DEFAULT_HS_SPKLEN .............. 0x1 +// IC_FS_SCL_HIGH_COUNT .............. 0x0006 +// IC_HS_SCL_LOW_COUNT ............... 0x0008 +// IC_DEVICE_ID_VALUE ................ 0x0 +// IC_10BITADDR_MASTER ............... 0x0 +// IC_CLK_FREQ_OPTIMIZATION .......... 0x0 +// IC_DEFAULT_FS_SPKLEN .............. 0x7 +// IC_ADD_ENCODED_PARAMS ............. 0x0 +// IC_DEFAULT_SDA_HOLD ............... 0x000001 +// IC_DEFAULT_SDA_SETUP .............. 0x64 +// IC_AVOID_RX_FIFO_FLUSH_ON_TX_ABRT . 0x0 +// IC_CLOCK_PERIOD ................... 100 +// IC_EMPTYFIFO_HOLD_MASTER_EN ....... 1 +// IC_RESTART_EN ..................... 0x1 +// IC_TX_CMD_BLOCK_DEFAULT ........... 0x0 +// IC_BUS_CLEAR_FEATURE .............. 0x0 +// IC_CAP_LOADING .................... 100 +// IC_FS_SCL_LOW_COUNT ............... 0x000d +// APB_DATA_WIDTH .................... 32 +// IC_SDA_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff +// IC_SLV_DATA_NACK_ONLY ............. 0x1 +// IC_10BITADDR_SLAVE ................ 0x0 +// IC_CLK_TYPE ....................... 0x0 +// IC_SMBUS_UDID_MSB ................. 0x0 +// IC_SMBUS_SUSPEND_ALERT ............ 0x0 +// IC_HS_SCL_HIGH_COUNT .............. 0x0006 +// IC_SLV_RESTART_DET_EN ............. 0x1 +// IC_SMBUS .......................... 0x0 +// IC_OPTIONAL_SAR_DEFAULT ........... 0x0 +// IC_PERSISTANT_SLV_ADDR_DEFAULT .... 0x0 +// IC_USE_COUNTS ..................... 0x0 +// IC_RX_BUFFER_DEPTH ................ 16 +// IC_SCL_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff +// IC_RX_FULL_HLD_BUS_EN ............. 0x1 +// IC_SLAVE_DISABLE .................. 0x1 +// IC_RX_TL .......................... 0x0 +// IC_DEVICE_ID ...................... 0x0 +// IC_HC_COUNT_VALUES ................ 0x0 +// I2C_DYNAMIC_TAR_UPDATE ............ 0 +// IC_SMBUS_CLK_LOW_MEXT_DEFAULT ..... 0xffffffff +// IC_SMBUS_CLK_LOW_SEXT_DEFAULT ..... 0xffffffff +// IC_HS_MASTER_CODE ................. 0x1 +// IC_SMBUS_RST_IDLE_CNT_DEFAULT ..... 0xffff +// IC_SMBUS_UDID_LSB_DEFAULT ......... 0xffffffff +// IC_SS_SCL_HIGH_COUNT .............. 0x0028 +// IC_SS_SCL_LOW_COUNT ............... 0x002f +// IC_MAX_SPEED_MODE ................. 0x2 +// IC_STAT_FOR_CLK_STRETCH ........... 0x0 +// IC_STOP_DET_IF_MASTER_ACTIVE ...... 0x0 +// IC_DEFAULT_UFM_SPKLEN ............. 0x1 +// IC_TX_BUFFER_DEPTH ................ 16 // ============================================================================= -#ifndef HARDWARE_REGS_I2C_DEFINED -#define HARDWARE_REGS_I2C_DEFINED +#ifndef _HARDWARE_REGS_I2C_H +#define _HARDWARE_REGS_I2C_H // ============================================================================= // Register : I2C_IC_CON // Description : I2C Control Register. This register can be written only when @@ -42,13 +118,13 @@ // Reset value: 0x0. // 0x0 -> Overflow when RX_FIFO is full // 0x1 -> Hold bus when RX_FIFO is full -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_RESET _u(0x0) -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_BITS _u(0x00000200) -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_MSB _u(9) -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_LSB _u(9) -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_ACCESS "RW" +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_RESET _u(0x0) +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_BITS _u(0x00000200) +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_MSB _u(9) +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_LSB _u(9) +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_ACCESS "RW" #define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_VALUE_DISABLED _u(0x0) -#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_VALUE_ENABLED _u(0x1) +#define I2C_IC_CON_RX_FIFO_FULL_HLD_CTRL_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_TX_EMPTY_CTRL // Description : This bit controls the generation of the TX_EMPTY interrupt, as @@ -57,13 +133,13 @@ // Reset value: 0x0. // 0x0 -> Default behaviour of TX_EMPTY interrupt // 0x1 -> Controlled generation of TX_EMPTY interrupt -#define I2C_IC_CON_TX_EMPTY_CTRL_RESET _u(0x0) -#define I2C_IC_CON_TX_EMPTY_CTRL_BITS _u(0x00000100) -#define I2C_IC_CON_TX_EMPTY_CTRL_MSB _u(8) -#define I2C_IC_CON_TX_EMPTY_CTRL_LSB _u(8) -#define I2C_IC_CON_TX_EMPTY_CTRL_ACCESS "RW" +#define I2C_IC_CON_TX_EMPTY_CTRL_RESET _u(0x0) +#define I2C_IC_CON_TX_EMPTY_CTRL_BITS _u(0x00000100) +#define I2C_IC_CON_TX_EMPTY_CTRL_MSB _u(8) +#define I2C_IC_CON_TX_EMPTY_CTRL_LSB _u(8) +#define I2C_IC_CON_TX_EMPTY_CTRL_ACCESS "RW" #define I2C_IC_CON_TX_EMPTY_CTRL_VALUE_DISABLED _u(0x0) -#define I2C_IC_CON_TX_EMPTY_CTRL_VALUE_ENABLED _u(0x1) +#define I2C_IC_CON_TX_EMPTY_CTRL_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_STOP_DET_IFADDRESSED // Description : In slave mode: - 1'b1: issues the STOP_DET interrupt only when @@ -77,13 +153,13 @@ // transmitted address matches the slave address (SAR). // 0x0 -> slave issues STOP_DET intr always // 0x1 -> slave issues STOP_DET intr only if addressed -#define I2C_IC_CON_STOP_DET_IFADDRESSED_RESET _u(0x0) -#define I2C_IC_CON_STOP_DET_IFADDRESSED_BITS _u(0x00000080) -#define I2C_IC_CON_STOP_DET_IFADDRESSED_MSB _u(7) -#define I2C_IC_CON_STOP_DET_IFADDRESSED_LSB _u(7) -#define I2C_IC_CON_STOP_DET_IFADDRESSED_ACCESS "RW" +#define I2C_IC_CON_STOP_DET_IFADDRESSED_RESET _u(0x0) +#define I2C_IC_CON_STOP_DET_IFADDRESSED_BITS _u(0x00000080) +#define I2C_IC_CON_STOP_DET_IFADDRESSED_MSB _u(7) +#define I2C_IC_CON_STOP_DET_IFADDRESSED_LSB _u(7) +#define I2C_IC_CON_STOP_DET_IFADDRESSED_ACCESS "RW" #define I2C_IC_CON_STOP_DET_IFADDRESSED_VALUE_DISABLED _u(0x0) -#define I2C_IC_CON_STOP_DET_IFADDRESSED_VALUE_ENABLED _u(0x1) +#define I2C_IC_CON_STOP_DET_IFADDRESSED_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_IC_SLAVE_DISABLE // Description : This bit controls whether I2C has its slave disabled, which @@ -98,12 +174,12 @@ // 0, then bit 0 should also be written with a 0. // 0x0 -> Slave mode is enabled // 0x1 -> Slave mode is disabled -#define I2C_IC_CON_IC_SLAVE_DISABLE_RESET _u(0x1) -#define I2C_IC_CON_IC_SLAVE_DISABLE_BITS _u(0x00000040) -#define I2C_IC_CON_IC_SLAVE_DISABLE_MSB _u(6) -#define I2C_IC_CON_IC_SLAVE_DISABLE_LSB _u(6) -#define I2C_IC_CON_IC_SLAVE_DISABLE_ACCESS "RW" -#define I2C_IC_CON_IC_SLAVE_DISABLE_VALUE_SLAVE_ENABLED _u(0x0) +#define I2C_IC_CON_IC_SLAVE_DISABLE_RESET _u(0x1) +#define I2C_IC_CON_IC_SLAVE_DISABLE_BITS _u(0x00000040) +#define I2C_IC_CON_IC_SLAVE_DISABLE_MSB _u(6) +#define I2C_IC_CON_IC_SLAVE_DISABLE_LSB _u(6) +#define I2C_IC_CON_IC_SLAVE_DISABLE_ACCESS "RW" +#define I2C_IC_CON_IC_SLAVE_DISABLE_VALUE_SLAVE_ENABLED _u(0x0) #define I2C_IC_CON_IC_SLAVE_DISABLE_VALUE_SLAVE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_IC_RESTART_EN @@ -112,25 +188,25 @@ // conditions; however, RESTART conditions are used in several // DW_apb_i2c operations. When RESTART is disabled, the master is // prohibited from performing the following functions: - Sending a -// START BYTE - Performing any high-speed mode operation - -// High-speed mode operation - Performing direction changes in -// combined format mode - Performing a read operation with a -// 10-bit address By replacing RESTART condition followed by a -// STOP and a subsequent START condition, split operations are -// broken down into multiple DW_apb_i2c transfers. If the above -// operations are performed, it will result in setting bit 6 -// (TX_ABRT) of the IC_RAW_INTR_STAT register. +// START BYTE - Performing any high-speed mode operation - High- +// speed mode operation - Performing direction changes in combined +// format mode - Performing a read operation with a 10-bit address +// By replacing RESTART condition followed by a STOP and a +// subsequent START condition, split operations are broken down +// into multiple DW_apb_i2c transfers. If the above operations are +// performed, it will result in setting bit 6 (TX_ABRT) of the +// IC_RAW_INTR_STAT register. // // Reset value: ENABLED // 0x0 -> Master restart disabled // 0x1 -> Master restart enabled -#define I2C_IC_CON_IC_RESTART_EN_RESET _u(0x1) -#define I2C_IC_CON_IC_RESTART_EN_BITS _u(0x00000020) -#define I2C_IC_CON_IC_RESTART_EN_MSB _u(5) -#define I2C_IC_CON_IC_RESTART_EN_LSB _u(5) -#define I2C_IC_CON_IC_RESTART_EN_ACCESS "RW" +#define I2C_IC_CON_IC_RESTART_EN_RESET _u(0x1) +#define I2C_IC_CON_IC_RESTART_EN_BITS _u(0x00000020) +#define I2C_IC_CON_IC_RESTART_EN_MSB _u(5) +#define I2C_IC_CON_IC_RESTART_EN_LSB _u(5) +#define I2C_IC_CON_IC_RESTART_EN_ACCESS "RW" #define I2C_IC_CON_IC_RESTART_EN_VALUE_DISABLED _u(0x0) -#define I2C_IC_CON_IC_RESTART_EN_VALUE_ENABLED _u(0x1) +#define I2C_IC_CON_IC_RESTART_EN_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_IC_10BITADDR_MASTER // Description : Controls whether the DW_apb_i2c starts its transfers in 7- or @@ -138,12 +214,12 @@ // addressing - 1: 10-bit addressing // 0x0 -> Master 7Bit addressing mode // 0x1 -> Master 10Bit addressing mode -#define I2C_IC_CON_IC_10BITADDR_MASTER_RESET _u(0x0) -#define I2C_IC_CON_IC_10BITADDR_MASTER_BITS _u(0x00000010) -#define I2C_IC_CON_IC_10BITADDR_MASTER_MSB _u(4) -#define I2C_IC_CON_IC_10BITADDR_MASTER_LSB _u(4) -#define I2C_IC_CON_IC_10BITADDR_MASTER_ACCESS "RW" -#define I2C_IC_CON_IC_10BITADDR_MASTER_VALUE_ADDR_7BITS _u(0x0) +#define I2C_IC_CON_IC_10BITADDR_MASTER_RESET _u(0x0) +#define I2C_IC_CON_IC_10BITADDR_MASTER_BITS _u(0x00000010) +#define I2C_IC_CON_IC_10BITADDR_MASTER_MSB _u(4) +#define I2C_IC_CON_IC_10BITADDR_MASTER_LSB _u(4) +#define I2C_IC_CON_IC_10BITADDR_MASTER_ACCESS "RW" +#define I2C_IC_CON_IC_10BITADDR_MASTER_VALUE_ADDR_7BITS _u(0x0) #define I2C_IC_CON_IC_10BITADDR_MASTER_VALUE_ADDR_10BITS _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_IC_10BITADDR_SLAVE @@ -156,12 +232,12 @@ // that match the full 10 bits of the IC_SAR register. // 0x0 -> Slave 7Bit addressing // 0x1 -> Slave 10Bit addressing -#define I2C_IC_CON_IC_10BITADDR_SLAVE_RESET _u(0x0) -#define I2C_IC_CON_IC_10BITADDR_SLAVE_BITS _u(0x00000008) -#define I2C_IC_CON_IC_10BITADDR_SLAVE_MSB _u(3) -#define I2C_IC_CON_IC_10BITADDR_SLAVE_LSB _u(3) -#define I2C_IC_CON_IC_10BITADDR_SLAVE_ACCESS "RW" -#define I2C_IC_CON_IC_10BITADDR_SLAVE_VALUE_ADDR_7BITS _u(0x0) +#define I2C_IC_CON_IC_10BITADDR_SLAVE_RESET _u(0x0) +#define I2C_IC_CON_IC_10BITADDR_SLAVE_BITS _u(0x00000008) +#define I2C_IC_CON_IC_10BITADDR_SLAVE_MSB _u(3) +#define I2C_IC_CON_IC_10BITADDR_SLAVE_LSB _u(3) +#define I2C_IC_CON_IC_10BITADDR_SLAVE_ACCESS "RW" +#define I2C_IC_CON_IC_10BITADDR_SLAVE_VALUE_ADDR_7BITS _u(0x0) #define I2C_IC_CON_IC_10BITADDR_SLAVE_VALUE_ADDR_10BITS _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_SPEED @@ -186,14 +262,14 @@ // 0x1 -> Standard Speed mode of operation // 0x2 -> Fast or Fast Plus mode of operation // 0x3 -> High Speed mode of operation -#define I2C_IC_CON_SPEED_RESET _u(0x2) -#define I2C_IC_CON_SPEED_BITS _u(0x00000006) -#define I2C_IC_CON_SPEED_MSB _u(2) -#define I2C_IC_CON_SPEED_LSB _u(1) -#define I2C_IC_CON_SPEED_ACCESS "RW" +#define I2C_IC_CON_SPEED_RESET _u(0x2) +#define I2C_IC_CON_SPEED_BITS _u(0x00000006) +#define I2C_IC_CON_SPEED_MSB _u(2) +#define I2C_IC_CON_SPEED_LSB _u(1) +#define I2C_IC_CON_SPEED_ACCESS "RW" #define I2C_IC_CON_SPEED_VALUE_STANDARD _u(0x1) -#define I2C_IC_CON_SPEED_VALUE_FAST _u(0x2) -#define I2C_IC_CON_SPEED_VALUE_HIGH _u(0x3) +#define I2C_IC_CON_SPEED_VALUE_FAST _u(0x2) +#define I2C_IC_CON_SPEED_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : I2C_IC_CON_MASTER_MODE // Description : This bit controls whether the DW_apb_i2c master is enabled. @@ -202,13 +278,13 @@ // '1' then bit 6 should also be written with a '1'. // 0x0 -> Master mode is disabled // 0x1 -> Master mode is enabled -#define I2C_IC_CON_MASTER_MODE_RESET _u(0x1) -#define I2C_IC_CON_MASTER_MODE_BITS _u(0x00000001) -#define I2C_IC_CON_MASTER_MODE_MSB _u(0) -#define I2C_IC_CON_MASTER_MODE_LSB _u(0) -#define I2C_IC_CON_MASTER_MODE_ACCESS "RW" +#define I2C_IC_CON_MASTER_MODE_RESET _u(0x1) +#define I2C_IC_CON_MASTER_MODE_BITS _u(0x00000001) +#define I2C_IC_CON_MASTER_MODE_MSB _u(0) +#define I2C_IC_CON_MASTER_MODE_LSB _u(0) +#define I2C_IC_CON_MASTER_MODE_ACCESS "RW" #define I2C_IC_CON_MASTER_MODE_VALUE_DISABLED _u(0x0) -#define I2C_IC_CON_MASTER_MODE_VALUE_ENABLED _u(0x1) +#define I2C_IC_CON_MASTER_MODE_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_TAR // Description : I2C Target Address Register @@ -233,17 +309,15 @@ // GC_OR_START and use IC_TAR normally - 1: perform special I2C // command as specified in Device_ID or GC_OR_START bit Reset // value: 0x0 -// 0x0 -> Disables programming of GENERAL_CALL or START_BYTE -// transmission -// 0x1 -> Enables programming of GENERAL_CALL or START_BYTE -// transmission -#define I2C_IC_TAR_SPECIAL_RESET _u(0x0) -#define I2C_IC_TAR_SPECIAL_BITS _u(0x00000800) -#define I2C_IC_TAR_SPECIAL_MSB _u(11) -#define I2C_IC_TAR_SPECIAL_LSB _u(11) -#define I2C_IC_TAR_SPECIAL_ACCESS "RW" +// 0x0 -> Disables programming of GENERAL_CALL or START_BYTE transmission +// 0x1 -> Enables programming of GENERAL_CALL or START_BYTE transmission +#define I2C_IC_TAR_SPECIAL_RESET _u(0x0) +#define I2C_IC_TAR_SPECIAL_BITS _u(0x00000800) +#define I2C_IC_TAR_SPECIAL_MSB _u(11) +#define I2C_IC_TAR_SPECIAL_LSB _u(11) +#define I2C_IC_TAR_SPECIAL_ACCESS "RW" #define I2C_IC_TAR_SPECIAL_VALUE_DISABLED _u(0x0) -#define I2C_IC_TAR_SPECIAL_VALUE_ENABLED _u(0x1) +#define I2C_IC_TAR_SPECIAL_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TAR_GC_OR_START // Description : If bit 11 (SPECIAL) is set to 1 and bit 13(Device-ID) is set to @@ -256,13 +330,13 @@ // value (bit 11) is cleared. - 1: START BYTE Reset value: 0x0 // 0x0 -> GENERAL_CALL byte transmission // 0x1 -> START byte transmission -#define I2C_IC_TAR_GC_OR_START_RESET _u(0x0) -#define I2C_IC_TAR_GC_OR_START_BITS _u(0x00000400) -#define I2C_IC_TAR_GC_OR_START_MSB _u(10) -#define I2C_IC_TAR_GC_OR_START_LSB _u(10) -#define I2C_IC_TAR_GC_OR_START_ACCESS "RW" +#define I2C_IC_TAR_GC_OR_START_RESET _u(0x0) +#define I2C_IC_TAR_GC_OR_START_BITS _u(0x00000400) +#define I2C_IC_TAR_GC_OR_START_MSB _u(10) +#define I2C_IC_TAR_GC_OR_START_LSB _u(10) +#define I2C_IC_TAR_GC_OR_START_ACCESS "RW" #define I2C_IC_TAR_GC_OR_START_VALUE_GENERAL_CALL _u(0x0) -#define I2C_IC_TAR_GC_OR_START_VALUE_START_BYTE _u(0x1) +#define I2C_IC_TAR_GC_OR_START_VALUE_START_BYTE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TAR_IC_TAR // Description : This is the target address for any master transaction. When @@ -347,13 +421,13 @@ // FIRST_DATA_BYTE status. // 0x0 -> Sequential data byte received // 0x1 -> Non sequential data byte received -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_RESET _u(0x0) -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_BITS _u(0x00000800) -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_MSB _u(11) -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_LSB _u(11) -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_ACCESS "RO" +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_RESET _u(0x0) +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_BITS _u(0x00000800) +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_MSB _u(11) +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_LSB _u(11) +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_ACCESS "RO" #define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_VALUE_INACTIVE _u(0x0) -#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_VALUE_ACTIVE _u(0x1) +#define I2C_IC_DATA_CMD_FIRST_DATA_BYTE_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_DATA_CMD_RESTART // Description : This bit controls whether a RESTART is issued before the byte @@ -373,13 +447,13 @@ // Reset value: 0x0 // 0x0 -> Don't Issue RESTART before this command // 0x1 -> Issue RESTART before this command -#define I2C_IC_DATA_CMD_RESTART_RESET _u(0x0) -#define I2C_IC_DATA_CMD_RESTART_BITS _u(0x00000400) -#define I2C_IC_DATA_CMD_RESTART_MSB _u(10) -#define I2C_IC_DATA_CMD_RESTART_LSB _u(10) -#define I2C_IC_DATA_CMD_RESTART_ACCESS "SC" +#define I2C_IC_DATA_CMD_RESTART_RESET _u(0x0) +#define I2C_IC_DATA_CMD_RESTART_BITS _u(0x00000400) +#define I2C_IC_DATA_CMD_RESTART_MSB _u(10) +#define I2C_IC_DATA_CMD_RESTART_LSB _u(10) +#define I2C_IC_DATA_CMD_RESTART_ACCESS "SC" #define I2C_IC_DATA_CMD_RESTART_VALUE_DISABLE _u(0x0) -#define I2C_IC_DATA_CMD_RESTART_VALUE_ENABLE _u(0x1) +#define I2C_IC_DATA_CMD_RESTART_VALUE_ENABLE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_DATA_CMD_STOP // Description : This bit controls whether a STOP is issued after the byte is @@ -397,13 +471,13 @@ // is available in the Tx FIFO. Reset value: 0x0 // 0x0 -> Don't Issue STOP after this command // 0x1 -> Issue STOP after this command -#define I2C_IC_DATA_CMD_STOP_RESET _u(0x0) -#define I2C_IC_DATA_CMD_STOP_BITS _u(0x00000200) -#define I2C_IC_DATA_CMD_STOP_MSB _u(9) -#define I2C_IC_DATA_CMD_STOP_LSB _u(9) -#define I2C_IC_DATA_CMD_STOP_ACCESS "SC" +#define I2C_IC_DATA_CMD_STOP_RESET _u(0x0) +#define I2C_IC_DATA_CMD_STOP_BITS _u(0x00000200) +#define I2C_IC_DATA_CMD_STOP_MSB _u(9) +#define I2C_IC_DATA_CMD_STOP_LSB _u(9) +#define I2C_IC_DATA_CMD_STOP_ACCESS "SC" #define I2C_IC_DATA_CMD_STOP_VALUE_DISABLE _u(0x0) -#define I2C_IC_DATA_CMD_STOP_VALUE_ENABLE _u(0x1) +#define I2C_IC_DATA_CMD_STOP_VALUE_ENABLE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_DATA_CMD_CMD // Description : This bit controls whether a read or a write is performed. This @@ -428,13 +502,13 @@ // Reset value: 0x0 // 0x0 -> Master Write Command // 0x1 -> Master Read Command -#define I2C_IC_DATA_CMD_CMD_RESET _u(0x0) -#define I2C_IC_DATA_CMD_CMD_BITS _u(0x00000100) -#define I2C_IC_DATA_CMD_CMD_MSB _u(8) -#define I2C_IC_DATA_CMD_CMD_LSB _u(8) -#define I2C_IC_DATA_CMD_CMD_ACCESS "SC" +#define I2C_IC_DATA_CMD_CMD_RESET _u(0x0) +#define I2C_IC_DATA_CMD_CMD_BITS _u(0x00000100) +#define I2C_IC_DATA_CMD_CMD_MSB _u(8) +#define I2C_IC_DATA_CMD_CMD_LSB _u(8) +#define I2C_IC_DATA_CMD_CMD_ACCESS "SC" #define I2C_IC_DATA_CMD_CMD_VALUE_WRITE _u(0x0) -#define I2C_IC_DATA_CMD_CMD_VALUE_READ _u(0x1) +#define I2C_IC_DATA_CMD_CMD_VALUE_READ _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_DATA_CMD_DAT // Description : This register contains the data to be transmitted or received @@ -552,9 +626,9 @@ // Field : I2C_IC_FS_SCL_LCNT_IC_FS_SCL_LCNT // Description : This register must be set before any I2C bus transaction can // take place to ensure proper I/O timing. This register sets the -// SCL clock low period count for fast speed. It is used in -// high-speed mode to send the Master Code and START BYTE or -// General CALL. For more information, refer to 'IC_CLK Frequency +// SCL clock low period count for fast speed. It is used in high- +// speed mode to send the Master Code and START BYTE or General +// CALL. For more information, refer to 'IC_CLK Frequency // Configuration'. // // This register goes away and becomes read-only returning 0s if @@ -595,13 +669,13 @@ // Reset value: 0x0 // 0x0 -> R_RESTART_DET interrupt is inactive // 0x1 -> R_RESTART_DET interrupt is active -#define I2C_IC_INTR_STAT_R_RESTART_DET_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RESTART_DET_BITS _u(0x00001000) -#define I2C_IC_INTR_STAT_R_RESTART_DET_MSB _u(12) -#define I2C_IC_INTR_STAT_R_RESTART_DET_LSB _u(12) -#define I2C_IC_INTR_STAT_R_RESTART_DET_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RESTART_DET_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RESTART_DET_BITS _u(0x00001000) +#define I2C_IC_INTR_STAT_R_RESTART_DET_MSB _u(12) +#define I2C_IC_INTR_STAT_R_RESTART_DET_LSB _u(12) +#define I2C_IC_INTR_STAT_R_RESTART_DET_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RESTART_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RESTART_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RESTART_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_GEN_CALL // Description : See IC_RAW_INTR_STAT for a detailed description of R_GEN_CALL @@ -610,13 +684,13 @@ // Reset value: 0x0 // 0x0 -> R_GEN_CALL interrupt is inactive // 0x1 -> R_GEN_CALL interrupt is active -#define I2C_IC_INTR_STAT_R_GEN_CALL_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_GEN_CALL_BITS _u(0x00000800) -#define I2C_IC_INTR_STAT_R_GEN_CALL_MSB _u(11) -#define I2C_IC_INTR_STAT_R_GEN_CALL_LSB _u(11) -#define I2C_IC_INTR_STAT_R_GEN_CALL_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_GEN_CALL_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_GEN_CALL_BITS _u(0x00000800) +#define I2C_IC_INTR_STAT_R_GEN_CALL_MSB _u(11) +#define I2C_IC_INTR_STAT_R_GEN_CALL_LSB _u(11) +#define I2C_IC_INTR_STAT_R_GEN_CALL_ACCESS "RO" #define I2C_IC_INTR_STAT_R_GEN_CALL_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_GEN_CALL_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_GEN_CALL_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_START_DET // Description : See IC_RAW_INTR_STAT for a detailed description of R_START_DET @@ -625,13 +699,13 @@ // Reset value: 0x0 // 0x0 -> R_START_DET interrupt is inactive // 0x1 -> R_START_DET interrupt is active -#define I2C_IC_INTR_STAT_R_START_DET_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_START_DET_BITS _u(0x00000400) -#define I2C_IC_INTR_STAT_R_START_DET_MSB _u(10) -#define I2C_IC_INTR_STAT_R_START_DET_LSB _u(10) -#define I2C_IC_INTR_STAT_R_START_DET_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_START_DET_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_START_DET_BITS _u(0x00000400) +#define I2C_IC_INTR_STAT_R_START_DET_MSB _u(10) +#define I2C_IC_INTR_STAT_R_START_DET_LSB _u(10) +#define I2C_IC_INTR_STAT_R_START_DET_ACCESS "RO" #define I2C_IC_INTR_STAT_R_START_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_START_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_START_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_STOP_DET // Description : See IC_RAW_INTR_STAT for a detailed description of R_STOP_DET @@ -640,13 +714,13 @@ // Reset value: 0x0 // 0x0 -> R_STOP_DET interrupt is inactive // 0x1 -> R_STOP_DET interrupt is active -#define I2C_IC_INTR_STAT_R_STOP_DET_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_STOP_DET_BITS _u(0x00000200) -#define I2C_IC_INTR_STAT_R_STOP_DET_MSB _u(9) -#define I2C_IC_INTR_STAT_R_STOP_DET_LSB _u(9) -#define I2C_IC_INTR_STAT_R_STOP_DET_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_STOP_DET_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_STOP_DET_BITS _u(0x00000200) +#define I2C_IC_INTR_STAT_R_STOP_DET_MSB _u(9) +#define I2C_IC_INTR_STAT_R_STOP_DET_LSB _u(9) +#define I2C_IC_INTR_STAT_R_STOP_DET_ACCESS "RO" #define I2C_IC_INTR_STAT_R_STOP_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_STOP_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_STOP_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_ACTIVITY // Description : See IC_RAW_INTR_STAT for a detailed description of R_ACTIVITY @@ -655,13 +729,13 @@ // Reset value: 0x0 // 0x0 -> R_ACTIVITY interrupt is inactive // 0x1 -> R_ACTIVITY interrupt is active -#define I2C_IC_INTR_STAT_R_ACTIVITY_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_ACTIVITY_BITS _u(0x00000100) -#define I2C_IC_INTR_STAT_R_ACTIVITY_MSB _u(8) -#define I2C_IC_INTR_STAT_R_ACTIVITY_LSB _u(8) -#define I2C_IC_INTR_STAT_R_ACTIVITY_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_ACTIVITY_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_ACTIVITY_BITS _u(0x00000100) +#define I2C_IC_INTR_STAT_R_ACTIVITY_MSB _u(8) +#define I2C_IC_INTR_STAT_R_ACTIVITY_LSB _u(8) +#define I2C_IC_INTR_STAT_R_ACTIVITY_ACCESS "RO" #define I2C_IC_INTR_STAT_R_ACTIVITY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_ACTIVITY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_ACTIVITY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_RX_DONE // Description : See IC_RAW_INTR_STAT for a detailed description of R_RX_DONE @@ -670,13 +744,13 @@ // Reset value: 0x0 // 0x0 -> R_RX_DONE interrupt is inactive // 0x1 -> R_RX_DONE interrupt is active -#define I2C_IC_INTR_STAT_R_RX_DONE_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_DONE_BITS _u(0x00000080) -#define I2C_IC_INTR_STAT_R_RX_DONE_MSB _u(7) -#define I2C_IC_INTR_STAT_R_RX_DONE_LSB _u(7) -#define I2C_IC_INTR_STAT_R_RX_DONE_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RX_DONE_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RX_DONE_BITS _u(0x00000080) +#define I2C_IC_INTR_STAT_R_RX_DONE_MSB _u(7) +#define I2C_IC_INTR_STAT_R_RX_DONE_LSB _u(7) +#define I2C_IC_INTR_STAT_R_RX_DONE_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RX_DONE_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_DONE_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RX_DONE_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_TX_ABRT // Description : See IC_RAW_INTR_STAT for a detailed description of R_TX_ABRT @@ -685,13 +759,13 @@ // Reset value: 0x0 // 0x0 -> R_TX_ABRT interrupt is inactive // 0x1 -> R_TX_ABRT interrupt is active -#define I2C_IC_INTR_STAT_R_TX_ABRT_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_ABRT_BITS _u(0x00000040) -#define I2C_IC_INTR_STAT_R_TX_ABRT_MSB _u(6) -#define I2C_IC_INTR_STAT_R_TX_ABRT_LSB _u(6) -#define I2C_IC_INTR_STAT_R_TX_ABRT_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_TX_ABRT_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_TX_ABRT_BITS _u(0x00000040) +#define I2C_IC_INTR_STAT_R_TX_ABRT_MSB _u(6) +#define I2C_IC_INTR_STAT_R_TX_ABRT_LSB _u(6) +#define I2C_IC_INTR_STAT_R_TX_ABRT_ACCESS "RO" #define I2C_IC_INTR_STAT_R_TX_ABRT_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_ABRT_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_TX_ABRT_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_RD_REQ // Description : See IC_RAW_INTR_STAT for a detailed description of R_RD_REQ @@ -700,13 +774,13 @@ // Reset value: 0x0 // 0x0 -> R_RD_REQ interrupt is inactive // 0x1 -> R_RD_REQ interrupt is active -#define I2C_IC_INTR_STAT_R_RD_REQ_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RD_REQ_BITS _u(0x00000020) -#define I2C_IC_INTR_STAT_R_RD_REQ_MSB _u(5) -#define I2C_IC_INTR_STAT_R_RD_REQ_LSB _u(5) -#define I2C_IC_INTR_STAT_R_RD_REQ_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RD_REQ_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RD_REQ_BITS _u(0x00000020) +#define I2C_IC_INTR_STAT_R_RD_REQ_MSB _u(5) +#define I2C_IC_INTR_STAT_R_RD_REQ_LSB _u(5) +#define I2C_IC_INTR_STAT_R_RD_REQ_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RD_REQ_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RD_REQ_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RD_REQ_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_TX_EMPTY // Description : See IC_RAW_INTR_STAT for a detailed description of R_TX_EMPTY @@ -715,13 +789,13 @@ // Reset value: 0x0 // 0x0 -> R_TX_EMPTY interrupt is inactive // 0x1 -> R_TX_EMPTY interrupt is active -#define I2C_IC_INTR_STAT_R_TX_EMPTY_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_EMPTY_BITS _u(0x00000010) -#define I2C_IC_INTR_STAT_R_TX_EMPTY_MSB _u(4) -#define I2C_IC_INTR_STAT_R_TX_EMPTY_LSB _u(4) -#define I2C_IC_INTR_STAT_R_TX_EMPTY_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_TX_EMPTY_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_TX_EMPTY_BITS _u(0x00000010) +#define I2C_IC_INTR_STAT_R_TX_EMPTY_MSB _u(4) +#define I2C_IC_INTR_STAT_R_TX_EMPTY_LSB _u(4) +#define I2C_IC_INTR_STAT_R_TX_EMPTY_ACCESS "RO" #define I2C_IC_INTR_STAT_R_TX_EMPTY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_EMPTY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_TX_EMPTY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_TX_OVER // Description : See IC_RAW_INTR_STAT for a detailed description of R_TX_OVER @@ -730,13 +804,13 @@ // Reset value: 0x0 // 0x0 -> R_TX_OVER interrupt is inactive // 0x1 -> R_TX_OVER interrupt is active -#define I2C_IC_INTR_STAT_R_TX_OVER_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_OVER_BITS _u(0x00000008) -#define I2C_IC_INTR_STAT_R_TX_OVER_MSB _u(3) -#define I2C_IC_INTR_STAT_R_TX_OVER_LSB _u(3) -#define I2C_IC_INTR_STAT_R_TX_OVER_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_TX_OVER_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_TX_OVER_BITS _u(0x00000008) +#define I2C_IC_INTR_STAT_R_TX_OVER_MSB _u(3) +#define I2C_IC_INTR_STAT_R_TX_OVER_LSB _u(3) +#define I2C_IC_INTR_STAT_R_TX_OVER_ACCESS "RO" #define I2C_IC_INTR_STAT_R_TX_OVER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_TX_OVER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_TX_OVER_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_RX_FULL // Description : See IC_RAW_INTR_STAT for a detailed description of R_RX_FULL @@ -745,13 +819,13 @@ // Reset value: 0x0 // 0x0 -> R_RX_FULL interrupt is inactive // 0x1 -> R_RX_FULL interrupt is active -#define I2C_IC_INTR_STAT_R_RX_FULL_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_FULL_BITS _u(0x00000004) -#define I2C_IC_INTR_STAT_R_RX_FULL_MSB _u(2) -#define I2C_IC_INTR_STAT_R_RX_FULL_LSB _u(2) -#define I2C_IC_INTR_STAT_R_RX_FULL_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RX_FULL_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RX_FULL_BITS _u(0x00000004) +#define I2C_IC_INTR_STAT_R_RX_FULL_MSB _u(2) +#define I2C_IC_INTR_STAT_R_RX_FULL_LSB _u(2) +#define I2C_IC_INTR_STAT_R_RX_FULL_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RX_FULL_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_FULL_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RX_FULL_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_RX_OVER // Description : See IC_RAW_INTR_STAT for a detailed description of R_RX_OVER @@ -760,13 +834,13 @@ // Reset value: 0x0 // 0x0 -> R_RX_OVER interrupt is inactive // 0x1 -> R_RX_OVER interrupt is active -#define I2C_IC_INTR_STAT_R_RX_OVER_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_OVER_BITS _u(0x00000002) -#define I2C_IC_INTR_STAT_R_RX_OVER_MSB _u(1) -#define I2C_IC_INTR_STAT_R_RX_OVER_LSB _u(1) -#define I2C_IC_INTR_STAT_R_RX_OVER_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RX_OVER_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RX_OVER_BITS _u(0x00000002) +#define I2C_IC_INTR_STAT_R_RX_OVER_MSB _u(1) +#define I2C_IC_INTR_STAT_R_RX_OVER_LSB _u(1) +#define I2C_IC_INTR_STAT_R_RX_OVER_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RX_OVER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_OVER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RX_OVER_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_STAT_R_RX_UNDER // Description : See IC_RAW_INTR_STAT for a detailed description of R_RX_UNDER @@ -775,13 +849,13 @@ // Reset value: 0x0 // 0x0 -> RX_UNDER interrupt is inactive // 0x1 -> RX_UNDER interrupt is active -#define I2C_IC_INTR_STAT_R_RX_UNDER_RESET _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_UNDER_BITS _u(0x00000001) -#define I2C_IC_INTR_STAT_R_RX_UNDER_MSB _u(0) -#define I2C_IC_INTR_STAT_R_RX_UNDER_LSB _u(0) -#define I2C_IC_INTR_STAT_R_RX_UNDER_ACCESS "RO" +#define I2C_IC_INTR_STAT_R_RX_UNDER_RESET _u(0x0) +#define I2C_IC_INTR_STAT_R_RX_UNDER_BITS _u(0x00000001) +#define I2C_IC_INTR_STAT_R_RX_UNDER_MSB _u(0) +#define I2C_IC_INTR_STAT_R_RX_UNDER_LSB _u(0) +#define I2C_IC_INTR_STAT_R_RX_UNDER_ACCESS "RO" #define I2C_IC_INTR_STAT_R_RX_UNDER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_INTR_STAT_R_RX_UNDER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_INTR_STAT_R_RX_UNDER_VALUE_ACTIVE _u(0x1) // ============================================================================= // Register : I2C_IC_INTR_MASK // Description : I2C Interrupt Mask Register. @@ -800,12 +874,12 @@ // Reset value: 0x0 // 0x0 -> RESTART_DET interrupt is masked // 0x1 -> RESTART_DET interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RESTART_DET_RESET _u(0x0) -#define I2C_IC_INTR_MASK_M_RESTART_DET_BITS _u(0x00001000) -#define I2C_IC_INTR_MASK_M_RESTART_DET_MSB _u(12) -#define I2C_IC_INTR_MASK_M_RESTART_DET_LSB _u(12) -#define I2C_IC_INTR_MASK_M_RESTART_DET_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RESTART_DET_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RESTART_DET_RESET _u(0x0) +#define I2C_IC_INTR_MASK_M_RESTART_DET_BITS _u(0x00001000) +#define I2C_IC_INTR_MASK_M_RESTART_DET_MSB _u(12) +#define I2C_IC_INTR_MASK_M_RESTART_DET_LSB _u(12) +#define I2C_IC_INTR_MASK_M_RESTART_DET_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RESTART_DET_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RESTART_DET_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_GEN_CALL @@ -815,12 +889,12 @@ // Reset value: 0x1 // 0x0 -> GEN_CALL interrupt is masked // 0x1 -> GEN_CALL interrupt is unmasked -#define I2C_IC_INTR_MASK_M_GEN_CALL_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_GEN_CALL_BITS _u(0x00000800) -#define I2C_IC_INTR_MASK_M_GEN_CALL_MSB _u(11) -#define I2C_IC_INTR_MASK_M_GEN_CALL_LSB _u(11) -#define I2C_IC_INTR_MASK_M_GEN_CALL_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_GEN_CALL_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_GEN_CALL_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_GEN_CALL_BITS _u(0x00000800) +#define I2C_IC_INTR_MASK_M_GEN_CALL_MSB _u(11) +#define I2C_IC_INTR_MASK_M_GEN_CALL_LSB _u(11) +#define I2C_IC_INTR_MASK_M_GEN_CALL_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_GEN_CALL_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_GEN_CALL_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_START_DET @@ -830,12 +904,12 @@ // Reset value: 0x0 // 0x0 -> START_DET interrupt is masked // 0x1 -> START_DET interrupt is unmasked -#define I2C_IC_INTR_MASK_M_START_DET_RESET _u(0x0) -#define I2C_IC_INTR_MASK_M_START_DET_BITS _u(0x00000400) -#define I2C_IC_INTR_MASK_M_START_DET_MSB _u(10) -#define I2C_IC_INTR_MASK_M_START_DET_LSB _u(10) -#define I2C_IC_INTR_MASK_M_START_DET_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_START_DET_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_START_DET_RESET _u(0x0) +#define I2C_IC_INTR_MASK_M_START_DET_BITS _u(0x00000400) +#define I2C_IC_INTR_MASK_M_START_DET_MSB _u(10) +#define I2C_IC_INTR_MASK_M_START_DET_LSB _u(10) +#define I2C_IC_INTR_MASK_M_START_DET_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_START_DET_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_START_DET_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_STOP_DET @@ -845,12 +919,12 @@ // Reset value: 0x0 // 0x0 -> STOP_DET interrupt is masked // 0x1 -> STOP_DET interrupt is unmasked -#define I2C_IC_INTR_MASK_M_STOP_DET_RESET _u(0x0) -#define I2C_IC_INTR_MASK_M_STOP_DET_BITS _u(0x00000200) -#define I2C_IC_INTR_MASK_M_STOP_DET_MSB _u(9) -#define I2C_IC_INTR_MASK_M_STOP_DET_LSB _u(9) -#define I2C_IC_INTR_MASK_M_STOP_DET_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_STOP_DET_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_STOP_DET_RESET _u(0x0) +#define I2C_IC_INTR_MASK_M_STOP_DET_BITS _u(0x00000200) +#define I2C_IC_INTR_MASK_M_STOP_DET_MSB _u(9) +#define I2C_IC_INTR_MASK_M_STOP_DET_LSB _u(9) +#define I2C_IC_INTR_MASK_M_STOP_DET_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_STOP_DET_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_STOP_DET_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_ACTIVITY @@ -860,12 +934,12 @@ // Reset value: 0x0 // 0x0 -> ACTIVITY interrupt is masked // 0x1 -> ACTIVITY interrupt is unmasked -#define I2C_IC_INTR_MASK_M_ACTIVITY_RESET _u(0x0) -#define I2C_IC_INTR_MASK_M_ACTIVITY_BITS _u(0x00000100) -#define I2C_IC_INTR_MASK_M_ACTIVITY_MSB _u(8) -#define I2C_IC_INTR_MASK_M_ACTIVITY_LSB _u(8) -#define I2C_IC_INTR_MASK_M_ACTIVITY_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_ACTIVITY_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_ACTIVITY_RESET _u(0x0) +#define I2C_IC_INTR_MASK_M_ACTIVITY_BITS _u(0x00000100) +#define I2C_IC_INTR_MASK_M_ACTIVITY_MSB _u(8) +#define I2C_IC_INTR_MASK_M_ACTIVITY_LSB _u(8) +#define I2C_IC_INTR_MASK_M_ACTIVITY_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_ACTIVITY_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_ACTIVITY_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_RX_DONE @@ -875,12 +949,12 @@ // Reset value: 0x1 // 0x0 -> RX_DONE interrupt is masked // 0x1 -> RX_DONE interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RX_DONE_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_RX_DONE_BITS _u(0x00000080) -#define I2C_IC_INTR_MASK_M_RX_DONE_MSB _u(7) -#define I2C_IC_INTR_MASK_M_RX_DONE_LSB _u(7) -#define I2C_IC_INTR_MASK_M_RX_DONE_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RX_DONE_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RX_DONE_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_RX_DONE_BITS _u(0x00000080) +#define I2C_IC_INTR_MASK_M_RX_DONE_MSB _u(7) +#define I2C_IC_INTR_MASK_M_RX_DONE_LSB _u(7) +#define I2C_IC_INTR_MASK_M_RX_DONE_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RX_DONE_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RX_DONE_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_TX_ABRT @@ -890,12 +964,12 @@ // Reset value: 0x1 // 0x0 -> TX_ABORT interrupt is masked // 0x1 -> TX_ABORT interrupt is unmasked -#define I2C_IC_INTR_MASK_M_TX_ABRT_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_TX_ABRT_BITS _u(0x00000040) -#define I2C_IC_INTR_MASK_M_TX_ABRT_MSB _u(6) -#define I2C_IC_INTR_MASK_M_TX_ABRT_LSB _u(6) -#define I2C_IC_INTR_MASK_M_TX_ABRT_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_TX_ABRT_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_TX_ABRT_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_TX_ABRT_BITS _u(0x00000040) +#define I2C_IC_INTR_MASK_M_TX_ABRT_MSB _u(6) +#define I2C_IC_INTR_MASK_M_TX_ABRT_LSB _u(6) +#define I2C_IC_INTR_MASK_M_TX_ABRT_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_TX_ABRT_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_TX_ABRT_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_RD_REQ @@ -904,12 +978,12 @@ // Reset value: 0x1 // 0x0 -> RD_REQ interrupt is masked // 0x1 -> RD_REQ interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RD_REQ_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_RD_REQ_BITS _u(0x00000020) -#define I2C_IC_INTR_MASK_M_RD_REQ_MSB _u(5) -#define I2C_IC_INTR_MASK_M_RD_REQ_LSB _u(5) -#define I2C_IC_INTR_MASK_M_RD_REQ_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RD_REQ_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RD_REQ_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_RD_REQ_BITS _u(0x00000020) +#define I2C_IC_INTR_MASK_M_RD_REQ_MSB _u(5) +#define I2C_IC_INTR_MASK_M_RD_REQ_LSB _u(5) +#define I2C_IC_INTR_MASK_M_RD_REQ_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RD_REQ_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RD_REQ_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_TX_EMPTY @@ -919,12 +993,12 @@ // Reset value: 0x1 // 0x0 -> TX_EMPTY interrupt is masked // 0x1 -> TX_EMPTY interrupt is unmasked -#define I2C_IC_INTR_MASK_M_TX_EMPTY_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_TX_EMPTY_BITS _u(0x00000010) -#define I2C_IC_INTR_MASK_M_TX_EMPTY_MSB _u(4) -#define I2C_IC_INTR_MASK_M_TX_EMPTY_LSB _u(4) -#define I2C_IC_INTR_MASK_M_TX_EMPTY_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_TX_EMPTY_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_TX_EMPTY_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_TX_EMPTY_BITS _u(0x00000010) +#define I2C_IC_INTR_MASK_M_TX_EMPTY_MSB _u(4) +#define I2C_IC_INTR_MASK_M_TX_EMPTY_LSB _u(4) +#define I2C_IC_INTR_MASK_M_TX_EMPTY_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_TX_EMPTY_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_TX_EMPTY_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_TX_OVER @@ -934,12 +1008,12 @@ // Reset value: 0x1 // 0x0 -> TX_OVER interrupt is masked // 0x1 -> TX_OVER interrupt is unmasked -#define I2C_IC_INTR_MASK_M_TX_OVER_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_TX_OVER_BITS _u(0x00000008) -#define I2C_IC_INTR_MASK_M_TX_OVER_MSB _u(3) -#define I2C_IC_INTR_MASK_M_TX_OVER_LSB _u(3) -#define I2C_IC_INTR_MASK_M_TX_OVER_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_TX_OVER_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_TX_OVER_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_TX_OVER_BITS _u(0x00000008) +#define I2C_IC_INTR_MASK_M_TX_OVER_MSB _u(3) +#define I2C_IC_INTR_MASK_M_TX_OVER_LSB _u(3) +#define I2C_IC_INTR_MASK_M_TX_OVER_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_TX_OVER_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_TX_OVER_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_RX_FULL @@ -949,12 +1023,12 @@ // Reset value: 0x1 // 0x0 -> RX_FULL interrupt is masked // 0x1 -> RX_FULL interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RX_FULL_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_RX_FULL_BITS _u(0x00000004) -#define I2C_IC_INTR_MASK_M_RX_FULL_MSB _u(2) -#define I2C_IC_INTR_MASK_M_RX_FULL_LSB _u(2) -#define I2C_IC_INTR_MASK_M_RX_FULL_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RX_FULL_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RX_FULL_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_RX_FULL_BITS _u(0x00000004) +#define I2C_IC_INTR_MASK_M_RX_FULL_MSB _u(2) +#define I2C_IC_INTR_MASK_M_RX_FULL_LSB _u(2) +#define I2C_IC_INTR_MASK_M_RX_FULL_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RX_FULL_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RX_FULL_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_RX_OVER @@ -964,12 +1038,12 @@ // Reset value: 0x1 // 0x0 -> RX_OVER interrupt is masked // 0x1 -> RX_OVER interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RX_OVER_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_RX_OVER_BITS _u(0x00000002) -#define I2C_IC_INTR_MASK_M_RX_OVER_MSB _u(1) -#define I2C_IC_INTR_MASK_M_RX_OVER_LSB _u(1) -#define I2C_IC_INTR_MASK_M_RX_OVER_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RX_OVER_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RX_OVER_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_RX_OVER_BITS _u(0x00000002) +#define I2C_IC_INTR_MASK_M_RX_OVER_MSB _u(1) +#define I2C_IC_INTR_MASK_M_RX_OVER_LSB _u(1) +#define I2C_IC_INTR_MASK_M_RX_OVER_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RX_OVER_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RX_OVER_VALUE_DISABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_INTR_MASK_M_RX_UNDER @@ -979,12 +1053,12 @@ // Reset value: 0x1 // 0x0 -> RX_UNDER interrupt is masked // 0x1 -> RX_UNDER interrupt is unmasked -#define I2C_IC_INTR_MASK_M_RX_UNDER_RESET _u(0x1) -#define I2C_IC_INTR_MASK_M_RX_UNDER_BITS _u(0x00000001) -#define I2C_IC_INTR_MASK_M_RX_UNDER_MSB _u(0) -#define I2C_IC_INTR_MASK_M_RX_UNDER_LSB _u(0) -#define I2C_IC_INTR_MASK_M_RX_UNDER_ACCESS "RW" -#define I2C_IC_INTR_MASK_M_RX_UNDER_VALUE_ENABLED _u(0x0) +#define I2C_IC_INTR_MASK_M_RX_UNDER_RESET _u(0x1) +#define I2C_IC_INTR_MASK_M_RX_UNDER_BITS _u(0x00000001) +#define I2C_IC_INTR_MASK_M_RX_UNDER_MSB _u(0) +#define I2C_IC_INTR_MASK_M_RX_UNDER_LSB _u(0) +#define I2C_IC_INTR_MASK_M_RX_UNDER_ACCESS "RW" +#define I2C_IC_INTR_MASK_M_RX_UNDER_VALUE_ENABLED _u(0x0) #define I2C_IC_INTR_MASK_M_RX_UNDER_VALUE_DISABLED _u(0x1) // ============================================================================= // Register : I2C_IC_RAW_INTR_STAT @@ -1011,13 +1085,13 @@ // Reset value: 0x0 // 0x0 -> RESTART_DET interrupt is inactive // 0x1 -> RESTART_DET interrupt is active -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_BITS _u(0x00001000) -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_MSB _u(12) -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_LSB _u(12) -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_BITS _u(0x00001000) +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_MSB _u(12) +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_LSB _u(12) +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RESTART_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RESTART_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RESTART_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_GEN_CALL // Description : Set only when a General Call address is received and it is @@ -1029,13 +1103,13 @@ // Reset value: 0x0 // 0x0 -> GEN_CALL interrupt is inactive // 0x1 -> GEN_CALL interrupt is active -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_BITS _u(0x00000800) -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_MSB _u(11) -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_LSB _u(11) -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_BITS _u(0x00000800) +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_MSB _u(11) +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_LSB _u(11) +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_GEN_CALL_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_GEN_CALL_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_GEN_CALL_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_START_DET // Description : Indicates whether a START or RESTART condition has occurred on @@ -1045,13 +1119,13 @@ // Reset value: 0x0 // 0x0 -> START_DET interrupt is inactive // 0x1 -> START_DET interrupt is active -#define I2C_IC_RAW_INTR_STAT_START_DET_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_START_DET_BITS _u(0x00000400) -#define I2C_IC_RAW_INTR_STAT_START_DET_MSB _u(10) -#define I2C_IC_RAW_INTR_STAT_START_DET_LSB _u(10) -#define I2C_IC_RAW_INTR_STAT_START_DET_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_START_DET_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_START_DET_BITS _u(0x00000400) +#define I2C_IC_RAW_INTR_STAT_START_DET_MSB _u(10) +#define I2C_IC_RAW_INTR_STAT_START_DET_LSB _u(10) +#define I2C_IC_RAW_INTR_STAT_START_DET_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_START_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_START_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_START_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_STOP_DET // Description : Indicates whether a STOP condition has occurred on the I2C @@ -1074,13 +1148,13 @@ // Reset value: 0x0 // 0x0 -> STOP_DET interrupt is inactive // 0x1 -> STOP_DET interrupt is active -#define I2C_IC_RAW_INTR_STAT_STOP_DET_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_STOP_DET_BITS _u(0x00000200) -#define I2C_IC_RAW_INTR_STAT_STOP_DET_MSB _u(9) -#define I2C_IC_RAW_INTR_STAT_STOP_DET_LSB _u(9) -#define I2C_IC_RAW_INTR_STAT_STOP_DET_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_STOP_DET_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_STOP_DET_BITS _u(0x00000200) +#define I2C_IC_RAW_INTR_STAT_STOP_DET_MSB _u(9) +#define I2C_IC_RAW_INTR_STAT_STOP_DET_LSB _u(9) +#define I2C_IC_RAW_INTR_STAT_STOP_DET_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_STOP_DET_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_STOP_DET_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_STOP_DET_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_ACTIVITY // Description : This bit captures DW_apb_i2c activity and stays set until it is @@ -1094,13 +1168,13 @@ // Reset value: 0x0 // 0x0 -> RAW_INTR_ACTIVITY interrupt is inactive // 0x1 -> RAW_INTR_ACTIVITY interrupt is active -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_BITS _u(0x00000100) -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_MSB _u(8) -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_LSB _u(8) -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_BITS _u(0x00000100) +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_MSB _u(8) +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_LSB _u(8) +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_ACTIVITY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_ACTIVITY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_ACTIVITY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_RX_DONE // Description : When the DW_apb_i2c is acting as a slave-transmitter, this bit @@ -1111,13 +1185,13 @@ // Reset value: 0x0 // 0x0 -> RX_DONE interrupt is inactive // 0x1 -> RX_DONE interrupt is active -#define I2C_IC_RAW_INTR_STAT_RX_DONE_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_DONE_BITS _u(0x00000080) -#define I2C_IC_RAW_INTR_STAT_RX_DONE_MSB _u(7) -#define I2C_IC_RAW_INTR_STAT_RX_DONE_LSB _u(7) -#define I2C_IC_RAW_INTR_STAT_RX_DONE_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RX_DONE_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RX_DONE_BITS _u(0x00000080) +#define I2C_IC_RAW_INTR_STAT_RX_DONE_MSB _u(7) +#define I2C_IC_RAW_INTR_STAT_RX_DONE_LSB _u(7) +#define I2C_IC_RAW_INTR_STAT_RX_DONE_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RX_DONE_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_DONE_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RX_DONE_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_TX_ABRT // Description : This bit indicates if DW_apb_i2c, as an I2C transmitter, is @@ -1137,13 +1211,13 @@ // Reset value: 0x0 // 0x0 -> TX_ABRT interrupt is inactive // 0x1 -> TX_ABRT interrupt is active -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_BITS _u(0x00000040) -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_MSB _u(6) -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_LSB _u(6) -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_BITS _u(0x00000040) +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_MSB _u(6) +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_LSB _u(6) +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_TX_ABRT_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_ABRT_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_TX_ABRT_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_RD_REQ // Description : This bit is set to 1 when DW_apb_i2c is acting as a slave and @@ -1159,13 +1233,13 @@ // Reset value: 0x0 // 0x0 -> RD_REQ interrupt is inactive // 0x1 -> RD_REQ interrupt is active -#define I2C_IC_RAW_INTR_STAT_RD_REQ_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RD_REQ_BITS _u(0x00000020) -#define I2C_IC_RAW_INTR_STAT_RD_REQ_MSB _u(5) -#define I2C_IC_RAW_INTR_STAT_RD_REQ_LSB _u(5) -#define I2C_IC_RAW_INTR_STAT_RD_REQ_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RD_REQ_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RD_REQ_BITS _u(0x00000020) +#define I2C_IC_RAW_INTR_STAT_RD_REQ_MSB _u(5) +#define I2C_IC_RAW_INTR_STAT_RD_REQ_LSB _u(5) +#define I2C_IC_RAW_INTR_STAT_RD_REQ_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RD_REQ_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RD_REQ_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RD_REQ_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_TX_EMPTY // Description : The behavior of the TX_EMPTY interrupt status differs based on @@ -1187,13 +1261,13 @@ // Reset value: 0x0. // 0x0 -> TX_EMPTY interrupt is inactive // 0x1 -> TX_EMPTY interrupt is active -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_BITS _u(0x00000010) -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_MSB _u(4) -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_LSB _u(4) -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_BITS _u(0x00000010) +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_MSB _u(4) +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_LSB _u(4) +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_TX_EMPTY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_TX_EMPTY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_TX_OVER // Description : Set during transmit if the transmit buffer is filled to @@ -1206,13 +1280,13 @@ // Reset value: 0x0 // 0x0 -> TX_OVER interrupt is inactive // 0x1 -> TX_OVER interrupt is active -#define I2C_IC_RAW_INTR_STAT_TX_OVER_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_OVER_BITS _u(0x00000008) -#define I2C_IC_RAW_INTR_STAT_TX_OVER_MSB _u(3) -#define I2C_IC_RAW_INTR_STAT_TX_OVER_LSB _u(3) -#define I2C_IC_RAW_INTR_STAT_TX_OVER_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_TX_OVER_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_TX_OVER_BITS _u(0x00000008) +#define I2C_IC_RAW_INTR_STAT_TX_OVER_MSB _u(3) +#define I2C_IC_RAW_INTR_STAT_TX_OVER_LSB _u(3) +#define I2C_IC_RAW_INTR_STAT_TX_OVER_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_TX_OVER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_TX_OVER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_TX_OVER_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_RX_FULL // Description : Set when the receive buffer reaches or goes above the RX_TL @@ -1226,13 +1300,13 @@ // Reset value: 0x0 // 0x0 -> RX_FULL interrupt is inactive // 0x1 -> RX_FULL interrupt is active -#define I2C_IC_RAW_INTR_STAT_RX_FULL_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_FULL_BITS _u(0x00000004) -#define I2C_IC_RAW_INTR_STAT_RX_FULL_MSB _u(2) -#define I2C_IC_RAW_INTR_STAT_RX_FULL_LSB _u(2) -#define I2C_IC_RAW_INTR_STAT_RX_FULL_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RX_FULL_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RX_FULL_BITS _u(0x00000004) +#define I2C_IC_RAW_INTR_STAT_RX_FULL_MSB _u(2) +#define I2C_IC_RAW_INTR_STAT_RX_FULL_LSB _u(2) +#define I2C_IC_RAW_INTR_STAT_RX_FULL_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RX_FULL_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_FULL_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RX_FULL_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_RX_OVER // Description : Set if the receive buffer is completely filled to @@ -1250,13 +1324,13 @@ // Reset value: 0x0 // 0x0 -> RX_OVER interrupt is inactive // 0x1 -> RX_OVER interrupt is active -#define I2C_IC_RAW_INTR_STAT_RX_OVER_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_OVER_BITS _u(0x00000002) -#define I2C_IC_RAW_INTR_STAT_RX_OVER_MSB _u(1) -#define I2C_IC_RAW_INTR_STAT_RX_OVER_LSB _u(1) -#define I2C_IC_RAW_INTR_STAT_RX_OVER_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RX_OVER_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RX_OVER_BITS _u(0x00000002) +#define I2C_IC_RAW_INTR_STAT_RX_OVER_MSB _u(1) +#define I2C_IC_RAW_INTR_STAT_RX_OVER_LSB _u(1) +#define I2C_IC_RAW_INTR_STAT_RX_OVER_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RX_OVER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_OVER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RX_OVER_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_RAW_INTR_STAT_RX_UNDER // Description : Set if the processor attempts to read the receive buffer when @@ -1268,13 +1342,13 @@ // Reset value: 0x0 // 0x0 -> RX_UNDER interrupt is inactive // 0x1 -> RX_UNDER interrupt is active -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_RESET _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_BITS _u(0x00000001) -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_MSB _u(0) -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_LSB _u(0) -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_ACCESS "RO" +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_RESET _u(0x0) +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_BITS _u(0x00000001) +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_MSB _u(0) +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_LSB _u(0) +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_ACCESS "RO" #define I2C_IC_RAW_INTR_STAT_RX_UNDER_VALUE_INACTIVE _u(0x0) -#define I2C_IC_RAW_INTR_STAT_RX_UNDER_VALUE_ACTIVE _u(0x1) +#define I2C_IC_RAW_INTR_STAT_RX_UNDER_VALUE_ACTIVE _u(0x1) // ============================================================================= // Register : I2C_IC_RX_TL // Description : I2C Receive FIFO Threshold Register @@ -1539,13 +1613,13 @@ // value: IC_TX_CMD_BLOCK_DEFAULT // 0x0 -> Tx Command execution not blocked // 0x1 -> Tx Command execution blocked -#define I2C_IC_ENABLE_TX_CMD_BLOCK_RESET _u(0x0) -#define I2C_IC_ENABLE_TX_CMD_BLOCK_BITS _u(0x00000004) -#define I2C_IC_ENABLE_TX_CMD_BLOCK_MSB _u(2) -#define I2C_IC_ENABLE_TX_CMD_BLOCK_LSB _u(2) -#define I2C_IC_ENABLE_TX_CMD_BLOCK_ACCESS "RW" +#define I2C_IC_ENABLE_TX_CMD_BLOCK_RESET _u(0x0) +#define I2C_IC_ENABLE_TX_CMD_BLOCK_BITS _u(0x00000004) +#define I2C_IC_ENABLE_TX_CMD_BLOCK_MSB _u(2) +#define I2C_IC_ENABLE_TX_CMD_BLOCK_LSB _u(2) +#define I2C_IC_ENABLE_TX_CMD_BLOCK_ACCESS "RW" #define I2C_IC_ENABLE_TX_CMD_BLOCK_VALUE_NOT_BLOCKED _u(0x0) -#define I2C_IC_ENABLE_TX_CMD_BLOCK_VALUE_BLOCKED _u(0x1) +#define I2C_IC_ENABLE_TX_CMD_BLOCK_VALUE_BLOCKED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_ENABLE_ABORT // Description : When set, the controller initiates the transfer abort. - 0: @@ -1565,11 +1639,11 @@ // Reset value: 0x0 // 0x0 -> ABORT operation not in progress // 0x1 -> ABORT operation in progress -#define I2C_IC_ENABLE_ABORT_RESET _u(0x0) -#define I2C_IC_ENABLE_ABORT_BITS _u(0x00000002) -#define I2C_IC_ENABLE_ABORT_MSB _u(1) -#define I2C_IC_ENABLE_ABORT_LSB _u(1) -#define I2C_IC_ENABLE_ABORT_ACCESS "RW" +#define I2C_IC_ENABLE_ABORT_RESET _u(0x0) +#define I2C_IC_ENABLE_ABORT_BITS _u(0x00000002) +#define I2C_IC_ENABLE_ABORT_MSB _u(1) +#define I2C_IC_ENABLE_ABORT_LSB _u(1) +#define I2C_IC_ENABLE_ABORT_ACCESS "RW" #define I2C_IC_ENABLE_ABORT_VALUE_DISABLE _u(0x0) #define I2C_IC_ENABLE_ABORT_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- @@ -1599,13 +1673,13 @@ // Reset value: 0x0 // 0x0 -> I2C is disabled // 0x1 -> I2C is enabled -#define I2C_IC_ENABLE_ENABLE_RESET _u(0x0) -#define I2C_IC_ENABLE_ENABLE_BITS _u(0x00000001) -#define I2C_IC_ENABLE_ENABLE_MSB _u(0) -#define I2C_IC_ENABLE_ENABLE_LSB _u(0) -#define I2C_IC_ENABLE_ENABLE_ACCESS "RW" +#define I2C_IC_ENABLE_ENABLE_RESET _u(0x0) +#define I2C_IC_ENABLE_ENABLE_BITS _u(0x00000001) +#define I2C_IC_ENABLE_ENABLE_MSB _u(0) +#define I2C_IC_ENABLE_ENABLE_LSB _u(0) +#define I2C_IC_ENABLE_ENABLE_ACCESS "RW" #define I2C_IC_ENABLE_ENABLE_VALUE_DISABLED _u(0x0) -#define I2C_IC_ENABLE_ENABLE_VALUE_ENABLED _u(0x1) +#define I2C_IC_ENABLE_ENABLE_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_STATUS // Description : I2C Status Register @@ -1631,12 +1705,12 @@ // DW_apb_i2c is Active Reset value: 0x0 // 0x0 -> Slave is idle // 0x1 -> Slave not idle -#define I2C_IC_STATUS_SLV_ACTIVITY_RESET _u(0x0) -#define I2C_IC_STATUS_SLV_ACTIVITY_BITS _u(0x00000040) -#define I2C_IC_STATUS_SLV_ACTIVITY_MSB _u(6) -#define I2C_IC_STATUS_SLV_ACTIVITY_LSB _u(6) -#define I2C_IC_STATUS_SLV_ACTIVITY_ACCESS "RO" -#define I2C_IC_STATUS_SLV_ACTIVITY_VALUE_IDLE _u(0x0) +#define I2C_IC_STATUS_SLV_ACTIVITY_RESET _u(0x0) +#define I2C_IC_STATUS_SLV_ACTIVITY_BITS _u(0x00000040) +#define I2C_IC_STATUS_SLV_ACTIVITY_MSB _u(6) +#define I2C_IC_STATUS_SLV_ACTIVITY_LSB _u(6) +#define I2C_IC_STATUS_SLV_ACTIVITY_ACCESS "RO" +#define I2C_IC_STATUS_SLV_ACTIVITY_VALUE_IDLE _u(0x0) #define I2C_IC_STATUS_SLV_ACTIVITY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_MST_ACTIVITY @@ -1650,12 +1724,12 @@ // Reset value: 0x0 // 0x0 -> Master is idle // 0x1 -> Master not idle -#define I2C_IC_STATUS_MST_ACTIVITY_RESET _u(0x0) -#define I2C_IC_STATUS_MST_ACTIVITY_BITS _u(0x00000020) -#define I2C_IC_STATUS_MST_ACTIVITY_MSB _u(5) -#define I2C_IC_STATUS_MST_ACTIVITY_LSB _u(5) -#define I2C_IC_STATUS_MST_ACTIVITY_ACCESS "RO" -#define I2C_IC_STATUS_MST_ACTIVITY_VALUE_IDLE _u(0x0) +#define I2C_IC_STATUS_MST_ACTIVITY_RESET _u(0x0) +#define I2C_IC_STATUS_MST_ACTIVITY_BITS _u(0x00000020) +#define I2C_IC_STATUS_MST_ACTIVITY_MSB _u(5) +#define I2C_IC_STATUS_MST_ACTIVITY_LSB _u(5) +#define I2C_IC_STATUS_MST_ACTIVITY_ACCESS "RO" +#define I2C_IC_STATUS_MST_ACTIVITY_VALUE_IDLE _u(0x0) #define I2C_IC_STATUS_MST_ACTIVITY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_RFF @@ -1666,13 +1740,13 @@ // 0x0 // 0x0 -> Rx FIFO not full // 0x1 -> Rx FIFO is full -#define I2C_IC_STATUS_RFF_RESET _u(0x0) -#define I2C_IC_STATUS_RFF_BITS _u(0x00000010) -#define I2C_IC_STATUS_RFF_MSB _u(4) -#define I2C_IC_STATUS_RFF_LSB _u(4) -#define I2C_IC_STATUS_RFF_ACCESS "RO" +#define I2C_IC_STATUS_RFF_RESET _u(0x0) +#define I2C_IC_STATUS_RFF_BITS _u(0x00000010) +#define I2C_IC_STATUS_RFF_MSB _u(4) +#define I2C_IC_STATUS_RFF_LSB _u(4) +#define I2C_IC_STATUS_RFF_ACCESS "RO" #define I2C_IC_STATUS_RFF_VALUE_NOT_FULL _u(0x0) -#define I2C_IC_STATUS_RFF_VALUE_FULL _u(0x1) +#define I2C_IC_STATUS_RFF_VALUE_FULL _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_RFNE // Description : Receive FIFO Not Empty. This bit is set when the receive FIFO @@ -1681,12 +1755,12 @@ // not empty Reset value: 0x0 // 0x0 -> Rx FIFO is empty // 0x1 -> Rx FIFO not empty -#define I2C_IC_STATUS_RFNE_RESET _u(0x0) -#define I2C_IC_STATUS_RFNE_BITS _u(0x00000008) -#define I2C_IC_STATUS_RFNE_MSB _u(3) -#define I2C_IC_STATUS_RFNE_LSB _u(3) -#define I2C_IC_STATUS_RFNE_ACCESS "RO" -#define I2C_IC_STATUS_RFNE_VALUE_EMPTY _u(0x0) +#define I2C_IC_STATUS_RFNE_RESET _u(0x0) +#define I2C_IC_STATUS_RFNE_BITS _u(0x00000008) +#define I2C_IC_STATUS_RFNE_MSB _u(3) +#define I2C_IC_STATUS_RFNE_LSB _u(3) +#define I2C_IC_STATUS_RFNE_ACCESS "RO" +#define I2C_IC_STATUS_RFNE_VALUE_EMPTY _u(0x0) #define I2C_IC_STATUS_RFNE_VALUE_NOT_EMPTY _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_TFE @@ -1697,13 +1771,13 @@ // Transmit FIFO is empty Reset value: 0x1 // 0x0 -> Tx FIFO not empty // 0x1 -> Tx FIFO is empty -#define I2C_IC_STATUS_TFE_RESET _u(0x1) -#define I2C_IC_STATUS_TFE_BITS _u(0x00000004) -#define I2C_IC_STATUS_TFE_MSB _u(2) -#define I2C_IC_STATUS_TFE_LSB _u(2) -#define I2C_IC_STATUS_TFE_ACCESS "RO" +#define I2C_IC_STATUS_TFE_RESET _u(0x1) +#define I2C_IC_STATUS_TFE_BITS _u(0x00000004) +#define I2C_IC_STATUS_TFE_MSB _u(2) +#define I2C_IC_STATUS_TFE_LSB _u(2) +#define I2C_IC_STATUS_TFE_ACCESS "RO" #define I2C_IC_STATUS_TFE_VALUE_NON_EMPTY _u(0x0) -#define I2C_IC_STATUS_TFE_VALUE_EMPTY _u(0x1) +#define I2C_IC_STATUS_TFE_VALUE_EMPTY _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_TFNF // Description : Transmit FIFO Not Full. Set when the transmit FIFO contains one @@ -1712,25 +1786,25 @@ // value: 0x1 // 0x0 -> Tx FIFO is full // 0x1 -> Tx FIFO not full -#define I2C_IC_STATUS_TFNF_RESET _u(0x1) -#define I2C_IC_STATUS_TFNF_BITS _u(0x00000002) -#define I2C_IC_STATUS_TFNF_MSB _u(1) -#define I2C_IC_STATUS_TFNF_LSB _u(1) -#define I2C_IC_STATUS_TFNF_ACCESS "RO" -#define I2C_IC_STATUS_TFNF_VALUE_FULL _u(0x0) +#define I2C_IC_STATUS_TFNF_RESET _u(0x1) +#define I2C_IC_STATUS_TFNF_BITS _u(0x00000002) +#define I2C_IC_STATUS_TFNF_MSB _u(1) +#define I2C_IC_STATUS_TFNF_LSB _u(1) +#define I2C_IC_STATUS_TFNF_ACCESS "RO" +#define I2C_IC_STATUS_TFNF_VALUE_FULL _u(0x0) #define I2C_IC_STATUS_TFNF_VALUE_NOT_FULL _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_STATUS_ACTIVITY // Description : I2C Activity Status. Reset value: 0x0 // 0x0 -> I2C is idle // 0x1 -> I2C is active -#define I2C_IC_STATUS_ACTIVITY_RESET _u(0x0) -#define I2C_IC_STATUS_ACTIVITY_BITS _u(0x00000001) -#define I2C_IC_STATUS_ACTIVITY_MSB _u(0) -#define I2C_IC_STATUS_ACTIVITY_LSB _u(0) -#define I2C_IC_STATUS_ACTIVITY_ACCESS "RO" +#define I2C_IC_STATUS_ACTIVITY_RESET _u(0x0) +#define I2C_IC_STATUS_ACTIVITY_BITS _u(0x00000001) +#define I2C_IC_STATUS_ACTIVITY_MSB _u(0) +#define I2C_IC_STATUS_ACTIVITY_LSB _u(0) +#define I2C_IC_STATUS_ACTIVITY_ACCESS "RO" #define I2C_IC_STATUS_ACTIVITY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_STATUS_ACTIVITY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_STATUS_ACTIVITY_VALUE_ACTIVE _u(0x1) // ============================================================================= // Register : I2C_IC_TXFLR // Description : I2C Transmit FIFO Level Register This register contains the @@ -1870,12 +1944,12 @@ // Role of DW_apb_i2c: Master-Transmitter // 0x0 -> Transfer abort detected by master- scenario not present // 0x1 -> Transfer abort detected by master -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_BITS _u(0x00010000) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_MSB _u(16) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_LSB _u(16) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_VALUE_ABRT_USER_ABRT_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_BITS _u(0x00010000) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_MSB _u(16) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_LSB _u(16) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_VALUE_ABRT_USER_ABRT_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_USER_ABRT_VALUE_ABRT_USER_ABRT_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX @@ -1886,15 +1960,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Slave-Transmitter -// 0x0 -> Slave trying to transmit to remote master in read mode- -// scenario not present +// 0x0 -> Slave trying to transmit to remote master in read mode- scenario not present // 0x1 -> Slave trying to transmit to remote master in read mode -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_BITS _u(0x00008000) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_MSB _u(15) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_LSB _u(15) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_VALUE_ABRT_SLVRD_INTX_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_BITS _u(0x00008000) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_MSB _u(15) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_LSB _u(15) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_VALUE_ABRT_SLVRD_INTX_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVRD_INTX_VALUE_ABRT_SLVRD_INTX_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST @@ -1910,15 +1983,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Slave-Transmitter -// 0x0 -> Slave lost arbitration to remote master- scenario not -// present +// 0x0 -> Slave lost arbitration to remote master- scenario not present // 0x1 -> Slave lost arbitration to remote master -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_BITS _u(0x00004000) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_MSB _u(14) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_LSB _u(14) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_VALUE_ABRT_SLV_ARBLOST_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_BITS _u(0x00004000) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_MSB _u(14) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_LSB _u(14) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_VALUE_ABRT_SLV_ARBLOST_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_SLV_ARBLOST_VALUE_ABRT_SLV_ARBLOST_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO @@ -1929,16 +2001,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Slave-Transmitter -// 0x0 -> Slave flushes existing data in TX-FIFO upon getting read -// command- scenario not present -// 0x1 -> Slave flushes existing data in TX-FIFO upon getting read -// command -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_BITS _u(0x00002000) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_MSB _u(13) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_LSB _u(13) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_VALUE_ABRT_SLVFLUSH_TXFIFO_VOID _u(0x0) +// 0x0 -> Slave flushes existing data in TX-FIFO upon getting read command- scenario not present +// 0x1 -> Slave flushes existing data in TX-FIFO upon getting read command +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_BITS _u(0x00002000) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_MSB _u(13) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_LSB _u(13) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_VALUE_ABRT_SLVFLUSH_TXFIFO_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_SLVFLUSH_TXFIFO_VALUE_ABRT_SLVFLUSH_TXFIFO_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ARB_LOST @@ -1949,15 +2019,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master-Transmitter or Slave-Transmitter -// 0x0 -> Master or Slave-Transmitter lost arbitration- scenario -// not present +// 0x0 -> Master or Slave-Transmitter lost arbitration- scenario not present // 0x1 -> Master or Slave-Transmitter lost arbitration -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_BITS _u(0x00001000) -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_MSB _u(12) -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_LSB _u(12) -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_VALUE_ABRT_LOST_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_BITS _u(0x00001000) +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_MSB _u(12) +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_LSB _u(12) +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_VALUE_ABRT_LOST_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ARB_LOST_VALUE_ABRT_LOST_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS @@ -1967,15 +2036,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master-Transmitter or Master-Receiver -// 0x0 -> User initiating master operation when MASTER disabled- -// scenario not present +// 0x0 -> User initiating master operation when MASTER disabled- scenario not present // 0x1 -> User initiating master operation when MASTER disabled -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_BITS _u(0x00000800) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_MSB _u(11) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_LSB _u(11) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_VALUE_ABRT_MASTER_DIS_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_BITS _u(0x00000800) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_MSB _u(11) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_LSB _u(11) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_VALUE_ABRT_MASTER_DIS_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_MASTER_DIS_VALUE_ABRT_MASTER_DIS_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT @@ -1986,16 +2054,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master-Receiver -// 0x0 -> Master not trying to read in 10Bit addressing mode when -// RESTART disabled -// 0x1 -> Master trying to read in 10Bit addressing mode when -// RESTART disabled -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_BITS _u(0x00000400) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_MSB _u(10) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_LSB _u(10) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_VALUE_ABRT_10B_RD_VOID _u(0x0) +// 0x0 -> Master not trying to read in 10Bit addressing mode when RESTART disabled +// 0x1 -> Master trying to read in 10Bit addressing mode when RESTART disabled +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_BITS _u(0x00000400) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_MSB _u(10) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_LSB _u(10) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_VALUE_ABRT_10B_RD_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_10B_RD_NORSTRT_VALUE_ABRT_10B_RD_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT @@ -2014,15 +2080,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master -// 0x0 -> User trying to send START byte when RESTART disabled- -// scenario not present +// 0x0 -> User trying to send START byte when RESTART disabled- scenario not present // 0x1 -> User trying to send START byte when RESTART disabled -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_BITS _u(0x00000200) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_MSB _u(9) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_LSB _u(9) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_VALUE_ABRT_SBYTE_NORSTRT_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_BITS _u(0x00000200) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_MSB _u(9) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_LSB _u(9) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_VALUE_ABRT_SBYTE_NORSTRT_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_NORSTRT_VALUE_ABRT_SBYTE_NORSTRT_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT @@ -2033,16 +2098,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master-Transmitter or Master-Receiver -// 0x0 -> User trying to switch Master to HS mode when RESTART -// disabled- scenario not present -// 0x1 -> User trying to switch Master to HS mode when RESTART -// disabled -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_BITS _u(0x00000100) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_MSB _u(8) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_LSB _u(8) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_VALUE_ABRT_HS_NORSTRT_VOID _u(0x0) +// 0x0 -> User trying to switch Master to HS mode when RESTART disabled- scenario not present +// 0x1 -> User trying to switch Master to HS mode when RESTART disabled +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_BITS _u(0x00000100) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_MSB _u(8) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_LSB _u(8) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_VALUE_ABRT_HS_NORSTRT_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_NORSTRT_VALUE_ABRT_HS_NORSTRT_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET @@ -2054,12 +2117,12 @@ // Role of DW_apb_i2c: Master // 0x0 -> ACK detected for START byte- scenario not present // 0x1 -> ACK detected for START byte -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_BITS _u(0x00000080) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_MSB _u(7) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_LSB _u(7) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_VALUE_ABRT_SBYTE_ACKDET_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_BITS _u(0x00000080) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_MSB _u(7) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_LSB _u(7) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_VALUE_ABRT_SBYTE_ACKDET_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_SBYTE_ACKDET_VALUE_ABRT_SBYTE_ACKDET_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET @@ -2071,12 +2134,12 @@ // Role of DW_apb_i2c: Master // 0x0 -> HS Master code ACKed in HS Mode- scenario not present // 0x1 -> HS Master code ACKed in HS Mode -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_BITS _u(0x00000040) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_MSB _u(6) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_LSB _u(6) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_VALUE_ABRT_HS_ACK_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_BITS _u(0x00000040) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_MSB _u(6) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_LSB _u(6) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_VALUE_ABRT_HS_ACK_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_HS_ACKDET_VALUE_ABRT_HS_ACK_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ @@ -2090,12 +2153,12 @@ // Role of DW_apb_i2c: Master-Transmitter // 0x0 -> GCALL is followed by read from bus-scenario not present // 0x1 -> GCALL is followed by read from bus -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_BITS _u(0x00000020) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_MSB _u(5) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_LSB _u(5) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_VALUE_ABRT_GCALL_READ_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_BITS _u(0x00000020) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_MSB _u(5) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_LSB _u(5) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_VALUE_ABRT_GCALL_READ_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_READ_VALUE_ABRT_GCALL_READ_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK @@ -2108,12 +2171,12 @@ // Role of DW_apb_i2c: Master-Transmitter // 0x0 -> GCALL not ACKed by any slave-scenario not present // 0x1 -> GCALL not ACKed by any slave -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_BITS _u(0x00000010) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_MSB _u(4) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_LSB _u(4) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_VALUE_ABRT_GCALL_NOACK_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_BITS _u(0x00000010) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_MSB _u(4) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_LSB _u(4) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_VALUE_ABRT_GCALL_NOACK_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_GCALL_NOACK_VALUE_ABRT_GCALL_NOACK_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK @@ -2125,15 +2188,14 @@ // Reset value: 0x0 // // Role of DW_apb_i2c: Master-Transmitter -// 0x0 -> Transmitted data non-ACKed by addressed slave-scenario -// not present +// 0x0 -> Transmitted data non-ACKed by addressed slave-scenario not present // 0x1 -> Transmitted data not ACKed by addressed slave -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_BITS _u(0x00000008) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_MSB _u(3) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_LSB _u(3) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_ACCESS "RO" -#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_VALUE_ABRT_TXDATA_NOACK_VOID _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_BITS _u(0x00000008) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_MSB _u(3) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_LSB _u(3) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_VALUE_ABRT_TXDATA_NOACK_VOID _u(0x0) #define I2C_IC_TX_ABRT_SOURCE_ABRT_TXDATA_NOACK_VALUE_ABRT_TXDATA_NOACK_GENERATED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK @@ -2146,13 +2208,13 @@ // Role of DW_apb_i2c: Master-Transmitter or Master-Receiver // 0x0 -> This abort is not generated // 0x1 -> Byte 2 of 10Bit Address not ACKed by any slave -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_BITS _u(0x00000004) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_MSB _u(2) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_LSB _u(2) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_BITS _u(0x00000004) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_MSB _u(2) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_LSB _u(2) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_ACCESS "RO" #define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_VALUE_INACTIVE _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_VALUE_ACTIVE _u(0x1) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR2_NOACK_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK // Description : This field indicates that the Master is in 10-bit address mode @@ -2164,13 +2226,13 @@ // Role of DW_apb_i2c: Master-Transmitter or Master-Receiver // 0x0 -> This abort is not generated // 0x1 -> Byte 1 of 10Bit Address not ACKed by any slave -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_BITS _u(0x00000002) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_MSB _u(1) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_LSB _u(1) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_ACCESS "RO" +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_BITS _u(0x00000002) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_MSB _u(1) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_LSB _u(1) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_ACCESS "RO" #define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_VALUE_INACTIVE _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_VALUE_ACTIVE _u(0x1) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_10ADDR1_NOACK_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK // Description : This field indicates that the Master is in 7-bit addressing @@ -2180,15 +2242,14 @@ // // Role of DW_apb_i2c: Master-Transmitter or Master-Receiver // 0x0 -> This abort is not generated -// 0x1 -> This abort is generated because of NOACK for 7-bit -// address -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_RESET _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_BITS _u(0x00000001) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_MSB _u(0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_LSB _u(0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_ACCESS "RO" +// 0x1 -> This abort is generated because of NOACK for 7-bit address +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_RESET _u(0x0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_BITS _u(0x00000001) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_MSB _u(0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_LSB _u(0) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_ACCESS "RO" #define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_VALUE_INACTIVE _u(0x0) -#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_VALUE_ACTIVE _u(0x1) +#define I2C_IC_TX_ABRT_SOURCE_ABRT_7B_ADDR_NOACK_VALUE_ACTIVE _u(0x1) // ============================================================================= // Register : I2C_IC_SLV_DATA_NACK_ONLY // Description : Generate Slave Data NACK Register @@ -2222,13 +2283,13 @@ // value: 0x0 // 0x0 -> Slave receiver generates NACK normally // 0x1 -> Slave receiver generates NACK upon data reception only -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_RESET _u(0x0) -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_BITS _u(0x00000001) -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_MSB _u(0) -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_LSB _u(0) -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_ACCESS "RW" +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_RESET _u(0x0) +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_BITS _u(0x00000001) +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_MSB _u(0) +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_LSB _u(0) +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_ACCESS "RW" #define I2C_IC_SLV_DATA_NACK_ONLY_NACK_VALUE_DISABLED _u(0x0) -#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_VALUE_ENABLED _u(0x1) +#define I2C_IC_SLV_DATA_NACK_ONLY_NACK_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_DMA_CR // Description : DMA Control Register @@ -2245,26 +2306,26 @@ // FIFO DMA channel. Reset value: 0x0 // 0x0 -> transmit FIFO DMA channel disabled // 0x1 -> Transmit FIFO DMA channel enabled -#define I2C_IC_DMA_CR_TDMAE_RESET _u(0x0) -#define I2C_IC_DMA_CR_TDMAE_BITS _u(0x00000002) -#define I2C_IC_DMA_CR_TDMAE_MSB _u(1) -#define I2C_IC_DMA_CR_TDMAE_LSB _u(1) -#define I2C_IC_DMA_CR_TDMAE_ACCESS "RW" +#define I2C_IC_DMA_CR_TDMAE_RESET _u(0x0) +#define I2C_IC_DMA_CR_TDMAE_BITS _u(0x00000002) +#define I2C_IC_DMA_CR_TDMAE_MSB _u(1) +#define I2C_IC_DMA_CR_TDMAE_LSB _u(1) +#define I2C_IC_DMA_CR_TDMAE_ACCESS "RW" #define I2C_IC_DMA_CR_TDMAE_VALUE_DISABLED _u(0x0) -#define I2C_IC_DMA_CR_TDMAE_VALUE_ENABLED _u(0x1) +#define I2C_IC_DMA_CR_TDMAE_VALUE_ENABLED _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_DMA_CR_RDMAE // Description : Receive DMA Enable. This bit enables/disables the receive FIFO // DMA channel. Reset value: 0x0 // 0x0 -> Receive FIFO DMA channel disabled // 0x1 -> Receive FIFO DMA channel enabled -#define I2C_IC_DMA_CR_RDMAE_RESET _u(0x0) -#define I2C_IC_DMA_CR_RDMAE_BITS _u(0x00000001) -#define I2C_IC_DMA_CR_RDMAE_MSB _u(0) -#define I2C_IC_DMA_CR_RDMAE_LSB _u(0) -#define I2C_IC_DMA_CR_RDMAE_ACCESS "RW" +#define I2C_IC_DMA_CR_RDMAE_RESET _u(0x0) +#define I2C_IC_DMA_CR_RDMAE_BITS _u(0x00000001) +#define I2C_IC_DMA_CR_RDMAE_MSB _u(0) +#define I2C_IC_DMA_CR_RDMAE_LSB _u(0) +#define I2C_IC_DMA_CR_RDMAE_ACCESS "RW" #define I2C_IC_DMA_CR_RDMAE_VALUE_DISABLED _u(0x0) -#define I2C_IC_DMA_CR_RDMAE_VALUE_ENABLED _u(0x1) +#define I2C_IC_DMA_CR_RDMAE_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_DMA_TDLR // Description : DMA Transmit Data Level Register @@ -2360,13 +2421,13 @@ // ic_data_oe). // 0x0 -> Generate NACK for a General Call // 0x1 -> Generate ACK for a General Call -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_RESET _u(0x1) -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_BITS _u(0x00000001) -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_MSB _u(0) -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_LSB _u(0) -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_ACCESS "RW" +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_RESET _u(0x1) +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_BITS _u(0x00000001) +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_MSB _u(0) +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_LSB _u(0) +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_ACCESS "RW" #define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_VALUE_DISABLED _u(0x0) -#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_VALUE_ENABLED _u(0x1) +#define I2C_IC_ACK_GENERAL_CALL_ACK_GEN_CALL_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_ENABLE_STATUS // Description : I2C Enable Status Register @@ -2389,14 +2450,14 @@ #define I2C_IC_ENABLE_STATUS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST -// Description : Slave Received Data Lost. This bit indicates if a -// Slave-Receiver operation has been aborted with at least one -// data byte received from an I2C transfer due to the setting bit -// 0 of IC_ENABLE from 1 to 0. When read as 1, DW_apb_i2c is -// deemed to have been actively engaged in an aborted I2C transfer -// (with matching address) and the data phase of the I2C transfer -// has been entered, even though a data byte has been responded -// with a NACK. +// Description : Slave Received Data Lost. This bit indicates if a Slave- +// Receiver operation has been aborted with at least one data byte +// received from an I2C transfer due to the setting bit 0 of +// IC_ENABLE from 1 to 0. When read as 1, DW_apb_i2c is deemed to +// have been actively engaged in an aborted I2C transfer (with +// matching address) and the data phase of the I2C transfer has +// been entered, even though a data byte has been responded with a +// NACK. // // Note: If the remote I2C master terminates the transfer with a // STOP condition before the DW_apb_i2c has a chance to NACK a @@ -2404,8 +2465,8 @@ // also set to 1. // // When read as 0, DW_apb_i2c is deemed to have been disabled -// without being actively involved in the data phase of a -// Slave-Receiver transfer. +// without being actively involved in the data phase of a Slave- +// Receiver transfer. // // Note: The CPU can safely read this bit when IC_EN (bit 0) is // read as 0. @@ -2413,13 +2474,13 @@ // Reset value: 0x0 // 0x0 -> Slave RX Data is not lost // 0x1 -> Slave RX Data is lost -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_RESET _u(0x0) -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_BITS _u(0x00000004) -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_MSB _u(2) -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_LSB _u(2) -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_ACCESS "RO" +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_RESET _u(0x0) +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_BITS _u(0x00000004) +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_MSB _u(2) +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_LSB _u(2) +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_ACCESS "RO" #define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_VALUE_INACTIVE _u(0x0) -#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_VALUE_ACTIVE _u(0x1) +#define I2C_IC_ENABLE_STATUS_SLV_RX_DATA_LOST_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY // Description : Slave Disabled While Busy (Transmit, Receive). This bit @@ -2428,8 +2489,8 @@ // 1 to 0. This bit is set when the CPU writes a 0 to the // IC_ENABLE register while: // -// (a) DW_apb_i2c is receiving the address byte of the -// Slave-Transmitter operation from a remote master; +// (a) DW_apb_i2c is receiving the address byte of the Slave- +// Transmitter operation from a remote master; // // OR, // @@ -2456,13 +2517,13 @@ // Reset value: 0x0 // 0x0 -> Slave is disabled when it is idle // 0x1 -> Slave is disabled when it is active -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_RESET _u(0x0) -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_BITS _u(0x00000002) -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_MSB _u(1) -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_LSB _u(1) -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_ACCESS "RO" +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_RESET _u(0x0) +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_BITS _u(0x00000002) +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_MSB _u(1) +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_LSB _u(1) +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_ACCESS "RO" #define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_VALUE_INACTIVE _u(0x0) -#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_VALUE_ACTIVE _u(0x1) +#define I2C_IC_ENABLE_STATUS_SLV_DISABLED_WHILE_BUSY_VALUE_ACTIVE _u(0x1) // ----------------------------------------------------------------------------- // Field : I2C_IC_ENABLE_STATUS_IC_EN // Description : ic_en Status. This bit always reflects the value driven on the @@ -2475,13 +2536,13 @@ // Reset value: 0x0 // 0x0 -> I2C disabled // 0x1 -> I2C enabled -#define I2C_IC_ENABLE_STATUS_IC_EN_RESET _u(0x0) -#define I2C_IC_ENABLE_STATUS_IC_EN_BITS _u(0x00000001) -#define I2C_IC_ENABLE_STATUS_IC_EN_MSB _u(0) -#define I2C_IC_ENABLE_STATUS_IC_EN_LSB _u(0) -#define I2C_IC_ENABLE_STATUS_IC_EN_ACCESS "RO" +#define I2C_IC_ENABLE_STATUS_IC_EN_RESET _u(0x0) +#define I2C_IC_ENABLE_STATUS_IC_EN_BITS _u(0x00000001) +#define I2C_IC_ENABLE_STATUS_IC_EN_MSB _u(0) +#define I2C_IC_ENABLE_STATUS_IC_EN_LSB _u(0) +#define I2C_IC_ENABLE_STATUS_IC_EN_ACCESS "RO" #define I2C_IC_ENABLE_STATUS_IC_EN_VALUE_DISABLED _u(0x0) -#define I2C_IC_ENABLE_STATUS_IC_EN_VALUE_ENABLED _u(0x1) +#define I2C_IC_ENABLE_STATUS_IC_EN_VALUE_ENABLED _u(0x1) // ============================================================================= // Register : I2C_IC_FS_SPKLEN // Description : I2C SS, FS or FM+ spike suppression limit @@ -2613,7 +2674,6 @@ #define I2C_IC_COMP_VERSION_RESET _u(0x3230312a) // ----------------------------------------------------------------------------- // Field : I2C_IC_COMP_VERSION_IC_COMP_VERSION -// Description : None #define I2C_IC_COMP_VERSION_IC_COMP_VERSION_RESET _u(0x3230312a) #define I2C_IC_COMP_VERSION_IC_COMP_VERSION_BITS _u(0xffffffff) #define I2C_IC_COMP_VERSION_IC_COMP_VERSION_MSB _u(31) @@ -2636,4 +2696,5 @@ #define I2C_IC_COMP_TYPE_IC_COMP_TYPE_LSB _u(0) #define I2C_IC_COMP_TYPE_IC_COMP_TYPE_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_I2C_DEFINED +#endif // _HARDWARE_REGS_I2C_H + diff --git a/lib/pico-sdk/rp2040/hardware/regs/intctrl.h b/lib/pico-sdk/rp2040/hardware/regs/intctrl.h new file mode 100644 index 00000000..3190b413 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/intctrl.h @@ -0,0 +1,106 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _INTCTRL_H +#define _INTCTRL_H + +/** + * \file rp2040/intctrl.h + */ + +#ifdef __ASSEMBLER__ +#define TIMER_IRQ_0 0 +#define TIMER_IRQ_1 1 +#define TIMER_IRQ_2 2 +#define TIMER_IRQ_3 3 +#define PWM_IRQ_WRAP 4 +#define USBCTRL_IRQ 5 +#define XIP_IRQ 6 +#define PIO0_IRQ_0 7 +#define PIO0_IRQ_1 8 +#define PIO1_IRQ_0 9 +#define PIO1_IRQ_1 10 +#define DMA_IRQ_0 11 +#define DMA_IRQ_1 12 +#define IO_IRQ_BANK0 13 +#define IO_IRQ_QSPI 14 +#define SIO_IRQ_PROC0 15 +#define SIO_IRQ_PROC1 16 +#define CLOCKS_IRQ 17 +#define SPI0_IRQ 18 +#define SPI1_IRQ 19 +#define UART0_IRQ 20 +#define UART1_IRQ 21 +#define ADC_IRQ_FIFO 22 +#define I2C0_IRQ 23 +#define I2C1_IRQ 24 +#define RTC_IRQ 25 +#else +/** + * \brief Interrupt numbers on RP2040 (used as typedef \ref irq_num_t) + * \ingroup hardware_irq + */ +typedef enum irq_num_rp2040 { + TIMER_IRQ_0 = 0, ///< Select TIMER's IRQ 0 output + TIMER_IRQ_1 = 1, ///< Select TIMER's IRQ 1 output + TIMER_IRQ_2 = 2, ///< Select TIMER's IRQ 2 output + TIMER_IRQ_3 = 3, ///< Select TIMER's IRQ 3 output + PWM_IRQ_WRAP = 4, ///< Select PWM's IRQ_WRAP output + USBCTRL_IRQ = 5, ///< Select USBCTRL's IRQ output + XIP_IRQ = 6, ///< Select XIP's IRQ output + PIO0_IRQ_0 = 7, ///< Select PIO0's IRQ 0 output + PIO0_IRQ_1 = 8, ///< Select PIO0's IRQ 1 output + PIO1_IRQ_0 = 9, ///< Select PIO1's IRQ 0 output + PIO1_IRQ_1 = 10, ///< Select PIO1's IRQ 1 output + DMA_IRQ_0 = 11, ///< Select DMA's IRQ 0 output + DMA_IRQ_1 = 12, ///< Select DMA's IRQ 1 output + IO_IRQ_BANK0 = 13, ///< Select IO_BANK0's IRQ output + IO_IRQ_QSPI = 14, ///< Select IO_QSPI's IRQ output + SIO_IRQ_PROC0 = 15, ///< Select SIO_PROC0's IRQ output + SIO_IRQ_PROC1 = 16, ///< Select SIO_PROC1's IRQ output + CLOCKS_IRQ = 17, ///< Select CLOCKS's IRQ output + SPI0_IRQ = 18, ///< Select SPI0's IRQ output + SPI1_IRQ = 19, ///< Select SPI1's IRQ output + UART0_IRQ = 20, ///< Select UART0's IRQ output + UART1_IRQ = 21, ///< Select UART1's IRQ output + ADC_IRQ_FIFO = 22, ///< Select ADC's IRQ_FIFO output + I2C0_IRQ = 23, ///< Select I2C0's IRQ output + I2C1_IRQ = 24, ///< Select I2C1's IRQ output + RTC_IRQ = 25, ///< Select RTC's IRQ output + IRQ_COUNT +} irq_num_t; +#endif + +#define isr_timer_0 isr_irq0 +#define isr_timer_1 isr_irq1 +#define isr_timer_2 isr_irq2 +#define isr_timer_3 isr_irq3 +#define isr_pwm_wrap isr_irq4 +#define isr_usbctrl isr_irq5 +#define isr_xip isr_irq6 +#define isr_pio0_0 isr_irq7 +#define isr_pio0_1 isr_irq8 +#define isr_pio1_0 isr_irq9 +#define isr_pio1_1 isr_irq10 +#define isr_dma_0 isr_irq11 +#define isr_dma_1 isr_irq12 +#define isr_io_bank0 isr_irq13 +#define isr_io_qspi isr_irq14 +#define isr_sio_proc0 isr_irq15 +#define isr_sio_proc1 isr_irq16 +#define isr_clocks isr_irq17 +#define isr_spi0 isr_irq18 +#define isr_spi1 isr_irq19 +#define isr_uart0 isr_irq20 +#define isr_uart1 isr_irq21 +#define isr_adc_fifo isr_irq22 +#define isr_i2c0 isr_irq23 +#define isr_i2c1 isr_irq24 +#define isr_rtc isr_irq25 + +#endif // _INTCTRL_H + diff --git a/lib/rp2040/hardware/regs/io_bank0.h b/lib/pico-sdk/rp2040/hardware/regs/io_bank0.h index 26f139e3..c0ebaf9f 100644 --- a/lib/rp2040/hardware/regs/io_bank0.h +++ b/lib/pico-sdk/rp2040/hardware/regs/io_bank0.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : IO_BANK0 // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_IO_BANK0_DEFINED -#define HARDWARE_REGS_IO_BANK0_DEFINED +#ifndef _HARDWARE_REGS_IO_BANK0_H +#define _HARDWARE_REGS_IO_BANK0_H // ============================================================================= // Register : IO_BANK0_GPIO0_STATUS // Description : GPIO status @@ -91,67 +92,64 @@ #define IO_BANK0_GPIO0_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO0_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO0_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO0_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO0_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO0_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO0_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO0_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO0_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO0_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO0_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO0_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO0_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO0_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO0_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO0_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO0_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO0_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO0_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO0_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO0_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO0_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO0_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO0_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO0_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO0_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO0_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO0_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO0_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO0_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO0_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO0_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO0_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO0_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -166,21 +164,21 @@ // 0x07 -> pio1_0 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_JTAG_TCK _u(0x00) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PWM_A_0 _u(0x04) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_SIO_0 _u(0x05) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PIO0_0 _u(0x06) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PIO1_0 _u(0x07) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_JTAG_TCK _u(0x00) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PWM_A_0 _u(0x04) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_SIO_0 _u(0x05) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PIO0_0 _u(0x06) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_PIO1_0 _u(0x07) #define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO0_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO1_STATUS // Description : GPIO status @@ -261,67 +259,64 @@ #define IO_BANK0_GPIO1_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO1_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO1_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO1_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO1_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO1_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO1_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO1_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO1_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO1_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO1_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO1_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO1_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO1_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO1_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO1_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO1_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO1_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO1_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO1_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO1_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO1_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO1_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO1_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO1_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO1_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO1_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO1_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO1_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO1_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO1_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO1_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO1_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO1_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -336,21 +331,21 @@ // 0x07 -> pio1_1 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_JTAG_TMS _u(0x00) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PWM_B_0 _u(0x04) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_SIO_1 _u(0x05) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PIO0_1 _u(0x06) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PIO1_1 _u(0x07) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_JTAG_TMS _u(0x00) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PWM_B_0 _u(0x04) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_SIO_1 _u(0x05) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PIO0_1 _u(0x06) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_PIO1_1 _u(0x07) #define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO1_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO2_STATUS // Description : GPIO status @@ -431,67 +426,64 @@ #define IO_BANK0_GPIO2_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO2_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO2_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO2_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO2_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO2_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO2_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO2_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO2_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO2_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO2_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO2_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO2_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO2_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO2_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO2_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO2_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO2_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO2_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO2_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO2_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO2_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO2_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO2_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO2_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO2_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO2_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO2_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO2_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO2_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO2_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO2_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO2_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO2_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -506,21 +498,21 @@ // 0x07 -> pio1_2 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_JTAG_TDI _u(0x00) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PWM_A_1 _u(0x04) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_SIO_2 _u(0x05) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PIO0_2 _u(0x06) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PIO1_2 _u(0x07) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_JTAG_TDI _u(0x00) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PWM_A_1 _u(0x04) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_SIO_2 _u(0x05) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PIO0_2 _u(0x06) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_PIO1_2 _u(0x07) #define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO2_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO3_STATUS // Description : GPIO status @@ -601,67 +593,64 @@ #define IO_BANK0_GPIO3_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO3_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO3_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO3_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO3_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO3_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO3_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO3_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO3_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO3_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO3_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO3_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO3_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO3_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO3_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO3_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO3_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO3_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO3_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO3_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO3_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO3_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO3_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO3_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO3_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO3_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO3_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO3_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO3_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO3_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO3_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO3_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO3_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO3_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -676,21 +665,21 @@ // 0x07 -> pio1_3 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_JTAG_TDO _u(0x00) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PWM_B_1 _u(0x04) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_SIO_3 _u(0x05) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PIO0_3 _u(0x06) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PIO1_3 _u(0x07) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_JTAG_TDO _u(0x00) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PWM_B_1 _u(0x04) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_SIO_3 _u(0x05) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PIO0_3 _u(0x06) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_PIO1_3 _u(0x07) #define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO3_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO4_STATUS // Description : GPIO status @@ -771,67 +760,64 @@ #define IO_BANK0_GPIO4_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO4_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO4_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO4_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO4_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO4_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO4_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO4_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO4_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO4_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO4_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO4_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO4_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO4_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO4_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO4_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO4_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO4_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO4_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO4_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO4_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO4_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO4_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO4_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO4_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO4_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO4_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO4_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO4_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO4_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO4_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO4_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO4_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO4_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -845,20 +831,20 @@ // 0x07 -> pio1_4 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PWM_A_2 _u(0x04) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_SIO_4 _u(0x05) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PIO0_4 _u(0x06) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PIO1_4 _u(0x07) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PWM_A_2 _u(0x04) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_SIO_4 _u(0x05) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PIO0_4 _u(0x06) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_PIO1_4 _u(0x07) #define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO4_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO5_STATUS // Description : GPIO status @@ -939,67 +925,64 @@ #define IO_BANK0_GPIO5_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO5_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO5_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO5_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO5_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO5_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO5_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO5_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO5_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO5_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO5_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO5_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO5_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO5_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO5_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO5_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO5_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO5_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO5_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO5_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO5_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO5_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO5_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO5_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO5_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO5_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO5_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO5_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO5_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO5_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO5_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO5_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO5_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO5_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1013,20 +996,20 @@ // 0x07 -> pio1_5 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PWM_B_2 _u(0x04) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_SIO_5 _u(0x05) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PIO0_5 _u(0x06) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PIO1_5 _u(0x07) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PWM_B_2 _u(0x04) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_SIO_5 _u(0x05) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PIO0_5 _u(0x06) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_PIO1_5 _u(0x07) #define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO5_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO6_STATUS // Description : GPIO status @@ -1107,67 +1090,64 @@ #define IO_BANK0_GPIO6_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO6_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO6_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO6_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO6_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO6_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO6_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO6_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO6_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO6_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO6_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO6_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO6_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO6_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO6_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO6_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO6_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO6_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO6_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO6_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO6_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO6_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO6_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO6_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO6_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO6_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO6_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO6_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO6_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO6_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO6_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO6_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO6_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO6_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1182,21 +1162,21 @@ // 0x08 -> usb_muxing_extphy_softcon // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PWM_A_3 _u(0x04) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_SIO_6 _u(0x05) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PIO0_6 _u(0x06) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PIO1_6 _u(0x07) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_SOFTCON _u(0x08) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PWM_A_3 _u(0x04) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_SIO_6 _u(0x05) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PIO0_6 _u(0x06) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_PIO1_6 _u(0x07) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_SOFTCON _u(0x08) #define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO6_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO7_STATUS // Description : GPIO status @@ -1277,67 +1257,64 @@ #define IO_BANK0_GPIO7_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO7_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO7_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO7_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO7_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO7_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO7_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO7_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO7_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO7_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO7_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO7_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO7_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO7_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO7_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO7_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO7_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO7_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO7_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO7_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO7_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO7_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO7_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO7_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO7_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO7_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO7_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO7_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO7_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO7_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO7_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO7_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO7_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO7_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1352,21 +1329,21 @@ // 0x08 -> usb_muxing_extphy_oe_n // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PWM_B_3 _u(0x04) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_SIO_7 _u(0x05) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PIO0_7 _u(0x06) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PIO1_7 _u(0x07) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PWM_B_3 _u(0x04) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_SIO_7 _u(0x05) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PIO0_7 _u(0x06) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_PIO1_7 _u(0x07) #define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_OE_N _u(0x08) #define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO7_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO8_STATUS // Description : GPIO status @@ -1447,67 +1424,64 @@ #define IO_BANK0_GPIO8_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO8_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO8_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO8_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO8_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO8_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO8_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO8_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO8_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO8_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO8_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO8_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO8_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO8_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO8_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO8_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO8_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO8_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO8_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO8_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO8_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO8_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO8_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO8_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO8_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO8_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO8_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO8_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO8_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO8_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO8_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO8_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO8_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO8_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1522,21 +1496,21 @@ // 0x08 -> usb_muxing_extphy_rcv // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PWM_A_4 _u(0x04) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_SIO_8 _u(0x05) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PIO0_8 _u(0x06) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PIO1_8 _u(0x07) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PWM_A_4 _u(0x04) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_SIO_8 _u(0x05) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PIO0_8 _u(0x06) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_PIO1_8 _u(0x07) #define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_RCV _u(0x08) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) +#define IO_BANK0_GPIO8_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO9_STATUS // Description : GPIO status @@ -1617,67 +1591,64 @@ #define IO_BANK0_GPIO9_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO9_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO9_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO9_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO9_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO9_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO9_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO9_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO9_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO9_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO9_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO9_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO9_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO9_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO9_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO9_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO9_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO9_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO9_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO9_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO9_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO9_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO9_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO9_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO9_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO9_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO9_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO9_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO9_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO9_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO9_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO9_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO9_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO9_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1692,21 +1663,21 @@ // 0x08 -> usb_muxing_extphy_vp // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PWM_B_4 _u(0x04) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_SIO_9 _u(0x05) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PIO0_9 _u(0x06) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PIO1_9 _u(0x07) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VP _u(0x08) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PWM_B_4 _u(0x04) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_SIO_9 _u(0x05) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PIO0_9 _u(0x06) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_PIO1_9 _u(0x07) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VP _u(0x08) #define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO9_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO10_STATUS // Description : GPIO status @@ -1787,67 +1758,64 @@ #define IO_BANK0_GPIO10_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO10_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO10_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO10_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO10_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO10_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO10_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO10_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO10_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO10_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO10_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO10_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO10_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO10_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO10_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO10_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO10_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO10_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO10_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO10_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO10_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO10_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO10_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO10_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO10_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO10_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO10_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO10_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO10_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO10_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO10_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO10_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO10_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO10_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -1862,21 +1830,21 @@ // 0x08 -> usb_muxing_extphy_vm // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PWM_A_5 _u(0x04) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_SIO_10 _u(0x05) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PIO0_10 _u(0x06) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PIO1_10 _u(0x07) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VM _u(0x08) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PWM_A_5 _u(0x04) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_SIO_10 _u(0x05) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PIO0_10 _u(0x06) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_PIO1_10 _u(0x07) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VM _u(0x08) #define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO10_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO11_STATUS // Description : GPIO status @@ -1957,67 +1925,64 @@ #define IO_BANK0_GPIO11_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO11_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO11_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO11_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO11_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO11_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO11_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO11_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO11_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO11_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO11_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO11_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO11_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO11_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO11_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO11_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO11_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO11_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO11_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO11_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO11_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO11_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO11_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO11_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO11_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO11_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO11_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO11_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO11_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO11_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO11_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO11_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO11_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO11_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2032,21 +1997,21 @@ // 0x08 -> usb_muxing_extphy_suspnd // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PWM_B_5 _u(0x04) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_SIO_11 _u(0x05) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PIO0_11 _u(0x06) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PIO1_11 _u(0x07) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PWM_B_5 _u(0x04) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_SIO_11 _u(0x05) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PIO0_11 _u(0x06) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_PIO1_11 _u(0x07) #define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_SUSPND _u(0x08) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) +#define IO_BANK0_GPIO11_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO12_STATUS // Description : GPIO status @@ -2127,67 +2092,64 @@ #define IO_BANK0_GPIO12_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO12_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO12_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO12_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO12_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO12_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO12_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO12_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO12_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO12_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO12_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO12_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO12_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO12_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO12_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO12_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO12_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO12_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO12_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO12_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO12_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO12_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO12_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO12_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO12_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO12_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO12_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO12_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO12_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO12_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO12_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO12_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO12_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO12_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2202,21 +2164,21 @@ // 0x08 -> usb_muxing_extphy_speed // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PWM_A_6 _u(0x04) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_SIO_12 _u(0x05) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PIO0_12 _u(0x06) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PIO1_12 _u(0x07) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_SPEED _u(0x08) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PWM_A_6 _u(0x04) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_SIO_12 _u(0x05) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PIO0_12 _u(0x06) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_PIO1_12 _u(0x07) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_SPEED _u(0x08) #define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO12_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO13_STATUS // Description : GPIO status @@ -2297,67 +2259,64 @@ #define IO_BANK0_GPIO13_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO13_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO13_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO13_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO13_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO13_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO13_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO13_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO13_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO13_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO13_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO13_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO13_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO13_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO13_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO13_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO13_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO13_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO13_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO13_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO13_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO13_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO13_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO13_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO13_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO13_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO13_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO13_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO13_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO13_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO13_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO13_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO13_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO13_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2372,21 +2331,21 @@ // 0x08 -> usb_muxing_extphy_vpo // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PWM_B_6 _u(0x04) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_SIO_13 _u(0x05) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PIO0_13 _u(0x06) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PIO1_13 _u(0x07) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VPO _u(0x08) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PWM_B_6 _u(0x04) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_SIO_13 _u(0x05) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PIO0_13 _u(0x06) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_PIO1_13 _u(0x07) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VPO _u(0x08) #define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO13_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO14_STATUS // Description : GPIO status @@ -2467,67 +2426,64 @@ #define IO_BANK0_GPIO14_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO14_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO14_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO14_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO14_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO14_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO14_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO14_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO14_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO14_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO14_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO14_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO14_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO14_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO14_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO14_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO14_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO14_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO14_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO14_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO14_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO14_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO14_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO14_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO14_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO14_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO14_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO14_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO14_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO14_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO14_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO14_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO14_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO14_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2542,21 +2498,21 @@ // 0x08 -> usb_muxing_extphy_vmo // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PWM_A_7 _u(0x04) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_SIO_14 _u(0x05) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PIO0_14 _u(0x06) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PIO1_14 _u(0x07) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PWM_A_7 _u(0x04) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_SIO_14 _u(0x05) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PIO0_14 _u(0x06) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_PIO1_14 _u(0x07) #define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_USB_MUXING_EXTPHY_VMO _u(0x08) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) +#define IO_BANK0_GPIO14_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO15_STATUS // Description : GPIO status @@ -2637,67 +2593,64 @@ #define IO_BANK0_GPIO15_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO15_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO15_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO15_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO15_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO15_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO15_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO15_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO15_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO15_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO15_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO15_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO15_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO15_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO15_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO15_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO15_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO15_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO15_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO15_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO15_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO15_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO15_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO15_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO15_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO15_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO15_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO15_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO15_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO15_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO15_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO15_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO15_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO15_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2712,21 +2665,21 @@ // 0x08 -> usb_muxing_digital_dp // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PWM_B_7 _u(0x04) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_SIO_15 _u(0x05) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PIO0_15 _u(0x06) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PIO1_15 _u(0x07) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_USB_MUXING_DIGITAL_DP _u(0x08) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PWM_B_7 _u(0x04) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_SIO_15 _u(0x05) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PIO0_15 _u(0x06) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_PIO1_15 _u(0x07) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_USB_MUXING_DIGITAL_DP _u(0x08) #define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO15_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO16_STATUS // Description : GPIO status @@ -2807,67 +2760,64 @@ #define IO_BANK0_GPIO16_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO16_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO16_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO16_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO16_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO16_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO16_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO16_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO16_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO16_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO16_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO16_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO16_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO16_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO16_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO16_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO16_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO16_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO16_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO16_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO16_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO16_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO16_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO16_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO16_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO16_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO16_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO16_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO16_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO16_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO16_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO16_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO16_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO16_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -2882,21 +2832,21 @@ // 0x08 -> usb_muxing_digital_dm // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PWM_A_0 _u(0x04) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_SIO_16 _u(0x05) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PIO0_16 _u(0x06) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PIO1_16 _u(0x07) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_USB_MUXING_DIGITAL_DM _u(0x08) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PWM_A_0 _u(0x04) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_SIO_16 _u(0x05) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PIO0_16 _u(0x06) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_PIO1_16 _u(0x07) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_USB_MUXING_DIGITAL_DM _u(0x08) #define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO16_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO17_STATUS // Description : GPIO status @@ -2977,67 +2927,64 @@ #define IO_BANK0_GPIO17_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO17_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO17_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO17_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO17_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO17_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO17_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO17_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO17_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO17_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO17_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO17_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO17_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO17_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO17_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO17_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO17_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO17_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO17_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO17_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO17_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO17_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO17_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO17_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO17_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO17_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO17_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO17_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO17_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO17_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO17_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO17_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO17_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO17_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3051,20 +2998,20 @@ // 0x07 -> pio1_17 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PWM_B_0 _u(0x04) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_SIO_17 _u(0x05) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PIO0_17 _u(0x06) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PIO1_17 _u(0x07) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PWM_B_0 _u(0x04) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_SIO_17 _u(0x05) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PIO0_17 _u(0x06) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_PIO1_17 _u(0x07) #define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO17_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO18_STATUS // Description : GPIO status @@ -3145,67 +3092,64 @@ #define IO_BANK0_GPIO18_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO18_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO18_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO18_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO18_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO18_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO18_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO18_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO18_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO18_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO18_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO18_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO18_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO18_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO18_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO18_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO18_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO18_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO18_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO18_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO18_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO18_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO18_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO18_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO18_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO18_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO18_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO18_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO18_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO18_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO18_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO18_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO18_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO18_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3219,20 +3163,20 @@ // 0x07 -> pio1_18 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PWM_A_1 _u(0x04) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_SIO_18 _u(0x05) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PIO0_18 _u(0x06) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PIO1_18 _u(0x07) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_UART0_CTS _u(0x02) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PWM_A_1 _u(0x04) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_SIO_18 _u(0x05) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PIO0_18 _u(0x06) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_PIO1_18 _u(0x07) #define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO18_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO19_STATUS // Description : GPIO status @@ -3313,67 +3257,64 @@ #define IO_BANK0_GPIO19_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO19_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO19_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO19_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO19_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO19_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO19_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO19_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO19_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO19_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO19_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO19_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO19_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO19_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO19_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO19_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO19_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO19_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO19_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO19_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO19_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO19_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO19_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO19_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO19_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO19_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO19_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO19_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO19_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO19_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO19_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO19_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO19_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO19_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3387,20 +3328,20 @@ // 0x07 -> pio1_19 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PWM_B_1 _u(0x04) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_SIO_19 _u(0x05) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PIO0_19 _u(0x06) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PIO1_19 _u(0x07) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_UART0_RTS _u(0x02) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PWM_B_1 _u(0x04) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_SIO_19 _u(0x05) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PIO0_19 _u(0x06) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_PIO1_19 _u(0x07) #define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO19_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO20_STATUS // Description : GPIO status @@ -3481,67 +3422,64 @@ #define IO_BANK0_GPIO20_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO20_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO20_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO20_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO20_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO20_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO20_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO20_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO20_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO20_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO20_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO20_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO20_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO20_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO20_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO20_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO20_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO20_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO20_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO20_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO20_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO20_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO20_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO20_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO20_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO20_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO20_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO20_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO20_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO20_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO20_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO20_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO20_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO20_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3556,21 +3494,21 @@ // 0x08 -> clocks_gpin_0 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PWM_A_2 _u(0x04) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_SIO_20 _u(0x05) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PIO0_20 _u(0x06) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PIO1_20 _u(0x07) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_CLOCKS_GPIN_0 _u(0x08) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_SPI0_RX _u(0x01) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PWM_A_2 _u(0x04) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_SIO_20 _u(0x05) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PIO0_20 _u(0x06) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_PIO1_20 _u(0x07) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_CLOCKS_GPIN_0 _u(0x08) #define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO20_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO21_STATUS // Description : GPIO status @@ -3651,67 +3589,64 @@ #define IO_BANK0_GPIO21_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO21_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO21_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO21_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO21_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO21_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO21_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO21_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO21_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO21_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO21_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO21_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO21_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO21_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO21_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO21_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO21_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO21_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO21_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO21_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO21_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO21_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO21_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO21_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO21_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO21_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO21_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO21_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO21_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO21_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO21_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO21_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO21_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO21_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3726,21 +3661,21 @@ // 0x08 -> clocks_gpout_0 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PWM_B_2 _u(0x04) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_SIO_21 _u(0x05) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PIO0_21 _u(0x06) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PIO1_21 _u(0x07) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_0 _u(0x08) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_SPI0_SS_N _u(0x01) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PWM_B_2 _u(0x04) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_SIO_21 _u(0x05) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PIO0_21 _u(0x06) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_PIO1_21 _u(0x07) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_0 _u(0x08) #define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO21_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO22_STATUS // Description : GPIO status @@ -3821,67 +3756,64 @@ #define IO_BANK0_GPIO22_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO22_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO22_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO22_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO22_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO22_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO22_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO22_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO22_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO22_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO22_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO22_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO22_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO22_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO22_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO22_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO22_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO22_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO22_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO22_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO22_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO22_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO22_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO22_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO22_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO22_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO22_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO22_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO22_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO22_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO22_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO22_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO22_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO22_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -3896,21 +3828,21 @@ // 0x08 -> clocks_gpin_1 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PWM_A_3 _u(0x04) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_SIO_22 _u(0x05) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PIO0_22 _u(0x06) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PIO1_22 _u(0x07) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_CLOCKS_GPIN_1 _u(0x08) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_SPI0_SCLK _u(0x01) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PWM_A_3 _u(0x04) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_SIO_22 _u(0x05) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PIO0_22 _u(0x06) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_PIO1_22 _u(0x07) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_CLOCKS_GPIN_1 _u(0x08) #define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO22_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO23_STATUS // Description : GPIO status @@ -3991,67 +3923,64 @@ #define IO_BANK0_GPIO23_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO23_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO23_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO23_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO23_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO23_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO23_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO23_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO23_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO23_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO23_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO23_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO23_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO23_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO23_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO23_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO23_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO23_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO23_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO23_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO23_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO23_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO23_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO23_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO23_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO23_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO23_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO23_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO23_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO23_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO23_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO23_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO23_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO23_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4066,21 +3995,21 @@ // 0x08 -> clocks_gpout_1 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PWM_B_3 _u(0x04) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_SIO_23 _u(0x05) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PIO0_23 _u(0x06) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PIO1_23 _u(0x07) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_1 _u(0x08) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_SPI0_TX _u(0x01) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PWM_B_3 _u(0x04) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_SIO_23 _u(0x05) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PIO0_23 _u(0x06) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_PIO1_23 _u(0x07) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_1 _u(0x08) #define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO23_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO24_STATUS // Description : GPIO status @@ -4161,67 +4090,64 @@ #define IO_BANK0_GPIO24_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO24_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO24_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO24_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO24_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO24_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO24_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO24_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO24_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO24_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO24_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO24_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO24_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO24_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO24_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO24_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO24_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO24_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO24_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO24_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO24_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO24_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO24_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO24_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO24_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO24_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO24_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO24_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO24_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO24_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO24_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO24_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO24_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO24_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4236,21 +4162,21 @@ // 0x08 -> clocks_gpout_2 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PWM_A_4 _u(0x04) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_SIO_24 _u(0x05) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PIO0_24 _u(0x06) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PIO1_24 _u(0x07) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_2 _u(0x08) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_UART1_TX _u(0x02) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PWM_A_4 _u(0x04) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_SIO_24 _u(0x05) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PIO0_24 _u(0x06) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_PIO1_24 _u(0x07) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_2 _u(0x08) #define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO24_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO25_STATUS // Description : GPIO status @@ -4331,67 +4257,64 @@ #define IO_BANK0_GPIO25_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO25_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO25_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO25_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO25_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO25_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO25_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO25_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO25_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO25_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO25_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO25_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO25_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO25_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO25_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO25_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO25_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO25_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO25_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO25_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO25_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO25_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO25_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO25_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO25_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO25_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO25_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO25_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO25_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO25_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO25_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO25_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO25_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO25_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4406,21 +4329,21 @@ // 0x08 -> clocks_gpout_3 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PWM_B_4 _u(0x04) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_SIO_25 _u(0x05) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PIO0_25 _u(0x06) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PIO1_25 _u(0x07) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_3 _u(0x08) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_UART1_RX _u(0x02) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PWM_B_4 _u(0x04) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_SIO_25 _u(0x05) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PIO0_25 _u(0x06) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_PIO1_25 _u(0x07) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_CLOCKS_GPOUT_3 _u(0x08) #define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO25_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO26_STATUS // Description : GPIO status @@ -4501,67 +4424,64 @@ #define IO_BANK0_GPIO26_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO26_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO26_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO26_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO26_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO26_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO26_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO26_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO26_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO26_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO26_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO26_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO26_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO26_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO26_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO26_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO26_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO26_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO26_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO26_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO26_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO26_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO26_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO26_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO26_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO26_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO26_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO26_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO26_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO26_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO26_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO26_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO26_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO26_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4575,20 +4495,20 @@ // 0x07 -> pio1_26 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PWM_A_5 _u(0x04) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_SIO_26 _u(0x05) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PIO0_26 _u(0x06) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PIO1_26 _u(0x07) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_SPI1_SCLK _u(0x01) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_UART1_CTS _u(0x02) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_I2C1_SDA _u(0x03) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PWM_A_5 _u(0x04) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_SIO_26 _u(0x05) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PIO0_26 _u(0x06) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_PIO1_26 _u(0x07) #define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO26_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO27_STATUS // Description : GPIO status @@ -4669,67 +4589,64 @@ #define IO_BANK0_GPIO27_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO27_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO27_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO27_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO27_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO27_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO27_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO27_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO27_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO27_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO27_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO27_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO27_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO27_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO27_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO27_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO27_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO27_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO27_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO27_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO27_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO27_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO27_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO27_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO27_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO27_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO27_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO27_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO27_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO27_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO27_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO27_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO27_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO27_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4743,20 +4660,20 @@ // 0x07 -> pio1_27 // 0x09 -> usb_muxing_overcurr_detect // 0x1f -> null -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PWM_B_5 _u(0x04) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_SIO_27 _u(0x05) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PIO0_27 _u(0x06) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PIO1_27 _u(0x07) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_SPI1_TX _u(0x01) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_UART1_RTS _u(0x02) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_I2C1_SCL _u(0x03) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PWM_B_5 _u(0x04) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_SIO_27 _u(0x05) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PIO0_27 _u(0x06) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_PIO1_27 _u(0x07) #define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_USB_MUXING_OVERCURR_DETECT _u(0x09) -#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO27_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO28_STATUS // Description : GPIO status @@ -4837,67 +4754,64 @@ #define IO_BANK0_GPIO28_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO28_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO28_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO28_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO28_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO28_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO28_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO28_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO28_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO28_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO28_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO28_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO28_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO28_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO28_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO28_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO28_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO28_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO28_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO28_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO28_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO28_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO28_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO28_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO28_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO28_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO28_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO28_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO28_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO28_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO28_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO28_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO28_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO28_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -4911,20 +4825,20 @@ // 0x07 -> pio1_28 // 0x09 -> usb_muxing_vbus_detect // 0x1f -> null -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PWM_A_6 _u(0x04) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_SIO_28 _u(0x05) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PIO0_28 _u(0x06) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PIO1_28 _u(0x07) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_SPI1_RX _u(0x01) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_UART0_TX _u(0x02) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_I2C0_SDA _u(0x03) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PWM_A_6 _u(0x04) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_SIO_28 _u(0x05) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PIO0_28 _u(0x06) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_PIO1_28 _u(0x07) #define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_DETECT _u(0x09) -#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO28_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_GPIO29_STATUS // Description : GPIO status @@ -5005,67 +4919,64 @@ #define IO_BANK0_GPIO29_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO29_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_BANK0_GPIO29_CTRL_IRQOVER_RESET _u(0x0) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_MSB _u(29) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_LSB _u(28) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_ACCESS "RW" +#define IO_BANK0_GPIO29_CTRL_IRQOVER_RESET _u(0x0) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_MSB _u(29) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_LSB _u(28) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_ACCESS "RW" #define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO29_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO29_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_BANK0_GPIO29_CTRL_INOVER_RESET _u(0x0) -#define IO_BANK0_GPIO29_CTRL_INOVER_BITS _u(0x00030000) -#define IO_BANK0_GPIO29_CTRL_INOVER_MSB _u(17) -#define IO_BANK0_GPIO29_CTRL_INOVER_LSB _u(16) -#define IO_BANK0_GPIO29_CTRL_INOVER_ACCESS "RW" +#define IO_BANK0_GPIO29_CTRL_INOVER_RESET _u(0x0) +#define IO_BANK0_GPIO29_CTRL_INOVER_BITS _u(0x00030000) +#define IO_BANK0_GPIO29_CTRL_INOVER_MSB _u(17) +#define IO_BANK0_GPIO29_CTRL_INOVER_LSB _u(16) +#define IO_BANK0_GPIO29_CTRL_INOVER_ACCESS "RW" #define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO29_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO29_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_BANK0_GPIO29_CTRL_OEOVER_RESET _u(0x0) -#define IO_BANK0_GPIO29_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_BANK0_GPIO29_CTRL_OEOVER_MSB _u(13) -#define IO_BANK0_GPIO29_CTRL_OEOVER_LSB _u(12) -#define IO_BANK0_GPIO29_CTRL_OEOVER_ACCESS "RW" -#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_BANK0_GPIO29_CTRL_OEOVER_RESET _u(0x0) +#define IO_BANK0_GPIO29_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_BANK0_GPIO29_CTRL_OEOVER_MSB _u(13) +#define IO_BANK0_GPIO29_CTRL_OEOVER_LSB _u(12) +#define IO_BANK0_GPIO29_CTRL_OEOVER_ACCESS "RW" +#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_BANK0_GPIO29_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO29_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_BANK0_GPIO29_CTRL_OUTOVER_RESET _u(0x0) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_MSB _u(9) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_LSB _u(8) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_ACCESS "RW" +#define IO_BANK0_GPIO29_CTRL_OUTOVER_RESET _u(0x0) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_MSB _u(9) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_LSB _u(8) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_ACCESS "RW" #define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_BANK0_GPIO29_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_BANK0_GPIO29_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -5079,20 +4990,20 @@ // 0x07 -> pio1_29 // 0x09 -> usb_muxing_vbus_en // 0x1f -> null -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_MSB _u(4) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_LSB _u(0) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_ACCESS "RW" -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PWM_B_6 _u(0x04) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_SIO_29 _u(0x05) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PIO0_29 _u(0x06) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PIO1_29 _u(0x07) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_MSB _u(4) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_LSB _u(0) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_ACCESS "RW" +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_SPI1_SS_N _u(0x01) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_UART0_RX _u(0x02) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_I2C0_SCL _u(0x03) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PWM_B_6 _u(0x04) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_SIO_29 _u(0x05) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PIO0_29 _u(0x06) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_PIO1_29 _u(0x07) #define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_USB_MUXING_VBUS_EN _u(0x09) -#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_BANK0_GPIO29_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_BANK0_INTR0 // Description : Raw Interrupts @@ -5101,7 +5012,6 @@ #define IO_BANK0_INTR0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_INTR0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -5109,7 +5019,6 @@ #define IO_BANK0_INTR0_GPIO7_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_INTR0_GPIO7_EDGE_LOW_MSB _u(30) @@ -5117,7 +5026,6 @@ #define IO_BANK0_INTR0_GPIO7_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_INTR0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -5125,7 +5033,6 @@ #define IO_BANK0_INTR0_GPIO7_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_INTR0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -5133,7 +5040,6 @@ #define IO_BANK0_INTR0_GPIO7_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_INTR0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -5141,7 +5047,6 @@ #define IO_BANK0_INTR0_GPIO6_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_INTR0_GPIO6_EDGE_LOW_MSB _u(26) @@ -5149,7 +5054,6 @@ #define IO_BANK0_INTR0_GPIO6_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_INTR0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -5157,7 +5061,6 @@ #define IO_BANK0_INTR0_GPIO6_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_INTR0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -5165,7 +5068,6 @@ #define IO_BANK0_INTR0_GPIO6_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_INTR0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -5173,7 +5075,6 @@ #define IO_BANK0_INTR0_GPIO5_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_INTR0_GPIO5_EDGE_LOW_MSB _u(22) @@ -5181,7 +5082,6 @@ #define IO_BANK0_INTR0_GPIO5_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_INTR0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -5189,7 +5089,6 @@ #define IO_BANK0_INTR0_GPIO5_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_INTR0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -5197,7 +5096,6 @@ #define IO_BANK0_INTR0_GPIO5_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_INTR0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -5205,7 +5103,6 @@ #define IO_BANK0_INTR0_GPIO4_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_INTR0_GPIO4_EDGE_LOW_MSB _u(18) @@ -5213,7 +5110,6 @@ #define IO_BANK0_INTR0_GPIO4_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_INTR0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -5221,7 +5117,6 @@ #define IO_BANK0_INTR0_GPIO4_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_INTR0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -5229,7 +5124,6 @@ #define IO_BANK0_INTR0_GPIO4_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_INTR0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -5237,7 +5131,6 @@ #define IO_BANK0_INTR0_GPIO3_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_INTR0_GPIO3_EDGE_LOW_MSB _u(14) @@ -5245,7 +5138,6 @@ #define IO_BANK0_INTR0_GPIO3_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_INTR0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -5253,7 +5145,6 @@ #define IO_BANK0_INTR0_GPIO3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_INTR0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -5261,7 +5152,6 @@ #define IO_BANK0_INTR0_GPIO3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_INTR0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -5269,7 +5159,6 @@ #define IO_BANK0_INTR0_GPIO2_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_INTR0_GPIO2_EDGE_LOW_MSB _u(10) @@ -5277,7 +5166,6 @@ #define IO_BANK0_INTR0_GPIO2_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_INTR0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -5285,7 +5173,6 @@ #define IO_BANK0_INTR0_GPIO2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_INTR0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -5293,7 +5180,6 @@ #define IO_BANK0_INTR0_GPIO2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_INTR0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -5301,7 +5187,6 @@ #define IO_BANK0_INTR0_GPIO1_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_INTR0_GPIO1_EDGE_LOW_MSB _u(6) @@ -5309,7 +5194,6 @@ #define IO_BANK0_INTR0_GPIO1_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_INTR0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -5317,7 +5201,6 @@ #define IO_BANK0_INTR0_GPIO1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_INTR0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -5325,7 +5208,6 @@ #define IO_BANK0_INTR0_GPIO1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_INTR0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -5333,7 +5215,6 @@ #define IO_BANK0_INTR0_GPIO0_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_INTR0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_INTR0_GPIO0_EDGE_LOW_MSB _u(2) @@ -5341,7 +5222,6 @@ #define IO_BANK0_INTR0_GPIO0_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_INTR0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -5349,7 +5229,6 @@ #define IO_BANK0_INTR0_GPIO0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_INTR0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_INTR0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -5363,7 +5242,6 @@ #define IO_BANK0_INTR1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_INTR1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -5371,7 +5249,6 @@ #define IO_BANK0_INTR1_GPIO15_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_INTR1_GPIO15_EDGE_LOW_MSB _u(30) @@ -5379,7 +5256,6 @@ #define IO_BANK0_INTR1_GPIO15_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_INTR1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -5387,7 +5263,6 @@ #define IO_BANK0_INTR1_GPIO15_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_INTR1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -5395,7 +5270,6 @@ #define IO_BANK0_INTR1_GPIO15_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_INTR1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -5403,7 +5277,6 @@ #define IO_BANK0_INTR1_GPIO14_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_INTR1_GPIO14_EDGE_LOW_MSB _u(26) @@ -5411,7 +5284,6 @@ #define IO_BANK0_INTR1_GPIO14_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_INTR1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -5419,7 +5291,6 @@ #define IO_BANK0_INTR1_GPIO14_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_INTR1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -5427,7 +5298,6 @@ #define IO_BANK0_INTR1_GPIO14_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_INTR1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -5435,7 +5305,6 @@ #define IO_BANK0_INTR1_GPIO13_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_INTR1_GPIO13_EDGE_LOW_MSB _u(22) @@ -5443,7 +5312,6 @@ #define IO_BANK0_INTR1_GPIO13_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_INTR1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -5451,7 +5319,6 @@ #define IO_BANK0_INTR1_GPIO13_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_INTR1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -5459,7 +5326,6 @@ #define IO_BANK0_INTR1_GPIO13_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_INTR1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -5467,7 +5333,6 @@ #define IO_BANK0_INTR1_GPIO12_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_INTR1_GPIO12_EDGE_LOW_MSB _u(18) @@ -5475,7 +5340,6 @@ #define IO_BANK0_INTR1_GPIO12_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_INTR1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -5483,7 +5347,6 @@ #define IO_BANK0_INTR1_GPIO12_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_INTR1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -5491,7 +5354,6 @@ #define IO_BANK0_INTR1_GPIO12_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_INTR1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -5499,7 +5361,6 @@ #define IO_BANK0_INTR1_GPIO11_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_INTR1_GPIO11_EDGE_LOW_MSB _u(14) @@ -5507,7 +5368,6 @@ #define IO_BANK0_INTR1_GPIO11_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_INTR1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -5515,7 +5375,6 @@ #define IO_BANK0_INTR1_GPIO11_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_INTR1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -5523,7 +5382,6 @@ #define IO_BANK0_INTR1_GPIO11_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_INTR1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -5531,7 +5389,6 @@ #define IO_BANK0_INTR1_GPIO10_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_INTR1_GPIO10_EDGE_LOW_MSB _u(10) @@ -5539,7 +5396,6 @@ #define IO_BANK0_INTR1_GPIO10_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_INTR1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -5547,7 +5403,6 @@ #define IO_BANK0_INTR1_GPIO10_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_INTR1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -5555,7 +5410,6 @@ #define IO_BANK0_INTR1_GPIO10_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_INTR1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -5563,7 +5417,6 @@ #define IO_BANK0_INTR1_GPIO9_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_INTR1_GPIO9_EDGE_LOW_MSB _u(6) @@ -5571,7 +5424,6 @@ #define IO_BANK0_INTR1_GPIO9_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_INTR1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -5579,7 +5431,6 @@ #define IO_BANK0_INTR1_GPIO9_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_INTR1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -5587,7 +5438,6 @@ #define IO_BANK0_INTR1_GPIO9_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_INTR1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -5595,7 +5445,6 @@ #define IO_BANK0_INTR1_GPIO8_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_INTR1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_INTR1_GPIO8_EDGE_LOW_MSB _u(2) @@ -5603,7 +5452,6 @@ #define IO_BANK0_INTR1_GPIO8_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_INTR1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -5611,7 +5459,6 @@ #define IO_BANK0_INTR1_GPIO8_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_INTR1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_INTR1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -5625,7 +5472,6 @@ #define IO_BANK0_INTR2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_INTR2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -5633,7 +5479,6 @@ #define IO_BANK0_INTR2_GPIO23_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_INTR2_GPIO23_EDGE_LOW_MSB _u(30) @@ -5641,7 +5486,6 @@ #define IO_BANK0_INTR2_GPIO23_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_INTR2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -5649,7 +5493,6 @@ #define IO_BANK0_INTR2_GPIO23_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_INTR2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -5657,7 +5500,6 @@ #define IO_BANK0_INTR2_GPIO23_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_INTR2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -5665,7 +5507,6 @@ #define IO_BANK0_INTR2_GPIO22_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_INTR2_GPIO22_EDGE_LOW_MSB _u(26) @@ -5673,7 +5514,6 @@ #define IO_BANK0_INTR2_GPIO22_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_INTR2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -5681,7 +5521,6 @@ #define IO_BANK0_INTR2_GPIO22_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_INTR2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -5689,7 +5528,6 @@ #define IO_BANK0_INTR2_GPIO22_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_INTR2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -5697,7 +5535,6 @@ #define IO_BANK0_INTR2_GPIO21_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_INTR2_GPIO21_EDGE_LOW_MSB _u(22) @@ -5705,7 +5542,6 @@ #define IO_BANK0_INTR2_GPIO21_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_INTR2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -5713,7 +5549,6 @@ #define IO_BANK0_INTR2_GPIO21_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_INTR2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -5721,7 +5556,6 @@ #define IO_BANK0_INTR2_GPIO21_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_INTR2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -5729,7 +5563,6 @@ #define IO_BANK0_INTR2_GPIO20_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_INTR2_GPIO20_EDGE_LOW_MSB _u(18) @@ -5737,7 +5570,6 @@ #define IO_BANK0_INTR2_GPIO20_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_INTR2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -5745,7 +5577,6 @@ #define IO_BANK0_INTR2_GPIO20_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_INTR2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -5753,7 +5584,6 @@ #define IO_BANK0_INTR2_GPIO20_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_INTR2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -5761,7 +5591,6 @@ #define IO_BANK0_INTR2_GPIO19_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_INTR2_GPIO19_EDGE_LOW_MSB _u(14) @@ -5769,7 +5598,6 @@ #define IO_BANK0_INTR2_GPIO19_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_INTR2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -5777,7 +5605,6 @@ #define IO_BANK0_INTR2_GPIO19_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_INTR2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -5785,7 +5612,6 @@ #define IO_BANK0_INTR2_GPIO19_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_INTR2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -5793,7 +5619,6 @@ #define IO_BANK0_INTR2_GPIO18_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_INTR2_GPIO18_EDGE_LOW_MSB _u(10) @@ -5801,7 +5626,6 @@ #define IO_BANK0_INTR2_GPIO18_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_INTR2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -5809,7 +5633,6 @@ #define IO_BANK0_INTR2_GPIO18_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_INTR2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -5817,7 +5640,6 @@ #define IO_BANK0_INTR2_GPIO18_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_INTR2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -5825,7 +5647,6 @@ #define IO_BANK0_INTR2_GPIO17_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_INTR2_GPIO17_EDGE_LOW_MSB _u(6) @@ -5833,7 +5654,6 @@ #define IO_BANK0_INTR2_GPIO17_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_INTR2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -5841,7 +5661,6 @@ #define IO_BANK0_INTR2_GPIO17_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_INTR2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -5849,7 +5668,6 @@ #define IO_BANK0_INTR2_GPIO17_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_INTR2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -5857,7 +5675,6 @@ #define IO_BANK0_INTR2_GPIO16_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_INTR2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_INTR2_GPIO16_EDGE_LOW_MSB _u(2) @@ -5865,7 +5682,6 @@ #define IO_BANK0_INTR2_GPIO16_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_INTR2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -5873,7 +5689,6 @@ #define IO_BANK0_INTR2_GPIO16_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_INTR2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_INTR2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -5887,7 +5702,6 @@ #define IO_BANK0_INTR3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_INTR3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -5895,7 +5709,6 @@ #define IO_BANK0_INTR3_GPIO29_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_INTR3_GPIO29_EDGE_LOW_MSB _u(22) @@ -5903,7 +5716,6 @@ #define IO_BANK0_INTR3_GPIO29_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_INTR3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -5911,7 +5723,6 @@ #define IO_BANK0_INTR3_GPIO29_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_INTR3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -5919,7 +5730,6 @@ #define IO_BANK0_INTR3_GPIO29_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_INTR3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -5927,7 +5737,6 @@ #define IO_BANK0_INTR3_GPIO28_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_INTR3_GPIO28_EDGE_LOW_MSB _u(18) @@ -5935,7 +5744,6 @@ #define IO_BANK0_INTR3_GPIO28_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_INTR3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -5943,7 +5751,6 @@ #define IO_BANK0_INTR3_GPIO28_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_INTR3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -5951,7 +5758,6 @@ #define IO_BANK0_INTR3_GPIO28_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_INTR3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -5959,7 +5765,6 @@ #define IO_BANK0_INTR3_GPIO27_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_INTR3_GPIO27_EDGE_LOW_MSB _u(14) @@ -5967,7 +5772,6 @@ #define IO_BANK0_INTR3_GPIO27_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_INTR3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -5975,7 +5779,6 @@ #define IO_BANK0_INTR3_GPIO27_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_INTR3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -5983,7 +5786,6 @@ #define IO_BANK0_INTR3_GPIO27_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_INTR3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -5991,7 +5793,6 @@ #define IO_BANK0_INTR3_GPIO26_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_INTR3_GPIO26_EDGE_LOW_MSB _u(10) @@ -5999,7 +5800,6 @@ #define IO_BANK0_INTR3_GPIO26_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_INTR3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -6007,7 +5807,6 @@ #define IO_BANK0_INTR3_GPIO26_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_INTR3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -6015,7 +5814,6 @@ #define IO_BANK0_INTR3_GPIO26_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_INTR3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -6023,7 +5821,6 @@ #define IO_BANK0_INTR3_GPIO25_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_INTR3_GPIO25_EDGE_LOW_MSB _u(6) @@ -6031,7 +5828,6 @@ #define IO_BANK0_INTR3_GPIO25_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_INTR3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -6039,7 +5835,6 @@ #define IO_BANK0_INTR3_GPIO25_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_INTR3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -6047,7 +5842,6 @@ #define IO_BANK0_INTR3_GPIO25_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_INTR3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -6055,7 +5849,6 @@ #define IO_BANK0_INTR3_GPIO24_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_INTR3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_INTR3_GPIO24_EDGE_LOW_MSB _u(2) @@ -6063,7 +5856,6 @@ #define IO_BANK0_INTR3_GPIO24_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_INTR3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_INTR3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -6071,7 +5863,6 @@ #define IO_BANK0_INTR3_GPIO24_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_INTR3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_INTR3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_INTR3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_INTR3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -6085,7 +5876,6 @@ #define IO_BANK0_PROC0_INTE0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -6093,7 +5883,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_LOW_MSB _u(30) @@ -6101,7 +5890,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -6109,7 +5897,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -6117,7 +5904,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -6125,7 +5911,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_LOW_MSB _u(26) @@ -6133,7 +5918,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -6141,7 +5925,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -6149,7 +5932,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -6157,7 +5939,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_LOW_MSB _u(22) @@ -6165,7 +5946,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -6173,7 +5953,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -6181,7 +5960,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -6189,7 +5967,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_LOW_MSB _u(18) @@ -6197,7 +5974,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -6205,7 +5981,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -6213,7 +5988,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -6221,7 +5995,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_LOW_MSB _u(14) @@ -6229,7 +6002,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -6237,7 +6009,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -6245,7 +6016,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -6253,7 +6023,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_LOW_MSB _u(10) @@ -6261,7 +6030,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -6269,7 +6037,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -6277,7 +6044,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -6285,7 +6051,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_LOW_MSB _u(6) @@ -6293,7 +6058,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -6301,7 +6065,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -6309,7 +6072,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -6317,7 +6079,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_LOW_MSB _u(2) @@ -6325,7 +6086,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -6333,7 +6093,6 @@ #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTE0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -6347,7 +6106,6 @@ #define IO_BANK0_PROC0_INTE1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -6355,7 +6113,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_LOW_MSB _u(30) @@ -6363,7 +6120,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -6371,7 +6127,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -6379,7 +6134,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -6387,7 +6141,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_LOW_MSB _u(26) @@ -6395,7 +6148,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -6403,7 +6155,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -6411,7 +6162,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -6419,7 +6169,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_LOW_MSB _u(22) @@ -6427,7 +6176,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -6435,7 +6183,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -6443,7 +6190,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -6451,7 +6197,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_LOW_MSB _u(18) @@ -6459,7 +6204,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -6467,7 +6211,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -6475,7 +6218,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -6483,7 +6225,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_LOW_MSB _u(14) @@ -6491,7 +6232,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -6499,7 +6239,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -6507,7 +6246,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -6515,7 +6253,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_LOW_MSB _u(10) @@ -6523,7 +6260,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -6531,7 +6267,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -6539,7 +6274,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -6547,7 +6281,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_LOW_MSB _u(6) @@ -6555,7 +6288,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -6563,7 +6295,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -6571,7 +6302,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -6579,7 +6309,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_LOW_MSB _u(2) @@ -6587,7 +6316,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -6595,7 +6323,6 @@ #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTE1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -6609,7 +6336,6 @@ #define IO_BANK0_PROC0_INTE2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -6617,7 +6343,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_LOW_MSB _u(30) @@ -6625,7 +6350,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -6633,7 +6357,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -6641,7 +6364,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -6649,7 +6371,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_LOW_MSB _u(26) @@ -6657,7 +6378,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -6665,7 +6385,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -6673,7 +6392,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -6681,7 +6399,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_LOW_MSB _u(22) @@ -6689,7 +6406,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -6697,7 +6413,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -6705,7 +6420,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -6713,7 +6427,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_LOW_MSB _u(18) @@ -6721,7 +6434,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -6729,7 +6441,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -6737,7 +6448,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -6745,7 +6455,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_LOW_MSB _u(14) @@ -6753,7 +6462,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -6761,7 +6469,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -6769,7 +6476,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -6777,7 +6483,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_LOW_MSB _u(10) @@ -6785,7 +6490,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -6793,7 +6497,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -6801,7 +6504,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -6809,7 +6511,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_LOW_MSB _u(6) @@ -6817,7 +6518,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -6825,7 +6525,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -6833,7 +6532,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -6841,7 +6539,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_LOW_MSB _u(2) @@ -6849,7 +6546,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -6857,7 +6553,6 @@ #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTE2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -6871,7 +6566,6 @@ #define IO_BANK0_PROC0_INTE3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -6879,7 +6573,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_LOW_MSB _u(22) @@ -6887,7 +6580,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -6895,7 +6587,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -6903,7 +6594,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -6911,7 +6601,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_LOW_MSB _u(18) @@ -6919,7 +6608,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -6927,7 +6615,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -6935,7 +6622,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -6943,7 +6629,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_LOW_MSB _u(14) @@ -6951,7 +6636,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -6959,7 +6643,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -6967,7 +6650,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -6975,7 +6657,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_LOW_MSB _u(10) @@ -6983,7 +6664,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -6991,7 +6671,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -6999,7 +6678,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -7007,7 +6685,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_LOW_MSB _u(6) @@ -7015,7 +6692,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -7023,7 +6699,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -7031,7 +6706,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -7039,7 +6713,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_LOW_MSB _u(2) @@ -7047,7 +6720,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -7055,7 +6727,6 @@ #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTE3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -7069,7 +6740,6 @@ #define IO_BANK0_PROC0_INTF0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -7077,7 +6747,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_LOW_MSB _u(30) @@ -7085,7 +6754,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -7093,7 +6761,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -7101,7 +6768,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -7109,7 +6775,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_LOW_MSB _u(26) @@ -7117,7 +6782,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -7125,7 +6789,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -7133,7 +6796,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -7141,7 +6803,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_LOW_MSB _u(22) @@ -7149,7 +6810,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -7157,7 +6817,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -7165,7 +6824,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -7173,7 +6831,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_LOW_MSB _u(18) @@ -7181,7 +6838,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -7189,7 +6845,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -7197,7 +6852,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -7205,7 +6859,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_LOW_MSB _u(14) @@ -7213,7 +6866,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -7221,7 +6873,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -7229,7 +6880,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -7237,7 +6887,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_LOW_MSB _u(10) @@ -7245,7 +6894,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -7253,7 +6901,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -7261,7 +6908,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -7269,7 +6915,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_LOW_MSB _u(6) @@ -7277,7 +6922,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -7285,7 +6929,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -7293,7 +6936,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -7301,7 +6943,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_LOW_MSB _u(2) @@ -7309,7 +6950,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -7317,7 +6957,6 @@ #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTF0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -7331,7 +6970,6 @@ #define IO_BANK0_PROC0_INTF1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -7339,7 +6977,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_LOW_MSB _u(30) @@ -7347,7 +6984,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -7355,7 +6991,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -7363,7 +6998,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -7371,7 +7005,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_LOW_MSB _u(26) @@ -7379,7 +7012,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -7387,7 +7019,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -7395,7 +7026,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -7403,7 +7033,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_LOW_MSB _u(22) @@ -7411,7 +7040,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -7419,7 +7047,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -7427,7 +7054,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -7435,7 +7061,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_LOW_MSB _u(18) @@ -7443,7 +7068,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -7451,7 +7075,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -7459,7 +7082,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -7467,7 +7089,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_LOW_MSB _u(14) @@ -7475,7 +7096,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -7483,7 +7103,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -7491,7 +7110,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -7499,7 +7117,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_LOW_MSB _u(10) @@ -7507,7 +7124,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -7515,7 +7131,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -7523,7 +7138,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -7531,7 +7145,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_LOW_MSB _u(6) @@ -7539,7 +7152,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -7547,7 +7159,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -7555,7 +7166,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -7563,7 +7173,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_LOW_MSB _u(2) @@ -7571,7 +7180,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -7579,7 +7187,6 @@ #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTF1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -7593,7 +7200,6 @@ #define IO_BANK0_PROC0_INTF2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -7601,7 +7207,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_LOW_MSB _u(30) @@ -7609,7 +7214,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -7617,7 +7221,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -7625,7 +7228,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -7633,7 +7235,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_LOW_MSB _u(26) @@ -7641,7 +7242,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -7649,7 +7249,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -7657,7 +7256,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -7665,7 +7263,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_LOW_MSB _u(22) @@ -7673,7 +7270,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -7681,7 +7277,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -7689,7 +7284,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -7697,7 +7291,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_LOW_MSB _u(18) @@ -7705,7 +7298,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -7713,7 +7305,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -7721,7 +7312,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -7729,7 +7319,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_LOW_MSB _u(14) @@ -7737,7 +7326,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -7745,7 +7333,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -7753,7 +7340,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -7761,7 +7347,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_LOW_MSB _u(10) @@ -7769,7 +7354,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -7777,7 +7361,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -7785,7 +7368,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -7793,7 +7375,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_LOW_MSB _u(6) @@ -7801,7 +7382,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -7809,7 +7389,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -7817,7 +7396,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -7825,7 +7403,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_LOW_MSB _u(2) @@ -7833,7 +7410,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -7841,7 +7417,6 @@ #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTF2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -7855,7 +7430,6 @@ #define IO_BANK0_PROC0_INTF3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -7863,7 +7437,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_LOW_MSB _u(22) @@ -7871,7 +7444,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -7879,7 +7451,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -7887,7 +7458,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -7895,7 +7465,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_LOW_MSB _u(18) @@ -7903,7 +7472,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -7911,7 +7479,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -7919,7 +7486,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -7927,7 +7493,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_LOW_MSB _u(14) @@ -7935,7 +7500,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -7943,7 +7507,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -7951,7 +7514,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -7959,7 +7521,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_LOW_MSB _u(10) @@ -7967,7 +7528,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -7975,7 +7535,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -7983,7 +7542,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -7991,7 +7549,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_LOW_MSB _u(6) @@ -7999,7 +7556,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -8007,7 +7563,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -8015,7 +7570,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -8023,7 +7577,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_LOW_MSB _u(2) @@ -8031,7 +7584,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -8039,7 +7591,6 @@ #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTF3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -8053,7 +7604,6 @@ #define IO_BANK0_PROC0_INTS0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -8061,7 +7611,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_LOW_MSB _u(30) @@ -8069,7 +7618,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO7_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -8077,7 +7625,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -8085,7 +7632,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO7_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -8093,7 +7639,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_LOW_MSB _u(26) @@ -8101,7 +7646,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO6_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -8109,7 +7653,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -8117,7 +7660,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO6_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -8125,7 +7667,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_LOW_MSB _u(22) @@ -8133,7 +7674,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO5_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -8141,7 +7681,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -8149,7 +7688,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO5_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -8157,7 +7695,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_LOW_MSB _u(18) @@ -8165,7 +7702,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO4_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -8173,7 +7709,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -8181,7 +7716,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO4_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -8189,7 +7723,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_LOW_MSB _u(14) @@ -8197,7 +7730,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -8205,7 +7737,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -8213,7 +7744,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -8221,7 +7751,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_LOW_MSB _u(10) @@ -8229,7 +7758,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -8237,7 +7765,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -8245,7 +7772,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -8253,7 +7779,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_LOW_MSB _u(6) @@ -8261,7 +7786,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -8269,7 +7793,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -8277,7 +7800,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -8285,7 +7807,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_LOW_MSB _u(2) @@ -8293,7 +7814,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -8301,7 +7821,6 @@ #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTS0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -8315,7 +7834,6 @@ #define IO_BANK0_PROC0_INTS1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -8323,7 +7841,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_LOW_MSB _u(30) @@ -8331,7 +7848,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO15_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -8339,7 +7855,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -8347,7 +7862,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO15_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -8355,7 +7869,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_LOW_MSB _u(26) @@ -8363,7 +7876,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO14_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -8371,7 +7883,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -8379,7 +7890,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO14_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -8387,7 +7897,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_LOW_MSB _u(22) @@ -8395,7 +7904,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO13_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -8403,7 +7911,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -8411,7 +7918,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO13_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -8419,7 +7925,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_LOW_MSB _u(18) @@ -8427,7 +7932,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO12_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -8435,7 +7939,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -8443,7 +7946,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO12_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -8451,7 +7953,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_LOW_MSB _u(14) @@ -8459,7 +7960,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO11_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -8467,7 +7967,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -8475,7 +7974,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO11_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -8483,7 +7981,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_LOW_MSB _u(10) @@ -8491,7 +7988,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO10_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -8499,7 +7995,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -8507,7 +8002,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO10_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -8515,7 +8009,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_LOW_MSB _u(6) @@ -8523,7 +8016,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO9_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -8531,7 +8023,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -8539,7 +8030,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO9_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -8547,7 +8037,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_LOW_MSB _u(2) @@ -8555,7 +8044,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO8_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -8563,7 +8051,6 @@ #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTS1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -8577,7 +8064,6 @@ #define IO_BANK0_PROC0_INTS2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -8585,7 +8071,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_LOW_MSB _u(30) @@ -8593,7 +8078,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO23_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -8601,7 +8085,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -8609,7 +8092,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO23_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -8617,7 +8099,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_LOW_MSB _u(26) @@ -8625,7 +8106,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO22_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -8633,7 +8113,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -8641,7 +8120,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO22_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -8649,7 +8127,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_LOW_MSB _u(22) @@ -8657,7 +8134,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO21_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -8665,7 +8141,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -8673,7 +8148,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO21_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -8681,7 +8155,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_LOW_MSB _u(18) @@ -8689,7 +8162,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO20_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -8697,7 +8169,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -8705,7 +8176,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO20_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -8713,7 +8183,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_LOW_MSB _u(14) @@ -8721,7 +8190,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO19_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -8729,7 +8197,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -8737,7 +8204,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO19_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -8745,7 +8211,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_LOW_MSB _u(10) @@ -8753,7 +8218,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO18_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -8761,7 +8225,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -8769,7 +8232,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO18_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -8777,7 +8239,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_LOW_MSB _u(6) @@ -8785,7 +8246,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO17_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -8793,7 +8253,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -8801,7 +8260,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO17_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -8809,7 +8267,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_LOW_MSB _u(2) @@ -8817,7 +8274,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO16_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -8825,7 +8281,6 @@ #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTS2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -8839,7 +8294,6 @@ #define IO_BANK0_PROC0_INTS3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -8847,7 +8301,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_LOW_MSB _u(22) @@ -8855,7 +8308,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO29_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -8863,7 +8315,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -8871,7 +8322,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO29_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -8879,7 +8329,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_LOW_MSB _u(18) @@ -8887,7 +8336,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO28_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -8895,7 +8343,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -8903,7 +8350,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO28_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -8911,7 +8357,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_LOW_MSB _u(14) @@ -8919,7 +8364,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO27_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -8927,7 +8371,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -8935,7 +8378,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO27_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -8943,7 +8385,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_LOW_MSB _u(10) @@ -8951,7 +8392,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO26_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -8959,7 +8399,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -8967,7 +8406,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO26_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -8975,7 +8413,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_LOW_MSB _u(6) @@ -8983,7 +8420,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO25_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -8991,7 +8427,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -8999,7 +8434,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO25_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -9007,7 +8441,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_LOW_MSB _u(2) @@ -9015,7 +8448,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO24_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -9023,7 +8455,6 @@ #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC0_INTS3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -9037,7 +8468,6 @@ #define IO_BANK0_PROC1_INTE0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -9045,7 +8475,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_LOW_MSB _u(30) @@ -9053,7 +8482,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -9061,7 +8489,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -9069,7 +8496,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -9077,7 +8503,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_LOW_MSB _u(26) @@ -9085,7 +8510,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -9093,7 +8517,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -9101,7 +8524,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -9109,7 +8531,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_LOW_MSB _u(22) @@ -9117,7 +8538,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -9125,7 +8545,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -9133,7 +8552,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -9141,7 +8559,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_LOW_MSB _u(18) @@ -9149,7 +8566,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -9157,7 +8573,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -9165,7 +8580,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -9173,7 +8587,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_LOW_MSB _u(14) @@ -9181,7 +8594,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -9189,7 +8601,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -9197,7 +8608,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -9205,7 +8615,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_LOW_MSB _u(10) @@ -9213,7 +8622,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -9221,7 +8629,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -9229,7 +8636,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -9237,7 +8643,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_LOW_MSB _u(6) @@ -9245,7 +8650,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -9253,7 +8657,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -9261,7 +8664,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -9269,7 +8671,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_LOW_MSB _u(2) @@ -9277,7 +8678,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -9285,7 +8685,6 @@ #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTE0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -9299,7 +8698,6 @@ #define IO_BANK0_PROC1_INTE1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -9307,7 +8705,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_LOW_MSB _u(30) @@ -9315,7 +8712,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -9323,7 +8719,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -9331,7 +8726,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -9339,7 +8733,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_LOW_MSB _u(26) @@ -9347,7 +8740,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -9355,7 +8747,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -9363,7 +8754,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -9371,7 +8761,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_LOW_MSB _u(22) @@ -9379,7 +8768,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -9387,7 +8775,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -9395,7 +8782,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -9403,7 +8789,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_LOW_MSB _u(18) @@ -9411,7 +8796,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -9419,7 +8803,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -9427,7 +8810,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -9435,7 +8817,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_LOW_MSB _u(14) @@ -9443,7 +8824,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -9451,7 +8831,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -9459,7 +8838,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -9467,7 +8845,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_LOW_MSB _u(10) @@ -9475,7 +8852,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -9483,7 +8859,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -9491,7 +8866,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -9499,7 +8873,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_LOW_MSB _u(6) @@ -9507,7 +8880,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -9515,7 +8887,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -9523,7 +8894,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -9531,7 +8901,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_LOW_MSB _u(2) @@ -9539,7 +8908,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -9547,7 +8915,6 @@ #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTE1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -9561,7 +8928,6 @@ #define IO_BANK0_PROC1_INTE2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -9569,7 +8935,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_LOW_MSB _u(30) @@ -9577,7 +8942,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -9585,7 +8949,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -9593,7 +8956,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -9601,7 +8963,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_LOW_MSB _u(26) @@ -9609,7 +8970,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -9617,7 +8977,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -9625,7 +8984,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -9633,7 +8991,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_LOW_MSB _u(22) @@ -9641,7 +8998,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -9649,7 +9005,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -9657,7 +9012,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -9665,7 +9019,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_LOW_MSB _u(18) @@ -9673,7 +9026,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -9681,7 +9033,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -9689,7 +9040,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -9697,7 +9047,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_LOW_MSB _u(14) @@ -9705,7 +9054,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -9713,7 +9061,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -9721,7 +9068,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -9729,7 +9075,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_LOW_MSB _u(10) @@ -9737,7 +9082,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -9745,7 +9089,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -9753,7 +9096,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -9761,7 +9103,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_LOW_MSB _u(6) @@ -9769,7 +9110,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -9777,7 +9117,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -9785,7 +9124,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -9793,7 +9131,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_LOW_MSB _u(2) @@ -9801,7 +9138,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -9809,7 +9145,6 @@ #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTE2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -9823,7 +9158,6 @@ #define IO_BANK0_PROC1_INTE3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -9831,7 +9165,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_LOW_MSB _u(22) @@ -9839,7 +9172,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -9847,7 +9179,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -9855,7 +9186,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -9863,7 +9193,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_LOW_MSB _u(18) @@ -9871,7 +9200,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -9879,7 +9207,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -9887,7 +9214,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -9895,7 +9221,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_LOW_MSB _u(14) @@ -9903,7 +9228,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -9911,7 +9235,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -9919,7 +9242,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -9927,7 +9249,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_LOW_MSB _u(10) @@ -9935,7 +9256,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -9943,7 +9263,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -9951,7 +9270,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -9959,7 +9277,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_LOW_MSB _u(6) @@ -9967,7 +9284,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -9975,7 +9291,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -9983,7 +9298,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -9991,7 +9305,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_LOW_MSB _u(2) @@ -9999,7 +9312,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -10007,7 +9319,6 @@ #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTE3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -10021,7 +9332,6 @@ #define IO_BANK0_PROC1_INTF0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -10029,7 +9339,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_LOW_MSB _u(30) @@ -10037,7 +9346,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -10045,7 +9353,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -10053,7 +9360,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -10061,7 +9367,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_LOW_MSB _u(26) @@ -10069,7 +9374,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -10077,7 +9381,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -10085,7 +9388,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -10093,7 +9395,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_LOW_MSB _u(22) @@ -10101,7 +9402,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -10109,7 +9409,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -10117,7 +9416,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -10125,7 +9423,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_LOW_MSB _u(18) @@ -10133,7 +9430,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -10141,7 +9437,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -10149,7 +9444,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -10157,7 +9451,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_LOW_MSB _u(14) @@ -10165,7 +9458,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -10173,7 +9465,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -10181,7 +9472,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -10189,7 +9479,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_LOW_MSB _u(10) @@ -10197,7 +9486,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -10205,7 +9493,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -10213,7 +9500,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -10221,7 +9507,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_LOW_MSB _u(6) @@ -10229,7 +9514,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -10237,7 +9521,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -10245,7 +9528,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -10253,7 +9535,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_LOW_MSB _u(2) @@ -10261,7 +9542,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -10269,7 +9549,6 @@ #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTF0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -10283,7 +9562,6 @@ #define IO_BANK0_PROC1_INTF1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -10291,7 +9569,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_LOW_MSB _u(30) @@ -10299,7 +9576,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -10307,7 +9583,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -10315,7 +9590,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -10323,7 +9597,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_LOW_MSB _u(26) @@ -10331,7 +9604,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -10339,7 +9611,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -10347,7 +9618,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -10355,7 +9625,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_LOW_MSB _u(22) @@ -10363,7 +9632,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -10371,7 +9639,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -10379,7 +9646,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -10387,7 +9653,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_LOW_MSB _u(18) @@ -10395,7 +9660,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -10403,7 +9667,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -10411,7 +9674,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -10419,7 +9681,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_LOW_MSB _u(14) @@ -10427,7 +9688,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -10435,7 +9695,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -10443,7 +9702,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -10451,7 +9709,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_LOW_MSB _u(10) @@ -10459,7 +9716,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -10467,7 +9723,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -10475,7 +9730,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -10483,7 +9737,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_LOW_MSB _u(6) @@ -10491,7 +9744,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -10499,7 +9751,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -10507,7 +9758,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -10515,7 +9765,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_LOW_MSB _u(2) @@ -10523,7 +9772,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -10531,7 +9779,6 @@ #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTF1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -10545,7 +9792,6 @@ #define IO_BANK0_PROC1_INTF2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -10553,7 +9799,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_LOW_MSB _u(30) @@ -10561,7 +9806,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -10569,7 +9813,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -10577,7 +9820,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -10585,7 +9827,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_LOW_MSB _u(26) @@ -10593,7 +9834,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -10601,7 +9841,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -10609,7 +9848,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -10617,7 +9855,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_LOW_MSB _u(22) @@ -10625,7 +9862,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -10633,7 +9869,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -10641,7 +9876,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -10649,7 +9883,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_LOW_MSB _u(18) @@ -10657,7 +9890,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -10665,7 +9897,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -10673,7 +9904,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -10681,7 +9911,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_LOW_MSB _u(14) @@ -10689,7 +9918,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -10697,7 +9925,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -10705,7 +9932,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -10713,7 +9939,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_LOW_MSB _u(10) @@ -10721,7 +9946,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -10729,7 +9953,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -10737,7 +9960,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -10745,7 +9967,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_LOW_MSB _u(6) @@ -10753,7 +9974,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -10761,7 +9981,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -10769,7 +9988,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -10777,7 +9995,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_LOW_MSB _u(2) @@ -10785,7 +10002,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -10793,7 +10009,6 @@ #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTF2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -10807,7 +10022,6 @@ #define IO_BANK0_PROC1_INTF3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -10815,7 +10029,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_LOW_MSB _u(22) @@ -10823,7 +10036,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -10831,7 +10043,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -10839,7 +10050,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -10847,7 +10057,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_LOW_MSB _u(18) @@ -10855,7 +10064,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -10863,7 +10071,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -10871,7 +10078,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -10879,7 +10085,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_LOW_MSB _u(14) @@ -10887,7 +10092,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -10895,7 +10099,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -10903,7 +10106,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -10911,7 +10113,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_LOW_MSB _u(10) @@ -10919,7 +10120,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -10927,7 +10127,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -10935,7 +10134,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -10943,7 +10141,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_LOW_MSB _u(6) @@ -10951,7 +10148,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -10959,7 +10155,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -10967,7 +10162,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -10975,7 +10169,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_LOW_MSB _u(2) @@ -10983,7 +10176,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -10991,7 +10183,6 @@ #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTF3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -11005,7 +10196,6 @@ #define IO_BANK0_PROC1_INTS0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -11013,7 +10203,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_LOW_MSB _u(30) @@ -11021,7 +10210,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO7_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -11029,7 +10217,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -11037,7 +10224,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO7_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -11045,7 +10231,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_LOW_MSB _u(26) @@ -11053,7 +10238,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO6_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -11061,7 +10245,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -11069,7 +10252,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO6_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -11077,7 +10259,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_LOW_MSB _u(22) @@ -11085,7 +10266,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO5_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -11093,7 +10273,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -11101,7 +10280,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO5_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -11109,7 +10287,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_LOW_MSB _u(18) @@ -11117,7 +10294,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO4_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -11125,7 +10301,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -11133,7 +10308,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO4_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -11141,7 +10315,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_LOW_MSB _u(14) @@ -11149,7 +10322,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -11157,7 +10329,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -11165,7 +10336,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -11173,7 +10343,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_LOW_MSB _u(10) @@ -11181,7 +10350,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -11189,7 +10357,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -11197,7 +10364,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -11205,7 +10371,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_LOW_MSB _u(6) @@ -11213,7 +10378,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -11221,7 +10385,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -11229,7 +10392,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -11237,7 +10399,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_LOW_MSB _u(2) @@ -11245,7 +10406,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -11253,7 +10413,6 @@ #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTS0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -11267,7 +10426,6 @@ #define IO_BANK0_PROC1_INTS1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -11275,7 +10433,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_LOW_MSB _u(30) @@ -11283,7 +10440,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO15_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -11291,7 +10447,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -11299,7 +10454,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO15_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -11307,7 +10461,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_LOW_MSB _u(26) @@ -11315,7 +10468,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO14_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -11323,7 +10475,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -11331,7 +10482,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO14_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -11339,7 +10489,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_LOW_MSB _u(22) @@ -11347,7 +10496,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO13_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -11355,7 +10503,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -11363,7 +10510,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO13_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -11371,7 +10517,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_LOW_MSB _u(18) @@ -11379,7 +10524,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO12_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -11387,7 +10531,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -11395,7 +10538,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO12_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -11403,7 +10545,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_LOW_MSB _u(14) @@ -11411,7 +10552,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO11_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -11419,7 +10559,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -11427,7 +10566,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO11_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -11435,7 +10573,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_LOW_MSB _u(10) @@ -11443,7 +10580,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO10_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -11451,7 +10587,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -11459,7 +10594,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO10_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -11467,7 +10601,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_LOW_MSB _u(6) @@ -11475,7 +10608,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO9_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -11483,7 +10615,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -11491,7 +10622,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO9_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -11499,7 +10629,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_LOW_MSB _u(2) @@ -11507,7 +10636,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO8_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -11515,7 +10643,6 @@ #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTS1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -11529,7 +10656,6 @@ #define IO_BANK0_PROC1_INTS2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -11537,7 +10663,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_LOW_MSB _u(30) @@ -11545,7 +10670,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO23_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -11553,7 +10677,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -11561,7 +10684,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO23_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -11569,7 +10691,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_LOW_MSB _u(26) @@ -11577,7 +10698,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO22_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -11585,7 +10705,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -11593,7 +10712,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO22_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -11601,7 +10719,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_LOW_MSB _u(22) @@ -11609,7 +10726,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO21_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -11617,7 +10733,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -11625,7 +10740,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO21_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -11633,7 +10747,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_LOW_MSB _u(18) @@ -11641,7 +10754,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO20_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -11649,7 +10761,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -11657,7 +10768,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO20_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -11665,7 +10775,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_LOW_MSB _u(14) @@ -11673,7 +10782,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO19_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -11681,7 +10789,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -11689,7 +10796,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO19_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -11697,7 +10803,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_LOW_MSB _u(10) @@ -11705,7 +10810,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO18_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -11713,7 +10817,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -11721,7 +10824,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO18_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -11729,7 +10831,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_LOW_MSB _u(6) @@ -11737,7 +10838,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO17_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -11745,7 +10845,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -11753,7 +10852,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO17_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -11761,7 +10859,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_LOW_MSB _u(2) @@ -11769,7 +10866,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO16_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -11777,7 +10873,6 @@ #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTS2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -11791,7 +10886,6 @@ #define IO_BANK0_PROC1_INTS3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -11799,7 +10893,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_LOW_MSB _u(22) @@ -11807,7 +10900,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO29_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -11815,7 +10907,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -11823,7 +10914,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO29_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -11831,7 +10921,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_LOW_MSB _u(18) @@ -11839,7 +10928,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO28_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -11847,7 +10935,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -11855,7 +10942,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO28_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -11863,7 +10949,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_LOW_MSB _u(14) @@ -11871,7 +10956,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO27_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -11879,7 +10963,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -11887,7 +10970,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO27_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -11895,7 +10977,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_LOW_MSB _u(10) @@ -11903,7 +10984,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO26_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -11911,7 +10991,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -11919,7 +10998,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO26_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -11927,7 +11005,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_LOW_MSB _u(6) @@ -11935,7 +11012,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO25_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -11943,7 +11019,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -11951,7 +11026,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO25_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -11959,7 +11033,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_LOW_MSB _u(2) @@ -11967,7 +11040,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO24_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -11975,7 +11047,6 @@ #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_PROC1_INTS3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -11989,7 +11060,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -11997,7 +11067,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_LOW_MSB _u(30) @@ -12005,7 +11074,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -12013,7 +11081,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -12021,7 +11088,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -12029,7 +11095,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_LOW_MSB _u(26) @@ -12037,7 +11102,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -12045,7 +11109,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -12053,7 +11116,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -12061,7 +11123,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_LOW_MSB _u(22) @@ -12069,7 +11130,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -12077,7 +11137,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -12085,7 +11144,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -12093,7 +11151,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_LOW_MSB _u(18) @@ -12101,7 +11158,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -12109,7 +11165,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -12117,7 +11172,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -12125,7 +11179,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_LOW_MSB _u(14) @@ -12133,7 +11186,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -12141,7 +11193,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -12149,7 +11200,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -12157,7 +11207,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_LOW_MSB _u(10) @@ -12165,7 +11214,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -12173,7 +11221,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -12181,7 +11228,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -12189,7 +11235,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_LOW_MSB _u(6) @@ -12197,7 +11242,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -12205,7 +11249,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -12213,7 +11256,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -12221,7 +11263,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_LOW_MSB _u(2) @@ -12229,7 +11270,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -12237,7 +11277,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTE0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -12251,7 +11290,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -12259,7 +11297,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_LOW_MSB _u(30) @@ -12267,7 +11304,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -12275,7 +11311,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -12283,7 +11318,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -12291,7 +11325,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_LOW_MSB _u(26) @@ -12299,7 +11332,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -12307,7 +11339,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -12315,7 +11346,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -12323,7 +11353,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_LOW_MSB _u(22) @@ -12331,7 +11360,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -12339,7 +11367,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -12347,7 +11374,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -12355,7 +11381,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_LOW_MSB _u(18) @@ -12363,7 +11388,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -12371,7 +11395,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -12379,7 +11402,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -12387,7 +11409,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_LOW_MSB _u(14) @@ -12395,7 +11416,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -12403,7 +11423,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -12411,7 +11430,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -12419,7 +11437,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_LOW_MSB _u(10) @@ -12427,7 +11444,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -12435,7 +11451,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -12443,7 +11458,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -12451,7 +11465,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_LOW_MSB _u(6) @@ -12459,7 +11472,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -12467,7 +11479,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -12475,7 +11486,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -12483,7 +11493,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_LOW_MSB _u(2) @@ -12491,7 +11500,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -12499,7 +11507,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTE1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -12513,7 +11520,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -12521,7 +11527,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_LOW_MSB _u(30) @@ -12529,7 +11534,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -12537,7 +11541,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -12545,7 +11548,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -12553,7 +11555,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_LOW_MSB _u(26) @@ -12561,7 +11562,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -12569,7 +11569,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -12577,7 +11576,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -12585,7 +11583,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_LOW_MSB _u(22) @@ -12593,7 +11590,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -12601,7 +11597,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -12609,7 +11604,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -12617,7 +11611,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_LOW_MSB _u(18) @@ -12625,7 +11618,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -12633,7 +11625,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -12641,7 +11632,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -12649,7 +11639,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_LOW_MSB _u(14) @@ -12657,7 +11646,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -12665,7 +11653,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -12673,7 +11660,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -12681,7 +11667,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_LOW_MSB _u(10) @@ -12689,7 +11674,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -12697,7 +11681,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -12705,7 +11688,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -12713,7 +11695,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_LOW_MSB _u(6) @@ -12721,7 +11702,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -12729,7 +11709,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -12737,7 +11716,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -12745,7 +11723,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_LOW_MSB _u(2) @@ -12753,7 +11730,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -12761,7 +11737,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTE2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -12775,7 +11750,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -12783,7 +11757,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_LOW_MSB _u(22) @@ -12791,7 +11764,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -12799,7 +11771,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -12807,7 +11778,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -12815,7 +11785,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_LOW_MSB _u(18) @@ -12823,7 +11792,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -12831,7 +11799,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -12839,7 +11806,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -12847,7 +11813,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_LOW_MSB _u(14) @@ -12855,7 +11820,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -12863,7 +11827,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -12871,7 +11834,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -12879,7 +11841,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_LOW_MSB _u(10) @@ -12887,7 +11848,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -12895,7 +11855,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -12903,7 +11862,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -12911,7 +11869,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_LOW_MSB _u(6) @@ -12919,7 +11876,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -12927,7 +11883,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -12935,7 +11890,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -12943,7 +11897,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_LOW_MSB _u(2) @@ -12951,7 +11904,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -12959,7 +11911,6 @@ #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTE3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -12973,7 +11924,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -12981,7 +11931,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_LOW_MSB _u(30) @@ -12989,7 +11938,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -12997,7 +11945,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -13005,7 +11952,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO7_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -13013,7 +11959,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_LOW_MSB _u(26) @@ -13021,7 +11966,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -13029,7 +11973,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -13037,7 +11980,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO6_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -13045,7 +11987,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_LOW_MSB _u(22) @@ -13053,7 +11994,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -13061,7 +12001,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -13069,7 +12008,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO5_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -13077,7 +12015,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_LOW_MSB _u(18) @@ -13085,7 +12022,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -13093,7 +12029,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -13101,7 +12036,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO4_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -13109,7 +12043,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_LOW_MSB _u(14) @@ -13117,7 +12050,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -13125,7 +12057,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -13133,7 +12064,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -13141,7 +12071,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_LOW_MSB _u(10) @@ -13149,7 +12078,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -13157,7 +12085,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -13165,7 +12092,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -13173,7 +12099,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_LOW_MSB _u(6) @@ -13181,7 +12106,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -13189,7 +12113,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -13197,7 +12120,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -13205,7 +12127,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_LOW_MSB _u(2) @@ -13213,7 +12134,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -13221,7 +12141,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTF0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -13235,7 +12154,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -13243,7 +12161,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_LOW_MSB _u(30) @@ -13251,7 +12168,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -13259,7 +12175,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -13267,7 +12182,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO15_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -13275,7 +12189,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_LOW_MSB _u(26) @@ -13283,7 +12196,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -13291,7 +12203,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -13299,7 +12210,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO14_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -13307,7 +12217,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_LOW_MSB _u(22) @@ -13315,7 +12224,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -13323,7 +12231,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -13331,7 +12238,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO13_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -13339,7 +12245,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_LOW_MSB _u(18) @@ -13347,7 +12252,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -13355,7 +12259,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -13363,7 +12266,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO12_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -13371,7 +12273,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_LOW_MSB _u(14) @@ -13379,7 +12280,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -13387,7 +12287,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -13395,7 +12294,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO11_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -13403,7 +12301,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_LOW_MSB _u(10) @@ -13411,7 +12308,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -13419,7 +12315,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -13427,7 +12322,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO10_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -13435,7 +12329,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_LOW_MSB _u(6) @@ -13443,7 +12336,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -13451,7 +12343,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -13459,7 +12350,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO9_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -13467,7 +12357,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_LOW_MSB _u(2) @@ -13475,7 +12364,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -13483,7 +12371,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTF1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -13497,7 +12384,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -13505,7 +12391,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_LOW_MSB _u(30) @@ -13513,7 +12398,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -13521,7 +12405,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -13529,7 +12412,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO23_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -13537,7 +12419,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_LOW_MSB _u(26) @@ -13545,7 +12426,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -13553,7 +12433,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -13561,7 +12440,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO22_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -13569,7 +12447,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_LOW_MSB _u(22) @@ -13577,7 +12454,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -13585,7 +12461,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -13593,7 +12468,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO21_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -13601,7 +12475,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_LOW_MSB _u(18) @@ -13609,7 +12482,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -13617,7 +12489,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -13625,7 +12496,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO20_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -13633,7 +12503,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_LOW_MSB _u(14) @@ -13641,7 +12510,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -13649,7 +12517,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -13657,7 +12524,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO19_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -13665,7 +12531,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_LOW_MSB _u(10) @@ -13673,7 +12538,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -13681,7 +12545,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -13689,7 +12552,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO18_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -13697,7 +12559,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_LOW_MSB _u(6) @@ -13705,7 +12566,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -13713,7 +12573,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -13721,7 +12580,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO17_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -13729,7 +12587,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_LOW_MSB _u(2) @@ -13737,7 +12594,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -13745,7 +12601,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTF2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -13759,7 +12614,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -13767,7 +12621,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_LOW_MSB _u(22) @@ -13775,7 +12628,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -13783,7 +12635,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -13791,7 +12642,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO29_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -13799,7 +12649,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_LOW_MSB _u(18) @@ -13807,7 +12656,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -13815,7 +12663,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -13823,7 +12670,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO28_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -13831,7 +12677,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_LOW_MSB _u(14) @@ -13839,7 +12684,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -13847,7 +12691,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -13855,7 +12698,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO27_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -13863,7 +12705,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_LOW_MSB _u(10) @@ -13871,7 +12712,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -13879,7 +12719,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -13887,7 +12726,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO26_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -13895,7 +12733,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_LOW_MSB _u(6) @@ -13903,7 +12740,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -13911,7 +12747,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -13919,7 +12754,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO25_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -13927,7 +12761,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_LOW_MSB _u(2) @@ -13935,7 +12768,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -13943,7 +12775,6 @@ #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTF3_GPIO24_LEVEL_LOW_MSB _u(0) @@ -13957,7 +12788,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_HIGH_MSB _u(31) @@ -13965,7 +12795,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_LOW_MSB _u(30) @@ -13973,7 +12802,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_HIGH_MSB _u(29) @@ -13981,7 +12809,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_LOW_MSB _u(28) @@ -13989,7 +12816,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO7_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_HIGH_MSB _u(27) @@ -13997,7 +12823,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_LOW_MSB _u(26) @@ -14005,7 +12830,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_HIGH_MSB _u(25) @@ -14013,7 +12837,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_LOW_MSB _u(24) @@ -14021,7 +12844,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO6_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_HIGH_MSB _u(23) @@ -14029,7 +12851,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_LOW_MSB _u(22) @@ -14037,7 +12858,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_HIGH_MSB _u(21) @@ -14045,7 +12865,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_LOW_MSB _u(20) @@ -14053,7 +12872,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO5_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_HIGH_MSB _u(19) @@ -14061,7 +12879,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_LOW_MSB _u(18) @@ -14069,7 +12886,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_HIGH_MSB _u(17) @@ -14077,7 +12893,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_LOW_MSB _u(16) @@ -14085,7 +12900,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO4_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_HIGH_MSB _u(15) @@ -14093,7 +12907,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_LOW_MSB _u(14) @@ -14101,7 +12914,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_HIGH_MSB _u(13) @@ -14109,7 +12921,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_LOW_MSB _u(12) @@ -14117,7 +12928,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_HIGH_MSB _u(11) @@ -14125,7 +12935,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_LOW_MSB _u(10) @@ -14133,7 +12942,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_HIGH_MSB _u(9) @@ -14141,7 +12949,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_LOW_MSB _u(8) @@ -14149,7 +12956,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_HIGH_MSB _u(7) @@ -14157,7 +12963,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_LOW_MSB _u(6) @@ -14165,7 +12970,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_HIGH_MSB _u(5) @@ -14173,7 +12977,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_LOW_MSB _u(4) @@ -14181,7 +12984,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_HIGH_MSB _u(3) @@ -14189,7 +12991,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_LOW_MSB _u(2) @@ -14197,7 +12998,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_HIGH_MSB _u(1) @@ -14205,7 +13005,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTS0_GPIO0_LEVEL_LOW_MSB _u(0) @@ -14219,7 +13018,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_HIGH_MSB _u(31) @@ -14227,7 +13025,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_LOW_MSB _u(30) @@ -14235,7 +13032,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_HIGH_MSB _u(29) @@ -14243,7 +13039,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_LOW_MSB _u(28) @@ -14251,7 +13046,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO15_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_HIGH_MSB _u(27) @@ -14259,7 +13053,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_LOW_MSB _u(26) @@ -14267,7 +13060,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_HIGH_MSB _u(25) @@ -14275,7 +13067,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_LOW_MSB _u(24) @@ -14283,7 +13074,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO14_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_HIGH_MSB _u(23) @@ -14291,7 +13081,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_LOW_MSB _u(22) @@ -14299,7 +13088,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_HIGH_MSB _u(21) @@ -14307,7 +13095,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_LOW_MSB _u(20) @@ -14315,7 +13102,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO13_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_HIGH_MSB _u(19) @@ -14323,7 +13109,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_LOW_MSB _u(18) @@ -14331,7 +13116,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_HIGH_MSB _u(17) @@ -14339,7 +13123,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_LOW_MSB _u(16) @@ -14347,7 +13130,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO12_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_HIGH_MSB _u(15) @@ -14355,7 +13137,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_LOW_MSB _u(14) @@ -14363,7 +13144,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_HIGH_MSB _u(13) @@ -14371,7 +13151,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_LOW_MSB _u(12) @@ -14379,7 +13158,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO11_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_HIGH_MSB _u(11) @@ -14387,7 +13165,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_LOW_MSB _u(10) @@ -14395,7 +13172,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_HIGH_MSB _u(9) @@ -14403,7 +13179,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_LOW_MSB _u(8) @@ -14411,7 +13186,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO10_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_HIGH_MSB _u(7) @@ -14419,7 +13193,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_LOW_MSB _u(6) @@ -14427,7 +13200,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_HIGH_MSB _u(5) @@ -14435,7 +13207,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_LOW_MSB _u(4) @@ -14443,7 +13214,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO9_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_HIGH_MSB _u(3) @@ -14451,7 +13221,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_LOW_MSB _u(2) @@ -14459,7 +13228,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_HIGH_MSB _u(1) @@ -14467,7 +13235,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTS1_GPIO8_LEVEL_LOW_MSB _u(0) @@ -14481,7 +13248,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_HIGH_BITS _u(0x80000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_HIGH_MSB _u(31) @@ -14489,7 +13255,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_LOW_BITS _u(0x40000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_LOW_MSB _u(30) @@ -14497,7 +13262,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_HIGH_BITS _u(0x20000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_HIGH_MSB _u(29) @@ -14505,7 +13269,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_LOW_BITS _u(0x10000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_LOW_MSB _u(28) @@ -14513,7 +13276,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO23_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_HIGH_BITS _u(0x08000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_HIGH_MSB _u(27) @@ -14521,7 +13283,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_LOW_BITS _u(0x04000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_LOW_MSB _u(26) @@ -14529,7 +13290,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_HIGH_BITS _u(0x02000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_HIGH_MSB _u(25) @@ -14537,7 +13297,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_LOW_BITS _u(0x01000000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_LOW_MSB _u(24) @@ -14545,7 +13304,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO22_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_HIGH_MSB _u(23) @@ -14553,7 +13311,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_LOW_MSB _u(22) @@ -14561,7 +13318,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_HIGH_MSB _u(21) @@ -14569,7 +13325,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_LOW_MSB _u(20) @@ -14577,7 +13332,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO21_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_HIGH_MSB _u(19) @@ -14585,7 +13339,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_LOW_MSB _u(18) @@ -14593,7 +13346,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_HIGH_MSB _u(17) @@ -14601,7 +13353,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_LOW_MSB _u(16) @@ -14609,7 +13360,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO20_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_HIGH_MSB _u(15) @@ -14617,7 +13367,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_LOW_MSB _u(14) @@ -14625,7 +13374,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_HIGH_MSB _u(13) @@ -14633,7 +13381,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_LOW_MSB _u(12) @@ -14641,7 +13388,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO19_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_HIGH_MSB _u(11) @@ -14649,7 +13395,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_LOW_MSB _u(10) @@ -14657,7 +13402,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_HIGH_MSB _u(9) @@ -14665,7 +13409,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_LOW_MSB _u(8) @@ -14673,7 +13416,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO18_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_HIGH_MSB _u(7) @@ -14681,7 +13423,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_LOW_MSB _u(6) @@ -14689,7 +13430,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_HIGH_MSB _u(5) @@ -14697,7 +13437,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_LOW_MSB _u(4) @@ -14705,7 +13444,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO17_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_HIGH_MSB _u(3) @@ -14713,7 +13451,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_LOW_MSB _u(2) @@ -14721,7 +13458,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_HIGH_MSB _u(1) @@ -14729,7 +13465,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTS2_GPIO16_LEVEL_LOW_MSB _u(0) @@ -14743,7 +13478,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_HIGH_BITS _u(0x00800000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_HIGH_MSB _u(23) @@ -14751,7 +13485,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_LOW_BITS _u(0x00400000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_LOW_MSB _u(22) @@ -14759,7 +13492,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_HIGH_BITS _u(0x00200000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_HIGH_MSB _u(21) @@ -14767,7 +13499,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_LOW_BITS _u(0x00100000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_LOW_MSB _u(20) @@ -14775,7 +13506,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO29_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_HIGH_BITS _u(0x00080000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_HIGH_MSB _u(19) @@ -14783,7 +13513,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_LOW_BITS _u(0x00040000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_LOW_MSB _u(18) @@ -14791,7 +13520,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_HIGH_BITS _u(0x00020000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_HIGH_MSB _u(17) @@ -14799,7 +13527,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_LOW_BITS _u(0x00010000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_LOW_MSB _u(16) @@ -14807,7 +13534,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO28_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_HIGH_BITS _u(0x00008000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_HIGH_MSB _u(15) @@ -14815,7 +13541,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_LOW_BITS _u(0x00004000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_LOW_MSB _u(14) @@ -14823,7 +13548,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_HIGH_BITS _u(0x00002000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_HIGH_MSB _u(13) @@ -14831,7 +13555,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_LOW_BITS _u(0x00001000) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_LOW_MSB _u(12) @@ -14839,7 +13562,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO27_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_HIGH_BITS _u(0x00000800) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_HIGH_MSB _u(11) @@ -14847,7 +13569,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_LOW_BITS _u(0x00000400) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_LOW_MSB _u(10) @@ -14855,7 +13576,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_HIGH_BITS _u(0x00000200) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_HIGH_MSB _u(9) @@ -14863,7 +13583,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_LOW_BITS _u(0x00000100) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_LOW_MSB _u(8) @@ -14871,7 +13590,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO26_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_HIGH_BITS _u(0x00000080) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_HIGH_MSB _u(7) @@ -14879,7 +13597,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_LOW_BITS _u(0x00000040) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_LOW_MSB _u(6) @@ -14887,7 +13604,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_HIGH_BITS _u(0x00000020) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_HIGH_MSB _u(5) @@ -14895,7 +13611,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_LOW_BITS _u(0x00000010) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_LOW_MSB _u(4) @@ -14903,7 +13618,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO25_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_HIGH_BITS _u(0x00000008) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_HIGH_MSB _u(3) @@ -14911,7 +13625,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_LOW_BITS _u(0x00000004) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_LOW_MSB _u(2) @@ -14919,7 +13632,6 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_HIGH -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_HIGH_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_HIGH_BITS _u(0x00000002) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_HIGH_MSB _u(1) @@ -14927,11 +13639,11 @@ #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW -// Description : None #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW_RESET _u(0x0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW_BITS _u(0x00000001) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW_MSB _u(0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW_LSB _u(0) #define IO_BANK0_DORMANT_WAKE_INTS3_GPIO24_LEVEL_LOW_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_IO_BANK0_DEFINED +#endif // _HARDWARE_REGS_IO_BANK0_H + diff --git a/lib/rp2040/hardware/regs/io_qspi.h b/lib/pico-sdk/rp2040/hardware/regs/io_qspi.h index 7c381b7a..5ed0ddba 100644 --- a/lib/rp2040/hardware/regs/io_qspi.h +++ b/lib/pico-sdk/rp2040/hardware/regs/io_qspi.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : IO_QSPI // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_IO_QSPI_DEFINED -#define HARDWARE_REGS_IO_QSPI_DEFINED +#ifndef _HARDWARE_REGS_IO_QSPI_H +#define _HARDWARE_REGS_IO_QSPI_H // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SCLK_STATUS // Description : GPIO status @@ -91,67 +92,64 @@ #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -159,14 +157,14 @@ // 0x00 -> xip_sclk // 0x05 -> sio_30 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_XIP_SCLK _u(0x00) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_SIO_30 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_SIO_30 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SCLK_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SS_STATUS // Description : GPIO status @@ -247,67 +245,64 @@ #define IO_QSPI_GPIO_QSPI_SS_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -315,14 +310,14 @@ // 0x00 -> xip_ss_n // 0x05 -> sio_31 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_XIP_SS_N _u(0x00) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_SIO_31 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_SIO_31 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SS_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SD0_STATUS // Description : GPIO status @@ -403,67 +398,64 @@ #define IO_QSPI_GPIO_QSPI_SD0_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -471,14 +463,14 @@ // 0x00 -> xip_sd0 // 0x05 -> sio_32 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_XIP_SD0 _u(0x00) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_SIO_32 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_SIO_32 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SD0_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SD1_STATUS // Description : GPIO status @@ -559,67 +551,64 @@ #define IO_QSPI_GPIO_QSPI_SD1_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -627,14 +616,14 @@ // 0x00 -> xip_sd1 // 0x05 -> sio_33 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_XIP_SD1 _u(0x00) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_SIO_33 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_SIO_33 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SD1_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SD2_STATUS // Description : GPIO status @@ -715,67 +704,64 @@ #define IO_QSPI_GPIO_QSPI_SD2_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -783,14 +769,14 @@ // 0x00 -> xip_sd2 // 0x05 -> sio_34 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_XIP_SD2 _u(0x00) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_SIO_34 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_SIO_34 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SD2_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_GPIO_QSPI_SD3_STATUS // Description : GPIO status @@ -871,67 +857,64 @@ #define IO_QSPI_GPIO_QSPI_SD3_CTRL_RESET _u(0x0000001f) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER -// Description : 0x0 -> don't invert the interrupt +// 0x0 -> don't invert the interrupt // 0x1 -> invert the interrupt // 0x2 -> drive interrupt low // 0x3 -> drive interrupt high -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_BITS _u(0x30000000) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_MSB _u(29) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_LSB _u(28) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_BITS _u(0x30000000) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_MSB _u(29) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_LSB _u(28) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_IRQOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER -// Description : 0x0 -> don't invert the peri input +// 0x0 -> don't invert the peri input // 0x1 -> invert the peri input // 0x2 -> drive peri input low // 0x3 -> drive peri input high -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_BITS _u(0x00030000) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_MSB _u(17) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_LSB _u(16) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_BITS _u(0x00030000) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_MSB _u(17) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_LSB _u(16) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_INOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER -// Description : 0x0 -> drive output enable from peripheral signal selected by -// funcsel -// 0x1 -> drive output enable from inverse of peripheral signal -// selected by funcsel +// 0x0 -> drive output enable from peripheral signal selected by funcsel +// 0x1 -> drive output enable from inverse of peripheral signal selected by funcsel // 0x2 -> disable output // 0x3 -> enable output -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_BITS _u(0x00003000) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_MSB _u(13) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_LSB _u(12) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_ACCESS "RW" -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_NORMAL _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_INVERT _u(0x1) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_BITS _u(0x00003000) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_MSB _u(13) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_LSB _u(12) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_NORMAL _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_INVERT _u(0x1) #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_DISABLE _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_ENABLE _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OEOVER_VALUE_ENABLE _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER -// Description : 0x0 -> drive output from peripheral signal selected by funcsel -// 0x1 -> drive output from inverse of peripheral signal selected -// by funcsel +// 0x0 -> drive output from peripheral signal selected by funcsel +// 0x1 -> drive output from inverse of peripheral signal selected by funcsel // 0x2 -> drive output low // 0x3 -> drive output high -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_RESET _u(0x0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_BITS _u(0x00000300) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_MSB _u(9) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_LSB _u(8) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_RESET _u(0x0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_BITS _u(0x00000300) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_MSB _u(9) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_LSB _u(8) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_NORMAL _u(0x0) #define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_INVERT _u(0x1) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_LOW _u(0x2) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_HIGH _u(0x3) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_LOW _u(0x2) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_OUTOVER_VALUE_HIGH _u(0x3) // ----------------------------------------------------------------------------- // Field : IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL // Description : 0-31 -> selects pin function according to the gpio table @@ -939,14 +922,14 @@ // 0x00 -> xip_sd3 // 0x05 -> sio_35 // 0x1f -> null -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_RESET _u(0x1f) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_BITS _u(0x0000001f) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_MSB _u(4) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_LSB _u(0) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_ACCESS "RW" +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_RESET _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_BITS _u(0x0000001f) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_MSB _u(4) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_LSB _u(0) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_ACCESS "RW" #define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_XIP_SD3 _u(0x00) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_SIO_35 _u(0x05) -#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_SIO_35 _u(0x05) +#define IO_QSPI_GPIO_QSPI_SD3_CTRL_FUNCSEL_VALUE_NULL _u(0x1f) // ============================================================================= // Register : IO_QSPI_INTR // Description : Raw Interrupts @@ -955,7 +938,6 @@ #define IO_QSPI_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -963,7 +945,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -971,7 +952,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -979,7 +959,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -987,7 +966,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -995,7 +973,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1003,7 +980,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -1011,7 +987,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -1019,7 +994,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -1027,7 +1001,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -1035,7 +1008,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -1043,7 +1015,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -1051,7 +1022,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -1059,7 +1029,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -1067,7 +1036,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -1075,7 +1043,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -1083,7 +1050,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -1091,7 +1057,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -1099,7 +1064,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SS_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -1107,7 +1071,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -1115,7 +1078,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -1123,7 +1085,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -1131,7 +1092,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -1139,7 +1099,6 @@ #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_INTR_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -1153,7 +1112,6 @@ #define IO_QSPI_PROC0_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -1161,7 +1119,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -1169,7 +1126,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -1177,7 +1133,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -1185,7 +1140,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -1193,7 +1147,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1201,7 +1154,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -1209,7 +1161,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -1217,7 +1168,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -1225,7 +1175,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -1233,7 +1182,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -1241,7 +1189,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -1249,7 +1196,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -1257,7 +1203,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -1265,7 +1210,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -1273,7 +1217,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -1281,7 +1224,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -1289,7 +1231,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -1297,7 +1238,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -1305,7 +1245,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -1313,7 +1252,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -1321,7 +1259,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -1329,7 +1266,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -1337,7 +1273,6 @@ #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC0_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -1351,7 +1286,6 @@ #define IO_QSPI_PROC0_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -1359,7 +1293,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -1367,7 +1300,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -1375,7 +1307,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -1383,7 +1314,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -1391,7 +1321,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1399,7 +1328,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -1407,7 +1335,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -1415,7 +1342,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -1423,7 +1349,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -1431,7 +1356,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -1439,7 +1363,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -1447,7 +1370,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -1455,7 +1377,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -1463,7 +1384,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -1471,7 +1391,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -1479,7 +1398,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -1487,7 +1405,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -1495,7 +1412,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -1503,7 +1419,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -1511,7 +1426,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -1519,7 +1433,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -1527,7 +1440,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -1535,7 +1447,6 @@ #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC0_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -1549,7 +1460,6 @@ #define IO_QSPI_PROC0_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -1557,7 +1467,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -1565,7 +1474,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -1573,7 +1481,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -1581,7 +1488,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -1589,7 +1495,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1597,7 +1502,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -1605,7 +1509,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -1613,7 +1516,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -1621,7 +1523,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -1629,7 +1530,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -1637,7 +1537,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -1645,7 +1544,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -1653,7 +1551,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -1661,7 +1558,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -1669,7 +1565,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -1677,7 +1572,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -1685,7 +1579,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -1693,7 +1586,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -1701,7 +1593,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -1709,7 +1600,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -1717,7 +1607,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -1725,7 +1614,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -1733,7 +1621,6 @@ #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC0_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -1747,7 +1634,6 @@ #define IO_QSPI_PROC1_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -1755,7 +1641,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -1763,7 +1648,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -1771,7 +1655,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -1779,7 +1662,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -1787,7 +1669,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1795,7 +1676,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -1803,7 +1683,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -1811,7 +1690,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -1819,7 +1697,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -1827,7 +1704,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -1835,7 +1711,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -1843,7 +1718,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -1851,7 +1725,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -1859,7 +1732,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -1867,7 +1739,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -1875,7 +1746,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -1883,7 +1753,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -1891,7 +1760,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -1899,7 +1767,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -1907,7 +1774,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -1915,7 +1781,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -1923,7 +1788,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -1931,7 +1795,6 @@ #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC1_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -1945,7 +1808,6 @@ #define IO_QSPI_PROC1_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -1953,7 +1815,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -1961,7 +1822,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -1969,7 +1829,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -1977,7 +1836,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -1985,7 +1843,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -1993,7 +1850,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -2001,7 +1857,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -2009,7 +1864,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -2017,7 +1871,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -2025,7 +1878,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -2033,7 +1885,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -2041,7 +1892,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -2049,7 +1899,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -2057,7 +1906,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -2065,7 +1913,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -2073,7 +1920,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -2081,7 +1927,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -2089,7 +1934,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -2097,7 +1941,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -2105,7 +1948,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -2113,7 +1955,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -2121,7 +1962,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -2129,7 +1969,6 @@ #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC1_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -2143,7 +1982,6 @@ #define IO_QSPI_PROC1_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -2151,7 +1989,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -2159,7 +1996,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -2167,7 +2003,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -2175,7 +2010,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -2183,7 +2017,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -2191,7 +2024,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -2199,7 +2031,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -2207,7 +2038,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -2215,7 +2045,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -2223,7 +2052,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -2231,7 +2059,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -2239,7 +2066,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -2247,7 +2073,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -2255,7 +2080,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -2263,7 +2087,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -2271,7 +2094,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -2279,7 +2101,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -2287,7 +2108,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -2295,7 +2115,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -2303,7 +2122,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -2311,7 +2129,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -2319,7 +2136,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -2327,7 +2143,6 @@ #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_PROC1_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -2341,7 +2156,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -2349,7 +2163,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -2357,7 +2170,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -2365,7 +2177,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -2373,7 +2184,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -2381,7 +2191,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -2389,7 +2198,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -2397,7 +2205,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -2405,7 +2212,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -2413,7 +2219,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -2421,7 +2226,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -2429,7 +2233,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -2437,7 +2240,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -2445,7 +2247,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -2453,7 +2254,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -2461,7 +2261,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -2469,7 +2268,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -2477,7 +2275,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -2485,7 +2282,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -2493,7 +2289,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -2501,7 +2296,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -2509,7 +2303,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -2517,7 +2310,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -2525,7 +2317,6 @@ #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_DORMANT_WAKE_INTE_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -2539,7 +2330,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -2547,7 +2337,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -2555,7 +2344,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -2563,7 +2351,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -2571,7 +2358,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -2579,7 +2365,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -2587,7 +2372,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -2595,7 +2379,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -2603,7 +2386,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -2611,7 +2393,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -2619,7 +2400,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -2627,7 +2407,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -2635,7 +2414,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -2643,7 +2421,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -2651,7 +2428,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -2659,7 +2435,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -2667,7 +2442,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -2675,7 +2449,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -2683,7 +2456,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -2691,7 +2463,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -2699,7 +2470,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -2707,7 +2477,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -2715,7 +2484,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -2723,7 +2491,6 @@ #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_DORMANT_WAKE_INTF_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) @@ -2737,7 +2504,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_HIGH_BITS _u(0x00800000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_HIGH_MSB _u(23) @@ -2745,7 +2511,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_LOW_BITS _u(0x00400000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_LOW_MSB _u(22) @@ -2753,7 +2518,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_BITS _u(0x00200000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_MSB _u(21) @@ -2761,7 +2525,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_LOW_BITS _u(0x00100000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_LOW_MSB _u(20) @@ -2769,7 +2532,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD3_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_HIGH_BITS _u(0x00080000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_HIGH_MSB _u(19) @@ -2777,7 +2539,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_LOW_BITS _u(0x00040000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_LOW_MSB _u(18) @@ -2785,7 +2546,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_BITS _u(0x00020000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_MSB _u(17) @@ -2793,7 +2553,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_LOW_BITS _u(0x00010000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_LOW_MSB _u(16) @@ -2801,7 +2560,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD2_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_HIGH_BITS _u(0x00008000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_HIGH_MSB _u(15) @@ -2809,7 +2567,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_LOW_BITS _u(0x00004000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_LOW_MSB _u(14) @@ -2817,7 +2574,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_BITS _u(0x00002000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_MSB _u(13) @@ -2825,7 +2581,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_LOW_BITS _u(0x00001000) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_LOW_MSB _u(12) @@ -2833,7 +2588,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD1_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_HIGH_BITS _u(0x00000800) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_HIGH_MSB _u(11) @@ -2841,7 +2595,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_LOW_BITS _u(0x00000400) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_LOW_MSB _u(10) @@ -2849,7 +2602,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_BITS _u(0x00000200) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_MSB _u(9) @@ -2857,7 +2609,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_LOW_BITS _u(0x00000100) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_LOW_MSB _u(8) @@ -2865,7 +2616,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SD0_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_HIGH_BITS _u(0x00000080) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_HIGH_MSB _u(7) @@ -2873,7 +2623,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_LOW_BITS _u(0x00000040) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_LOW_MSB _u(6) @@ -2881,7 +2630,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_HIGH_BITS _u(0x00000020) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_HIGH_MSB _u(5) @@ -2889,7 +2637,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_LOW_BITS _u(0x00000010) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_LOW_MSB _u(4) @@ -2897,7 +2644,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SS_LEVEL_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_BITS _u(0x00000008) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_MSB _u(3) @@ -2905,7 +2651,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_LOW_BITS _u(0x00000004) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_LOW_MSB _u(2) @@ -2913,7 +2658,6 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_EDGE_LOW_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_BITS _u(0x00000002) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_MSB _u(1) @@ -2921,11 +2665,11 @@ #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_HIGH_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW -// Description : None #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_RESET _u(0x0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_BITS _u(0x00000001) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_MSB _u(0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_LSB _u(0) #define IO_QSPI_DORMANT_WAKE_INTS_GPIO_QSPI_SCLK_LEVEL_LOW_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_IO_QSPI_DEFINED +#endif // _HARDWARE_REGS_IO_QSPI_H + diff --git a/lib/rp2040/hardware/regs/m0plus.h b/lib/pico-sdk/rp2040/hardware/regs/m0plus.h index cef5ab0a..028e5ad8 100644 --- a/lib/rp2040/hardware/regs/m0plus.h +++ b/lib/pico-sdk/rp2040/hardware/regs/m0plus.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : M0PLUS // Version : 1 // Bus type : ahbl -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_M0PLUS_DEFINED -#define HARDWARE_REGS_M0PLUS_DEFINED +#ifndef _HARDWARE_REGS_M0PLUS_H +#define _HARDWARE_REGS_M0PLUS_H // ============================================================================= // Register : M0PLUS_SYST_CSR // Description : Use the SysTick Control and Status Register to enable the @@ -610,11 +611,11 @@ #define M0PLUS_CPUID_REVISION_ACCESS "RO" // ============================================================================= // Register : M0PLUS_ICSR -// Description : Use the Interrupt Control State Register to set a pending -// Non-Maskable Interrupt (NMI), set or clear a pending PendSV, -// set or clear a pending SysTick, check for pending exceptions, -// check the vector number of the highest priority pended -// exception, check the vector number of the active exception. +// Description : Use the Interrupt Control State Register to set a pending Non- +// Maskable Interrupt (NMI), set or clear a pending PendSV, set or +// clear a pending SysTick, check for pending exceptions, check +// the vector number of the highest priority pended exception, +// check the vector number of the active exception. #define M0PLUS_ICSR_OFFSET _u(0x0000ed04) #define M0PLUS_ICSR_BITS _u(0x9edff1ff) #define M0PLUS_ICSR_RESET _u(0x00000000) @@ -1146,4 +1147,5 @@ #define M0PLUS_MPU_RASR_ENABLE_LSB _u(0) #define M0PLUS_MPU_RASR_ENABLE_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_M0PLUS_DEFINED +#endif // _HARDWARE_REGS_M0PLUS_H + diff --git a/lib/rp2040/hardware/regs/pads_bank0.h b/lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h index 06102ac9..04c5e397 100644 --- a/lib/rp2040/hardware/regs/pads_bank0.h +++ b/lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,21 +9,20 @@ // Register block : PADS_BANK0 // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_PADS_BANK0_DEFINED -#define HARDWARE_REGS_PADS_BANK0_DEFINED +#ifndef _HARDWARE_REGS_PADS_BANK0_H +#define _HARDWARE_REGS_PADS_BANK0_H // ============================================================================= // Register : PADS_BANK0_VOLTAGE_SELECT // Description : Voltage select. Per bank control // 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) // 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) -#define PADS_BANK0_VOLTAGE_SELECT_OFFSET _u(0x00000000) -#define PADS_BANK0_VOLTAGE_SELECT_BITS _u(0x00000001) -#define PADS_BANK0_VOLTAGE_SELECT_RESET _u(0x00000000) -#define PADS_BANK0_VOLTAGE_SELECT_MSB _u(0) -#define PADS_BANK0_VOLTAGE_SELECT_LSB _u(0) -#define PADS_BANK0_VOLTAGE_SELECT_ACCESS "RW" +#define PADS_BANK0_VOLTAGE_SELECT_OFFSET _u(0x00000000) +#define PADS_BANK0_VOLTAGE_SELECT_BITS _u(0x00000001) +#define PADS_BANK0_VOLTAGE_SELECT_RESET _u(0x00000000) +#define PADS_BANK0_VOLTAGE_SELECT_MSB _u(0) +#define PADS_BANK0_VOLTAGE_SELECT_LSB _u(0) +#define PADS_BANK0_VOLTAGE_SELECT_ACCESS "RW" #define PADS_BANK0_VOLTAGE_SELECT_VALUE_3V3 _u(0x0) #define PADS_BANK0_VOLTAGE_SELECT_VALUE_1V8 _u(0x1) // ============================================================================= @@ -54,14 +55,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO0_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO0_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO0_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO0_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO0_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO0_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO0_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO0_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO0_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO0_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO0_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO0_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO0_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO0_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO0_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO0_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO0_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO0_PUE @@ -125,14 +126,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO1_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO1_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO1_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO1_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO1_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO1_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO1_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO1_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO1_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO1_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO1_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO1_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO1_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO1_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO1_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO1_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO1_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO1_PUE @@ -196,14 +197,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO2_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO2_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO2_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO2_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO2_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO2_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO2_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO2_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO2_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO2_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO2_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO2_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO2_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO2_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO2_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO2_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO2_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO2_PUE @@ -267,14 +268,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO3_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO3_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO3_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO3_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO3_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO3_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO3_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO3_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO3_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO3_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO3_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO3_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO3_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO3_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO3_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO3_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO3_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO3_PUE @@ -338,14 +339,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO4_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO4_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO4_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO4_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO4_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO4_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO4_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO4_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO4_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO4_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO4_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO4_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO4_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO4_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO4_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO4_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO4_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO4_PUE @@ -409,14 +410,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO5_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO5_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO5_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO5_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO5_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO5_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO5_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO5_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO5_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO5_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO5_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO5_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO5_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO5_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO5_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO5_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO5_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO5_PUE @@ -480,14 +481,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO6_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO6_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO6_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO6_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO6_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO6_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO6_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO6_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO6_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO6_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO6_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO6_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO6_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO6_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO6_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO6_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO6_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO6_PUE @@ -551,14 +552,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO7_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO7_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO7_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO7_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO7_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO7_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO7_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO7_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO7_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO7_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO7_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO7_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO7_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO7_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO7_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO7_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO7_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO7_PUE @@ -622,14 +623,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO8_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO8_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO8_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO8_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO8_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO8_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO8_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO8_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO8_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO8_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO8_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO8_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO8_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO8_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO8_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO8_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO8_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO8_PUE @@ -693,14 +694,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO9_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO9_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO9_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO9_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO9_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO9_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO9_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO9_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO9_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO9_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO9_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO9_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO9_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO9_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO9_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO9_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO9_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO9_PUE @@ -764,14 +765,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO10_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO10_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO10_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO10_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO10_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO10_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO10_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO10_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO10_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO10_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO10_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO10_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO10_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO10_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO10_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO10_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO10_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO10_PUE @@ -835,14 +836,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO11_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO11_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO11_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO11_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO11_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO11_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO11_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO11_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO11_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO11_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO11_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO11_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO11_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO11_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO11_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO11_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO11_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO11_PUE @@ -906,14 +907,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO12_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO12_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO12_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO12_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO12_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO12_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO12_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO12_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO12_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO12_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO12_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO12_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO12_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO12_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO12_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO12_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO12_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO12_PUE @@ -977,14 +978,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO13_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO13_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO13_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO13_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO13_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO13_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO13_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO13_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO13_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO13_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO13_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO13_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO13_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO13_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO13_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO13_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO13_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO13_PUE @@ -1048,14 +1049,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO14_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO14_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO14_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO14_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO14_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO14_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO14_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO14_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO14_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO14_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO14_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO14_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO14_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO14_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO14_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO14_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO14_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO14_PUE @@ -1119,14 +1120,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO15_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO15_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO15_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO15_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO15_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO15_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO15_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO15_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO15_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO15_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO15_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO15_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO15_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO15_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO15_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO15_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO15_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO15_PUE @@ -1190,14 +1191,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO16_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO16_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO16_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO16_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO16_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO16_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO16_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO16_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO16_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO16_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO16_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO16_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO16_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO16_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO16_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO16_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO16_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO16_PUE @@ -1261,14 +1262,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO17_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO17_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO17_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO17_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO17_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO17_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO17_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO17_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO17_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO17_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO17_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO17_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO17_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO17_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO17_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO17_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO17_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO17_PUE @@ -1332,14 +1333,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO18_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO18_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO18_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO18_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO18_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO18_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO18_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO18_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO18_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO18_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO18_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO18_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO18_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO18_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO18_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO18_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO18_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO18_PUE @@ -1403,14 +1404,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO19_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO19_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO19_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO19_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO19_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO19_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO19_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO19_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO19_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO19_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO19_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO19_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO19_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO19_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO19_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO19_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO19_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO19_PUE @@ -1474,14 +1475,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO20_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO20_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO20_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO20_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO20_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO20_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO20_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO20_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO20_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO20_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO20_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO20_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO20_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO20_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO20_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO20_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO20_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO20_PUE @@ -1545,14 +1546,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO21_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO21_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO21_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO21_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO21_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO21_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO21_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO21_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO21_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO21_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO21_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO21_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO21_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO21_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO21_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO21_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO21_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO21_PUE @@ -1616,14 +1617,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO22_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO22_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO22_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO22_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO22_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO22_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO22_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO22_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO22_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO22_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO22_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO22_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO22_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO22_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO22_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO22_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO22_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO22_PUE @@ -1687,14 +1688,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO23_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO23_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO23_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO23_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO23_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO23_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO23_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO23_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO23_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO23_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO23_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO23_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO23_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO23_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO23_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO23_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO23_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO23_PUE @@ -1758,14 +1759,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO24_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO24_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO24_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO24_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO24_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO24_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO24_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO24_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO24_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO24_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO24_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO24_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO24_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO24_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO24_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO24_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO24_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO24_PUE @@ -1829,14 +1830,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO25_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO25_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO25_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO25_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO25_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO25_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO25_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO25_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO25_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO25_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO25_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO25_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO25_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO25_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO25_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO25_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO25_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO25_PUE @@ -1900,14 +1901,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO26_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO26_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO26_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO26_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO26_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO26_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO26_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO26_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO26_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO26_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO26_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO26_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO26_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO26_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO26_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO26_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO26_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO26_PUE @@ -1971,14 +1972,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO27_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO27_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO27_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO27_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO27_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO27_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO27_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO27_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO27_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO27_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO27_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO27_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO27_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO27_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO27_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO27_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO27_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO27_PUE @@ -2042,14 +2043,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO28_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO28_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO28_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO28_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO28_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO28_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO28_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO28_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO28_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO28_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO28_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO28_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO28_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO28_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO28_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO28_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO28_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO28_PUE @@ -2113,14 +2114,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_GPIO29_DRIVE_RESET _u(0x1) -#define PADS_BANK0_GPIO29_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_GPIO29_DRIVE_MSB _u(5) -#define PADS_BANK0_GPIO29_DRIVE_LSB _u(4) -#define PADS_BANK0_GPIO29_DRIVE_ACCESS "RW" -#define PADS_BANK0_GPIO29_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_GPIO29_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_GPIO29_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO29_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO29_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO29_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO29_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO29_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO29_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO29_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO29_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_GPIO29_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_GPIO29_PUE @@ -2184,14 +2185,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_SWCLK_DRIVE_RESET _u(0x1) -#define PADS_BANK0_SWCLK_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_SWCLK_DRIVE_MSB _u(5) -#define PADS_BANK0_SWCLK_DRIVE_LSB _u(4) -#define PADS_BANK0_SWCLK_DRIVE_ACCESS "RW" -#define PADS_BANK0_SWCLK_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_SWCLK_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_SWCLK_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_SWCLK_DRIVE_RESET _u(0x1) +#define PADS_BANK0_SWCLK_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_SWCLK_DRIVE_MSB _u(5) +#define PADS_BANK0_SWCLK_DRIVE_LSB _u(4) +#define PADS_BANK0_SWCLK_DRIVE_ACCESS "RW" +#define PADS_BANK0_SWCLK_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_SWCLK_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_SWCLK_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_SWCLK_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_SWCLK_PUE @@ -2255,14 +2256,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_BANK0_SWD_DRIVE_RESET _u(0x1) -#define PADS_BANK0_SWD_DRIVE_BITS _u(0x00000030) -#define PADS_BANK0_SWD_DRIVE_MSB _u(5) -#define PADS_BANK0_SWD_DRIVE_LSB _u(4) -#define PADS_BANK0_SWD_DRIVE_ACCESS "RW" -#define PADS_BANK0_SWD_DRIVE_VALUE_2MA _u(0x0) -#define PADS_BANK0_SWD_DRIVE_VALUE_4MA _u(0x1) -#define PADS_BANK0_SWD_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_SWD_DRIVE_RESET _u(0x1) +#define PADS_BANK0_SWD_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_SWD_DRIVE_MSB _u(5) +#define PADS_BANK0_SWD_DRIVE_LSB _u(4) +#define PADS_BANK0_SWD_DRIVE_ACCESS "RW" +#define PADS_BANK0_SWD_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_SWD_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_SWD_DRIVE_VALUE_8MA _u(0x2) #define PADS_BANK0_SWD_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_BANK0_SWD_PUE @@ -2297,4 +2298,5 @@ #define PADS_BANK0_SWD_SLEWFAST_LSB _u(0) #define PADS_BANK0_SWD_SLEWFAST_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_PADS_BANK0_DEFINED +#endif // _HARDWARE_REGS_PADS_BANK0_H + diff --git a/lib/rp2040/hardware/regs/pads_qspi.h b/lib/pico-sdk/rp2040/hardware/regs/pads_qspi.h index b3a09e90..4cd27ea7 100644 --- a/lib/rp2040/hardware/regs/pads_qspi.h +++ b/lib/pico-sdk/rp2040/hardware/regs/pads_qspi.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,21 +9,20 @@ // Register block : PADS_QSPI // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_PADS_QSPI_DEFINED -#define HARDWARE_REGS_PADS_QSPI_DEFINED +#ifndef _HARDWARE_REGS_PADS_QSPI_H +#define _HARDWARE_REGS_PADS_QSPI_H // ============================================================================= // Register : PADS_QSPI_VOLTAGE_SELECT // Description : Voltage select. Per bank control // 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) // 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) -#define PADS_QSPI_VOLTAGE_SELECT_OFFSET _u(0x00000000) -#define PADS_QSPI_VOLTAGE_SELECT_BITS _u(0x00000001) -#define PADS_QSPI_VOLTAGE_SELECT_RESET _u(0x00000000) -#define PADS_QSPI_VOLTAGE_SELECT_MSB _u(0) -#define PADS_QSPI_VOLTAGE_SELECT_LSB _u(0) -#define PADS_QSPI_VOLTAGE_SELECT_ACCESS "RW" +#define PADS_QSPI_VOLTAGE_SELECT_OFFSET _u(0x00000000) +#define PADS_QSPI_VOLTAGE_SELECT_BITS _u(0x00000001) +#define PADS_QSPI_VOLTAGE_SELECT_RESET _u(0x00000000) +#define PADS_QSPI_VOLTAGE_SELECT_MSB _u(0) +#define PADS_QSPI_VOLTAGE_SELECT_LSB _u(0) +#define PADS_QSPI_VOLTAGE_SELECT_ACCESS "RW" #define PADS_QSPI_VOLTAGE_SELECT_VALUE_3V3 _u(0x0) #define PADS_QSPI_VOLTAGE_SELECT_VALUE_1V8 _u(0x1) // ============================================================================= @@ -54,14 +55,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SCLK_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SCLK_PUE @@ -125,14 +126,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SD0_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SD0_PUE @@ -196,14 +197,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SD1_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SD1_PUE @@ -267,14 +268,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SD2_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SD2_PUE @@ -338,14 +339,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SD3_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SD3_PUE @@ -409,14 +410,14 @@ // 0x1 -> 4mA // 0x2 -> 8mA // 0x3 -> 12mA -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_RESET _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_BITS _u(0x00000030) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_MSB _u(5) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_LSB _u(4) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_ACCESS "RW" -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_2MA _u(0x0) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_4MA _u(0x1) -#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_8MA _u(0x2) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_RESET _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_BITS _u(0x00000030) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_MSB _u(5) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_LSB _u(4) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_ACCESS "RW" +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_2MA _u(0x0) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_4MA _u(0x1) +#define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_8MA _u(0x2) #define PADS_QSPI_GPIO_QSPI_SS_DRIVE_VALUE_12MA _u(0x3) // ----------------------------------------------------------------------------- // Field : PADS_QSPI_GPIO_QSPI_SS_PUE @@ -451,4 +452,5 @@ #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_LSB _u(0) #define PADS_QSPI_GPIO_QSPI_SS_SLEWFAST_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_PADS_QSPI_DEFINED +#endif // _HARDWARE_REGS_PADS_QSPI_H + diff --git a/lib/rp2040/hardware/regs/pio.h b/lib/pico-sdk/rp2040/hardware/regs/pio.h index 8b4829fb..d10de90f 100644 --- a/lib/rp2040/hardware/regs/pio.h +++ b/lib/pico-sdk/rp2040/hardware/regs/pio.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : ahbl // Description : Programmable IO block // ============================================================================= -#ifndef HARDWARE_REGS_PIO_DEFINED -#define HARDWARE_REGS_PIO_DEFINED +#ifndef _HARDWARE_REGS_PIO_H +#define _HARDWARE_REGS_PIO_H // ============================================================================= // Register : PIO_CTRL // Description : PIO control register @@ -52,6 +54,9 @@ // counter; the waiting-on-IRQ state; any stalled instruction // written to SMx_INSTR or run by OUT/MOV EXEC; any pin write left // asserted due to OUT_STICKY. +// +// The program counter, the contents of the output shift register +// and the X/Y scratch registers are not affected. #define PIO_CTRL_SM_RESTART_RESET _u(0x0) #define PIO_CTRL_SM_RESTART_BITS _u(0x000000f0) #define PIO_CTRL_SM_RESTART_MSB _u(7) @@ -166,7 +171,6 @@ #define PIO_FLEVEL_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_RX3 -// Description : None #define PIO_FLEVEL_RX3_RESET _u(0x0) #define PIO_FLEVEL_RX3_BITS _u(0xf0000000) #define PIO_FLEVEL_RX3_MSB _u(31) @@ -174,7 +178,6 @@ #define PIO_FLEVEL_RX3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_TX3 -// Description : None #define PIO_FLEVEL_TX3_RESET _u(0x0) #define PIO_FLEVEL_TX3_BITS _u(0x0f000000) #define PIO_FLEVEL_TX3_MSB _u(27) @@ -182,7 +185,6 @@ #define PIO_FLEVEL_TX3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_RX2 -// Description : None #define PIO_FLEVEL_RX2_RESET _u(0x0) #define PIO_FLEVEL_RX2_BITS _u(0x00f00000) #define PIO_FLEVEL_RX2_MSB _u(23) @@ -190,7 +192,6 @@ #define PIO_FLEVEL_RX2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_TX2 -// Description : None #define PIO_FLEVEL_TX2_RESET _u(0x0) #define PIO_FLEVEL_TX2_BITS _u(0x000f0000) #define PIO_FLEVEL_TX2_MSB _u(19) @@ -198,7 +199,6 @@ #define PIO_FLEVEL_TX2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_RX1 -// Description : None #define PIO_FLEVEL_RX1_RESET _u(0x0) #define PIO_FLEVEL_RX1_BITS _u(0x0000f000) #define PIO_FLEVEL_RX1_MSB _u(15) @@ -206,7 +206,6 @@ #define PIO_FLEVEL_RX1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_TX1 -// Description : None #define PIO_FLEVEL_TX1_RESET _u(0x0) #define PIO_FLEVEL_TX1_BITS _u(0x00000f00) #define PIO_FLEVEL_TX1_MSB _u(11) @@ -214,7 +213,6 @@ #define PIO_FLEVEL_TX1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_RX0 -// Description : None #define PIO_FLEVEL_RX0_RESET _u(0x0) #define PIO_FLEVEL_RX0_BITS _u(0x000000f0) #define PIO_FLEVEL_RX0_MSB _u(7) @@ -222,7 +220,6 @@ #define PIO_FLEVEL_RX0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_FLEVEL_TX0 -// Description : None #define PIO_FLEVEL_TX0_RESET _u(0x0) #define PIO_FLEVEL_TX0_BITS _u(0x0000000f) #define PIO_FLEVEL_TX0_MSB _u(3) @@ -378,7 +375,8 @@ // ============================================================================= // Register : PIO_DBG_PADOUT // Description : Read to sample the pad output values PIO is currently driving -// to the GPIOs. +// to the GPIOs. On RP2040 there are 30 GPIOs, so the two most +// significant bits are hardwired to 0. #define PIO_DBG_PADOUT_OFFSET _u(0x0000003c) #define PIO_DBG_PADOUT_BITS _u(0xffffffff) #define PIO_DBG_PADOUT_RESET _u(0x00000000) @@ -388,7 +386,8 @@ // ============================================================================= // Register : PIO_DBG_PADOE // Description : Read to sample the pad output enables (direction) PIO is -// currently driving to the GPIOs. +// currently driving to the GPIOs. On RP2040 there are 30 GPIOs, +// so the two most significant bits are hardwired to 0. #define PIO_DBG_PADOE_OFFSET _u(0x00000040) #define PIO_DBG_PADOE_BITS _u(0xffffffff) #define PIO_DBG_PADOE_RESET _u(0x00000000) @@ -846,11 +845,11 @@ // Description : Comparison used for the MOV x, STATUS instruction. // 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes // 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes -#define PIO_SM0_EXECCTRL_STATUS_SEL_RESET _u(0x0) -#define PIO_SM0_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) -#define PIO_SM0_EXECCTRL_STATUS_SEL_MSB _u(4) -#define PIO_SM0_EXECCTRL_STATUS_SEL_LSB _u(4) -#define PIO_SM0_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM0_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM0_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM0_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM0_EXECCTRL_STATUS_SEL_ACCESS "RW" #define PIO_SM0_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) #define PIO_SM0_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) // ----------------------------------------------------------------------------- @@ -1021,10 +1020,10 @@ // Description : The lowest-numbered pin that will be affected by a side-set // operation. The MSBs of an instruction's side-set/delay field // (up to 5, determined by SIDESET_COUNT) are used for side-set -// data, with the remaining LSBs used for delay. The -// least-significant bit of the side-set portion is the bit -// written to this pin, with more-significant bits written to -// higher-numbered pins. +// data, with the remaining LSBs used for delay. The least- +// significant bit of the side-set portion is the bit written to +// this pin, with more-significant bits written to higher-numbered +// pins. #define PIO_SM0_PINCTRL_SIDESET_BASE_RESET _u(0x00) #define PIO_SM0_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) #define PIO_SM0_PINCTRL_SIDESET_BASE_MSB _u(14) @@ -1177,11 +1176,11 @@ // Description : Comparison used for the MOV x, STATUS instruction. // 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes // 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes -#define PIO_SM1_EXECCTRL_STATUS_SEL_RESET _u(0x0) -#define PIO_SM1_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) -#define PIO_SM1_EXECCTRL_STATUS_SEL_MSB _u(4) -#define PIO_SM1_EXECCTRL_STATUS_SEL_LSB _u(4) -#define PIO_SM1_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM1_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM1_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM1_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM1_EXECCTRL_STATUS_SEL_ACCESS "RW" #define PIO_SM1_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) #define PIO_SM1_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) // ----------------------------------------------------------------------------- @@ -1352,10 +1351,10 @@ // Description : The lowest-numbered pin that will be affected by a side-set // operation. The MSBs of an instruction's side-set/delay field // (up to 5, determined by SIDESET_COUNT) are used for side-set -// data, with the remaining LSBs used for delay. The -// least-significant bit of the side-set portion is the bit -// written to this pin, with more-significant bits written to -// higher-numbered pins. +// data, with the remaining LSBs used for delay. The least- +// significant bit of the side-set portion is the bit written to +// this pin, with more-significant bits written to higher-numbered +// pins. #define PIO_SM1_PINCTRL_SIDESET_BASE_RESET _u(0x00) #define PIO_SM1_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) #define PIO_SM1_PINCTRL_SIDESET_BASE_MSB _u(14) @@ -1508,11 +1507,11 @@ // Description : Comparison used for the MOV x, STATUS instruction. // 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes // 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes -#define PIO_SM2_EXECCTRL_STATUS_SEL_RESET _u(0x0) -#define PIO_SM2_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) -#define PIO_SM2_EXECCTRL_STATUS_SEL_MSB _u(4) -#define PIO_SM2_EXECCTRL_STATUS_SEL_LSB _u(4) -#define PIO_SM2_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM2_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM2_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM2_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM2_EXECCTRL_STATUS_SEL_ACCESS "RW" #define PIO_SM2_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) #define PIO_SM2_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) // ----------------------------------------------------------------------------- @@ -1683,10 +1682,10 @@ // Description : The lowest-numbered pin that will be affected by a side-set // operation. The MSBs of an instruction's side-set/delay field // (up to 5, determined by SIDESET_COUNT) are used for side-set -// data, with the remaining LSBs used for delay. The -// least-significant bit of the side-set portion is the bit -// written to this pin, with more-significant bits written to -// higher-numbered pins. +// data, with the remaining LSBs used for delay. The least- +// significant bit of the side-set portion is the bit written to +// this pin, with more-significant bits written to higher-numbered +// pins. #define PIO_SM2_PINCTRL_SIDESET_BASE_RESET _u(0x00) #define PIO_SM2_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) #define PIO_SM2_PINCTRL_SIDESET_BASE_MSB _u(14) @@ -1839,11 +1838,11 @@ // Description : Comparison used for the MOV x, STATUS instruction. // 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes // 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes -#define PIO_SM3_EXECCTRL_STATUS_SEL_RESET _u(0x0) -#define PIO_SM3_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) -#define PIO_SM3_EXECCTRL_STATUS_SEL_MSB _u(4) -#define PIO_SM3_EXECCTRL_STATUS_SEL_LSB _u(4) -#define PIO_SM3_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM3_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM3_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM3_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM3_EXECCTRL_STATUS_SEL_ACCESS "RW" #define PIO_SM3_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) #define PIO_SM3_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) // ----------------------------------------------------------------------------- @@ -2014,10 +2013,10 @@ // Description : The lowest-numbered pin that will be affected by a side-set // operation. The MSBs of an instruction's side-set/delay field // (up to 5, determined by SIDESET_COUNT) are used for side-set -// data, with the remaining LSBs used for delay. The -// least-significant bit of the side-set portion is the bit -// written to this pin, with more-significant bits written to -// higher-numbered pins. +// data, with the remaining LSBs used for delay. The least- +// significant bit of the side-set portion is the bit written to +// this pin, with more-significant bits written to higher-numbered +// pins. #define PIO_SM3_PINCTRL_SIDESET_BASE_RESET _u(0x00) #define PIO_SM3_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) #define PIO_SM3_PINCTRL_SIDESET_BASE_MSB _u(14) @@ -2052,7 +2051,6 @@ #define PIO_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM3 -// Description : None #define PIO_INTR_SM3_RESET _u(0x0) #define PIO_INTR_SM3_BITS _u(0x00000800) #define PIO_INTR_SM3_MSB _u(11) @@ -2060,7 +2058,6 @@ #define PIO_INTR_SM3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM2 -// Description : None #define PIO_INTR_SM2_RESET _u(0x0) #define PIO_INTR_SM2_BITS _u(0x00000400) #define PIO_INTR_SM2_MSB _u(10) @@ -2068,7 +2065,6 @@ #define PIO_INTR_SM2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM1 -// Description : None #define PIO_INTR_SM1_RESET _u(0x0) #define PIO_INTR_SM1_BITS _u(0x00000200) #define PIO_INTR_SM1_MSB _u(9) @@ -2076,7 +2072,6 @@ #define PIO_INTR_SM1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM0 -// Description : None #define PIO_INTR_SM0_RESET _u(0x0) #define PIO_INTR_SM0_BITS _u(0x00000100) #define PIO_INTR_SM0_MSB _u(8) @@ -2084,7 +2079,6 @@ #define PIO_INTR_SM0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM3_TXNFULL -// Description : None #define PIO_INTR_SM3_TXNFULL_RESET _u(0x0) #define PIO_INTR_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_INTR_SM3_TXNFULL_MSB _u(7) @@ -2092,7 +2086,6 @@ #define PIO_INTR_SM3_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM2_TXNFULL -// Description : None #define PIO_INTR_SM2_TXNFULL_RESET _u(0x0) #define PIO_INTR_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_INTR_SM2_TXNFULL_MSB _u(6) @@ -2100,7 +2093,6 @@ #define PIO_INTR_SM2_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM1_TXNFULL -// Description : None #define PIO_INTR_SM1_TXNFULL_RESET _u(0x0) #define PIO_INTR_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_INTR_SM1_TXNFULL_MSB _u(5) @@ -2108,7 +2100,6 @@ #define PIO_INTR_SM1_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM0_TXNFULL -// Description : None #define PIO_INTR_SM0_TXNFULL_RESET _u(0x0) #define PIO_INTR_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_INTR_SM0_TXNFULL_MSB _u(4) @@ -2116,7 +2107,6 @@ #define PIO_INTR_SM0_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM3_RXNEMPTY -// Description : None #define PIO_INTR_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_INTR_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_INTR_SM3_RXNEMPTY_MSB _u(3) @@ -2124,7 +2114,6 @@ #define PIO_INTR_SM3_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM2_RXNEMPTY -// Description : None #define PIO_INTR_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_INTR_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_INTR_SM2_RXNEMPTY_MSB _u(2) @@ -2132,7 +2121,6 @@ #define PIO_INTR_SM2_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM1_RXNEMPTY -// Description : None #define PIO_INTR_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_INTR_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_INTR_SM1_RXNEMPTY_MSB _u(1) @@ -2140,7 +2128,6 @@ #define PIO_INTR_SM1_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_INTR_SM0_RXNEMPTY -// Description : None #define PIO_INTR_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_INTR_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_INTR_SM0_RXNEMPTY_MSB _u(0) @@ -2154,7 +2141,6 @@ #define PIO_IRQ0_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM3 -// Description : None #define PIO_IRQ0_INTE_SM3_RESET _u(0x0) #define PIO_IRQ0_INTE_SM3_BITS _u(0x00000800) #define PIO_IRQ0_INTE_SM3_MSB _u(11) @@ -2162,7 +2148,6 @@ #define PIO_IRQ0_INTE_SM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM2 -// Description : None #define PIO_IRQ0_INTE_SM2_RESET _u(0x0) #define PIO_IRQ0_INTE_SM2_BITS _u(0x00000400) #define PIO_IRQ0_INTE_SM2_MSB _u(10) @@ -2170,7 +2155,6 @@ #define PIO_IRQ0_INTE_SM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM1 -// Description : None #define PIO_IRQ0_INTE_SM1_RESET _u(0x0) #define PIO_IRQ0_INTE_SM1_BITS _u(0x00000200) #define PIO_IRQ0_INTE_SM1_MSB _u(9) @@ -2178,7 +2162,6 @@ #define PIO_IRQ0_INTE_SM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM0 -// Description : None #define PIO_IRQ0_INTE_SM0_RESET _u(0x0) #define PIO_IRQ0_INTE_SM0_BITS _u(0x00000100) #define PIO_IRQ0_INTE_SM0_MSB _u(8) @@ -2186,7 +2169,6 @@ #define PIO_IRQ0_INTE_SM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM3_TXNFULL -// Description : None #define PIO_IRQ0_INTE_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTE_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ0_INTE_SM3_TXNFULL_MSB _u(7) @@ -2194,7 +2176,6 @@ #define PIO_IRQ0_INTE_SM3_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM2_TXNFULL -// Description : None #define PIO_IRQ0_INTE_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTE_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ0_INTE_SM2_TXNFULL_MSB _u(6) @@ -2202,7 +2183,6 @@ #define PIO_IRQ0_INTE_SM2_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM1_TXNFULL -// Description : None #define PIO_IRQ0_INTE_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTE_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ0_INTE_SM1_TXNFULL_MSB _u(5) @@ -2210,7 +2190,6 @@ #define PIO_IRQ0_INTE_SM1_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM0_TXNFULL -// Description : None #define PIO_IRQ0_INTE_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTE_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ0_INTE_SM0_TXNFULL_MSB _u(4) @@ -2218,7 +2197,6 @@ #define PIO_IRQ0_INTE_SM0_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM3_RXNEMPTY -// Description : None #define PIO_IRQ0_INTE_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTE_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ0_INTE_SM3_RXNEMPTY_MSB _u(3) @@ -2226,7 +2204,6 @@ #define PIO_IRQ0_INTE_SM3_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM2_RXNEMPTY -// Description : None #define PIO_IRQ0_INTE_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTE_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ0_INTE_SM2_RXNEMPTY_MSB _u(2) @@ -2234,7 +2211,6 @@ #define PIO_IRQ0_INTE_SM2_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM1_RXNEMPTY -// Description : None #define PIO_IRQ0_INTE_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTE_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ0_INTE_SM1_RXNEMPTY_MSB _u(1) @@ -2242,7 +2218,6 @@ #define PIO_IRQ0_INTE_SM1_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTE_SM0_RXNEMPTY -// Description : None #define PIO_IRQ0_INTE_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTE_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ0_INTE_SM0_RXNEMPTY_MSB _u(0) @@ -2256,7 +2231,6 @@ #define PIO_IRQ0_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM3 -// Description : None #define PIO_IRQ0_INTF_SM3_RESET _u(0x0) #define PIO_IRQ0_INTF_SM3_BITS _u(0x00000800) #define PIO_IRQ0_INTF_SM3_MSB _u(11) @@ -2264,7 +2238,6 @@ #define PIO_IRQ0_INTF_SM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM2 -// Description : None #define PIO_IRQ0_INTF_SM2_RESET _u(0x0) #define PIO_IRQ0_INTF_SM2_BITS _u(0x00000400) #define PIO_IRQ0_INTF_SM2_MSB _u(10) @@ -2272,7 +2245,6 @@ #define PIO_IRQ0_INTF_SM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM1 -// Description : None #define PIO_IRQ0_INTF_SM1_RESET _u(0x0) #define PIO_IRQ0_INTF_SM1_BITS _u(0x00000200) #define PIO_IRQ0_INTF_SM1_MSB _u(9) @@ -2280,7 +2252,6 @@ #define PIO_IRQ0_INTF_SM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM0 -// Description : None #define PIO_IRQ0_INTF_SM0_RESET _u(0x0) #define PIO_IRQ0_INTF_SM0_BITS _u(0x00000100) #define PIO_IRQ0_INTF_SM0_MSB _u(8) @@ -2288,7 +2259,6 @@ #define PIO_IRQ0_INTF_SM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM3_TXNFULL -// Description : None #define PIO_IRQ0_INTF_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTF_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ0_INTF_SM3_TXNFULL_MSB _u(7) @@ -2296,7 +2266,6 @@ #define PIO_IRQ0_INTF_SM3_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM2_TXNFULL -// Description : None #define PIO_IRQ0_INTF_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTF_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ0_INTF_SM2_TXNFULL_MSB _u(6) @@ -2304,7 +2273,6 @@ #define PIO_IRQ0_INTF_SM2_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM1_TXNFULL -// Description : None #define PIO_IRQ0_INTF_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTF_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ0_INTF_SM1_TXNFULL_MSB _u(5) @@ -2312,7 +2280,6 @@ #define PIO_IRQ0_INTF_SM1_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM0_TXNFULL -// Description : None #define PIO_IRQ0_INTF_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTF_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ0_INTF_SM0_TXNFULL_MSB _u(4) @@ -2320,7 +2287,6 @@ #define PIO_IRQ0_INTF_SM0_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM3_RXNEMPTY -// Description : None #define PIO_IRQ0_INTF_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTF_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ0_INTF_SM3_RXNEMPTY_MSB _u(3) @@ -2328,7 +2294,6 @@ #define PIO_IRQ0_INTF_SM3_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM2_RXNEMPTY -// Description : None #define PIO_IRQ0_INTF_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTF_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ0_INTF_SM2_RXNEMPTY_MSB _u(2) @@ -2336,7 +2301,6 @@ #define PIO_IRQ0_INTF_SM2_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM1_RXNEMPTY -// Description : None #define PIO_IRQ0_INTF_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTF_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ0_INTF_SM1_RXNEMPTY_MSB _u(1) @@ -2344,7 +2308,6 @@ #define PIO_IRQ0_INTF_SM1_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTF_SM0_RXNEMPTY -// Description : None #define PIO_IRQ0_INTF_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTF_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ0_INTF_SM0_RXNEMPTY_MSB _u(0) @@ -2358,7 +2321,6 @@ #define PIO_IRQ0_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM3 -// Description : None #define PIO_IRQ0_INTS_SM3_RESET _u(0x0) #define PIO_IRQ0_INTS_SM3_BITS _u(0x00000800) #define PIO_IRQ0_INTS_SM3_MSB _u(11) @@ -2366,7 +2328,6 @@ #define PIO_IRQ0_INTS_SM3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM2 -// Description : None #define PIO_IRQ0_INTS_SM2_RESET _u(0x0) #define PIO_IRQ0_INTS_SM2_BITS _u(0x00000400) #define PIO_IRQ0_INTS_SM2_MSB _u(10) @@ -2374,7 +2335,6 @@ #define PIO_IRQ0_INTS_SM2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM1 -// Description : None #define PIO_IRQ0_INTS_SM1_RESET _u(0x0) #define PIO_IRQ0_INTS_SM1_BITS _u(0x00000200) #define PIO_IRQ0_INTS_SM1_MSB _u(9) @@ -2382,7 +2342,6 @@ #define PIO_IRQ0_INTS_SM1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM0 -// Description : None #define PIO_IRQ0_INTS_SM0_RESET _u(0x0) #define PIO_IRQ0_INTS_SM0_BITS _u(0x00000100) #define PIO_IRQ0_INTS_SM0_MSB _u(8) @@ -2390,7 +2349,6 @@ #define PIO_IRQ0_INTS_SM0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM3_TXNFULL -// Description : None #define PIO_IRQ0_INTS_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTS_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ0_INTS_SM3_TXNFULL_MSB _u(7) @@ -2398,7 +2356,6 @@ #define PIO_IRQ0_INTS_SM3_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM2_TXNFULL -// Description : None #define PIO_IRQ0_INTS_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTS_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ0_INTS_SM2_TXNFULL_MSB _u(6) @@ -2406,7 +2363,6 @@ #define PIO_IRQ0_INTS_SM2_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM1_TXNFULL -// Description : None #define PIO_IRQ0_INTS_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTS_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ0_INTS_SM1_TXNFULL_MSB _u(5) @@ -2414,7 +2370,6 @@ #define PIO_IRQ0_INTS_SM1_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM0_TXNFULL -// Description : None #define PIO_IRQ0_INTS_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ0_INTS_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ0_INTS_SM0_TXNFULL_MSB _u(4) @@ -2422,7 +2377,6 @@ #define PIO_IRQ0_INTS_SM0_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM3_RXNEMPTY -// Description : None #define PIO_IRQ0_INTS_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTS_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ0_INTS_SM3_RXNEMPTY_MSB _u(3) @@ -2430,7 +2384,6 @@ #define PIO_IRQ0_INTS_SM3_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM2_RXNEMPTY -// Description : None #define PIO_IRQ0_INTS_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTS_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ0_INTS_SM2_RXNEMPTY_MSB _u(2) @@ -2438,7 +2391,6 @@ #define PIO_IRQ0_INTS_SM2_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM1_RXNEMPTY -// Description : None #define PIO_IRQ0_INTS_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTS_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ0_INTS_SM1_RXNEMPTY_MSB _u(1) @@ -2446,7 +2398,6 @@ #define PIO_IRQ0_INTS_SM1_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ0_INTS_SM0_RXNEMPTY -// Description : None #define PIO_IRQ0_INTS_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ0_INTS_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ0_INTS_SM0_RXNEMPTY_MSB _u(0) @@ -2460,7 +2411,6 @@ #define PIO_IRQ1_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM3 -// Description : None #define PIO_IRQ1_INTE_SM3_RESET _u(0x0) #define PIO_IRQ1_INTE_SM3_BITS _u(0x00000800) #define PIO_IRQ1_INTE_SM3_MSB _u(11) @@ -2468,7 +2418,6 @@ #define PIO_IRQ1_INTE_SM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM2 -// Description : None #define PIO_IRQ1_INTE_SM2_RESET _u(0x0) #define PIO_IRQ1_INTE_SM2_BITS _u(0x00000400) #define PIO_IRQ1_INTE_SM2_MSB _u(10) @@ -2476,7 +2425,6 @@ #define PIO_IRQ1_INTE_SM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM1 -// Description : None #define PIO_IRQ1_INTE_SM1_RESET _u(0x0) #define PIO_IRQ1_INTE_SM1_BITS _u(0x00000200) #define PIO_IRQ1_INTE_SM1_MSB _u(9) @@ -2484,7 +2432,6 @@ #define PIO_IRQ1_INTE_SM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM0 -// Description : None #define PIO_IRQ1_INTE_SM0_RESET _u(0x0) #define PIO_IRQ1_INTE_SM0_BITS _u(0x00000100) #define PIO_IRQ1_INTE_SM0_MSB _u(8) @@ -2492,7 +2439,6 @@ #define PIO_IRQ1_INTE_SM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM3_TXNFULL -// Description : None #define PIO_IRQ1_INTE_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTE_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ1_INTE_SM3_TXNFULL_MSB _u(7) @@ -2500,7 +2446,6 @@ #define PIO_IRQ1_INTE_SM3_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM2_TXNFULL -// Description : None #define PIO_IRQ1_INTE_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTE_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ1_INTE_SM2_TXNFULL_MSB _u(6) @@ -2508,7 +2453,6 @@ #define PIO_IRQ1_INTE_SM2_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM1_TXNFULL -// Description : None #define PIO_IRQ1_INTE_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTE_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ1_INTE_SM1_TXNFULL_MSB _u(5) @@ -2516,7 +2460,6 @@ #define PIO_IRQ1_INTE_SM1_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM0_TXNFULL -// Description : None #define PIO_IRQ1_INTE_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTE_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ1_INTE_SM0_TXNFULL_MSB _u(4) @@ -2524,7 +2467,6 @@ #define PIO_IRQ1_INTE_SM0_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM3_RXNEMPTY -// Description : None #define PIO_IRQ1_INTE_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTE_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ1_INTE_SM3_RXNEMPTY_MSB _u(3) @@ -2532,7 +2474,6 @@ #define PIO_IRQ1_INTE_SM3_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM2_RXNEMPTY -// Description : None #define PIO_IRQ1_INTE_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTE_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ1_INTE_SM2_RXNEMPTY_MSB _u(2) @@ -2540,7 +2481,6 @@ #define PIO_IRQ1_INTE_SM2_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM1_RXNEMPTY -// Description : None #define PIO_IRQ1_INTE_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTE_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ1_INTE_SM1_RXNEMPTY_MSB _u(1) @@ -2548,7 +2488,6 @@ #define PIO_IRQ1_INTE_SM1_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTE_SM0_RXNEMPTY -// Description : None #define PIO_IRQ1_INTE_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTE_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ1_INTE_SM0_RXNEMPTY_MSB _u(0) @@ -2562,7 +2501,6 @@ #define PIO_IRQ1_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM3 -// Description : None #define PIO_IRQ1_INTF_SM3_RESET _u(0x0) #define PIO_IRQ1_INTF_SM3_BITS _u(0x00000800) #define PIO_IRQ1_INTF_SM3_MSB _u(11) @@ -2570,7 +2508,6 @@ #define PIO_IRQ1_INTF_SM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM2 -// Description : None #define PIO_IRQ1_INTF_SM2_RESET _u(0x0) #define PIO_IRQ1_INTF_SM2_BITS _u(0x00000400) #define PIO_IRQ1_INTF_SM2_MSB _u(10) @@ -2578,7 +2515,6 @@ #define PIO_IRQ1_INTF_SM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM1 -// Description : None #define PIO_IRQ1_INTF_SM1_RESET _u(0x0) #define PIO_IRQ1_INTF_SM1_BITS _u(0x00000200) #define PIO_IRQ1_INTF_SM1_MSB _u(9) @@ -2586,7 +2522,6 @@ #define PIO_IRQ1_INTF_SM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM0 -// Description : None #define PIO_IRQ1_INTF_SM0_RESET _u(0x0) #define PIO_IRQ1_INTF_SM0_BITS _u(0x00000100) #define PIO_IRQ1_INTF_SM0_MSB _u(8) @@ -2594,7 +2529,6 @@ #define PIO_IRQ1_INTF_SM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM3_TXNFULL -// Description : None #define PIO_IRQ1_INTF_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTF_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ1_INTF_SM3_TXNFULL_MSB _u(7) @@ -2602,7 +2536,6 @@ #define PIO_IRQ1_INTF_SM3_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM2_TXNFULL -// Description : None #define PIO_IRQ1_INTF_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTF_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ1_INTF_SM2_TXNFULL_MSB _u(6) @@ -2610,7 +2543,6 @@ #define PIO_IRQ1_INTF_SM2_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM1_TXNFULL -// Description : None #define PIO_IRQ1_INTF_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTF_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ1_INTF_SM1_TXNFULL_MSB _u(5) @@ -2618,7 +2550,6 @@ #define PIO_IRQ1_INTF_SM1_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM0_TXNFULL -// Description : None #define PIO_IRQ1_INTF_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTF_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ1_INTF_SM0_TXNFULL_MSB _u(4) @@ -2626,7 +2557,6 @@ #define PIO_IRQ1_INTF_SM0_TXNFULL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM3_RXNEMPTY -// Description : None #define PIO_IRQ1_INTF_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTF_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ1_INTF_SM3_RXNEMPTY_MSB _u(3) @@ -2634,7 +2564,6 @@ #define PIO_IRQ1_INTF_SM3_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM2_RXNEMPTY -// Description : None #define PIO_IRQ1_INTF_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTF_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ1_INTF_SM2_RXNEMPTY_MSB _u(2) @@ -2642,7 +2571,6 @@ #define PIO_IRQ1_INTF_SM2_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM1_RXNEMPTY -// Description : None #define PIO_IRQ1_INTF_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTF_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ1_INTF_SM1_RXNEMPTY_MSB _u(1) @@ -2650,7 +2578,6 @@ #define PIO_IRQ1_INTF_SM1_RXNEMPTY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTF_SM0_RXNEMPTY -// Description : None #define PIO_IRQ1_INTF_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTF_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ1_INTF_SM0_RXNEMPTY_MSB _u(0) @@ -2664,7 +2591,6 @@ #define PIO_IRQ1_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM3 -// Description : None #define PIO_IRQ1_INTS_SM3_RESET _u(0x0) #define PIO_IRQ1_INTS_SM3_BITS _u(0x00000800) #define PIO_IRQ1_INTS_SM3_MSB _u(11) @@ -2672,7 +2598,6 @@ #define PIO_IRQ1_INTS_SM3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM2 -// Description : None #define PIO_IRQ1_INTS_SM2_RESET _u(0x0) #define PIO_IRQ1_INTS_SM2_BITS _u(0x00000400) #define PIO_IRQ1_INTS_SM2_MSB _u(10) @@ -2680,7 +2605,6 @@ #define PIO_IRQ1_INTS_SM2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM1 -// Description : None #define PIO_IRQ1_INTS_SM1_RESET _u(0x0) #define PIO_IRQ1_INTS_SM1_BITS _u(0x00000200) #define PIO_IRQ1_INTS_SM1_MSB _u(9) @@ -2688,7 +2612,6 @@ #define PIO_IRQ1_INTS_SM1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM0 -// Description : None #define PIO_IRQ1_INTS_SM0_RESET _u(0x0) #define PIO_IRQ1_INTS_SM0_BITS _u(0x00000100) #define PIO_IRQ1_INTS_SM0_MSB _u(8) @@ -2696,7 +2619,6 @@ #define PIO_IRQ1_INTS_SM0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM3_TXNFULL -// Description : None #define PIO_IRQ1_INTS_SM3_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTS_SM3_TXNFULL_BITS _u(0x00000080) #define PIO_IRQ1_INTS_SM3_TXNFULL_MSB _u(7) @@ -2704,7 +2626,6 @@ #define PIO_IRQ1_INTS_SM3_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM2_TXNFULL -// Description : None #define PIO_IRQ1_INTS_SM2_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTS_SM2_TXNFULL_BITS _u(0x00000040) #define PIO_IRQ1_INTS_SM2_TXNFULL_MSB _u(6) @@ -2712,7 +2633,6 @@ #define PIO_IRQ1_INTS_SM2_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM1_TXNFULL -// Description : None #define PIO_IRQ1_INTS_SM1_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTS_SM1_TXNFULL_BITS _u(0x00000020) #define PIO_IRQ1_INTS_SM1_TXNFULL_MSB _u(5) @@ -2720,7 +2640,6 @@ #define PIO_IRQ1_INTS_SM1_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM0_TXNFULL -// Description : None #define PIO_IRQ1_INTS_SM0_TXNFULL_RESET _u(0x0) #define PIO_IRQ1_INTS_SM0_TXNFULL_BITS _u(0x00000010) #define PIO_IRQ1_INTS_SM0_TXNFULL_MSB _u(4) @@ -2728,7 +2647,6 @@ #define PIO_IRQ1_INTS_SM0_TXNFULL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM3_RXNEMPTY -// Description : None #define PIO_IRQ1_INTS_SM3_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTS_SM3_RXNEMPTY_BITS _u(0x00000008) #define PIO_IRQ1_INTS_SM3_RXNEMPTY_MSB _u(3) @@ -2736,7 +2654,6 @@ #define PIO_IRQ1_INTS_SM3_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM2_RXNEMPTY -// Description : None #define PIO_IRQ1_INTS_SM2_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTS_SM2_RXNEMPTY_BITS _u(0x00000004) #define PIO_IRQ1_INTS_SM2_RXNEMPTY_MSB _u(2) @@ -2744,7 +2661,6 @@ #define PIO_IRQ1_INTS_SM2_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM1_RXNEMPTY -// Description : None #define PIO_IRQ1_INTS_SM1_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTS_SM1_RXNEMPTY_BITS _u(0x00000002) #define PIO_IRQ1_INTS_SM1_RXNEMPTY_MSB _u(1) @@ -2752,11 +2668,11 @@ #define PIO_IRQ1_INTS_SM1_RXNEMPTY_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PIO_IRQ1_INTS_SM0_RXNEMPTY -// Description : None #define PIO_IRQ1_INTS_SM0_RXNEMPTY_RESET _u(0x0) #define PIO_IRQ1_INTS_SM0_RXNEMPTY_BITS _u(0x00000001) #define PIO_IRQ1_INTS_SM0_RXNEMPTY_MSB _u(0) #define PIO_IRQ1_INTS_SM0_RXNEMPTY_LSB _u(0) #define PIO_IRQ1_INTS_SM0_RXNEMPTY_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_PIO_DEFINED +#endif // _HARDWARE_REGS_PIO_H + diff --git a/lib/rp2040/hardware/regs/pll.h b/lib/pico-sdk/rp2040/hardware/regs/pll.h index a0f5ad0e..345982e8 100644 --- a/lib/rp2040/hardware/regs/pll.h +++ b/lib/pico-sdk/rp2040/hardware/regs/pll.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,17 +9,16 @@ // Register block : PLL // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_PLL_DEFINED -#define HARDWARE_REGS_PLL_DEFINED +#ifndef _HARDWARE_REGS_PLL_H +#define _HARDWARE_REGS_PLL_H // ============================================================================= // Register : PLL_CS // Description : Control and Status // GENERAL CONSTRAINTS: // Reference clock frequency min=5MHz, max=800MHz // Feedback divider min=16, max=320 -// VCO frequency min=400MHz, max=1600MHz +// VCO frequency min=750MHz, max=1600MHz #define PLL_CS_OFFSET _u(0x00000000) #define PLL_CS_BITS _u(0x8000013f) #define PLL_CS_RESET _u(0x00000001) @@ -132,4 +133,5 @@ #define PLL_PRIM_POSTDIV2_LSB _u(12) #define PLL_PRIM_POSTDIV2_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_PLL_DEFINED +#endif // _HARDWARE_REGS_PLL_H + diff --git a/lib/rp2040/hardware/regs/psm.h b/lib/pico-sdk/rp2040/hardware/regs/psm.h index 8810ae8b..3433f6dc 100644 --- a/lib/rp2040/hardware/regs/psm.h +++ b/lib/pico-sdk/rp2040/hardware/regs/psm.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : PSM // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_PSM_DEFINED -#define HARDWARE_REGS_PSM_DEFINED +#ifndef _HARDWARE_REGS_PSM_H +#define _HARDWARE_REGS_PSM_H // ============================================================================= // Register : PSM_FRCE_ON // Description : Force block out of reset (i.e. power it on) @@ -19,7 +20,6 @@ #define PSM_FRCE_ON_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_PROC1 -// Description : None #define PSM_FRCE_ON_PROC1_RESET _u(0x0) #define PSM_FRCE_ON_PROC1_BITS _u(0x00010000) #define PSM_FRCE_ON_PROC1_MSB _u(16) @@ -27,7 +27,6 @@ #define PSM_FRCE_ON_PROC1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_PROC0 -// Description : None #define PSM_FRCE_ON_PROC0_RESET _u(0x0) #define PSM_FRCE_ON_PROC0_BITS _u(0x00008000) #define PSM_FRCE_ON_PROC0_MSB _u(15) @@ -35,7 +34,6 @@ #define PSM_FRCE_ON_PROC0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SIO -// Description : None #define PSM_FRCE_ON_SIO_RESET _u(0x0) #define PSM_FRCE_ON_SIO_BITS _u(0x00004000) #define PSM_FRCE_ON_SIO_MSB _u(14) @@ -43,7 +41,6 @@ #define PSM_FRCE_ON_SIO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_VREG_AND_CHIP_RESET -// Description : None #define PSM_FRCE_ON_VREG_AND_CHIP_RESET_RESET _u(0x0) #define PSM_FRCE_ON_VREG_AND_CHIP_RESET_BITS _u(0x00002000) #define PSM_FRCE_ON_VREG_AND_CHIP_RESET_MSB _u(13) @@ -51,7 +48,6 @@ #define PSM_FRCE_ON_VREG_AND_CHIP_RESET_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_XIP -// Description : None #define PSM_FRCE_ON_XIP_RESET _u(0x0) #define PSM_FRCE_ON_XIP_BITS _u(0x00001000) #define PSM_FRCE_ON_XIP_MSB _u(12) @@ -59,7 +55,6 @@ #define PSM_FRCE_ON_XIP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM5 -// Description : None #define PSM_FRCE_ON_SRAM5_RESET _u(0x0) #define PSM_FRCE_ON_SRAM5_BITS _u(0x00000800) #define PSM_FRCE_ON_SRAM5_MSB _u(11) @@ -67,7 +62,6 @@ #define PSM_FRCE_ON_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM4 -// Description : None #define PSM_FRCE_ON_SRAM4_RESET _u(0x0) #define PSM_FRCE_ON_SRAM4_BITS _u(0x00000400) #define PSM_FRCE_ON_SRAM4_MSB _u(10) @@ -75,7 +69,6 @@ #define PSM_FRCE_ON_SRAM4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM3 -// Description : None #define PSM_FRCE_ON_SRAM3_RESET _u(0x0) #define PSM_FRCE_ON_SRAM3_BITS _u(0x00000200) #define PSM_FRCE_ON_SRAM3_MSB _u(9) @@ -83,7 +76,6 @@ #define PSM_FRCE_ON_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM2 -// Description : None #define PSM_FRCE_ON_SRAM2_RESET _u(0x0) #define PSM_FRCE_ON_SRAM2_BITS _u(0x00000100) #define PSM_FRCE_ON_SRAM2_MSB _u(8) @@ -91,7 +83,6 @@ #define PSM_FRCE_ON_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM1 -// Description : None #define PSM_FRCE_ON_SRAM1_RESET _u(0x0) #define PSM_FRCE_ON_SRAM1_BITS _u(0x00000080) #define PSM_FRCE_ON_SRAM1_MSB _u(7) @@ -99,7 +90,6 @@ #define PSM_FRCE_ON_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_SRAM0 -// Description : None #define PSM_FRCE_ON_SRAM0_RESET _u(0x0) #define PSM_FRCE_ON_SRAM0_BITS _u(0x00000040) #define PSM_FRCE_ON_SRAM0_MSB _u(6) @@ -107,7 +97,6 @@ #define PSM_FRCE_ON_SRAM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_ROM -// Description : None #define PSM_FRCE_ON_ROM_RESET _u(0x0) #define PSM_FRCE_ON_ROM_BITS _u(0x00000020) #define PSM_FRCE_ON_ROM_MSB _u(5) @@ -115,7 +104,6 @@ #define PSM_FRCE_ON_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_BUSFABRIC -// Description : None #define PSM_FRCE_ON_BUSFABRIC_RESET _u(0x0) #define PSM_FRCE_ON_BUSFABRIC_BITS _u(0x00000010) #define PSM_FRCE_ON_BUSFABRIC_MSB _u(4) @@ -123,7 +111,6 @@ #define PSM_FRCE_ON_BUSFABRIC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_RESETS -// Description : None #define PSM_FRCE_ON_RESETS_RESET _u(0x0) #define PSM_FRCE_ON_RESETS_BITS _u(0x00000008) #define PSM_FRCE_ON_RESETS_MSB _u(3) @@ -131,7 +118,6 @@ #define PSM_FRCE_ON_RESETS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_CLOCKS -// Description : None #define PSM_FRCE_ON_CLOCKS_RESET _u(0x0) #define PSM_FRCE_ON_CLOCKS_BITS _u(0x00000004) #define PSM_FRCE_ON_CLOCKS_MSB _u(2) @@ -139,7 +125,6 @@ #define PSM_FRCE_ON_CLOCKS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_XOSC -// Description : None #define PSM_FRCE_ON_XOSC_RESET _u(0x0) #define PSM_FRCE_ON_XOSC_BITS _u(0x00000002) #define PSM_FRCE_ON_XOSC_MSB _u(1) @@ -147,7 +132,6 @@ #define PSM_FRCE_ON_XOSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_ON_ROSC -// Description : None #define PSM_FRCE_ON_ROSC_RESET _u(0x0) #define PSM_FRCE_ON_ROSC_BITS _u(0x00000001) #define PSM_FRCE_ON_ROSC_MSB _u(0) @@ -161,7 +145,6 @@ #define PSM_FRCE_OFF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_PROC1 -// Description : None #define PSM_FRCE_OFF_PROC1_RESET _u(0x0) #define PSM_FRCE_OFF_PROC1_BITS _u(0x00010000) #define PSM_FRCE_OFF_PROC1_MSB _u(16) @@ -169,7 +152,6 @@ #define PSM_FRCE_OFF_PROC1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_PROC0 -// Description : None #define PSM_FRCE_OFF_PROC0_RESET _u(0x0) #define PSM_FRCE_OFF_PROC0_BITS _u(0x00008000) #define PSM_FRCE_OFF_PROC0_MSB _u(15) @@ -177,7 +159,6 @@ #define PSM_FRCE_OFF_PROC0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SIO -// Description : None #define PSM_FRCE_OFF_SIO_RESET _u(0x0) #define PSM_FRCE_OFF_SIO_BITS _u(0x00004000) #define PSM_FRCE_OFF_SIO_MSB _u(14) @@ -185,7 +166,6 @@ #define PSM_FRCE_OFF_SIO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_VREG_AND_CHIP_RESET -// Description : None #define PSM_FRCE_OFF_VREG_AND_CHIP_RESET_RESET _u(0x0) #define PSM_FRCE_OFF_VREG_AND_CHIP_RESET_BITS _u(0x00002000) #define PSM_FRCE_OFF_VREG_AND_CHIP_RESET_MSB _u(13) @@ -193,7 +173,6 @@ #define PSM_FRCE_OFF_VREG_AND_CHIP_RESET_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_XIP -// Description : None #define PSM_FRCE_OFF_XIP_RESET _u(0x0) #define PSM_FRCE_OFF_XIP_BITS _u(0x00001000) #define PSM_FRCE_OFF_XIP_MSB _u(12) @@ -201,7 +180,6 @@ #define PSM_FRCE_OFF_XIP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM5 -// Description : None #define PSM_FRCE_OFF_SRAM5_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM5_BITS _u(0x00000800) #define PSM_FRCE_OFF_SRAM5_MSB _u(11) @@ -209,7 +187,6 @@ #define PSM_FRCE_OFF_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM4 -// Description : None #define PSM_FRCE_OFF_SRAM4_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM4_BITS _u(0x00000400) #define PSM_FRCE_OFF_SRAM4_MSB _u(10) @@ -217,7 +194,6 @@ #define PSM_FRCE_OFF_SRAM4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM3 -// Description : None #define PSM_FRCE_OFF_SRAM3_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM3_BITS _u(0x00000200) #define PSM_FRCE_OFF_SRAM3_MSB _u(9) @@ -225,7 +201,6 @@ #define PSM_FRCE_OFF_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM2 -// Description : None #define PSM_FRCE_OFF_SRAM2_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM2_BITS _u(0x00000100) #define PSM_FRCE_OFF_SRAM2_MSB _u(8) @@ -233,7 +208,6 @@ #define PSM_FRCE_OFF_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM1 -// Description : None #define PSM_FRCE_OFF_SRAM1_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM1_BITS _u(0x00000080) #define PSM_FRCE_OFF_SRAM1_MSB _u(7) @@ -241,7 +215,6 @@ #define PSM_FRCE_OFF_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_SRAM0 -// Description : None #define PSM_FRCE_OFF_SRAM0_RESET _u(0x0) #define PSM_FRCE_OFF_SRAM0_BITS _u(0x00000040) #define PSM_FRCE_OFF_SRAM0_MSB _u(6) @@ -249,7 +222,6 @@ #define PSM_FRCE_OFF_SRAM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_ROM -// Description : None #define PSM_FRCE_OFF_ROM_RESET _u(0x0) #define PSM_FRCE_OFF_ROM_BITS _u(0x00000020) #define PSM_FRCE_OFF_ROM_MSB _u(5) @@ -257,7 +229,6 @@ #define PSM_FRCE_OFF_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_BUSFABRIC -// Description : None #define PSM_FRCE_OFF_BUSFABRIC_RESET _u(0x0) #define PSM_FRCE_OFF_BUSFABRIC_BITS _u(0x00000010) #define PSM_FRCE_OFF_BUSFABRIC_MSB _u(4) @@ -265,7 +236,6 @@ #define PSM_FRCE_OFF_BUSFABRIC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_RESETS -// Description : None #define PSM_FRCE_OFF_RESETS_RESET _u(0x0) #define PSM_FRCE_OFF_RESETS_BITS _u(0x00000008) #define PSM_FRCE_OFF_RESETS_MSB _u(3) @@ -273,7 +243,6 @@ #define PSM_FRCE_OFF_RESETS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_CLOCKS -// Description : None #define PSM_FRCE_OFF_CLOCKS_RESET _u(0x0) #define PSM_FRCE_OFF_CLOCKS_BITS _u(0x00000004) #define PSM_FRCE_OFF_CLOCKS_MSB _u(2) @@ -281,7 +250,6 @@ #define PSM_FRCE_OFF_CLOCKS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_XOSC -// Description : None #define PSM_FRCE_OFF_XOSC_RESET _u(0x0) #define PSM_FRCE_OFF_XOSC_BITS _u(0x00000002) #define PSM_FRCE_OFF_XOSC_MSB _u(1) @@ -289,7 +257,6 @@ #define PSM_FRCE_OFF_XOSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_FRCE_OFF_ROSC -// Description : None #define PSM_FRCE_OFF_ROSC_RESET _u(0x0) #define PSM_FRCE_OFF_ROSC_BITS _u(0x00000001) #define PSM_FRCE_OFF_ROSC_MSB _u(0) @@ -304,7 +271,6 @@ #define PSM_WDSEL_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_PROC1 -// Description : None #define PSM_WDSEL_PROC1_RESET _u(0x0) #define PSM_WDSEL_PROC1_BITS _u(0x00010000) #define PSM_WDSEL_PROC1_MSB _u(16) @@ -312,7 +278,6 @@ #define PSM_WDSEL_PROC1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_PROC0 -// Description : None #define PSM_WDSEL_PROC0_RESET _u(0x0) #define PSM_WDSEL_PROC0_BITS _u(0x00008000) #define PSM_WDSEL_PROC0_MSB _u(15) @@ -320,7 +285,6 @@ #define PSM_WDSEL_PROC0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SIO -// Description : None #define PSM_WDSEL_SIO_RESET _u(0x0) #define PSM_WDSEL_SIO_BITS _u(0x00004000) #define PSM_WDSEL_SIO_MSB _u(14) @@ -328,7 +292,6 @@ #define PSM_WDSEL_SIO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_VREG_AND_CHIP_RESET -// Description : None #define PSM_WDSEL_VREG_AND_CHIP_RESET_RESET _u(0x0) #define PSM_WDSEL_VREG_AND_CHIP_RESET_BITS _u(0x00002000) #define PSM_WDSEL_VREG_AND_CHIP_RESET_MSB _u(13) @@ -336,7 +299,6 @@ #define PSM_WDSEL_VREG_AND_CHIP_RESET_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_XIP -// Description : None #define PSM_WDSEL_XIP_RESET _u(0x0) #define PSM_WDSEL_XIP_BITS _u(0x00001000) #define PSM_WDSEL_XIP_MSB _u(12) @@ -344,7 +306,6 @@ #define PSM_WDSEL_XIP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM5 -// Description : None #define PSM_WDSEL_SRAM5_RESET _u(0x0) #define PSM_WDSEL_SRAM5_BITS _u(0x00000800) #define PSM_WDSEL_SRAM5_MSB _u(11) @@ -352,7 +313,6 @@ #define PSM_WDSEL_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM4 -// Description : None #define PSM_WDSEL_SRAM4_RESET _u(0x0) #define PSM_WDSEL_SRAM4_BITS _u(0x00000400) #define PSM_WDSEL_SRAM4_MSB _u(10) @@ -360,7 +320,6 @@ #define PSM_WDSEL_SRAM4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM3 -// Description : None #define PSM_WDSEL_SRAM3_RESET _u(0x0) #define PSM_WDSEL_SRAM3_BITS _u(0x00000200) #define PSM_WDSEL_SRAM3_MSB _u(9) @@ -368,7 +327,6 @@ #define PSM_WDSEL_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM2 -// Description : None #define PSM_WDSEL_SRAM2_RESET _u(0x0) #define PSM_WDSEL_SRAM2_BITS _u(0x00000100) #define PSM_WDSEL_SRAM2_MSB _u(8) @@ -376,7 +334,6 @@ #define PSM_WDSEL_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM1 -// Description : None #define PSM_WDSEL_SRAM1_RESET _u(0x0) #define PSM_WDSEL_SRAM1_BITS _u(0x00000080) #define PSM_WDSEL_SRAM1_MSB _u(7) @@ -384,7 +341,6 @@ #define PSM_WDSEL_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_SRAM0 -// Description : None #define PSM_WDSEL_SRAM0_RESET _u(0x0) #define PSM_WDSEL_SRAM0_BITS _u(0x00000040) #define PSM_WDSEL_SRAM0_MSB _u(6) @@ -392,7 +348,6 @@ #define PSM_WDSEL_SRAM0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_ROM -// Description : None #define PSM_WDSEL_ROM_RESET _u(0x0) #define PSM_WDSEL_ROM_BITS _u(0x00000020) #define PSM_WDSEL_ROM_MSB _u(5) @@ -400,7 +355,6 @@ #define PSM_WDSEL_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_BUSFABRIC -// Description : None #define PSM_WDSEL_BUSFABRIC_RESET _u(0x0) #define PSM_WDSEL_BUSFABRIC_BITS _u(0x00000010) #define PSM_WDSEL_BUSFABRIC_MSB _u(4) @@ -408,7 +362,6 @@ #define PSM_WDSEL_BUSFABRIC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_RESETS -// Description : None #define PSM_WDSEL_RESETS_RESET _u(0x0) #define PSM_WDSEL_RESETS_BITS _u(0x00000008) #define PSM_WDSEL_RESETS_MSB _u(3) @@ -416,7 +369,6 @@ #define PSM_WDSEL_RESETS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_CLOCKS -// Description : None #define PSM_WDSEL_CLOCKS_RESET _u(0x0) #define PSM_WDSEL_CLOCKS_BITS _u(0x00000004) #define PSM_WDSEL_CLOCKS_MSB _u(2) @@ -424,7 +376,6 @@ #define PSM_WDSEL_CLOCKS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_XOSC -// Description : None #define PSM_WDSEL_XOSC_RESET _u(0x0) #define PSM_WDSEL_XOSC_BITS _u(0x00000002) #define PSM_WDSEL_XOSC_MSB _u(1) @@ -432,7 +383,6 @@ #define PSM_WDSEL_XOSC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PSM_WDSEL_ROSC -// Description : None #define PSM_WDSEL_ROSC_RESET _u(0x0) #define PSM_WDSEL_ROSC_BITS _u(0x00000001) #define PSM_WDSEL_ROSC_MSB _u(0) @@ -446,7 +396,6 @@ #define PSM_DONE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PSM_DONE_PROC1 -// Description : None #define PSM_DONE_PROC1_RESET _u(0x0) #define PSM_DONE_PROC1_BITS _u(0x00010000) #define PSM_DONE_PROC1_MSB _u(16) @@ -454,7 +403,6 @@ #define PSM_DONE_PROC1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_PROC0 -// Description : None #define PSM_DONE_PROC0_RESET _u(0x0) #define PSM_DONE_PROC0_BITS _u(0x00008000) #define PSM_DONE_PROC0_MSB _u(15) @@ -462,7 +410,6 @@ #define PSM_DONE_PROC0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SIO -// Description : None #define PSM_DONE_SIO_RESET _u(0x0) #define PSM_DONE_SIO_BITS _u(0x00004000) #define PSM_DONE_SIO_MSB _u(14) @@ -470,7 +417,6 @@ #define PSM_DONE_SIO_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_VREG_AND_CHIP_RESET -// Description : None #define PSM_DONE_VREG_AND_CHIP_RESET_RESET _u(0x0) #define PSM_DONE_VREG_AND_CHIP_RESET_BITS _u(0x00002000) #define PSM_DONE_VREG_AND_CHIP_RESET_MSB _u(13) @@ -478,7 +424,6 @@ #define PSM_DONE_VREG_AND_CHIP_RESET_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_XIP -// Description : None #define PSM_DONE_XIP_RESET _u(0x0) #define PSM_DONE_XIP_BITS _u(0x00001000) #define PSM_DONE_XIP_MSB _u(12) @@ -486,7 +431,6 @@ #define PSM_DONE_XIP_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM5 -// Description : None #define PSM_DONE_SRAM5_RESET _u(0x0) #define PSM_DONE_SRAM5_BITS _u(0x00000800) #define PSM_DONE_SRAM5_MSB _u(11) @@ -494,7 +438,6 @@ #define PSM_DONE_SRAM5_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM4 -// Description : None #define PSM_DONE_SRAM4_RESET _u(0x0) #define PSM_DONE_SRAM4_BITS _u(0x00000400) #define PSM_DONE_SRAM4_MSB _u(10) @@ -502,7 +445,6 @@ #define PSM_DONE_SRAM4_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM3 -// Description : None #define PSM_DONE_SRAM3_RESET _u(0x0) #define PSM_DONE_SRAM3_BITS _u(0x00000200) #define PSM_DONE_SRAM3_MSB _u(9) @@ -510,7 +452,6 @@ #define PSM_DONE_SRAM3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM2 -// Description : None #define PSM_DONE_SRAM2_RESET _u(0x0) #define PSM_DONE_SRAM2_BITS _u(0x00000100) #define PSM_DONE_SRAM2_MSB _u(8) @@ -518,7 +459,6 @@ #define PSM_DONE_SRAM2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM1 -// Description : None #define PSM_DONE_SRAM1_RESET _u(0x0) #define PSM_DONE_SRAM1_BITS _u(0x00000080) #define PSM_DONE_SRAM1_MSB _u(7) @@ -526,7 +466,6 @@ #define PSM_DONE_SRAM1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_SRAM0 -// Description : None #define PSM_DONE_SRAM0_RESET _u(0x0) #define PSM_DONE_SRAM0_BITS _u(0x00000040) #define PSM_DONE_SRAM0_MSB _u(6) @@ -534,7 +473,6 @@ #define PSM_DONE_SRAM0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_ROM -// Description : None #define PSM_DONE_ROM_RESET _u(0x0) #define PSM_DONE_ROM_BITS _u(0x00000020) #define PSM_DONE_ROM_MSB _u(5) @@ -542,7 +480,6 @@ #define PSM_DONE_ROM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_BUSFABRIC -// Description : None #define PSM_DONE_BUSFABRIC_RESET _u(0x0) #define PSM_DONE_BUSFABRIC_BITS _u(0x00000010) #define PSM_DONE_BUSFABRIC_MSB _u(4) @@ -550,7 +487,6 @@ #define PSM_DONE_BUSFABRIC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_RESETS -// Description : None #define PSM_DONE_RESETS_RESET _u(0x0) #define PSM_DONE_RESETS_BITS _u(0x00000008) #define PSM_DONE_RESETS_MSB _u(3) @@ -558,7 +494,6 @@ #define PSM_DONE_RESETS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_CLOCKS -// Description : None #define PSM_DONE_CLOCKS_RESET _u(0x0) #define PSM_DONE_CLOCKS_BITS _u(0x00000004) #define PSM_DONE_CLOCKS_MSB _u(2) @@ -566,7 +501,6 @@ #define PSM_DONE_CLOCKS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_XOSC -// Description : None #define PSM_DONE_XOSC_RESET _u(0x0) #define PSM_DONE_XOSC_BITS _u(0x00000002) #define PSM_DONE_XOSC_MSB _u(1) @@ -574,11 +508,11 @@ #define PSM_DONE_XOSC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PSM_DONE_ROSC -// Description : None #define PSM_DONE_ROSC_RESET _u(0x0) #define PSM_DONE_ROSC_BITS _u(0x00000001) #define PSM_DONE_ROSC_MSB _u(0) #define PSM_DONE_ROSC_LSB _u(0) #define PSM_DONE_ROSC_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_PSM_DEFINED +#endif // _HARDWARE_REGS_PSM_H + diff --git a/lib/rp2040/hardware/regs/pwm.h b/lib/pico-sdk/rp2040/hardware/regs/pwm.h index a8535978..29a24f8d 100644 --- a/lib/rp2040/hardware/regs/pwm.h +++ b/lib/pico-sdk/rp2040/hardware/regs/pwm.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : Simple PWM // ============================================================================= -#ifndef HARDWARE_REGS_PWM_DEFINED -#define HARDWARE_REGS_PWM_DEFINED +#ifndef _HARDWARE_REGS_PWM_H +#define _HARDWARE_REGS_PWM_H // ============================================================================= // Register : PWM_CH0_CSR // Description : Control and status register @@ -42,21 +44,19 @@ #define PWM_CH0_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH0_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH0_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH0_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH0_CSR_DIVMODE_MSB _u(5) -#define PWM_CH0_CSR_DIVMODE_LSB _u(4) -#define PWM_CH0_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH0_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH0_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH0_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH0_CSR_DIVMODE_MSB _u(5) +#define PWM_CH0_CSR_DIVMODE_LSB _u(4) +#define PWM_CH0_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH0_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH0_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH0_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH0_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH0_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH0_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH0_CSR_B_INV // Description : Invert output B @@ -99,7 +99,6 @@ #define PWM_CH0_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH0_DIV_INT -// Description : None #define PWM_CH0_DIV_INT_RESET _u(0x01) #define PWM_CH0_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH0_DIV_INT_MSB _u(11) @@ -107,7 +106,6 @@ #define PWM_CH0_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH0_DIV_FRAC -// Description : None #define PWM_CH0_DIV_FRAC_RESET _u(0x0) #define PWM_CH0_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH0_DIV_FRAC_MSB _u(3) @@ -130,7 +128,6 @@ #define PWM_CH0_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH0_CC_B -// Description : None #define PWM_CH0_CC_B_RESET _u(0x0000) #define PWM_CH0_CC_B_BITS _u(0xffff0000) #define PWM_CH0_CC_B_MSB _u(31) @@ -138,7 +135,6 @@ #define PWM_CH0_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH0_CC_A -// Description : None #define PWM_CH0_CC_A_RESET _u(0x0000) #define PWM_CH0_CC_A_BITS _u(0x0000ffff) #define PWM_CH0_CC_A_MSB _u(15) @@ -184,21 +180,19 @@ #define PWM_CH1_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH1_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH1_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH1_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH1_CSR_DIVMODE_MSB _u(5) -#define PWM_CH1_CSR_DIVMODE_LSB _u(4) -#define PWM_CH1_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH1_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH1_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH1_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH1_CSR_DIVMODE_MSB _u(5) +#define PWM_CH1_CSR_DIVMODE_LSB _u(4) +#define PWM_CH1_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH1_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH1_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH1_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH1_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH1_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH1_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH1_CSR_B_INV // Description : Invert output B @@ -241,7 +235,6 @@ #define PWM_CH1_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH1_DIV_INT -// Description : None #define PWM_CH1_DIV_INT_RESET _u(0x01) #define PWM_CH1_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH1_DIV_INT_MSB _u(11) @@ -249,7 +242,6 @@ #define PWM_CH1_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH1_DIV_FRAC -// Description : None #define PWM_CH1_DIV_FRAC_RESET _u(0x0) #define PWM_CH1_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH1_DIV_FRAC_MSB _u(3) @@ -272,7 +264,6 @@ #define PWM_CH1_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH1_CC_B -// Description : None #define PWM_CH1_CC_B_RESET _u(0x0000) #define PWM_CH1_CC_B_BITS _u(0xffff0000) #define PWM_CH1_CC_B_MSB _u(31) @@ -280,7 +271,6 @@ #define PWM_CH1_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH1_CC_A -// Description : None #define PWM_CH1_CC_A_RESET _u(0x0000) #define PWM_CH1_CC_A_BITS _u(0x0000ffff) #define PWM_CH1_CC_A_MSB _u(15) @@ -326,21 +316,19 @@ #define PWM_CH2_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH2_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH2_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH2_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH2_CSR_DIVMODE_MSB _u(5) -#define PWM_CH2_CSR_DIVMODE_LSB _u(4) -#define PWM_CH2_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH2_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH2_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH2_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH2_CSR_DIVMODE_MSB _u(5) +#define PWM_CH2_CSR_DIVMODE_LSB _u(4) +#define PWM_CH2_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH2_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH2_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH2_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH2_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH2_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH2_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH2_CSR_B_INV // Description : Invert output B @@ -383,7 +371,6 @@ #define PWM_CH2_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH2_DIV_INT -// Description : None #define PWM_CH2_DIV_INT_RESET _u(0x01) #define PWM_CH2_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH2_DIV_INT_MSB _u(11) @@ -391,7 +378,6 @@ #define PWM_CH2_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH2_DIV_FRAC -// Description : None #define PWM_CH2_DIV_FRAC_RESET _u(0x0) #define PWM_CH2_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH2_DIV_FRAC_MSB _u(3) @@ -414,7 +400,6 @@ #define PWM_CH2_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH2_CC_B -// Description : None #define PWM_CH2_CC_B_RESET _u(0x0000) #define PWM_CH2_CC_B_BITS _u(0xffff0000) #define PWM_CH2_CC_B_MSB _u(31) @@ -422,7 +407,6 @@ #define PWM_CH2_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH2_CC_A -// Description : None #define PWM_CH2_CC_A_RESET _u(0x0000) #define PWM_CH2_CC_A_BITS _u(0x0000ffff) #define PWM_CH2_CC_A_MSB _u(15) @@ -468,21 +452,19 @@ #define PWM_CH3_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH3_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH3_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH3_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH3_CSR_DIVMODE_MSB _u(5) -#define PWM_CH3_CSR_DIVMODE_LSB _u(4) -#define PWM_CH3_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH3_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH3_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH3_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH3_CSR_DIVMODE_MSB _u(5) +#define PWM_CH3_CSR_DIVMODE_LSB _u(4) +#define PWM_CH3_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH3_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH3_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH3_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH3_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH3_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH3_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH3_CSR_B_INV // Description : Invert output B @@ -525,7 +507,6 @@ #define PWM_CH3_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH3_DIV_INT -// Description : None #define PWM_CH3_DIV_INT_RESET _u(0x01) #define PWM_CH3_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH3_DIV_INT_MSB _u(11) @@ -533,7 +514,6 @@ #define PWM_CH3_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH3_DIV_FRAC -// Description : None #define PWM_CH3_DIV_FRAC_RESET _u(0x0) #define PWM_CH3_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH3_DIV_FRAC_MSB _u(3) @@ -556,7 +536,6 @@ #define PWM_CH3_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH3_CC_B -// Description : None #define PWM_CH3_CC_B_RESET _u(0x0000) #define PWM_CH3_CC_B_BITS _u(0xffff0000) #define PWM_CH3_CC_B_MSB _u(31) @@ -564,7 +543,6 @@ #define PWM_CH3_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH3_CC_A -// Description : None #define PWM_CH3_CC_A_RESET _u(0x0000) #define PWM_CH3_CC_A_BITS _u(0x0000ffff) #define PWM_CH3_CC_A_MSB _u(15) @@ -610,21 +588,19 @@ #define PWM_CH4_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH4_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH4_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH4_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH4_CSR_DIVMODE_MSB _u(5) -#define PWM_CH4_CSR_DIVMODE_LSB _u(4) -#define PWM_CH4_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH4_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH4_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH4_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH4_CSR_DIVMODE_MSB _u(5) +#define PWM_CH4_CSR_DIVMODE_LSB _u(4) +#define PWM_CH4_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH4_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH4_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH4_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH4_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH4_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH4_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH4_CSR_B_INV // Description : Invert output B @@ -667,7 +643,6 @@ #define PWM_CH4_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH4_DIV_INT -// Description : None #define PWM_CH4_DIV_INT_RESET _u(0x01) #define PWM_CH4_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH4_DIV_INT_MSB _u(11) @@ -675,7 +650,6 @@ #define PWM_CH4_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH4_DIV_FRAC -// Description : None #define PWM_CH4_DIV_FRAC_RESET _u(0x0) #define PWM_CH4_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH4_DIV_FRAC_MSB _u(3) @@ -698,7 +672,6 @@ #define PWM_CH4_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH4_CC_B -// Description : None #define PWM_CH4_CC_B_RESET _u(0x0000) #define PWM_CH4_CC_B_BITS _u(0xffff0000) #define PWM_CH4_CC_B_MSB _u(31) @@ -706,7 +679,6 @@ #define PWM_CH4_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH4_CC_A -// Description : None #define PWM_CH4_CC_A_RESET _u(0x0000) #define PWM_CH4_CC_A_BITS _u(0x0000ffff) #define PWM_CH4_CC_A_MSB _u(15) @@ -752,21 +724,19 @@ #define PWM_CH5_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH5_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH5_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH5_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH5_CSR_DIVMODE_MSB _u(5) -#define PWM_CH5_CSR_DIVMODE_LSB _u(4) -#define PWM_CH5_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH5_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH5_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH5_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH5_CSR_DIVMODE_MSB _u(5) +#define PWM_CH5_CSR_DIVMODE_LSB _u(4) +#define PWM_CH5_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH5_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH5_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH5_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH5_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH5_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH5_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH5_CSR_B_INV // Description : Invert output B @@ -809,7 +779,6 @@ #define PWM_CH5_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH5_DIV_INT -// Description : None #define PWM_CH5_DIV_INT_RESET _u(0x01) #define PWM_CH5_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH5_DIV_INT_MSB _u(11) @@ -817,7 +786,6 @@ #define PWM_CH5_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH5_DIV_FRAC -// Description : None #define PWM_CH5_DIV_FRAC_RESET _u(0x0) #define PWM_CH5_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH5_DIV_FRAC_MSB _u(3) @@ -840,7 +808,6 @@ #define PWM_CH5_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH5_CC_B -// Description : None #define PWM_CH5_CC_B_RESET _u(0x0000) #define PWM_CH5_CC_B_BITS _u(0xffff0000) #define PWM_CH5_CC_B_MSB _u(31) @@ -848,7 +815,6 @@ #define PWM_CH5_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH5_CC_A -// Description : None #define PWM_CH5_CC_A_RESET _u(0x0000) #define PWM_CH5_CC_A_BITS _u(0x0000ffff) #define PWM_CH5_CC_A_MSB _u(15) @@ -894,21 +860,19 @@ #define PWM_CH6_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH6_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH6_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH6_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH6_CSR_DIVMODE_MSB _u(5) -#define PWM_CH6_CSR_DIVMODE_LSB _u(4) -#define PWM_CH6_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH6_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH6_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH6_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH6_CSR_DIVMODE_MSB _u(5) +#define PWM_CH6_CSR_DIVMODE_LSB _u(4) +#define PWM_CH6_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH6_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH6_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH6_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH6_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH6_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH6_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH6_CSR_B_INV // Description : Invert output B @@ -951,7 +915,6 @@ #define PWM_CH6_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH6_DIV_INT -// Description : None #define PWM_CH6_DIV_INT_RESET _u(0x01) #define PWM_CH6_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH6_DIV_INT_MSB _u(11) @@ -959,7 +922,6 @@ #define PWM_CH6_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH6_DIV_FRAC -// Description : None #define PWM_CH6_DIV_FRAC_RESET _u(0x0) #define PWM_CH6_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH6_DIV_FRAC_MSB _u(3) @@ -982,7 +944,6 @@ #define PWM_CH6_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH6_CC_B -// Description : None #define PWM_CH6_CC_B_RESET _u(0x0000) #define PWM_CH6_CC_B_BITS _u(0xffff0000) #define PWM_CH6_CC_B_MSB _u(31) @@ -990,7 +951,6 @@ #define PWM_CH6_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH6_CC_A -// Description : None #define PWM_CH6_CC_A_RESET _u(0x0000) #define PWM_CH6_CC_A_BITS _u(0x0000ffff) #define PWM_CH6_CC_A_MSB _u(15) @@ -1036,21 +996,19 @@ #define PWM_CH7_CSR_PH_RET_ACCESS "SC" // ----------------------------------------------------------------------------- // Field : PWM_CH7_CSR_DIVMODE -// Description : 0x0 -> Free-running counting at rate dictated by fractional -// divider +// 0x0 -> Free-running counting at rate dictated by fractional divider // 0x1 -> Fractional divider operation is gated by the PWM B pin. // 0x2 -> Counter advances with each rising edge of the PWM B pin. -// 0x3 -> Counter advances with each falling edge of the PWM B -// pin. -#define PWM_CH7_CSR_DIVMODE_RESET _u(0x0) -#define PWM_CH7_CSR_DIVMODE_BITS _u(0x00000030) -#define PWM_CH7_CSR_DIVMODE_MSB _u(5) -#define PWM_CH7_CSR_DIVMODE_LSB _u(4) -#define PWM_CH7_CSR_DIVMODE_ACCESS "RW" -#define PWM_CH7_CSR_DIVMODE_VALUE_DIV _u(0x0) +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH7_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH7_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH7_CSR_DIVMODE_MSB _u(5) +#define PWM_CH7_CSR_DIVMODE_LSB _u(4) +#define PWM_CH7_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH7_CSR_DIVMODE_VALUE_DIV _u(0x0) #define PWM_CH7_CSR_DIVMODE_VALUE_LEVEL _u(0x1) -#define PWM_CH7_CSR_DIVMODE_VALUE_RISE _u(0x2) -#define PWM_CH7_CSR_DIVMODE_VALUE_FALL _u(0x3) +#define PWM_CH7_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH7_CSR_DIVMODE_VALUE_FALL _u(0x3) // ----------------------------------------------------------------------------- // Field : PWM_CH7_CSR_B_INV // Description : Invert output B @@ -1093,7 +1051,6 @@ #define PWM_CH7_DIV_RESET _u(0x00000010) // ----------------------------------------------------------------------------- // Field : PWM_CH7_DIV_INT -// Description : None #define PWM_CH7_DIV_INT_RESET _u(0x01) #define PWM_CH7_DIV_INT_BITS _u(0x00000ff0) #define PWM_CH7_DIV_INT_MSB _u(11) @@ -1101,7 +1058,6 @@ #define PWM_CH7_DIV_INT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH7_DIV_FRAC -// Description : None #define PWM_CH7_DIV_FRAC_RESET _u(0x0) #define PWM_CH7_DIV_FRAC_BITS _u(0x0000000f) #define PWM_CH7_DIV_FRAC_MSB _u(3) @@ -1124,7 +1080,6 @@ #define PWM_CH7_CC_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_CH7_CC_B -// Description : None #define PWM_CH7_CC_B_RESET _u(0x0000) #define PWM_CH7_CC_B_BITS _u(0xffff0000) #define PWM_CH7_CC_B_MSB _u(31) @@ -1132,7 +1087,6 @@ #define PWM_CH7_CC_B_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_CH7_CC_A -// Description : None #define PWM_CH7_CC_A_RESET _u(0x0000) #define PWM_CH7_CC_A_BITS _u(0x0000ffff) #define PWM_CH7_CC_A_MSB _u(15) @@ -1159,7 +1113,6 @@ #define PWM_EN_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_EN_CH7 -// Description : None #define PWM_EN_CH7_RESET _u(0x0) #define PWM_EN_CH7_BITS _u(0x00000080) #define PWM_EN_CH7_MSB _u(7) @@ -1167,7 +1120,6 @@ #define PWM_EN_CH7_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH6 -// Description : None #define PWM_EN_CH6_RESET _u(0x0) #define PWM_EN_CH6_BITS _u(0x00000040) #define PWM_EN_CH6_MSB _u(6) @@ -1175,7 +1127,6 @@ #define PWM_EN_CH6_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH5 -// Description : None #define PWM_EN_CH5_RESET _u(0x0) #define PWM_EN_CH5_BITS _u(0x00000020) #define PWM_EN_CH5_MSB _u(5) @@ -1183,7 +1134,6 @@ #define PWM_EN_CH5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH4 -// Description : None #define PWM_EN_CH4_RESET _u(0x0) #define PWM_EN_CH4_BITS _u(0x00000010) #define PWM_EN_CH4_MSB _u(4) @@ -1191,7 +1141,6 @@ #define PWM_EN_CH4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH3 -// Description : None #define PWM_EN_CH3_RESET _u(0x0) #define PWM_EN_CH3_BITS _u(0x00000008) #define PWM_EN_CH3_MSB _u(3) @@ -1199,7 +1148,6 @@ #define PWM_EN_CH3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH2 -// Description : None #define PWM_EN_CH2_RESET _u(0x0) #define PWM_EN_CH2_BITS _u(0x00000004) #define PWM_EN_CH2_MSB _u(2) @@ -1207,7 +1155,6 @@ #define PWM_EN_CH2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH1 -// Description : None #define PWM_EN_CH1_RESET _u(0x0) #define PWM_EN_CH1_BITS _u(0x00000002) #define PWM_EN_CH1_MSB _u(1) @@ -1215,7 +1162,6 @@ #define PWM_EN_CH1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_EN_CH0 -// Description : None #define PWM_EN_CH0_RESET _u(0x0) #define PWM_EN_CH0_BITS _u(0x00000001) #define PWM_EN_CH0_MSB _u(0) @@ -1229,7 +1175,6 @@ #define PWM_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH7 -// Description : None #define PWM_INTR_CH7_RESET _u(0x0) #define PWM_INTR_CH7_BITS _u(0x00000080) #define PWM_INTR_CH7_MSB _u(7) @@ -1237,7 +1182,6 @@ #define PWM_INTR_CH7_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH6 -// Description : None #define PWM_INTR_CH6_RESET _u(0x0) #define PWM_INTR_CH6_BITS _u(0x00000040) #define PWM_INTR_CH6_MSB _u(6) @@ -1245,7 +1189,6 @@ #define PWM_INTR_CH6_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH5 -// Description : None #define PWM_INTR_CH5_RESET _u(0x0) #define PWM_INTR_CH5_BITS _u(0x00000020) #define PWM_INTR_CH5_MSB _u(5) @@ -1253,7 +1196,6 @@ #define PWM_INTR_CH5_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH4 -// Description : None #define PWM_INTR_CH4_RESET _u(0x0) #define PWM_INTR_CH4_BITS _u(0x00000010) #define PWM_INTR_CH4_MSB _u(4) @@ -1261,7 +1203,6 @@ #define PWM_INTR_CH4_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH3 -// Description : None #define PWM_INTR_CH3_RESET _u(0x0) #define PWM_INTR_CH3_BITS _u(0x00000008) #define PWM_INTR_CH3_MSB _u(3) @@ -1269,7 +1210,6 @@ #define PWM_INTR_CH3_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH2 -// Description : None #define PWM_INTR_CH2_RESET _u(0x0) #define PWM_INTR_CH2_BITS _u(0x00000004) #define PWM_INTR_CH2_MSB _u(2) @@ -1277,7 +1217,6 @@ #define PWM_INTR_CH2_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH1 -// Description : None #define PWM_INTR_CH1_RESET _u(0x0) #define PWM_INTR_CH1_BITS _u(0x00000002) #define PWM_INTR_CH1_MSB _u(1) @@ -1285,7 +1224,6 @@ #define PWM_INTR_CH1_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : PWM_INTR_CH0 -// Description : None #define PWM_INTR_CH0_RESET _u(0x0) #define PWM_INTR_CH0_BITS _u(0x00000001) #define PWM_INTR_CH0_MSB _u(0) @@ -1299,7 +1237,6 @@ #define PWM_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH7 -// Description : None #define PWM_INTE_CH7_RESET _u(0x0) #define PWM_INTE_CH7_BITS _u(0x00000080) #define PWM_INTE_CH7_MSB _u(7) @@ -1307,7 +1244,6 @@ #define PWM_INTE_CH7_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH6 -// Description : None #define PWM_INTE_CH6_RESET _u(0x0) #define PWM_INTE_CH6_BITS _u(0x00000040) #define PWM_INTE_CH6_MSB _u(6) @@ -1315,7 +1251,6 @@ #define PWM_INTE_CH6_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH5 -// Description : None #define PWM_INTE_CH5_RESET _u(0x0) #define PWM_INTE_CH5_BITS _u(0x00000020) #define PWM_INTE_CH5_MSB _u(5) @@ -1323,7 +1258,6 @@ #define PWM_INTE_CH5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH4 -// Description : None #define PWM_INTE_CH4_RESET _u(0x0) #define PWM_INTE_CH4_BITS _u(0x00000010) #define PWM_INTE_CH4_MSB _u(4) @@ -1331,7 +1265,6 @@ #define PWM_INTE_CH4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH3 -// Description : None #define PWM_INTE_CH3_RESET _u(0x0) #define PWM_INTE_CH3_BITS _u(0x00000008) #define PWM_INTE_CH3_MSB _u(3) @@ -1339,7 +1272,6 @@ #define PWM_INTE_CH3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH2 -// Description : None #define PWM_INTE_CH2_RESET _u(0x0) #define PWM_INTE_CH2_BITS _u(0x00000004) #define PWM_INTE_CH2_MSB _u(2) @@ -1347,7 +1279,6 @@ #define PWM_INTE_CH2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH1 -// Description : None #define PWM_INTE_CH1_RESET _u(0x0) #define PWM_INTE_CH1_BITS _u(0x00000002) #define PWM_INTE_CH1_MSB _u(1) @@ -1355,7 +1286,6 @@ #define PWM_INTE_CH1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTE_CH0 -// Description : None #define PWM_INTE_CH0_RESET _u(0x0) #define PWM_INTE_CH0_BITS _u(0x00000001) #define PWM_INTE_CH0_MSB _u(0) @@ -1369,7 +1299,6 @@ #define PWM_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH7 -// Description : None #define PWM_INTF_CH7_RESET _u(0x0) #define PWM_INTF_CH7_BITS _u(0x00000080) #define PWM_INTF_CH7_MSB _u(7) @@ -1377,7 +1306,6 @@ #define PWM_INTF_CH7_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH6 -// Description : None #define PWM_INTF_CH6_RESET _u(0x0) #define PWM_INTF_CH6_BITS _u(0x00000040) #define PWM_INTF_CH6_MSB _u(6) @@ -1385,7 +1313,6 @@ #define PWM_INTF_CH6_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH5 -// Description : None #define PWM_INTF_CH5_RESET _u(0x0) #define PWM_INTF_CH5_BITS _u(0x00000020) #define PWM_INTF_CH5_MSB _u(5) @@ -1393,7 +1320,6 @@ #define PWM_INTF_CH5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH4 -// Description : None #define PWM_INTF_CH4_RESET _u(0x0) #define PWM_INTF_CH4_BITS _u(0x00000010) #define PWM_INTF_CH4_MSB _u(4) @@ -1401,7 +1327,6 @@ #define PWM_INTF_CH4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH3 -// Description : None #define PWM_INTF_CH3_RESET _u(0x0) #define PWM_INTF_CH3_BITS _u(0x00000008) #define PWM_INTF_CH3_MSB _u(3) @@ -1409,7 +1334,6 @@ #define PWM_INTF_CH3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH2 -// Description : None #define PWM_INTF_CH2_RESET _u(0x0) #define PWM_INTF_CH2_BITS _u(0x00000004) #define PWM_INTF_CH2_MSB _u(2) @@ -1417,7 +1341,6 @@ #define PWM_INTF_CH2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH1 -// Description : None #define PWM_INTF_CH1_RESET _u(0x0) #define PWM_INTF_CH1_BITS _u(0x00000002) #define PWM_INTF_CH1_MSB _u(1) @@ -1425,7 +1348,6 @@ #define PWM_INTF_CH1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : PWM_INTF_CH0 -// Description : None #define PWM_INTF_CH0_RESET _u(0x0) #define PWM_INTF_CH0_BITS _u(0x00000001) #define PWM_INTF_CH0_MSB _u(0) @@ -1439,7 +1361,6 @@ #define PWM_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH7 -// Description : None #define PWM_INTS_CH7_RESET _u(0x0) #define PWM_INTS_CH7_BITS _u(0x00000080) #define PWM_INTS_CH7_MSB _u(7) @@ -1447,7 +1368,6 @@ #define PWM_INTS_CH7_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH6 -// Description : None #define PWM_INTS_CH6_RESET _u(0x0) #define PWM_INTS_CH6_BITS _u(0x00000040) #define PWM_INTS_CH6_MSB _u(6) @@ -1455,7 +1375,6 @@ #define PWM_INTS_CH6_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH5 -// Description : None #define PWM_INTS_CH5_RESET _u(0x0) #define PWM_INTS_CH5_BITS _u(0x00000020) #define PWM_INTS_CH5_MSB _u(5) @@ -1463,7 +1382,6 @@ #define PWM_INTS_CH5_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH4 -// Description : None #define PWM_INTS_CH4_RESET _u(0x0) #define PWM_INTS_CH4_BITS _u(0x00000010) #define PWM_INTS_CH4_MSB _u(4) @@ -1471,7 +1389,6 @@ #define PWM_INTS_CH4_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH3 -// Description : None #define PWM_INTS_CH3_RESET _u(0x0) #define PWM_INTS_CH3_BITS _u(0x00000008) #define PWM_INTS_CH3_MSB _u(3) @@ -1479,7 +1396,6 @@ #define PWM_INTS_CH3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH2 -// Description : None #define PWM_INTS_CH2_RESET _u(0x0) #define PWM_INTS_CH2_BITS _u(0x00000004) #define PWM_INTS_CH2_MSB _u(2) @@ -1487,7 +1403,6 @@ #define PWM_INTS_CH2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH1 -// Description : None #define PWM_INTS_CH1_RESET _u(0x0) #define PWM_INTS_CH1_BITS _u(0x00000002) #define PWM_INTS_CH1_MSB _u(1) @@ -1495,11 +1410,11 @@ #define PWM_INTS_CH1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : PWM_INTS_CH0 -// Description : None #define PWM_INTS_CH0_RESET _u(0x0) #define PWM_INTS_CH0_BITS _u(0x00000001) #define PWM_INTS_CH0_MSB _u(0) #define PWM_INTS_CH0_LSB _u(0) #define PWM_INTS_CH0_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_PWM_DEFINED +#endif // _HARDWARE_REGS_PWM_H + diff --git a/lib/rp2040/hardware/regs/resets.h b/lib/pico-sdk/rp2040/hardware/regs/resets.h index 689a358b..03a56e75 100644 --- a/lib/rp2040/hardware/regs/resets.h +++ b/lib/pico-sdk/rp2040/hardware/regs/resets.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : RESETS // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_RESETS_DEFINED -#define HARDWARE_REGS_RESETS_DEFINED +#ifndef _HARDWARE_REGS_RESETS_H +#define _HARDWARE_REGS_RESETS_H // ============================================================================= // Register : RESETS_RESET // Description : Reset control. If a bit is set it means the peripheral is in @@ -20,7 +21,6 @@ #define RESETS_RESET_RESET _u(0x01ffffff) // ----------------------------------------------------------------------------- // Field : RESETS_RESET_USBCTRL -// Description : None #define RESETS_RESET_USBCTRL_RESET _u(0x1) #define RESETS_RESET_USBCTRL_BITS _u(0x01000000) #define RESETS_RESET_USBCTRL_MSB _u(24) @@ -28,7 +28,6 @@ #define RESETS_RESET_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_UART1 -// Description : None #define RESETS_RESET_UART1_RESET _u(0x1) #define RESETS_RESET_UART1_BITS _u(0x00800000) #define RESETS_RESET_UART1_MSB _u(23) @@ -36,7 +35,6 @@ #define RESETS_RESET_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_UART0 -// Description : None #define RESETS_RESET_UART0_RESET _u(0x1) #define RESETS_RESET_UART0_BITS _u(0x00400000) #define RESETS_RESET_UART0_MSB _u(22) @@ -44,7 +42,6 @@ #define RESETS_RESET_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_TIMER -// Description : None #define RESETS_RESET_TIMER_RESET _u(0x1) #define RESETS_RESET_TIMER_BITS _u(0x00200000) #define RESETS_RESET_TIMER_MSB _u(21) @@ -52,7 +49,6 @@ #define RESETS_RESET_TIMER_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_TBMAN -// Description : None #define RESETS_RESET_TBMAN_RESET _u(0x1) #define RESETS_RESET_TBMAN_BITS _u(0x00100000) #define RESETS_RESET_TBMAN_MSB _u(20) @@ -60,7 +56,6 @@ #define RESETS_RESET_TBMAN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_SYSINFO -// Description : None #define RESETS_RESET_SYSINFO_RESET _u(0x1) #define RESETS_RESET_SYSINFO_BITS _u(0x00080000) #define RESETS_RESET_SYSINFO_MSB _u(19) @@ -68,7 +63,6 @@ #define RESETS_RESET_SYSINFO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_SYSCFG -// Description : None #define RESETS_RESET_SYSCFG_RESET _u(0x1) #define RESETS_RESET_SYSCFG_BITS _u(0x00040000) #define RESETS_RESET_SYSCFG_MSB _u(18) @@ -76,7 +70,6 @@ #define RESETS_RESET_SYSCFG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_SPI1 -// Description : None #define RESETS_RESET_SPI1_RESET _u(0x1) #define RESETS_RESET_SPI1_BITS _u(0x00020000) #define RESETS_RESET_SPI1_MSB _u(17) @@ -84,7 +77,6 @@ #define RESETS_RESET_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_SPI0 -// Description : None #define RESETS_RESET_SPI0_RESET _u(0x1) #define RESETS_RESET_SPI0_BITS _u(0x00010000) #define RESETS_RESET_SPI0_MSB _u(16) @@ -92,7 +84,6 @@ #define RESETS_RESET_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_RTC -// Description : None #define RESETS_RESET_RTC_RESET _u(0x1) #define RESETS_RESET_RTC_BITS _u(0x00008000) #define RESETS_RESET_RTC_MSB _u(15) @@ -100,7 +91,6 @@ #define RESETS_RESET_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PWM -// Description : None #define RESETS_RESET_PWM_RESET _u(0x1) #define RESETS_RESET_PWM_BITS _u(0x00004000) #define RESETS_RESET_PWM_MSB _u(14) @@ -108,7 +98,6 @@ #define RESETS_RESET_PWM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PLL_USB -// Description : None #define RESETS_RESET_PLL_USB_RESET _u(0x1) #define RESETS_RESET_PLL_USB_BITS _u(0x00002000) #define RESETS_RESET_PLL_USB_MSB _u(13) @@ -116,7 +105,6 @@ #define RESETS_RESET_PLL_USB_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PLL_SYS -// Description : None #define RESETS_RESET_PLL_SYS_RESET _u(0x1) #define RESETS_RESET_PLL_SYS_BITS _u(0x00001000) #define RESETS_RESET_PLL_SYS_MSB _u(12) @@ -124,7 +112,6 @@ #define RESETS_RESET_PLL_SYS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PIO1 -// Description : None #define RESETS_RESET_PIO1_RESET _u(0x1) #define RESETS_RESET_PIO1_BITS _u(0x00000800) #define RESETS_RESET_PIO1_MSB _u(11) @@ -132,7 +119,6 @@ #define RESETS_RESET_PIO1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PIO0 -// Description : None #define RESETS_RESET_PIO0_RESET _u(0x1) #define RESETS_RESET_PIO0_BITS _u(0x00000400) #define RESETS_RESET_PIO0_MSB _u(10) @@ -140,7 +126,6 @@ #define RESETS_RESET_PIO0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PADS_QSPI -// Description : None #define RESETS_RESET_PADS_QSPI_RESET _u(0x1) #define RESETS_RESET_PADS_QSPI_BITS _u(0x00000200) #define RESETS_RESET_PADS_QSPI_MSB _u(9) @@ -148,7 +133,6 @@ #define RESETS_RESET_PADS_QSPI_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_PADS_BANK0 -// Description : None #define RESETS_RESET_PADS_BANK0_RESET _u(0x1) #define RESETS_RESET_PADS_BANK0_BITS _u(0x00000100) #define RESETS_RESET_PADS_BANK0_MSB _u(8) @@ -156,7 +140,6 @@ #define RESETS_RESET_PADS_BANK0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_JTAG -// Description : None #define RESETS_RESET_JTAG_RESET _u(0x1) #define RESETS_RESET_JTAG_BITS _u(0x00000080) #define RESETS_RESET_JTAG_MSB _u(7) @@ -164,7 +147,6 @@ #define RESETS_RESET_JTAG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_IO_QSPI -// Description : None #define RESETS_RESET_IO_QSPI_RESET _u(0x1) #define RESETS_RESET_IO_QSPI_BITS _u(0x00000040) #define RESETS_RESET_IO_QSPI_MSB _u(6) @@ -172,7 +154,6 @@ #define RESETS_RESET_IO_QSPI_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_IO_BANK0 -// Description : None #define RESETS_RESET_IO_BANK0_RESET _u(0x1) #define RESETS_RESET_IO_BANK0_BITS _u(0x00000020) #define RESETS_RESET_IO_BANK0_MSB _u(5) @@ -180,7 +161,6 @@ #define RESETS_RESET_IO_BANK0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_I2C1 -// Description : None #define RESETS_RESET_I2C1_RESET _u(0x1) #define RESETS_RESET_I2C1_BITS _u(0x00000010) #define RESETS_RESET_I2C1_MSB _u(4) @@ -188,7 +168,6 @@ #define RESETS_RESET_I2C1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_I2C0 -// Description : None #define RESETS_RESET_I2C0_RESET _u(0x1) #define RESETS_RESET_I2C0_BITS _u(0x00000008) #define RESETS_RESET_I2C0_MSB _u(3) @@ -196,7 +175,6 @@ #define RESETS_RESET_I2C0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DMA -// Description : None #define RESETS_RESET_DMA_RESET _u(0x1) #define RESETS_RESET_DMA_BITS _u(0x00000004) #define RESETS_RESET_DMA_MSB _u(2) @@ -204,7 +182,6 @@ #define RESETS_RESET_DMA_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_BUSCTRL -// Description : None #define RESETS_RESET_BUSCTRL_RESET _u(0x1) #define RESETS_RESET_BUSCTRL_BITS _u(0x00000002) #define RESETS_RESET_BUSCTRL_MSB _u(1) @@ -212,7 +189,6 @@ #define RESETS_RESET_BUSCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_ADC -// Description : None #define RESETS_RESET_ADC_RESET _u(0x1) #define RESETS_RESET_ADC_BITS _u(0x00000001) #define RESETS_RESET_ADC_MSB _u(0) @@ -227,7 +203,6 @@ #define RESETS_WDSEL_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_USBCTRL -// Description : None #define RESETS_WDSEL_USBCTRL_RESET _u(0x0) #define RESETS_WDSEL_USBCTRL_BITS _u(0x01000000) #define RESETS_WDSEL_USBCTRL_MSB _u(24) @@ -235,7 +210,6 @@ #define RESETS_WDSEL_USBCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_UART1 -// Description : None #define RESETS_WDSEL_UART1_RESET _u(0x0) #define RESETS_WDSEL_UART1_BITS _u(0x00800000) #define RESETS_WDSEL_UART1_MSB _u(23) @@ -243,7 +217,6 @@ #define RESETS_WDSEL_UART1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_UART0 -// Description : None #define RESETS_WDSEL_UART0_RESET _u(0x0) #define RESETS_WDSEL_UART0_BITS _u(0x00400000) #define RESETS_WDSEL_UART0_MSB _u(22) @@ -251,7 +224,6 @@ #define RESETS_WDSEL_UART0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_TIMER -// Description : None #define RESETS_WDSEL_TIMER_RESET _u(0x0) #define RESETS_WDSEL_TIMER_BITS _u(0x00200000) #define RESETS_WDSEL_TIMER_MSB _u(21) @@ -259,7 +231,6 @@ #define RESETS_WDSEL_TIMER_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_TBMAN -// Description : None #define RESETS_WDSEL_TBMAN_RESET _u(0x0) #define RESETS_WDSEL_TBMAN_BITS _u(0x00100000) #define RESETS_WDSEL_TBMAN_MSB _u(20) @@ -267,7 +238,6 @@ #define RESETS_WDSEL_TBMAN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_SYSINFO -// Description : None #define RESETS_WDSEL_SYSINFO_RESET _u(0x0) #define RESETS_WDSEL_SYSINFO_BITS _u(0x00080000) #define RESETS_WDSEL_SYSINFO_MSB _u(19) @@ -275,7 +245,6 @@ #define RESETS_WDSEL_SYSINFO_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_SYSCFG -// Description : None #define RESETS_WDSEL_SYSCFG_RESET _u(0x0) #define RESETS_WDSEL_SYSCFG_BITS _u(0x00040000) #define RESETS_WDSEL_SYSCFG_MSB _u(18) @@ -283,7 +252,6 @@ #define RESETS_WDSEL_SYSCFG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_SPI1 -// Description : None #define RESETS_WDSEL_SPI1_RESET _u(0x0) #define RESETS_WDSEL_SPI1_BITS _u(0x00020000) #define RESETS_WDSEL_SPI1_MSB _u(17) @@ -291,7 +259,6 @@ #define RESETS_WDSEL_SPI1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_SPI0 -// Description : None #define RESETS_WDSEL_SPI0_RESET _u(0x0) #define RESETS_WDSEL_SPI0_BITS _u(0x00010000) #define RESETS_WDSEL_SPI0_MSB _u(16) @@ -299,7 +266,6 @@ #define RESETS_WDSEL_SPI0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_RTC -// Description : None #define RESETS_WDSEL_RTC_RESET _u(0x0) #define RESETS_WDSEL_RTC_BITS _u(0x00008000) #define RESETS_WDSEL_RTC_MSB _u(15) @@ -307,7 +273,6 @@ #define RESETS_WDSEL_RTC_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PWM -// Description : None #define RESETS_WDSEL_PWM_RESET _u(0x0) #define RESETS_WDSEL_PWM_BITS _u(0x00004000) #define RESETS_WDSEL_PWM_MSB _u(14) @@ -315,7 +280,6 @@ #define RESETS_WDSEL_PWM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PLL_USB -// Description : None #define RESETS_WDSEL_PLL_USB_RESET _u(0x0) #define RESETS_WDSEL_PLL_USB_BITS _u(0x00002000) #define RESETS_WDSEL_PLL_USB_MSB _u(13) @@ -323,7 +287,6 @@ #define RESETS_WDSEL_PLL_USB_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PLL_SYS -// Description : None #define RESETS_WDSEL_PLL_SYS_RESET _u(0x0) #define RESETS_WDSEL_PLL_SYS_BITS _u(0x00001000) #define RESETS_WDSEL_PLL_SYS_MSB _u(12) @@ -331,7 +294,6 @@ #define RESETS_WDSEL_PLL_SYS_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PIO1 -// Description : None #define RESETS_WDSEL_PIO1_RESET _u(0x0) #define RESETS_WDSEL_PIO1_BITS _u(0x00000800) #define RESETS_WDSEL_PIO1_MSB _u(11) @@ -339,7 +301,6 @@ #define RESETS_WDSEL_PIO1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PIO0 -// Description : None #define RESETS_WDSEL_PIO0_RESET _u(0x0) #define RESETS_WDSEL_PIO0_BITS _u(0x00000400) #define RESETS_WDSEL_PIO0_MSB _u(10) @@ -347,7 +308,6 @@ #define RESETS_WDSEL_PIO0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PADS_QSPI -// Description : None #define RESETS_WDSEL_PADS_QSPI_RESET _u(0x0) #define RESETS_WDSEL_PADS_QSPI_BITS _u(0x00000200) #define RESETS_WDSEL_PADS_QSPI_MSB _u(9) @@ -355,7 +315,6 @@ #define RESETS_WDSEL_PADS_QSPI_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_PADS_BANK0 -// Description : None #define RESETS_WDSEL_PADS_BANK0_RESET _u(0x0) #define RESETS_WDSEL_PADS_BANK0_BITS _u(0x00000100) #define RESETS_WDSEL_PADS_BANK0_MSB _u(8) @@ -363,7 +322,6 @@ #define RESETS_WDSEL_PADS_BANK0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_JTAG -// Description : None #define RESETS_WDSEL_JTAG_RESET _u(0x0) #define RESETS_WDSEL_JTAG_BITS _u(0x00000080) #define RESETS_WDSEL_JTAG_MSB _u(7) @@ -371,7 +329,6 @@ #define RESETS_WDSEL_JTAG_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_IO_QSPI -// Description : None #define RESETS_WDSEL_IO_QSPI_RESET _u(0x0) #define RESETS_WDSEL_IO_QSPI_BITS _u(0x00000040) #define RESETS_WDSEL_IO_QSPI_MSB _u(6) @@ -379,7 +336,6 @@ #define RESETS_WDSEL_IO_QSPI_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_IO_BANK0 -// Description : None #define RESETS_WDSEL_IO_BANK0_RESET _u(0x0) #define RESETS_WDSEL_IO_BANK0_BITS _u(0x00000020) #define RESETS_WDSEL_IO_BANK0_MSB _u(5) @@ -387,7 +343,6 @@ #define RESETS_WDSEL_IO_BANK0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_I2C1 -// Description : None #define RESETS_WDSEL_I2C1_RESET _u(0x0) #define RESETS_WDSEL_I2C1_BITS _u(0x00000010) #define RESETS_WDSEL_I2C1_MSB _u(4) @@ -395,7 +350,6 @@ #define RESETS_WDSEL_I2C1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_I2C0 -// Description : None #define RESETS_WDSEL_I2C0_RESET _u(0x0) #define RESETS_WDSEL_I2C0_BITS _u(0x00000008) #define RESETS_WDSEL_I2C0_MSB _u(3) @@ -403,7 +357,6 @@ #define RESETS_WDSEL_I2C0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_DMA -// Description : None #define RESETS_WDSEL_DMA_RESET _u(0x0) #define RESETS_WDSEL_DMA_BITS _u(0x00000004) #define RESETS_WDSEL_DMA_MSB _u(2) @@ -411,7 +364,6 @@ #define RESETS_WDSEL_DMA_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_BUSCTRL -// Description : None #define RESETS_WDSEL_BUSCTRL_RESET _u(0x0) #define RESETS_WDSEL_BUSCTRL_BITS _u(0x00000002) #define RESETS_WDSEL_BUSCTRL_MSB _u(1) @@ -419,7 +371,6 @@ #define RESETS_WDSEL_BUSCTRL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : RESETS_WDSEL_ADC -// Description : None #define RESETS_WDSEL_ADC_RESET _u(0x0) #define RESETS_WDSEL_ADC_BITS _u(0x00000001) #define RESETS_WDSEL_ADC_MSB _u(0) @@ -435,7 +386,6 @@ #define RESETS_RESET_DONE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_USBCTRL -// Description : None #define RESETS_RESET_DONE_USBCTRL_RESET _u(0x0) #define RESETS_RESET_DONE_USBCTRL_BITS _u(0x01000000) #define RESETS_RESET_DONE_USBCTRL_MSB _u(24) @@ -443,7 +393,6 @@ #define RESETS_RESET_DONE_USBCTRL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_UART1 -// Description : None #define RESETS_RESET_DONE_UART1_RESET _u(0x0) #define RESETS_RESET_DONE_UART1_BITS _u(0x00800000) #define RESETS_RESET_DONE_UART1_MSB _u(23) @@ -451,7 +400,6 @@ #define RESETS_RESET_DONE_UART1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_UART0 -// Description : None #define RESETS_RESET_DONE_UART0_RESET _u(0x0) #define RESETS_RESET_DONE_UART0_BITS _u(0x00400000) #define RESETS_RESET_DONE_UART0_MSB _u(22) @@ -459,7 +407,6 @@ #define RESETS_RESET_DONE_UART0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_TIMER -// Description : None #define RESETS_RESET_DONE_TIMER_RESET _u(0x0) #define RESETS_RESET_DONE_TIMER_BITS _u(0x00200000) #define RESETS_RESET_DONE_TIMER_MSB _u(21) @@ -467,7 +414,6 @@ #define RESETS_RESET_DONE_TIMER_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_TBMAN -// Description : None #define RESETS_RESET_DONE_TBMAN_RESET _u(0x0) #define RESETS_RESET_DONE_TBMAN_BITS _u(0x00100000) #define RESETS_RESET_DONE_TBMAN_MSB _u(20) @@ -475,7 +421,6 @@ #define RESETS_RESET_DONE_TBMAN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_SYSINFO -// Description : None #define RESETS_RESET_DONE_SYSINFO_RESET _u(0x0) #define RESETS_RESET_DONE_SYSINFO_BITS _u(0x00080000) #define RESETS_RESET_DONE_SYSINFO_MSB _u(19) @@ -483,7 +428,6 @@ #define RESETS_RESET_DONE_SYSINFO_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_SYSCFG -// Description : None #define RESETS_RESET_DONE_SYSCFG_RESET _u(0x0) #define RESETS_RESET_DONE_SYSCFG_BITS _u(0x00040000) #define RESETS_RESET_DONE_SYSCFG_MSB _u(18) @@ -491,7 +435,6 @@ #define RESETS_RESET_DONE_SYSCFG_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_SPI1 -// Description : None #define RESETS_RESET_DONE_SPI1_RESET _u(0x0) #define RESETS_RESET_DONE_SPI1_BITS _u(0x00020000) #define RESETS_RESET_DONE_SPI1_MSB _u(17) @@ -499,7 +442,6 @@ #define RESETS_RESET_DONE_SPI1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_SPI0 -// Description : None #define RESETS_RESET_DONE_SPI0_RESET _u(0x0) #define RESETS_RESET_DONE_SPI0_BITS _u(0x00010000) #define RESETS_RESET_DONE_SPI0_MSB _u(16) @@ -507,7 +449,6 @@ #define RESETS_RESET_DONE_SPI0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_RTC -// Description : None #define RESETS_RESET_DONE_RTC_RESET _u(0x0) #define RESETS_RESET_DONE_RTC_BITS _u(0x00008000) #define RESETS_RESET_DONE_RTC_MSB _u(15) @@ -515,7 +456,6 @@ #define RESETS_RESET_DONE_RTC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PWM -// Description : None #define RESETS_RESET_DONE_PWM_RESET _u(0x0) #define RESETS_RESET_DONE_PWM_BITS _u(0x00004000) #define RESETS_RESET_DONE_PWM_MSB _u(14) @@ -523,7 +463,6 @@ #define RESETS_RESET_DONE_PWM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PLL_USB -// Description : None #define RESETS_RESET_DONE_PLL_USB_RESET _u(0x0) #define RESETS_RESET_DONE_PLL_USB_BITS _u(0x00002000) #define RESETS_RESET_DONE_PLL_USB_MSB _u(13) @@ -531,7 +470,6 @@ #define RESETS_RESET_DONE_PLL_USB_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PLL_SYS -// Description : None #define RESETS_RESET_DONE_PLL_SYS_RESET _u(0x0) #define RESETS_RESET_DONE_PLL_SYS_BITS _u(0x00001000) #define RESETS_RESET_DONE_PLL_SYS_MSB _u(12) @@ -539,7 +477,6 @@ #define RESETS_RESET_DONE_PLL_SYS_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PIO1 -// Description : None #define RESETS_RESET_DONE_PIO1_RESET _u(0x0) #define RESETS_RESET_DONE_PIO1_BITS _u(0x00000800) #define RESETS_RESET_DONE_PIO1_MSB _u(11) @@ -547,7 +484,6 @@ #define RESETS_RESET_DONE_PIO1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PIO0 -// Description : None #define RESETS_RESET_DONE_PIO0_RESET _u(0x0) #define RESETS_RESET_DONE_PIO0_BITS _u(0x00000400) #define RESETS_RESET_DONE_PIO0_MSB _u(10) @@ -555,7 +491,6 @@ #define RESETS_RESET_DONE_PIO0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PADS_QSPI -// Description : None #define RESETS_RESET_DONE_PADS_QSPI_RESET _u(0x0) #define RESETS_RESET_DONE_PADS_QSPI_BITS _u(0x00000200) #define RESETS_RESET_DONE_PADS_QSPI_MSB _u(9) @@ -563,7 +498,6 @@ #define RESETS_RESET_DONE_PADS_QSPI_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_PADS_BANK0 -// Description : None #define RESETS_RESET_DONE_PADS_BANK0_RESET _u(0x0) #define RESETS_RESET_DONE_PADS_BANK0_BITS _u(0x00000100) #define RESETS_RESET_DONE_PADS_BANK0_MSB _u(8) @@ -571,7 +505,6 @@ #define RESETS_RESET_DONE_PADS_BANK0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_JTAG -// Description : None #define RESETS_RESET_DONE_JTAG_RESET _u(0x0) #define RESETS_RESET_DONE_JTAG_BITS _u(0x00000080) #define RESETS_RESET_DONE_JTAG_MSB _u(7) @@ -579,7 +512,6 @@ #define RESETS_RESET_DONE_JTAG_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_IO_QSPI -// Description : None #define RESETS_RESET_DONE_IO_QSPI_RESET _u(0x0) #define RESETS_RESET_DONE_IO_QSPI_BITS _u(0x00000040) #define RESETS_RESET_DONE_IO_QSPI_MSB _u(6) @@ -587,7 +519,6 @@ #define RESETS_RESET_DONE_IO_QSPI_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_IO_BANK0 -// Description : None #define RESETS_RESET_DONE_IO_BANK0_RESET _u(0x0) #define RESETS_RESET_DONE_IO_BANK0_BITS _u(0x00000020) #define RESETS_RESET_DONE_IO_BANK0_MSB _u(5) @@ -595,7 +526,6 @@ #define RESETS_RESET_DONE_IO_BANK0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_I2C1 -// Description : None #define RESETS_RESET_DONE_I2C1_RESET _u(0x0) #define RESETS_RESET_DONE_I2C1_BITS _u(0x00000010) #define RESETS_RESET_DONE_I2C1_MSB _u(4) @@ -603,7 +533,6 @@ #define RESETS_RESET_DONE_I2C1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_I2C0 -// Description : None #define RESETS_RESET_DONE_I2C0_RESET _u(0x0) #define RESETS_RESET_DONE_I2C0_BITS _u(0x00000008) #define RESETS_RESET_DONE_I2C0_MSB _u(3) @@ -611,7 +540,6 @@ #define RESETS_RESET_DONE_I2C0_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_DMA -// Description : None #define RESETS_RESET_DONE_DMA_RESET _u(0x0) #define RESETS_RESET_DONE_DMA_BITS _u(0x00000004) #define RESETS_RESET_DONE_DMA_MSB _u(2) @@ -619,7 +547,6 @@ #define RESETS_RESET_DONE_DMA_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_BUSCTRL -// Description : None #define RESETS_RESET_DONE_BUSCTRL_RESET _u(0x0) #define RESETS_RESET_DONE_BUSCTRL_BITS _u(0x00000002) #define RESETS_RESET_DONE_BUSCTRL_MSB _u(1) @@ -627,11 +554,11 @@ #define RESETS_RESET_DONE_BUSCTRL_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : RESETS_RESET_DONE_ADC -// Description : None #define RESETS_RESET_DONE_ADC_RESET _u(0x0) #define RESETS_RESET_DONE_ADC_BITS _u(0x00000001) #define RESETS_RESET_DONE_ADC_MSB _u(0) #define RESETS_RESET_DONE_ADC_LSB _u(0) #define RESETS_RESET_DONE_ADC_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_RESETS_DEFINED +#endif // _HARDWARE_REGS_RESETS_H + diff --git a/lib/rp2040/hardware/regs/rosc.h b/lib/pico-sdk/rp2040/hardware/regs/rosc.h index 5501e7ef..bd4bb9d4 100644 --- a/lib/rp2040/hardware/regs/rosc.h +++ b/lib/pico-sdk/rp2040/hardware/regs/rosc.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : ROSC // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_ROSC_DEFINED -#define HARDWARE_REGS_ROSC_DEFINED +#ifndef _HARDWARE_REGS_ROSC_H +#define _HARDWARE_REGS_ROSC_H // ============================================================================= // Register : ROSC_CTRL // Description : Ring Oscillator control @@ -27,20 +28,20 @@ // oscillator. // 0xd1e -> DISABLE // 0xfab -> ENABLE -#define ROSC_CTRL_ENABLE_RESET "-" -#define ROSC_CTRL_ENABLE_BITS _u(0x00fff000) -#define ROSC_CTRL_ENABLE_MSB _u(23) -#define ROSC_CTRL_ENABLE_LSB _u(12) -#define ROSC_CTRL_ENABLE_ACCESS "RW" +#define ROSC_CTRL_ENABLE_RESET "-" +#define ROSC_CTRL_ENABLE_BITS _u(0x00fff000) +#define ROSC_CTRL_ENABLE_MSB _u(23) +#define ROSC_CTRL_ENABLE_LSB _u(12) +#define ROSC_CTRL_ENABLE_ACCESS "RW" #define ROSC_CTRL_ENABLE_VALUE_DISABLE _u(0xd1e) -#define ROSC_CTRL_ENABLE_VALUE_ENABLE _u(0xfab) +#define ROSC_CTRL_ENABLE_VALUE_ENABLE _u(0xfab) // ----------------------------------------------------------------------------- // Field : ROSC_CTRL_FREQ_RANGE // Description : Controls the number of delay stages in the ROSC ring // LOW uses stages 0 to 7 -// MEDIUM uses stages 0 to 5 -// HIGH uses stages 0 to 3 -// TOOHIGH uses stages 0 to 1 and should not be used because its +// MEDIUM uses stages 2 to 7 +// HIGH uses stages 4 to 7 +// TOOHIGH uses stages 6 to 7 and should not be used because its // frequency exceeds design specifications // The clock output will not glitch when changing the range up one // step at a time @@ -51,14 +52,14 @@ // 0xfa5 -> MEDIUM // 0xfa7 -> HIGH // 0xfa6 -> TOOHIGH -#define ROSC_CTRL_FREQ_RANGE_RESET _u(0xaa0) -#define ROSC_CTRL_FREQ_RANGE_BITS _u(0x00000fff) -#define ROSC_CTRL_FREQ_RANGE_MSB _u(11) -#define ROSC_CTRL_FREQ_RANGE_LSB _u(0) -#define ROSC_CTRL_FREQ_RANGE_ACCESS "RW" -#define ROSC_CTRL_FREQ_RANGE_VALUE_LOW _u(0xfa4) -#define ROSC_CTRL_FREQ_RANGE_VALUE_MEDIUM _u(0xfa5) -#define ROSC_CTRL_FREQ_RANGE_VALUE_HIGH _u(0xfa7) +#define ROSC_CTRL_FREQ_RANGE_RESET _u(0xaa0) +#define ROSC_CTRL_FREQ_RANGE_BITS _u(0x00000fff) +#define ROSC_CTRL_FREQ_RANGE_MSB _u(11) +#define ROSC_CTRL_FREQ_RANGE_LSB _u(0) +#define ROSC_CTRL_FREQ_RANGE_ACCESS "RW" +#define ROSC_CTRL_FREQ_RANGE_VALUE_LOW _u(0xfa4) +#define ROSC_CTRL_FREQ_RANGE_VALUE_MEDIUM _u(0xfa5) +#define ROSC_CTRL_FREQ_RANGE_VALUE_HIGH _u(0xfa7) #define ROSC_CTRL_FREQ_RANGE_VALUE_TOOHIGH _u(0xfa6) // ============================================================================= // Register : ROSC_FREQA @@ -80,11 +81,11 @@ // Description : Set to 0x9696 to apply the settings // Any other value in this field will set all drive strengths to 0 // 0x9696 -> PASS -#define ROSC_FREQA_PASSWD_RESET _u(0x0000) -#define ROSC_FREQA_PASSWD_BITS _u(0xffff0000) -#define ROSC_FREQA_PASSWD_MSB _u(31) -#define ROSC_FREQA_PASSWD_LSB _u(16) -#define ROSC_FREQA_PASSWD_ACCESS "RW" +#define ROSC_FREQA_PASSWD_RESET _u(0x0000) +#define ROSC_FREQA_PASSWD_BITS _u(0xffff0000) +#define ROSC_FREQA_PASSWD_MSB _u(31) +#define ROSC_FREQA_PASSWD_LSB _u(16) +#define ROSC_FREQA_PASSWD_ACCESS "RW" #define ROSC_FREQA_PASSWD_VALUE_PASS _u(0x9696) // ----------------------------------------------------------------------------- // Field : ROSC_FREQA_DS3 @@ -129,11 +130,11 @@ // Description : Set to 0x9696 to apply the settings // Any other value in this field will set all drive strengths to 0 // 0x9696 -> PASS -#define ROSC_FREQB_PASSWD_RESET _u(0x0000) -#define ROSC_FREQB_PASSWD_BITS _u(0xffff0000) -#define ROSC_FREQB_PASSWD_MSB _u(31) -#define ROSC_FREQB_PASSWD_LSB _u(16) -#define ROSC_FREQB_PASSWD_ACCESS "RW" +#define ROSC_FREQB_PASSWD_RESET _u(0x0000) +#define ROSC_FREQB_PASSWD_BITS _u(0xffff0000) +#define ROSC_FREQB_PASSWD_MSB _u(31) +#define ROSC_FREQB_PASSWD_LSB _u(16) +#define ROSC_FREQB_PASSWD_ACCESS "RW" #define ROSC_FREQB_PASSWD_VALUE_PASS _u(0x9696) // ----------------------------------------------------------------------------- // Field : ROSC_FREQB_DS7 @@ -174,16 +175,16 @@ // On power-up this field is initialised to WAKE // An invalid write will also select WAKE // Warning: setup the irq before selecting dormant mode -// 0x636f6d61 -> DORMANT +// 0x636f6d61 -> dormant // 0x77616b65 -> WAKE -#define ROSC_DORMANT_OFFSET _u(0x0000000c) -#define ROSC_DORMANT_BITS _u(0xffffffff) -#define ROSC_DORMANT_RESET "-" -#define ROSC_DORMANT_MSB _u(31) -#define ROSC_DORMANT_LSB _u(0) -#define ROSC_DORMANT_ACCESS "RW" +#define ROSC_DORMANT_OFFSET _u(0x0000000c) +#define ROSC_DORMANT_BITS _u(0xffffffff) +#define ROSC_DORMANT_RESET "-" +#define ROSC_DORMANT_MSB _u(31) +#define ROSC_DORMANT_LSB _u(0) +#define ROSC_DORMANT_ACCESS "RW" #define ROSC_DORMANT_VALUE_DORMANT _u(0x636f6d61) -#define ROSC_DORMANT_VALUE_WAKE _u(0x77616b65) +#define ROSC_DORMANT_VALUE_WAKE _u(0x77616b65) // ============================================================================= // Register : ROSC_DIV // Description : Controls the output divider @@ -193,12 +194,12 @@ // any other value sets div=31 // this register resets to div=16 // 0xaa0 -> PASS -#define ROSC_DIV_OFFSET _u(0x00000010) -#define ROSC_DIV_BITS _u(0x00000fff) -#define ROSC_DIV_RESET "-" -#define ROSC_DIV_MSB _u(11) -#define ROSC_DIV_LSB _u(0) -#define ROSC_DIV_ACCESS "RW" +#define ROSC_DIV_OFFSET _u(0x00000010) +#define ROSC_DIV_BITS _u(0x00000fff) +#define ROSC_DIV_RESET "-" +#define ROSC_DIV_MSB _u(11) +#define ROSC_DIV_LSB _u(0) +#define ROSC_DIV_ACCESS "RW" #define ROSC_DIV_VALUE_PASS _u(0xaa0) // ============================================================================= // Register : ROSC_PHASE @@ -309,4 +310,5 @@ #define ROSC_COUNT_LSB _u(0) #define ROSC_COUNT_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_ROSC_DEFINED +#endif // _HARDWARE_REGS_ROSC_H + diff --git a/lib/rp2040/hardware/regs/rtc.h b/lib/pico-sdk/rp2040/hardware/regs/rtc.h index 7d62c9d7..86d519eb 100644 --- a/lib/rp2040/hardware/regs/rtc.h +++ b/lib/pico-sdk/rp2040/hardware/regs/rtc.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : Register block to control RTC // ============================================================================= -#ifndef HARDWARE_REGS_RTC_DEFINED -#define HARDWARE_REGS_RTC_DEFINED +#ifndef _HARDWARE_REGS_RTC_H +#define _HARDWARE_REGS_RTC_H // ============================================================================= // Register : RTC_CLKDIV_M1 // Description : Divider minus 1 for the 1 second counter. Safe to change the @@ -136,7 +138,6 @@ #define RTC_IRQ_SETUP_0_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RTC_IRQ_SETUP_0_MATCH_ACTIVE -// Description : None #define RTC_IRQ_SETUP_0_MATCH_ACTIVE_RESET "-" #define RTC_IRQ_SETUP_0_MATCH_ACTIVE_BITS _u(0x20000000) #define RTC_IRQ_SETUP_0_MATCH_ACTIVE_MSB _u(29) @@ -346,7 +347,6 @@ #define RTC_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RTC_INTR_RTC -// Description : None #define RTC_INTR_RTC_RESET _u(0x0) #define RTC_INTR_RTC_BITS _u(0x00000001) #define RTC_INTR_RTC_MSB _u(0) @@ -360,7 +360,6 @@ #define RTC_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RTC_INTE_RTC -// Description : None #define RTC_INTE_RTC_RESET _u(0x0) #define RTC_INTE_RTC_BITS _u(0x00000001) #define RTC_INTE_RTC_MSB _u(0) @@ -374,7 +373,6 @@ #define RTC_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RTC_INTF_RTC -// Description : None #define RTC_INTF_RTC_RESET _u(0x0) #define RTC_INTF_RTC_BITS _u(0x00000001) #define RTC_INTF_RTC_MSB _u(0) @@ -388,11 +386,11 @@ #define RTC_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : RTC_INTS_RTC -// Description : None #define RTC_INTS_RTC_RESET _u(0x0) #define RTC_INTS_RTC_BITS _u(0x00000001) #define RTC_INTS_RTC_MSB _u(0) #define RTC_INTS_RTC_LSB _u(0) #define RTC_INTS_RTC_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_RTC_DEFINED +#endif // _HARDWARE_REGS_RTC_H + diff --git a/lib/rp2040/hardware/regs/sio.h b/lib/pico-sdk/rp2040/hardware/regs/sio.h index 37ee2c13..2d720e92 100644 --- a/lib/rp2040/hardware/regs/sio.h +++ b/lib/pico-sdk/rp2040/hardware/regs/sio.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -11,8 +13,8 @@ // Provides core-local and inter-core hardware for the two // processors, with single-cycle access. // ============================================================================= -#ifndef HARDWARE_REGS_SIO_DEFINED -#define HARDWARE_REGS_SIO_DEFINED +#ifndef _HARDWARE_REGS_SIO_H +#define _HARDWARE_REGS_SIO_H // ============================================================================= // Register : SIO_CPUID // Description : Processor core identifier @@ -71,7 +73,7 @@ #define SIO_GPIO_OUT_SET_RESET _u(0x00000000) #define SIO_GPIO_OUT_SET_MSB _u(29) #define SIO_GPIO_OUT_SET_LSB _u(0) -#define SIO_GPIO_OUT_SET_ACCESS "RW" +#define SIO_GPIO_OUT_SET_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_OUT_CLR // Description : GPIO output value clear @@ -82,7 +84,7 @@ #define SIO_GPIO_OUT_CLR_RESET _u(0x00000000) #define SIO_GPIO_OUT_CLR_MSB _u(29) #define SIO_GPIO_OUT_CLR_LSB _u(0) -#define SIO_GPIO_OUT_CLR_ACCESS "RW" +#define SIO_GPIO_OUT_CLR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_OUT_XOR // Description : GPIO output value XOR @@ -93,7 +95,7 @@ #define SIO_GPIO_OUT_XOR_RESET _u(0x00000000) #define SIO_GPIO_OUT_XOR_MSB _u(29) #define SIO_GPIO_OUT_XOR_LSB _u(0) -#define SIO_GPIO_OUT_XOR_ACCESS "RW" +#define SIO_GPIO_OUT_XOR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_OE // Description : GPIO output enable @@ -119,7 +121,7 @@ #define SIO_GPIO_OE_SET_RESET _u(0x00000000) #define SIO_GPIO_OE_SET_MSB _u(29) #define SIO_GPIO_OE_SET_LSB _u(0) -#define SIO_GPIO_OE_SET_ACCESS "RW" +#define SIO_GPIO_OE_SET_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_OE_CLR // Description : GPIO output enable clear @@ -130,7 +132,7 @@ #define SIO_GPIO_OE_CLR_RESET _u(0x00000000) #define SIO_GPIO_OE_CLR_MSB _u(29) #define SIO_GPIO_OE_CLR_LSB _u(0) -#define SIO_GPIO_OE_CLR_ACCESS "RW" +#define SIO_GPIO_OE_CLR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_OE_XOR // Description : GPIO output enable XOR @@ -141,7 +143,7 @@ #define SIO_GPIO_OE_XOR_RESET _u(0x00000000) #define SIO_GPIO_OE_XOR_MSB _u(29) #define SIO_GPIO_OE_XOR_LSB _u(0) -#define SIO_GPIO_OE_XOR_ACCESS "RW" +#define SIO_GPIO_OE_XOR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OUT // Description : QSPI output value @@ -169,7 +171,7 @@ #define SIO_GPIO_HI_OUT_SET_RESET _u(0x00000000) #define SIO_GPIO_HI_OUT_SET_MSB _u(5) #define SIO_GPIO_HI_OUT_SET_LSB _u(0) -#define SIO_GPIO_HI_OUT_SET_ACCESS "RW" +#define SIO_GPIO_HI_OUT_SET_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OUT_CLR // Description : QSPI output value clear @@ -180,7 +182,7 @@ #define SIO_GPIO_HI_OUT_CLR_RESET _u(0x00000000) #define SIO_GPIO_HI_OUT_CLR_MSB _u(5) #define SIO_GPIO_HI_OUT_CLR_LSB _u(0) -#define SIO_GPIO_HI_OUT_CLR_ACCESS "RW" +#define SIO_GPIO_HI_OUT_CLR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OUT_XOR // Description : QSPI output value XOR @@ -191,7 +193,7 @@ #define SIO_GPIO_HI_OUT_XOR_RESET _u(0x00000000) #define SIO_GPIO_HI_OUT_XOR_MSB _u(5) #define SIO_GPIO_HI_OUT_XOR_LSB _u(0) -#define SIO_GPIO_HI_OUT_XOR_ACCESS "RW" +#define SIO_GPIO_HI_OUT_XOR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OE // Description : QSPI output enable @@ -218,7 +220,7 @@ #define SIO_GPIO_HI_OE_SET_RESET _u(0x00000000) #define SIO_GPIO_HI_OE_SET_MSB _u(5) #define SIO_GPIO_HI_OE_SET_LSB _u(0) -#define SIO_GPIO_HI_OE_SET_ACCESS "RW" +#define SIO_GPIO_HI_OE_SET_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OE_CLR // Description : QSPI output enable clear @@ -229,7 +231,7 @@ #define SIO_GPIO_HI_OE_CLR_RESET _u(0x00000000) #define SIO_GPIO_HI_OE_CLR_MSB _u(5) #define SIO_GPIO_HI_OE_CLR_LSB _u(0) -#define SIO_GPIO_HI_OE_CLR_ACCESS "RW" +#define SIO_GPIO_HI_OE_CLR_ACCESS "WO" // ============================================================================= // Register : SIO_GPIO_HI_OE_XOR // Description : QSPI output enable XOR @@ -240,7 +242,7 @@ #define SIO_GPIO_HI_OE_XOR_RESET _u(0x00000000) #define SIO_GPIO_HI_OE_XOR_MSB _u(5) #define SIO_GPIO_HI_OE_XOR_LSB _u(0) -#define SIO_GPIO_HI_OE_XOR_ACCESS "RW" +#define SIO_GPIO_HI_OE_XOR_ACCESS "WO" // ============================================================================= // Register : SIO_FIFO_ST // Description : Status register for inter-core FIFOs (mailboxes). @@ -344,7 +346,7 @@ // q`. // Any operand write starts a new calculation. The results appear // in QUOTIENT, REMAINDER. -// UDIVIDEND/SDIVIDEND are aliases of the same internal register. +// UDIVISOR/SDIVISOR are aliases of the same internal register. // The U alias starts an // unsigned calculation, and the S alias starts a signed // calculation. @@ -440,8 +442,8 @@ // Writing an operand (xDIVIDEND, xDIVISOR) will immediately start // a new calculation, no // matter if one is already in progress. -// Writing to a result register will immediately terminate any -// in-progress calculation +// Writing to a result register will immediately terminate any in- +// progress calculation // and set the READY and DIRTY flags. #define SIO_DIV_CSR_READY_RESET _u(0x1) #define SIO_DIV_CSR_READY_BITS _u(0x00000001) @@ -1155,7 +1157,7 @@ #define SIO_SPINLOCK0_RESET _u(0x00000000) #define SIO_SPINLOCK0_MSB _u(31) #define SIO_SPINLOCK0_LSB _u(0) -#define SIO_SPINLOCK0_ACCESS "RO" +#define SIO_SPINLOCK0_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK1 // Description : Reading from a spinlock address will: @@ -1171,7 +1173,7 @@ #define SIO_SPINLOCK1_RESET _u(0x00000000) #define SIO_SPINLOCK1_MSB _u(31) #define SIO_SPINLOCK1_LSB _u(0) -#define SIO_SPINLOCK1_ACCESS "RO" +#define SIO_SPINLOCK1_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK2 // Description : Reading from a spinlock address will: @@ -1187,7 +1189,7 @@ #define SIO_SPINLOCK2_RESET _u(0x00000000) #define SIO_SPINLOCK2_MSB _u(31) #define SIO_SPINLOCK2_LSB _u(0) -#define SIO_SPINLOCK2_ACCESS "RO" +#define SIO_SPINLOCK2_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK3 // Description : Reading from a spinlock address will: @@ -1203,7 +1205,7 @@ #define SIO_SPINLOCK3_RESET _u(0x00000000) #define SIO_SPINLOCK3_MSB _u(31) #define SIO_SPINLOCK3_LSB _u(0) -#define SIO_SPINLOCK3_ACCESS "RO" +#define SIO_SPINLOCK3_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK4 // Description : Reading from a spinlock address will: @@ -1219,7 +1221,7 @@ #define SIO_SPINLOCK4_RESET _u(0x00000000) #define SIO_SPINLOCK4_MSB _u(31) #define SIO_SPINLOCK4_LSB _u(0) -#define SIO_SPINLOCK4_ACCESS "RO" +#define SIO_SPINLOCK4_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK5 // Description : Reading from a spinlock address will: @@ -1235,7 +1237,7 @@ #define SIO_SPINLOCK5_RESET _u(0x00000000) #define SIO_SPINLOCK5_MSB _u(31) #define SIO_SPINLOCK5_LSB _u(0) -#define SIO_SPINLOCK5_ACCESS "RO" +#define SIO_SPINLOCK5_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK6 // Description : Reading from a spinlock address will: @@ -1251,7 +1253,7 @@ #define SIO_SPINLOCK6_RESET _u(0x00000000) #define SIO_SPINLOCK6_MSB _u(31) #define SIO_SPINLOCK6_LSB _u(0) -#define SIO_SPINLOCK6_ACCESS "RO" +#define SIO_SPINLOCK6_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK7 // Description : Reading from a spinlock address will: @@ -1267,7 +1269,7 @@ #define SIO_SPINLOCK7_RESET _u(0x00000000) #define SIO_SPINLOCK7_MSB _u(31) #define SIO_SPINLOCK7_LSB _u(0) -#define SIO_SPINLOCK7_ACCESS "RO" +#define SIO_SPINLOCK7_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK8 // Description : Reading from a spinlock address will: @@ -1283,7 +1285,7 @@ #define SIO_SPINLOCK8_RESET _u(0x00000000) #define SIO_SPINLOCK8_MSB _u(31) #define SIO_SPINLOCK8_LSB _u(0) -#define SIO_SPINLOCK8_ACCESS "RO" +#define SIO_SPINLOCK8_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK9 // Description : Reading from a spinlock address will: @@ -1299,7 +1301,7 @@ #define SIO_SPINLOCK9_RESET _u(0x00000000) #define SIO_SPINLOCK9_MSB _u(31) #define SIO_SPINLOCK9_LSB _u(0) -#define SIO_SPINLOCK9_ACCESS "RO" +#define SIO_SPINLOCK9_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK10 // Description : Reading from a spinlock address will: @@ -1315,7 +1317,7 @@ #define SIO_SPINLOCK10_RESET _u(0x00000000) #define SIO_SPINLOCK10_MSB _u(31) #define SIO_SPINLOCK10_LSB _u(0) -#define SIO_SPINLOCK10_ACCESS "RO" +#define SIO_SPINLOCK10_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK11 // Description : Reading from a spinlock address will: @@ -1331,7 +1333,7 @@ #define SIO_SPINLOCK11_RESET _u(0x00000000) #define SIO_SPINLOCK11_MSB _u(31) #define SIO_SPINLOCK11_LSB _u(0) -#define SIO_SPINLOCK11_ACCESS "RO" +#define SIO_SPINLOCK11_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK12 // Description : Reading from a spinlock address will: @@ -1347,7 +1349,7 @@ #define SIO_SPINLOCK12_RESET _u(0x00000000) #define SIO_SPINLOCK12_MSB _u(31) #define SIO_SPINLOCK12_LSB _u(0) -#define SIO_SPINLOCK12_ACCESS "RO" +#define SIO_SPINLOCK12_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK13 // Description : Reading from a spinlock address will: @@ -1363,7 +1365,7 @@ #define SIO_SPINLOCK13_RESET _u(0x00000000) #define SIO_SPINLOCK13_MSB _u(31) #define SIO_SPINLOCK13_LSB _u(0) -#define SIO_SPINLOCK13_ACCESS "RO" +#define SIO_SPINLOCK13_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK14 // Description : Reading from a spinlock address will: @@ -1379,7 +1381,7 @@ #define SIO_SPINLOCK14_RESET _u(0x00000000) #define SIO_SPINLOCK14_MSB _u(31) #define SIO_SPINLOCK14_LSB _u(0) -#define SIO_SPINLOCK14_ACCESS "RO" +#define SIO_SPINLOCK14_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK15 // Description : Reading from a spinlock address will: @@ -1395,7 +1397,7 @@ #define SIO_SPINLOCK15_RESET _u(0x00000000) #define SIO_SPINLOCK15_MSB _u(31) #define SIO_SPINLOCK15_LSB _u(0) -#define SIO_SPINLOCK15_ACCESS "RO" +#define SIO_SPINLOCK15_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK16 // Description : Reading from a spinlock address will: @@ -1411,7 +1413,7 @@ #define SIO_SPINLOCK16_RESET _u(0x00000000) #define SIO_SPINLOCK16_MSB _u(31) #define SIO_SPINLOCK16_LSB _u(0) -#define SIO_SPINLOCK16_ACCESS "RO" +#define SIO_SPINLOCK16_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK17 // Description : Reading from a spinlock address will: @@ -1427,7 +1429,7 @@ #define SIO_SPINLOCK17_RESET _u(0x00000000) #define SIO_SPINLOCK17_MSB _u(31) #define SIO_SPINLOCK17_LSB _u(0) -#define SIO_SPINLOCK17_ACCESS "RO" +#define SIO_SPINLOCK17_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK18 // Description : Reading from a spinlock address will: @@ -1443,7 +1445,7 @@ #define SIO_SPINLOCK18_RESET _u(0x00000000) #define SIO_SPINLOCK18_MSB _u(31) #define SIO_SPINLOCK18_LSB _u(0) -#define SIO_SPINLOCK18_ACCESS "RO" +#define SIO_SPINLOCK18_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK19 // Description : Reading from a spinlock address will: @@ -1459,7 +1461,7 @@ #define SIO_SPINLOCK19_RESET _u(0x00000000) #define SIO_SPINLOCK19_MSB _u(31) #define SIO_SPINLOCK19_LSB _u(0) -#define SIO_SPINLOCK19_ACCESS "RO" +#define SIO_SPINLOCK19_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK20 // Description : Reading from a spinlock address will: @@ -1475,7 +1477,7 @@ #define SIO_SPINLOCK20_RESET _u(0x00000000) #define SIO_SPINLOCK20_MSB _u(31) #define SIO_SPINLOCK20_LSB _u(0) -#define SIO_SPINLOCK20_ACCESS "RO" +#define SIO_SPINLOCK20_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK21 // Description : Reading from a spinlock address will: @@ -1491,7 +1493,7 @@ #define SIO_SPINLOCK21_RESET _u(0x00000000) #define SIO_SPINLOCK21_MSB _u(31) #define SIO_SPINLOCK21_LSB _u(0) -#define SIO_SPINLOCK21_ACCESS "RO" +#define SIO_SPINLOCK21_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK22 // Description : Reading from a spinlock address will: @@ -1507,7 +1509,7 @@ #define SIO_SPINLOCK22_RESET _u(0x00000000) #define SIO_SPINLOCK22_MSB _u(31) #define SIO_SPINLOCK22_LSB _u(0) -#define SIO_SPINLOCK22_ACCESS "RO" +#define SIO_SPINLOCK22_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK23 // Description : Reading from a spinlock address will: @@ -1523,7 +1525,7 @@ #define SIO_SPINLOCK23_RESET _u(0x00000000) #define SIO_SPINLOCK23_MSB _u(31) #define SIO_SPINLOCK23_LSB _u(0) -#define SIO_SPINLOCK23_ACCESS "RO" +#define SIO_SPINLOCK23_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK24 // Description : Reading from a spinlock address will: @@ -1539,7 +1541,7 @@ #define SIO_SPINLOCK24_RESET _u(0x00000000) #define SIO_SPINLOCK24_MSB _u(31) #define SIO_SPINLOCK24_LSB _u(0) -#define SIO_SPINLOCK24_ACCESS "RO" +#define SIO_SPINLOCK24_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK25 // Description : Reading from a spinlock address will: @@ -1555,7 +1557,7 @@ #define SIO_SPINLOCK25_RESET _u(0x00000000) #define SIO_SPINLOCK25_MSB _u(31) #define SIO_SPINLOCK25_LSB _u(0) -#define SIO_SPINLOCK25_ACCESS "RO" +#define SIO_SPINLOCK25_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK26 // Description : Reading from a spinlock address will: @@ -1571,7 +1573,7 @@ #define SIO_SPINLOCK26_RESET _u(0x00000000) #define SIO_SPINLOCK26_MSB _u(31) #define SIO_SPINLOCK26_LSB _u(0) -#define SIO_SPINLOCK26_ACCESS "RO" +#define SIO_SPINLOCK26_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK27 // Description : Reading from a spinlock address will: @@ -1587,7 +1589,7 @@ #define SIO_SPINLOCK27_RESET _u(0x00000000) #define SIO_SPINLOCK27_MSB _u(31) #define SIO_SPINLOCK27_LSB _u(0) -#define SIO_SPINLOCK27_ACCESS "RO" +#define SIO_SPINLOCK27_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK28 // Description : Reading from a spinlock address will: @@ -1603,7 +1605,7 @@ #define SIO_SPINLOCK28_RESET _u(0x00000000) #define SIO_SPINLOCK28_MSB _u(31) #define SIO_SPINLOCK28_LSB _u(0) -#define SIO_SPINLOCK28_ACCESS "RO" +#define SIO_SPINLOCK28_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK29 // Description : Reading from a spinlock address will: @@ -1619,7 +1621,7 @@ #define SIO_SPINLOCK29_RESET _u(0x00000000) #define SIO_SPINLOCK29_MSB _u(31) #define SIO_SPINLOCK29_LSB _u(0) -#define SIO_SPINLOCK29_ACCESS "RO" +#define SIO_SPINLOCK29_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK30 // Description : Reading from a spinlock address will: @@ -1635,7 +1637,7 @@ #define SIO_SPINLOCK30_RESET _u(0x00000000) #define SIO_SPINLOCK30_MSB _u(31) #define SIO_SPINLOCK30_LSB _u(0) -#define SIO_SPINLOCK30_ACCESS "RO" +#define SIO_SPINLOCK30_ACCESS "RW" // ============================================================================= // Register : SIO_SPINLOCK31 // Description : Reading from a spinlock address will: @@ -1651,6 +1653,7 @@ #define SIO_SPINLOCK31_RESET _u(0x00000000) #define SIO_SPINLOCK31_MSB _u(31) #define SIO_SPINLOCK31_LSB _u(0) -#define SIO_SPINLOCK31_ACCESS "RO" +#define SIO_SPINLOCK31_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_SIO_DEFINED +#endif // _HARDWARE_REGS_SIO_H + diff --git a/lib/rp2040/hardware/regs/spi.h b/lib/pico-sdk/rp2040/hardware/regs/spi.h index 816e1502..d9d3b14d 100644 --- a/lib/rp2040/hardware/regs/spi.h +++ b/lib/pico-sdk/rp2040/hardware/regs/spi.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : SPI // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_SPI_DEFINED -#define HARDWARE_REGS_SPI_DEFINED +#ifndef _HARDWARE_REGS_SPI_H +#define _HARDWARE_REGS_SPI_H // ============================================================================= // Register : SPI_SSPCR0 // Description : Control register 0, SSPCR0 on page 3-4 @@ -518,4 +519,5 @@ #define SPI_SSPPCELLID3_SSPPCELLID3_LSB _u(0) #define SPI_SSPPCELLID3_SSPPCELLID3_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_SPI_DEFINED +#endif // _HARDWARE_REGS_SPI_H + diff --git a/lib/rp2040/hardware/regs/ssi.h b/lib/pico-sdk/rp2040/hardware/regs/ssi.h index 67fddc0a..7fe6aa6a 100644 --- a/lib/rp2040/hardware/regs/ssi.h +++ b/lib/pico-sdk/rp2040/hardware/regs/ssi.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -69,8 +71,8 @@ // - Serial clock phase – capture on first edge of serial-clock // directly after reset. // ============================================================================= -#ifndef HARDWARE_REGS_SSI_DEFINED -#define HARDWARE_REGS_SSI_DEFINED +#ifndef _HARDWARE_REGS_SSI_H +#define _HARDWARE_REGS_SSI_H // ============================================================================= // Register : SSI_CTRLR0 // Description : Control register 0 @@ -88,16 +90,15 @@ // ----------------------------------------------------------------------------- // Field : SSI_CTRLR0_SPI_FRF // Description : SPI frame format -// 0x0 -> Standard 1-bit SPI frame format; 1 bit per SCK, -// full-duplex +// 0x0 -> Standard 1-bit SPI frame format; 1 bit per SCK, full-duplex // 0x1 -> Dual-SPI frame format; two bits per SCK, half-duplex // 0x2 -> Quad-SPI frame format; four bits per SCK, half-duplex -#define SSI_CTRLR0_SPI_FRF_RESET _u(0x0) -#define SSI_CTRLR0_SPI_FRF_BITS _u(0x00600000) -#define SSI_CTRLR0_SPI_FRF_MSB _u(22) -#define SSI_CTRLR0_SPI_FRF_LSB _u(21) -#define SSI_CTRLR0_SPI_FRF_ACCESS "RW" -#define SSI_CTRLR0_SPI_FRF_VALUE_STD _u(0x0) +#define SSI_CTRLR0_SPI_FRF_RESET _u(0x0) +#define SSI_CTRLR0_SPI_FRF_BITS _u(0x00600000) +#define SSI_CTRLR0_SPI_FRF_MSB _u(22) +#define SSI_CTRLR0_SPI_FRF_LSB _u(21) +#define SSI_CTRLR0_SPI_FRF_ACCESS "RW" +#define SSI_CTRLR0_SPI_FRF_VALUE_STD _u(0x0) #define SSI_CTRLR0_SPI_FRF_VALUE_DUAL _u(0x1) #define SSI_CTRLR0_SPI_FRF_VALUE_QUAD _u(0x2) // ----------------------------------------------------------------------------- @@ -140,16 +141,15 @@ // 0x0 -> Both transmit and receive // 0x1 -> Transmit only (not for FRF == 0, standard SPI mode) // 0x2 -> Receive only (not for FRF == 0, standard SPI mode) -// 0x3 -> EEPROM read mode (TX then RX; RX starts after control -// data TX'd) -#define SSI_CTRLR0_TMOD_RESET _u(0x0) -#define SSI_CTRLR0_TMOD_BITS _u(0x00000300) -#define SSI_CTRLR0_TMOD_MSB _u(9) -#define SSI_CTRLR0_TMOD_LSB _u(8) -#define SSI_CTRLR0_TMOD_ACCESS "RW" -#define SSI_CTRLR0_TMOD_VALUE_TX_AND_RX _u(0x0) -#define SSI_CTRLR0_TMOD_VALUE_TX_ONLY _u(0x1) -#define SSI_CTRLR0_TMOD_VALUE_RX_ONLY _u(0x2) +// 0x3 -> EEPROM read mode (TX then RX; RX starts after control data TX'd) +#define SSI_CTRLR0_TMOD_RESET _u(0x0) +#define SSI_CTRLR0_TMOD_BITS _u(0x00000300) +#define SSI_CTRLR0_TMOD_MSB _u(9) +#define SSI_CTRLR0_TMOD_LSB _u(8) +#define SSI_CTRLR0_TMOD_ACCESS "RW" +#define SSI_CTRLR0_TMOD_VALUE_TX_AND_RX _u(0x0) +#define SSI_CTRLR0_TMOD_VALUE_TX_ONLY _u(0x1) +#define SSI_CTRLR0_TMOD_VALUE_RX_ONLY _u(0x2) #define SSI_CTRLR0_TMOD_VALUE_EEPROM_READ _u(0x3) // ----------------------------------------------------------------------------- // Field : SSI_CTRLR0_SCPOL @@ -758,15 +758,15 @@ // 0x1 -> 4-bit instruction // 0x2 -> 8-bit instruction // 0x3 -> 16-bit instruction -#define SSI_SPI_CTRLR0_INST_L_RESET _u(0x0) -#define SSI_SPI_CTRLR0_INST_L_BITS _u(0x00000300) -#define SSI_SPI_CTRLR0_INST_L_MSB _u(9) -#define SSI_SPI_CTRLR0_INST_L_LSB _u(8) -#define SSI_SPI_CTRLR0_INST_L_ACCESS "RW" +#define SSI_SPI_CTRLR0_INST_L_RESET _u(0x0) +#define SSI_SPI_CTRLR0_INST_L_BITS _u(0x00000300) +#define SSI_SPI_CTRLR0_INST_L_MSB _u(9) +#define SSI_SPI_CTRLR0_INST_L_LSB _u(8) +#define SSI_SPI_CTRLR0_INST_L_ACCESS "RW" #define SSI_SPI_CTRLR0_INST_L_VALUE_NONE _u(0x0) -#define SSI_SPI_CTRLR0_INST_L_VALUE_4B _u(0x1) -#define SSI_SPI_CTRLR0_INST_L_VALUE_8B _u(0x2) -#define SSI_SPI_CTRLR0_INST_L_VALUE_16B _u(0x3) +#define SSI_SPI_CTRLR0_INST_L_VALUE_4B _u(0x1) +#define SSI_SPI_CTRLR0_INST_L_VALUE_8B _u(0x2) +#define SSI_SPI_CTRLR0_INST_L_VALUE_16B _u(0x3) // ----------------------------------------------------------------------------- // Field : SSI_SPI_CTRLR0_ADDR_L // Description : Address length (0b-60b in 4b increments) @@ -779,15 +779,13 @@ // Field : SSI_SPI_CTRLR0_TRANS_TYPE // Description : Address and instruction transfer format // 0x0 -> Command and address both in standard SPI frame format -// 0x1 -> Command in standard SPI format, address in format -// specified by FRF -// 0x2 -> Command and address both in format specified by FRF -// (e.g. Dual-SPI) -#define SSI_SPI_CTRLR0_TRANS_TYPE_RESET _u(0x0) -#define SSI_SPI_CTRLR0_TRANS_TYPE_BITS _u(0x00000003) -#define SSI_SPI_CTRLR0_TRANS_TYPE_MSB _u(1) -#define SSI_SPI_CTRLR0_TRANS_TYPE_LSB _u(0) -#define SSI_SPI_CTRLR0_TRANS_TYPE_ACCESS "RW" +// 0x1 -> Command in standard SPI format, address in format specified by FRF +// 0x2 -> Command and address both in format specified by FRF (e.g. Dual-SPI) +#define SSI_SPI_CTRLR0_TRANS_TYPE_RESET _u(0x0) +#define SSI_SPI_CTRLR0_TRANS_TYPE_BITS _u(0x00000003) +#define SSI_SPI_CTRLR0_TRANS_TYPE_MSB _u(1) +#define SSI_SPI_CTRLR0_TRANS_TYPE_LSB _u(0) +#define SSI_SPI_CTRLR0_TRANS_TYPE_ACCESS "RW" #define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_1C1A _u(0x0) #define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_1C2A _u(0x1) #define SSI_SPI_CTRLR0_TRANS_TYPE_VALUE_2C2A _u(0x2) @@ -806,4 +804,5 @@ #define SSI_TXD_DRIVE_EDGE_TDE_LSB _u(0) #define SSI_TXD_DRIVE_EDGE_TDE_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_SSI_DEFINED +#endif // _HARDWARE_REGS_SSI_H + diff --git a/lib/rp2040/hardware/regs/syscfg.h b/lib/pico-sdk/rp2040/hardware/regs/syscfg.h index 2bf09e26..96672bb4 100644 --- a/lib/rp2040/hardware/regs/syscfg.h +++ b/lib/pico-sdk/rp2040/hardware/regs/syscfg.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : Register block for various chip control signals // ============================================================================= -#ifndef HARDWARE_REGS_SYSCFG_DEFINED -#define HARDWARE_REGS_SYSCFG_DEFINED +#ifndef _HARDWARE_REGS_SYSCFG_H +#define _HARDWARE_REGS_SYSCFG_H // ============================================================================= // Register : SYSCFG_PROC0_NMI_MASK // Description : Processor core 0 NMI source mask @@ -191,7 +193,6 @@ #define SYSCFG_MEMPOWERDOWN_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_ROM -// Description : None #define SYSCFG_MEMPOWERDOWN_ROM_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_ROM_BITS _u(0x00000080) #define SYSCFG_MEMPOWERDOWN_ROM_MSB _u(7) @@ -199,7 +200,6 @@ #define SYSCFG_MEMPOWERDOWN_ROM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_USB -// Description : None #define SYSCFG_MEMPOWERDOWN_USB_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_USB_BITS _u(0x00000040) #define SYSCFG_MEMPOWERDOWN_USB_MSB _u(6) @@ -207,7 +207,6 @@ #define SYSCFG_MEMPOWERDOWN_USB_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM5 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM5_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM5_BITS _u(0x00000020) #define SYSCFG_MEMPOWERDOWN_SRAM5_MSB _u(5) @@ -215,7 +214,6 @@ #define SYSCFG_MEMPOWERDOWN_SRAM5_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM4 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM4_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM4_BITS _u(0x00000010) #define SYSCFG_MEMPOWERDOWN_SRAM4_MSB _u(4) @@ -223,7 +221,6 @@ #define SYSCFG_MEMPOWERDOWN_SRAM4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM3 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM3_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM3_BITS _u(0x00000008) #define SYSCFG_MEMPOWERDOWN_SRAM3_MSB _u(3) @@ -231,7 +228,6 @@ #define SYSCFG_MEMPOWERDOWN_SRAM3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM2 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM2_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM2_BITS _u(0x00000004) #define SYSCFG_MEMPOWERDOWN_SRAM2_MSB _u(2) @@ -239,7 +235,6 @@ #define SYSCFG_MEMPOWERDOWN_SRAM2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM1 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM1_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM1_BITS _u(0x00000002) #define SYSCFG_MEMPOWERDOWN_SRAM1_MSB _u(1) @@ -247,11 +242,11 @@ #define SYSCFG_MEMPOWERDOWN_SRAM1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : SYSCFG_MEMPOWERDOWN_SRAM0 -// Description : None #define SYSCFG_MEMPOWERDOWN_SRAM0_RESET _u(0x0) #define SYSCFG_MEMPOWERDOWN_SRAM0_BITS _u(0x00000001) #define SYSCFG_MEMPOWERDOWN_SRAM0_MSB _u(0) #define SYSCFG_MEMPOWERDOWN_SRAM0_LSB _u(0) #define SYSCFG_MEMPOWERDOWN_SRAM0_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_SYSCFG_DEFINED +#endif // _HARDWARE_REGS_SYSCFG_H + diff --git a/lib/rp2040/hardware/regs/sysinfo.h b/lib/pico-sdk/rp2040/hardware/regs/sysinfo.h index 2a46658e..e0cf2efa 100644 --- a/lib/rp2040/hardware/regs/sysinfo.h +++ b/lib/pico-sdk/rp2040/hardware/regs/sysinfo.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : SYSINFO // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_SYSINFO_DEFINED -#define HARDWARE_REGS_SYSINFO_DEFINED +#ifndef _HARDWARE_REGS_SYSINFO_H +#define _HARDWARE_REGS_SYSINFO_H // ============================================================================= // Register : SYSINFO_CHIP_ID // Description : JEDEC JEP-106 compliant chip identifier. @@ -19,7 +20,6 @@ #define SYSINFO_CHIP_ID_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : SYSINFO_CHIP_ID_REVISION -// Description : None #define SYSINFO_CHIP_ID_REVISION_RESET "-" #define SYSINFO_CHIP_ID_REVISION_BITS _u(0xf0000000) #define SYSINFO_CHIP_ID_REVISION_MSB _u(31) @@ -27,7 +27,6 @@ #define SYSINFO_CHIP_ID_REVISION_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : SYSINFO_CHIP_ID_PART -// Description : None #define SYSINFO_CHIP_ID_PART_RESET "-" #define SYSINFO_CHIP_ID_PART_BITS _u(0x0ffff000) #define SYSINFO_CHIP_ID_PART_MSB _u(27) @@ -35,7 +34,6 @@ #define SYSINFO_CHIP_ID_PART_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : SYSINFO_CHIP_ID_MANUFACTURER -// Description : None #define SYSINFO_CHIP_ID_MANUFACTURER_RESET "-" #define SYSINFO_CHIP_ID_MANUFACTURER_BITS _u(0x00000fff) #define SYSINFO_CHIP_ID_MANUFACTURER_MSB _u(11) @@ -50,7 +48,6 @@ #define SYSINFO_PLATFORM_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : SYSINFO_PLATFORM_ASIC -// Description : None #define SYSINFO_PLATFORM_ASIC_RESET _u(0x0) #define SYSINFO_PLATFORM_ASIC_BITS _u(0x00000002) #define SYSINFO_PLATFORM_ASIC_MSB _u(1) @@ -58,7 +55,6 @@ #define SYSINFO_PLATFORM_ASIC_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : SYSINFO_PLATFORM_FPGA -// Description : None #define SYSINFO_PLATFORM_FPGA_RESET _u(0x0) #define SYSINFO_PLATFORM_FPGA_BITS _u(0x00000001) #define SYSINFO_PLATFORM_FPGA_MSB _u(0) @@ -67,11 +63,12 @@ // ============================================================================= // Register : SYSINFO_GITREF_RP2040 // Description : Git hash of the chip source. Used to identify chip version. -#define SYSINFO_GITREF_RP2040_OFFSET _u(0x00000040) +#define SYSINFO_GITREF_RP2040_OFFSET _u(0x00000010) #define SYSINFO_GITREF_RP2040_BITS _u(0xffffffff) #define SYSINFO_GITREF_RP2040_RESET "-" #define SYSINFO_GITREF_RP2040_MSB _u(31) #define SYSINFO_GITREF_RP2040_LSB _u(0) #define SYSINFO_GITREF_RP2040_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_SYSINFO_DEFINED +#endif // _HARDWARE_REGS_SYSINFO_H + diff --git a/lib/rp2040/hardware/regs/tbman.h b/lib/pico-sdk/rp2040/hardware/regs/tbman.h index 4f8f6413..49b627c8 100644 --- a/lib/rp2040/hardware/regs/tbman.h +++ b/lib/pico-sdk/rp2040/hardware/regs/tbman.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -10,8 +12,8 @@ // Description : Testbench manager. Allows the programmer to know what // platform their software is running on. // ============================================================================= -#ifndef HARDWARE_REGS_TBMAN_DEFINED -#define HARDWARE_REGS_TBMAN_DEFINED +#ifndef _HARDWARE_REGS_TBMAN_H +#define _HARDWARE_REGS_TBMAN_H // ============================================================================= // Register : TBMAN_PLATFORM // Description : Indicates the type of platform in use @@ -35,4 +37,5 @@ #define TBMAN_PLATFORM_ASIC_LSB _u(0) #define TBMAN_PLATFORM_ASIC_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_TBMAN_DEFINED +#endif // _HARDWARE_REGS_TBMAN_H + diff --git a/lib/rp2040/hardware/regs/timer.h b/lib/pico-sdk/rp2040/hardware/regs/timer.h index c3ef0c5a..7cdcbb30 100644 --- a/lib/rp2040/hardware/regs/timer.h +++ b/lib/pico-sdk/rp2040/hardware/regs/timer.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -25,8 +27,8 @@ // To clear the interrupt write a 1 to the corresponding // alarm_irq // ============================================================================= -#ifndef HARDWARE_REGS_TIMER_DEFINED -#define HARDWARE_REGS_TIMER_DEFINED +#ifndef _HARDWARE_REGS_TIMER_H +#define _HARDWARE_REGS_TIMER_H // ============================================================================= // Register : TIMER_TIMEHW // Description : Write to bits 63:32 of time @@ -184,7 +186,6 @@ #define TIMER_INTR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : TIMER_INTR_ALARM_3 -// Description : None #define TIMER_INTR_ALARM_3_RESET _u(0x0) #define TIMER_INTR_ALARM_3_BITS _u(0x00000008) #define TIMER_INTR_ALARM_3_MSB _u(3) @@ -192,7 +193,6 @@ #define TIMER_INTR_ALARM_3_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : TIMER_INTR_ALARM_2 -// Description : None #define TIMER_INTR_ALARM_2_RESET _u(0x0) #define TIMER_INTR_ALARM_2_BITS _u(0x00000004) #define TIMER_INTR_ALARM_2_MSB _u(2) @@ -200,7 +200,6 @@ #define TIMER_INTR_ALARM_2_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : TIMER_INTR_ALARM_1 -// Description : None #define TIMER_INTR_ALARM_1_RESET _u(0x0) #define TIMER_INTR_ALARM_1_BITS _u(0x00000002) #define TIMER_INTR_ALARM_1_MSB _u(1) @@ -208,7 +207,6 @@ #define TIMER_INTR_ALARM_1_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : TIMER_INTR_ALARM_0 -// Description : None #define TIMER_INTR_ALARM_0_RESET _u(0x0) #define TIMER_INTR_ALARM_0_BITS _u(0x00000001) #define TIMER_INTR_ALARM_0_MSB _u(0) @@ -222,7 +220,6 @@ #define TIMER_INTE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : TIMER_INTE_ALARM_3 -// Description : None #define TIMER_INTE_ALARM_3_RESET _u(0x0) #define TIMER_INTE_ALARM_3_BITS _u(0x00000008) #define TIMER_INTE_ALARM_3_MSB _u(3) @@ -230,7 +227,6 @@ #define TIMER_INTE_ALARM_3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTE_ALARM_2 -// Description : None #define TIMER_INTE_ALARM_2_RESET _u(0x0) #define TIMER_INTE_ALARM_2_BITS _u(0x00000004) #define TIMER_INTE_ALARM_2_MSB _u(2) @@ -238,7 +234,6 @@ #define TIMER_INTE_ALARM_2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTE_ALARM_1 -// Description : None #define TIMER_INTE_ALARM_1_RESET _u(0x0) #define TIMER_INTE_ALARM_1_BITS _u(0x00000002) #define TIMER_INTE_ALARM_1_MSB _u(1) @@ -246,7 +241,6 @@ #define TIMER_INTE_ALARM_1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTE_ALARM_0 -// Description : None #define TIMER_INTE_ALARM_0_RESET _u(0x0) #define TIMER_INTE_ALARM_0_BITS _u(0x00000001) #define TIMER_INTE_ALARM_0_MSB _u(0) @@ -260,7 +254,6 @@ #define TIMER_INTF_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : TIMER_INTF_ALARM_3 -// Description : None #define TIMER_INTF_ALARM_3_RESET _u(0x0) #define TIMER_INTF_ALARM_3_BITS _u(0x00000008) #define TIMER_INTF_ALARM_3_MSB _u(3) @@ -268,7 +261,6 @@ #define TIMER_INTF_ALARM_3_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTF_ALARM_2 -// Description : None #define TIMER_INTF_ALARM_2_RESET _u(0x0) #define TIMER_INTF_ALARM_2_BITS _u(0x00000004) #define TIMER_INTF_ALARM_2_MSB _u(2) @@ -276,7 +268,6 @@ #define TIMER_INTF_ALARM_2_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTF_ALARM_1 -// Description : None #define TIMER_INTF_ALARM_1_RESET _u(0x0) #define TIMER_INTF_ALARM_1_BITS _u(0x00000002) #define TIMER_INTF_ALARM_1_MSB _u(1) @@ -284,7 +275,6 @@ #define TIMER_INTF_ALARM_1_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : TIMER_INTF_ALARM_0 -// Description : None #define TIMER_INTF_ALARM_0_RESET _u(0x0) #define TIMER_INTF_ALARM_0_BITS _u(0x00000001) #define TIMER_INTF_ALARM_0_MSB _u(0) @@ -298,7 +288,6 @@ #define TIMER_INTS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : TIMER_INTS_ALARM_3 -// Description : None #define TIMER_INTS_ALARM_3_RESET _u(0x0) #define TIMER_INTS_ALARM_3_BITS _u(0x00000008) #define TIMER_INTS_ALARM_3_MSB _u(3) @@ -306,7 +295,6 @@ #define TIMER_INTS_ALARM_3_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : TIMER_INTS_ALARM_2 -// Description : None #define TIMER_INTS_ALARM_2_RESET _u(0x0) #define TIMER_INTS_ALARM_2_BITS _u(0x00000004) #define TIMER_INTS_ALARM_2_MSB _u(2) @@ -314,7 +302,6 @@ #define TIMER_INTS_ALARM_2_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : TIMER_INTS_ALARM_1 -// Description : None #define TIMER_INTS_ALARM_1_RESET _u(0x0) #define TIMER_INTS_ALARM_1_BITS _u(0x00000002) #define TIMER_INTS_ALARM_1_MSB _u(1) @@ -322,11 +309,11 @@ #define TIMER_INTS_ALARM_1_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : TIMER_INTS_ALARM_0 -// Description : None #define TIMER_INTS_ALARM_0_RESET _u(0x0) #define TIMER_INTS_ALARM_0_BITS _u(0x00000001) #define TIMER_INTS_ALARM_0_MSB _u(0) #define TIMER_INTS_ALARM_0_LSB _u(0) #define TIMER_INTS_ALARM_0_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_TIMER_DEFINED +#endif // _HARDWARE_REGS_TIMER_H + diff --git a/lib/rp2040/hardware/regs/uart.h b/lib/pico-sdk/rp2040/hardware/regs/uart.h index 409f5982..0f7f17ec 100644 --- a/lib/rp2040/hardware/regs/uart.h +++ b/lib/pico-sdk/rp2040/hardware/regs/uart.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : UART // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_UART_DEFINED -#define HARDWARE_REGS_UART_DEFINED +#ifndef _HARDWARE_REGS_UART_H +#define _HARDWARE_REGS_UART_H // ============================================================================= // Register : UART_UARTDR // Description : Data Register, UARTDR @@ -1145,4 +1146,5 @@ #define UART_UARTPCELLID3_UARTPCELLID3_LSB _u(0) #define UART_UARTPCELLID3_UARTPCELLID3_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_UART_DEFINED +#endif // _HARDWARE_REGS_UART_H + diff --git a/lib/rp2040/hardware/regs/usb.h b/lib/pico-sdk/rp2040/hardware/regs/usb.h index 5461c291..291f65ee 100644 --- a/lib/rp2040/hardware/regs/usb.h +++ b/lib/pico-sdk/rp2040/hardware/regs/usb.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : ahbl // Description : USB FS/LS controller device registers // ============================================================================= -#ifndef HARDWARE_REGS_USB_DEFINED -#define HARDWARE_REGS_USB_DEFINED +#ifndef _HARDWARE_REGS_USB_H +#define _HARDWARE_REGS_USB_H // ============================================================================= // Register : USB_ADDR_ENDP // Description : Device address and endpoint control @@ -660,7 +662,6 @@ #define USB_SOF_WR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_SOF_WR_COUNT -// Description : None #define USB_SOF_WR_COUNT_RESET _u(0x000) #define USB_SOF_WR_COUNT_BITS _u(0x000007ff) #define USB_SOF_WR_COUNT_MSB _u(10) @@ -676,7 +677,6 @@ #define USB_SOF_RD_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_SOF_RD_COUNT -// Description : None #define USB_SOF_RD_COUNT_RESET _u(0x000) #define USB_SOF_RD_COUNT_BITS _u(0x000007ff) #define USB_SOF_RD_COUNT_MSB _u(10) @@ -1072,7 +1072,7 @@ #define USB_INT_EP_CTRL_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_INT_EP_CTRL_INT_EP_ACTIVE -// Description : Host: Enable interrupt endpoint 1 -> 15 +// Description : Host: Enable interrupt endpoint 1 => 15 #define USB_INT_EP_CTRL_INT_EP_ACTIVE_RESET _u(0x0000) #define USB_INT_EP_CTRL_INT_EP_ACTIVE_BITS _u(0x0000fffe) #define USB_INT_EP_CTRL_INT_EP_ACTIVE_MSB _u(15) @@ -1090,7 +1090,6 @@ #define USB_BUFF_STATUS_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP15_OUT -// Description : None #define USB_BUFF_STATUS_EP15_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP15_OUT_BITS _u(0x80000000) #define USB_BUFF_STATUS_EP15_OUT_MSB _u(31) @@ -1098,7 +1097,6 @@ #define USB_BUFF_STATUS_EP15_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP15_IN -// Description : None #define USB_BUFF_STATUS_EP15_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP15_IN_BITS _u(0x40000000) #define USB_BUFF_STATUS_EP15_IN_MSB _u(30) @@ -1106,7 +1104,6 @@ #define USB_BUFF_STATUS_EP15_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP14_OUT -// Description : None #define USB_BUFF_STATUS_EP14_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP14_OUT_BITS _u(0x20000000) #define USB_BUFF_STATUS_EP14_OUT_MSB _u(29) @@ -1114,7 +1111,6 @@ #define USB_BUFF_STATUS_EP14_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP14_IN -// Description : None #define USB_BUFF_STATUS_EP14_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP14_IN_BITS _u(0x10000000) #define USB_BUFF_STATUS_EP14_IN_MSB _u(28) @@ -1122,7 +1118,6 @@ #define USB_BUFF_STATUS_EP14_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP13_OUT -// Description : None #define USB_BUFF_STATUS_EP13_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP13_OUT_BITS _u(0x08000000) #define USB_BUFF_STATUS_EP13_OUT_MSB _u(27) @@ -1130,7 +1125,6 @@ #define USB_BUFF_STATUS_EP13_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP13_IN -// Description : None #define USB_BUFF_STATUS_EP13_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP13_IN_BITS _u(0x04000000) #define USB_BUFF_STATUS_EP13_IN_MSB _u(26) @@ -1138,7 +1132,6 @@ #define USB_BUFF_STATUS_EP13_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP12_OUT -// Description : None #define USB_BUFF_STATUS_EP12_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP12_OUT_BITS _u(0x02000000) #define USB_BUFF_STATUS_EP12_OUT_MSB _u(25) @@ -1146,7 +1139,6 @@ #define USB_BUFF_STATUS_EP12_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP12_IN -// Description : None #define USB_BUFF_STATUS_EP12_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP12_IN_BITS _u(0x01000000) #define USB_BUFF_STATUS_EP12_IN_MSB _u(24) @@ -1154,7 +1146,6 @@ #define USB_BUFF_STATUS_EP12_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP11_OUT -// Description : None #define USB_BUFF_STATUS_EP11_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP11_OUT_BITS _u(0x00800000) #define USB_BUFF_STATUS_EP11_OUT_MSB _u(23) @@ -1162,7 +1153,6 @@ #define USB_BUFF_STATUS_EP11_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP11_IN -// Description : None #define USB_BUFF_STATUS_EP11_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP11_IN_BITS _u(0x00400000) #define USB_BUFF_STATUS_EP11_IN_MSB _u(22) @@ -1170,7 +1160,6 @@ #define USB_BUFF_STATUS_EP11_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP10_OUT -// Description : None #define USB_BUFF_STATUS_EP10_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP10_OUT_BITS _u(0x00200000) #define USB_BUFF_STATUS_EP10_OUT_MSB _u(21) @@ -1178,7 +1167,6 @@ #define USB_BUFF_STATUS_EP10_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP10_IN -// Description : None #define USB_BUFF_STATUS_EP10_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP10_IN_BITS _u(0x00100000) #define USB_BUFF_STATUS_EP10_IN_MSB _u(20) @@ -1186,7 +1174,6 @@ #define USB_BUFF_STATUS_EP10_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP9_OUT -// Description : None #define USB_BUFF_STATUS_EP9_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP9_OUT_BITS _u(0x00080000) #define USB_BUFF_STATUS_EP9_OUT_MSB _u(19) @@ -1194,7 +1181,6 @@ #define USB_BUFF_STATUS_EP9_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP9_IN -// Description : None #define USB_BUFF_STATUS_EP9_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP9_IN_BITS _u(0x00040000) #define USB_BUFF_STATUS_EP9_IN_MSB _u(18) @@ -1202,7 +1188,6 @@ #define USB_BUFF_STATUS_EP9_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP8_OUT -// Description : None #define USB_BUFF_STATUS_EP8_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP8_OUT_BITS _u(0x00020000) #define USB_BUFF_STATUS_EP8_OUT_MSB _u(17) @@ -1210,7 +1195,6 @@ #define USB_BUFF_STATUS_EP8_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP8_IN -// Description : None #define USB_BUFF_STATUS_EP8_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP8_IN_BITS _u(0x00010000) #define USB_BUFF_STATUS_EP8_IN_MSB _u(16) @@ -1218,7 +1202,6 @@ #define USB_BUFF_STATUS_EP8_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP7_OUT -// Description : None #define USB_BUFF_STATUS_EP7_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP7_OUT_BITS _u(0x00008000) #define USB_BUFF_STATUS_EP7_OUT_MSB _u(15) @@ -1226,7 +1209,6 @@ #define USB_BUFF_STATUS_EP7_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP7_IN -// Description : None #define USB_BUFF_STATUS_EP7_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP7_IN_BITS _u(0x00004000) #define USB_BUFF_STATUS_EP7_IN_MSB _u(14) @@ -1234,7 +1216,6 @@ #define USB_BUFF_STATUS_EP7_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP6_OUT -// Description : None #define USB_BUFF_STATUS_EP6_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP6_OUT_BITS _u(0x00002000) #define USB_BUFF_STATUS_EP6_OUT_MSB _u(13) @@ -1242,7 +1223,6 @@ #define USB_BUFF_STATUS_EP6_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP6_IN -// Description : None #define USB_BUFF_STATUS_EP6_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP6_IN_BITS _u(0x00001000) #define USB_BUFF_STATUS_EP6_IN_MSB _u(12) @@ -1250,7 +1230,6 @@ #define USB_BUFF_STATUS_EP6_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP5_OUT -// Description : None #define USB_BUFF_STATUS_EP5_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP5_OUT_BITS _u(0x00000800) #define USB_BUFF_STATUS_EP5_OUT_MSB _u(11) @@ -1258,7 +1237,6 @@ #define USB_BUFF_STATUS_EP5_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP5_IN -// Description : None #define USB_BUFF_STATUS_EP5_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP5_IN_BITS _u(0x00000400) #define USB_BUFF_STATUS_EP5_IN_MSB _u(10) @@ -1266,7 +1244,6 @@ #define USB_BUFF_STATUS_EP5_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP4_OUT -// Description : None #define USB_BUFF_STATUS_EP4_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP4_OUT_BITS _u(0x00000200) #define USB_BUFF_STATUS_EP4_OUT_MSB _u(9) @@ -1274,7 +1251,6 @@ #define USB_BUFF_STATUS_EP4_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP4_IN -// Description : None #define USB_BUFF_STATUS_EP4_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP4_IN_BITS _u(0x00000100) #define USB_BUFF_STATUS_EP4_IN_MSB _u(8) @@ -1282,7 +1258,6 @@ #define USB_BUFF_STATUS_EP4_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP3_OUT -// Description : None #define USB_BUFF_STATUS_EP3_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP3_OUT_BITS _u(0x00000080) #define USB_BUFF_STATUS_EP3_OUT_MSB _u(7) @@ -1290,7 +1265,6 @@ #define USB_BUFF_STATUS_EP3_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP3_IN -// Description : None #define USB_BUFF_STATUS_EP3_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP3_IN_BITS _u(0x00000040) #define USB_BUFF_STATUS_EP3_IN_MSB _u(6) @@ -1298,7 +1272,6 @@ #define USB_BUFF_STATUS_EP3_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP2_OUT -// Description : None #define USB_BUFF_STATUS_EP2_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP2_OUT_BITS _u(0x00000020) #define USB_BUFF_STATUS_EP2_OUT_MSB _u(5) @@ -1306,7 +1279,6 @@ #define USB_BUFF_STATUS_EP2_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP2_IN -// Description : None #define USB_BUFF_STATUS_EP2_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP2_IN_BITS _u(0x00000010) #define USB_BUFF_STATUS_EP2_IN_MSB _u(4) @@ -1314,7 +1286,6 @@ #define USB_BUFF_STATUS_EP2_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP1_OUT -// Description : None #define USB_BUFF_STATUS_EP1_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP1_OUT_BITS _u(0x00000008) #define USB_BUFF_STATUS_EP1_OUT_MSB _u(3) @@ -1322,7 +1293,6 @@ #define USB_BUFF_STATUS_EP1_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP1_IN -// Description : None #define USB_BUFF_STATUS_EP1_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP1_IN_BITS _u(0x00000004) #define USB_BUFF_STATUS_EP1_IN_MSB _u(2) @@ -1330,7 +1300,6 @@ #define USB_BUFF_STATUS_EP1_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP0_OUT -// Description : None #define USB_BUFF_STATUS_EP0_OUT_RESET _u(0x0) #define USB_BUFF_STATUS_EP0_OUT_BITS _u(0x00000002) #define USB_BUFF_STATUS_EP0_OUT_MSB _u(1) @@ -1338,7 +1307,6 @@ #define USB_BUFF_STATUS_EP0_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_BUFF_STATUS_EP0_IN -// Description : None #define USB_BUFF_STATUS_EP0_IN_RESET _u(0x0) #define USB_BUFF_STATUS_EP0_IN_BITS _u(0x00000001) #define USB_BUFF_STATUS_EP0_IN_MSB _u(0) @@ -1355,7 +1323,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_BITS _u(0x80000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_MSB _u(31) @@ -1363,7 +1330,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_BITS _u(0x40000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_MSB _u(30) @@ -1371,7 +1337,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP15_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_BITS _u(0x20000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_MSB _u(29) @@ -1379,7 +1344,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_BITS _u(0x10000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_MSB _u(28) @@ -1387,7 +1351,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP14_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_BITS _u(0x08000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_MSB _u(27) @@ -1395,7 +1358,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_BITS _u(0x04000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_MSB _u(26) @@ -1403,7 +1365,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP13_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_BITS _u(0x02000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_MSB _u(25) @@ -1411,7 +1372,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_BITS _u(0x01000000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_MSB _u(24) @@ -1419,7 +1379,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP12_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_BITS _u(0x00800000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_MSB _u(23) @@ -1427,7 +1386,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_BITS _u(0x00400000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_MSB _u(22) @@ -1435,7 +1393,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP11_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_BITS _u(0x00200000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_MSB _u(21) @@ -1443,7 +1400,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_BITS _u(0x00100000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_MSB _u(20) @@ -1451,7 +1407,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP10_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_BITS _u(0x00080000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_MSB _u(19) @@ -1459,7 +1414,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_BITS _u(0x00040000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_MSB _u(18) @@ -1467,7 +1421,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP9_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_BITS _u(0x00020000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_MSB _u(17) @@ -1475,7 +1428,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_BITS _u(0x00010000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_MSB _u(16) @@ -1483,7 +1435,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP8_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_BITS _u(0x00008000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_MSB _u(15) @@ -1491,7 +1442,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_BITS _u(0x00004000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_MSB _u(14) @@ -1499,7 +1449,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP7_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_BITS _u(0x00002000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_MSB _u(13) @@ -1507,7 +1456,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_BITS _u(0x00001000) #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_MSB _u(12) @@ -1515,7 +1463,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP6_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_BITS _u(0x00000800) #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_MSB _u(11) @@ -1523,7 +1470,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_BITS _u(0x00000400) #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_MSB _u(10) @@ -1531,7 +1477,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP5_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_BITS _u(0x00000200) #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_MSB _u(9) @@ -1539,7 +1484,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_BITS _u(0x00000100) #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_MSB _u(8) @@ -1547,7 +1491,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP4_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_BITS _u(0x00000080) #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_MSB _u(7) @@ -1555,7 +1498,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_BITS _u(0x00000040) #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_MSB _u(6) @@ -1563,7 +1505,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP3_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_BITS _u(0x00000020) #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_MSB _u(5) @@ -1571,7 +1512,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_BITS _u(0x00000010) #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_MSB _u(4) @@ -1579,7 +1519,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP2_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_BITS _u(0x00000008) #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_MSB _u(3) @@ -1587,7 +1526,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_BITS _u(0x00000004) #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_MSB _u(2) @@ -1595,7 +1533,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP1_IN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_BITS _u(0x00000002) #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_MSB _u(1) @@ -1603,7 +1540,6 @@ #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_OUT_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN -// Description : None #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_RESET _u(0x0) #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_BITS _u(0x00000001) #define USB_BUFF_CPU_SHOULD_HANDLE_EP0_IN_MSB _u(0) @@ -1621,7 +1557,6 @@ #define USB_EP_ABORT_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP15_OUT -// Description : None #define USB_EP_ABORT_EP15_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP15_OUT_BITS _u(0x80000000) #define USB_EP_ABORT_EP15_OUT_MSB _u(31) @@ -1629,7 +1564,6 @@ #define USB_EP_ABORT_EP15_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP15_IN -// Description : None #define USB_EP_ABORT_EP15_IN_RESET _u(0x0) #define USB_EP_ABORT_EP15_IN_BITS _u(0x40000000) #define USB_EP_ABORT_EP15_IN_MSB _u(30) @@ -1637,7 +1571,6 @@ #define USB_EP_ABORT_EP15_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP14_OUT -// Description : None #define USB_EP_ABORT_EP14_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP14_OUT_BITS _u(0x20000000) #define USB_EP_ABORT_EP14_OUT_MSB _u(29) @@ -1645,7 +1578,6 @@ #define USB_EP_ABORT_EP14_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP14_IN -// Description : None #define USB_EP_ABORT_EP14_IN_RESET _u(0x0) #define USB_EP_ABORT_EP14_IN_BITS _u(0x10000000) #define USB_EP_ABORT_EP14_IN_MSB _u(28) @@ -1653,7 +1585,6 @@ #define USB_EP_ABORT_EP14_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP13_OUT -// Description : None #define USB_EP_ABORT_EP13_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP13_OUT_BITS _u(0x08000000) #define USB_EP_ABORT_EP13_OUT_MSB _u(27) @@ -1661,7 +1592,6 @@ #define USB_EP_ABORT_EP13_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP13_IN -// Description : None #define USB_EP_ABORT_EP13_IN_RESET _u(0x0) #define USB_EP_ABORT_EP13_IN_BITS _u(0x04000000) #define USB_EP_ABORT_EP13_IN_MSB _u(26) @@ -1669,7 +1599,6 @@ #define USB_EP_ABORT_EP13_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP12_OUT -// Description : None #define USB_EP_ABORT_EP12_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP12_OUT_BITS _u(0x02000000) #define USB_EP_ABORT_EP12_OUT_MSB _u(25) @@ -1677,7 +1606,6 @@ #define USB_EP_ABORT_EP12_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP12_IN -// Description : None #define USB_EP_ABORT_EP12_IN_RESET _u(0x0) #define USB_EP_ABORT_EP12_IN_BITS _u(0x01000000) #define USB_EP_ABORT_EP12_IN_MSB _u(24) @@ -1685,7 +1613,6 @@ #define USB_EP_ABORT_EP12_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP11_OUT -// Description : None #define USB_EP_ABORT_EP11_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP11_OUT_BITS _u(0x00800000) #define USB_EP_ABORT_EP11_OUT_MSB _u(23) @@ -1693,7 +1620,6 @@ #define USB_EP_ABORT_EP11_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP11_IN -// Description : None #define USB_EP_ABORT_EP11_IN_RESET _u(0x0) #define USB_EP_ABORT_EP11_IN_BITS _u(0x00400000) #define USB_EP_ABORT_EP11_IN_MSB _u(22) @@ -1701,7 +1627,6 @@ #define USB_EP_ABORT_EP11_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP10_OUT -// Description : None #define USB_EP_ABORT_EP10_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP10_OUT_BITS _u(0x00200000) #define USB_EP_ABORT_EP10_OUT_MSB _u(21) @@ -1709,7 +1634,6 @@ #define USB_EP_ABORT_EP10_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP10_IN -// Description : None #define USB_EP_ABORT_EP10_IN_RESET _u(0x0) #define USB_EP_ABORT_EP10_IN_BITS _u(0x00100000) #define USB_EP_ABORT_EP10_IN_MSB _u(20) @@ -1717,7 +1641,6 @@ #define USB_EP_ABORT_EP10_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP9_OUT -// Description : None #define USB_EP_ABORT_EP9_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP9_OUT_BITS _u(0x00080000) #define USB_EP_ABORT_EP9_OUT_MSB _u(19) @@ -1725,7 +1648,6 @@ #define USB_EP_ABORT_EP9_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP9_IN -// Description : None #define USB_EP_ABORT_EP9_IN_RESET _u(0x0) #define USB_EP_ABORT_EP9_IN_BITS _u(0x00040000) #define USB_EP_ABORT_EP9_IN_MSB _u(18) @@ -1733,7 +1655,6 @@ #define USB_EP_ABORT_EP9_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP8_OUT -// Description : None #define USB_EP_ABORT_EP8_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP8_OUT_BITS _u(0x00020000) #define USB_EP_ABORT_EP8_OUT_MSB _u(17) @@ -1741,7 +1662,6 @@ #define USB_EP_ABORT_EP8_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP8_IN -// Description : None #define USB_EP_ABORT_EP8_IN_RESET _u(0x0) #define USB_EP_ABORT_EP8_IN_BITS _u(0x00010000) #define USB_EP_ABORT_EP8_IN_MSB _u(16) @@ -1749,7 +1669,6 @@ #define USB_EP_ABORT_EP8_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP7_OUT -// Description : None #define USB_EP_ABORT_EP7_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP7_OUT_BITS _u(0x00008000) #define USB_EP_ABORT_EP7_OUT_MSB _u(15) @@ -1757,7 +1676,6 @@ #define USB_EP_ABORT_EP7_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP7_IN -// Description : None #define USB_EP_ABORT_EP7_IN_RESET _u(0x0) #define USB_EP_ABORT_EP7_IN_BITS _u(0x00004000) #define USB_EP_ABORT_EP7_IN_MSB _u(14) @@ -1765,7 +1683,6 @@ #define USB_EP_ABORT_EP7_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP6_OUT -// Description : None #define USB_EP_ABORT_EP6_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP6_OUT_BITS _u(0x00002000) #define USB_EP_ABORT_EP6_OUT_MSB _u(13) @@ -1773,7 +1690,6 @@ #define USB_EP_ABORT_EP6_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP6_IN -// Description : None #define USB_EP_ABORT_EP6_IN_RESET _u(0x0) #define USB_EP_ABORT_EP6_IN_BITS _u(0x00001000) #define USB_EP_ABORT_EP6_IN_MSB _u(12) @@ -1781,7 +1697,6 @@ #define USB_EP_ABORT_EP6_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP5_OUT -// Description : None #define USB_EP_ABORT_EP5_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP5_OUT_BITS _u(0x00000800) #define USB_EP_ABORT_EP5_OUT_MSB _u(11) @@ -1789,7 +1704,6 @@ #define USB_EP_ABORT_EP5_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP5_IN -// Description : None #define USB_EP_ABORT_EP5_IN_RESET _u(0x0) #define USB_EP_ABORT_EP5_IN_BITS _u(0x00000400) #define USB_EP_ABORT_EP5_IN_MSB _u(10) @@ -1797,7 +1711,6 @@ #define USB_EP_ABORT_EP5_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP4_OUT -// Description : None #define USB_EP_ABORT_EP4_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP4_OUT_BITS _u(0x00000200) #define USB_EP_ABORT_EP4_OUT_MSB _u(9) @@ -1805,7 +1718,6 @@ #define USB_EP_ABORT_EP4_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP4_IN -// Description : None #define USB_EP_ABORT_EP4_IN_RESET _u(0x0) #define USB_EP_ABORT_EP4_IN_BITS _u(0x00000100) #define USB_EP_ABORT_EP4_IN_MSB _u(8) @@ -1813,7 +1725,6 @@ #define USB_EP_ABORT_EP4_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP3_OUT -// Description : None #define USB_EP_ABORT_EP3_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP3_OUT_BITS _u(0x00000080) #define USB_EP_ABORT_EP3_OUT_MSB _u(7) @@ -1821,7 +1732,6 @@ #define USB_EP_ABORT_EP3_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP3_IN -// Description : None #define USB_EP_ABORT_EP3_IN_RESET _u(0x0) #define USB_EP_ABORT_EP3_IN_BITS _u(0x00000040) #define USB_EP_ABORT_EP3_IN_MSB _u(6) @@ -1829,7 +1739,6 @@ #define USB_EP_ABORT_EP3_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP2_OUT -// Description : None #define USB_EP_ABORT_EP2_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP2_OUT_BITS _u(0x00000020) #define USB_EP_ABORT_EP2_OUT_MSB _u(5) @@ -1837,7 +1746,6 @@ #define USB_EP_ABORT_EP2_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP2_IN -// Description : None #define USB_EP_ABORT_EP2_IN_RESET _u(0x0) #define USB_EP_ABORT_EP2_IN_BITS _u(0x00000010) #define USB_EP_ABORT_EP2_IN_MSB _u(4) @@ -1845,7 +1753,6 @@ #define USB_EP_ABORT_EP2_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP1_OUT -// Description : None #define USB_EP_ABORT_EP1_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP1_OUT_BITS _u(0x00000008) #define USB_EP_ABORT_EP1_OUT_MSB _u(3) @@ -1853,7 +1760,6 @@ #define USB_EP_ABORT_EP1_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP1_IN -// Description : None #define USB_EP_ABORT_EP1_IN_RESET _u(0x0) #define USB_EP_ABORT_EP1_IN_BITS _u(0x00000004) #define USB_EP_ABORT_EP1_IN_MSB _u(2) @@ -1861,7 +1767,6 @@ #define USB_EP_ABORT_EP1_IN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP0_OUT -// Description : None #define USB_EP_ABORT_EP0_OUT_RESET _u(0x0) #define USB_EP_ABORT_EP0_OUT_BITS _u(0x00000002) #define USB_EP_ABORT_EP0_OUT_MSB _u(1) @@ -1869,7 +1774,6 @@ #define USB_EP_ABORT_EP0_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_EP0_IN -// Description : None #define USB_EP_ABORT_EP0_IN_RESET _u(0x0) #define USB_EP_ABORT_EP0_IN_BITS _u(0x00000001) #define USB_EP_ABORT_EP0_IN_MSB _u(0) @@ -1885,7 +1789,6 @@ #define USB_EP_ABORT_DONE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP15_OUT -// Description : None #define USB_EP_ABORT_DONE_EP15_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP15_OUT_BITS _u(0x80000000) #define USB_EP_ABORT_DONE_EP15_OUT_MSB _u(31) @@ -1893,7 +1796,6 @@ #define USB_EP_ABORT_DONE_EP15_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP15_IN -// Description : None #define USB_EP_ABORT_DONE_EP15_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP15_IN_BITS _u(0x40000000) #define USB_EP_ABORT_DONE_EP15_IN_MSB _u(30) @@ -1901,7 +1803,6 @@ #define USB_EP_ABORT_DONE_EP15_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP14_OUT -// Description : None #define USB_EP_ABORT_DONE_EP14_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP14_OUT_BITS _u(0x20000000) #define USB_EP_ABORT_DONE_EP14_OUT_MSB _u(29) @@ -1909,7 +1810,6 @@ #define USB_EP_ABORT_DONE_EP14_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP14_IN -// Description : None #define USB_EP_ABORT_DONE_EP14_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP14_IN_BITS _u(0x10000000) #define USB_EP_ABORT_DONE_EP14_IN_MSB _u(28) @@ -1917,7 +1817,6 @@ #define USB_EP_ABORT_DONE_EP14_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP13_OUT -// Description : None #define USB_EP_ABORT_DONE_EP13_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP13_OUT_BITS _u(0x08000000) #define USB_EP_ABORT_DONE_EP13_OUT_MSB _u(27) @@ -1925,7 +1824,6 @@ #define USB_EP_ABORT_DONE_EP13_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP13_IN -// Description : None #define USB_EP_ABORT_DONE_EP13_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP13_IN_BITS _u(0x04000000) #define USB_EP_ABORT_DONE_EP13_IN_MSB _u(26) @@ -1933,7 +1831,6 @@ #define USB_EP_ABORT_DONE_EP13_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP12_OUT -// Description : None #define USB_EP_ABORT_DONE_EP12_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP12_OUT_BITS _u(0x02000000) #define USB_EP_ABORT_DONE_EP12_OUT_MSB _u(25) @@ -1941,7 +1838,6 @@ #define USB_EP_ABORT_DONE_EP12_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP12_IN -// Description : None #define USB_EP_ABORT_DONE_EP12_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP12_IN_BITS _u(0x01000000) #define USB_EP_ABORT_DONE_EP12_IN_MSB _u(24) @@ -1949,7 +1845,6 @@ #define USB_EP_ABORT_DONE_EP12_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP11_OUT -// Description : None #define USB_EP_ABORT_DONE_EP11_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP11_OUT_BITS _u(0x00800000) #define USB_EP_ABORT_DONE_EP11_OUT_MSB _u(23) @@ -1957,7 +1852,6 @@ #define USB_EP_ABORT_DONE_EP11_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP11_IN -// Description : None #define USB_EP_ABORT_DONE_EP11_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP11_IN_BITS _u(0x00400000) #define USB_EP_ABORT_DONE_EP11_IN_MSB _u(22) @@ -1965,7 +1859,6 @@ #define USB_EP_ABORT_DONE_EP11_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP10_OUT -// Description : None #define USB_EP_ABORT_DONE_EP10_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP10_OUT_BITS _u(0x00200000) #define USB_EP_ABORT_DONE_EP10_OUT_MSB _u(21) @@ -1973,7 +1866,6 @@ #define USB_EP_ABORT_DONE_EP10_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP10_IN -// Description : None #define USB_EP_ABORT_DONE_EP10_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP10_IN_BITS _u(0x00100000) #define USB_EP_ABORT_DONE_EP10_IN_MSB _u(20) @@ -1981,7 +1873,6 @@ #define USB_EP_ABORT_DONE_EP10_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP9_OUT -// Description : None #define USB_EP_ABORT_DONE_EP9_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP9_OUT_BITS _u(0x00080000) #define USB_EP_ABORT_DONE_EP9_OUT_MSB _u(19) @@ -1989,7 +1880,6 @@ #define USB_EP_ABORT_DONE_EP9_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP9_IN -// Description : None #define USB_EP_ABORT_DONE_EP9_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP9_IN_BITS _u(0x00040000) #define USB_EP_ABORT_DONE_EP9_IN_MSB _u(18) @@ -1997,7 +1887,6 @@ #define USB_EP_ABORT_DONE_EP9_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP8_OUT -// Description : None #define USB_EP_ABORT_DONE_EP8_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP8_OUT_BITS _u(0x00020000) #define USB_EP_ABORT_DONE_EP8_OUT_MSB _u(17) @@ -2005,7 +1894,6 @@ #define USB_EP_ABORT_DONE_EP8_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP8_IN -// Description : None #define USB_EP_ABORT_DONE_EP8_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP8_IN_BITS _u(0x00010000) #define USB_EP_ABORT_DONE_EP8_IN_MSB _u(16) @@ -2013,7 +1901,6 @@ #define USB_EP_ABORT_DONE_EP8_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP7_OUT -// Description : None #define USB_EP_ABORT_DONE_EP7_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP7_OUT_BITS _u(0x00008000) #define USB_EP_ABORT_DONE_EP7_OUT_MSB _u(15) @@ -2021,7 +1908,6 @@ #define USB_EP_ABORT_DONE_EP7_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP7_IN -// Description : None #define USB_EP_ABORT_DONE_EP7_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP7_IN_BITS _u(0x00004000) #define USB_EP_ABORT_DONE_EP7_IN_MSB _u(14) @@ -2029,7 +1915,6 @@ #define USB_EP_ABORT_DONE_EP7_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP6_OUT -// Description : None #define USB_EP_ABORT_DONE_EP6_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP6_OUT_BITS _u(0x00002000) #define USB_EP_ABORT_DONE_EP6_OUT_MSB _u(13) @@ -2037,7 +1922,6 @@ #define USB_EP_ABORT_DONE_EP6_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP6_IN -// Description : None #define USB_EP_ABORT_DONE_EP6_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP6_IN_BITS _u(0x00001000) #define USB_EP_ABORT_DONE_EP6_IN_MSB _u(12) @@ -2045,7 +1929,6 @@ #define USB_EP_ABORT_DONE_EP6_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP5_OUT -// Description : None #define USB_EP_ABORT_DONE_EP5_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP5_OUT_BITS _u(0x00000800) #define USB_EP_ABORT_DONE_EP5_OUT_MSB _u(11) @@ -2053,7 +1936,6 @@ #define USB_EP_ABORT_DONE_EP5_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP5_IN -// Description : None #define USB_EP_ABORT_DONE_EP5_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP5_IN_BITS _u(0x00000400) #define USB_EP_ABORT_DONE_EP5_IN_MSB _u(10) @@ -2061,7 +1943,6 @@ #define USB_EP_ABORT_DONE_EP5_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP4_OUT -// Description : None #define USB_EP_ABORT_DONE_EP4_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP4_OUT_BITS _u(0x00000200) #define USB_EP_ABORT_DONE_EP4_OUT_MSB _u(9) @@ -2069,7 +1950,6 @@ #define USB_EP_ABORT_DONE_EP4_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP4_IN -// Description : None #define USB_EP_ABORT_DONE_EP4_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP4_IN_BITS _u(0x00000100) #define USB_EP_ABORT_DONE_EP4_IN_MSB _u(8) @@ -2077,7 +1957,6 @@ #define USB_EP_ABORT_DONE_EP4_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP3_OUT -// Description : None #define USB_EP_ABORT_DONE_EP3_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP3_OUT_BITS _u(0x00000080) #define USB_EP_ABORT_DONE_EP3_OUT_MSB _u(7) @@ -2085,7 +1964,6 @@ #define USB_EP_ABORT_DONE_EP3_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP3_IN -// Description : None #define USB_EP_ABORT_DONE_EP3_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP3_IN_BITS _u(0x00000040) #define USB_EP_ABORT_DONE_EP3_IN_MSB _u(6) @@ -2093,7 +1971,6 @@ #define USB_EP_ABORT_DONE_EP3_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP2_OUT -// Description : None #define USB_EP_ABORT_DONE_EP2_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP2_OUT_BITS _u(0x00000020) #define USB_EP_ABORT_DONE_EP2_OUT_MSB _u(5) @@ -2101,7 +1978,6 @@ #define USB_EP_ABORT_DONE_EP2_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP2_IN -// Description : None #define USB_EP_ABORT_DONE_EP2_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP2_IN_BITS _u(0x00000010) #define USB_EP_ABORT_DONE_EP2_IN_MSB _u(4) @@ -2109,7 +1985,6 @@ #define USB_EP_ABORT_DONE_EP2_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP1_OUT -// Description : None #define USB_EP_ABORT_DONE_EP1_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP1_OUT_BITS _u(0x00000008) #define USB_EP_ABORT_DONE_EP1_OUT_MSB _u(3) @@ -2117,7 +1992,6 @@ #define USB_EP_ABORT_DONE_EP1_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP1_IN -// Description : None #define USB_EP_ABORT_DONE_EP1_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP1_IN_BITS _u(0x00000004) #define USB_EP_ABORT_DONE_EP1_IN_MSB _u(2) @@ -2125,7 +1999,6 @@ #define USB_EP_ABORT_DONE_EP1_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP0_OUT -// Description : None #define USB_EP_ABORT_DONE_EP0_OUT_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP0_OUT_BITS _u(0x00000002) #define USB_EP_ABORT_DONE_EP0_OUT_MSB _u(1) @@ -2133,7 +2006,6 @@ #define USB_EP_ABORT_DONE_EP0_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_ABORT_DONE_EP0_IN -// Description : None #define USB_EP_ABORT_DONE_EP0_IN_RESET _u(0x0) #define USB_EP_ABORT_DONE_EP0_IN_BITS _u(0x00000001) #define USB_EP_ABORT_DONE_EP0_IN_MSB _u(0) @@ -2151,7 +2023,6 @@ #define USB_EP_STALL_ARM_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_EP_STALL_ARM_EP0_OUT -// Description : None #define USB_EP_STALL_ARM_EP0_OUT_RESET _u(0x0) #define USB_EP_STALL_ARM_EP0_OUT_BITS _u(0x00000002) #define USB_EP_STALL_ARM_EP0_OUT_MSB _u(1) @@ -2159,7 +2030,6 @@ #define USB_EP_STALL_ARM_EP0_OUT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_EP_STALL_ARM_EP0_IN -// Description : None #define USB_EP_STALL_ARM_EP0_IN_RESET _u(0x0) #define USB_EP_STALL_ARM_EP0_IN_BITS _u(0x00000001) #define USB_EP_STALL_ARM_EP0_IN_MSB _u(0) @@ -2198,7 +2068,6 @@ #define USB_EP_STATUS_STALL_NAK_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP15_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP15_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP15_OUT_BITS _u(0x80000000) #define USB_EP_STATUS_STALL_NAK_EP15_OUT_MSB _u(31) @@ -2206,7 +2075,6 @@ #define USB_EP_STATUS_STALL_NAK_EP15_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP15_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP15_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP15_IN_BITS _u(0x40000000) #define USB_EP_STATUS_STALL_NAK_EP15_IN_MSB _u(30) @@ -2214,7 +2082,6 @@ #define USB_EP_STATUS_STALL_NAK_EP15_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP14_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP14_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP14_OUT_BITS _u(0x20000000) #define USB_EP_STATUS_STALL_NAK_EP14_OUT_MSB _u(29) @@ -2222,7 +2089,6 @@ #define USB_EP_STATUS_STALL_NAK_EP14_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP14_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP14_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP14_IN_BITS _u(0x10000000) #define USB_EP_STATUS_STALL_NAK_EP14_IN_MSB _u(28) @@ -2230,7 +2096,6 @@ #define USB_EP_STATUS_STALL_NAK_EP14_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP13_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP13_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP13_OUT_BITS _u(0x08000000) #define USB_EP_STATUS_STALL_NAK_EP13_OUT_MSB _u(27) @@ -2238,7 +2103,6 @@ #define USB_EP_STATUS_STALL_NAK_EP13_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP13_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP13_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP13_IN_BITS _u(0x04000000) #define USB_EP_STATUS_STALL_NAK_EP13_IN_MSB _u(26) @@ -2246,7 +2110,6 @@ #define USB_EP_STATUS_STALL_NAK_EP13_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP12_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP12_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP12_OUT_BITS _u(0x02000000) #define USB_EP_STATUS_STALL_NAK_EP12_OUT_MSB _u(25) @@ -2254,7 +2117,6 @@ #define USB_EP_STATUS_STALL_NAK_EP12_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP12_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP12_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP12_IN_BITS _u(0x01000000) #define USB_EP_STATUS_STALL_NAK_EP12_IN_MSB _u(24) @@ -2262,7 +2124,6 @@ #define USB_EP_STATUS_STALL_NAK_EP12_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP11_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP11_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP11_OUT_BITS _u(0x00800000) #define USB_EP_STATUS_STALL_NAK_EP11_OUT_MSB _u(23) @@ -2270,7 +2131,6 @@ #define USB_EP_STATUS_STALL_NAK_EP11_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP11_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP11_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP11_IN_BITS _u(0x00400000) #define USB_EP_STATUS_STALL_NAK_EP11_IN_MSB _u(22) @@ -2278,7 +2138,6 @@ #define USB_EP_STATUS_STALL_NAK_EP11_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP10_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP10_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP10_OUT_BITS _u(0x00200000) #define USB_EP_STATUS_STALL_NAK_EP10_OUT_MSB _u(21) @@ -2286,7 +2145,6 @@ #define USB_EP_STATUS_STALL_NAK_EP10_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP10_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP10_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP10_IN_BITS _u(0x00100000) #define USB_EP_STATUS_STALL_NAK_EP10_IN_MSB _u(20) @@ -2294,7 +2152,6 @@ #define USB_EP_STATUS_STALL_NAK_EP10_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP9_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP9_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP9_OUT_BITS _u(0x00080000) #define USB_EP_STATUS_STALL_NAK_EP9_OUT_MSB _u(19) @@ -2302,7 +2159,6 @@ #define USB_EP_STATUS_STALL_NAK_EP9_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP9_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP9_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP9_IN_BITS _u(0x00040000) #define USB_EP_STATUS_STALL_NAK_EP9_IN_MSB _u(18) @@ -2310,7 +2166,6 @@ #define USB_EP_STATUS_STALL_NAK_EP9_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP8_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP8_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP8_OUT_BITS _u(0x00020000) #define USB_EP_STATUS_STALL_NAK_EP8_OUT_MSB _u(17) @@ -2318,7 +2173,6 @@ #define USB_EP_STATUS_STALL_NAK_EP8_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP8_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP8_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP8_IN_BITS _u(0x00010000) #define USB_EP_STATUS_STALL_NAK_EP8_IN_MSB _u(16) @@ -2326,7 +2180,6 @@ #define USB_EP_STATUS_STALL_NAK_EP8_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP7_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP7_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP7_OUT_BITS _u(0x00008000) #define USB_EP_STATUS_STALL_NAK_EP7_OUT_MSB _u(15) @@ -2334,7 +2187,6 @@ #define USB_EP_STATUS_STALL_NAK_EP7_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP7_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP7_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP7_IN_BITS _u(0x00004000) #define USB_EP_STATUS_STALL_NAK_EP7_IN_MSB _u(14) @@ -2342,7 +2194,6 @@ #define USB_EP_STATUS_STALL_NAK_EP7_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP6_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP6_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP6_OUT_BITS _u(0x00002000) #define USB_EP_STATUS_STALL_NAK_EP6_OUT_MSB _u(13) @@ -2350,7 +2201,6 @@ #define USB_EP_STATUS_STALL_NAK_EP6_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP6_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP6_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP6_IN_BITS _u(0x00001000) #define USB_EP_STATUS_STALL_NAK_EP6_IN_MSB _u(12) @@ -2358,7 +2208,6 @@ #define USB_EP_STATUS_STALL_NAK_EP6_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP5_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP5_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP5_OUT_BITS _u(0x00000800) #define USB_EP_STATUS_STALL_NAK_EP5_OUT_MSB _u(11) @@ -2366,7 +2215,6 @@ #define USB_EP_STATUS_STALL_NAK_EP5_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP5_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP5_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP5_IN_BITS _u(0x00000400) #define USB_EP_STATUS_STALL_NAK_EP5_IN_MSB _u(10) @@ -2374,7 +2222,6 @@ #define USB_EP_STATUS_STALL_NAK_EP5_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP4_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP4_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP4_OUT_BITS _u(0x00000200) #define USB_EP_STATUS_STALL_NAK_EP4_OUT_MSB _u(9) @@ -2382,7 +2229,6 @@ #define USB_EP_STATUS_STALL_NAK_EP4_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP4_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP4_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP4_IN_BITS _u(0x00000100) #define USB_EP_STATUS_STALL_NAK_EP4_IN_MSB _u(8) @@ -2390,7 +2236,6 @@ #define USB_EP_STATUS_STALL_NAK_EP4_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP3_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP3_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP3_OUT_BITS _u(0x00000080) #define USB_EP_STATUS_STALL_NAK_EP3_OUT_MSB _u(7) @@ -2398,7 +2243,6 @@ #define USB_EP_STATUS_STALL_NAK_EP3_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP3_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP3_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP3_IN_BITS _u(0x00000040) #define USB_EP_STATUS_STALL_NAK_EP3_IN_MSB _u(6) @@ -2406,7 +2250,6 @@ #define USB_EP_STATUS_STALL_NAK_EP3_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP2_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP2_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP2_OUT_BITS _u(0x00000020) #define USB_EP_STATUS_STALL_NAK_EP2_OUT_MSB _u(5) @@ -2414,7 +2257,6 @@ #define USB_EP_STATUS_STALL_NAK_EP2_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP2_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP2_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP2_IN_BITS _u(0x00000010) #define USB_EP_STATUS_STALL_NAK_EP2_IN_MSB _u(4) @@ -2422,7 +2264,6 @@ #define USB_EP_STATUS_STALL_NAK_EP2_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP1_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP1_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP1_OUT_BITS _u(0x00000008) #define USB_EP_STATUS_STALL_NAK_EP1_OUT_MSB _u(3) @@ -2430,7 +2271,6 @@ #define USB_EP_STATUS_STALL_NAK_EP1_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP1_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP1_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP1_IN_BITS _u(0x00000004) #define USB_EP_STATUS_STALL_NAK_EP1_IN_MSB _u(2) @@ -2438,7 +2278,6 @@ #define USB_EP_STATUS_STALL_NAK_EP1_IN_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP0_OUT -// Description : None #define USB_EP_STATUS_STALL_NAK_EP0_OUT_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP0_OUT_BITS _u(0x00000002) #define USB_EP_STATUS_STALL_NAK_EP0_OUT_MSB _u(1) @@ -2446,7 +2285,6 @@ #define USB_EP_STATUS_STALL_NAK_EP0_OUT_ACCESS "WC" // ----------------------------------------------------------------------------- // Field : USB_EP_STATUS_STALL_NAK_EP0_IN -// Description : None #define USB_EP_STATUS_STALL_NAK_EP0_IN_RESET _u(0x0) #define USB_EP_STATUS_STALL_NAK_EP0_IN_BITS _u(0x00000001) #define USB_EP_STATUS_STALL_NAK_EP0_IN_MSB _u(0) @@ -2461,7 +2299,6 @@ #define USB_USB_MUXING_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_USB_MUXING_SOFTCON -// Description : None #define USB_USB_MUXING_SOFTCON_RESET _u(0x0) #define USB_USB_MUXING_SOFTCON_BITS _u(0x00000008) #define USB_USB_MUXING_SOFTCON_MSB _u(3) @@ -2469,7 +2306,6 @@ #define USB_USB_MUXING_SOFTCON_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_MUXING_TO_DIGITAL_PAD -// Description : None #define USB_USB_MUXING_TO_DIGITAL_PAD_RESET _u(0x0) #define USB_USB_MUXING_TO_DIGITAL_PAD_BITS _u(0x00000004) #define USB_USB_MUXING_TO_DIGITAL_PAD_MSB _u(2) @@ -2477,7 +2313,6 @@ #define USB_USB_MUXING_TO_DIGITAL_PAD_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_MUXING_TO_EXTPHY -// Description : None #define USB_USB_MUXING_TO_EXTPHY_RESET _u(0x0) #define USB_USB_MUXING_TO_EXTPHY_BITS _u(0x00000002) #define USB_USB_MUXING_TO_EXTPHY_MSB _u(1) @@ -2485,7 +2320,6 @@ #define USB_USB_MUXING_TO_EXTPHY_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_MUXING_TO_PHY -// Description : None #define USB_USB_MUXING_TO_PHY_RESET _u(0x0) #define USB_USB_MUXING_TO_PHY_BITS _u(0x00000001) #define USB_USB_MUXING_TO_PHY_MSB _u(0) @@ -2495,14 +2329,13 @@ // Register : USB_USB_PWR // Description : Overrides for the power signals in the event that the VBUS // signals are not hooked up to GPIO. Set the value of the -// override and then the override enable to switch over to the +// override and then the override enable so switch over to the // override value. #define USB_USB_PWR_OFFSET _u(0x00000078) #define USB_USB_PWR_BITS _u(0x0000003f) #define USB_USB_PWR_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_OVERCURR_DETECT_EN -// Description : None #define USB_USB_PWR_OVERCURR_DETECT_EN_RESET _u(0x0) #define USB_USB_PWR_OVERCURR_DETECT_EN_BITS _u(0x00000020) #define USB_USB_PWR_OVERCURR_DETECT_EN_MSB _u(5) @@ -2510,7 +2343,6 @@ #define USB_USB_PWR_OVERCURR_DETECT_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_OVERCURR_DETECT -// Description : None #define USB_USB_PWR_OVERCURR_DETECT_RESET _u(0x0) #define USB_USB_PWR_OVERCURR_DETECT_BITS _u(0x00000010) #define USB_USB_PWR_OVERCURR_DETECT_MSB _u(4) @@ -2518,7 +2350,6 @@ #define USB_USB_PWR_OVERCURR_DETECT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN -// Description : None #define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_RESET _u(0x0) #define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_BITS _u(0x00000008) #define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_MSB _u(3) @@ -2526,7 +2357,6 @@ #define USB_USB_PWR_VBUS_DETECT_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_VBUS_DETECT -// Description : None #define USB_USB_PWR_VBUS_DETECT_RESET _u(0x0) #define USB_USB_PWR_VBUS_DETECT_BITS _u(0x00000004) #define USB_USB_PWR_VBUS_DETECT_MSB _u(2) @@ -2534,7 +2364,6 @@ #define USB_USB_PWR_VBUS_DETECT_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_VBUS_EN_OVERRIDE_EN -// Description : None #define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_RESET _u(0x0) #define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_BITS _u(0x00000002) #define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_MSB _u(1) @@ -2542,7 +2371,6 @@ #define USB_USB_PWR_VBUS_EN_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USB_PWR_VBUS_EN -// Description : None #define USB_USB_PWR_VBUS_EN_RESET _u(0x0) #define USB_USB_PWR_VBUS_EN_BITS _u(0x00000001) #define USB_USB_PWR_VBUS_EN_MSB _u(0) @@ -2550,15 +2378,17 @@ #define USB_USB_PWR_VBUS_EN_ACCESS "RW" // ============================================================================= // Register : USB_USBPHY_DIRECT -// Description : This register allows for direct control of the USB phy. Use in -// conjunction with usbphy_direct_override register to enable each -// override bit. +// Description : Note that most functions are driven directly from usb_fsls +// controller. This register allows more detailed control/status +// from the USB PHY. Useful for debug but not expected to be used +// in normal operation +// Use in conjunction with usbphy_direct_override register #define USB_USBPHY_DIRECT_OFFSET _u(0x0000007c) #define USB_USBPHY_DIRECT_BITS _u(0x007fff77) #define USB_USBPHY_DIRECT_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DM_OVV -// Description : DM over voltage +// Description : Status bit from USB PHY #define USB_USBPHY_DIRECT_DM_OVV_RESET _u(0x0) #define USB_USBPHY_DIRECT_DM_OVV_BITS _u(0x00400000) #define USB_USBPHY_DIRECT_DM_OVV_MSB _u(22) @@ -2566,7 +2396,7 @@ #define USB_USBPHY_DIRECT_DM_OVV_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DP_OVV -// Description : DP over voltage +// Description : Status bit from USB PHY #define USB_USBPHY_DIRECT_DP_OVV_RESET _u(0x0) #define USB_USBPHY_DIRECT_DP_OVV_BITS _u(0x00200000) #define USB_USBPHY_DIRECT_DP_OVV_MSB _u(21) @@ -2574,7 +2404,7 @@ #define USB_USBPHY_DIRECT_DP_OVV_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DM_OVCN -// Description : DM overcurrent +// Description : Status bit from USB PHY #define USB_USBPHY_DIRECT_DM_OVCN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DM_OVCN_BITS _u(0x00100000) #define USB_USBPHY_DIRECT_DM_OVCN_MSB _u(20) @@ -2582,7 +2412,7 @@ #define USB_USBPHY_DIRECT_DM_OVCN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DP_OVCN -// Description : DP overcurrent +// Description : Status bit from USB PHY #define USB_USBPHY_DIRECT_DP_OVCN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DP_OVCN_BITS _u(0x00080000) #define USB_USBPHY_DIRECT_DP_OVCN_MSB _u(19) @@ -2590,7 +2420,8 @@ #define USB_USBPHY_DIRECT_DP_OVCN_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_RX_DM -// Description : DPM pin state +// Description : Status bit from USB PHY +// DPM pin state #define USB_USBPHY_DIRECT_RX_DM_RESET _u(0x0) #define USB_USBPHY_DIRECT_RX_DM_BITS _u(0x00040000) #define USB_USBPHY_DIRECT_RX_DM_MSB _u(18) @@ -2598,7 +2429,8 @@ #define USB_USBPHY_DIRECT_RX_DM_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_RX_DP -// Description : DPP pin state +// Description : Status bit from USB PHY +// DPP pin state #define USB_USBPHY_DIRECT_RX_DP_RESET _u(0x0) #define USB_USBPHY_DIRECT_RX_DP_BITS _u(0x00020000) #define USB_USBPHY_DIRECT_RX_DP_MSB _u(17) @@ -2606,7 +2438,8 @@ #define USB_USBPHY_DIRECT_RX_DP_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_RX_DD -// Description : Differential RX +// Description : Status bit from USB PHY +// RX Diff data #define USB_USBPHY_DIRECT_RX_DD_RESET _u(0x0) #define USB_USBPHY_DIRECT_RX_DD_BITS _u(0x00010000) #define USB_USBPHY_DIRECT_RX_DD_MSB _u(16) @@ -2614,9 +2447,6 @@ #define USB_USBPHY_DIRECT_RX_DD_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_DIFFMODE -// Description : TX_DIFFMODE=0: Single ended mode -// TX_DIFFMODE=1: Differential drive mode (TX_DM, TX_DM_OE -// ignored) #define USB_USBPHY_DIRECT_TX_DIFFMODE_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_DIFFMODE_BITS _u(0x00008000) #define USB_USBPHY_DIRECT_TX_DIFFMODE_MSB _u(15) @@ -2624,8 +2454,6 @@ #define USB_USBPHY_DIRECT_TX_DIFFMODE_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_FSSLEW -// Description : TX_FSSLEW=0: Low speed slew rate -// TX_FSSLEW=1: Full speed slew rate #define USB_USBPHY_DIRECT_TX_FSSLEW_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_FSSLEW_BITS _u(0x00004000) #define USB_USBPHY_DIRECT_TX_FSSLEW_MSB _u(14) @@ -2633,8 +2461,6 @@ #define USB_USBPHY_DIRECT_TX_FSSLEW_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_PD -// Description : TX power down override (if override enable is set). 1 = powered -// down. #define USB_USBPHY_DIRECT_TX_PD_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_PD_BITS _u(0x00002000) #define USB_USBPHY_DIRECT_TX_PD_MSB _u(13) @@ -2642,8 +2468,6 @@ #define USB_USBPHY_DIRECT_TX_PD_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_RX_PD -// Description : RX power down override (if override enable is set). 1 = powered -// down. #define USB_USBPHY_DIRECT_RX_PD_RESET _u(0x0) #define USB_USBPHY_DIRECT_RX_PD_BITS _u(0x00001000) #define USB_USBPHY_DIRECT_RX_PD_MSB _u(12) @@ -2651,8 +2475,11 @@ #define USB_USBPHY_DIRECT_RX_PD_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_DM -// Description : Output data. TX_DIFFMODE=1, Ignored -// TX_DIFFMODE=0, Drives DPM only. TX_DM_OE=1 to enable drive. +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// TX_SEMODE=0, Ignored +// TX_SEMODE=1, Drives DPM only. TX_DM_OE=1 to enable drive. // DPM=TX_DM #define USB_USBPHY_DIRECT_TX_DM_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_DM_BITS _u(0x00000800) @@ -2661,9 +2488,12 @@ #define USB_USBPHY_DIRECT_TX_DM_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_DP -// Description : Output data. If TX_DIFFMODE=1, Drives DPP/DPM diff pair. -// TX_DP_OE=1 to enable drive. DPP=TX_DP, DPM=~TX_DP -// If TX_DIFFMODE=0, Drives DPP only. TX_DP_OE=1 to enable drive. +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// TX_SEMODE=0, Drives DPP/DPM diff pair. TX_DP_OE=1 to enable +// drive. DPP=TX_DP, DPM=~TX_DP +// TX_SEMODE=1, Drives DPP only. TX_DP_OE=1 to enable drive. // DPP=TX_DP #define USB_USBPHY_DIRECT_TX_DP_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_DP_BITS _u(0x00000400) @@ -2672,9 +2502,12 @@ #define USB_USBPHY_DIRECT_TX_DP_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_DM_OE -// Description : Output enable. If TX_DIFFMODE=1, Ignored. -// If TX_DIFFMODE=0, OE for DPM only. 0 - DPM in Hi-Z state; 1 - -// DPM driving +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// TX_SEMODE=0, Ignored. +// TX_SEMODE=1, OE for DPM only. 0 - DPM in Hi-Z state; 1 - DPM +// driving #define USB_USBPHY_DIRECT_TX_DM_OE_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_DM_OE_BITS _u(0x00000200) #define USB_USBPHY_DIRECT_TX_DM_OE_MSB _u(9) @@ -2682,10 +2515,13 @@ #define USB_USBPHY_DIRECT_TX_DM_OE_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_TX_DP_OE -// Description : Output enable. If TX_DIFFMODE=1, OE for DPP/DPM diff pair. 0 - -// DPP/DPM in Hi-Z state; 1 - DPP/DPM driving -// If TX_DIFFMODE=0, OE for DPP only. 0 - DPP in Hi-Z state; 1 - -// DPP driving +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// TX_SEMODE=0, OE for DPP/DPM diff pair. 0 - DPP/DPM in Hi-Z +// state; 1 - DPP/DPM driving +// TX_SEMODE=1, OE for DPP only. 0 - DPP in Hi-Z state; 1 - DPP +// driving #define USB_USBPHY_DIRECT_TX_DP_OE_RESET _u(0x0) #define USB_USBPHY_DIRECT_TX_DP_OE_BITS _u(0x00000100) #define USB_USBPHY_DIRECT_TX_DP_OE_MSB _u(8) @@ -2693,7 +2529,10 @@ #define USB_USBPHY_DIRECT_TX_DP_OE_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DM_PULLDN_EN -// Description : DM pull down enable +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// 1 - Enable Rpd on DPM #define USB_USBPHY_DIRECT_DM_PULLDN_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DM_PULLDN_EN_BITS _u(0x00000040) #define USB_USBPHY_DIRECT_DM_PULLDN_EN_MSB _u(6) @@ -2701,7 +2540,10 @@ #define USB_USBPHY_DIRECT_DM_PULLDN_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DM_PULLUP_EN -// Description : DM pull up enable +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// 1 - Enable Rpu on DPM #define USB_USBPHY_DIRECT_DM_PULLUP_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DM_PULLUP_EN_BITS _u(0x00000020) #define USB_USBPHY_DIRECT_DM_PULLUP_EN_MSB _u(5) @@ -2709,8 +2551,8 @@ #define USB_USBPHY_DIRECT_DM_PULLUP_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DM_PULLUP_HISEL -// Description : Enable the second DM pull up resistor. 0 - Pull = Rpu2; 1 - -// Pull = Rpu1 + Rpu2 +// Description : when dm_pullup_en is set high, this enables second resistor. 0 +// - Pull = Rpu2; 1 - Pull = Rpu1 + Rpu2 #define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_RESET _u(0x0) #define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_BITS _u(0x00000010) #define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_MSB _u(4) @@ -2718,7 +2560,10 @@ #define USB_USBPHY_DIRECT_DM_PULLUP_HISEL_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DP_PULLDN_EN -// Description : DP pull down enable +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller +// 1 - Enable Rpd on DPP #define USB_USBPHY_DIRECT_DP_PULLDN_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DP_PULLDN_EN_BITS _u(0x00000004) #define USB_USBPHY_DIRECT_DP_PULLDN_EN_MSB _u(2) @@ -2726,7 +2571,9 @@ #define USB_USBPHY_DIRECT_DP_PULLDN_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DP_PULLUP_EN -// Description : DP pull up enable +// Description : Value to drive to USB PHY when override enable is set (which +// will override the default value or value driven from USB +// controller #define USB_USBPHY_DIRECT_DP_PULLUP_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_DP_PULLUP_EN_BITS _u(0x00000002) #define USB_USBPHY_DIRECT_DP_PULLUP_EN_MSB _u(1) @@ -2734,8 +2581,8 @@ #define USB_USBPHY_DIRECT_DP_PULLUP_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_DP_PULLUP_HISEL -// Description : Enable the second DP pull up resistor. 0 - Pull = Rpu2; 1 - -// Pull = Rpu1 + Rpu2 +// Description : when dp_pullup_en is set high, this enables second resistor. 0 +// - Pull = Rpu2; 1 - Pull = Rpu1 + Rpu2 #define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_RESET _u(0x0) #define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_BITS _u(0x00000001) #define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_MSB _u(0) @@ -2743,13 +2590,11 @@ #define USB_USBPHY_DIRECT_DP_PULLUP_HISEL_ACCESS "RW" // ============================================================================= // Register : USB_USBPHY_DIRECT_OVERRIDE -// Description : Override enable for each control in usbphy_direct #define USB_USBPHY_DIRECT_OVERRIDE_OFFSET _u(0x00000080) #define USB_USBPHY_DIRECT_OVERRIDE_BITS _u(0x00009fff) #define USB_USBPHY_DIRECT_OVERRIDE_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_BITS _u(0x00008000) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_MSB _u(15) @@ -2757,7 +2602,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_DIFFMODE_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_BITS _u(0x00001000) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_MSB _u(12) @@ -2765,7 +2609,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_BITS _u(0x00000800) #define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_MSB _u(11) @@ -2773,7 +2616,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_FSSLEW_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_BITS _u(0x00000400) #define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_MSB _u(10) @@ -2781,7 +2623,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_PD_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_BITS _u(0x00000200) #define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_MSB _u(9) @@ -2789,7 +2630,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_RX_PD_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_BITS _u(0x00000100) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_MSB _u(8) @@ -2797,7 +2639,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_BITS _u(0x00000080) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_MSB _u(7) @@ -2805,7 +2648,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_BITS _u(0x00000040) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_MSB _u(6) @@ -2813,7 +2657,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_DM_OE_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_BITS _u(0x00000020) #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_MSB _u(5) @@ -2821,7 +2666,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_TX_DP_OE_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_BITS _u(0x00000010) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_MSB _u(4) @@ -2829,7 +2675,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLDN_EN_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_BITS _u(0x00000008) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_MSB _u(3) @@ -2837,7 +2684,8 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLDN_EN_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN -// Description : None +// Description : Override default value or value driven from USB Controller to +// PHY #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_BITS _u(0x00000004) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_MSB _u(2) @@ -2845,7 +2693,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_EN_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_BITS _u(0x00000002) #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_MSB _u(1) @@ -2853,7 +2700,6 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DM_PULLUP_HISEL_OVERRIDE_EN_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN -// Description : None #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_RESET _u(0x0) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_BITS _u(0x00000001) #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_MSB _u(0) @@ -2861,7 +2707,10 @@ #define USB_USBPHY_DIRECT_OVERRIDE_DP_PULLUP_HISEL_OVERRIDE_EN_ACCESS "RW" // ============================================================================= // Register : USB_USBPHY_TRIM -// Description : Used to adjust trim values of USB phy pull down resistors. +// Description : Note that most functions are driven directly from usb_fsls +// controller. This register allows more detailed control/status +// from the USB PHY. Useful for debug but not expected to be used +// in normal operation #define USB_USBPHY_TRIM_OFFSET _u(0x00000084) #define USB_USBPHY_TRIM_BITS _u(0x00001f1f) #define USB_USBPHY_TRIM_RESET _u(0x00001f1f) @@ -2931,7 +2780,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTR_DEV_RESUME_FROM_HOST // Description : Set when the device receives a resume from the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTR_DEV_RESUME_FROM_HOST_RESET _u(0x0) #define USB_INTR_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) #define USB_INTR_DEV_RESUME_FROM_HOST_MSB _u(15) @@ -3049,7 +2898,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTR_HOST_RESUME // Description : Host: raised when a device wakes up the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTR_HOST_RESUME_RESET _u(0x0) #define USB_INTR_HOST_RESUME_BITS _u(0x00000002) #define USB_INTR_HOST_RESUME_MSB _u(1) @@ -3109,7 +2958,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTE_DEV_RESUME_FROM_HOST // Description : Set when the device receives a resume from the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTE_DEV_RESUME_FROM_HOST_RESET _u(0x0) #define USB_INTE_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) #define USB_INTE_DEV_RESUME_FROM_HOST_MSB _u(15) @@ -3227,7 +3076,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTE_HOST_RESUME // Description : Host: raised when a device wakes up the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTE_HOST_RESUME_RESET _u(0x0) #define USB_INTE_HOST_RESUME_BITS _u(0x00000002) #define USB_INTE_HOST_RESUME_MSB _u(1) @@ -3287,7 +3136,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTF_DEV_RESUME_FROM_HOST // Description : Set when the device receives a resume from the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTF_DEV_RESUME_FROM_HOST_RESET _u(0x0) #define USB_INTF_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) #define USB_INTF_DEV_RESUME_FROM_HOST_MSB _u(15) @@ -3405,7 +3254,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTF_HOST_RESUME // Description : Host: raised when a device wakes up the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTF_HOST_RESUME_RESET _u(0x0) #define USB_INTF_HOST_RESUME_BITS _u(0x00000002) #define USB_INTF_HOST_RESUME_MSB _u(1) @@ -3465,7 +3314,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTS_DEV_RESUME_FROM_HOST // Description : Set when the device receives a resume from the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTS_DEV_RESUME_FROM_HOST_RESET _u(0x0) #define USB_INTS_DEV_RESUME_FROM_HOST_BITS _u(0x00008000) #define USB_INTS_DEV_RESUME_FROM_HOST_MSB _u(15) @@ -3583,7 +3432,7 @@ // ----------------------------------------------------------------------------- // Field : USB_INTS_HOST_RESUME // Description : Host: raised when a device wakes up the host. Cleared by -// writing to SIE_STATUS.RESUME +// writing to SIE_STATUS.RESUME_REMOTE #define USB_INTS_HOST_RESUME_RESET _u(0x0) #define USB_INTS_HOST_RESUME_BITS _u(0x00000002) #define USB_INTS_HOST_RESUME_MSB _u(1) @@ -3600,4 +3449,5 @@ #define USB_INTS_HOST_CONN_DIS_LSB _u(0) #define USB_INTS_HOST_CONN_DIS_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_USB_DEFINED +#endif // _HARDWARE_REGS_USB_H + diff --git a/lib/rp2040/hardware/regs/usb_device_dpram.h b/lib/pico-sdk/rp2040/hardware/regs/usb_device_dpram.h index 6422774c..d3a5ad32 100644 --- a/lib/rp2040/hardware/regs/usb_device_dpram.h +++ b/lib/pico-sdk/rp2040/hardware/regs/usb_device_dpram.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : ahbl // Description : DPRAM layout for USB device. // ============================================================================= -#ifndef HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED -#define HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED +#ifndef _HARDWARE_REGS_USB_DEVICE_DPRAM_H +#define _HARDWARE_REGS_USB_DEVICE_DPRAM_H // ============================================================================= // Register : USB_DEVICE_DPRAM_SETUP_PACKET_LOW // Description : Bytes 0-3 of the SETUP packet from the host. @@ -19,7 +21,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE -// Description : None #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_RESET _u(0x0000) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_BITS _u(0xffff0000) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_MSB _u(31) @@ -27,7 +28,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_WVALUE_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST -// Description : None #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_RESET _u(0x00) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_BITS _u(0x0000ff00) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_MSB _u(15) @@ -35,7 +35,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BREQUEST_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE -// Description : None #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_RESET _u(0x00) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_BITS _u(0x000000ff) #define USB_DEVICE_DPRAM_SETUP_PACKET_LOW_BMREQUESTTYPE_MSB _u(7) @@ -49,7 +48,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH -// Description : None #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_RESET _u(0x0000) #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_BITS _u(0xffff0000) #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_MSB _u(31) @@ -57,7 +55,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WLENGTH_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX -// Description : None #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_RESET _u(0x0000) #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_BITS _u(0x0000ffff) #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_MSB _u(15) @@ -65,7 +62,6 @@ #define USB_DEVICE_DPRAM_SETUP_PACKET_HIGH_WINDEX_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP1_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_OFFSET _u(0x00000008) #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_RESET _u(0x00000000) @@ -105,19 +101,19 @@ #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP1_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -146,7 +142,6 @@ #define USB_DEVICE_DPRAM_EP1_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP1_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_OFFSET _u(0x0000000c) #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_RESET _u(0x00000000) @@ -186,19 +181,19 @@ #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -227,7 +222,6 @@ #define USB_DEVICE_DPRAM_EP1_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP2_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_OFFSET _u(0x00000010) #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_RESET _u(0x00000000) @@ -267,19 +261,19 @@ #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP2_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -308,7 +302,6 @@ #define USB_DEVICE_DPRAM_EP2_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP2_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_OFFSET _u(0x00000014) #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_RESET _u(0x00000000) @@ -348,19 +341,19 @@ #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -389,7 +382,6 @@ #define USB_DEVICE_DPRAM_EP2_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP3_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_OFFSET _u(0x00000018) #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_RESET _u(0x00000000) @@ -429,19 +421,19 @@ #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP3_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -470,7 +462,6 @@ #define USB_DEVICE_DPRAM_EP3_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP3_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_OFFSET _u(0x0000001c) #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_RESET _u(0x00000000) @@ -510,19 +501,19 @@ #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -551,7 +542,6 @@ #define USB_DEVICE_DPRAM_EP3_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP4_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_OFFSET _u(0x00000020) #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_RESET _u(0x00000000) @@ -591,19 +581,19 @@ #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP4_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -632,7 +622,6 @@ #define USB_DEVICE_DPRAM_EP4_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP4_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_OFFSET _u(0x00000024) #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_RESET _u(0x00000000) @@ -672,19 +661,19 @@ #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -713,7 +702,6 @@ #define USB_DEVICE_DPRAM_EP4_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP5_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_OFFSET _u(0x00000028) #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_RESET _u(0x00000000) @@ -753,19 +741,19 @@ #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP5_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -794,7 +782,6 @@ #define USB_DEVICE_DPRAM_EP5_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP5_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_OFFSET _u(0x0000002c) #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_RESET _u(0x00000000) @@ -834,19 +821,19 @@ #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -875,7 +862,6 @@ #define USB_DEVICE_DPRAM_EP5_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP6_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_OFFSET _u(0x00000030) #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_RESET _u(0x00000000) @@ -915,19 +901,19 @@ #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP6_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -956,7 +942,6 @@ #define USB_DEVICE_DPRAM_EP6_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP6_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_OFFSET _u(0x00000034) #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_RESET _u(0x00000000) @@ -996,19 +981,19 @@ #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1037,7 +1022,6 @@ #define USB_DEVICE_DPRAM_EP6_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP7_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_OFFSET _u(0x00000038) #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_RESET _u(0x00000000) @@ -1077,19 +1061,19 @@ #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP7_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1118,7 +1102,6 @@ #define USB_DEVICE_DPRAM_EP7_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP7_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_OFFSET _u(0x0000003c) #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_RESET _u(0x00000000) @@ -1158,19 +1141,19 @@ #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1199,7 +1182,6 @@ #define USB_DEVICE_DPRAM_EP7_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP8_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_OFFSET _u(0x00000040) #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_RESET _u(0x00000000) @@ -1239,19 +1221,19 @@ #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP8_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1280,7 +1262,6 @@ #define USB_DEVICE_DPRAM_EP8_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP8_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_OFFSET _u(0x00000044) #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_RESET _u(0x00000000) @@ -1320,19 +1301,19 @@ #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1361,7 +1342,6 @@ #define USB_DEVICE_DPRAM_EP8_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP9_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_OFFSET _u(0x00000048) #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_RESET _u(0x00000000) @@ -1401,19 +1381,19 @@ #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP9_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1442,7 +1422,6 @@ #define USB_DEVICE_DPRAM_EP9_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP9_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_OFFSET _u(0x0000004c) #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_RESET _u(0x00000000) @@ -1482,19 +1461,19 @@ #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1523,7 +1502,6 @@ #define USB_DEVICE_DPRAM_EP9_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP10_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_OFFSET _u(0x00000050) #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_RESET _u(0x00000000) @@ -1563,19 +1541,19 @@ #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP10_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1604,7 +1582,6 @@ #define USB_DEVICE_DPRAM_EP10_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP10_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_OFFSET _u(0x00000054) #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_RESET _u(0x00000000) @@ -1644,19 +1621,19 @@ #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1685,7 +1662,6 @@ #define USB_DEVICE_DPRAM_EP10_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP11_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_OFFSET _u(0x00000058) #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_RESET _u(0x00000000) @@ -1725,19 +1701,19 @@ #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP11_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1766,7 +1742,6 @@ #define USB_DEVICE_DPRAM_EP11_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP11_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_OFFSET _u(0x0000005c) #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_RESET _u(0x00000000) @@ -1806,19 +1781,19 @@ #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1847,7 +1822,6 @@ #define USB_DEVICE_DPRAM_EP11_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP12_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_OFFSET _u(0x00000060) #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_RESET _u(0x00000000) @@ -1887,19 +1861,19 @@ #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP12_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -1928,7 +1902,6 @@ #define USB_DEVICE_DPRAM_EP12_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP12_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_OFFSET _u(0x00000064) #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_RESET _u(0x00000000) @@ -1968,19 +1941,19 @@ #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2009,7 +1982,6 @@ #define USB_DEVICE_DPRAM_EP12_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP13_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_OFFSET _u(0x00000068) #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_RESET _u(0x00000000) @@ -2049,19 +2021,19 @@ #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP13_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2090,7 +2062,6 @@ #define USB_DEVICE_DPRAM_EP13_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP13_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_OFFSET _u(0x0000006c) #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_RESET _u(0x00000000) @@ -2130,19 +2101,19 @@ #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2171,7 +2142,6 @@ #define USB_DEVICE_DPRAM_EP13_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP14_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_OFFSET _u(0x00000070) #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_RESET _u(0x00000000) @@ -2211,19 +2181,19 @@ #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP14_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2252,7 +2222,6 @@ #define USB_DEVICE_DPRAM_EP14_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP14_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_OFFSET _u(0x00000074) #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_RESET _u(0x00000000) @@ -2292,19 +2261,19 @@ #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2333,7 +2302,6 @@ #define USB_DEVICE_DPRAM_EP14_OUT_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP15_IN_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_OFFSET _u(0x00000078) #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_RESET _u(0x00000000) @@ -2373,19 +2341,19 @@ #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP15_IN_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_IN_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2414,7 +2382,6 @@ #define USB_DEVICE_DPRAM_EP15_IN_CONTROL_BUFFER_ADDRESS_ACCESS "RW" // ============================================================================= // Register : USB_DEVICE_DPRAM_EP15_OUT_CONTROL -// Description : None #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_OFFSET _u(0x0000007c) #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_BITS _u(0xfc03ffff) #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_RESET _u(0x00000000) @@ -2454,19 +2421,19 @@ #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_PER_DOUBLE_BUFF_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE -// Description : 0x0 -> Control +// 0x0 -> Control // 0x1 -> Isochronous // 0x2 -> Bulk // 0x3 -> Interrupt -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_BITS _u(0x0c000000) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_MSB _u(27) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_LSB _u(26) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_CONTROL _u(0x0) #define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_ISOCHRONOUS _u(0x1) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) -#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_BULK _u(0x2) +#define USB_DEVICE_DPRAM_EP15_OUT_CONTROL_ENDPOINT_TYPE_VALUE_INTERRUPT _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_OUT_CONTROL_INTERRUPT_ON_STALL // Description : Trigger an interrupt if a STALL is sent. Intended for debug @@ -2539,14 +2506,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -2621,7 +2588,7 @@ #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP0_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -2664,8 +2631,7 @@ #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -2674,14 +2640,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -2756,7 +2722,7 @@ #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP0_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -2808,14 +2774,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -2890,7 +2856,7 @@ #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP1_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -2933,8 +2899,7 @@ #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -2943,14 +2908,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -3025,7 +2990,7 @@ #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP1_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3077,14 +3042,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -3159,7 +3124,7 @@ #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP2_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3202,8 +3167,7 @@ #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -3212,14 +3176,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -3294,7 +3258,7 @@ #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP2_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3346,14 +3310,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -3428,7 +3392,7 @@ #define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP3_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3471,8 +3435,7 @@ #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -3481,14 +3444,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -3563,7 +3526,7 @@ #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP3_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3615,14 +3578,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -3697,7 +3660,7 @@ #define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP4_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3740,8 +3703,7 @@ #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -3750,14 +3712,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -3832,7 +3794,7 @@ #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP4_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -3884,14 +3846,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -3966,7 +3928,7 @@ #define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP5_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4009,8 +3971,7 @@ #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -4019,14 +3980,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -4101,7 +4062,7 @@ #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP5_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4153,14 +4114,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -4235,7 +4196,7 @@ #define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP6_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4278,8 +4239,7 @@ #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -4288,14 +4248,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -4370,7 +4330,7 @@ #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP6_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4422,14 +4382,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -4504,7 +4464,7 @@ #define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP7_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4547,8 +4507,7 @@ #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -4557,14 +4516,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -4639,7 +4598,7 @@ #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP7_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4691,14 +4650,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -4773,7 +4732,7 @@ #define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP8_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4816,8 +4775,7 @@ #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -4826,14 +4784,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -4908,7 +4866,7 @@ #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP8_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -4960,14 +4918,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -5042,7 +5000,7 @@ #define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP9_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5085,8 +5043,7 @@ #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5095,14 +5052,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -5177,7 +5134,7 @@ #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP9_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5220,8 +5177,7 @@ #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5230,14 +5186,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -5312,7 +5268,7 @@ #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP10_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5355,8 +5311,7 @@ #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5365,14 +5320,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -5447,7 +5402,7 @@ #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP10_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5490,8 +5445,7 @@ #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5500,14 +5454,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -5582,7 +5536,7 @@ #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP11_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5625,8 +5579,7 @@ #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5635,14 +5588,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -5717,7 +5670,7 @@ #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP11_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5760,8 +5713,7 @@ #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5770,14 +5722,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -5852,7 +5804,7 @@ #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP12_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -5895,8 +5847,7 @@ #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -5905,14 +5856,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -5987,7 +5938,7 @@ #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP12_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6030,8 +5981,7 @@ #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6040,14 +5990,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -6122,7 +6072,7 @@ #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP13_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6165,8 +6115,7 @@ #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6175,14 +6124,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -6257,7 +6206,7 @@ #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP13_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6300,8 +6249,7 @@ #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6310,14 +6258,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -6392,7 +6340,7 @@ #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP14_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6435,8 +6383,7 @@ #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6445,14 +6392,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -6527,7 +6474,7 @@ #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP14_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6570,8 +6517,7 @@ #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSE -// T +// Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6580,14 +6526,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_1 @@ -6662,7 +6608,7 @@ #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP15_IN_BUFFER_CONTROL_LENGTH_0_MSB _u(9) @@ -6705,8 +6651,7 @@ #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_LSB _u(29) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_PID_1_ACCESS "RW" // ----------------------------------------------------------------------------- -// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFS -// ET +// Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET // Description : The number of bytes buffer 1 is offset from buffer 0 in // Isochronous mode. Only valid in double buffered mode for an // Isochronous endpoint. @@ -6715,14 +6660,14 @@ // 0x1 -> 256 // 0x2 -> 512 // 0x3 -> 1024 -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) -#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_RESET _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_BITS _u(0x18000000) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_MSB _u(28) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_LSB _u(27) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_ACCESS "RW" +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_128 _u(0x0) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_256 _u(0x1) +#define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_512 _u(0x2) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_DOUBLE_BUFFER_ISO_OFFSET_VALUE_1024 _u(0x3) // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_1 @@ -6797,11 +6742,12 @@ #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_AVAILABLE_0_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0 -// Description : The length of the data in buffer 1. +// Description : The length of the data in buffer 0. #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_RESET _u(0x000) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_BITS _u(0x000003ff) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_MSB _u(9) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_LSB _u(0) #define USB_DEVICE_DPRAM_EP15_OUT_BUFFER_CONTROL_LENGTH_0_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_USB_DEVICE_DPRAM_DEFINED +#endif // _HARDWARE_REGS_USB_DEVICE_DPRAM_H + diff --git a/lib/rp2040/hardware/regs/vreg_and_chip_reset.h b/lib/pico-sdk/rp2040/hardware/regs/vreg_and_chip_reset.h index 356ff568..da61c01f 100644 --- a/lib/rp2040/hardware/regs/vreg_and_chip_reset.h +++ b/lib/pico-sdk/rp2040/hardware/regs/vreg_and_chip_reset.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -10,8 +12,8 @@ // Description : control and status for on-chip voltage regulator and chip // level reset subsystem // ============================================================================= -#ifndef HARDWARE_REGS_VREG_AND_CHIP_RESET_DEFINED -#define HARDWARE_REGS_VREG_AND_CHIP_RESET_DEFINED +#ifndef _HARDWARE_REGS_VREG_AND_CHIP_RESET_H +#define _HARDWARE_REGS_VREG_AND_CHIP_RESET_H // ============================================================================= // Register : VREG_AND_CHIP_RESET_VREG // Description : Voltage regulator control and status @@ -148,4 +150,5 @@ #define VREG_AND_CHIP_RESET_CHIP_RESET_HAD_POR_LSB _u(8) #define VREG_AND_CHIP_RESET_CHIP_RESET_HAD_POR_ACCESS "RO" // ============================================================================= -#endif // HARDWARE_REGS_VREG_AND_CHIP_RESET_DEFINED +#endif // _HARDWARE_REGS_VREG_AND_CHIP_RESET_H + diff --git a/lib/rp2040/hardware/regs/watchdog.h b/lib/pico-sdk/rp2040/hardware/regs/watchdog.h index 6a9853d4..9c941aed 100644 --- a/lib/rp2040/hardware/regs/watchdog.h +++ b/lib/pico-sdk/rp2040/hardware/regs/watchdog.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -7,10 +9,9 @@ // Register block : WATCHDOG // Version : 1 // Bus type : apb -// Description : None // ============================================================================= -#ifndef HARDWARE_REGS_WATCHDOG_DEFINED -#define HARDWARE_REGS_WATCHDOG_DEFINED +#ifndef _HARDWARE_REGS_WATCHDOG_H +#define _HARDWARE_REGS_WATCHDOG_H // ============================================================================= // Register : WATCHDOG_CTRL // Description : Watchdog control @@ -89,7 +90,6 @@ #define WATCHDOG_REASON_RESET _u(0x00000000) // ----------------------------------------------------------------------------- // Field : WATCHDOG_REASON_FORCE -// Description : None #define WATCHDOG_REASON_FORCE_RESET _u(0x0) #define WATCHDOG_REASON_FORCE_BITS _u(0x00000002) #define WATCHDOG_REASON_FORCE_MSB _u(1) @@ -97,7 +97,6 @@ #define WATCHDOG_REASON_FORCE_ACCESS "RO" // ----------------------------------------------------------------------------- // Field : WATCHDOG_REASON_TIMER -// Description : None #define WATCHDOG_REASON_TIMER_RESET _u(0x0) #define WATCHDOG_REASON_TIMER_BITS _u(0x00000001) #define WATCHDOG_REASON_TIMER_MSB _u(0) @@ -223,4 +222,5 @@ #define WATCHDOG_TICK_CYCLES_LSB _u(0) #define WATCHDOG_TICK_CYCLES_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_WATCHDOG_DEFINED +#endif // _HARDWARE_REGS_WATCHDOG_H + diff --git a/lib/rp2040/hardware/regs/xip.h b/lib/pico-sdk/rp2040/hardware/regs/xip.h index 3964f674..e163f36d 100644 --- a/lib/rp2040/hardware/regs/xip.h +++ b/lib/pico-sdk/rp2040/hardware/regs/xip.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : ahb // Description : QSPI flash execute-in-place block // ============================================================================= -#ifndef HARDWARE_REGS_XIP_DEFINED -#define HARDWARE_REGS_XIP_DEFINED +#ifndef _HARDWARE_REGS_XIP_H +#define _HARDWARE_REGS_XIP_H // ============================================================================= // Register : XIP_CTRL // Description : Cache control @@ -159,8 +161,8 @@ // a linear data block from flash to the streaming FIFO. // Decrements automatically (1 at a time) as the stream // progresses, and halts on reaching 0. -// Write 0 to halt an in-progress stream, and discard any -// in-flight +// Write 0 to halt an in-progress stream, and discard any in- +// flight // read, so that a new stream can immediately be started (after // draining the FIFO and reinitialising STREAM_ADDR) #define XIP_STREAM_CTR_OFFSET _u(0x00000018) @@ -184,4 +186,5 @@ #define XIP_STREAM_FIFO_LSB _u(0) #define XIP_STREAM_FIFO_ACCESS "RF" // ============================================================================= -#endif // HARDWARE_REGS_XIP_DEFINED +#endif // _HARDWARE_REGS_XIP_H + diff --git a/lib/rp2040/hardware/regs/xosc.h b/lib/pico-sdk/rp2040/hardware/regs/xosc.h index 4af78b95..8076a99d 100644 --- a/lib/rp2040/hardware/regs/xosc.h +++ b/lib/pico-sdk/rp2040/hardware/regs/xosc.h @@ -1,5 +1,7 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + /** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ @@ -9,8 +11,8 @@ // Bus type : apb // Description : Controls the crystal oscillator // ============================================================================= -#ifndef HARDWARE_REGS_XOSC_DEFINED -#define HARDWARE_REGS_XOSC_DEFINED +#ifndef _HARDWARE_REGS_XOSC_H +#define _HARDWARE_REGS_XOSC_H // ============================================================================= // Register : XOSC_CTRL // Description : Crystal Oscillator Control @@ -22,34 +24,36 @@ // Description : On power-up this field is initialised to DISABLE and the chip // runs from the ROSC. // If the chip has subsequently been programmed to run from the -// XOSC then setting this field to DISABLE may lock-up the chip. -// If this is a concern then run the clk_ref from the ROSC and -// enable the clk_sys RESUS feature. +// XOSC then DISABLE may lock-up the chip. If this is a concern +// then run the clk_ref from the ROSC and enable the clk_sys RESUS +// feature. // The 12-bit code is intended to give some protection against // accidental writes. An invalid setting will enable the // oscillator. // 0xd1e -> DISABLE // 0xfab -> ENABLE -#define XOSC_CTRL_ENABLE_RESET "-" -#define XOSC_CTRL_ENABLE_BITS _u(0x00fff000) -#define XOSC_CTRL_ENABLE_MSB _u(23) -#define XOSC_CTRL_ENABLE_LSB _u(12) -#define XOSC_CTRL_ENABLE_ACCESS "RW" +#define XOSC_CTRL_ENABLE_RESET "-" +#define XOSC_CTRL_ENABLE_BITS _u(0x00fff000) +#define XOSC_CTRL_ENABLE_MSB _u(23) +#define XOSC_CTRL_ENABLE_LSB _u(12) +#define XOSC_CTRL_ENABLE_ACCESS "RW" #define XOSC_CTRL_ENABLE_VALUE_DISABLE _u(0xd1e) -#define XOSC_CTRL_ENABLE_VALUE_ENABLE _u(0xfab) +#define XOSC_CTRL_ENABLE_VALUE_ENABLE _u(0xfab) // ----------------------------------------------------------------------------- // Field : XOSC_CTRL_FREQ_RANGE -// Description : Frequency range. This resets to 0xAA0 and cannot be changed. +// Description : Frequency range. An invalid setting will retain the previous +// value. The actual value being used can be read from +// STATUS_FREQ_RANGE. This resets to 0xAA0 and cannot be changed. // 0xaa0 -> 1_15MHZ // 0xaa1 -> RESERVED_1 // 0xaa2 -> RESERVED_2 // 0xaa3 -> RESERVED_3 -#define XOSC_CTRL_FREQ_RANGE_RESET "-" -#define XOSC_CTRL_FREQ_RANGE_BITS _u(0x00000fff) -#define XOSC_CTRL_FREQ_RANGE_MSB _u(11) -#define XOSC_CTRL_FREQ_RANGE_LSB _u(0) -#define XOSC_CTRL_FREQ_RANGE_ACCESS "RW" -#define XOSC_CTRL_FREQ_RANGE_VALUE_1_15MHZ _u(0xaa0) +#define XOSC_CTRL_FREQ_RANGE_RESET "-" +#define XOSC_CTRL_FREQ_RANGE_BITS _u(0x00000fff) +#define XOSC_CTRL_FREQ_RANGE_MSB _u(11) +#define XOSC_CTRL_FREQ_RANGE_LSB _u(0) +#define XOSC_CTRL_FREQ_RANGE_ACCESS "RW" +#define XOSC_CTRL_FREQ_RANGE_VALUE_1_15MHZ _u(0xaa0) #define XOSC_CTRL_FREQ_RANGE_VALUE_RESERVED_1 _u(0xaa1) #define XOSC_CTRL_FREQ_RANGE_VALUE_RESERVED_2 _u(0xaa2) #define XOSC_CTRL_FREQ_RANGE_VALUE_RESERVED_3 _u(0xaa3) @@ -92,12 +96,12 @@ // 0x1 -> RESERVED_1 // 0x2 -> RESERVED_2 // 0x3 -> RESERVED_3 -#define XOSC_STATUS_FREQ_RANGE_RESET "-" -#define XOSC_STATUS_FREQ_RANGE_BITS _u(0x00000003) -#define XOSC_STATUS_FREQ_RANGE_MSB _u(1) -#define XOSC_STATUS_FREQ_RANGE_LSB _u(0) -#define XOSC_STATUS_FREQ_RANGE_ACCESS "RO" -#define XOSC_STATUS_FREQ_RANGE_VALUE_1_15MHZ _u(0x0) +#define XOSC_STATUS_FREQ_RANGE_RESET "-" +#define XOSC_STATUS_FREQ_RANGE_BITS _u(0x00000003) +#define XOSC_STATUS_FREQ_RANGE_MSB _u(1) +#define XOSC_STATUS_FREQ_RANGE_LSB _u(0) +#define XOSC_STATUS_FREQ_RANGE_ACCESS "RO" +#define XOSC_STATUS_FREQ_RANGE_VALUE_1_15MHZ _u(0x0) #define XOSC_STATUS_FREQ_RANGE_VALUE_RESERVED_1 _u(0x1) #define XOSC_STATUS_FREQ_RANGE_VALUE_RESERVED_2 _u(0x2) #define XOSC_STATUS_FREQ_RANGE_VALUE_RESERVED_3 _u(0x3) @@ -107,18 +111,18 @@ // This is used to save power by pausing the XOSC // On power-up this field is initialised to WAKE // An invalid write will also select WAKE -// WARNING: stop the PLLs before selecting dormant mode -// WARNING: setup the irq before selecting dormant mode -// 0x636f6d61 -> DORMANT +// Warning: stop the PLLs before selecting dormant mode +// Warning: setup the irq before selecting dormant mode +// 0x636f6d61 -> dormant // 0x77616b65 -> WAKE -#define XOSC_DORMANT_OFFSET _u(0x00000008) -#define XOSC_DORMANT_BITS _u(0xffffffff) -#define XOSC_DORMANT_RESET "-" -#define XOSC_DORMANT_MSB _u(31) -#define XOSC_DORMANT_LSB _u(0) -#define XOSC_DORMANT_ACCESS "RW" +#define XOSC_DORMANT_OFFSET _u(0x00000008) +#define XOSC_DORMANT_BITS _u(0xffffffff) +#define XOSC_DORMANT_RESET "-" +#define XOSC_DORMANT_MSB _u(31) +#define XOSC_DORMANT_LSB _u(0) +#define XOSC_DORMANT_ACCESS "RW" #define XOSC_DORMANT_VALUE_DORMANT _u(0x636f6d61) -#define XOSC_DORMANT_VALUE_WAKE _u(0x77616b65) +#define XOSC_DORMANT_VALUE_WAKE _u(0x77616b65) // ============================================================================= // Register : XOSC_STARTUP // Description : Controls the startup delay @@ -128,7 +132,7 @@ // ----------------------------------------------------------------------------- // Field : XOSC_STARTUP_X4 // Description : Multiplies the startup_delay by 4. This is of little value to -// the user given that the delay can be programmed directly +// the user given that the delay can be programmed directly. #define XOSC_STARTUP_X4_RESET "-" #define XOSC_STARTUP_X4_BITS _u(0x00100000) #define XOSC_STARTUP_X4_MSB _u(20) @@ -136,7 +140,8 @@ #define XOSC_STARTUP_X4_ACCESS "RW" // ----------------------------------------------------------------------------- // Field : XOSC_STARTUP_DELAY -// Description : in multiples of 256*xtal_period +// Description : in multiples of 256*xtal_period. The reset value of 0xc4 +// corresponds to approx 50 000 cycles. #define XOSC_STARTUP_DELAY_RESET "-" #define XOSC_STARTUP_DELAY_BITS _u(0x00003fff) #define XOSC_STARTUP_DELAY_MSB _u(13) @@ -156,4 +161,5 @@ #define XOSC_COUNT_LSB _u(0) #define XOSC_COUNT_ACCESS "RW" // ============================================================================= -#endif // HARDWARE_REGS_XOSC_DEFINED +#endif // _HARDWARE_REGS_XOSC_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/adc.h b/lib/pico-sdk/rp2040/hardware/structs/adc.h new file mode 100644 index 00000000..a1b6f34c --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/adc.h @@ -0,0 +1,96 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_ADC_H +#define _HARDWARE_STRUCTS_ADC_H + +/** + * \file rp2040/adc.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/adc.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_adc +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/adc.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(ADC_CS_OFFSET) // ADC_CS + // ADC Control and Status + // 0x001f0000 [20:16] RROBIN (0x00) Round-robin sampling + // 0x00007000 [14:12] AINSEL (0x0) Select analog mux input + // 0x00000400 [10] ERR_STICKY (0) Some past ADC conversion encountered an error + // 0x00000200 [9] ERR (0) The most recent ADC conversion encountered an error;... + // 0x00000100 [8] READY (0) 1 if the ADC is ready to start a new conversion + // 0x00000008 [3] START_MANY (0) Continuously perform conversions whilst this bit is 1 + // 0x00000004 [2] START_ONCE (0) Start a single conversion + // 0x00000002 [1] TS_EN (0) Power on temperature sensor + // 0x00000001 [0] EN (0) Power on ADC and enable its clock + io_rw_32 cs; + + _REG_(ADC_RESULT_OFFSET) // ADC_RESULT + // Result of most recent ADC conversion + // 0x00000fff [11:0] RESULT (0x000) + io_ro_32 result; + + _REG_(ADC_FCS_OFFSET) // ADC_FCS + // FIFO control and status + // 0x0f000000 [27:24] THRESH (0x0) DREQ/IRQ asserted when level >= threshold + // 0x000f0000 [19:16] LEVEL (0x0) The number of conversion results currently waiting in the FIFO + // 0x00000800 [11] OVER (0) 1 if the FIFO has been overflowed + // 0x00000400 [10] UNDER (0) 1 if the FIFO has been underflowed + // 0x00000200 [9] FULL (0) + // 0x00000100 [8] EMPTY (0) + // 0x00000008 [3] DREQ_EN (0) If 1: assert DMA requests when FIFO contains data + // 0x00000004 [2] ERR (0) If 1: conversion error bit appears in the FIFO alongside... + // 0x00000002 [1] SHIFT (0) If 1: FIFO results are right-shifted to be one byte in size + // 0x00000001 [0] EN (0) If 1: write result to the FIFO after each conversion + io_rw_32 fcs; + + _REG_(ADC_FIFO_OFFSET) // ADC_FIFO + // Conversion result FIFO + // 0x00008000 [15] ERR (-) 1 if this particular sample experienced a conversion error + // 0x00000fff [11:0] VAL (-) + io_ro_32 fifo; + + _REG_(ADC_DIV_OFFSET) // ADC_DIV + // Clock divider + // 0x00ffff00 [23:8] INT (0x0000) Integer part of clock divisor + // 0x000000ff [7:0] FRAC (0x00) Fractional part of clock divisor + io_rw_32 div; + + _REG_(ADC_INTR_OFFSET) // ADC_INTR + // Raw Interrupts + // 0x00000001 [0] FIFO (0) Triggered when the sample FIFO reaches a certain level + io_ro_32 intr; + + _REG_(ADC_INTE_OFFSET) // ADC_INTE + // Interrupt Enable + // 0x00000001 [0] FIFO (0) Triggered when the sample FIFO reaches a certain level + io_rw_32 inte; + + _REG_(ADC_INTF_OFFSET) // ADC_INTF + // Interrupt Force + // 0x00000001 [0] FIFO (0) Triggered when the sample FIFO reaches a certain level + io_rw_32 intf; + + _REG_(ADC_INTS_OFFSET) // ADC_INTS + // Interrupt status after masking & forcing + // 0x00000001 [0] FIFO (0) Triggered when the sample FIFO reaches a certain level + io_ro_32 ints; +} adc_hw_t; + +#define adc_hw ((adc_hw_t *)ADC_BASE) +static_assert(sizeof (adc_hw_t) == 0x0024, ""); + +#endif // _HARDWARE_STRUCTS_ADC_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/bus_ctrl.h b/lib/pico-sdk/rp2040/hardware/structs/bus_ctrl.h new file mode 100644 index 00000000..b94a4045 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/bus_ctrl.h @@ -0,0 +1,9 @@ +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// Support old header for compatibility (and if included, support old variable name) +#include "hardware/structs/busctrl.h" +#define bus_ctrl_hw busctrl_hw
\ No newline at end of file diff --git a/lib/pico-sdk/rp2040/hardware/structs/busctrl.h b/lib/pico-sdk/rp2040/hardware/structs/busctrl.h new file mode 100644 index 00000000..65893227 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/busctrl.h @@ -0,0 +1,85 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_BUSCTRL_H +#define _HARDWARE_STRUCTS_BUSCTRL_H + +/** + * \file rp2040/busctrl.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/busctrl.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_busctrl +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/busctrl.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/** \brief Bus fabric performance counters on RP2040 (used as typedef \ref bus_ctrl_perf_counter_t) + * \ingroup hardware_busctrl + */ +typedef enum bus_ctrl_perf_counter_rp2040 { + arbiter_rom_perf_event_access = 19, + arbiter_rom_perf_event_access_contested = 18, + arbiter_xip_main_perf_event_access = 17, + arbiter_xip_main_perf_event_access_contested = 16, + arbiter_sram0_perf_event_access = 15, + arbiter_sram0_perf_event_access_contested = 14, + arbiter_sram1_perf_event_access = 13, + arbiter_sram1_perf_event_access_contested = 12, + arbiter_sram2_perf_event_access = 11, + arbiter_sram2_perf_event_access_contested = 10, + arbiter_sram3_perf_event_access = 9, + arbiter_sram3_perf_event_access_contested = 8, + arbiter_sram4_perf_event_access = 7, + arbiter_sram4_perf_event_access_contested = 6, + arbiter_sram5_perf_event_access = 5, + arbiter_sram5_perf_event_access_contested = 4, + arbiter_fastperi_perf_event_access = 3, + arbiter_fastperi_perf_event_access_contested = 2, + arbiter_apb_perf_event_access = 1, + arbiter_apb_perf_event_access_contested = 0 +} bus_ctrl_perf_counter_t; + +typedef struct { + _REG_(BUSCTRL_PERFCTR0_OFFSET) // BUSCTRL_PERFCTR0 + // Bus fabric performance counter 0 + // 0x00ffffff [23:0] PERFCTR0 (0x000000) Busfabric saturating performance counter 0 + + io_rw_32 value; + + _REG_(BUSCTRL_PERFSEL0_OFFSET) // BUSCTRL_PERFSEL0 + // Bus fabric performance event select for PERFCTR0 + // 0x0000001f [4:0] PERFSEL0 (0x1f) Select an event for PERFCTR0 + io_rw_32 sel; +} bus_ctrl_perf_hw_t; + +typedef struct { + _REG_(BUSCTRL_BUS_PRIORITY_OFFSET) // BUSCTRL_BUS_PRIORITY + // Set the priority of each master for bus arbitration + // 0x00001000 [12] DMA_W (0) 0 - low priority, 1 - high priority + // 0x00000100 [8] DMA_R (0) 0 - low priority, 1 - high priority + // 0x00000010 [4] PROC1 (0) 0 - low priority, 1 - high priority + // 0x00000001 [0] PROC0 (0) 0 - low priority, 1 - high priority + io_rw_32 priority; + + _REG_(BUSCTRL_BUS_PRIORITY_ACK_OFFSET) // BUSCTRL_BUS_PRIORITY_ACK + // Bus priority acknowledge + // 0x00000001 [0] BUS_PRIORITY_ACK (0) Goes to 1 once all arbiters have registered the new... + io_ro_32 priority_ack; + + bus_ctrl_perf_hw_t counter[4]; +} busctrl_hw_t; + +#define busctrl_hw ((busctrl_hw_t *)BUSCTRL_BASE) +static_assert(sizeof (busctrl_hw_t) == 0x0028, ""); + +#endif // _HARDWARE_STRUCTS_BUSCTRL_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/clocks.h b/lib/pico-sdk/rp2040/hardware/structs/clocks.h new file mode 100644 index 00000000..bdca7ee0 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/clocks.h @@ -0,0 +1,504 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_CLOCKS_H +#define _HARDWARE_STRUCTS_CLOCKS_H + +/** + * \file rp2040/clocks.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/clocks.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_clocks +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/clocks.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/** \brief Clock numbers on RP2040 (used as typedef \ref clock_num_t) + * \ingroup hardware_clocks + */ +/// \tag::clkenum[] +typedef enum clock_num_rp2040 { + clk_gpout0 = 0, ///< Select CLK_GPOUT0 as clock source + clk_gpout1 = 1, ///< Select CLK_GPOUT1 as clock source + clk_gpout2 = 2, ///< Select CLK_GPOUT2 as clock source + clk_gpout3 = 3, ///< Select CLK_GPOUT3 as clock source + clk_ref = 4, ///< Select CLK_REF as clock source + clk_sys = 5, ///< Select CLK_SYS as clock source + clk_peri = 6, ///< Select CLK_PERI as clock source + clk_usb = 7, ///< Select CLK_USB as clock source + clk_adc = 8, ///< Select CLK_ADC as clock source + clk_rtc = 9, ///< Select CLK_RTC as clock source + CLK_COUNT +} clock_num_t; +/// \end::clkenum[] + +/** \brief Clock destination numbers on RP2040 (used as typedef \ref clock_dest_num_t) + * \ingroup hardware_clocks + */ +typedef enum clock_dest_num_rp2040 { + CLK_DEST_SYS_CLOCKS = 0, ///< Select SYS_CLOCKS as clock destination + CLK_DEST_ADC_ADC = 1, ///< Select ADC_ADC as clock destination + CLK_DEST_SYS_ADC = 2, ///< Select SYS_ADC as clock destination + CLK_DEST_SYS_BUSCTRL = 3, ///< Select SYS_BUSCTRL as clock destination + CLK_DEST_SYS_BUSFABRIC = 4, ///< Select SYS_BUSFABRIC as clock destination + CLK_DEST_SYS_DMA = 5, ///< Select SYS_DMA as clock destination + CLK_DEST_SYS_I2C0 = 6, ///< Select SYS_I2C0 as clock destination + CLK_DEST_SYS_I2C1 = 7, ///< Select SYS_I2C1 as clock destination + CLK_DEST_SYS_IO = 8, ///< Select SYS_IO as clock destination + CLK_DEST_SYS_JTAG = 9, ///< Select SYS_JTAG as clock destination + CLK_DEST_SYS_VREG_AND_CHIP_RESET = 10, ///< Select SYS_VREG_AND_CHIP_RESET as clock destination + CLK_DEST_SYS_PADS = 11, ///< Select SYS_PADS as clock destination + CLK_DEST_SYS_PIO0 = 12, ///< Select SYS_PIO0 as clock destination + CLK_DEST_SYS_PIO1 = 13, ///< Select SYS_PIO1 as clock destination + CLK_DEST_SYS_PLL_SYS = 14, ///< Select SYS_PLL_SYS as clock destination + CLK_DEST_SYS_PLL_USB = 15, ///< Select SYS_PLL_USB as clock destination + CLK_DEST_SYS_PSM = 16, ///< Select SYS_PSM as clock destination + CLK_DEST_SYS_PWM = 17, ///< Select SYS_PWM as clock destination + CLK_DEST_SYS_RESETS = 18, ///< Select SYS_RESETS as clock destination + CLK_DEST_SYS_ROM = 19, ///< Select SYS_ROM as clock destination + CLK_DEST_SYS_ROSC = 20, ///< Select SYS_ROSC as clock destination + CLK_DEST_RTC_RTC = 21, ///< Select RTC_RTC as clock destination + CLK_DEST_SYS_RTC = 22, ///< Select SYS_RTC as clock destination + CLK_DEST_SYS_SIO = 23, ///< Select SYS_SIO as clock destination + CLK_DEST_PERI_SPI0 = 24, ///< Select PERI_SPI0 as clock destination + CLK_DEST_SYS_SPI0 = 25, ///< Select SYS_SPI0 as clock destination + CLK_DEST_PERI_SPI1 = 26, ///< Select PERI_SPI1 as clock destination + CLK_DEST_SYS_SPI1 = 27, ///< Select SYS_SPI1 as clock destination + CLK_DEST_SYS_SRAM0 = 28, ///< Select SYS_SRAM0 as clock destination + CLK_DEST_SYS_SRAM1 = 29, ///< Select SYS_SRAM1 as clock destination + CLK_DEST_SYS_SRAM2 = 30, ///< Select SYS_SRAM2 as clock destination + CLK_DEST_SYS_SRAM3 = 31, ///< Select SYS_SRAM3 as clock destination + CLK_DEST_SYS_SRAM4 = 32, ///< Select SYS_SRAM4 as clock destination + CLK_DEST_SYS_SRAM5 = 33, ///< Select SYS_SRAM5 as clock destination + CLK_DEST_SYS_SYSCFG = 34, ///< Select SYS_SYSCFG as clock destination + CLK_DEST_SYS_SYSINFO = 35, ///< Select SYS_SYSINFO as clock destination + CLK_DEST_SYS_TBMAN = 36, ///< Select SYS_TBMAN as clock destination + CLK_DEST_SYS_TIMER = 37, ///< Select SYS_TIMER as clock destination + CLK_DEST_PERI_UART0 = 38, ///< Select PERI_UART0 as clock destination + CLK_DEST_SYS_UART0 = 39, ///< Select SYS_UART0 as clock destination + CLK_DEST_PERI_UART1 = 40, ///< Select PERI_UART1 as clock destination + CLK_DEST_SYS_UART1 = 41, ///< Select SYS_UART1 as clock destination + CLK_DEST_SYS_USBCTRL = 42, ///< Select SYS_USBCTRL as clock destination + CLK_DEST_USB_USBCTRL = 43, ///< Select USB_USBCTRL as clock destination + CLK_DEST_SYS_WATCHDOG = 44, ///< Select SYS_WATCHDOG as clock destination + CLK_DEST_SYS_XIP = 45, ///< Select SYS_XIP as clock destination + CLK_DEST_SYS_XOSC = 46, ///< Select SYS_XOSC as clock destination + NUM_CLOCK_DESTINATIONS +} clock_dest_num_t; + +/// \tag::clock_hw[] +typedef struct { + _REG_(CLOCKS_CLK_GPOUT0_CTRL_OFFSET) // CLOCKS_CLK_GPOUT0_CTRL + // Clock control, can be changed on-the-fly (except for auxsrc) + // 0x00100000 [20] NUDGE (0) An edge on this signal shifts the phase of the output by... + // 0x00030000 [17:16] PHASE (0x0) This delays the enable signal by up to 3 cycles of the... + // 0x00001000 [12] DC50 (0) Enables duty cycle correction for odd divisors + // 0x00000800 [11] ENABLE (0) Starts and stops the clock generator cleanly + // 0x00000400 [10] KILL (0) Asynchronously kills the clock generator + // 0x000001e0 [8:5] AUXSRC (0x0) Selects the auxiliary clock source, will glitch when switching + io_rw_32 ctrl; + + _REG_(CLOCKS_CLK_GPOUT0_DIV_OFFSET) // CLOCKS_CLK_GPOUT0_DIV + // Clock divisor, can be changed on-the-fly + // 0xffffff00 [31:8] INT (0x000001) Integer component of the divisor, 0 -> divide by 2^16 + // 0x000000ff [7:0] FRAC (0x00) Fractional component of the divisor + io_rw_32 div; + + _REG_(CLOCKS_CLK_GPOUT0_SELECTED_OFFSET) // CLOCKS_CLK_GPOUT0_SELECTED + // Indicates which SRC is currently selected by the glitchless mux (one-hot) + // 0xffffffff [31:0] CLK_GPOUT0_SELECTED (0x00000001) This slice does not have a glitchless mux (only the... + io_ro_32 selected; +} clock_hw_t; +/// \end::clock_hw[] + +typedef struct { + _REG_(CLOCKS_CLK_SYS_RESUS_CTRL_OFFSET) // CLOCKS_CLK_SYS_RESUS_CTRL + // 0x00010000 [16] CLEAR (0) For clearing the resus after the fault that triggered it... + // 0x00001000 [12] FRCE (0) Force a resus, for test purposes only + // 0x00000100 [8] ENABLE (0) Enable resus + // 0x000000ff [7:0] TIMEOUT (0xff) This is expressed as a number of clk_ref cycles + + io_rw_32 ctrl; + + _REG_(CLOCKS_CLK_SYS_RESUS_STATUS_OFFSET) // CLOCKS_CLK_SYS_RESUS_STATUS + // 0x00000001 [0] RESUSSED (0) Clock has been resuscitated, correct the error then send... + io_ro_32 status; +} clock_resus_hw_t; + +typedef struct { + _REG_(CLOCKS_FC0_REF_KHZ_OFFSET) // CLOCKS_FC0_REF_KHZ + // Reference clock frequency in kHz + // 0x000fffff [19:0] FC0_REF_KHZ (0x00000) + io_rw_32 ref_khz; + + _REG_(CLOCKS_FC0_MIN_KHZ_OFFSET) // CLOCKS_FC0_MIN_KHZ + // Minimum pass frequency in kHz + // 0x01ffffff [24:0] FC0_MIN_KHZ (0x0000000) + io_rw_32 min_khz; + + _REG_(CLOCKS_FC0_MAX_KHZ_OFFSET) // CLOCKS_FC0_MAX_KHZ + // Maximum pass frequency in kHz + // 0x01ffffff [24:0] FC0_MAX_KHZ (0x1ffffff) + io_rw_32 max_khz; + + _REG_(CLOCKS_FC0_DELAY_OFFSET) // CLOCKS_FC0_DELAY + // Delays the start of frequency counting to allow the mux to settle + + // 0x00000007 [2:0] FC0_DELAY (0x1) + io_rw_32 delay; + + _REG_(CLOCKS_FC0_INTERVAL_OFFSET) // CLOCKS_FC0_INTERVAL + // The test interval is 0 + // 0x0000000f [3:0] FC0_INTERVAL (0x8) + io_rw_32 interval; + + _REG_(CLOCKS_FC0_SRC_OFFSET) // CLOCKS_FC0_SRC + // Clock sent to frequency counter, set to 0 when not required + + // 0x000000ff [7:0] FC0_SRC (0x00) + io_rw_32 src; + + _REG_(CLOCKS_FC0_STATUS_OFFSET) // CLOCKS_FC0_STATUS + // Frequency counter status + // 0x10000000 [28] DIED (0) Test clock stopped during test + // 0x01000000 [24] FAST (0) Test clock faster than expected, only valid when status_done=1 + // 0x00100000 [20] SLOW (0) Test clock slower than expected, only valid when status_done=1 + // 0x00010000 [16] FAIL (0) Test failed + // 0x00001000 [12] WAITING (0) Waiting for test clock to start + // 0x00000100 [8] RUNNING (0) Test running + // 0x00000010 [4] DONE (0) Test complete + // 0x00000001 [0] PASS (0) Test passed + io_ro_32 status; + + _REG_(CLOCKS_FC0_RESULT_OFFSET) // CLOCKS_FC0_RESULT + // Result of frequency measurement, only valid when status_done=1 + // 0x3fffffe0 [29:5] KHZ (0x0000000) + // 0x0000001f [4:0] FRAC (0x00) + io_ro_32 result; +} fc_hw_t; + +typedef struct { + clock_hw_t clk[10]; + + clock_resus_hw_t resus; + + fc_hw_t fc0; + + union { + struct { + _REG_(CLOCKS_WAKE_EN0_OFFSET) // CLOCKS_WAKE_EN0 + // enable clock in wake mode + // 0x80000000 [31] CLK_SYS_SRAM3 (1) + // 0x40000000 [30] CLK_SYS_SRAM2 (1) + // 0x20000000 [29] CLK_SYS_SRAM1 (1) + // 0x10000000 [28] CLK_SYS_SRAM0 (1) + // 0x08000000 [27] CLK_SYS_SPI1 (1) + // 0x04000000 [26] CLK_PERI_SPI1 (1) + // 0x02000000 [25] CLK_SYS_SPI0 (1) + // 0x01000000 [24] CLK_PERI_SPI0 (1) + // 0x00800000 [23] CLK_SYS_SIOB (1) + // 0x00400000 [22] CLK_SYS_RTC (1) + // 0x00200000 [21] CLK_RTC_RTC (1) + // 0x00100000 [20] CLK_SYS_ROSC (1) + // 0x00080000 [19] CLK_SYS_ROM (1) + // 0x00040000 [18] CLK_SYS_RESETS (1) + // 0x00020000 [17] CLK_SYS_PWM (1) + // 0x00010000 [16] CLK_SYS_POWER (1) + // 0x00008000 [15] CLK_SYS_PLL_USB (1) + // 0x00004000 [14] CLK_SYS_PLL_SYS (1) + // 0x00002000 [13] CLK_SYS_PIO1 (1) + // 0x00001000 [12] CLK_SYS_PIO0 (1) + // 0x00000800 [11] CLK_SYS_PADS (1) + // 0x00000400 [10] CLK_SYS_LDO_POR (1) + // 0x00000200 [9] CLK_SYS_JTAG (1) + // 0x00000100 [8] CLK_SYS_IO (1) + // 0x00000080 [7] CLK_SYS_I2C1 (1) + // 0x00000040 [6] CLK_SYS_I2C0 (1) + // 0x00000020 [5] CLK_SYS_DMA (1) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (1) + // 0x00000008 [3] CLK_SYS_BUSCTRL (1) + // 0x00000004 [2] CLK_SYS_ADC0 (1) + // 0x00000002 [1] CLK_ADC_ADC0 (1) + // 0x00000001 [0] CLK_SYS_CLOCKS_BANK_DEFAULT (1) + io_rw_32 wake_en0; + + _REG_(CLOCKS_WAKE_EN1_OFFSET) // CLOCKS_WAKE_EN1 + // enable clock in wake mode + // 0x00004000 [14] CLK_SYS_XOSC (1) + // 0x00002000 [13] CLK_SYS_XIP (1) + // 0x00001000 [12] CLK_SYS_WATCHDOG (1) + // 0x00000800 [11] CLK_USB_USBCTRL (1) + // 0x00000400 [10] CLK_SYS_USBCTRL (1) + // 0x00000200 [9] CLK_SYS_UART1 (1) + // 0x00000100 [8] CLK_PERI_UART1 (1) + // 0x00000080 [7] CLK_SYS_UART0 (1) + // 0x00000040 [6] CLK_PERI_UART0 (1) + // 0x00000020 [5] CLK_SYS_TIMER (1) + // 0x00000010 [4] CLK_SYS_TBMAN (1) + // 0x00000008 [3] CLK_SYS_SYSINFO (1) + // 0x00000004 [2] CLK_SYS_SYSCFG (1) + // 0x00000002 [1] CLK_SYS_SRAM5 (1) + // 0x00000001 [0] CLK_SYS_SRAM4 (1) + io_rw_32 wake_en1; + }; + // (Description copied from array index 0 register CLOCKS_WAKE_EN0 applies similarly to other array indexes) + _REG_(CLOCKS_WAKE_EN0_OFFSET) // CLOCKS_WAKE_EN0 + // enable clock in wake mode + // 0x80000000 [31] CLK_SYS_SRAM3 (1) + // 0x40000000 [30] CLK_SYS_SRAM2 (1) + // 0x20000000 [29] CLK_SYS_SRAM1 (1) + // 0x10000000 [28] CLK_SYS_SRAM0 (1) + // 0x08000000 [27] CLK_SYS_SPI1 (1) + // 0x04000000 [26] CLK_PERI_SPI1 (1) + // 0x02000000 [25] CLK_SYS_SPI0 (1) + // 0x01000000 [24] CLK_PERI_SPI0 (1) + // 0x00800000 [23] CLK_SYS_SIO (1) + // 0x00400000 [22] CLK_SYS_RTC (1) + // 0x00200000 [21] CLK_RTC_RTC (1) + // 0x00100000 [20] CLK_SYS_ROSC (1) + // 0x00080000 [19] CLK_SYS_ROM (1) + // 0x00040000 [18] CLK_SYS_RESETS (1) + // 0x00020000 [17] CLK_SYS_PWM (1) + // 0x00010000 [16] CLK_SYS_PSM (1) + // 0x00008000 [15] CLK_SYS_PLL_USB (1) + // 0x00004000 [14] CLK_SYS_PLL_SYS (1) + // 0x00002000 [13] CLK_SYS_PIO1 (1) + // 0x00001000 [12] CLK_SYS_PIO0 (1) + // 0x00000800 [11] CLK_SYS_PADS (1) + // 0x00000400 [10] CLK_SYS_VREG_AND_CHIP_RESET (1) + // 0x00000200 [9] CLK_SYS_JTAG (1) + // 0x00000100 [8] CLK_SYS_IO (1) + // 0x00000080 [7] CLK_SYS_I2C1 (1) + // 0x00000040 [6] CLK_SYS_I2C0 (1) + // 0x00000020 [5] CLK_SYS_DMA (1) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (1) + // 0x00000008 [3] CLK_SYS_BUSCTRL (1) + // 0x00000004 [2] CLK_SYS_ADC (1) + // 0x00000002 [1] CLK_ADC_ADC (1) + // 0x00000001 [0] CLK_SYS_CLOCKS (1) + io_rw_32 wake_en[2]; + }; + + union { + struct { + _REG_(CLOCKS_SLEEP_EN0_OFFSET) // CLOCKS_SLEEP_EN0 + // enable clock in sleep mode + // 0x80000000 [31] CLK_SYS_SRAM3 (1) + // 0x40000000 [30] CLK_SYS_SRAM2 (1) + // 0x20000000 [29] CLK_SYS_SRAM1 (1) + // 0x10000000 [28] CLK_SYS_SRAM0 (1) + // 0x08000000 [27] CLK_SYS_SPI1 (1) + // 0x04000000 [26] CLK_PERI_SPI1 (1) + // 0x02000000 [25] CLK_SYS_SPI0 (1) + // 0x01000000 [24] CLK_PERI_SPI0 (1) + // 0x00800000 [23] CLK_SYS_SIOB (1) + // 0x00400000 [22] CLK_SYS_RTC (1) + // 0x00200000 [21] CLK_RTC_RTC (1) + // 0x00100000 [20] CLK_SYS_ROSC (1) + // 0x00080000 [19] CLK_SYS_ROM (1) + // 0x00040000 [18] CLK_SYS_RESETS (1) + // 0x00020000 [17] CLK_SYS_PWM (1) + // 0x00010000 [16] CLK_SYS_POWER (1) + // 0x00008000 [15] CLK_SYS_PLL_USB (1) + // 0x00004000 [14] CLK_SYS_PLL_SYS (1) + // 0x00002000 [13] CLK_SYS_PIO1 (1) + // 0x00001000 [12] CLK_SYS_PIO0 (1) + // 0x00000800 [11] CLK_SYS_PADS (1) + // 0x00000400 [10] CLK_SYS_LDO_POR (1) + // 0x00000200 [9] CLK_SYS_JTAG (1) + // 0x00000100 [8] CLK_SYS_IO (1) + // 0x00000080 [7] CLK_SYS_I2C1 (1) + // 0x00000040 [6] CLK_SYS_I2C0 (1) + // 0x00000020 [5] CLK_SYS_DMA (1) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (1) + // 0x00000008 [3] CLK_SYS_BUSCTRL (1) + // 0x00000004 [2] CLK_SYS_ADC0 (1) + // 0x00000002 [1] CLK_ADC_ADC0 (1) + // 0x00000001 [0] CLK_SYS_CLOCKS_BANK_DEFAULT (1) + io_rw_32 sleep_en0; + + _REG_(CLOCKS_SLEEP_EN1_OFFSET) // CLOCKS_SLEEP_EN1 + // enable clock in sleep mode + // 0x00004000 [14] CLK_SYS_XOSC (1) + // 0x00002000 [13] CLK_SYS_XIP (1) + // 0x00001000 [12] CLK_SYS_WATCHDOG (1) + // 0x00000800 [11] CLK_USB_USBCTRL (1) + // 0x00000400 [10] CLK_SYS_USBCTRL (1) + // 0x00000200 [9] CLK_SYS_UART1 (1) + // 0x00000100 [8] CLK_PERI_UART1 (1) + // 0x00000080 [7] CLK_SYS_UART0 (1) + // 0x00000040 [6] CLK_PERI_UART0 (1) + // 0x00000020 [5] CLK_SYS_TIMER (1) + // 0x00000010 [4] CLK_SYS_TBMAN (1) + // 0x00000008 [3] CLK_SYS_SYSINFO (1) + // 0x00000004 [2] CLK_SYS_SYSCFG (1) + // 0x00000002 [1] CLK_SYS_SRAM5 (1) + // 0x00000001 [0] CLK_SYS_SRAM4 (1) + io_rw_32 sleep_en1; + }; + // (Description copied from array index 0 register CLOCKS_SLEEP_EN0 applies similarly to other array indexes) + _REG_(CLOCKS_SLEEP_EN0_OFFSET) // CLOCKS_SLEEP_EN0 + // enable clock in sleep mode + // 0x80000000 [31] CLK_SYS_SRAM3 (1) + // 0x40000000 [30] CLK_SYS_SRAM2 (1) + // 0x20000000 [29] CLK_SYS_SRAM1 (1) + // 0x10000000 [28] CLK_SYS_SRAM0 (1) + // 0x08000000 [27] CLK_SYS_SPI1 (1) + // 0x04000000 [26] CLK_PERI_SPI1 (1) + // 0x02000000 [25] CLK_SYS_SPI0 (1) + // 0x01000000 [24] CLK_PERI_SPI0 (1) + // 0x00800000 [23] CLK_SYS_SIO (1) + // 0x00400000 [22] CLK_SYS_RTC (1) + // 0x00200000 [21] CLK_RTC_RTC (1) + // 0x00100000 [20] CLK_SYS_ROSC (1) + // 0x00080000 [19] CLK_SYS_ROM (1) + // 0x00040000 [18] CLK_SYS_RESETS (1) + // 0x00020000 [17] CLK_SYS_PWM (1) + // 0x00010000 [16] CLK_SYS_PSM (1) + // 0x00008000 [15] CLK_SYS_PLL_USB (1) + // 0x00004000 [14] CLK_SYS_PLL_SYS (1) + // 0x00002000 [13] CLK_SYS_PIO1 (1) + // 0x00001000 [12] CLK_SYS_PIO0 (1) + // 0x00000800 [11] CLK_SYS_PADS (1) + // 0x00000400 [10] CLK_SYS_VREG_AND_CHIP_RESET (1) + // 0x00000200 [9] CLK_SYS_JTAG (1) + // 0x00000100 [8] CLK_SYS_IO (1) + // 0x00000080 [7] CLK_SYS_I2C1 (1) + // 0x00000040 [6] CLK_SYS_I2C0 (1) + // 0x00000020 [5] CLK_SYS_DMA (1) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (1) + // 0x00000008 [3] CLK_SYS_BUSCTRL (1) + // 0x00000004 [2] CLK_SYS_ADC (1) + // 0x00000002 [1] CLK_ADC_ADC (1) + // 0x00000001 [0] CLK_SYS_CLOCKS (1) + io_rw_32 sleep_en[2]; + }; + + union { + struct { + _REG_(CLOCKS_ENABLED0_OFFSET) // CLOCKS_ENABLED0 + // indicates the state of the clock enable + // 0x80000000 [31] CLK_SYS_SRAM3 (0) + // 0x40000000 [30] CLK_SYS_SRAM2 (0) + // 0x20000000 [29] CLK_SYS_SRAM1 (0) + // 0x10000000 [28] CLK_SYS_SRAM0 (0) + // 0x08000000 [27] CLK_SYS_SPI1 (0) + // 0x04000000 [26] CLK_PERI_SPI1 (0) + // 0x02000000 [25] CLK_SYS_SPI0 (0) + // 0x01000000 [24] CLK_PERI_SPI0 (0) + // 0x00800000 [23] CLK_SYS_SIOB (0) + // 0x00400000 [22] CLK_SYS_RTC (0) + // 0x00200000 [21] CLK_RTC_RTC (0) + // 0x00100000 [20] CLK_SYS_ROSC (0) + // 0x00080000 [19] CLK_SYS_ROM (0) + // 0x00040000 [18] CLK_SYS_RESETS (0) + // 0x00020000 [17] CLK_SYS_PWM (0) + // 0x00010000 [16] CLK_SYS_POWER (0) + // 0x00008000 [15] CLK_SYS_PLL_USB (0) + // 0x00004000 [14] CLK_SYS_PLL_SYS (0) + // 0x00002000 [13] CLK_SYS_PIO1 (0) + // 0x00001000 [12] CLK_SYS_PIO0 (0) + // 0x00000800 [11] CLK_SYS_PADS (0) + // 0x00000400 [10] CLK_SYS_LDO_POR (0) + // 0x00000200 [9] CLK_SYS_JTAG (0) + // 0x00000100 [8] CLK_SYS_IO (0) + // 0x00000080 [7] CLK_SYS_I2C1 (0) + // 0x00000040 [6] CLK_SYS_I2C0 (0) + // 0x00000020 [5] CLK_SYS_DMA (0) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (0) + // 0x00000008 [3] CLK_SYS_BUSCTRL (0) + // 0x00000004 [2] CLK_SYS_ADC0 (0) + // 0x00000002 [1] CLK_ADC_ADC0 (0) + // 0x00000001 [0] CLK_SYS_CLOCKS_BANK_DEFAULT (0) + io_ro_32 enabled0; + + _REG_(CLOCKS_ENABLED1_OFFSET) // CLOCKS_ENABLED1 + // indicates the state of the clock enable + // 0x00004000 [14] CLK_SYS_XOSC (0) + // 0x00002000 [13] CLK_SYS_XIP (0) + // 0x00001000 [12] CLK_SYS_WATCHDOG (0) + // 0x00000800 [11] CLK_USB_USBCTRL (0) + // 0x00000400 [10] CLK_SYS_USBCTRL (0) + // 0x00000200 [9] CLK_SYS_UART1 (0) + // 0x00000100 [8] CLK_PERI_UART1 (0) + // 0x00000080 [7] CLK_SYS_UART0 (0) + // 0x00000040 [6] CLK_PERI_UART0 (0) + // 0x00000020 [5] CLK_SYS_TIMER (0) + // 0x00000010 [4] CLK_SYS_TBMAN (0) + // 0x00000008 [3] CLK_SYS_SYSINFO (0) + // 0x00000004 [2] CLK_SYS_SYSCFG (0) + // 0x00000002 [1] CLK_SYS_SRAM5 (0) + // 0x00000001 [0] CLK_SYS_SRAM4 (0) + io_ro_32 enabled1; + }; + // (Description copied from array index 0 register CLOCKS_ENABLED0 applies similarly to other array indexes) + _REG_(CLOCKS_ENABLED0_OFFSET) // CLOCKS_ENABLED0 + // indicates the state of the clock enable + // 0x80000000 [31] CLK_SYS_SRAM3 (0) + // 0x40000000 [30] CLK_SYS_SRAM2 (0) + // 0x20000000 [29] CLK_SYS_SRAM1 (0) + // 0x10000000 [28] CLK_SYS_SRAM0 (0) + // 0x08000000 [27] CLK_SYS_SPI1 (0) + // 0x04000000 [26] CLK_PERI_SPI1 (0) + // 0x02000000 [25] CLK_SYS_SPI0 (0) + // 0x01000000 [24] CLK_PERI_SPI0 (0) + // 0x00800000 [23] CLK_SYS_SIO (0) + // 0x00400000 [22] CLK_SYS_RTC (0) + // 0x00200000 [21] CLK_RTC_RTC (0) + // 0x00100000 [20] CLK_SYS_ROSC (0) + // 0x00080000 [19] CLK_SYS_ROM (0) + // 0x00040000 [18] CLK_SYS_RESETS (0) + // 0x00020000 [17] CLK_SYS_PWM (0) + // 0x00010000 [16] CLK_SYS_PSM (0) + // 0x00008000 [15] CLK_SYS_PLL_USB (0) + // 0x00004000 [14] CLK_SYS_PLL_SYS (0) + // 0x00002000 [13] CLK_SYS_PIO1 (0) + // 0x00001000 [12] CLK_SYS_PIO0 (0) + // 0x00000800 [11] CLK_SYS_PADS (0) + // 0x00000400 [10] CLK_SYS_VREG_AND_CHIP_RESET (0) + // 0x00000200 [9] CLK_SYS_JTAG (0) + // 0x00000100 [8] CLK_SYS_IO (0) + // 0x00000080 [7] CLK_SYS_I2C1 (0) + // 0x00000040 [6] CLK_SYS_I2C0 (0) + // 0x00000020 [5] CLK_SYS_DMA (0) + // 0x00000010 [4] CLK_SYS_BUSFABRIC (0) + // 0x00000008 [3] CLK_SYS_BUSCTRL (0) + // 0x00000004 [2] CLK_SYS_ADC (0) + // 0x00000002 [1] CLK_ADC_ADC (0) + // 0x00000001 [0] CLK_SYS_CLOCKS (0) + io_ro_32 enabled[2]; + }; + + _REG_(CLOCKS_INTR_OFFSET) // CLOCKS_INTR + // Raw Interrupts + // 0x00000001 [0] CLK_SYS_RESUS (0) + io_ro_32 intr; + + _REG_(CLOCKS_INTE_OFFSET) // CLOCKS_INTE + // Interrupt Enable + // 0x00000001 [0] CLK_SYS_RESUS (0) + io_rw_32 inte; + + _REG_(CLOCKS_INTF_OFFSET) // CLOCKS_INTF + // Interrupt Force + // 0x00000001 [0] CLK_SYS_RESUS (0) + io_rw_32 intf; + + _REG_(CLOCKS_INTS_OFFSET) // CLOCKS_INTS + // Interrupt status after masking & forcing + // 0x00000001 [0] CLK_SYS_RESUS (0) + io_ro_32 ints; +} clocks_hw_t; + +#define clocks_hw ((clocks_hw_t *)CLOCKS_BASE) +static_assert(sizeof (clocks_hw_t) == 0x00c8, ""); + +#endif // _HARDWARE_STRUCTS_CLOCKS_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/dma.h b/lib/pico-sdk/rp2040/hardware/structs/dma.h new file mode 100644 index 00000000..bc83060f --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/dma.h @@ -0,0 +1,239 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_DMA_H +#define _HARDWARE_STRUCTS_DMA_H + +/** + * \file rp2040/dma.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/dma.h" +#include "hardware/structs/dma_debug.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_dma +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/dma.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(DMA_CH0_READ_ADDR_OFFSET) // DMA_CH0_READ_ADDR + // DMA Channel 0 Read Address pointer + // 0xffffffff [31:0] CH0_READ_ADDR (0x00000000) This register updates automatically each time a read completes + io_rw_32 read_addr; + + _REG_(DMA_CH0_WRITE_ADDR_OFFSET) // DMA_CH0_WRITE_ADDR + // DMA Channel 0 Write Address pointer + // 0xffffffff [31:0] CH0_WRITE_ADDR (0x00000000) This register updates automatically each time a write completes + io_rw_32 write_addr; + + _REG_(DMA_CH0_TRANS_COUNT_OFFSET) // DMA_CH0_TRANS_COUNT + // DMA Channel 0 Transfer Count + // 0xffffffff [31:0] CH0_TRANS_COUNT (0x00000000) Program the number of bus transfers a channel will... + io_rw_32 transfer_count; + + _REG_(DMA_CH0_CTRL_TRIG_OFFSET) // DMA_CH0_CTRL_TRIG + // DMA Channel 0 Control and Status + // 0x80000000 [31] AHB_ERROR (0) Logical OR of the READ_ERROR and WRITE_ERROR flags + // 0x40000000 [30] READ_ERROR (0) If 1, the channel received a read bus error + // 0x20000000 [29] WRITE_ERROR (0) If 1, the channel received a write bus error + // 0x01000000 [24] BUSY (0) This flag goes high when the channel starts a new... + // 0x00800000 [23] SNIFF_EN (0) If 1, this channel's data transfers are visible to the... + // 0x00400000 [22] BSWAP (0) Apply byte-swap transformation to DMA data + // 0x00200000 [21] IRQ_QUIET (0) In QUIET mode, the channel does not generate IRQs at the... + // 0x001f8000 [20:15] TREQ_SEL (0x00) Select a Transfer Request signal + // 0x00007800 [14:11] CHAIN_TO (0x0) When this channel completes, it will trigger the channel... + // 0x00000400 [10] RING_SEL (0) Select whether RING_SIZE applies to read or write addresses + // 0x000003c0 [9:6] RING_SIZE (0x0) Size of address wrap region + // 0x00000020 [5] INCR_WRITE (0) If 1, the write address increments with each transfer + // 0x00000010 [4] INCR_READ (0) If 1, the read address increments with each transfer + // 0x0000000c [3:2] DATA_SIZE (0x0) Set the size of each bus transfer (byte/halfword/word) + // 0x00000002 [1] HIGH_PRIORITY (0) HIGH_PRIORITY gives a channel preferential treatment in... + // 0x00000001 [0] EN (0) DMA Channel Enable + io_rw_32 ctrl_trig; + + _REG_(DMA_CH0_AL1_CTRL_OFFSET) // DMA_CH0_AL1_CTRL + // Alias for channel 0 CTRL register + // 0xffffffff [31:0] CH0_AL1_CTRL (-) + io_rw_32 al1_ctrl; + + _REG_(DMA_CH0_AL1_READ_ADDR_OFFSET) // DMA_CH0_AL1_READ_ADDR + // Alias for channel 0 READ_ADDR register + // 0xffffffff [31:0] CH0_AL1_READ_ADDR (-) + io_rw_32 al1_read_addr; + + _REG_(DMA_CH0_AL1_WRITE_ADDR_OFFSET) // DMA_CH0_AL1_WRITE_ADDR + // Alias for channel 0 WRITE_ADDR register + // 0xffffffff [31:0] CH0_AL1_WRITE_ADDR (-) + io_rw_32 al1_write_addr; + + _REG_(DMA_CH0_AL1_TRANS_COUNT_TRIG_OFFSET) // DMA_CH0_AL1_TRANS_COUNT_TRIG + // Alias for channel 0 TRANS_COUNT register + + // 0xffffffff [31:0] CH0_AL1_TRANS_COUNT_TRIG (-) + io_rw_32 al1_transfer_count_trig; + + _REG_(DMA_CH0_AL2_CTRL_OFFSET) // DMA_CH0_AL2_CTRL + // Alias for channel 0 CTRL register + // 0xffffffff [31:0] CH0_AL2_CTRL (-) + io_rw_32 al2_ctrl; + + _REG_(DMA_CH0_AL2_TRANS_COUNT_OFFSET) // DMA_CH0_AL2_TRANS_COUNT + // Alias for channel 0 TRANS_COUNT register + // 0xffffffff [31:0] CH0_AL2_TRANS_COUNT (-) + io_rw_32 al2_transfer_count; + + _REG_(DMA_CH0_AL2_READ_ADDR_OFFSET) // DMA_CH0_AL2_READ_ADDR + // Alias for channel 0 READ_ADDR register + // 0xffffffff [31:0] CH0_AL2_READ_ADDR (-) + io_rw_32 al2_read_addr; + + _REG_(DMA_CH0_AL2_WRITE_ADDR_TRIG_OFFSET) // DMA_CH0_AL2_WRITE_ADDR_TRIG + // Alias for channel 0 WRITE_ADDR register + + // 0xffffffff [31:0] CH0_AL2_WRITE_ADDR_TRIG (-) + io_rw_32 al2_write_addr_trig; + + _REG_(DMA_CH0_AL3_CTRL_OFFSET) // DMA_CH0_AL3_CTRL + // Alias for channel 0 CTRL register + // 0xffffffff [31:0] CH0_AL3_CTRL (-) + io_rw_32 al3_ctrl; + + _REG_(DMA_CH0_AL3_WRITE_ADDR_OFFSET) // DMA_CH0_AL3_WRITE_ADDR + // Alias for channel 0 WRITE_ADDR register + // 0xffffffff [31:0] CH0_AL3_WRITE_ADDR (-) + io_rw_32 al3_write_addr; + + _REG_(DMA_CH0_AL3_TRANS_COUNT_OFFSET) // DMA_CH0_AL3_TRANS_COUNT + // Alias for channel 0 TRANS_COUNT register + // 0xffffffff [31:0] CH0_AL3_TRANS_COUNT (-) + io_rw_32 al3_transfer_count; + + _REG_(DMA_CH0_AL3_READ_ADDR_TRIG_OFFSET) // DMA_CH0_AL3_READ_ADDR_TRIG + // Alias for channel 0 READ_ADDR register + + // 0xffffffff [31:0] CH0_AL3_READ_ADDR_TRIG (-) + io_rw_32 al3_read_addr_trig; +} dma_channel_hw_t; + +typedef struct { + _REG_(DMA_INTR_OFFSET) // DMA_INTR + // Interrupt Status (raw) + // 0x0000ffff [15:0] INTR (0x0000) Raw interrupt status for DMA Channels 0 + io_rw_32 intr; + + _REG_(DMA_INTE0_OFFSET) // DMA_INTE0 + // Interrupt Enables for IRQ 0 + // 0x0000ffff [15:0] INTE0 (0x0000) Set bit n to pass interrupts from channel n to DMA IRQ 0 + io_rw_32 inte; + + _REG_(DMA_INTF0_OFFSET) // DMA_INTF0 + // Force Interrupts + // 0x0000ffff [15:0] INTF0 (0x0000) Write 1s to force the corresponding bits in INTE0 + io_rw_32 intf; + + _REG_(DMA_INTS0_OFFSET) // DMA_INTS0 + // Interrupt Status for IRQ 0 + // 0x0000ffff [15:0] INTS0 (0x0000) Indicates active channel interrupt requests which are... + io_rw_32 ints; +} dma_irq_ctrl_hw_t; + +typedef struct { + dma_channel_hw_t ch[12]; + + uint32_t _pad0[64]; + + union { + struct { + _REG_(DMA_INTR_OFFSET) // DMA_INTR + // Interrupt Status (raw) + // 0x0000ffff [15:0] INTR (0x0000) Raw interrupt status for DMA Channels 0 + io_rw_32 intr; + + _REG_(DMA_INTE0_OFFSET) // DMA_INTE0 + // Interrupt Enables for IRQ 0 + // 0x0000ffff [15:0] INTE0 (0x0000) Set bit n to pass interrupts from channel n to DMA IRQ 0 + io_rw_32 inte0; + + _REG_(DMA_INTF0_OFFSET) // DMA_INTF0 + // Force Interrupts + // 0x0000ffff [15:0] INTF0 (0x0000) Write 1s to force the corresponding bits in INTE0 + io_rw_32 intf0; + + _REG_(DMA_INTS0_OFFSET) // DMA_INTS0 + // Interrupt Status for IRQ 0 + // 0x0000ffff [15:0] INTS0 (0x0000) Indicates active channel interrupt requests which are... + io_rw_32 ints0; + + uint32_t __pad0; + + _REG_(DMA_INTE1_OFFSET) // DMA_INTE1 + // Interrupt Enables for IRQ 1 + // 0x0000ffff [15:0] INTE1 (0x0000) Set bit n to pass interrupts from channel n to DMA IRQ 1 + io_rw_32 inte1; + + _REG_(DMA_INTF1_OFFSET) // DMA_INTF1 + // Force Interrupts for IRQ 1 + // 0x0000ffff [15:0] INTF1 (0x0000) Write 1s to force the corresponding bits in INTF1 + io_rw_32 intf1; + + _REG_(DMA_INTS1_OFFSET) // DMA_INTS1 + // Interrupt Status (masked) for IRQ 1 + // 0x0000ffff [15:0] INTS1 (0x0000) Indicates active channel interrupt requests which are... + io_rw_32 ints1; + }; + dma_irq_ctrl_hw_t irq_ctrl[2]; + }; + + // (Description copied from array index 0 register DMA_TIMER0 applies similarly to other array indexes) + _REG_(DMA_TIMER0_OFFSET) // DMA_TIMER0 + // Pacing (X/Y) Fractional Timer + + // 0xffff0000 [31:16] X (0x0000) Pacing Timer Dividend + // 0x0000ffff [15:0] Y (0x0000) Pacing Timer Divisor + io_rw_32 timer[4]; + + _REG_(DMA_MULTI_CHAN_TRIGGER_OFFSET) // DMA_MULTI_CHAN_TRIGGER + // Trigger one or more channels simultaneously + // 0x0000ffff [15:0] MULTI_CHAN_TRIGGER (0x0000) Each bit in this register corresponds to a DMA channel + io_wo_32 multi_channel_trigger; + + _REG_(DMA_SNIFF_CTRL_OFFSET) // DMA_SNIFF_CTRL + // Sniffer Control + // 0x00000800 [11] OUT_INV (0) If set, the result appears inverted (bitwise complement)... + // 0x00000400 [10] OUT_REV (0) If set, the result appears bit-reversed when read + // 0x00000200 [9] BSWAP (0) Locally perform a byte reverse on the sniffed data,... + // 0x000001e0 [8:5] CALC (0x0) + // 0x0000001e [4:1] DMACH (0x0) DMA channel for Sniffer to observe + // 0x00000001 [0] EN (0) Enable sniffer + io_rw_32 sniff_ctrl; + + _REG_(DMA_SNIFF_DATA_OFFSET) // DMA_SNIFF_DATA + // Data accumulator for sniff hardware + // 0xffffffff [31:0] SNIFF_DATA (0x00000000) Write an initial seed value here before starting a DMA... + io_rw_32 sniff_data; + + uint32_t _pad1; + + _REG_(DMA_FIFO_LEVELS_OFFSET) // DMA_FIFO_LEVELS + // Debug RAF, WAF, TDF levels + // 0x00ff0000 [23:16] RAF_LVL (0x00) Current Read-Address-FIFO fill level + // 0x0000ff00 [15:8] WAF_LVL (0x00) Current Write-Address-FIFO fill level + // 0x000000ff [7:0] TDF_LVL (0x00) Current Transfer-Data-FIFO fill level + io_ro_32 fifo_levels; + + _REG_(DMA_CHAN_ABORT_OFFSET) // DMA_CHAN_ABORT + // Abort an in-progress transfer sequence on one or more channels + // 0x0000ffff [15:0] CHAN_ABORT (0x0000) Each bit corresponds to a channel + io_wo_32 abort; +} dma_hw_t; + +#define dma_hw ((dma_hw_t *)DMA_BASE) +static_assert(sizeof (dma_hw_t) == 0x0448, ""); + +#endif // _HARDWARE_STRUCTS_DMA_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/dma_debug.h b/lib/pico-sdk/rp2040/hardware/structs/dma_debug.h new file mode 100644 index 00000000..239b8cae --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/dma_debug.h @@ -0,0 +1,47 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_DMA_DEBUG_H +#define _HARDWARE_STRUCTS_DMA_DEBUG_H + +/** + * \file rp2040/dma_debug.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/dma.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_dma +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/dma.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(DMA_CH0_DBG_CTDREQ_OFFSET) // DMA_CH0_DBG_CTDREQ + // Read: get channel DREQ counter (i + // 0x0000003f [5:0] CH0_DBG_CTDREQ (0x00) + io_rw_32 dbg_ctdreq; + + _REG_(DMA_CH0_DBG_TCR_OFFSET) // DMA_CH0_DBG_TCR + // Read to get channel TRANS_COUNT reload value, i + // 0xffffffff [31:0] CH0_DBG_TCR (0x00000000) + io_ro_32 dbg_tcr; + + uint32_t _pad0[14]; +} dma_debug_channel_hw_t; + +typedef struct { + dma_debug_channel_hw_t ch[12]; +} dma_debug_hw_t; + +#define dma_debug_hw ((dma_debug_hw_t *)(DMA_BASE + DMA_CH0_DBG_CTDREQ_OFFSET)) + +#endif // _HARDWARE_STRUCTS_DMA_DEBUG_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/i2c.h b/lib/pico-sdk/rp2040/hardware/structs/i2c.h new file mode 100644 index 00000000..2ff09979 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/i2c.h @@ -0,0 +1,338 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_I2C_H +#define _HARDWARE_STRUCTS_I2C_H + +/** + * \file rp2040/i2c.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/i2c.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_i2c +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/i2c.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(I2C_IC_CON_OFFSET) // I2C_IC_CON + // I2C Control Register + // 0x00000400 [10] STOP_DET_IF_MASTER_ACTIVE (0) Master issues the STOP_DET interrupt irrespective of... + // 0x00000200 [9] RX_FIFO_FULL_HLD_CTRL (0) This bit controls whether DW_apb_i2c should hold the bus... + // 0x00000100 [8] TX_EMPTY_CTRL (0) This bit controls the generation of the TX_EMPTY... + // 0x00000080 [7] STOP_DET_IFADDRESSED (0) In slave mode: - 1'b1: issues the STOP_DET interrupt... + // 0x00000040 [6] IC_SLAVE_DISABLE (1) This bit controls whether I2C has its slave disabled,... + // 0x00000020 [5] IC_RESTART_EN (1) Determines whether RESTART conditions may be sent when... + // 0x00000010 [4] IC_10BITADDR_MASTER (0) Controls whether the DW_apb_i2c starts its transfers in... + // 0x00000008 [3] IC_10BITADDR_SLAVE (0) When acting as a slave, this bit controls whether the... + // 0x00000006 [2:1] SPEED (0x2) These bits control at which speed the DW_apb_i2c... + // 0x00000001 [0] MASTER_MODE (1) This bit controls whether the DW_apb_i2c master is enabled + io_rw_32 con; + + _REG_(I2C_IC_TAR_OFFSET) // I2C_IC_TAR + // I2C Target Address Register + // 0x00000800 [11] SPECIAL (0) This bit indicates whether software performs a Device-ID... + // 0x00000400 [10] GC_OR_START (0) If bit 11 (SPECIAL) is set to 1 and bit 13(Device-ID) is... + // 0x000003ff [9:0] IC_TAR (0x055) This is the target address for any master transaction + io_rw_32 tar; + + _REG_(I2C_IC_SAR_OFFSET) // I2C_IC_SAR + // I2C Slave Address Register + // 0x000003ff [9:0] IC_SAR (0x055) The IC_SAR holds the slave address when the I2C is... + io_rw_32 sar; + + uint32_t _pad0; + + _REG_(I2C_IC_DATA_CMD_OFFSET) // I2C_IC_DATA_CMD + // I2C Rx/Tx Data Buffer and Command Register + // 0x00000800 [11] FIRST_DATA_BYTE (0) Indicates the first data byte received after the address... + // 0x00000400 [10] RESTART (0) This bit controls whether a RESTART is issued before the... + // 0x00000200 [9] STOP (0) This bit controls whether a STOP is issued after the... + // 0x00000100 [8] CMD (0) This bit controls whether a read or a write is performed + // 0x000000ff [7:0] DAT (0x00) This register contains the data to be transmitted or... + io_rw_32 data_cmd; + + _REG_(I2C_IC_SS_SCL_HCNT_OFFSET) // I2C_IC_SS_SCL_HCNT + // Standard Speed I2C Clock SCL High Count Register + // 0x0000ffff [15:0] IC_SS_SCL_HCNT (0x0028) This register must be set before any I2C bus transaction... + io_rw_32 ss_scl_hcnt; + + _REG_(I2C_IC_SS_SCL_LCNT_OFFSET) // I2C_IC_SS_SCL_LCNT + // Standard Speed I2C Clock SCL Low Count Register + // 0x0000ffff [15:0] IC_SS_SCL_LCNT (0x002f) This register must be set before any I2C bus transaction... + io_rw_32 ss_scl_lcnt; + + _REG_(I2C_IC_FS_SCL_HCNT_OFFSET) // I2C_IC_FS_SCL_HCNT + // Fast Mode or Fast Mode Plus I2C Clock SCL High Count Register + // 0x0000ffff [15:0] IC_FS_SCL_HCNT (0x0006) This register must be set before any I2C bus transaction... + io_rw_32 fs_scl_hcnt; + + _REG_(I2C_IC_FS_SCL_LCNT_OFFSET) // I2C_IC_FS_SCL_LCNT + // Fast Mode or Fast Mode Plus I2C Clock SCL Low Count Register + // 0x0000ffff [15:0] IC_FS_SCL_LCNT (0x000d) This register must be set before any I2C bus transaction... + io_rw_32 fs_scl_lcnt; + + uint32_t _pad1[2]; + + _REG_(I2C_IC_INTR_STAT_OFFSET) // I2C_IC_INTR_STAT + // I2C Interrupt Status Register + // 0x00001000 [12] R_RESTART_DET (0) See IC_RAW_INTR_STAT for a detailed description of... + // 0x00000800 [11] R_GEN_CALL (0) See IC_RAW_INTR_STAT for a detailed description of R_GEN_CALL bit + // 0x00000400 [10] R_START_DET (0) See IC_RAW_INTR_STAT for a detailed description of... + // 0x00000200 [9] R_STOP_DET (0) See IC_RAW_INTR_STAT for a detailed description of R_STOP_DET bit + // 0x00000100 [8] R_ACTIVITY (0) See IC_RAW_INTR_STAT for a detailed description of R_ACTIVITY bit + // 0x00000080 [7] R_RX_DONE (0) See IC_RAW_INTR_STAT for a detailed description of R_RX_DONE bit + // 0x00000040 [6] R_TX_ABRT (0) See IC_RAW_INTR_STAT for a detailed description of R_TX_ABRT bit + // 0x00000020 [5] R_RD_REQ (0) See IC_RAW_INTR_STAT for a detailed description of R_RD_REQ bit + // 0x00000010 [4] R_TX_EMPTY (0) See IC_RAW_INTR_STAT for a detailed description of R_TX_EMPTY bit + // 0x00000008 [3] R_TX_OVER (0) See IC_RAW_INTR_STAT for a detailed description of R_TX_OVER bit + // 0x00000004 [2] R_RX_FULL (0) See IC_RAW_INTR_STAT for a detailed description of R_RX_FULL bit + // 0x00000002 [1] R_RX_OVER (0) See IC_RAW_INTR_STAT for a detailed description of R_RX_OVER bit + // 0x00000001 [0] R_RX_UNDER (0) See IC_RAW_INTR_STAT for a detailed description of R_RX_UNDER bit + io_ro_32 intr_stat; + + _REG_(I2C_IC_INTR_MASK_OFFSET) // I2C_IC_INTR_MASK + // I2C Interrupt Mask Register + // 0x00001000 [12] M_RESTART_DET (0) This bit masks the R_RESTART_DET interrupt in... + // 0x00000800 [11] M_GEN_CALL (1) This bit masks the R_GEN_CALL interrupt in IC_INTR_STAT register + // 0x00000400 [10] M_START_DET (0) This bit masks the R_START_DET interrupt in IC_INTR_STAT register + // 0x00000200 [9] M_STOP_DET (0) This bit masks the R_STOP_DET interrupt in IC_INTR_STAT register + // 0x00000100 [8] M_ACTIVITY (0) This bit masks the R_ACTIVITY interrupt in IC_INTR_STAT register + // 0x00000080 [7] M_RX_DONE (1) This bit masks the R_RX_DONE interrupt in IC_INTR_STAT register + // 0x00000040 [6] M_TX_ABRT (1) This bit masks the R_TX_ABRT interrupt in IC_INTR_STAT register + // 0x00000020 [5] M_RD_REQ (1) This bit masks the R_RD_REQ interrupt in IC_INTR_STAT register + // 0x00000010 [4] M_TX_EMPTY (1) This bit masks the R_TX_EMPTY interrupt in IC_INTR_STAT register + // 0x00000008 [3] M_TX_OVER (1) This bit masks the R_TX_OVER interrupt in IC_INTR_STAT register + // 0x00000004 [2] M_RX_FULL (1) This bit masks the R_RX_FULL interrupt in IC_INTR_STAT register + // 0x00000002 [1] M_RX_OVER (1) This bit masks the R_RX_OVER interrupt in IC_INTR_STAT register + // 0x00000001 [0] M_RX_UNDER (1) This bit masks the R_RX_UNDER interrupt in IC_INTR_STAT register + io_rw_32 intr_mask; + + _REG_(I2C_IC_RAW_INTR_STAT_OFFSET) // I2C_IC_RAW_INTR_STAT + // I2C Raw Interrupt Status Register + // 0x00001000 [12] RESTART_DET (0) Indicates whether a RESTART condition has occurred on... + // 0x00000800 [11] GEN_CALL (0) Set only when a General Call address is received and it... + // 0x00000400 [10] START_DET (0) Indicates whether a START or RESTART condition has... + // 0x00000200 [9] STOP_DET (0) Indicates whether a STOP condition has occurred on the... + // 0x00000100 [8] ACTIVITY (0) This bit captures DW_apb_i2c activity and stays set... + // 0x00000080 [7] RX_DONE (0) When the DW_apb_i2c is acting as a slave-transmitter,... + // 0x00000040 [6] TX_ABRT (0) This bit indicates if DW_apb_i2c, as an I2C transmitter,... + // 0x00000020 [5] RD_REQ (0) This bit is set to 1 when DW_apb_i2c is acting as a... + // 0x00000010 [4] TX_EMPTY (0) The behavior of the TX_EMPTY interrupt status differs... + // 0x00000008 [3] TX_OVER (0) Set during transmit if the transmit buffer is filled to... + // 0x00000004 [2] RX_FULL (0) Set when the receive buffer reaches or goes above the... + // 0x00000002 [1] RX_OVER (0) Set if the receive buffer is completely filled to... + // 0x00000001 [0] RX_UNDER (0) Set if the processor attempts to read the receive buffer... + io_ro_32 raw_intr_stat; + + _REG_(I2C_IC_RX_TL_OFFSET) // I2C_IC_RX_TL + // I2C Receive FIFO Threshold Register + // 0x000000ff [7:0] RX_TL (0x00) Receive FIFO Threshold Level + io_rw_32 rx_tl; + + _REG_(I2C_IC_TX_TL_OFFSET) // I2C_IC_TX_TL + // I2C Transmit FIFO Threshold Register + // 0x000000ff [7:0] TX_TL (0x00) Transmit FIFO Threshold Level + io_rw_32 tx_tl; + + _REG_(I2C_IC_CLR_INTR_OFFSET) // I2C_IC_CLR_INTR + // Clear Combined and Individual Interrupt Register + // 0x00000001 [0] CLR_INTR (0) Read this register to clear the combined interrupt, all... + io_ro_32 clr_intr; + + _REG_(I2C_IC_CLR_RX_UNDER_OFFSET) // I2C_IC_CLR_RX_UNDER + // Clear RX_UNDER Interrupt Register + // 0x00000001 [0] CLR_RX_UNDER (0) Read this register to clear the RX_UNDER interrupt (bit... + io_ro_32 clr_rx_under; + + _REG_(I2C_IC_CLR_RX_OVER_OFFSET) // I2C_IC_CLR_RX_OVER + // Clear RX_OVER Interrupt Register + // 0x00000001 [0] CLR_RX_OVER (0) Read this register to clear the RX_OVER interrupt (bit... + io_ro_32 clr_rx_over; + + _REG_(I2C_IC_CLR_TX_OVER_OFFSET) // I2C_IC_CLR_TX_OVER + // Clear TX_OVER Interrupt Register + // 0x00000001 [0] CLR_TX_OVER (0) Read this register to clear the TX_OVER interrupt (bit... + io_ro_32 clr_tx_over; + + _REG_(I2C_IC_CLR_RD_REQ_OFFSET) // I2C_IC_CLR_RD_REQ + // Clear RD_REQ Interrupt Register + // 0x00000001 [0] CLR_RD_REQ (0) Read this register to clear the RD_REQ interrupt (bit 5)... + io_ro_32 clr_rd_req; + + _REG_(I2C_IC_CLR_TX_ABRT_OFFSET) // I2C_IC_CLR_TX_ABRT + // Clear TX_ABRT Interrupt Register + // 0x00000001 [0] CLR_TX_ABRT (0) Read this register to clear the TX_ABRT interrupt (bit... + io_ro_32 clr_tx_abrt; + + _REG_(I2C_IC_CLR_RX_DONE_OFFSET) // I2C_IC_CLR_RX_DONE + // Clear RX_DONE Interrupt Register + // 0x00000001 [0] CLR_RX_DONE (0) Read this register to clear the RX_DONE interrupt (bit... + io_ro_32 clr_rx_done; + + _REG_(I2C_IC_CLR_ACTIVITY_OFFSET) // I2C_IC_CLR_ACTIVITY + // Clear ACTIVITY Interrupt Register + // 0x00000001 [0] CLR_ACTIVITY (0) Reading this register clears the ACTIVITY interrupt if... + io_ro_32 clr_activity; + + _REG_(I2C_IC_CLR_STOP_DET_OFFSET) // I2C_IC_CLR_STOP_DET + // Clear STOP_DET Interrupt Register + // 0x00000001 [0] CLR_STOP_DET (0) Read this register to clear the STOP_DET interrupt (bit... + io_ro_32 clr_stop_det; + + _REG_(I2C_IC_CLR_START_DET_OFFSET) // I2C_IC_CLR_START_DET + // Clear START_DET Interrupt Register + // 0x00000001 [0] CLR_START_DET (0) Read this register to clear the START_DET interrupt (bit... + io_ro_32 clr_start_det; + + _REG_(I2C_IC_CLR_GEN_CALL_OFFSET) // I2C_IC_CLR_GEN_CALL + // Clear GEN_CALL Interrupt Register + // 0x00000001 [0] CLR_GEN_CALL (0) Read this register to clear the GEN_CALL interrupt (bit... + io_ro_32 clr_gen_call; + + _REG_(I2C_IC_ENABLE_OFFSET) // I2C_IC_ENABLE + // I2C ENABLE Register + // 0x00000004 [2] TX_CMD_BLOCK (0) In Master mode: - 1'b1: Blocks the transmission of data... + // 0x00000002 [1] ABORT (0) When set, the controller initiates the transfer abort + // 0x00000001 [0] ENABLE (0) Controls whether the DW_apb_i2c is enabled + io_rw_32 enable; + + _REG_(I2C_IC_STATUS_OFFSET) // I2C_IC_STATUS + // I2C STATUS Register + // 0x00000040 [6] SLV_ACTIVITY (0) Slave FSM Activity Status + // 0x00000020 [5] MST_ACTIVITY (0) Master FSM Activity Status + // 0x00000010 [4] RFF (0) Receive FIFO Completely Full + // 0x00000008 [3] RFNE (0) Receive FIFO Not Empty + // 0x00000004 [2] TFE (1) Transmit FIFO Completely Empty + // 0x00000002 [1] TFNF (1) Transmit FIFO Not Full + // 0x00000001 [0] ACTIVITY (0) I2C Activity Status + io_ro_32 status; + + _REG_(I2C_IC_TXFLR_OFFSET) // I2C_IC_TXFLR + // I2C Transmit FIFO Level Register + // 0x0000001f [4:0] TXFLR (0x00) Transmit FIFO Level + io_ro_32 txflr; + + _REG_(I2C_IC_RXFLR_OFFSET) // I2C_IC_RXFLR + // I2C Receive FIFO Level Register + // 0x0000001f [4:0] RXFLR (0x00) Receive FIFO Level + io_ro_32 rxflr; + + _REG_(I2C_IC_SDA_HOLD_OFFSET) // I2C_IC_SDA_HOLD + // I2C SDA Hold Time Length Register + // 0x00ff0000 [23:16] IC_SDA_RX_HOLD (0x00) Sets the required SDA hold time in units of ic_clk... + // 0x0000ffff [15:0] IC_SDA_TX_HOLD (0x0001) Sets the required SDA hold time in units of ic_clk... + io_rw_32 sda_hold; + + _REG_(I2C_IC_TX_ABRT_SOURCE_OFFSET) // I2C_IC_TX_ABRT_SOURCE + // I2C Transmit Abort Source Register + // 0xff800000 [31:23] TX_FLUSH_CNT (0x000) This field indicates the number of Tx FIFO Data Commands... + // 0x00010000 [16] ABRT_USER_ABRT (0) This is a master-mode-only bit + // 0x00008000 [15] ABRT_SLVRD_INTX (0) 1: When the processor side responds to a slave mode... + // 0x00004000 [14] ABRT_SLV_ARBLOST (0) This field indicates that a Slave has lost the bus while... + // 0x00002000 [13] ABRT_SLVFLUSH_TXFIFO (0) This field specifies that the Slave has received a read... + // 0x00001000 [12] ARB_LOST (0) This field specifies that the Master has lost... + // 0x00000800 [11] ABRT_MASTER_DIS (0) This field indicates that the User tries to initiate a... + // 0x00000400 [10] ABRT_10B_RD_NORSTRT (0) This field indicates that the restart is disabled... + // 0x00000200 [9] ABRT_SBYTE_NORSTRT (0) To clear Bit 9, the source of the ABRT_SBYTE_NORSTRT... + // 0x00000100 [8] ABRT_HS_NORSTRT (0) This field indicates that the restart is disabled... + // 0x00000080 [7] ABRT_SBYTE_ACKDET (0) This field indicates that the Master has sent a START... + // 0x00000040 [6] ABRT_HS_ACKDET (0) This field indicates that the Master is in High Speed... + // 0x00000020 [5] ABRT_GCALL_READ (0) This field indicates that DW_apb_i2c in the master mode... + // 0x00000010 [4] ABRT_GCALL_NOACK (0) This field indicates that DW_apb_i2c in master mode has... + // 0x00000008 [3] ABRT_TXDATA_NOACK (0) This field indicates the master-mode only bit + // 0x00000004 [2] ABRT_10ADDR2_NOACK (0) This field indicates that the Master is in 10-bit... + // 0x00000002 [1] ABRT_10ADDR1_NOACK (0) This field indicates that the Master is in 10-bit... + // 0x00000001 [0] ABRT_7B_ADDR_NOACK (0) This field indicates that the Master is in 7-bit... + io_ro_32 tx_abrt_source; + + _REG_(I2C_IC_SLV_DATA_NACK_ONLY_OFFSET) // I2C_IC_SLV_DATA_NACK_ONLY + // Generate Slave Data NACK Register + // 0x00000001 [0] NACK (0) Generate NACK + io_rw_32 slv_data_nack_only; + + _REG_(I2C_IC_DMA_CR_OFFSET) // I2C_IC_DMA_CR + // DMA Control Register + // 0x00000002 [1] TDMAE (0) Transmit DMA Enable + // 0x00000001 [0] RDMAE (0) Receive DMA Enable + io_rw_32 dma_cr; + + _REG_(I2C_IC_DMA_TDLR_OFFSET) // I2C_IC_DMA_TDLR + // DMA Transmit Data Level Register + // 0x0000000f [3:0] DMATDL (0x0) Transmit Data Level + io_rw_32 dma_tdlr; + + _REG_(I2C_IC_DMA_RDLR_OFFSET) // I2C_IC_DMA_RDLR + // DMA Transmit Data Level Register + // 0x0000000f [3:0] DMARDL (0x0) Receive Data Level + io_rw_32 dma_rdlr; + + _REG_(I2C_IC_SDA_SETUP_OFFSET) // I2C_IC_SDA_SETUP + // I2C SDA Setup Register + // 0x000000ff [7:0] SDA_SETUP (0x64) SDA Setup + io_rw_32 sda_setup; + + _REG_(I2C_IC_ACK_GENERAL_CALL_OFFSET) // I2C_IC_ACK_GENERAL_CALL + // I2C ACK General Call Register + // 0x00000001 [0] ACK_GEN_CALL (1) ACK General Call + io_rw_32 ack_general_call; + + _REG_(I2C_IC_ENABLE_STATUS_OFFSET) // I2C_IC_ENABLE_STATUS + // I2C Enable Status Register + // 0x00000004 [2] SLV_RX_DATA_LOST (0) Slave Received Data Lost + // 0x00000002 [1] SLV_DISABLED_WHILE_BUSY (0) Slave Disabled While Busy (Transmit, Receive) + // 0x00000001 [0] IC_EN (0) ic_en Status + io_ro_32 enable_status; + + _REG_(I2C_IC_FS_SPKLEN_OFFSET) // I2C_IC_FS_SPKLEN + // I2C SS, FS or FM+ spike suppression limit + // 0x000000ff [7:0] IC_FS_SPKLEN (0x07) This register must be set before any I2C bus transaction... + io_rw_32 fs_spklen; + + uint32_t _pad2; + + _REG_(I2C_IC_CLR_RESTART_DET_OFFSET) // I2C_IC_CLR_RESTART_DET + // Clear RESTART_DET Interrupt Register + // 0x00000001 [0] CLR_RESTART_DET (0) Read this register to clear the RESTART_DET interrupt... + io_ro_32 clr_restart_det; + + uint32_t _pad3[18]; + + _REG_(I2C_IC_COMP_PARAM_1_OFFSET) // I2C_IC_COMP_PARAM_1 + // Component Parameter Register 1 + // 0x00ff0000 [23:16] TX_BUFFER_DEPTH (0x00) TX Buffer Depth = 16 + // 0x0000ff00 [15:8] RX_BUFFER_DEPTH (0x00) RX Buffer Depth = 16 + // 0x00000080 [7] ADD_ENCODED_PARAMS (0) Encoded parameters not visible + // 0x00000040 [6] HAS_DMA (0) DMA handshaking signals are enabled + // 0x00000020 [5] INTR_IO (0) COMBINED Interrupt outputs + // 0x00000010 [4] HC_COUNT_VALUES (0) Programmable count values for each mode + // 0x0000000c [3:2] MAX_SPEED_MODE (0x0) MAX SPEED MODE = FAST MODE + // 0x00000003 [1:0] APB_DATA_WIDTH (0x0) APB data bus width is 32 bits + io_ro_32 comp_param_1; + + _REG_(I2C_IC_COMP_VERSION_OFFSET) // I2C_IC_COMP_VERSION + // I2C Component Version Register + // 0xffffffff [31:0] IC_COMP_VERSION (0x3230312a) + io_ro_32 comp_version; + + _REG_(I2C_IC_COMP_TYPE_OFFSET) // I2C_IC_COMP_TYPE + // I2C Component Type Register + // 0xffffffff [31:0] IC_COMP_TYPE (0x44570140) Designware Component Type number = 0x44_57_01_40 + io_ro_32 comp_type; +} i2c_hw_t; + +#define i2c0_hw ((i2c_hw_t *)I2C0_BASE) +#define i2c1_hw ((i2c_hw_t *)I2C1_BASE) +static_assert(sizeof (i2c_hw_t) == 0x0100, ""); + +#endif // _HARDWARE_STRUCTS_I2C_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/interp.h b/lib/pico-sdk/rp2040/hardware/structs/interp.h new file mode 100644 index 00000000..abc06843 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/interp.h @@ -0,0 +1,86 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_INTERP_H +#define _HARDWARE_STRUCTS_INTERP_H + +/** + * \file rp2040/interp.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/sio.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_sio +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/sio.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + // (Description copied from array index 0 register SIO_INTERP0_ACCUM0 applies similarly to other array indexes) + _REG_(SIO_INTERP0_ACCUM0_OFFSET) // SIO_INTERP0_ACCUM0 + // Read/write access to accumulator 0 + // 0xffffffff [31:0] INTERP0_ACCUM0 (0x00000000) + io_rw_32 accum[2]; + + // (Description copied from array index 0 register SIO_INTERP0_BASE0 applies similarly to other array indexes) + _REG_(SIO_INTERP0_BASE0_OFFSET) // SIO_INTERP0_BASE0 + // Read/write access to BASE0 register + // 0xffffffff [31:0] INTERP0_BASE0 (0x00000000) + io_rw_32 base[3]; + + // (Description copied from array index 0 register SIO_INTERP0_POP_LANE0 applies similarly to other array indexes) + _REG_(SIO_INTERP0_POP_LANE0_OFFSET) // SIO_INTERP0_POP_LANE0 + // Read LANE0 result, and simultaneously write lane results to both accumulators (POP) + // 0xffffffff [31:0] INTERP0_POP_LANE0 (0x00000000) + io_ro_32 pop[3]; + + // (Description copied from array index 0 register SIO_INTERP0_PEEK_LANE0 applies similarly to other array indexes) + _REG_(SIO_INTERP0_PEEK_LANE0_OFFSET) // SIO_INTERP0_PEEK_LANE0 + // Read LANE0 result, without altering any internal state (PEEK) + // 0xffffffff [31:0] INTERP0_PEEK_LANE0 (0x00000000) + io_ro_32 peek[3]; + + // (Description copied from array index 0 register SIO_INTERP0_CTRL_LANE0 applies similarly to other array indexes) + _REG_(SIO_INTERP0_CTRL_LANE0_OFFSET) // SIO_INTERP0_CTRL_LANE0 + // Control register for lane 0 + // 0x02000000 [25] OVERF (0) Set if either OVERF0 or OVERF1 is set + // 0x01000000 [24] OVERF1 (0) Indicates if any masked-off MSBs in ACCUM1 are set + // 0x00800000 [23] OVERF0 (0) Indicates if any masked-off MSBs in ACCUM0 are set + // 0x00200000 [21] BLEND (0) Only present on INTERP0 on each core + // 0x00180000 [20:19] FORCE_MSB (0x0) ORed into bits 29:28 of the lane result presented to the... + // 0x00040000 [18] ADD_RAW (0) If 1, mask + shift is bypassed for LANE0 result + // 0x00020000 [17] CROSS_RESULT (0) If 1, feed the opposite lane's result into this lane's... + // 0x00010000 [16] CROSS_INPUT (0) If 1, feed the opposite lane's accumulator into this... + // 0x00008000 [15] SIGNED (0) If SIGNED is set, the shifted and masked accumulator... + // 0x00007c00 [14:10] MASK_MSB (0x00) The most-significant bit allowed to pass by the mask... + // 0x000003e0 [9:5] MASK_LSB (0x00) The least-significant bit allowed to pass by the mask (inclusive) + // 0x0000001f [4:0] SHIFT (0x00) Logical right-shift applied to accumulator before masking + io_rw_32 ctrl[2]; + + // (Description copied from array index 0 register SIO_INTERP0_ACCUM0_ADD applies similarly to other array indexes) + _REG_(SIO_INTERP0_ACCUM0_ADD_OFFSET) // SIO_INTERP0_ACCUM0_ADD + // Values written here are atomically added to ACCUM0 + // 0x00ffffff [23:0] INTERP0_ACCUM0_ADD (0x000000) + io_rw_32 add_raw[2]; + + _REG_(SIO_INTERP0_BASE_1AND0_OFFSET) // SIO_INTERP0_BASE_1AND0 + // On write, the lower 16 bits go to BASE0, upper bits to BASE1 simultaneously. + // 0xffffffff [31:0] INTERP0_BASE_1AND0 (0x00000000) + io_wo_32 base01; +} interp_hw_t; + +#define interp_hw_array ((interp_hw_t *)(SIO_BASE + SIO_INTERP0_ACCUM0_OFFSET)) +static_assert(sizeof (interp_hw_t) == 0x0040, ""); +#define interp0_hw (&interp_hw_array[0]) +#define interp1_hw (&interp_hw_array[1]) + +#endif // _HARDWARE_STRUCTS_INTERP_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/io_bank0.h b/lib/pico-sdk/rp2040/hardware/structs/io_bank0.h new file mode 100644 index 00000000..6c09bb04 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/io_bank0.h @@ -0,0 +1,236 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_IO_BANK0_H +#define _HARDWARE_STRUCTS_IO_BANK0_H + +/** + * \file rp2040/io_bank0.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/io_bank0.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_io_bank0 +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/io_bank0.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/** + * \brief GPIO pin function selectors on RP2040 (used as typedef \ref gpio_function_t) + * \ingroup hardware_gpio + */ +typedef enum gpio_function_rp2040 { + GPIO_FUNC_XIP = 0, ///< Select XIP as GPIO pin function + GPIO_FUNC_SPI = 1, ///< Select SPI as GPIO pin function + GPIO_FUNC_UART = 2, ///< Select UART as GPIO pin function + GPIO_FUNC_I2C = 3, ///< Select I2C as GPIO pin function + GPIO_FUNC_PWM = 4, ///< Select PWM as GPIO pin function + GPIO_FUNC_SIO = 5, ///< Select SIO as GPIO pin function + GPIO_FUNC_PIO0 = 6, ///< Select PIO0 as GPIO pin function + GPIO_FUNC_PIO1 = 7, ///< Select PIO1 as GPIO pin function + GPIO_FUNC_GPCK = 8, ///< Select GPCK as GPIO pin function + GPIO_FUNC_USB = 9, ///< Select USB as GPIO pin function + GPIO_FUNC_NULL = 0x1f, ///< Select NULL as GPIO pin function +} gpio_function_t; + +typedef struct { + _REG_(IO_BANK0_GPIO0_STATUS_OFFSET) // IO_BANK0_GPIO0_STATUS + // GPIO status + // 0x04000000 [26] IRQTOPROC (0) interrupt to processors, after override is applied + // 0x01000000 [24] IRQFROMPAD (0) interrupt from pad before override is applied + // 0x00080000 [19] INTOPERI (0) input signal to peripheral, after override is applied + // 0x00020000 [17] INFROMPAD (0) input signal from pad, before override is applied + // 0x00002000 [13] OETOPAD (0) output enable to pad after register override is applied + // 0x00001000 [12] OEFROMPERI (0) output enable from selected peripheral, before register... + // 0x00000200 [9] OUTTOPAD (0) output signal to pad after register override is applied + // 0x00000100 [8] OUTFROMPERI (0) output signal from selected peripheral, before register... + io_ro_32 status; + + _REG_(IO_BANK0_GPIO0_CTRL_OFFSET) // IO_BANK0_GPIO0_CTRL + // GPIO control including function select and overrides + // 0x30000000 [29:28] IRQOVER (0x0) + // 0x00030000 [17:16] INOVER (0x0) + // 0x00003000 [13:12] OEOVER (0x0) + // 0x00000300 [9:8] OUTOVER (0x0) + // 0x0000001f [4:0] FUNCSEL (0x1f) 0-31 -> selects pin function according to the gpio table + + io_rw_32 ctrl; +} io_bank0_status_ctrl_hw_t; + +typedef struct { + // (Description copied from array index 0 register IO_BANK0_PROC0_INTE0 applies similarly to other array indexes) + _REG_(IO_BANK0_PROC0_INTE0_OFFSET) // IO_BANK0_PROC0_INTE0 + // Interrupt Enable for proc0 + // 0x80000000 [31] GPIO7_EDGE_HIGH (0) + // 0x40000000 [30] GPIO7_EDGE_LOW (0) + // 0x20000000 [29] GPIO7_LEVEL_HIGH (0) + // 0x10000000 [28] GPIO7_LEVEL_LOW (0) + // 0x08000000 [27] GPIO6_EDGE_HIGH (0) + // 0x04000000 [26] GPIO6_EDGE_LOW (0) + // 0x02000000 [25] GPIO6_LEVEL_HIGH (0) + // 0x01000000 [24] GPIO6_LEVEL_LOW (0) + // 0x00800000 [23] GPIO5_EDGE_HIGH (0) + // 0x00400000 [22] GPIO5_EDGE_LOW (0) + // 0x00200000 [21] GPIO5_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO5_LEVEL_LOW (0) + // 0x00080000 [19] GPIO4_EDGE_HIGH (0) + // 0x00040000 [18] GPIO4_EDGE_LOW (0) + // 0x00020000 [17] GPIO4_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO4_LEVEL_LOW (0) + // 0x00008000 [15] GPIO3_EDGE_HIGH (0) + // 0x00004000 [14] GPIO3_EDGE_LOW (0) + // 0x00002000 [13] GPIO3_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO3_LEVEL_LOW (0) + // 0x00000800 [11] GPIO2_EDGE_HIGH (0) + // 0x00000400 [10] GPIO2_EDGE_LOW (0) + // 0x00000200 [9] GPIO2_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO2_LEVEL_LOW (0) + // 0x00000080 [7] GPIO1_EDGE_HIGH (0) + // 0x00000040 [6] GPIO1_EDGE_LOW (0) + // 0x00000020 [5] GPIO1_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO1_LEVEL_LOW (0) + // 0x00000008 [3] GPIO0_EDGE_HIGH (0) + // 0x00000004 [2] GPIO0_EDGE_LOW (0) + // 0x00000002 [1] GPIO0_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO0_LEVEL_LOW (0) + io_rw_32 inte[4]; + + // (Description copied from array index 0 register IO_BANK0_PROC0_INTF0 applies similarly to other array indexes) + _REG_(IO_BANK0_PROC0_INTF0_OFFSET) // IO_BANK0_PROC0_INTF0 + // Interrupt Force for proc0 + // 0x80000000 [31] GPIO7_EDGE_HIGH (0) + // 0x40000000 [30] GPIO7_EDGE_LOW (0) + // 0x20000000 [29] GPIO7_LEVEL_HIGH (0) + // 0x10000000 [28] GPIO7_LEVEL_LOW (0) + // 0x08000000 [27] GPIO6_EDGE_HIGH (0) + // 0x04000000 [26] GPIO6_EDGE_LOW (0) + // 0x02000000 [25] GPIO6_LEVEL_HIGH (0) + // 0x01000000 [24] GPIO6_LEVEL_LOW (0) + // 0x00800000 [23] GPIO5_EDGE_HIGH (0) + // 0x00400000 [22] GPIO5_EDGE_LOW (0) + // 0x00200000 [21] GPIO5_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO5_LEVEL_LOW (0) + // 0x00080000 [19] GPIO4_EDGE_HIGH (0) + // 0x00040000 [18] GPIO4_EDGE_LOW (0) + // 0x00020000 [17] GPIO4_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO4_LEVEL_LOW (0) + // 0x00008000 [15] GPIO3_EDGE_HIGH (0) + // 0x00004000 [14] GPIO3_EDGE_LOW (0) + // 0x00002000 [13] GPIO3_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO3_LEVEL_LOW (0) + // 0x00000800 [11] GPIO2_EDGE_HIGH (0) + // 0x00000400 [10] GPIO2_EDGE_LOW (0) + // 0x00000200 [9] GPIO2_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO2_LEVEL_LOW (0) + // 0x00000080 [7] GPIO1_EDGE_HIGH (0) + // 0x00000040 [6] GPIO1_EDGE_LOW (0) + // 0x00000020 [5] GPIO1_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO1_LEVEL_LOW (0) + // 0x00000008 [3] GPIO0_EDGE_HIGH (0) + // 0x00000004 [2] GPIO0_EDGE_LOW (0) + // 0x00000002 [1] GPIO0_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO0_LEVEL_LOW (0) + io_rw_32 intf[4]; + + // (Description copied from array index 0 register IO_BANK0_PROC0_INTS0 applies similarly to other array indexes) + _REG_(IO_BANK0_PROC0_INTS0_OFFSET) // IO_BANK0_PROC0_INTS0 + // Interrupt status after masking & forcing for proc0 + // 0x80000000 [31] GPIO7_EDGE_HIGH (0) + // 0x40000000 [30] GPIO7_EDGE_LOW (0) + // 0x20000000 [29] GPIO7_LEVEL_HIGH (0) + // 0x10000000 [28] GPIO7_LEVEL_LOW (0) + // 0x08000000 [27] GPIO6_EDGE_HIGH (0) + // 0x04000000 [26] GPIO6_EDGE_LOW (0) + // 0x02000000 [25] GPIO6_LEVEL_HIGH (0) + // 0x01000000 [24] GPIO6_LEVEL_LOW (0) + // 0x00800000 [23] GPIO5_EDGE_HIGH (0) + // 0x00400000 [22] GPIO5_EDGE_LOW (0) + // 0x00200000 [21] GPIO5_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO5_LEVEL_LOW (0) + // 0x00080000 [19] GPIO4_EDGE_HIGH (0) + // 0x00040000 [18] GPIO4_EDGE_LOW (0) + // 0x00020000 [17] GPIO4_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO4_LEVEL_LOW (0) + // 0x00008000 [15] GPIO3_EDGE_HIGH (0) + // 0x00004000 [14] GPIO3_EDGE_LOW (0) + // 0x00002000 [13] GPIO3_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO3_LEVEL_LOW (0) + // 0x00000800 [11] GPIO2_EDGE_HIGH (0) + // 0x00000400 [10] GPIO2_EDGE_LOW (0) + // 0x00000200 [9] GPIO2_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO2_LEVEL_LOW (0) + // 0x00000080 [7] GPIO1_EDGE_HIGH (0) + // 0x00000040 [6] GPIO1_EDGE_LOW (0) + // 0x00000020 [5] GPIO1_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO1_LEVEL_LOW (0) + // 0x00000008 [3] GPIO0_EDGE_HIGH (0) + // 0x00000004 [2] GPIO0_EDGE_LOW (0) + // 0x00000002 [1] GPIO0_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO0_LEVEL_LOW (0) + io_ro_32 ints[4]; +} io_bank0_irq_ctrl_hw_t; + +/// \tag::io_bank0_hw[] +typedef struct { + io_bank0_status_ctrl_hw_t io[30]; + + // (Description copied from array index 0 register IO_BANK0_INTR0 applies similarly to other array indexes) + _REG_(IO_BANK0_INTR0_OFFSET) // IO_BANK0_INTR0 + // Raw Interrupts + // 0x80000000 [31] GPIO7_EDGE_HIGH (0) + // 0x40000000 [30] GPIO7_EDGE_LOW (0) + // 0x20000000 [29] GPIO7_LEVEL_HIGH (0) + // 0x10000000 [28] GPIO7_LEVEL_LOW (0) + // 0x08000000 [27] GPIO6_EDGE_HIGH (0) + // 0x04000000 [26] GPIO6_EDGE_LOW (0) + // 0x02000000 [25] GPIO6_LEVEL_HIGH (0) + // 0x01000000 [24] GPIO6_LEVEL_LOW (0) + // 0x00800000 [23] GPIO5_EDGE_HIGH (0) + // 0x00400000 [22] GPIO5_EDGE_LOW (0) + // 0x00200000 [21] GPIO5_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO5_LEVEL_LOW (0) + // 0x00080000 [19] GPIO4_EDGE_HIGH (0) + // 0x00040000 [18] GPIO4_EDGE_LOW (0) + // 0x00020000 [17] GPIO4_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO4_LEVEL_LOW (0) + // 0x00008000 [15] GPIO3_EDGE_HIGH (0) + // 0x00004000 [14] GPIO3_EDGE_LOW (0) + // 0x00002000 [13] GPIO3_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO3_LEVEL_LOW (0) + // 0x00000800 [11] GPIO2_EDGE_HIGH (0) + // 0x00000400 [10] GPIO2_EDGE_LOW (0) + // 0x00000200 [9] GPIO2_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO2_LEVEL_LOW (0) + // 0x00000080 [7] GPIO1_EDGE_HIGH (0) + // 0x00000040 [6] GPIO1_EDGE_LOW (0) + // 0x00000020 [5] GPIO1_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO1_LEVEL_LOW (0) + // 0x00000008 [3] GPIO0_EDGE_HIGH (0) + // 0x00000004 [2] GPIO0_EDGE_LOW (0) + // 0x00000002 [1] GPIO0_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO0_LEVEL_LOW (0) + io_rw_32 intr[4]; + + union { + struct { + io_bank0_irq_ctrl_hw_t proc0_irq_ctrl; + io_bank0_irq_ctrl_hw_t proc1_irq_ctrl; + io_bank0_irq_ctrl_hw_t dormant_wake_irq_ctrl; + }; + io_bank0_irq_ctrl_hw_t irq_ctrl[3]; + }; +} io_bank0_hw_t; +/// \end::io_bank0_hw[] + +#define io_bank0_hw ((io_bank0_hw_t *)IO_BANK0_BASE) +static_assert(sizeof (io_bank0_hw_t) == 0x0190, ""); + +#endif // _HARDWARE_STRUCTS_IO_BANK0_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/io_qspi.h b/lib/pico-sdk/rp2040/hardware/structs/io_qspi.h new file mode 100644 index 00000000..4dca02f5 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/io_qspi.h @@ -0,0 +1,189 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_IO_QSPI_H +#define _HARDWARE_STRUCTS_IO_QSPI_H + +/** + * \file rp2040/io_qspi.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/io_qspi.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_io_qspi +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/io_qspi.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/** + * \brief QSPI pin function selectors on RP2040 (used as typedef \ref gpio_function1_t) + */ +typedef enum gpio_function1_rp2040 { + GPIO_FUNC1_XIP = 0, ///< Select XIP as QSPI pin function + GPIO_FUNC1_SIO = 5, ///< Select SIO as QSPI pin function + GPIO_FUNC1_NULL = 0x1f, ///< Select NULL as QSPI pin function +} gpio_function1_t; + +typedef struct { + _REG_(IO_QSPI_GPIO_QSPI_SCLK_STATUS_OFFSET) // IO_QSPI_GPIO_QSPI_SCLK_STATUS + // GPIO status + // 0x04000000 [26] IRQTOPROC (0) interrupt to processors, after override is applied + // 0x01000000 [24] IRQFROMPAD (0) interrupt from pad before override is applied + // 0x00080000 [19] INTOPERI (0) input signal to peripheral, after override is applied + // 0x00020000 [17] INFROMPAD (0) input signal from pad, before override is applied + // 0x00002000 [13] OETOPAD (0) output enable to pad after register override is applied + // 0x00001000 [12] OEFROMPERI (0) output enable from selected peripheral, before register... + // 0x00000200 [9] OUTTOPAD (0) output signal to pad after register override is applied + // 0x00000100 [8] OUTFROMPERI (0) output signal from selected peripheral, before register... + io_ro_32 status; + + _REG_(IO_QSPI_GPIO_QSPI_SCLK_CTRL_OFFSET) // IO_QSPI_GPIO_QSPI_SCLK_CTRL + // GPIO control including function select and overrides + // 0x30000000 [29:28] IRQOVER (0x0) + // 0x00030000 [17:16] INOVER (0x0) + // 0x00003000 [13:12] OEOVER (0x0) + // 0x00000300 [9:8] OUTOVER (0x0) + // 0x0000001f [4:0] FUNCSEL (0x1f) 0-31 -> selects pin function according to the gpio table + + io_rw_32 ctrl; +} io_qspi_status_ctrl_hw_t; + +typedef struct { + _REG_(IO_QSPI_PROC0_INTE_OFFSET) // IO_QSPI_PROC0_INTE + // Interrupt Enable for proc0 + // 0x00800000 [23] GPIO_QSPI_SD3_EDGE_HIGH (0) + // 0x00400000 [22] GPIO_QSPI_SD3_EDGE_LOW (0) + // 0x00200000 [21] GPIO_QSPI_SD3_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO_QSPI_SD3_LEVEL_LOW (0) + // 0x00080000 [19] GPIO_QSPI_SD2_EDGE_HIGH (0) + // 0x00040000 [18] GPIO_QSPI_SD2_EDGE_LOW (0) + // 0x00020000 [17] GPIO_QSPI_SD2_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO_QSPI_SD2_LEVEL_LOW (0) + // 0x00008000 [15] GPIO_QSPI_SD1_EDGE_HIGH (0) + // 0x00004000 [14] GPIO_QSPI_SD1_EDGE_LOW (0) + // 0x00002000 [13] GPIO_QSPI_SD1_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO_QSPI_SD1_LEVEL_LOW (0) + // 0x00000800 [11] GPIO_QSPI_SD0_EDGE_HIGH (0) + // 0x00000400 [10] GPIO_QSPI_SD0_EDGE_LOW (0) + // 0x00000200 [9] GPIO_QSPI_SD0_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO_QSPI_SD0_LEVEL_LOW (0) + // 0x00000080 [7] GPIO_QSPI_SS_EDGE_HIGH (0) + // 0x00000040 [6] GPIO_QSPI_SS_EDGE_LOW (0) + // 0x00000020 [5] GPIO_QSPI_SS_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO_QSPI_SS_LEVEL_LOW (0) + // 0x00000008 [3] GPIO_QSPI_SCLK_EDGE_HIGH (0) + // 0x00000004 [2] GPIO_QSPI_SCLK_EDGE_LOW (0) + // 0x00000002 [1] GPIO_QSPI_SCLK_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO_QSPI_SCLK_LEVEL_LOW (0) + io_rw_32 inte; + + _REG_(IO_QSPI_PROC0_INTF_OFFSET) // IO_QSPI_PROC0_INTF + // Interrupt Force for proc0 + // 0x00800000 [23] GPIO_QSPI_SD3_EDGE_HIGH (0) + // 0x00400000 [22] GPIO_QSPI_SD3_EDGE_LOW (0) + // 0x00200000 [21] GPIO_QSPI_SD3_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO_QSPI_SD3_LEVEL_LOW (0) + // 0x00080000 [19] GPIO_QSPI_SD2_EDGE_HIGH (0) + // 0x00040000 [18] GPIO_QSPI_SD2_EDGE_LOW (0) + // 0x00020000 [17] GPIO_QSPI_SD2_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO_QSPI_SD2_LEVEL_LOW (0) + // 0x00008000 [15] GPIO_QSPI_SD1_EDGE_HIGH (0) + // 0x00004000 [14] GPIO_QSPI_SD1_EDGE_LOW (0) + // 0x00002000 [13] GPIO_QSPI_SD1_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO_QSPI_SD1_LEVEL_LOW (0) + // 0x00000800 [11] GPIO_QSPI_SD0_EDGE_HIGH (0) + // 0x00000400 [10] GPIO_QSPI_SD0_EDGE_LOW (0) + // 0x00000200 [9] GPIO_QSPI_SD0_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO_QSPI_SD0_LEVEL_LOW (0) + // 0x00000080 [7] GPIO_QSPI_SS_EDGE_HIGH (0) + // 0x00000040 [6] GPIO_QSPI_SS_EDGE_LOW (0) + // 0x00000020 [5] GPIO_QSPI_SS_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO_QSPI_SS_LEVEL_LOW (0) + // 0x00000008 [3] GPIO_QSPI_SCLK_EDGE_HIGH (0) + // 0x00000004 [2] GPIO_QSPI_SCLK_EDGE_LOW (0) + // 0x00000002 [1] GPIO_QSPI_SCLK_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO_QSPI_SCLK_LEVEL_LOW (0) + io_rw_32 intf; + + _REG_(IO_QSPI_PROC0_INTS_OFFSET) // IO_QSPI_PROC0_INTS + // Interrupt status after masking & forcing for proc0 + // 0x00800000 [23] GPIO_QSPI_SD3_EDGE_HIGH (0) + // 0x00400000 [22] GPIO_QSPI_SD3_EDGE_LOW (0) + // 0x00200000 [21] GPIO_QSPI_SD3_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO_QSPI_SD3_LEVEL_LOW (0) + // 0x00080000 [19] GPIO_QSPI_SD2_EDGE_HIGH (0) + // 0x00040000 [18] GPIO_QSPI_SD2_EDGE_LOW (0) + // 0x00020000 [17] GPIO_QSPI_SD2_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO_QSPI_SD2_LEVEL_LOW (0) + // 0x00008000 [15] GPIO_QSPI_SD1_EDGE_HIGH (0) + // 0x00004000 [14] GPIO_QSPI_SD1_EDGE_LOW (0) + // 0x00002000 [13] GPIO_QSPI_SD1_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO_QSPI_SD1_LEVEL_LOW (0) + // 0x00000800 [11] GPIO_QSPI_SD0_EDGE_HIGH (0) + // 0x00000400 [10] GPIO_QSPI_SD0_EDGE_LOW (0) + // 0x00000200 [9] GPIO_QSPI_SD0_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO_QSPI_SD0_LEVEL_LOW (0) + // 0x00000080 [7] GPIO_QSPI_SS_EDGE_HIGH (0) + // 0x00000040 [6] GPIO_QSPI_SS_EDGE_LOW (0) + // 0x00000020 [5] GPIO_QSPI_SS_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO_QSPI_SS_LEVEL_LOW (0) + // 0x00000008 [3] GPIO_QSPI_SCLK_EDGE_HIGH (0) + // 0x00000004 [2] GPIO_QSPI_SCLK_EDGE_LOW (0) + // 0x00000002 [1] GPIO_QSPI_SCLK_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO_QSPI_SCLK_LEVEL_LOW (0) + io_ro_32 ints; +} io_qspi_irq_ctrl_hw_t; + +typedef struct { + io_qspi_status_ctrl_hw_t io[6]; + + _REG_(IO_QSPI_INTR_OFFSET) // IO_QSPI_INTR + // Raw Interrupts + // 0x00800000 [23] GPIO_QSPI_SD3_EDGE_HIGH (0) + // 0x00400000 [22] GPIO_QSPI_SD3_EDGE_LOW (0) + // 0x00200000 [21] GPIO_QSPI_SD3_LEVEL_HIGH (0) + // 0x00100000 [20] GPIO_QSPI_SD3_LEVEL_LOW (0) + // 0x00080000 [19] GPIO_QSPI_SD2_EDGE_HIGH (0) + // 0x00040000 [18] GPIO_QSPI_SD2_EDGE_LOW (0) + // 0x00020000 [17] GPIO_QSPI_SD2_LEVEL_HIGH (0) + // 0x00010000 [16] GPIO_QSPI_SD2_LEVEL_LOW (0) + // 0x00008000 [15] GPIO_QSPI_SD1_EDGE_HIGH (0) + // 0x00004000 [14] GPIO_QSPI_SD1_EDGE_LOW (0) + // 0x00002000 [13] GPIO_QSPI_SD1_LEVEL_HIGH (0) + // 0x00001000 [12] GPIO_QSPI_SD1_LEVEL_LOW (0) + // 0x00000800 [11] GPIO_QSPI_SD0_EDGE_HIGH (0) + // 0x00000400 [10] GPIO_QSPI_SD0_EDGE_LOW (0) + // 0x00000200 [9] GPIO_QSPI_SD0_LEVEL_HIGH (0) + // 0x00000100 [8] GPIO_QSPI_SD0_LEVEL_LOW (0) + // 0x00000080 [7] GPIO_QSPI_SS_EDGE_HIGH (0) + // 0x00000040 [6] GPIO_QSPI_SS_EDGE_LOW (0) + // 0x00000020 [5] GPIO_QSPI_SS_LEVEL_HIGH (0) + // 0x00000010 [4] GPIO_QSPI_SS_LEVEL_LOW (0) + // 0x00000008 [3] GPIO_QSPI_SCLK_EDGE_HIGH (0) + // 0x00000004 [2] GPIO_QSPI_SCLK_EDGE_LOW (0) + // 0x00000002 [1] GPIO_QSPI_SCLK_LEVEL_HIGH (0) + // 0x00000001 [0] GPIO_QSPI_SCLK_LEVEL_LOW (0) + io_rw_32 intr; + + union { + struct { + io_qspi_irq_ctrl_hw_t proc0_irq_ctrl; + io_qspi_irq_ctrl_hw_t proc1_irq_ctrl; + io_qspi_irq_ctrl_hw_t dormant_wake_irq_ctrl; + }; + io_qspi_irq_ctrl_hw_t irq_ctrl[3]; + }; +} io_qspi_hw_t; + +#define io_qspi_hw ((io_qspi_hw_t *)IO_QSPI_BASE) +static_assert(sizeof (io_qspi_hw_t) == 0x0058, ""); + +#endif // _HARDWARE_STRUCTS_IO_QSPI_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/iobank0.h b/lib/pico-sdk/rp2040/hardware/structs/iobank0.h new file mode 100644 index 00000000..2dc31e38 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/iobank0.h @@ -0,0 +1,9 @@ +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// Support old header for compatibility (and if included, support old variable name) +#include "hardware/structs/io_bank0.h" +#define iobank0_hw io_bank0_hw
\ No newline at end of file diff --git a/lib/pico-sdk/rp2040/hardware/structs/ioqspi.h b/lib/pico-sdk/rp2040/hardware/structs/ioqspi.h new file mode 100644 index 00000000..20cc74c7 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/ioqspi.h @@ -0,0 +1,9 @@ +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// Support old header for compatibility (and if included, support old variable name) +#include "hardware/structs/io_qspi.h" +#define ioqspi_hw io_qspi_hw
\ No newline at end of file diff --git a/lib/pico-sdk/rp2040/hardware/structs/m0plus.h b/lib/pico-sdk/rp2040/hardware/structs/m0plus.h new file mode 100644 index 00000000..6d30edec --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/m0plus.h @@ -0,0 +1,197 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_M0PLUS_H +#define _HARDWARE_STRUCTS_M0PLUS_H + +/** + * \file rp2040/m0plus.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + uint32_t _pad0[14340]; + + _REG_(M0PLUS_SYST_CSR_OFFSET) // M0PLUS_SYST_CSR + // SysTick Control and Status Register + // 0x00010000 [16] COUNTFLAG (0) Returns 1 if timer counted to 0 since last time this was read + // 0x00000004 [2] CLKSOURCE (0) SysTick clock source + // 0x00000002 [1] TICKINT (0) Enables SysTick exception request: + + // 0x00000001 [0] ENABLE (0) Enable SysTick counter: + + io_rw_32 syst_csr; + + _REG_(M0PLUS_SYST_RVR_OFFSET) // M0PLUS_SYST_RVR + // SysTick Reload Value Register + // 0x00ffffff [23:0] RELOAD (0x000000) Value to load into the SysTick Current Value Register... + io_rw_32 syst_rvr; + + _REG_(M0PLUS_SYST_CVR_OFFSET) // M0PLUS_SYST_CVR + // SysTick Current Value Register + // 0x00ffffff [23:0] CURRENT (0x000000) Reads return the current value of the SysTick counter + io_rw_32 syst_cvr; + + _REG_(M0PLUS_SYST_CALIB_OFFSET) // M0PLUS_SYST_CALIB + // SysTick Calibration Value Register + // 0x80000000 [31] NOREF (0) If reads as 1, the Reference clock is not provided - the... + // 0x40000000 [30] SKEW (0) If reads as 1, the calibration value for 10ms is inexact... + // 0x00ffffff [23:0] TENMS (0x000000) An optional Reload value to be used for 10ms (100Hz)... + io_ro_32 syst_calib; + + uint32_t _pad1[56]; + + _REG_(M0PLUS_NVIC_ISER_OFFSET) // M0PLUS_NVIC_ISER + // Interrupt Set-Enable Register + // 0xffffffff [31:0] SETENA (0x00000000) Interrupt set-enable bits + io_rw_32 nvic_iser; + + uint32_t _pad2[31]; + + _REG_(M0PLUS_NVIC_ICER_OFFSET) // M0PLUS_NVIC_ICER + // Interrupt Clear-Enable Register + // 0xffffffff [31:0] CLRENA (0x00000000) Interrupt clear-enable bits + io_rw_32 nvic_icer; + + uint32_t _pad3[31]; + + _REG_(M0PLUS_NVIC_ISPR_OFFSET) // M0PLUS_NVIC_ISPR + // Interrupt Set-Pending Register + // 0xffffffff [31:0] SETPEND (0x00000000) Interrupt set-pending bits + io_rw_32 nvic_ispr; + + uint32_t _pad4[31]; + + _REG_(M0PLUS_NVIC_ICPR_OFFSET) // M0PLUS_NVIC_ICPR + // Interrupt Clear-Pending Register + // 0xffffffff [31:0] CLRPEND (0x00000000) Interrupt clear-pending bits + io_rw_32 nvic_icpr; + + uint32_t _pad5[95]; + + // (Description copied from array index 0 register M0PLUS_NVIC_IPR0 applies similarly to other array indexes) + _REG_(M0PLUS_NVIC_IPR0_OFFSET) // M0PLUS_NVIC_IPR0 + // Interrupt Priority Register 0 + // 0xc0000000 [31:30] IP_3 (0x0) Priority of interrupt 3 + // 0x00c00000 [23:22] IP_2 (0x0) Priority of interrupt 2 + // 0x0000c000 [15:14] IP_1 (0x0) Priority of interrupt 1 + // 0x000000c0 [7:6] IP_0 (0x0) Priority of interrupt 0 + io_rw_32 nvic_ipr[8]; + + uint32_t _pad6[568]; + + _REG_(M0PLUS_CPUID_OFFSET) // M0PLUS_CPUID + // CPUID Base Register + // 0xff000000 [31:24] IMPLEMENTER (0x41) Implementor code: 0x41 = ARM + // 0x00f00000 [23:20] VARIANT (0x0) Major revision number n in the rnpm revision status: + + // 0x000f0000 [19:16] ARCHITECTURE (0xc) Constant that defines the architecture of the processor: + + // 0x0000fff0 [15:4] PARTNO (0xc60) Number of processor within family: 0xC60 = Cortex-M0+ + // 0x0000000f [3:0] REVISION (0x1) Minor revision number m in the rnpm revision status: + + io_ro_32 cpuid; + + _REG_(M0PLUS_ICSR_OFFSET) // M0PLUS_ICSR + // Interrupt Control and State Register + // 0x80000000 [31] NMIPENDSET (0) Setting this bit will activate an NMI + // 0x10000000 [28] PENDSVSET (0) PendSV set-pending bit + // 0x08000000 [27] PENDSVCLR (0) PendSV clear-pending bit + // 0x04000000 [26] PENDSTSET (0) SysTick exception set-pending bit + // 0x02000000 [25] PENDSTCLR (0) SysTick exception clear-pending bit + // 0x00800000 [23] ISRPREEMPT (0) The system can only access this bit when the core is halted + // 0x00400000 [22] ISRPENDING (0) External interrupt pending flag + // 0x001ff000 [20:12] VECTPENDING (0x000) Indicates the exception number for the highest priority... + // 0x000001ff [8:0] VECTACTIVE (0x000) Active exception number field + io_rw_32 icsr; + + _REG_(M0PLUS_VTOR_OFFSET) // M0PLUS_VTOR + // Vector Table Offset Register + // 0xffffff00 [31:8] TBLOFF (0x000000) Bits [31:8] of the indicate the vector table offset address + io_rw_32 vtor; + + _REG_(M0PLUS_AIRCR_OFFSET) // M0PLUS_AIRCR + // Application Interrupt and Reset Control Register + // 0xffff0000 [31:16] VECTKEY (0x0000) Register key: + + // 0x00008000 [15] ENDIANESS (0) Data endianness implemented: + + // 0x00000004 [2] SYSRESETREQ (0) Writing 1 to this bit causes the SYSRESETREQ signal to... + // 0x00000002 [1] VECTCLRACTIVE (0) Clears all active state information for fixed and... + io_rw_32 aircr; + + _REG_(M0PLUS_SCR_OFFSET) // M0PLUS_SCR + // System Control Register + // 0x00000010 [4] SEVONPEND (0) Send Event on Pending bit: + + // 0x00000004 [2] SLEEPDEEP (0) Controls whether the processor uses sleep or deep sleep... + // 0x00000002 [1] SLEEPONEXIT (0) Indicates sleep-on-exit when returning from Handler mode... + io_rw_32 scr; + + _REG_(M0PLUS_CCR_OFFSET) // M0PLUS_CCR + // Configuration and Control Register + // 0x00000200 [9] STKALIGN (0) Always reads as one, indicates 8-byte stack alignment on... + // 0x00000008 [3] UNALIGN_TRP (0) Always reads as one, indicates that all unaligned... + io_ro_32 ccr; + + uint32_t _pad7; + + // (Description copied from array index 0 register M0PLUS_SHPR2 applies similarly to other array indexes) + _REG_(M0PLUS_SHPR2_OFFSET) // M0PLUS_SHPR2 + // System Handler Priority Register 2 + // 0xc0000000 [31:30] PRI_11 (0x0) Priority of system handler 11, SVCall + io_rw_32 shpr[2]; + + _REG_(M0PLUS_SHCSR_OFFSET) // M0PLUS_SHCSR + // System Handler Control and State Register + // 0x00008000 [15] SVCALLPENDED (0) Reads as 1 if SVCall is Pending + io_rw_32 shcsr; + + uint32_t _pad8[26]; + + _REG_(M0PLUS_MPU_TYPE_OFFSET) // M0PLUS_MPU_TYPE + // MPU Type Register + // 0x00ff0000 [23:16] IREGION (0x00) Instruction region + // 0x0000ff00 [15:8] DREGION (0x08) Number of regions supported by the MPU + // 0x00000001 [0] SEPARATE (0) Indicates support for separate instruction and data address maps + io_ro_32 mpu_type; + + _REG_(M0PLUS_MPU_CTRL_OFFSET) // M0PLUS_MPU_CTRL + // MPU Control Register + // 0x00000004 [2] PRIVDEFENA (0) Controls whether the default memory map is enabled as a... + // 0x00000002 [1] HFNMIENA (0) Controls the use of the MPU for HardFaults and NMIs + // 0x00000001 [0] ENABLE (0) Enables the MPU + io_rw_32 mpu_ctrl; + + _REG_(M0PLUS_MPU_RNR_OFFSET) // M0PLUS_MPU_RNR + // MPU Region Number Register + // 0x0000000f [3:0] REGION (0x0) Indicates the MPU region referenced by the MPU_RBAR and... + io_rw_32 mpu_rnr; + + _REG_(M0PLUS_MPU_RBAR_OFFSET) // M0PLUS_MPU_RBAR + // MPU Region Base Address Register + // 0xffffff00 [31:8] ADDR (0x000000) Base address of the region + // 0x00000010 [4] VALID (0) On writes, indicates whether the write must update the... + // 0x0000000f [3:0] REGION (0x0) On writes, specifies the number of the region whose base... + io_rw_32 mpu_rbar; + + _REG_(M0PLUS_MPU_RASR_OFFSET) // M0PLUS_MPU_RASR + // MPU Region Attribute and Size Register + // 0xffff0000 [31:16] ATTRS (0x0000) The MPU Region Attribute field + // 0x0000ff00 [15:8] SRD (0x00) Subregion Disable + // 0x0000003e [5:1] SIZE (0x00) Indicates the region size + // 0x00000001 [0] ENABLE (0) Enables the region + io_rw_32 mpu_rasr; +} m0plus_hw_t; + +#define ppb_hw ((m0plus_hw_t *)PPB_BASE) +static_assert(sizeof (m0plus_hw_t) == 0xeda4, ""); + +#endif // _HARDWARE_STRUCTS_M0PLUS_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/mpu.h b/lib/pico-sdk/rp2040/hardware/structs/mpu.h new file mode 100644 index 00000000..766f4d58 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/mpu.h @@ -0,0 +1,66 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_MPU_H +#define _HARDWARE_STRUCTS_MPU_H + +/** + * \file rp2040/mpu.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(M0PLUS_MPU_TYPE_OFFSET) // M0PLUS_MPU_TYPE + // MPU Type Register + // 0x00ff0000 [23:16] IREGION (0x00) Instruction region + // 0x0000ff00 [15:8] DREGION (0x08) Number of regions supported by the MPU + // 0x00000001 [0] SEPARATE (0) Indicates support for separate instruction and data address maps + io_ro_32 type; + + _REG_(M0PLUS_MPU_CTRL_OFFSET) // M0PLUS_MPU_CTRL + // MPU Control Register + // 0x00000004 [2] PRIVDEFENA (0) Controls whether the default memory map is enabled as a... + // 0x00000002 [1] HFNMIENA (0) Controls the use of the MPU for HardFaults and NMIs + // 0x00000001 [0] ENABLE (0) Enables the MPU + io_rw_32 ctrl; + + _REG_(M0PLUS_MPU_RNR_OFFSET) // M0PLUS_MPU_RNR + // MPU Region Number Register + // 0x0000000f [3:0] REGION (0x0) Indicates the MPU region referenced by the MPU_RBAR and... + io_rw_32 rnr; + + _REG_(M0PLUS_MPU_RBAR_OFFSET) // M0PLUS_MPU_RBAR + // MPU Region Base Address Register + // 0xffffff00 [31:8] ADDR (0x000000) Base address of the region + // 0x00000010 [4] VALID (0) On writes, indicates whether the write must update the... + // 0x0000000f [3:0] REGION (0x0) On writes, specifies the number of the region whose base... + io_rw_32 rbar; + + _REG_(M0PLUS_MPU_RASR_OFFSET) // M0PLUS_MPU_RASR + // MPU Region Attribute and Size Register + // 0xffff0000 [31:16] ATTRS (0x0000) The MPU Region Attribute field + // 0x0000ff00 [15:8] SRD (0x00) Subregion Disable + // 0x0000003e [5:1] SIZE (0x00) Indicates the region size + // 0x00000001 [0] ENABLE (0) Enables the region + io_rw_32 rasr; +} mpu_hw_t; + +#define mpu_hw ((mpu_hw_t *)(PPB_BASE + M0PLUS_MPU_TYPE_OFFSET)) +static_assert(sizeof (mpu_hw_t) == 0x0014, ""); + +#endif // _HARDWARE_STRUCTS_MPU_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/nvic.h b/lib/pico-sdk/rp2040/hardware/structs/nvic.h new file mode 100644 index 00000000..d09ebd19 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/nvic.h @@ -0,0 +1,69 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_NVIC_H +#define _HARDWARE_STRUCTS_NVIC_H + +/** + * \file rp2040/nvic.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(M0PLUS_NVIC_ISER_OFFSET) // M0PLUS_NVIC_ISER + // Interrupt Set-Enable Register + // 0xffffffff [31:0] SETENA (0x00000000) Interrupt set-enable bits + io_rw_32 iser; + + uint32_t _pad0[31]; + + _REG_(M0PLUS_NVIC_ICER_OFFSET) // M0PLUS_NVIC_ICER + // Interrupt Clear-Enable Register + // 0xffffffff [31:0] CLRENA (0x00000000) Interrupt clear-enable bits + io_rw_32 icer; + + uint32_t _pad1[31]; + + _REG_(M0PLUS_NVIC_ISPR_OFFSET) // M0PLUS_NVIC_ISPR + // Interrupt Set-Pending Register + // 0xffffffff [31:0] SETPEND (0x00000000) Interrupt set-pending bits + io_rw_32 ispr; + + uint32_t _pad2[31]; + + _REG_(M0PLUS_NVIC_ICPR_OFFSET) // M0PLUS_NVIC_ICPR + // Interrupt Clear-Pending Register + // 0xffffffff [31:0] CLRPEND (0x00000000) Interrupt clear-pending bits + io_rw_32 icpr; + + uint32_t _pad3[95]; + + // (Description copied from array index 0 register M0PLUS_NVIC_IPR0 applies similarly to other array indexes) + _REG_(M0PLUS_NVIC_IPR0_OFFSET) // M0PLUS_NVIC_IPR0 + // Interrupt Priority Register 0 + // 0xc0000000 [31:30] IP_3 (0x0) Priority of interrupt 3 + // 0x00c00000 [23:22] IP_2 (0x0) Priority of interrupt 2 + // 0x0000c000 [15:14] IP_1 (0x0) Priority of interrupt 1 + // 0x000000c0 [7:6] IP_0 (0x0) Priority of interrupt 0 + io_rw_32 ipr[8]; +} nvic_hw_t; + +#define nvic_hw ((nvic_hw_t *)(PPB_BASE + M0PLUS_NVIC_ISER_OFFSET)) +static_assert(sizeof (nvic_hw_t) == 0x0320, ""); + +#endif // _HARDWARE_STRUCTS_NVIC_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/pads_bank0.h b/lib/pico-sdk/rp2040/hardware/structs/pads_bank0.h new file mode 100644 index 00000000..f00c70af --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/pads_bank0.h @@ -0,0 +1,49 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PADS_BANK0_H +#define _HARDWARE_STRUCTS_PADS_BANK0_H + +/** + * \file rp2040/pads_bank0.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/pads_bank0.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pads_bank0 +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/pads_bank0.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(PADS_BANK0_VOLTAGE_SELECT_OFFSET) // PADS_BANK0_VOLTAGE_SELECT + // Voltage select + // 0x00000001 [0] VOLTAGE_SELECT (0) + io_rw_32 voltage_select; + + // (Description copied from array index 0 register PADS_BANK0_GPIO0 applies similarly to other array indexes) + _REG_(PADS_BANK0_GPIO0_OFFSET) // PADS_BANK0_GPIO0 + // Pad control register + // 0x00000080 [7] OD (0) Output disable + // 0x00000040 [6] IE (1) Input enable + // 0x00000030 [5:4] DRIVE (0x1) Drive strength + // 0x00000008 [3] PUE (0) Pull up enable + // 0x00000004 [2] PDE (1) Pull down enable + // 0x00000002 [1] SCHMITT (1) Enable schmitt trigger + // 0x00000001 [0] SLEWFAST (0) Slew rate control + io_rw_32 io[30]; +} pads_bank0_hw_t; + +#define pads_bank0_hw ((pads_bank0_hw_t *)PADS_BANK0_BASE) +static_assert(sizeof (pads_bank0_hw_t) == 0x007c, ""); + +#endif // _HARDWARE_STRUCTS_PADS_BANK0_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/pads_qspi.h b/lib/pico-sdk/rp2040/hardware/structs/pads_qspi.h new file mode 100644 index 00000000..66b6c1a1 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/pads_qspi.h @@ -0,0 +1,49 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PADS_QSPI_H +#define _HARDWARE_STRUCTS_PADS_QSPI_H + +/** + * \file rp2040/pads_qspi.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/pads_qspi.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pads_qspi +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/pads_qspi.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(PADS_QSPI_VOLTAGE_SELECT_OFFSET) // PADS_QSPI_VOLTAGE_SELECT + // Voltage select + // 0x00000001 [0] VOLTAGE_SELECT (0) + io_rw_32 voltage_select; + + // (Description copied from array index 0 register PADS_QSPI_GPIO_QSPI_SCLK applies similarly to other array indexes) + _REG_(PADS_QSPI_GPIO_QSPI_SCLK_OFFSET) // PADS_QSPI_GPIO_QSPI_SCLK + // Pad control register + // 0x00000080 [7] OD (0) Output disable + // 0x00000040 [6] IE (1) Input enable + // 0x00000030 [5:4] DRIVE (0x1) Drive strength + // 0x00000008 [3] PUE (0) Pull up enable + // 0x00000004 [2] PDE (1) Pull down enable + // 0x00000002 [1] SCHMITT (1) Enable schmitt trigger + // 0x00000001 [0] SLEWFAST (0) Slew rate control + io_rw_32 io[6]; +} pads_qspi_hw_t; + +#define pads_qspi_hw ((pads_qspi_hw_t *)PADS_QSPI_BASE) +static_assert(sizeof (pads_qspi_hw_t) == 0x001c, ""); + +#endif // _HARDWARE_STRUCTS_PADS_QSPI_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/padsbank0.h b/lib/pico-sdk/rp2040/hardware/structs/padsbank0.h new file mode 100644 index 00000000..cb14e792 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/padsbank0.h @@ -0,0 +1,9 @@ +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// Support old header for compatibility (and if included, support old variable name) +#include "hardware/structs/pads_bank0.h" +#define padsbank0_hw pads_bank0_hw
\ No newline at end of file diff --git a/lib/pico-sdk/rp2040/hardware/structs/pio.h b/lib/pico-sdk/rp2040/hardware/structs/pio.h new file mode 100644 index 00000000..bceb14a7 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/pio.h @@ -0,0 +1,343 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PIO_H +#define _HARDWARE_STRUCTS_PIO_H + +/** + * \file rp2040/pio.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/pio.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pio +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/pio.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(PIO_SM0_CLKDIV_OFFSET) // PIO_SM0_CLKDIV + // Clock divisor register for state machine 0 + + // 0xffff0000 [31:16] INT (0x0001) Effective frequency is sysclk/(int + frac/256) + // 0x0000ff00 [15:8] FRAC (0x00) Fractional part of clock divisor + io_rw_32 clkdiv; + + _REG_(PIO_SM0_EXECCTRL_OFFSET) // PIO_SM0_EXECCTRL + // Execution/behavioural settings for state machine 0 + // 0x80000000 [31] EXEC_STALLED (0) If 1, an instruction written to SMx_INSTR is stalled,... + // 0x40000000 [30] SIDE_EN (0) If 1, the MSB of the Delay/Side-set instruction field is... + // 0x20000000 [29] SIDE_PINDIR (0) If 1, side-set data is asserted to pin directions,... + // 0x1f000000 [28:24] JMP_PIN (0x00) The GPIO number to use as condition for JMP PIN + // 0x00f80000 [23:19] OUT_EN_SEL (0x00) Which data bit to use for inline OUT enable + // 0x00040000 [18] INLINE_OUT_EN (0) If 1, use a bit of OUT data as an auxiliary write enable + + // 0x00020000 [17] OUT_STICKY (0) Continuously assert the most recent OUT/SET to the pins + // 0x0001f000 [16:12] WRAP_TOP (0x1f) After reaching this address, execution is wrapped to wrap_bottom + // 0x00000f80 [11:7] WRAP_BOTTOM (0x00) After reaching wrap_top, execution is wrapped to this address + // 0x00000010 [4] STATUS_SEL (0) Comparison used for the MOV x, STATUS instruction + // 0x0000000f [3:0] STATUS_N (0x0) Comparison level for the MOV x, STATUS instruction + io_rw_32 execctrl; + + _REG_(PIO_SM0_SHIFTCTRL_OFFSET) // PIO_SM0_SHIFTCTRL + // Control behaviour of the input/output shift registers for state machine 0 + // 0x80000000 [31] FJOIN_RX (0) When 1, RX FIFO steals the TX FIFO's storage, and... + // 0x40000000 [30] FJOIN_TX (0) When 1, TX FIFO steals the RX FIFO's storage, and... + // 0x3e000000 [29:25] PULL_THRESH (0x00) Number of bits shifted out of OSR before autopull, or... + // 0x01f00000 [24:20] PUSH_THRESH (0x00) Number of bits shifted into ISR before autopush, or... + // 0x00080000 [19] OUT_SHIFTDIR (1) 1 = shift out of output shift register to right + // 0x00040000 [18] IN_SHIFTDIR (1) 1 = shift input shift register to right (data enters from left) + // 0x00020000 [17] AUTOPULL (0) Pull automatically when the output shift register is emptied, i + // 0x00010000 [16] AUTOPUSH (0) Push automatically when the input shift register is filled, i + io_rw_32 shiftctrl; + + _REG_(PIO_SM0_ADDR_OFFSET) // PIO_SM0_ADDR + // Current instruction address of state machine 0 + // 0x0000001f [4:0] SM0_ADDR (0x00) + io_ro_32 addr; + + _REG_(PIO_SM0_INSTR_OFFSET) // PIO_SM0_INSTR + // Read to see the instruction currently addressed by state machine 0's program counter + + // 0x0000ffff [15:0] SM0_INSTR (-) + io_rw_32 instr; + + _REG_(PIO_SM0_PINCTRL_OFFSET) // PIO_SM0_PINCTRL + // State machine pin control + // 0xe0000000 [31:29] SIDESET_COUNT (0x0) The number of MSBs of the Delay/Side-set instruction... + // 0x1c000000 [28:26] SET_COUNT (0x5) The number of pins asserted by a SET + // 0x03f00000 [25:20] OUT_COUNT (0x00) The number of pins asserted by an OUT PINS, OUT PINDIRS... + // 0x000f8000 [19:15] IN_BASE (0x00) The pin which is mapped to the least-significant bit of... + // 0x00007c00 [14:10] SIDESET_BASE (0x00) The lowest-numbered pin that will be affected by a... + // 0x000003e0 [9:5] SET_BASE (0x00) The lowest-numbered pin that will be affected by a SET... + // 0x0000001f [4:0] OUT_BASE (0x00) The lowest-numbered pin that will be affected by an OUT... + io_rw_32 pinctrl; +} pio_sm_hw_t; + +typedef struct { + _REG_(PIO_IRQ0_INTE_OFFSET) // PIO_IRQ0_INTE + // Interrupt Enable for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 inte; + + _REG_(PIO_IRQ0_INTF_OFFSET) // PIO_IRQ0_INTF + // Interrupt Force for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 intf; + + _REG_(PIO_IRQ0_INTS_OFFSET) // PIO_IRQ0_INTS + // Interrupt status after masking & forcing for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_ro_32 ints; +} pio_irq_ctrl_hw_t; + +typedef struct { + _REG_(PIO_CTRL_OFFSET) // PIO_CTRL + // PIO control register + // 0x00000f00 [11:8] CLKDIV_RESTART (0x0) Restart a state machine's clock divider from an initial... + // 0x000000f0 [7:4] SM_RESTART (0x0) Write 1 to instantly clear internal SM state which may... + // 0x0000000f [3:0] SM_ENABLE (0x0) Enable/disable each of the four state machines by... + io_rw_32 ctrl; + + _REG_(PIO_FSTAT_OFFSET) // PIO_FSTAT + // FIFO status register + // 0x0f000000 [27:24] TXEMPTY (0xf) State machine TX FIFO is empty + // 0x000f0000 [19:16] TXFULL (0x0) State machine TX FIFO is full + // 0x00000f00 [11:8] RXEMPTY (0xf) State machine RX FIFO is empty + // 0x0000000f [3:0] RXFULL (0x0) State machine RX FIFO is full + io_ro_32 fstat; + + _REG_(PIO_FDEBUG_OFFSET) // PIO_FDEBUG + // FIFO debug register + // 0x0f000000 [27:24] TXSTALL (0x0) State machine has stalled on empty TX FIFO during a... + // 0x000f0000 [19:16] TXOVER (0x0) TX FIFO overflow (i + // 0x00000f00 [11:8] RXUNDER (0x0) RX FIFO underflow (i + // 0x0000000f [3:0] RXSTALL (0x0) State machine has stalled on full RX FIFO during a... + io_rw_32 fdebug; + + _REG_(PIO_FLEVEL_OFFSET) // PIO_FLEVEL + // FIFO levels + // 0xf0000000 [31:28] RX3 (0x0) + // 0x0f000000 [27:24] TX3 (0x0) + // 0x00f00000 [23:20] RX2 (0x0) + // 0x000f0000 [19:16] TX2 (0x0) + // 0x0000f000 [15:12] RX1 (0x0) + // 0x00000f00 [11:8] TX1 (0x0) + // 0x000000f0 [7:4] RX0 (0x0) + // 0x0000000f [3:0] TX0 (0x0) + io_ro_32 flevel; + + // (Description copied from array index 0 register PIO_TXF0 applies similarly to other array indexes) + _REG_(PIO_TXF0_OFFSET) // PIO_TXF0 + // Direct write access to the TX FIFO for this state machine + // 0xffffffff [31:0] TXF0 (0x00000000) + io_wo_32 txf[4]; + + // (Description copied from array index 0 register PIO_RXF0 applies similarly to other array indexes) + _REG_(PIO_RXF0_OFFSET) // PIO_RXF0 + // Direct read access to the RX FIFO for this state machine + // 0xffffffff [31:0] RXF0 (-) + io_ro_32 rxf[4]; + + _REG_(PIO_IRQ_OFFSET) // PIO_IRQ + // State machine IRQ flags register + // 0x000000ff [7:0] IRQ (0x00) + io_rw_32 irq; + + _REG_(PIO_IRQ_FORCE_OFFSET) // PIO_IRQ_FORCE + // Writing a 1 to each of these bits will forcibly assert the corresponding IRQ + // 0x000000ff [7:0] IRQ_FORCE (0x00) + io_wo_32 irq_force; + + _REG_(PIO_INPUT_SYNC_BYPASS_OFFSET) // PIO_INPUT_SYNC_BYPASS + // There is a 2-flipflop synchronizer on each GPIO input, which protects PIO logic from metastabilities + // 0xffffffff [31:0] INPUT_SYNC_BYPASS (0x00000000) + io_rw_32 input_sync_bypass; + + _REG_(PIO_DBG_PADOUT_OFFSET) // PIO_DBG_PADOUT + // Read to sample the pad output values PIO is currently driving to the GPIOs + // 0xffffffff [31:0] DBG_PADOUT (0x00000000) + io_ro_32 dbg_padout; + + _REG_(PIO_DBG_PADOE_OFFSET) // PIO_DBG_PADOE + // Read to sample the pad output enables (direction) PIO is currently driving to the GPIOs + // 0xffffffff [31:0] DBG_PADOE (0x00000000) + io_ro_32 dbg_padoe; + + _REG_(PIO_DBG_CFGINFO_OFFSET) // PIO_DBG_CFGINFO + // The PIO hardware has some free parameters that may vary between chip products + // 0x003f0000 [21:16] IMEM_SIZE (-) The size of the instruction memory, measured in units of... + // 0x00000f00 [11:8] SM_COUNT (-) The number of state machines this PIO instance is equipped with + // 0x0000003f [5:0] FIFO_DEPTH (-) The depth of the state machine TX/RX FIFOs, measured in words + io_ro_32 dbg_cfginfo; + + // (Description copied from array index 0 register PIO_INSTR_MEM0 applies similarly to other array indexes) + _REG_(PIO_INSTR_MEM0_OFFSET) // PIO_INSTR_MEM0 + // Write-only access to instruction memory location 0 + // 0x0000ffff [15:0] INSTR_MEM0 (0x0000) + io_wo_32 instr_mem[32]; + + pio_sm_hw_t sm[4]; + + _REG_(PIO_INTR_OFFSET) // PIO_INTR + // Raw Interrupts + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_ro_32 intr; + + union { + struct { + _REG_(PIO_IRQ0_INTE_OFFSET) // PIO_IRQ0_INTE + // Interrupt Enable for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 inte0; + + _REG_(PIO_IRQ0_INTF_OFFSET) // PIO_IRQ0_INTF + // Interrupt Force for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 intf0; + + _REG_(PIO_IRQ0_INTS_OFFSET) // PIO_IRQ0_INTS + // Interrupt status after masking & forcing for irq0 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_ro_32 ints0; + + _REG_(PIO_IRQ1_INTE_OFFSET) // PIO_IRQ1_INTE + // Interrupt Enable for irq1 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 inte1; + + _REG_(PIO_IRQ1_INTF_OFFSET) // PIO_IRQ1_INTF + // Interrupt Force for irq1 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_rw_32 intf1; + + _REG_(PIO_IRQ1_INTS_OFFSET) // PIO_IRQ1_INTS + // Interrupt status after masking & forcing for irq1 + // 0x00000800 [11] SM3 (0) + // 0x00000400 [10] SM2 (0) + // 0x00000200 [9] SM1 (0) + // 0x00000100 [8] SM0 (0) + // 0x00000080 [7] SM3_TXNFULL (0) + // 0x00000040 [6] SM2_TXNFULL (0) + // 0x00000020 [5] SM1_TXNFULL (0) + // 0x00000010 [4] SM0_TXNFULL (0) + // 0x00000008 [3] SM3_RXNEMPTY (0) + // 0x00000004 [2] SM2_RXNEMPTY (0) + // 0x00000002 [1] SM1_RXNEMPTY (0) + // 0x00000001 [0] SM0_RXNEMPTY (0) + io_ro_32 ints1; + }; + pio_irq_ctrl_hw_t irq_ctrl[2]; + }; +} pio_hw_t; + +#define pio0_hw ((pio_hw_t *)PIO0_BASE) +#define pio1_hw ((pio_hw_t *)PIO1_BASE) +static_assert(sizeof (pio_hw_t) == 0x0144, ""); + +#endif // _HARDWARE_STRUCTS_PIO_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/pll.h b/lib/pico-sdk/rp2040/hardware/structs/pll.h new file mode 100644 index 00000000..7d3ccc82 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/pll.h @@ -0,0 +1,61 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PLL_H +#define _HARDWARE_STRUCTS_PLL_H + +/** + * \file rp2040/pll.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/pll.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pll +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/pll.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/// \tag::pll_hw[] +typedef struct { + _REG_(PLL_CS_OFFSET) // PLL_CS + // Control and Status + // 0x80000000 [31] LOCK (0) PLL is locked + // 0x00000100 [8] BYPASS (0) Passes the reference clock to the output instead of the... + // 0x0000003f [5:0] REFDIV (0x01) Divides the PLL input reference clock + io_rw_32 cs; + + _REG_(PLL_PWR_OFFSET) // PLL_PWR + // Controls the PLL power modes + // 0x00000020 [5] VCOPD (1) PLL VCO powerdown + + // 0x00000008 [3] POSTDIVPD (1) PLL post divider powerdown + + // 0x00000004 [2] DSMPD (1) PLL DSM powerdown + + // 0x00000001 [0] PD (1) PLL powerdown + + io_rw_32 pwr; + + _REG_(PLL_FBDIV_INT_OFFSET) // PLL_FBDIV_INT + // Feedback divisor + // 0x00000fff [11:0] FBDIV_INT (0x000) see ctrl reg description for constraints + io_rw_32 fbdiv_int; + + _REG_(PLL_PRIM_OFFSET) // PLL_PRIM + // Controls the PLL post dividers for the primary output + // 0x00070000 [18:16] POSTDIV1 (0x7) divide by 1-7 + // 0x00007000 [14:12] POSTDIV2 (0x7) divide by 1-7 + io_rw_32 prim; +} pll_hw_t; +/// \end::pll_hw[] + +#define pll_sys_hw ((pll_hw_t *)PLL_SYS_BASE) +#define pll_usb_hw ((pll_hw_t *)PLL_USB_BASE) +static_assert(sizeof (pll_hw_t) == 0x0010, ""); + +#endif // _HARDWARE_STRUCTS_PLL_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/psm.h b/lib/pico-sdk/rp2040/hardware/structs/psm.h new file mode 100644 index 00000000..74ccaf32 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/psm.h @@ -0,0 +1,116 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PSM_H +#define _HARDWARE_STRUCTS_PSM_H + +/** + * \file rp2040/psm.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/psm.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_psm +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/psm.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(PSM_FRCE_ON_OFFSET) // PSM_FRCE_ON + // Force block out of reset (i + // 0x00010000 [16] PROC1 (0) + // 0x00008000 [15] PROC0 (0) + // 0x00004000 [14] SIO (0) + // 0x00002000 [13] VREG_AND_CHIP_RESET (0) + // 0x00001000 [12] XIP (0) + // 0x00000800 [11] SRAM5 (0) + // 0x00000400 [10] SRAM4 (0) + // 0x00000200 [9] SRAM3 (0) + // 0x00000100 [8] SRAM2 (0) + // 0x00000080 [7] SRAM1 (0) + // 0x00000040 [6] SRAM0 (0) + // 0x00000020 [5] ROM (0) + // 0x00000010 [4] BUSFABRIC (0) + // 0x00000008 [3] RESETS (0) + // 0x00000004 [2] CLOCKS (0) + // 0x00000002 [1] XOSC (0) + // 0x00000001 [0] ROSC (0) + io_rw_32 frce_on; + + _REG_(PSM_FRCE_OFF_OFFSET) // PSM_FRCE_OFF + // Force into reset (i + // 0x00010000 [16] PROC1 (0) + // 0x00008000 [15] PROC0 (0) + // 0x00004000 [14] SIO (0) + // 0x00002000 [13] VREG_AND_CHIP_RESET (0) + // 0x00001000 [12] XIP (0) + // 0x00000800 [11] SRAM5 (0) + // 0x00000400 [10] SRAM4 (0) + // 0x00000200 [9] SRAM3 (0) + // 0x00000100 [8] SRAM2 (0) + // 0x00000080 [7] SRAM1 (0) + // 0x00000040 [6] SRAM0 (0) + // 0x00000020 [5] ROM (0) + // 0x00000010 [4] BUSFABRIC (0) + // 0x00000008 [3] RESETS (0) + // 0x00000004 [2] CLOCKS (0) + // 0x00000002 [1] XOSC (0) + // 0x00000001 [0] ROSC (0) + io_rw_32 frce_off; + + _REG_(PSM_WDSEL_OFFSET) // PSM_WDSEL + // Set to 1 if this peripheral should be reset when the watchdog fires + // 0x00010000 [16] PROC1 (0) + // 0x00008000 [15] PROC0 (0) + // 0x00004000 [14] SIO (0) + // 0x00002000 [13] VREG_AND_CHIP_RESET (0) + // 0x00001000 [12] XIP (0) + // 0x00000800 [11] SRAM5 (0) + // 0x00000400 [10] SRAM4 (0) + // 0x00000200 [9] SRAM3 (0) + // 0x00000100 [8] SRAM2 (0) + // 0x00000080 [7] SRAM1 (0) + // 0x00000040 [6] SRAM0 (0) + // 0x00000020 [5] ROM (0) + // 0x00000010 [4] BUSFABRIC (0) + // 0x00000008 [3] RESETS (0) + // 0x00000004 [2] CLOCKS (0) + // 0x00000002 [1] XOSC (0) + // 0x00000001 [0] ROSC (0) + io_rw_32 wdsel; + + _REG_(PSM_DONE_OFFSET) // PSM_DONE + // Indicates the peripheral's registers are ready to access + // 0x00010000 [16] PROC1 (0) + // 0x00008000 [15] PROC0 (0) + // 0x00004000 [14] SIO (0) + // 0x00002000 [13] VREG_AND_CHIP_RESET (0) + // 0x00001000 [12] XIP (0) + // 0x00000800 [11] SRAM5 (0) + // 0x00000400 [10] SRAM4 (0) + // 0x00000200 [9] SRAM3 (0) + // 0x00000100 [8] SRAM2 (0) + // 0x00000080 [7] SRAM1 (0) + // 0x00000040 [6] SRAM0 (0) + // 0x00000020 [5] ROM (0) + // 0x00000010 [4] BUSFABRIC (0) + // 0x00000008 [3] RESETS (0) + // 0x00000004 [2] CLOCKS (0) + // 0x00000002 [1] XOSC (0) + // 0x00000001 [0] ROSC (0) + io_ro_32 done; +} psm_hw_t; + +#define psm_hw ((psm_hw_t *)PSM_BASE) +static_assert(sizeof (psm_hw_t) == 0x0010, ""); + +#endif // _HARDWARE_STRUCTS_PSM_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/pwm.h b/lib/pico-sdk/rp2040/hardware/structs/pwm.h new file mode 100644 index 00000000..3eedee4d --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/pwm.h @@ -0,0 +1,172 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_PWM_H +#define _HARDWARE_STRUCTS_PWM_H + +/** + * \file rp2040/pwm.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/pwm.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_pwm +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/pwm.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(PWM_CH0_CSR_OFFSET) // PWM_CH0_CSR + // Control and status register + // 0x00000080 [7] PH_ADV (0) Advance the phase of the counter by 1 count, while it is running + // 0x00000040 [6] PH_RET (0) Retard the phase of the counter by 1 count, while it is running + // 0x00000030 [5:4] DIVMODE (0x0) + // 0x00000008 [3] B_INV (0) Invert output B + // 0x00000004 [2] A_INV (0) Invert output A + // 0x00000002 [1] PH_CORRECT (0) 1: Enable phase-correct modulation + // 0x00000001 [0] EN (0) Enable the PWM channel + io_rw_32 csr; + + _REG_(PWM_CH0_DIV_OFFSET) // PWM_CH0_DIV + // INT and FRAC form a fixed-point fractional number + // 0x00000ff0 [11:4] INT (0x01) + // 0x0000000f [3:0] FRAC (0x0) + io_rw_32 div; + + _REG_(PWM_CH0_CTR_OFFSET) // PWM_CH0_CTR + // Direct access to the PWM counter + // 0x0000ffff [15:0] CH0_CTR (0x0000) + io_rw_32 ctr; + + _REG_(PWM_CH0_CC_OFFSET) // PWM_CH0_CC + // Counter compare values + // 0xffff0000 [31:16] B (0x0000) + // 0x0000ffff [15:0] A (0x0000) + io_rw_32 cc; + + _REG_(PWM_CH0_TOP_OFFSET) // PWM_CH0_TOP + // Counter wrap value + // 0x0000ffff [15:0] CH0_TOP (0xffff) + io_rw_32 top; +} pwm_slice_hw_t; + +typedef struct { + _REG_(PWM_INTE_OFFSET) // PWM_INTE + // Interrupt Enable + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 inte; + + _REG_(PWM_INTF_OFFSET) // PWM_INTF + // Interrupt Force + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 intf; + + _REG_(PWM_INTS_OFFSET) // PWM_INTS + // Interrupt status after masking & forcing + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_ro_32 ints; +} pwm_irq_ctrl_hw_t; + +typedef struct { + pwm_slice_hw_t slice[8]; + + _REG_(PWM_EN_OFFSET) // PWM_EN + // This register aliases the CSR_EN bits for all channels + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 en; + + _REG_(PWM_INTR_OFFSET) // PWM_INTR + // Raw Interrupts + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 intr; + + union { + struct { + _REG_(PWM_INTE_OFFSET) // PWM_INTE + // Interrupt Enable + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 inte; + + _REG_(PWM_INTF_OFFSET) // PWM_INTF + // Interrupt Force + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 intf; + + _REG_(PWM_INTS_OFFSET) // PWM_INTS + // Interrupt status after masking & forcing + // 0x00000080 [7] CH7 (0) + // 0x00000040 [6] CH6 (0) + // 0x00000020 [5] CH5 (0) + // 0x00000010 [4] CH4 (0) + // 0x00000008 [3] CH3 (0) + // 0x00000004 [2] CH2 (0) + // 0x00000002 [1] CH1 (0) + // 0x00000001 [0] CH0 (0) + io_rw_32 ints; + }; + pwm_irq_ctrl_hw_t irq_ctrl[1]; + }; +} pwm_hw_t; + +#define pwm_hw ((pwm_hw_t *)PWM_BASE) +static_assert(sizeof (pwm_hw_t) == 0x00b4, ""); + +#endif // _HARDWARE_STRUCTS_PWM_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/resets.h b/lib/pico-sdk/rp2040/hardware/structs/resets.h new file mode 100644 index 00000000..ca3a6297 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/resets.h @@ -0,0 +1,153 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_RESETS_H +#define _HARDWARE_STRUCTS_RESETS_H + +/** + * \file rp2040/resets.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/resets.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_resets +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/resets.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/** \brief Resettable component numbers on RP2040 (used as typedef \ref reset_num_t) + * \ingroup hardware_resets + */ +typedef enum reset_num_rp2040 { + RESET_ADC = 0, ///< Select ADC to be reset + RESET_BUSCTRL = 1, ///< Select BUSCTRL to be reset + RESET_DMA = 2, ///< Select DMA to be reset + RESET_I2C0 = 3, ///< Select I2C0 to be reset + RESET_I2C1 = 4, ///< Select I2C1 to be reset + RESET_IO_BANK0 = 5, ///< Select IO_BANK0 to be reset + RESET_IO_QSPI = 6, ///< Select IO_QSPI to be reset + RESET_JTAG = 7, ///< Select JTAG to be reset + RESET_PADS_BANK0 = 8, ///< Select PADS_BANK0 to be reset + RESET_PADS_QSPI = 9, ///< Select PADS_QSPI to be reset + RESET_PIO0 = 10, ///< Select PIO0 to be reset + RESET_PIO1 = 11, ///< Select PIO1 to be reset + RESET_PLL_SYS = 12, ///< Select PLL_SYS to be reset + RESET_PLL_USB = 13, ///< Select PLL_USB to be reset + RESET_PWM = 14, ///< Select PWM to be reset + RESET_RTC = 15, ///< Select RTC to be reset + RESET_SPI0 = 16, ///< Select SPI0 to be reset + RESET_SPI1 = 17, ///< Select SPI1 to be reset + RESET_SYSCFG = 18, ///< Select SYSCFG to be reset + RESET_SYSINFO = 19, ///< Select SYSINFO to be reset + RESET_TBMAN = 20, ///< Select TBMAN to be reset + RESET_TIMER = 21, ///< Select TIMER to be reset + RESET_UART0 = 22, ///< Select UART0 to be reset + RESET_UART1 = 23, ///< Select UART1 to be reset + RESET_USBCTRL = 24, ///< Select USBCTRL to be reset + RESET_COUNT +} reset_num_t; + +/// \tag::resets_hw[] +typedef struct { + _REG_(RESETS_RESET_OFFSET) // RESETS_RESET + // Reset control. + // 0x01000000 [24] USBCTRL (1) + // 0x00800000 [23] UART1 (1) + // 0x00400000 [22] UART0 (1) + // 0x00200000 [21] TIMER (1) + // 0x00100000 [20] TBMAN (1) + // 0x00080000 [19] SYSINFO (1) + // 0x00040000 [18] SYSCFG (1) + // 0x00020000 [17] SPI1 (1) + // 0x00010000 [16] SPI0 (1) + // 0x00008000 [15] RTC (1) + // 0x00004000 [14] PWM (1) + // 0x00002000 [13] PLL_USB (1) + // 0x00001000 [12] PLL_SYS (1) + // 0x00000800 [11] PIO1 (1) + // 0x00000400 [10] PIO0 (1) + // 0x00000200 [9] PADS_QSPI (1) + // 0x00000100 [8] PADS_BANK0 (1) + // 0x00000080 [7] JTAG (1) + // 0x00000040 [6] IO_QSPI (1) + // 0x00000020 [5] IO_BANK0 (1) + // 0x00000010 [4] I2C1 (1) + // 0x00000008 [3] I2C0 (1) + // 0x00000004 [2] DMA (1) + // 0x00000002 [1] BUSCTRL (1) + // 0x00000001 [0] ADC (1) + io_rw_32 reset; + + _REG_(RESETS_WDSEL_OFFSET) // RESETS_WDSEL + // Watchdog select. + // 0x01000000 [24] USBCTRL (0) + // 0x00800000 [23] UART1 (0) + // 0x00400000 [22] UART0 (0) + // 0x00200000 [21] TIMER (0) + // 0x00100000 [20] TBMAN (0) + // 0x00080000 [19] SYSINFO (0) + // 0x00040000 [18] SYSCFG (0) + // 0x00020000 [17] SPI1 (0) + // 0x00010000 [16] SPI0 (0) + // 0x00008000 [15] RTC (0) + // 0x00004000 [14] PWM (0) + // 0x00002000 [13] PLL_USB (0) + // 0x00001000 [12] PLL_SYS (0) + // 0x00000800 [11] PIO1 (0) + // 0x00000400 [10] PIO0 (0) + // 0x00000200 [9] PADS_QSPI (0) + // 0x00000100 [8] PADS_BANK0 (0) + // 0x00000080 [7] JTAG (0) + // 0x00000040 [6] IO_QSPI (0) + // 0x00000020 [5] IO_BANK0 (0) + // 0x00000010 [4] I2C1 (0) + // 0x00000008 [3] I2C0 (0) + // 0x00000004 [2] DMA (0) + // 0x00000002 [1] BUSCTRL (0) + // 0x00000001 [0] ADC (0) + io_rw_32 wdsel; + + _REG_(RESETS_RESET_DONE_OFFSET) // RESETS_RESET_DONE + // Reset done. + // 0x01000000 [24] USBCTRL (0) + // 0x00800000 [23] UART1 (0) + // 0x00400000 [22] UART0 (0) + // 0x00200000 [21] TIMER (0) + // 0x00100000 [20] TBMAN (0) + // 0x00080000 [19] SYSINFO (0) + // 0x00040000 [18] SYSCFG (0) + // 0x00020000 [17] SPI1 (0) + // 0x00010000 [16] SPI0 (0) + // 0x00008000 [15] RTC (0) + // 0x00004000 [14] PWM (0) + // 0x00002000 [13] PLL_USB (0) + // 0x00001000 [12] PLL_SYS (0) + // 0x00000800 [11] PIO1 (0) + // 0x00000400 [10] PIO0 (0) + // 0x00000200 [9] PADS_QSPI (0) + // 0x00000100 [8] PADS_BANK0 (0) + // 0x00000080 [7] JTAG (0) + // 0x00000040 [6] IO_QSPI (0) + // 0x00000020 [5] IO_BANK0 (0) + // 0x00000010 [4] I2C1 (0) + // 0x00000008 [3] I2C0 (0) + // 0x00000004 [2] DMA (0) + // 0x00000002 [1] BUSCTRL (0) + // 0x00000001 [0] ADC (0) + io_ro_32 reset_done; +} resets_hw_t; +/// \end::resets_hw[] + +#define resets_hw ((resets_hw_t *)RESETS_BASE) +static_assert(sizeof (resets_hw_t) == 0x000c, ""); + +#endif // _HARDWARE_STRUCTS_RESETS_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/rosc.h b/lib/pico-sdk/rp2040/hardware/structs/rosc.h new file mode 100644 index 00000000..2bc82007 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/rosc.h @@ -0,0 +1,92 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_ROSC_H +#define _HARDWARE_STRUCTS_ROSC_H + +/** + * \file rp2040/rosc.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/rosc.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_rosc +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/rosc.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(ROSC_CTRL_OFFSET) // ROSC_CTRL + // Ring Oscillator control + // 0x00fff000 [23:12] ENABLE (-) On power-up this field is initialised to ENABLE + + // 0x00000fff [11:0] FREQ_RANGE (0xaa0) Controls the number of delay stages in the ROSC ring + + io_rw_32 ctrl; + + _REG_(ROSC_FREQA_OFFSET) // ROSC_FREQA + // Ring Oscillator frequency control A + // 0xffff0000 [31:16] PASSWD (0x0000) Set to 0x9696 to apply the settings + + // 0x00007000 [14:12] DS3 (0x0) Stage 3 drive strength + // 0x00000700 [10:8] DS2 (0x0) Stage 2 drive strength + // 0x00000070 [6:4] DS1 (0x0) Stage 1 drive strength + // 0x00000007 [2:0] DS0 (0x0) Stage 0 drive strength + io_rw_32 freqa; + + _REG_(ROSC_FREQB_OFFSET) // ROSC_FREQB + // Ring Oscillator frequency control B + // 0xffff0000 [31:16] PASSWD (0x0000) Set to 0x9696 to apply the settings + + // 0x00007000 [14:12] DS7 (0x0) Stage 7 drive strength + // 0x00000700 [10:8] DS6 (0x0) Stage 6 drive strength + // 0x00000070 [6:4] DS5 (0x0) Stage 5 drive strength + // 0x00000007 [2:0] DS4 (0x0) Stage 4 drive strength + io_rw_32 freqb; + + _REG_(ROSC_DORMANT_OFFSET) // ROSC_DORMANT + // Ring Oscillator pause control + // 0xffffffff [31:0] DORMANT (-) This is used to save power by pausing the ROSC + + io_rw_32 dormant; + + _REG_(ROSC_DIV_OFFSET) // ROSC_DIV + // Controls the output divider + // 0x00000fff [11:0] DIV (-) set to 0xaa0 + div where + + io_rw_32 div; + + _REG_(ROSC_PHASE_OFFSET) // ROSC_PHASE + // Controls the phase shifted output + // 0x00000ff0 [11:4] PASSWD (0x00) set to 0xaa + + // 0x00000008 [3] ENABLE (1) enable the phase-shifted output + + // 0x00000004 [2] FLIP (0) invert the phase-shifted output + + // 0x00000003 [1:0] SHIFT (0x0) phase shift the phase-shifted output by SHIFT input clocks + + io_rw_32 phase; + + _REG_(ROSC_STATUS_OFFSET) // ROSC_STATUS + // Ring Oscillator Status + // 0x80000000 [31] STABLE (0) Oscillator is running and stable + // 0x01000000 [24] BADWRITE (0) An invalid value has been written to CTRL_ENABLE or... + // 0x00010000 [16] DIV_RUNNING (-) post-divider is running + + // 0x00001000 [12] ENABLED (-) Oscillator is enabled but not necessarily running and stable + + io_rw_32 status; + + _REG_(ROSC_RANDOMBIT_OFFSET) // ROSC_RANDOMBIT + // Returns a 1 bit random value + // 0x00000001 [0] RANDOMBIT (1) + io_ro_32 randombit; + + _REG_(ROSC_COUNT_OFFSET) // ROSC_COUNT + // A down counter running at the ROSC frequency which counts to zero and stops. + // 0x000000ff [7:0] COUNT (0x00) + io_rw_32 count; +} rosc_hw_t; + +#define rosc_hw ((rosc_hw_t *)ROSC_BASE) +static_assert(sizeof (rosc_hw_t) == 0x0024, ""); + +#endif // _HARDWARE_STRUCTS_ROSC_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/rtc.h b/lib/pico-sdk/rp2040/hardware/structs/rtc.h new file mode 100644 index 00000000..6f35b682 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/rtc.h @@ -0,0 +1,119 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_RTC_H +#define _HARDWARE_STRUCTS_RTC_H + +/** + * \file rp2040/rtc.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/rtc.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_rtc +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/rtc.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(RTC_CLKDIV_M1_OFFSET) // RTC_CLKDIV_M1 + // Divider minus 1 for the 1 second counter + // 0x0000ffff [15:0] CLKDIV_M1 (0x0000) + io_rw_32 clkdiv_m1; + + _REG_(RTC_SETUP_0_OFFSET) // RTC_SETUP_0 + // RTC setup register 0 + // 0x00fff000 [23:12] YEAR (0x000) Year + // 0x00000f00 [11:8] MONTH (0x0) Month (1 + // 0x0000001f [4:0] DAY (0x00) Day of the month (1 + io_rw_32 setup_0; + + _REG_(RTC_SETUP_1_OFFSET) // RTC_SETUP_1 + // RTC setup register 1 + // 0x07000000 [26:24] DOTW (0x0) Day of the week: 1-Monday + // 0x001f0000 [20:16] HOUR (0x00) Hours + // 0x00003f00 [13:8] MIN (0x00) Minutes + // 0x0000003f [5:0] SEC (0x00) Seconds + io_rw_32 setup_1; + + _REG_(RTC_CTRL_OFFSET) // RTC_CTRL + // RTC Control and status + // 0x00000100 [8] FORCE_NOTLEAPYEAR (0) If set, leapyear is forced off + // 0x00000010 [4] LOAD (0) Load RTC + // 0x00000002 [1] RTC_ACTIVE (-) RTC enabled (running) + // 0x00000001 [0] RTC_ENABLE (0) Enable RTC + io_rw_32 ctrl; + + _REG_(RTC_IRQ_SETUP_0_OFFSET) // RTC_IRQ_SETUP_0 + // Interrupt setup register 0 + // 0x20000000 [29] MATCH_ACTIVE (-) + // 0x10000000 [28] MATCH_ENA (0) Global match enable + // 0x04000000 [26] YEAR_ENA (0) Enable year matching + // 0x02000000 [25] MONTH_ENA (0) Enable month matching + // 0x01000000 [24] DAY_ENA (0) Enable day matching + // 0x00fff000 [23:12] YEAR (0x000) Year + // 0x00000f00 [11:8] MONTH (0x0) Month (1 + // 0x0000001f [4:0] DAY (0x00) Day of the month (1 + io_rw_32 irq_setup_0; + + _REG_(RTC_IRQ_SETUP_1_OFFSET) // RTC_IRQ_SETUP_1 + // Interrupt setup register 1 + // 0x80000000 [31] DOTW_ENA (0) Enable day of the week matching + // 0x40000000 [30] HOUR_ENA (0) Enable hour matching + // 0x20000000 [29] MIN_ENA (0) Enable minute matching + // 0x10000000 [28] SEC_ENA (0) Enable second matching + // 0x07000000 [26:24] DOTW (0x0) Day of the week + // 0x001f0000 [20:16] HOUR (0x00) Hours + // 0x00003f00 [13:8] MIN (0x00) Minutes + // 0x0000003f [5:0] SEC (0x00) Seconds + io_rw_32 irq_setup_1; + + _REG_(RTC_RTC_1_OFFSET) // RTC_RTC_1 + // RTC register 1 + // 0x00fff000 [23:12] YEAR (-) Year + // 0x00000f00 [11:8] MONTH (-) Month (1 + // 0x0000001f [4:0] DAY (-) Day of the month (1 + io_ro_32 rtc_1; + + _REG_(RTC_RTC_0_OFFSET) // RTC_RTC_0 + // RTC register 0 + + // 0x07000000 [26:24] DOTW (-) Day of the week + // 0x001f0000 [20:16] HOUR (-) Hours + // 0x00003f00 [13:8] MIN (-) Minutes + // 0x0000003f [5:0] SEC (-) Seconds + io_ro_32 rtc_0; + + _REG_(RTC_INTR_OFFSET) // RTC_INTR + // Raw Interrupts + // 0x00000001 [0] RTC (0) + io_ro_32 intr; + + _REG_(RTC_INTE_OFFSET) // RTC_INTE + // Interrupt Enable + // 0x00000001 [0] RTC (0) + io_rw_32 inte; + + _REG_(RTC_INTF_OFFSET) // RTC_INTF + // Interrupt Force + // 0x00000001 [0] RTC (0) + io_rw_32 intf; + + _REG_(RTC_INTS_OFFSET) // RTC_INTS + // Interrupt status after masking & forcing + // 0x00000001 [0] RTC (0) + io_ro_32 ints; +} rtc_hw_t; + +#define rtc_hw ((rtc_hw_t *)RTC_BASE) +static_assert(sizeof (rtc_hw_t) == 0x0030, ""); + +#endif // _HARDWARE_STRUCTS_RTC_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/scb.h b/lib/pico-sdk/rp2040/hardware/structs/scb.h new file mode 100644 index 00000000..d4af7480 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/scb.h @@ -0,0 +1,74 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SCB_H +#define _HARDWARE_STRUCTS_SCB_H + +/** + * \file rp2040/scb.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(M0PLUS_CPUID_OFFSET) // M0PLUS_CPUID + // CPUID Base Register + // 0xff000000 [31:24] IMPLEMENTER (0x41) Implementor code: 0x41 = ARM + // 0x00f00000 [23:20] VARIANT (0x0) Major revision number n in the rnpm revision status: + + // 0x000f0000 [19:16] ARCHITECTURE (0xc) Constant that defines the architecture of the processor: + + // 0x0000fff0 [15:4] PARTNO (0xc60) Number of processor within family: 0xC60 = Cortex-M0+ + // 0x0000000f [3:0] REVISION (0x1) Minor revision number m in the rnpm revision status: + + io_ro_32 cpuid; + + _REG_(M0PLUS_ICSR_OFFSET) // M0PLUS_ICSR + // Interrupt Control and State Register + // 0x80000000 [31] NMIPENDSET (0) Setting this bit will activate an NMI + // 0x10000000 [28] PENDSVSET (0) PendSV set-pending bit + // 0x08000000 [27] PENDSVCLR (0) PendSV clear-pending bit + // 0x04000000 [26] PENDSTSET (0) SysTick exception set-pending bit + // 0x02000000 [25] PENDSTCLR (0) SysTick exception clear-pending bit + // 0x00800000 [23] ISRPREEMPT (0) The system can only access this bit when the core is halted + // 0x00400000 [22] ISRPENDING (0) External interrupt pending flag + // 0x001ff000 [20:12] VECTPENDING (0x000) Indicates the exception number for the highest priority... + // 0x000001ff [8:0] VECTACTIVE (0x000) Active exception number field + io_rw_32 icsr; + + _REG_(M0PLUS_VTOR_OFFSET) // M0PLUS_VTOR + // Vector Table Offset Register + // 0xffffff00 [31:8] TBLOFF (0x000000) Bits [31:8] of the indicate the vector table offset address + io_rw_32 vtor; + + _REG_(M0PLUS_AIRCR_OFFSET) // M0PLUS_AIRCR + // Application Interrupt and Reset Control Register + // 0xffff0000 [31:16] VECTKEY (0x0000) Register key: + + // 0x00008000 [15] ENDIANESS (0) Data endianness implemented: + + // 0x00000004 [2] SYSRESETREQ (0) Writing 1 to this bit causes the SYSRESETREQ signal to... + // 0x00000002 [1] VECTCLRACTIVE (0) Clears all active state information for fixed and... + io_rw_32 aircr; + + _REG_(M0PLUS_SCR_OFFSET) // M0PLUS_SCR + // System Control Register + // 0x00000010 [4] SEVONPEND (0) Send Event on Pending bit: + + // 0x00000004 [2] SLEEPDEEP (0) Controls whether the processor uses sleep or deep sleep... + // 0x00000002 [1] SLEEPONEXIT (0) Indicates sleep-on-exit when returning from Handler mode... + io_rw_32 scr; +} armv6m_scb_hw_t; + +#define scb_hw ((armv6m_scb_hw_t *)(PPB_BASE + M0PLUS_CPUID_OFFSET)) +static_assert(sizeof (armv6m_scb_hw_t) == 0x0014, ""); + +#endif // _HARDWARE_STRUCTS_SCB_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/sio.h b/lib/pico-sdk/rp2040/hardware/structs/sio.h new file mode 100644 index 00000000..412a7d86 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/sio.h @@ -0,0 +1,200 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SIO_H +#define _HARDWARE_STRUCTS_SIO_H + +/** + * \file rp2040/sio.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/sio.h" +#include "hardware/structs/interp.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_sio +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/sio.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + + +typedef struct { + _REG_(SIO_CPUID_OFFSET) // SIO_CPUID + // Processor core identifier + // 0xffffffff [31:0] CPUID (-) Value is 0 when read from processor core 0, and 1 when... + io_ro_32 cpuid; + + _REG_(SIO_GPIO_IN_OFFSET) // SIO_GPIO_IN + // Input value for GPIO pins + // 0x3fffffff [29:0] GPIO_IN (0x00000000) Input value for GPIO0 + io_ro_32 gpio_in; + + _REG_(SIO_GPIO_HI_IN_OFFSET) // SIO_GPIO_HI_IN + // Input value for QSPI pins + // 0x0000003f [5:0] GPIO_HI_IN (0x00) Input value on QSPI IO in order 0 + io_ro_32 gpio_hi_in; + + uint32_t _pad0; + + _REG_(SIO_GPIO_OUT_OFFSET) // SIO_GPIO_OUT + // GPIO output value + // 0x3fffffff [29:0] GPIO_OUT (0x00000000) Set output level (1/0 -> high/low) for GPIO0 + io_rw_32 gpio_out; + + _REG_(SIO_GPIO_OUT_SET_OFFSET) // SIO_GPIO_OUT_SET + // GPIO output value set + // 0x3fffffff [29:0] GPIO_OUT_SET (0x00000000) Perform an atomic bit-set on GPIO_OUT, i + io_wo_32 gpio_set; + + _REG_(SIO_GPIO_OUT_CLR_OFFSET) // SIO_GPIO_OUT_CLR + // GPIO output value clear + // 0x3fffffff [29:0] GPIO_OUT_CLR (0x00000000) Perform an atomic bit-clear on GPIO_OUT, i + io_wo_32 gpio_clr; + + _REG_(SIO_GPIO_OUT_XOR_OFFSET) // SIO_GPIO_OUT_XOR + // GPIO output value XOR + // 0x3fffffff [29:0] GPIO_OUT_XOR (0x00000000) Perform an atomic bitwise XOR on GPIO_OUT, i + io_wo_32 gpio_togl; + + _REG_(SIO_GPIO_OE_OFFSET) // SIO_GPIO_OE + // GPIO output enable + // 0x3fffffff [29:0] GPIO_OE (0x00000000) Set output enable (1/0 -> output/input) for GPIO0 + io_rw_32 gpio_oe; + + _REG_(SIO_GPIO_OE_SET_OFFSET) // SIO_GPIO_OE_SET + // GPIO output enable set + // 0x3fffffff [29:0] GPIO_OE_SET (0x00000000) Perform an atomic bit-set on GPIO_OE, i + io_wo_32 gpio_oe_set; + + _REG_(SIO_GPIO_OE_CLR_OFFSET) // SIO_GPIO_OE_CLR + // GPIO output enable clear + // 0x3fffffff [29:0] GPIO_OE_CLR (0x00000000) Perform an atomic bit-clear on GPIO_OE, i + io_wo_32 gpio_oe_clr; + + _REG_(SIO_GPIO_OE_XOR_OFFSET) // SIO_GPIO_OE_XOR + // GPIO output enable XOR + // 0x3fffffff [29:0] GPIO_OE_XOR (0x00000000) Perform an atomic bitwise XOR on GPIO_OE, i + io_wo_32 gpio_oe_togl; + + _REG_(SIO_GPIO_HI_OUT_OFFSET) // SIO_GPIO_HI_OUT + // QSPI output value + // 0x0000003f [5:0] GPIO_HI_OUT (0x00) Set output level (1/0 -> high/low) for QSPI IO0 + io_rw_32 gpio_hi_out; + + _REG_(SIO_GPIO_HI_OUT_SET_OFFSET) // SIO_GPIO_HI_OUT_SET + // QSPI output value set + // 0x0000003f [5:0] GPIO_HI_OUT_SET (0x00) Perform an atomic bit-set on GPIO_HI_OUT, i + io_wo_32 gpio_hi_set; + + _REG_(SIO_GPIO_HI_OUT_CLR_OFFSET) // SIO_GPIO_HI_OUT_CLR + // QSPI output value clear + // 0x0000003f [5:0] GPIO_HI_OUT_CLR (0x00) Perform an atomic bit-clear on GPIO_HI_OUT, i + io_wo_32 gpio_hi_clr; + + _REG_(SIO_GPIO_HI_OUT_XOR_OFFSET) // SIO_GPIO_HI_OUT_XOR + // QSPI output value XOR + // 0x0000003f [5:0] GPIO_HI_OUT_XOR (0x00) Perform an atomic bitwise XOR on GPIO_HI_OUT, i + io_wo_32 gpio_hi_togl; + + _REG_(SIO_GPIO_HI_OE_OFFSET) // SIO_GPIO_HI_OE + // QSPI output enable + // 0x0000003f [5:0] GPIO_HI_OE (0x00) Set output enable (1/0 -> output/input) for QSPI IO0 + io_rw_32 gpio_hi_oe; + + _REG_(SIO_GPIO_HI_OE_SET_OFFSET) // SIO_GPIO_HI_OE_SET + // QSPI output enable set + // 0x0000003f [5:0] GPIO_HI_OE_SET (0x00) Perform an atomic bit-set on GPIO_HI_OE, i + io_wo_32 gpio_hi_oe_set; + + _REG_(SIO_GPIO_HI_OE_CLR_OFFSET) // SIO_GPIO_HI_OE_CLR + // QSPI output enable clear + // 0x0000003f [5:0] GPIO_HI_OE_CLR (0x00) Perform an atomic bit-clear on GPIO_HI_OE, i + io_wo_32 gpio_hi_oe_clr; + + _REG_(SIO_GPIO_HI_OE_XOR_OFFSET) // SIO_GPIO_HI_OE_XOR + // QSPI output enable XOR + // 0x0000003f [5:0] GPIO_HI_OE_XOR (0x00) Perform an atomic bitwise XOR on GPIO_HI_OE, i + io_wo_32 gpio_hi_oe_togl; + + _REG_(SIO_FIFO_ST_OFFSET) // SIO_FIFO_ST + // Status register for inter-core FIFOs (mailboxes). + // 0x00000008 [3] ROE (0) Sticky flag indicating the RX FIFO was read when empty + // 0x00000004 [2] WOF (0) Sticky flag indicating the TX FIFO was written when full + // 0x00000002 [1] RDY (1) Value is 1 if this core's TX FIFO is not full (i + // 0x00000001 [0] VLD (0) Value is 1 if this core's RX FIFO is not empty (i + io_rw_32 fifo_st; + + _REG_(SIO_FIFO_WR_OFFSET) // SIO_FIFO_WR + // Write access to this core's TX FIFO + // 0xffffffff [31:0] FIFO_WR (0x00000000) + io_wo_32 fifo_wr; + + _REG_(SIO_FIFO_RD_OFFSET) // SIO_FIFO_RD + // Read access to this core's RX FIFO + // 0xffffffff [31:0] FIFO_RD (-) + io_ro_32 fifo_rd; + + _REG_(SIO_SPINLOCK_ST_OFFSET) // SIO_SPINLOCK_ST + // Spinlock state + // 0xffffffff [31:0] SPINLOCK_ST (0x00000000) + io_ro_32 spinlock_st; + + _REG_(SIO_DIV_UDIVIDEND_OFFSET) // SIO_DIV_UDIVIDEND + // Divider unsigned dividend + // 0xffffffff [31:0] DIV_UDIVIDEND (0x00000000) + io_rw_32 div_udividend; + + _REG_(SIO_DIV_UDIVISOR_OFFSET) // SIO_DIV_UDIVISOR + // Divider unsigned divisor + // 0xffffffff [31:0] DIV_UDIVISOR (0x00000000) + io_rw_32 div_udivisor; + + _REG_(SIO_DIV_SDIVIDEND_OFFSET) // SIO_DIV_SDIVIDEND + // Divider signed dividend + // 0xffffffff [31:0] DIV_SDIVIDEND (0x00000000) + io_rw_32 div_sdividend; + + _REG_(SIO_DIV_SDIVISOR_OFFSET) // SIO_DIV_SDIVISOR + // Divider signed divisor + // 0xffffffff [31:0] DIV_SDIVISOR (0x00000000) + io_rw_32 div_sdivisor; + + _REG_(SIO_DIV_QUOTIENT_OFFSET) // SIO_DIV_QUOTIENT + // Divider result quotient + // 0xffffffff [31:0] DIV_QUOTIENT (0x00000000) + io_rw_32 div_quotient; + + _REG_(SIO_DIV_REMAINDER_OFFSET) // SIO_DIV_REMAINDER + // Divider result remainder + // 0xffffffff [31:0] DIV_REMAINDER (0x00000000) + io_rw_32 div_remainder; + + _REG_(SIO_DIV_CSR_OFFSET) // SIO_DIV_CSR + // Control and status register for divider + // 0x00000002 [1] DIRTY (0) Changes to 1 when any register is written, and back to 0... + // 0x00000001 [0] READY (1) Reads as 0 when a calculation is in progress, 1 otherwise + io_ro_32 div_csr; + + uint32_t _pad1; + + interp_hw_t interp[2]; + + // (Description copied from array index 0 register SIO_SPINLOCK0 applies similarly to other array indexes) + _REG_(SIO_SPINLOCK0_OFFSET) // SIO_SPINLOCK0 + // Spinlock register 0 + // 0xffffffff [31:0] SPINLOCK0 (0x00000000) + io_rw_32 spinlock[32]; +} sio_hw_t; + +#define sio_hw ((sio_hw_t *)SIO_BASE) +static_assert(sizeof (sio_hw_t) == 0x0180, ""); + +#endif // _HARDWARE_STRUCTS_SIO_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/spi.h b/lib/pico-sdk/rp2040/hardware/structs/spi.h new file mode 100644 index 00000000..7d1956e9 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/spi.h @@ -0,0 +1,105 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SPI_H +#define _HARDWARE_STRUCTS_SPI_H + +/** + * \file rp2040/spi.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/spi.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_spi +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/spi.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(SPI_SSPCR0_OFFSET) // SPI_SSPCR0 + // Control register 0, SSPCR0 on page 3-4 + // 0x0000ff00 [15:8] SCR (0x00) Serial clock rate + // 0x00000080 [7] SPH (0) SSPCLKOUT phase, applicable to Motorola SPI frame format only + // 0x00000040 [6] SPO (0) SSPCLKOUT polarity, applicable to Motorola SPI frame format only + // 0x00000030 [5:4] FRF (0x0) Frame format: 00 Motorola SPI frame format + // 0x0000000f [3:0] DSS (0x0) Data Size Select: 0000 Reserved, undefined operation + io_rw_32 cr0; + + _REG_(SPI_SSPCR1_OFFSET) // SPI_SSPCR1 + // Control register 1, SSPCR1 on page 3-5 + // 0x00000008 [3] SOD (0) Slave-mode output disable + // 0x00000004 [2] MS (0) Master or slave mode select + // 0x00000002 [1] SSE (0) Synchronous serial port enable: 0 SSP operation disabled + // 0x00000001 [0] LBM (0) Loop back mode: 0 Normal serial port operation enabled + io_rw_32 cr1; + + _REG_(SPI_SSPDR_OFFSET) // SPI_SSPDR + // Data register, SSPDR on page 3-6 + // 0x0000ffff [15:0] DATA (-) Transmit/Receive FIFO: Read Receive FIFO + io_rw_32 dr; + + _REG_(SPI_SSPSR_OFFSET) // SPI_SSPSR + // Status register, SSPSR on page 3-7 + // 0x00000010 [4] BSY (0) PrimeCell SSP busy flag, RO: 0 SSP is idle + // 0x00000008 [3] RFF (0) Receive FIFO full, RO: 0 Receive FIFO is not full + // 0x00000004 [2] RNE (0) Receive FIFO not empty, RO: 0 Receive FIFO is empty + // 0x00000002 [1] TNF (1) Transmit FIFO not full, RO: 0 Transmit FIFO is full + // 0x00000001 [0] TFE (1) Transmit FIFO empty, RO: 0 Transmit FIFO is not empty + io_ro_32 sr; + + _REG_(SPI_SSPCPSR_OFFSET) // SPI_SSPCPSR + // Clock prescale register, SSPCPSR on page 3-8 + // 0x000000ff [7:0] CPSDVSR (0x00) Clock prescale divisor + io_rw_32 cpsr; + + _REG_(SPI_SSPIMSC_OFFSET) // SPI_SSPIMSC + // Interrupt mask set or clear register, SSPIMSC on page 3-9 + // 0x00000008 [3] TXIM (0) Transmit FIFO interrupt mask: 0 Transmit FIFO half empty... + // 0x00000004 [2] RXIM (0) Receive FIFO interrupt mask: 0 Receive FIFO half full or... + // 0x00000002 [1] RTIM (0) Receive timeout interrupt mask: 0 Receive FIFO not empty... + // 0x00000001 [0] RORIM (0) Receive overrun interrupt mask: 0 Receive FIFO written... + io_rw_32 imsc; + + _REG_(SPI_SSPRIS_OFFSET) // SPI_SSPRIS + // Raw interrupt status register, SSPRIS on page 3-10 + // 0x00000008 [3] TXRIS (1) Gives the raw interrupt state, prior to masking, of the... + // 0x00000004 [2] RXRIS (0) Gives the raw interrupt state, prior to masking, of the... + // 0x00000002 [1] RTRIS (0) Gives the raw interrupt state, prior to masking, of the... + // 0x00000001 [0] RORRIS (0) Gives the raw interrupt state, prior to masking, of the... + io_ro_32 ris; + + _REG_(SPI_SSPMIS_OFFSET) // SPI_SSPMIS + // Masked interrupt status register, SSPMIS on page 3-11 + // 0x00000008 [3] TXMIS (0) Gives the transmit FIFO masked interrupt state, after... + // 0x00000004 [2] RXMIS (0) Gives the receive FIFO masked interrupt state, after... + // 0x00000002 [1] RTMIS (0) Gives the receive timeout masked interrupt state, after... + // 0x00000001 [0] RORMIS (0) Gives the receive over run masked interrupt status,... + io_ro_32 mis; + + _REG_(SPI_SSPICR_OFFSET) // SPI_SSPICR + // Interrupt clear register, SSPICR on page 3-11 + // 0x00000002 [1] RTIC (0) Clears the SSPRTINTR interrupt + // 0x00000001 [0] RORIC (0) Clears the SSPRORINTR interrupt + io_rw_32 icr; + + _REG_(SPI_SSPDMACR_OFFSET) // SPI_SSPDMACR + // DMA control register, SSPDMACR on page 3-12 + // 0x00000002 [1] TXDMAE (0) Transmit DMA Enable + // 0x00000001 [0] RXDMAE (0) Receive DMA Enable + io_rw_32 dmacr; +} spi_hw_t; + +#define spi0_hw ((spi_hw_t *)SPI0_BASE) +#define spi1_hw ((spi_hw_t *)SPI1_BASE) +static_assert(sizeof (spi_hw_t) == 0x0028, ""); + +#endif // _HARDWARE_STRUCTS_SPI_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/ssi.h b/lib/pico-sdk/rp2040/hardware/structs/ssi.h new file mode 100644 index 00000000..9d5fdace --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/ssi.h @@ -0,0 +1,215 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SSI_H +#define _HARDWARE_STRUCTS_SSI_H + +/** + * \file rp2040/ssi.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/ssi.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_ssi +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/ssi.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(SSI_CTRLR0_OFFSET) // SSI_CTRLR0 + // Control register 0 + // 0x01000000 [24] SSTE (0) Slave select toggle enable + // 0x00600000 [22:21] SPI_FRF (0x0) SPI frame format + // 0x001f0000 [20:16] DFS_32 (0x00) Data frame size in 32b transfer mode + + // 0x0000f000 [15:12] CFS (0x0) Control frame size + + // 0x00000800 [11] SRL (0) Shift register loop (test mode) + // 0x00000400 [10] SLV_OE (0) Slave output enable + // 0x00000300 [9:8] TMOD (0x0) Transfer mode + // 0x00000080 [7] SCPOL (0) Serial clock polarity + // 0x00000040 [6] SCPH (0) Serial clock phase + // 0x00000030 [5:4] FRF (0x0) Frame format + // 0x0000000f [3:0] DFS (0x0) Data frame size + io_rw_32 ctrlr0; + + _REG_(SSI_CTRLR1_OFFSET) // SSI_CTRLR1 + // Master Control register 1 + // 0x0000ffff [15:0] NDF (0x0000) Number of data frames + io_rw_32 ctrlr1; + + _REG_(SSI_SSIENR_OFFSET) // SSI_SSIENR + // SSI Enable + // 0x00000001 [0] SSI_EN (0) SSI enable + io_rw_32 ssienr; + + _REG_(SSI_MWCR_OFFSET) // SSI_MWCR + // Microwire Control + // 0x00000004 [2] MHS (0) Microwire handshaking + // 0x00000002 [1] MDD (0) Microwire control + // 0x00000001 [0] MWMOD (0) Microwire transfer mode + io_rw_32 mwcr; + + _REG_(SSI_SER_OFFSET) // SSI_SER + // Slave enable + // 0x00000001 [0] SER (0) For each bit: + + io_rw_32 ser; + + _REG_(SSI_BAUDR_OFFSET) // SSI_BAUDR + // Baud rate + // 0x0000ffff [15:0] SCKDV (0x0000) SSI clock divider + io_rw_32 baudr; + + _REG_(SSI_TXFTLR_OFFSET) // SSI_TXFTLR + // TX FIFO threshold level + // 0x000000ff [7:0] TFT (0x00) Transmit FIFO threshold + io_rw_32 txftlr; + + _REG_(SSI_RXFTLR_OFFSET) // SSI_RXFTLR + // RX FIFO threshold level + // 0x000000ff [7:0] RFT (0x00) Receive FIFO threshold + io_rw_32 rxftlr; + + _REG_(SSI_TXFLR_OFFSET) // SSI_TXFLR + // TX FIFO level + // 0x000000ff [7:0] TFTFL (0x00) Transmit FIFO level + io_ro_32 txflr; + + _REG_(SSI_RXFLR_OFFSET) // SSI_RXFLR + // RX FIFO level + // 0x000000ff [7:0] RXTFL (0x00) Receive FIFO level + io_ro_32 rxflr; + + _REG_(SSI_SR_OFFSET) // SSI_SR + // Status register + // 0x00000040 [6] DCOL (0) Data collision error + // 0x00000020 [5] TXE (0) Transmission error + // 0x00000010 [4] RFF (0) Receive FIFO full + // 0x00000008 [3] RFNE (0) Receive FIFO not empty + // 0x00000004 [2] TFE (0) Transmit FIFO empty + // 0x00000002 [1] TFNF (0) Transmit FIFO not full + // 0x00000001 [0] BUSY (0) SSI busy flag + io_ro_32 sr; + + _REG_(SSI_IMR_OFFSET) // SSI_IMR + // Interrupt mask + // 0x00000020 [5] MSTIM (0) Multi-master contention interrupt mask + // 0x00000010 [4] RXFIM (0) Receive FIFO full interrupt mask + // 0x00000008 [3] RXOIM (0) Receive FIFO overflow interrupt mask + // 0x00000004 [2] RXUIM (0) Receive FIFO underflow interrupt mask + // 0x00000002 [1] TXOIM (0) Transmit FIFO overflow interrupt mask + // 0x00000001 [0] TXEIM (0) Transmit FIFO empty interrupt mask + io_rw_32 imr; + + _REG_(SSI_ISR_OFFSET) // SSI_ISR + // Interrupt status + // 0x00000020 [5] MSTIS (0) Multi-master contention interrupt status + // 0x00000010 [4] RXFIS (0) Receive FIFO full interrupt status + // 0x00000008 [3] RXOIS (0) Receive FIFO overflow interrupt status + // 0x00000004 [2] RXUIS (0) Receive FIFO underflow interrupt status + // 0x00000002 [1] TXOIS (0) Transmit FIFO overflow interrupt status + // 0x00000001 [0] TXEIS (0) Transmit FIFO empty interrupt status + io_ro_32 isr; + + _REG_(SSI_RISR_OFFSET) // SSI_RISR + // Raw interrupt status + // 0x00000020 [5] MSTIR (0) Multi-master contention raw interrupt status + // 0x00000010 [4] RXFIR (0) Receive FIFO full raw interrupt status + // 0x00000008 [3] RXOIR (0) Receive FIFO overflow raw interrupt status + // 0x00000004 [2] RXUIR (0) Receive FIFO underflow raw interrupt status + // 0x00000002 [1] TXOIR (0) Transmit FIFO overflow raw interrupt status + // 0x00000001 [0] TXEIR (0) Transmit FIFO empty raw interrupt status + io_ro_32 risr; + + _REG_(SSI_TXOICR_OFFSET) // SSI_TXOICR + // TX FIFO overflow interrupt clear + // 0x00000001 [0] TXOICR (0) Clear-on-read transmit FIFO overflow interrupt + io_ro_32 txoicr; + + _REG_(SSI_RXOICR_OFFSET) // SSI_RXOICR + // RX FIFO overflow interrupt clear + // 0x00000001 [0] RXOICR (0) Clear-on-read receive FIFO overflow interrupt + io_ro_32 rxoicr; + + _REG_(SSI_RXUICR_OFFSET) // SSI_RXUICR + // RX FIFO underflow interrupt clear + // 0x00000001 [0] RXUICR (0) Clear-on-read receive FIFO underflow interrupt + io_ro_32 rxuicr; + + _REG_(SSI_MSTICR_OFFSET) // SSI_MSTICR + // Multi-master interrupt clear + // 0x00000001 [0] MSTICR (0) Clear-on-read multi-master contention interrupt + io_ro_32 msticr; + + _REG_(SSI_ICR_OFFSET) // SSI_ICR + // Interrupt clear + // 0x00000001 [0] ICR (0) Clear-on-read all active interrupts + io_ro_32 icr; + + _REG_(SSI_DMACR_OFFSET) // SSI_DMACR + // DMA control + // 0x00000002 [1] TDMAE (0) Transmit DMA enable + // 0x00000001 [0] RDMAE (0) Receive DMA enable + io_rw_32 dmacr; + + _REG_(SSI_DMATDLR_OFFSET) // SSI_DMATDLR + // DMA TX data level + // 0x000000ff [7:0] DMATDL (0x00) Transmit data watermark level + io_rw_32 dmatdlr; + + _REG_(SSI_DMARDLR_OFFSET) // SSI_DMARDLR + // DMA RX data level + // 0x000000ff [7:0] DMARDL (0x00) Receive data watermark level (DMARDLR+1) + io_rw_32 dmardlr; + + _REG_(SSI_IDR_OFFSET) // SSI_IDR + // Identification register + // 0xffffffff [31:0] IDCODE (0x51535049) Peripheral dentification code + io_ro_32 idr; + + _REG_(SSI_SSI_VERSION_ID_OFFSET) // SSI_SSI_VERSION_ID + // Version ID + // 0xffffffff [31:0] SSI_COMP_VERSION (0x3430312a) SNPS component version (format X + io_ro_32 ssi_version_id; + + _REG_(SSI_DR0_OFFSET) // SSI_DR0 + // Data Register 0 (of 36) + // 0xffffffff [31:0] DR (0x00000000) First data register of 36 + io_rw_32 dr0; + + uint32_t _pad0[35]; + + _REG_(SSI_RX_SAMPLE_DLY_OFFSET) // SSI_RX_SAMPLE_DLY + // RX sample delay + // 0x000000ff [7:0] RSD (0x00) RXD sample delay (in SCLK cycles) + io_rw_32 rx_sample_dly; + + _REG_(SSI_SPI_CTRLR0_OFFSET) // SSI_SPI_CTRLR0 + // SPI control + // 0xff000000 [31:24] XIP_CMD (0x03) SPI Command to send in XIP mode (INST_L = 8-bit) or to... + // 0x00040000 [18] SPI_RXDS_EN (0) Read data strobe enable + // 0x00020000 [17] INST_DDR_EN (0) Instruction DDR transfer enable + // 0x00010000 [16] SPI_DDR_EN (0) SPI DDR transfer enable + // 0x0000f800 [15:11] WAIT_CYCLES (0x00) Wait cycles between control frame transmit and data... + // 0x00000300 [9:8] INST_L (0x0) Instruction length (0/4/8/16b) + // 0x0000003c [5:2] ADDR_L (0x0) Address length (0b-60b in 4b increments) + // 0x00000003 [1:0] TRANS_TYPE (0x0) Address and instruction transfer format + io_rw_32 spi_ctrlr0; + + _REG_(SSI_TXD_DRIVE_EDGE_OFFSET) // SSI_TXD_DRIVE_EDGE + // TX drive edge + // 0x000000ff [7:0] TDE (0x00) TXD drive edge + io_rw_32 txd_drive_edge; +} ssi_hw_t; + +#define ssi_hw ((ssi_hw_t *)XIP_SSI_BASE) +static_assert(sizeof (ssi_hw_t) == 0x00fc, ""); + +#endif // _HARDWARE_STRUCTS_SSI_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/syscfg.h b/lib/pico-sdk/rp2040/hardware/structs/syscfg.h new file mode 100644 index 00000000..1d63dc75 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/syscfg.h @@ -0,0 +1,84 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SYSCFG_H +#define _HARDWARE_STRUCTS_SYSCFG_H + +/** + * \file rp2040/syscfg.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/syscfg.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_syscfg +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/syscfg.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(SYSCFG_PROC0_NMI_MASK_OFFSET) // SYSCFG_PROC0_NMI_MASK + // Processor core 0 NMI source mask + // 0xffffffff [31:0] PROC0_NMI_MASK (0x00000000) Set a bit high to enable NMI from that IRQ + io_rw_32 proc0_nmi_mask; + + _REG_(SYSCFG_PROC1_NMI_MASK_OFFSET) // SYSCFG_PROC1_NMI_MASK + // Processor core 1 NMI source mask + // 0xffffffff [31:0] PROC1_NMI_MASK (0x00000000) Set a bit high to enable NMI from that IRQ + io_rw_32 proc1_nmi_mask; + + _REG_(SYSCFG_PROC_CONFIG_OFFSET) // SYSCFG_PROC_CONFIG + // Configuration for processors + // 0xf0000000 [31:28] PROC1_DAP_INSTID (0x1) Configure proc1 DAP instance ID + // 0x0f000000 [27:24] PROC0_DAP_INSTID (0x0) Configure proc0 DAP instance ID + // 0x00000002 [1] PROC1_HALTED (0) Indication that proc1 has halted + // 0x00000001 [0] PROC0_HALTED (0) Indication that proc0 has halted + io_rw_32 proc_config; + + _REG_(SYSCFG_PROC_IN_SYNC_BYPASS_OFFSET) // SYSCFG_PROC_IN_SYNC_BYPASS + // For each bit, if 1, bypass the input synchronizer between that GPIO + + // 0x3fffffff [29:0] PROC_IN_SYNC_BYPASS (0x00000000) + io_rw_32 proc_in_sync_bypass; + + _REG_(SYSCFG_PROC_IN_SYNC_BYPASS_HI_OFFSET) // SYSCFG_PROC_IN_SYNC_BYPASS_HI + // For each bit, if 1, bypass the input synchronizer between that GPIO + + // 0x0000003f [5:0] PROC_IN_SYNC_BYPASS_HI (0x00) + io_rw_32 proc_in_sync_bypass_hi; + + _REG_(SYSCFG_DBGFORCE_OFFSET) // SYSCFG_DBGFORCE + // Directly control the SWD debug port of either processor + // 0x00000080 [7] PROC1_ATTACH (0) Attach processor 1 debug port to syscfg controls, and... + // 0x00000040 [6] PROC1_SWCLK (1) Directly drive processor 1 SWCLK, if PROC1_ATTACH is set + // 0x00000020 [5] PROC1_SWDI (1) Directly drive processor 1 SWDIO input, if PROC1_ATTACH is set + // 0x00000010 [4] PROC1_SWDO (-) Observe the value of processor 1 SWDIO output + // 0x00000008 [3] PROC0_ATTACH (0) Attach processor 0 debug port to syscfg controls, and... + // 0x00000004 [2] PROC0_SWCLK (1) Directly drive processor 0 SWCLK, if PROC0_ATTACH is set + // 0x00000002 [1] PROC0_SWDI (1) Directly drive processor 0 SWDIO input, if PROC0_ATTACH is set + // 0x00000001 [0] PROC0_SWDO (-) Observe the value of processor 0 SWDIO output + io_rw_32 dbgforce; + + _REG_(SYSCFG_MEMPOWERDOWN_OFFSET) // SYSCFG_MEMPOWERDOWN + // Control power downs to memories + // 0x00000080 [7] ROM (0) + // 0x00000040 [6] USB (0) + // 0x00000020 [5] SRAM5 (0) + // 0x00000010 [4] SRAM4 (0) + // 0x00000008 [3] SRAM3 (0) + // 0x00000004 [2] SRAM2 (0) + // 0x00000002 [1] SRAM1 (0) + // 0x00000001 [0] SRAM0 (0) + io_rw_32 mempowerdown; +} syscfg_hw_t; + +#define syscfg_hw ((syscfg_hw_t *)SYSCFG_BASE) +static_assert(sizeof (syscfg_hw_t) == 0x001c, ""); + +#endif // _HARDWARE_STRUCTS_SYSCFG_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/sysinfo.h b/lib/pico-sdk/rp2040/hardware/structs/sysinfo.h new file mode 100644 index 00000000..6c0502f6 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/sysinfo.h @@ -0,0 +1,52 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SYSINFO_H +#define _HARDWARE_STRUCTS_SYSINFO_H + +/** + * \file rp2040/sysinfo.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/sysinfo.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_sysinfo +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/sysinfo.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(SYSINFO_CHIP_ID_OFFSET) // SYSINFO_CHIP_ID + // JEDEC JEP-106 compliant chip identifier + // 0xf0000000 [31:28] REVISION (-) + // 0x0ffff000 [27:12] PART (-) + // 0x00000fff [11:0] MANUFACTURER (-) + io_ro_32 chip_id; + + _REG_(SYSINFO_PLATFORM_OFFSET) // SYSINFO_PLATFORM + // Platform register + // 0x00000002 [1] ASIC (0) + // 0x00000001 [0] FPGA (0) + io_ro_32 platform; + + uint32_t _pad0[2]; + + _REG_(SYSINFO_GITREF_RP2040_OFFSET) // SYSINFO_GITREF_RP2040 + // Git hash of the chip source + // 0xffffffff [31:0] GITREF_RP2040 (-) + io_ro_32 gitref_rp2040; +} sysinfo_hw_t; + +#define sysinfo_hw ((sysinfo_hw_t *)SYSINFO_BASE) +static_assert(sizeof (sysinfo_hw_t) == 0x0014, ""); + +#endif // _HARDWARE_STRUCTS_SYSINFO_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/systick.h b/lib/pico-sdk/rp2040/hardware/structs/systick.h new file mode 100644 index 00000000..ee878719 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/systick.h @@ -0,0 +1,57 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_SYSTICK_H +#define _HARDWARE_STRUCTS_SYSTICK_H + +/** + * \file rp2040/systick.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(M0PLUS_SYST_CSR_OFFSET) // M0PLUS_SYST_CSR + // SysTick Control and Status Register + // 0x00010000 [16] COUNTFLAG (0) Returns 1 if timer counted to 0 since last time this was read + // 0x00000004 [2] CLKSOURCE (0) SysTick clock source + // 0x00000002 [1] TICKINT (0) Enables SysTick exception request: + + // 0x00000001 [0] ENABLE (0) Enable SysTick counter: + + io_rw_32 csr; + + _REG_(M0PLUS_SYST_RVR_OFFSET) // M0PLUS_SYST_RVR + // SysTick Reload Value Register + // 0x00ffffff [23:0] RELOAD (0x000000) Value to load into the SysTick Current Value Register... + io_rw_32 rvr; + + _REG_(M0PLUS_SYST_CVR_OFFSET) // M0PLUS_SYST_CVR + // SysTick Current Value Register + // 0x00ffffff [23:0] CURRENT (0x000000) Reads return the current value of the SysTick counter + io_rw_32 cvr; + + _REG_(M0PLUS_SYST_CALIB_OFFSET) // M0PLUS_SYST_CALIB + // SysTick Calibration Value Register + // 0x80000000 [31] NOREF (0) If reads as 1, the Reference clock is not provided - the... + // 0x40000000 [30] SKEW (0) If reads as 1, the calibration value for 10ms is inexact... + // 0x00ffffff [23:0] TENMS (0x000000) An optional Reload value to be used for 10ms (100Hz)... + io_ro_32 calib; +} systick_hw_t; + +#define systick_hw ((systick_hw_t *)(PPB_BASE + M0PLUS_SYST_CSR_OFFSET)) +static_assert(sizeof (systick_hw_t) == 0x0010, ""); + +#endif // _HARDWARE_STRUCTS_SYSTICK_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/tbman.h b/lib/pico-sdk/rp2040/hardware/structs/tbman.h new file mode 100644 index 00000000..78a5f3b2 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/tbman.h @@ -0,0 +1,38 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_TBMAN_H +#define _HARDWARE_STRUCTS_TBMAN_H + +/** + * \file rp2040/tbman.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/tbman.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_tbman +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/tbman.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(TBMAN_PLATFORM_OFFSET) // TBMAN_PLATFORM + // Indicates the type of platform in use + // 0x00000002 [1] FPGA (0) Indicates the platform is an FPGA + // 0x00000001 [0] ASIC (1) Indicates the platform is an ASIC + io_ro_32 platform; +} tbman_hw_t; + +#define tbman_hw ((tbman_hw_t *)TBMAN_BASE) +static_assert(sizeof (tbman_hw_t) == 0x0004, ""); + +#endif // _HARDWARE_STRUCTS_TBMAN_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/timer.h b/lib/pico-sdk/rp2040/hardware/structs/timer.h new file mode 100644 index 00000000..1b059ad5 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/timer.h @@ -0,0 +1,116 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_TIMER_H +#define _HARDWARE_STRUCTS_TIMER_H + +/** + * \file rp2040/timer.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/timer.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_timer +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/timer.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(TIMER_TIMEHW_OFFSET) // TIMER_TIMEHW + // Write to bits 63:32 of time + + // 0xffffffff [31:0] TIMEHW (0x00000000) + io_wo_32 timehw; + + _REG_(TIMER_TIMELW_OFFSET) // TIMER_TIMELW + // Write to bits 31:0 of time + + // 0xffffffff [31:0] TIMELW (0x00000000) + io_wo_32 timelw; + + _REG_(TIMER_TIMEHR_OFFSET) // TIMER_TIMEHR + // Read from bits 63:32 of time + + // 0xffffffff [31:0] TIMEHR (0x00000000) + io_ro_32 timehr; + + _REG_(TIMER_TIMELR_OFFSET) // TIMER_TIMELR + // Read from bits 31:0 of time + // 0xffffffff [31:0] TIMELR (0x00000000) + io_ro_32 timelr; + + // (Description copied from array index 0 register TIMER_ALARM0 applies similarly to other array indexes) + _REG_(TIMER_ALARM0_OFFSET) // TIMER_ALARM0 + // Arm alarm 0, and configure the time it will fire + // 0xffffffff [31:0] ALARM0 (0x00000000) + io_rw_32 alarm[4]; + + _REG_(TIMER_ARMED_OFFSET) // TIMER_ARMED + // Indicates the armed/disarmed status of each alarm + // 0x0000000f [3:0] ARMED (0x0) + io_rw_32 armed; + + _REG_(TIMER_TIMERAWH_OFFSET) // TIMER_TIMERAWH + // Raw read from bits 63:32 of time (no side effects) + // 0xffffffff [31:0] TIMERAWH (0x00000000) + io_ro_32 timerawh; + + _REG_(TIMER_TIMERAWL_OFFSET) // TIMER_TIMERAWL + // Raw read from bits 31:0 of time (no side effects) + // 0xffffffff [31:0] TIMERAWL (0x00000000) + io_ro_32 timerawl; + + _REG_(TIMER_DBGPAUSE_OFFSET) // TIMER_DBGPAUSE + // Set bits high to enable pause when the corresponding debug ports are active + // 0x00000004 [2] DBG1 (1) Pause when processor 1 is in debug mode + // 0x00000002 [1] DBG0 (1) Pause when processor 0 is in debug mode + io_rw_32 dbgpause; + + _REG_(TIMER_PAUSE_OFFSET) // TIMER_PAUSE + // Set high to pause the timer + // 0x00000001 [0] PAUSE (0) + io_rw_32 pause; + + _REG_(TIMER_INTR_OFFSET) // TIMER_INTR + // Raw Interrupts + // 0x00000008 [3] ALARM_3 (0) + // 0x00000004 [2] ALARM_2 (0) + // 0x00000002 [1] ALARM_1 (0) + // 0x00000001 [0] ALARM_0 (0) + io_rw_32 intr; + + _REG_(TIMER_INTE_OFFSET) // TIMER_INTE + // Interrupt Enable + // 0x00000008 [3] ALARM_3 (0) + // 0x00000004 [2] ALARM_2 (0) + // 0x00000002 [1] ALARM_1 (0) + // 0x00000001 [0] ALARM_0 (0) + io_rw_32 inte; + + _REG_(TIMER_INTF_OFFSET) // TIMER_INTF + // Interrupt Force + // 0x00000008 [3] ALARM_3 (0) + // 0x00000004 [2] ALARM_2 (0) + // 0x00000002 [1] ALARM_1 (0) + // 0x00000001 [0] ALARM_0 (0) + io_rw_32 intf; + + _REG_(TIMER_INTS_OFFSET) // TIMER_INTS + // Interrupt status after masking & forcing + // 0x00000008 [3] ALARM_3 (0) + // 0x00000004 [2] ALARM_2 (0) + // 0x00000002 [1] ALARM_1 (0) + // 0x00000001 [0] ALARM_0 (0) + io_ro_32 ints; +} timer_hw_t; + +#define timer_hw ((timer_hw_t *)TIMER_BASE) +static_assert(sizeof (timer_hw_t) == 0x0044, ""); + +#endif // _HARDWARE_STRUCTS_TIMER_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/uart.h b/lib/pico-sdk/rp2040/hardware/structs/uart.h new file mode 100644 index 00000000..db0b4be4 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/uart.h @@ -0,0 +1,182 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_UART_H +#define _HARDWARE_STRUCTS_UART_H + +/** + * \file rp2040/uart.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/uart.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_uart +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/uart.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(UART_UARTDR_OFFSET) // UART_UARTDR + // Data Register, UARTDR + // 0x00000800 [11] OE (-) Overrun error + // 0x00000400 [10] BE (-) Break error + // 0x00000200 [9] PE (-) Parity error + // 0x00000100 [8] FE (-) Framing error + // 0x000000ff [7:0] DATA (-) Receive (read) data character + io_rw_32 dr; + + _REG_(UART_UARTRSR_OFFSET) // UART_UARTRSR + // Receive Status Register/Error Clear Register, UARTRSR/UARTECR + // 0x00000008 [3] OE (0) Overrun error + // 0x00000004 [2] BE (0) Break error + // 0x00000002 [1] PE (0) Parity error + // 0x00000001 [0] FE (0) Framing error + io_rw_32 rsr; + + uint32_t _pad0[4]; + + _REG_(UART_UARTFR_OFFSET) // UART_UARTFR + // Flag Register, UARTFR + // 0x00000100 [8] RI (-) Ring indicator + // 0x00000080 [7] TXFE (1) Transmit FIFO empty + // 0x00000040 [6] RXFF (0) Receive FIFO full + // 0x00000020 [5] TXFF (0) Transmit FIFO full + // 0x00000010 [4] RXFE (1) Receive FIFO empty + // 0x00000008 [3] BUSY (0) UART busy + // 0x00000004 [2] DCD (-) Data carrier detect + // 0x00000002 [1] DSR (-) Data set ready + // 0x00000001 [0] CTS (-) Clear to send + io_ro_32 fr; + + uint32_t _pad1; + + _REG_(UART_UARTILPR_OFFSET) // UART_UARTILPR + // IrDA Low-Power Counter Register, UARTILPR + // 0x000000ff [7:0] ILPDVSR (0x00) 8-bit low-power divisor value + io_rw_32 ilpr; + + _REG_(UART_UARTIBRD_OFFSET) // UART_UARTIBRD + // Integer Baud Rate Register, UARTIBRD + // 0x0000ffff [15:0] BAUD_DIVINT (0x0000) The integer baud rate divisor + io_rw_32 ibrd; + + _REG_(UART_UARTFBRD_OFFSET) // UART_UARTFBRD + // Fractional Baud Rate Register, UARTFBRD + // 0x0000003f [5:0] BAUD_DIVFRAC (0x00) The fractional baud rate divisor + io_rw_32 fbrd; + + _REG_(UART_UARTLCR_H_OFFSET) // UART_UARTLCR_H + // Line Control Register, UARTLCR_H + // 0x00000080 [7] SPS (0) Stick parity select + // 0x00000060 [6:5] WLEN (0x0) Word length + // 0x00000010 [4] FEN (0) Enable FIFOs: 0 = FIFOs are disabled (character mode)... + // 0x00000008 [3] STP2 (0) Two stop bits select + // 0x00000004 [2] EPS (0) Even parity select + // 0x00000002 [1] PEN (0) Parity enable: 0 = parity is disabled and no parity bit... + // 0x00000001 [0] BRK (0) Send break + io_rw_32 lcr_h; + + _REG_(UART_UARTCR_OFFSET) // UART_UARTCR + // Control Register, UARTCR + // 0x00008000 [15] CTSEN (0) CTS hardware flow control enable + // 0x00004000 [14] RTSEN (0) RTS hardware flow control enable + // 0x00002000 [13] OUT2 (0) This bit is the complement of the UART Out2 (nUARTOut2)... + // 0x00001000 [12] OUT1 (0) This bit is the complement of the UART Out1 (nUARTOut1)... + // 0x00000800 [11] RTS (0) Request to send + // 0x00000400 [10] DTR (0) Data transmit ready + // 0x00000200 [9] RXE (1) Receive enable + // 0x00000100 [8] TXE (1) Transmit enable + // 0x00000080 [7] LBE (0) Loopback enable + // 0x00000004 [2] SIRLP (0) SIR low-power IrDA mode + // 0x00000002 [1] SIREN (0) SIR enable: 0 = IrDA SIR ENDEC is disabled + // 0x00000001 [0] UARTEN (0) UART enable: 0 = UART is disabled + io_rw_32 cr; + + _REG_(UART_UARTIFLS_OFFSET) // UART_UARTIFLS + // Interrupt FIFO Level Select Register, UARTIFLS + // 0x00000038 [5:3] RXIFLSEL (0x2) Receive interrupt FIFO level select + // 0x00000007 [2:0] TXIFLSEL (0x2) Transmit interrupt FIFO level select + io_rw_32 ifls; + + _REG_(UART_UARTIMSC_OFFSET) // UART_UARTIMSC + // Interrupt Mask Set/Clear Register, UARTIMSC + // 0x00000400 [10] OEIM (0) Overrun error interrupt mask + // 0x00000200 [9] BEIM (0) Break error interrupt mask + // 0x00000100 [8] PEIM (0) Parity error interrupt mask + // 0x00000080 [7] FEIM (0) Framing error interrupt mask + // 0x00000040 [6] RTIM (0) Receive timeout interrupt mask + // 0x00000020 [5] TXIM (0) Transmit interrupt mask + // 0x00000010 [4] RXIM (0) Receive interrupt mask + // 0x00000008 [3] DSRMIM (0) nUARTDSR modem interrupt mask + // 0x00000004 [2] DCDMIM (0) nUARTDCD modem interrupt mask + // 0x00000002 [1] CTSMIM (0) nUARTCTS modem interrupt mask + // 0x00000001 [0] RIMIM (0) nUARTRI modem interrupt mask + io_rw_32 imsc; + + _REG_(UART_UARTRIS_OFFSET) // UART_UARTRIS + // Raw Interrupt Status Register, UARTRIS + // 0x00000400 [10] OERIS (0) Overrun error interrupt status + // 0x00000200 [9] BERIS (0) Break error interrupt status + // 0x00000100 [8] PERIS (0) Parity error interrupt status + // 0x00000080 [7] FERIS (0) Framing error interrupt status + // 0x00000040 [6] RTRIS (0) Receive timeout interrupt status + // 0x00000020 [5] TXRIS (0) Transmit interrupt status + // 0x00000010 [4] RXRIS (0) Receive interrupt status + // 0x00000008 [3] DSRRMIS (-) nUARTDSR modem interrupt status + // 0x00000004 [2] DCDRMIS (-) nUARTDCD modem interrupt status + // 0x00000002 [1] CTSRMIS (-) nUARTCTS modem interrupt status + // 0x00000001 [0] RIRMIS (-) nUARTRI modem interrupt status + io_ro_32 ris; + + _REG_(UART_UARTMIS_OFFSET) // UART_UARTMIS + // Masked Interrupt Status Register, UARTMIS + // 0x00000400 [10] OEMIS (0) Overrun error masked interrupt status + // 0x00000200 [9] BEMIS (0) Break error masked interrupt status + // 0x00000100 [8] PEMIS (0) Parity error masked interrupt status + // 0x00000080 [7] FEMIS (0) Framing error masked interrupt status + // 0x00000040 [6] RTMIS (0) Receive timeout masked interrupt status + // 0x00000020 [5] TXMIS (0) Transmit masked interrupt status + // 0x00000010 [4] RXMIS (0) Receive masked interrupt status + // 0x00000008 [3] DSRMMIS (-) nUARTDSR modem masked interrupt status + // 0x00000004 [2] DCDMMIS (-) nUARTDCD modem masked interrupt status + // 0x00000002 [1] CTSMMIS (-) nUARTCTS modem masked interrupt status + // 0x00000001 [0] RIMMIS (-) nUARTRI modem masked interrupt status + io_ro_32 mis; + + _REG_(UART_UARTICR_OFFSET) // UART_UARTICR + // Interrupt Clear Register, UARTICR + // 0x00000400 [10] OEIC (-) Overrun error interrupt clear + // 0x00000200 [9] BEIC (-) Break error interrupt clear + // 0x00000100 [8] PEIC (-) Parity error interrupt clear + // 0x00000080 [7] FEIC (-) Framing error interrupt clear + // 0x00000040 [6] RTIC (-) Receive timeout interrupt clear + // 0x00000020 [5] TXIC (-) Transmit interrupt clear + // 0x00000010 [4] RXIC (-) Receive interrupt clear + // 0x00000008 [3] DSRMIC (-) nUARTDSR modem interrupt clear + // 0x00000004 [2] DCDMIC (-) nUARTDCD modem interrupt clear + // 0x00000002 [1] CTSMIC (-) nUARTCTS modem interrupt clear + // 0x00000001 [0] RIMIC (-) nUARTRI modem interrupt clear + io_rw_32 icr; + + _REG_(UART_UARTDMACR_OFFSET) // UART_UARTDMACR + // DMA Control Register, UARTDMACR + // 0x00000004 [2] DMAONERR (0) DMA on error + // 0x00000002 [1] TXDMAE (0) Transmit DMA enable + // 0x00000001 [0] RXDMAE (0) Receive DMA enable + io_rw_32 dmacr; +} uart_hw_t; + +#define uart0_hw ((uart_hw_t *)UART0_BASE) +#define uart1_hw ((uart_hw_t *)UART1_BASE) +static_assert(sizeof (uart_hw_t) == 0x004c, ""); + +#endif // _HARDWARE_STRUCTS_UART_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/usb.h b/lib/pico-sdk/rp2040/hardware/structs/usb.h new file mode 100644 index 00000000..399845f1 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/usb.h @@ -0,0 +1,476 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_USB_H +#define _HARDWARE_STRUCTS_USB_H + +/** + * \file rp2040/usb.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/usb.h" +#include "hardware/structs/usb_dpram.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_usb +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/usb.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(USB_ADDR_ENDP_OFFSET) // USB_ADDR_ENDP + // Device address and endpoint control + // 0x000f0000 [19:16] ENDPOINT (0x0) Device endpoint to send data to + // 0x0000007f [6:0] ADDRESS (0x00) In device mode, the address that the device should respond to + io_rw_32 dev_addr_ctrl; + + // (Description copied from array index 0 register USB_ADDR_ENDP1 applies similarly to other array indexes) + _REG_(USB_ADDR_ENDP1_OFFSET) // USB_ADDR_ENDP1 + // Interrupt endpoint 1 + // 0x04000000 [26] INTEP_PREAMBLE (0) Interrupt EP requires preamble (is a low speed device on... + // 0x02000000 [25] INTEP_DIR (0) Direction of the interrupt endpoint + // 0x000f0000 [19:16] ENDPOINT (0x0) Endpoint number of the interrupt endpoint + // 0x0000007f [6:0] ADDRESS (0x00) Device address + io_rw_32 int_ep_addr_ctrl[15]; + + _REG_(USB_MAIN_CTRL_OFFSET) // USB_MAIN_CTRL + // Main control register + // 0x80000000 [31] SIM_TIMING (0) Reduced timings for simulation + // 0x00000002 [1] HOST_NDEVICE (0) Device mode = 0, Host mode = 1 + // 0x00000001 [0] CONTROLLER_EN (0) Enable controller + io_rw_32 main_ctrl; + + _REG_(USB_SOF_WR_OFFSET) // USB_SOF_WR + // Set the SOF (Start of Frame) frame number in the host controller + // 0x000007ff [10:0] COUNT (0x000) + io_wo_32 sof_wr; + + _REG_(USB_SOF_RD_OFFSET) // USB_SOF_RD + // Read the last SOF (Start of Frame) frame number seen + // 0x000007ff [10:0] COUNT (0x000) + io_ro_32 sof_rd; + + _REG_(USB_SIE_CTRL_OFFSET) // USB_SIE_CTRL + // SIE control register + // 0x80000000 [31] EP0_INT_STALL (0) Device: Set bit in EP_STATUS_STALL_NAK when EP0 sends a STALL + // 0x40000000 [30] EP0_DOUBLE_BUF (0) Device: EP0 single buffered = 0, double buffered = 1 + // 0x20000000 [29] EP0_INT_1BUF (0) Device: Set bit in BUFF_STATUS for every buffer completed on EP0 + // 0x10000000 [28] EP0_INT_2BUF (0) Device: Set bit in BUFF_STATUS for every 2 buffers... + // 0x08000000 [27] EP0_INT_NAK (0) Device: Set bit in EP_STATUS_STALL_NAK when EP0 sends a NAK + // 0x04000000 [26] DIRECT_EN (0) Direct bus drive enable + // 0x02000000 [25] DIRECT_DP (0) Direct control of DP + // 0x01000000 [24] DIRECT_DM (0) Direct control of DM + // 0x00040000 [18] TRANSCEIVER_PD (0) Power down bus transceiver + // 0x00020000 [17] RPU_OPT (0) Device: Pull-up strength (0=1K2, 1=2k3) + // 0x00010000 [16] PULLUP_EN (0) Device: Enable pull up resistor + // 0x00008000 [15] PULLDOWN_EN (0) Host: Enable pull down resistors + // 0x00002000 [13] RESET_BUS (0) Host: Reset bus + // 0x00001000 [12] RESUME (0) Device: Remote wakeup + // 0x00000800 [11] VBUS_EN (0) Host: Enable VBUS + // 0x00000400 [10] KEEP_ALIVE_EN (0) Host: Enable keep alive packet (for low speed bus) + // 0x00000200 [9] SOF_EN (0) Host: Enable SOF generation (for full speed bus) + // 0x00000100 [8] SOF_SYNC (0) Host: Delay packet(s) until after SOF + // 0x00000040 [6] PREAMBLE_EN (0) Host: Preable enable for LS device on FS hub + // 0x00000010 [4] STOP_TRANS (0) Host: Stop transaction + // 0x00000008 [3] RECEIVE_DATA (0) Host: Receive transaction (IN to host) + // 0x00000004 [2] SEND_DATA (0) Host: Send transaction (OUT from host) + // 0x00000002 [1] SEND_SETUP (0) Host: Send Setup packet + // 0x00000001 [0] START_TRANS (0) Host: Start transaction + io_rw_32 sie_ctrl; + + _REG_(USB_SIE_STATUS_OFFSET) // USB_SIE_STATUS + // SIE status register + // 0x80000000 [31] DATA_SEQ_ERROR (0) Data Sequence Error + // 0x40000000 [30] ACK_REC (0) ACK received + // 0x20000000 [29] STALL_REC (0) Host: STALL received + // 0x10000000 [28] NAK_REC (0) Host: NAK received + // 0x08000000 [27] RX_TIMEOUT (0) RX timeout is raised by both the host and device if an... + // 0x04000000 [26] RX_OVERFLOW (0) RX overflow is raised by the Serial RX engine if the... + // 0x02000000 [25] BIT_STUFF_ERROR (0) Bit Stuff Error + // 0x01000000 [24] CRC_ERROR (0) CRC Error + // 0x00080000 [19] BUS_RESET (0) Device: bus reset received + // 0x00040000 [18] TRANS_COMPLETE (0) Transaction complete + // 0x00020000 [17] SETUP_REC (0) Device: Setup packet received + // 0x00010000 [16] CONNECTED (0) Device: connected + // 0x00000800 [11] RESUME (0) Host: Device has initiated a remote resume + // 0x00000400 [10] VBUS_OVER_CURR (0) VBUS over current detected + // 0x00000300 [9:8] SPEED (0x0) Host: device speed + // 0x00000010 [4] SUSPENDED (0) Bus in suspended state + // 0x0000000c [3:2] LINE_STATE (0x0) USB bus line state + // 0x00000001 [0] VBUS_DETECTED (0) Device: VBUS Detected + io_rw_32 sie_status; + + _REG_(USB_INT_EP_CTRL_OFFSET) // USB_INT_EP_CTRL + // interrupt endpoint control register + // 0x0000fffe [15:1] INT_EP_ACTIVE (0x0000) Host: Enable interrupt endpoint 1 => 15 + io_rw_32 int_ep_ctrl; + + _REG_(USB_BUFF_STATUS_OFFSET) // USB_BUFF_STATUS + // Buffer status register + // 0x80000000 [31] EP15_OUT (0) + // 0x40000000 [30] EP15_IN (0) + // 0x20000000 [29] EP14_OUT (0) + // 0x10000000 [28] EP14_IN (0) + // 0x08000000 [27] EP13_OUT (0) + // 0x04000000 [26] EP13_IN (0) + // 0x02000000 [25] EP12_OUT (0) + // 0x01000000 [24] EP12_IN (0) + // 0x00800000 [23] EP11_OUT (0) + // 0x00400000 [22] EP11_IN (0) + // 0x00200000 [21] EP10_OUT (0) + // 0x00100000 [20] EP10_IN (0) + // 0x00080000 [19] EP9_OUT (0) + // 0x00040000 [18] EP9_IN (0) + // 0x00020000 [17] EP8_OUT (0) + // 0x00010000 [16] EP8_IN (0) + // 0x00008000 [15] EP7_OUT (0) + // 0x00004000 [14] EP7_IN (0) + // 0x00002000 [13] EP6_OUT (0) + // 0x00001000 [12] EP6_IN (0) + // 0x00000800 [11] EP5_OUT (0) + // 0x00000400 [10] EP5_IN (0) + // 0x00000200 [9] EP4_OUT (0) + // 0x00000100 [8] EP4_IN (0) + // 0x00000080 [7] EP3_OUT (0) + // 0x00000040 [6] EP3_IN (0) + // 0x00000020 [5] EP2_OUT (0) + // 0x00000010 [4] EP2_IN (0) + // 0x00000008 [3] EP1_OUT (0) + // 0x00000004 [2] EP1_IN (0) + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_rw_32 buf_status; + + _REG_(USB_BUFF_CPU_SHOULD_HANDLE_OFFSET) // USB_BUFF_CPU_SHOULD_HANDLE + // Which of the double buffers should be handled + // 0x80000000 [31] EP15_OUT (0) + // 0x40000000 [30] EP15_IN (0) + // 0x20000000 [29] EP14_OUT (0) + // 0x10000000 [28] EP14_IN (0) + // 0x08000000 [27] EP13_OUT (0) + // 0x04000000 [26] EP13_IN (0) + // 0x02000000 [25] EP12_OUT (0) + // 0x01000000 [24] EP12_IN (0) + // 0x00800000 [23] EP11_OUT (0) + // 0x00400000 [22] EP11_IN (0) + // 0x00200000 [21] EP10_OUT (0) + // 0x00100000 [20] EP10_IN (0) + // 0x00080000 [19] EP9_OUT (0) + // 0x00040000 [18] EP9_IN (0) + // 0x00020000 [17] EP8_OUT (0) + // 0x00010000 [16] EP8_IN (0) + // 0x00008000 [15] EP7_OUT (0) + // 0x00004000 [14] EP7_IN (0) + // 0x00002000 [13] EP6_OUT (0) + // 0x00001000 [12] EP6_IN (0) + // 0x00000800 [11] EP5_OUT (0) + // 0x00000400 [10] EP5_IN (0) + // 0x00000200 [9] EP4_OUT (0) + // 0x00000100 [8] EP4_IN (0) + // 0x00000080 [7] EP3_OUT (0) + // 0x00000040 [6] EP3_IN (0) + // 0x00000020 [5] EP2_OUT (0) + // 0x00000010 [4] EP2_IN (0) + // 0x00000008 [3] EP1_OUT (0) + // 0x00000004 [2] EP1_IN (0) + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_ro_32 buf_cpu_should_handle; + + _REG_(USB_EP_ABORT_OFFSET) // USB_EP_ABORT + // Device only: Can be set to ignore the buffer control register for this endpoint in case you... + // 0x80000000 [31] EP15_OUT (0) + // 0x40000000 [30] EP15_IN (0) + // 0x20000000 [29] EP14_OUT (0) + // 0x10000000 [28] EP14_IN (0) + // 0x08000000 [27] EP13_OUT (0) + // 0x04000000 [26] EP13_IN (0) + // 0x02000000 [25] EP12_OUT (0) + // 0x01000000 [24] EP12_IN (0) + // 0x00800000 [23] EP11_OUT (0) + // 0x00400000 [22] EP11_IN (0) + // 0x00200000 [21] EP10_OUT (0) + // 0x00100000 [20] EP10_IN (0) + // 0x00080000 [19] EP9_OUT (0) + // 0x00040000 [18] EP9_IN (0) + // 0x00020000 [17] EP8_OUT (0) + // 0x00010000 [16] EP8_IN (0) + // 0x00008000 [15] EP7_OUT (0) + // 0x00004000 [14] EP7_IN (0) + // 0x00002000 [13] EP6_OUT (0) + // 0x00001000 [12] EP6_IN (0) + // 0x00000800 [11] EP5_OUT (0) + // 0x00000400 [10] EP5_IN (0) + // 0x00000200 [9] EP4_OUT (0) + // 0x00000100 [8] EP4_IN (0) + // 0x00000080 [7] EP3_OUT (0) + // 0x00000040 [6] EP3_IN (0) + // 0x00000020 [5] EP2_OUT (0) + // 0x00000010 [4] EP2_IN (0) + // 0x00000008 [3] EP1_OUT (0) + // 0x00000004 [2] EP1_IN (0) + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_rw_32 abort; + + _REG_(USB_EP_ABORT_DONE_OFFSET) // USB_EP_ABORT_DONE + // Device only: Used in conjunction with `EP_ABORT` + // 0x80000000 [31] EP15_OUT (0) + // 0x40000000 [30] EP15_IN (0) + // 0x20000000 [29] EP14_OUT (0) + // 0x10000000 [28] EP14_IN (0) + // 0x08000000 [27] EP13_OUT (0) + // 0x04000000 [26] EP13_IN (0) + // 0x02000000 [25] EP12_OUT (0) + // 0x01000000 [24] EP12_IN (0) + // 0x00800000 [23] EP11_OUT (0) + // 0x00400000 [22] EP11_IN (0) + // 0x00200000 [21] EP10_OUT (0) + // 0x00100000 [20] EP10_IN (0) + // 0x00080000 [19] EP9_OUT (0) + // 0x00040000 [18] EP9_IN (0) + // 0x00020000 [17] EP8_OUT (0) + // 0x00010000 [16] EP8_IN (0) + // 0x00008000 [15] EP7_OUT (0) + // 0x00004000 [14] EP7_IN (0) + // 0x00002000 [13] EP6_OUT (0) + // 0x00001000 [12] EP6_IN (0) + // 0x00000800 [11] EP5_OUT (0) + // 0x00000400 [10] EP5_IN (0) + // 0x00000200 [9] EP4_OUT (0) + // 0x00000100 [8] EP4_IN (0) + // 0x00000080 [7] EP3_OUT (0) + // 0x00000040 [6] EP3_IN (0) + // 0x00000020 [5] EP2_OUT (0) + // 0x00000010 [4] EP2_IN (0) + // 0x00000008 [3] EP1_OUT (0) + // 0x00000004 [2] EP1_IN (0) + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_rw_32 abort_done; + + _REG_(USB_EP_STALL_ARM_OFFSET) // USB_EP_STALL_ARM + // Device: this bit must be set in conjunction with the `STALL` bit in the buffer control register... + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_rw_32 ep_stall_arm; + + _REG_(USB_NAK_POLL_OFFSET) // USB_NAK_POLL + // Used by the host controller + // 0x03ff0000 [25:16] DELAY_FS (0x010) NAK polling interval for a full speed device + // 0x000003ff [9:0] DELAY_LS (0x010) NAK polling interval for a low speed device + io_rw_32 nak_poll; + + _REG_(USB_EP_STATUS_STALL_NAK_OFFSET) // USB_EP_STATUS_STALL_NAK + // Device: bits are set when the `IRQ_ON_NAK` or `IRQ_ON_STALL` bits are set + // 0x80000000 [31] EP15_OUT (0) + // 0x40000000 [30] EP15_IN (0) + // 0x20000000 [29] EP14_OUT (0) + // 0x10000000 [28] EP14_IN (0) + // 0x08000000 [27] EP13_OUT (0) + // 0x04000000 [26] EP13_IN (0) + // 0x02000000 [25] EP12_OUT (0) + // 0x01000000 [24] EP12_IN (0) + // 0x00800000 [23] EP11_OUT (0) + // 0x00400000 [22] EP11_IN (0) + // 0x00200000 [21] EP10_OUT (0) + // 0x00100000 [20] EP10_IN (0) + // 0x00080000 [19] EP9_OUT (0) + // 0x00040000 [18] EP9_IN (0) + // 0x00020000 [17] EP8_OUT (0) + // 0x00010000 [16] EP8_IN (0) + // 0x00008000 [15] EP7_OUT (0) + // 0x00004000 [14] EP7_IN (0) + // 0x00002000 [13] EP6_OUT (0) + // 0x00001000 [12] EP6_IN (0) + // 0x00000800 [11] EP5_OUT (0) + // 0x00000400 [10] EP5_IN (0) + // 0x00000200 [9] EP4_OUT (0) + // 0x00000100 [8] EP4_IN (0) + // 0x00000080 [7] EP3_OUT (0) + // 0x00000040 [6] EP3_IN (0) + // 0x00000020 [5] EP2_OUT (0) + // 0x00000010 [4] EP2_IN (0) + // 0x00000008 [3] EP1_OUT (0) + // 0x00000004 [2] EP1_IN (0) + // 0x00000002 [1] EP0_OUT (0) + // 0x00000001 [0] EP0_IN (0) + io_rw_32 ep_nak_stall_status; + + _REG_(USB_USB_MUXING_OFFSET) // USB_USB_MUXING + // Where to connect the USB controller + // 0x00000008 [3] SOFTCON (0) + // 0x00000004 [2] TO_DIGITAL_PAD (0) + // 0x00000002 [1] TO_EXTPHY (0) + // 0x00000001 [0] TO_PHY (0) + io_rw_32 muxing; + + _REG_(USB_USB_PWR_OFFSET) // USB_USB_PWR + // Overrides for the power signals in the event that the VBUS signals are not hooked up to GPIO + // 0x00000020 [5] OVERCURR_DETECT_EN (0) + // 0x00000010 [4] OVERCURR_DETECT (0) + // 0x00000008 [3] VBUS_DETECT_OVERRIDE_EN (0) + // 0x00000004 [2] VBUS_DETECT (0) + // 0x00000002 [1] VBUS_EN_OVERRIDE_EN (0) + // 0x00000001 [0] VBUS_EN (0) + io_rw_32 pwr; + + _REG_(USB_USBPHY_DIRECT_OFFSET) // USB_USBPHY_DIRECT + // Note that most functions are driven directly from usb_fsls controller + // 0x00400000 [22] DM_OVV (0) Status bit from USB PHY + // 0x00200000 [21] DP_OVV (0) Status bit from USB PHY + // 0x00100000 [20] DM_OVCN (0) Status bit from USB PHY + // 0x00080000 [19] DP_OVCN (0) Status bit from USB PHY + // 0x00040000 [18] RX_DM (0) Status bit from USB PHY + + // 0x00020000 [17] RX_DP (0) Status bit from USB PHY + + // 0x00010000 [16] RX_DD (0) Status bit from USB PHY + + // 0x00008000 [15] TX_DIFFMODE (0) + // 0x00004000 [14] TX_FSSLEW (0) + // 0x00002000 [13] TX_PD (0) + // 0x00001000 [12] RX_PD (0) + // 0x00000800 [11] TX_DM (0) Value to drive to USB PHY when override enable is set... + // 0x00000400 [10] TX_DP (0) Value to drive to USB PHY when override enable is set... + // 0x00000200 [9] TX_DM_OE (0) Value to drive to USB PHY when override enable is set... + // 0x00000100 [8] TX_DP_OE (0) Value to drive to USB PHY when override enable is set... + // 0x00000040 [6] DM_PULLDN_EN (0) Value to drive to USB PHY when override enable is set... + // 0x00000020 [5] DM_PULLUP_EN (0) Value to drive to USB PHY when override enable is set... + // 0x00000010 [4] DM_PULLUP_HISEL (0) when dm_pullup_en is set high, this enables second resistor + // 0x00000004 [2] DP_PULLDN_EN (0) Value to drive to USB PHY when override enable is set... + // 0x00000002 [1] DP_PULLUP_EN (0) Value to drive to USB PHY when override enable is set... + // 0x00000001 [0] DP_PULLUP_HISEL (0) when dp_pullup_en is set high, this enables second resistor + io_rw_32 phy_direct; + + _REG_(USB_USBPHY_DIRECT_OVERRIDE_OFFSET) // USB_USBPHY_DIRECT_OVERRIDE + // 0x00008000 [15] TX_DIFFMODE_OVERRIDE_EN (0) + // 0x00001000 [12] DM_PULLUP_OVERRIDE_EN (0) + // 0x00000800 [11] TX_FSSLEW_OVERRIDE_EN (0) + // 0x00000400 [10] TX_PD_OVERRIDE_EN (0) + // 0x00000200 [9] RX_PD_OVERRIDE_EN (0) + // 0x00000100 [8] TX_DM_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000080 [7] TX_DP_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000040 [6] TX_DM_OE_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000020 [5] TX_DP_OE_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000010 [4] DM_PULLDN_EN_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000008 [3] DP_PULLDN_EN_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000004 [2] DP_PULLUP_EN_OVERRIDE_EN (0) Override default value or value driven from USB Controller to PHY + // 0x00000002 [1] DM_PULLUP_HISEL_OVERRIDE_EN (0) + // 0x00000001 [0] DP_PULLUP_HISEL_OVERRIDE_EN (0) + io_rw_32 phy_direct_override; + + _REG_(USB_USBPHY_TRIM_OFFSET) // USB_USBPHY_TRIM + // Note that most functions are driven directly from usb_fsls controller + // 0x00001f00 [12:8] DM_PULLDN_TRIM (0x1f) Value to drive to USB PHY + + // 0x0000001f [4:0] DP_PULLDN_TRIM (0x1f) Value to drive to USB PHY + + io_rw_32 phy_trim; + + uint32_t _pad0; + + _REG_(USB_INTR_OFFSET) // USB_INTR + // Raw Interrupts + // 0x00080000 [19] EP_STALL_NAK (0) Raised when any bit in EP_STATUS_STALL_NAK is set + // 0x00040000 [18] ABORT_DONE (0) Raised when any bit in ABORT_DONE is set + // 0x00020000 [17] DEV_SOF (0) Set every time the device receives a SOF (Start of Frame) packet + // 0x00010000 [16] SETUP_REQ (0) Device + // 0x00008000 [15] DEV_RESUME_FROM_HOST (0) Set when the device receives a resume from the host + // 0x00004000 [14] DEV_SUSPEND (0) Set when the device suspend state changes + // 0x00002000 [13] DEV_CONN_DIS (0) Set when the device connection state changes + // 0x00001000 [12] BUS_RESET (0) Source: SIE_STATUS + // 0x00000800 [11] VBUS_DETECT (0) Source: SIE_STATUS + // 0x00000400 [10] STALL (0) Source: SIE_STATUS + // 0x00000200 [9] ERROR_CRC (0) Source: SIE_STATUS + // 0x00000100 [8] ERROR_BIT_STUFF (0) Source: SIE_STATUS + // 0x00000080 [7] ERROR_RX_OVERFLOW (0) Source: SIE_STATUS + // 0x00000040 [6] ERROR_RX_TIMEOUT (0) Source: SIE_STATUS + // 0x00000020 [5] ERROR_DATA_SEQ (0) Source: SIE_STATUS + // 0x00000010 [4] BUFF_STATUS (0) Raised when any bit in BUFF_STATUS is set + // 0x00000008 [3] TRANS_COMPLETE (0) Raised every time SIE_STATUS + // 0x00000004 [2] HOST_SOF (0) Host: raised every time the host sends a SOF (Start of Frame) + // 0x00000002 [1] HOST_RESUME (0) Host: raised when a device wakes up the host + // 0x00000001 [0] HOST_CONN_DIS (0) Host: raised when a device is connected or disconnected (i + io_ro_32 intr; + + _REG_(USB_INTE_OFFSET) // USB_INTE + // Interrupt Enable + // 0x00080000 [19] EP_STALL_NAK (0) Raised when any bit in EP_STATUS_STALL_NAK is set + // 0x00040000 [18] ABORT_DONE (0) Raised when any bit in ABORT_DONE is set + // 0x00020000 [17] DEV_SOF (0) Set every time the device receives a SOF (Start of Frame) packet + // 0x00010000 [16] SETUP_REQ (0) Device + // 0x00008000 [15] DEV_RESUME_FROM_HOST (0) Set when the device receives a resume from the host + // 0x00004000 [14] DEV_SUSPEND (0) Set when the device suspend state changes + // 0x00002000 [13] DEV_CONN_DIS (0) Set when the device connection state changes + // 0x00001000 [12] BUS_RESET (0) Source: SIE_STATUS + // 0x00000800 [11] VBUS_DETECT (0) Source: SIE_STATUS + // 0x00000400 [10] STALL (0) Source: SIE_STATUS + // 0x00000200 [9] ERROR_CRC (0) Source: SIE_STATUS + // 0x00000100 [8] ERROR_BIT_STUFF (0) Source: SIE_STATUS + // 0x00000080 [7] ERROR_RX_OVERFLOW (0) Source: SIE_STATUS + // 0x00000040 [6] ERROR_RX_TIMEOUT (0) Source: SIE_STATUS + // 0x00000020 [5] ERROR_DATA_SEQ (0) Source: SIE_STATUS + // 0x00000010 [4] BUFF_STATUS (0) Raised when any bit in BUFF_STATUS is set + // 0x00000008 [3] TRANS_COMPLETE (0) Raised every time SIE_STATUS + // 0x00000004 [2] HOST_SOF (0) Host: raised every time the host sends a SOF (Start of Frame) + // 0x00000002 [1] HOST_RESUME (0) Host: raised when a device wakes up the host + // 0x00000001 [0] HOST_CONN_DIS (0) Host: raised when a device is connected or disconnected (i + io_rw_32 inte; + + _REG_(USB_INTF_OFFSET) // USB_INTF + // Interrupt Force + // 0x00080000 [19] EP_STALL_NAK (0) Raised when any bit in EP_STATUS_STALL_NAK is set + // 0x00040000 [18] ABORT_DONE (0) Raised when any bit in ABORT_DONE is set + // 0x00020000 [17] DEV_SOF (0) Set every time the device receives a SOF (Start of Frame) packet + // 0x00010000 [16] SETUP_REQ (0) Device + // 0x00008000 [15] DEV_RESUME_FROM_HOST (0) Set when the device receives a resume from the host + // 0x00004000 [14] DEV_SUSPEND (0) Set when the device suspend state changes + // 0x00002000 [13] DEV_CONN_DIS (0) Set when the device connection state changes + // 0x00001000 [12] BUS_RESET (0) Source: SIE_STATUS + // 0x00000800 [11] VBUS_DETECT (0) Source: SIE_STATUS + // 0x00000400 [10] STALL (0) Source: SIE_STATUS + // 0x00000200 [9] ERROR_CRC (0) Source: SIE_STATUS + // 0x00000100 [8] ERROR_BIT_STUFF (0) Source: SIE_STATUS + // 0x00000080 [7] ERROR_RX_OVERFLOW (0) Source: SIE_STATUS + // 0x00000040 [6] ERROR_RX_TIMEOUT (0) Source: SIE_STATUS + // 0x00000020 [5] ERROR_DATA_SEQ (0) Source: SIE_STATUS + // 0x00000010 [4] BUFF_STATUS (0) Raised when any bit in BUFF_STATUS is set + // 0x00000008 [3] TRANS_COMPLETE (0) Raised every time SIE_STATUS + // 0x00000004 [2] HOST_SOF (0) Host: raised every time the host sends a SOF (Start of Frame) + // 0x00000002 [1] HOST_RESUME (0) Host: raised when a device wakes up the host + // 0x00000001 [0] HOST_CONN_DIS (0) Host: raised when a device is connected or disconnected (i + io_rw_32 intf; + + _REG_(USB_INTS_OFFSET) // USB_INTS + // Interrupt status after masking & forcing + // 0x00080000 [19] EP_STALL_NAK (0) Raised when any bit in EP_STATUS_STALL_NAK is set + // 0x00040000 [18] ABORT_DONE (0) Raised when any bit in ABORT_DONE is set + // 0x00020000 [17] DEV_SOF (0) Set every time the device receives a SOF (Start of Frame) packet + // 0x00010000 [16] SETUP_REQ (0) Device + // 0x00008000 [15] DEV_RESUME_FROM_HOST (0) Set when the device receives a resume from the host + // 0x00004000 [14] DEV_SUSPEND (0) Set when the device suspend state changes + // 0x00002000 [13] DEV_CONN_DIS (0) Set when the device connection state changes + // 0x00001000 [12] BUS_RESET (0) Source: SIE_STATUS + // 0x00000800 [11] VBUS_DETECT (0) Source: SIE_STATUS + // 0x00000400 [10] STALL (0) Source: SIE_STATUS + // 0x00000200 [9] ERROR_CRC (0) Source: SIE_STATUS + // 0x00000100 [8] ERROR_BIT_STUFF (0) Source: SIE_STATUS + // 0x00000080 [7] ERROR_RX_OVERFLOW (0) Source: SIE_STATUS + // 0x00000040 [6] ERROR_RX_TIMEOUT (0) Source: SIE_STATUS + // 0x00000020 [5] ERROR_DATA_SEQ (0) Source: SIE_STATUS + // 0x00000010 [4] BUFF_STATUS (0) Raised when any bit in BUFF_STATUS is set + // 0x00000008 [3] TRANS_COMPLETE (0) Raised every time SIE_STATUS + // 0x00000004 [2] HOST_SOF (0) Host: raised every time the host sends a SOF (Start of Frame) + // 0x00000002 [1] HOST_RESUME (0) Host: raised when a device wakes up the host + // 0x00000001 [0] HOST_CONN_DIS (0) Host: raised when a device is connected or disconnected (i + io_ro_32 ints; +} usb_hw_t; + +#define usb_hw ((usb_hw_t *)USBCTRL_REGS_BASE) +static_assert(sizeof (usb_hw_t) == 0x009c, ""); + +#endif // _HARDWARE_STRUCTS_USB_H + diff --git a/lib/rp2040/hardware/structs/usb.h b/lib/pico-sdk/rp2040/hardware/structs/usb_dpram.h index 0254e61d..aaa4ec58 100644 --- a/lib/rp2040/hardware/structs/usb.h +++ b/lib/pico-sdk/rp2040/hardware/structs/usb_dpram.h @@ -1,15 +1,24 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. +/** + * Copyright (c) 2024 Raspberry Pi (Trading) Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ -#ifndef _HARDWARE_STRUCTS_USB_H -#define _HARDWARE_STRUCTS_USB_H +#ifndef _HARDWARE_STRUCTS_USB_DPRAM_H +#define _HARDWARE_STRUCTS_USB_DPRAM_H #include "hardware/address_mapped.h" #include "hardware/regs/usb.h" +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_usb +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/usb.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + + // 0-15 #define USB_NUM_ENDPOINTS 16 @@ -39,10 +48,10 @@ #define EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER (1u << 28) #define EP_CTRL_INTERRUPT_ON_NAK (1u << 16) #define EP_CTRL_INTERRUPT_ON_STALL (1u << 17) -#define EP_CTRL_BUFFER_TYPE_LSB 26 -#define EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB 16 +#define EP_CTRL_BUFFER_TYPE_LSB 26u +#define EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB 16u -#define USB_DPRAM_SIZE 4096 +#define USB_DPRAM_SIZE 4096u // PICO_CONFIG: USB_DPRAM_MAX, Set amount of USB RAM used by USB system, min=0, max=4096, default=4096, group=hardware_usb // Allow user to claim some of the USB RAM for themselves @@ -111,39 +120,9 @@ typedef struct { static_assert(sizeof(usb_host_dpram_t) == USB_DPRAM_MAX, ""); static_assert(offsetof(usb_host_dpram_t, epx_data) == 0x180, ""); -typedef struct { - io_rw_32 dev_addr_ctrl; - io_rw_32 int_ep_addr_ctrl[USB_HOST_INTERRUPT_ENDPOINTS]; - io_rw_32 main_ctrl; - io_rw_32 sof_rw; - io_ro_32 sof_rd; - io_rw_32 sie_ctrl; - io_rw_32 sie_status; - io_rw_32 int_ep_ctrl; - io_rw_32 buf_status; - io_rw_32 buf_cpu_should_handle; // for double buff - io_rw_32 abort; - io_rw_32 abort_done; - io_rw_32 ep_stall_arm; - io_rw_32 nak_poll; - io_rw_32 ep_nak_stall_status; - io_rw_32 muxing; - io_rw_32 pwr; - io_rw_32 phy_direct; - io_rw_32 phy_direct_override; - io_rw_32 phy_trim; - io_rw_32 linestate_tuning; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_rw_32 ints; -} usb_hw_t; - -check_hw_layout(usb_hw_t, ints, USB_INTS_OFFSET); - -#define usb_hw ((usb_hw_t *)USBCTRL_REGS_BASE) - #define usb_dpram ((usb_device_dpram_t *)USBCTRL_DPRAM_BASE) #define usbh_dpram ((usb_host_dpram_t *)USBCTRL_DPRAM_BASE) -#endif +static_assert( USB_HOST_INTERRUPT_ENDPOINTS == 15, ""); + +#endif // _HARDWARE_STRUCTS_USB_DPRAM_H
\ No newline at end of file diff --git a/lib/pico-sdk/rp2040/hardware/structs/vreg_and_chip_reset.h b/lib/pico-sdk/rp2040/hardware/structs/vreg_and_chip_reset.h new file mode 100644 index 00000000..0f16a0a0 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/vreg_and_chip_reset.h @@ -0,0 +1,54 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H +#define _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H + +/** + * \file rp2040/vreg_and_chip_reset.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/vreg_and_chip_reset.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_vreg_and_chip_reset +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/vreg_and_chip_reset.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(VREG_AND_CHIP_RESET_VREG_OFFSET) // VREG_AND_CHIP_RESET_VREG + // Voltage regulator control and status + // 0x00001000 [12] ROK (0) regulation status + + // 0x000000f0 [7:4] VSEL (0xb) output voltage select + + // 0x00000002 [1] HIZ (0) high impedance mode select + + // 0x00000001 [0] EN (1) enable + + io_rw_32 vreg; + + _REG_(VREG_AND_CHIP_RESET_BOD_OFFSET) // VREG_AND_CHIP_RESET_BOD + // brown-out detection control + // 0x000000f0 [7:4] VSEL (0x9) threshold select + + // 0x00000001 [0] EN (1) enable + + io_rw_32 bod; + + _REG_(VREG_AND_CHIP_RESET_CHIP_RESET_OFFSET) // VREG_AND_CHIP_RESET_CHIP_RESET + // Chip reset control and status + // 0x01000000 [24] PSM_RESTART_FLAG (0) This is set by psm_restart from the debugger + // 0x00100000 [20] HAD_PSM_RESTART (0) Last reset was from the debug port + // 0x00010000 [16] HAD_RUN (0) Last reset was from the RUN pin + // 0x00000100 [8] HAD_POR (0) Last reset was from the power-on reset or brown-out... + io_rw_32 chip_reset; +} vreg_and_chip_reset_hw_t; + +#define vreg_and_chip_reset_hw ((vreg_and_chip_reset_hw_t *)VREG_AND_CHIP_RESET_BASE) +static_assert(sizeof (vreg_and_chip_reset_hw_t) == 0x000c, ""); + +#endif // _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/watchdog.h b/lib/pico-sdk/rp2040/hardware/structs/watchdog.h new file mode 100644 index 00000000..7667aa49 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/watchdog.h @@ -0,0 +1,67 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_WATCHDOG_H +#define _HARDWARE_STRUCTS_WATCHDOG_H + +/** + * \file rp2040/watchdog.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/watchdog.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_watchdog +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/watchdog.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(WATCHDOG_CTRL_OFFSET) // WATCHDOG_CTRL + // Watchdog control + // 0x80000000 [31] TRIGGER (0) Trigger a watchdog reset + // 0x40000000 [30] ENABLE (0) When not enabled the watchdog timer is paused + // 0x04000000 [26] PAUSE_DBG1 (1) Pause the watchdog timer when processor 1 is in debug mode + // 0x02000000 [25] PAUSE_DBG0 (1) Pause the watchdog timer when processor 0 is in debug mode + // 0x01000000 [24] PAUSE_JTAG (1) Pause the watchdog timer when JTAG is accessing the bus fabric + // 0x00ffffff [23:0] TIME (0x000000) Indicates the number of ticks / 2 (see errata RP2040-E1)... + io_rw_32 ctrl; + + _REG_(WATCHDOG_LOAD_OFFSET) // WATCHDOG_LOAD + // Load the watchdog timer. + // 0x00ffffff [23:0] LOAD (0x000000) + io_wo_32 load; + + _REG_(WATCHDOG_REASON_OFFSET) // WATCHDOG_REASON + // Logs the reason for the last reset. + // 0x00000002 [1] FORCE (0) + // 0x00000001 [0] TIMER (0) + io_ro_32 reason; + + // (Description copied from array index 0 register WATCHDOG_SCRATCH0 applies similarly to other array indexes) + _REG_(WATCHDOG_SCRATCH0_OFFSET) // WATCHDOG_SCRATCH0 + // Scratch register + // 0xffffffff [31:0] SCRATCH0 (0x00000000) + io_rw_32 scratch[8]; + + _REG_(WATCHDOG_TICK_OFFSET) // WATCHDOG_TICK + // Controls the tick generator + // 0x000ff800 [19:11] COUNT (-) Count down timer: the remaining number clk_tick cycles... + // 0x00000400 [10] RUNNING (-) Is the tick generator running? + // 0x00000200 [9] ENABLE (1) start / stop tick generation + // 0x000001ff [8:0] CYCLES (0x000) Total number of clk_tick cycles before the next tick + io_rw_32 tick; +} watchdog_hw_t; + +#define watchdog_hw ((watchdog_hw_t *)WATCHDOG_BASE) +static_assert(sizeof (watchdog_hw_t) == 0x0030, ""); + +#endif // _HARDWARE_STRUCTS_WATCHDOG_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/xip.h b/lib/pico-sdk/rp2040/hardware/structs/xip.h new file mode 100644 index 00000000..332e8ccf --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/xip.h @@ -0,0 +1,76 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_XIP_H +#define _HARDWARE_STRUCTS_XIP_H + +/** + * \file rp2040/xip.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/xip.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_xip +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/xip.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + _REG_(XIP_CTRL_OFFSET) // XIP_CTRL + // Cache control + // 0x00000008 [3] POWER_DOWN (0) When 1, the cache memories are powered down + // 0x00000002 [1] ERR_BADWRITE (1) When 1, writes to any alias other than 0x0 (caching,... + // 0x00000001 [0] EN (1) When 1, enable the cache + io_rw_32 ctrl; + + _REG_(XIP_FLUSH_OFFSET) // XIP_FLUSH + // Cache Flush control + // 0x00000001 [0] FLUSH (0) Write 1 to flush the cache + io_wo_32 flush; + + _REG_(XIP_STAT_OFFSET) // XIP_STAT + // Cache Status + // 0x00000004 [2] FIFO_FULL (0) When 1, indicates the XIP streaming FIFO is completely full + // 0x00000002 [1] FIFO_EMPTY (1) When 1, indicates the XIP streaming FIFO is completely empty + // 0x00000001 [0] FLUSH_READY (0) Reads as 0 while a cache flush is in progress, and 1 otherwise + io_ro_32 stat; + + _REG_(XIP_CTR_HIT_OFFSET) // XIP_CTR_HIT + // Cache Hit counter + // 0xffffffff [31:0] CTR_HIT (0x00000000) A 32 bit saturating counter that increments upon each... + io_rw_32 ctr_hit; + + _REG_(XIP_CTR_ACC_OFFSET) // XIP_CTR_ACC + // Cache Access counter + // 0xffffffff [31:0] CTR_ACC (0x00000000) A 32 bit saturating counter that increments upon each... + io_rw_32 ctr_acc; + + _REG_(XIP_STREAM_ADDR_OFFSET) // XIP_STREAM_ADDR + // FIFO stream address + // 0xfffffffc [31:2] STREAM_ADDR (0x00000000) The address of the next word to be streamed from flash... + io_rw_32 stream_addr; + + _REG_(XIP_STREAM_CTR_OFFSET) // XIP_STREAM_CTR + // FIFO stream control + // 0x003fffff [21:0] STREAM_CTR (0x000000) Write a nonzero value to start a streaming read + io_rw_32 stream_ctr; + + _REG_(XIP_STREAM_FIFO_OFFSET) // XIP_STREAM_FIFO + // FIFO stream data + // 0xffffffff [31:0] STREAM_FIFO (0x00000000) Streamed data is buffered here, for retrieval by the system DMA + io_ro_32 stream_fifo; +} xip_ctrl_hw_t; + +#define xip_ctrl_hw ((xip_ctrl_hw_t *)XIP_CTRL_BASE) +static_assert(sizeof (xip_ctrl_hw_t) == 0x0020, ""); + +#endif // _HARDWARE_STRUCTS_XIP_H + diff --git a/lib/pico-sdk/rp2040/hardware/structs/xip_ctrl.h b/lib/pico-sdk/rp2040/hardware/structs/xip_ctrl.h new file mode 100644 index 00000000..c31569b6 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/xip_ctrl.h @@ -0,0 +1,11 @@ +/** + * Copyright (c) 2024 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +// Support old header for compatibility (and if included, support old variable name) +#include "hardware/structs/xip.h" +#define XIP_STAT_FIFO_FULL XIP_STAT_FIFO_FULL_BITS +#define XIP_STAT_FIFO_EMPTY XIP_STAT_FIFO_EMPTY_BITS +#define XIP_STAT_FLUSH_RDY XIP_STAT_FLUSH_READY_BITS diff --git a/lib/pico-sdk/rp2040/hardware/structs/xosc.h b/lib/pico-sdk/rp2040/hardware/structs/xosc.h new file mode 100644 index 00000000..ee5a234f --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/xosc.h @@ -0,0 +1,66 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_XOSC_H +#define _HARDWARE_STRUCTS_XOSC_H + +/** + * \file rp2040/xosc.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/xosc.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_xosc +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/xosc.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +/// \tag::xosc_hw[] +typedef struct { + _REG_(XOSC_CTRL_OFFSET) // XOSC_CTRL + // Crystal Oscillator Control + // 0x00fff000 [23:12] ENABLE (-) On power-up this field is initialised to DISABLE and the... + // 0x00000fff [11:0] FREQ_RANGE (-) Frequency range + io_rw_32 ctrl; + + _REG_(XOSC_STATUS_OFFSET) // XOSC_STATUS + // Crystal Oscillator Status + // 0x80000000 [31] STABLE (0) Oscillator is running and stable + // 0x01000000 [24] BADWRITE (0) An invalid value has been written to CTRL_ENABLE or... + // 0x00001000 [12] ENABLED (-) Oscillator is enabled but not necessarily running and... + // 0x00000003 [1:0] FREQ_RANGE (-) The current frequency range setting, always reads 0 + io_rw_32 status; + + _REG_(XOSC_DORMANT_OFFSET) // XOSC_DORMANT + // Crystal Oscillator pause control + // 0xffffffff [31:0] DORMANT (-) This is used to save power by pausing the XOSC + + io_rw_32 dormant; + + _REG_(XOSC_STARTUP_OFFSET) // XOSC_STARTUP + // Controls the startup delay + // 0x00100000 [20] X4 (-) Multiplies the startup_delay by 4 + // 0x00003fff [13:0] DELAY (-) in multiples of 256*xtal_period + io_rw_32 startup; + + uint32_t _pad0[3]; + + _REG_(XOSC_COUNT_OFFSET) // XOSC_COUNT + // A down counter running at the XOSC frequency which counts to zero and stops. + // 0x000000ff [7:0] COUNT (0x00) + io_rw_32 count; +} xosc_hw_t; +/// \end::xosc_hw[] + +#define xosc_hw ((xosc_hw_t *)XOSC_BASE) +static_assert(sizeof (xosc_hw_t) == 0x0020, ""); + +#endif // _HARDWARE_STRUCTS_XOSC_H + diff --git a/lib/pico-sdk/rp2040/pico/asm_helper.S b/lib/pico-sdk/rp2040/pico/asm_helper.S new file mode 100644 index 00000000..59c67db1 --- /dev/null +++ b/lib/pico-sdk/rp2040/pico/asm_helper.S @@ -0,0 +1,52 @@ +/* + * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +//#include "pico.h" + +# note we don't do this by default in this file for backwards comaptibility with user code +# that may include this file, but not use unified syntax. Note that this macro does equivalent +# setup to the pico_default_asm macro for inline assembly in C code. +.macro pico_default_asm_setup +.syntax unified +.cpu cortex-m0plus +.thumb +.endm + +// do not put align in here as it is used mid function sometimes +.macro regular_func x +.global \x +.type \x,%function +.thumb_func +\x: +.endm + +.macro weak_func x +.weak \x +.type \x,%function +.thumb_func +\x: +.endm + +.macro regular_func_with_section x +.section .text.\x +regular_func \x +.endm + +// do not put align in here as it is used mid function sometimes +.macro wrapper_func x +regular_func WRAPPER_FUNC_NAME(\x) +.endm + +.macro weak_wrapper_func x +weak_func WRAPPER_FUNC_NAME(\x) +.endm + +# backwards compatibility +.macro __pre_init func, priority_string +.section .preinit_array.\priority_string +.p2align 2 +.word \func +.endm diff --git a/lib/rp2040/cmsis_include/RP2040.h b/lib/rp2040/cmsis_include/RP2040.h deleted file mode 100644 index a29b9e09..00000000 --- a/lib/rp2040/cmsis_include/RP2040.h +++ /dev/null @@ -1,109 +0,0 @@ -/*************************************************************************//** - * @file RP2040.h - * @brief CMSIS-Core(M) Device Peripheral Access Layer Header File for - * Device RP2040 - * @version V1.0.0 - * @date 5. May 2021 - *****************************************************************************/ -/* - * Copyright (c) 2009-2021 Arm Limited. All rights reserved. - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the License); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an AS IS BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _CMSIS_RP2040_H_ -#define _CMSIS_RP2040_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* =========================================================================================================================== */ -/* ================ Interrupt Number Definition ================ */ -/* =========================================================================================================================== */ - -typedef enum -{ - /* ======================================= ARM Cortex-M0+ Specific Interrupt Numbers ======================================= */ - Reset_IRQn = -15, /*!< -15 Reset Vector, invoked on Power up and warm reset */ - NonMaskableInt_IRQn = -14, /*!< -14 Non maskable Interrupt, cannot be stopped or preempted */ - HardFault_IRQn = -13, /*!< -13 Hard Fault, all classes of Fault */ - SVCall_IRQn = -5, /*!< -5 System Service Call via SVC instruction */ - PendSV_IRQn = -2, /*!< -2 Pendable request for system service */ - SysTick_IRQn = -1, /*!< -1 System Tick Timer */ - /* =========================================== RP2040 Specific Interrupt Numbers =========================================== */ - TIMER_IRQ_0_IRQn = 0, /*!< 0 TIMER_IRQ_0 */ - TIMER_IRQ_1_IRQn = 1, /*!< 1 TIMER_IRQ_1 */ - TIMER_IRQ_2_IRQn = 2, /*!< 2 TIMER_IRQ_2 */ - TIMER_IRQ_3_IRQn = 3, /*!< 3 TIMER_IRQ_3 */ - PWM_IRQ_WRAP_IRQn = 4, /*!< 4 PWM_IRQ_WRAP */ - USBCTRL_IRQ_IRQn = 5, /*!< 5 USBCTRL_IRQ */ - XIP_IRQ_IRQn = 6, /*!< 6 XIP_IRQ */ - PIO0_IRQ_0_IRQn = 7, /*!< 7 PIO0_IRQ_0 */ - PIO0_IRQ_1_IRQn = 8, /*!< 8 PIO0_IRQ_1 */ - PIO1_IRQ_0_IRQn = 9, /*!< 9 PIO1_IRQ_0 */ - PIO1_IRQ_1_IRQn = 10, /*!< 10 PIO1_IRQ_1 */ - DMA_IRQ_0_IRQn = 11, /*!< 11 DMA_IRQ_0 */ - DMA_IRQ_1_IRQn = 12, /*!< 12 DMA_IRQ_1 */ - IO_IRQ_BANK0_IRQn = 13, /*!< 13 IO_IRQ_BANK0 */ - IO_IRQ_QSPI_IRQn = 14, /*!< 14 IO_IRQ_QSPI */ - SIO_IRQ_PROC0_IRQn = 15, /*!< 15 SIO_IRQ_PROC0 */ - SIO_IRQ_PROC1_IRQn = 16, /*!< 16 SIO_IRQ_PROC1 */ - CLOCKS_IRQ_IRQn = 17, /*!< 17 CLOCKS_IRQ */ - SPI0_IRQ_IRQn = 18, /*!< 18 SPI0_IRQ */ - SPI1_IRQ_IRQn = 19, /*!< 19 SPI1_IRQ */ - UART0_IRQ_IRQn = 20, /*!< 20 UART0_IRQ */ - UART1_IRQ_IRQn = 21, /*!< 21 UART1_IRQ */ - ADC_IRQ_FIFO_IRQn = 22, /*!< 22 ADC_IRQ_FIFO */ - I2C0_IRQ_IRQn = 23, /*!< 23 I2C0_IRQ */ - I2C1_IRQ_IRQn = 24, /*!< 24 I2C1_IRQ */ - RTC_IRQ_IRQn = 25 /*!< 25 RTC_IRQ */ -} IRQn_Type; - -/* =========================================================================================================================== */ -/* ================ Processor and Core Peripheral Section ================ */ -/* =========================================================================================================================== */ - -/* ========================== Configuration of the ARM Cortex-M0+ Processor and Core Peripherals =========================== */ -#define __CM0PLUS_REV 0x0001U /*!< CM0PLUS Core Revision */ -#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ -#define __VTOR_PRESENT 1 /*!< Set to 1 if CPU supports Vector Table Offset Register */ -#define __MPU_PRESENT 1 /*!< MPU present */ -#define __FPU_PRESENT 0 /*!< FPU present */ - -/** @} */ /* End of group Configuration_of_CMSIS */ - -#include "core_cm0plus.h" /*!< ARM Cortex-M0+ processor and core peripherals */ -#include "system_RP2040.h" /*!< RP2040 System */ - -#ifndef __IM /*!< Fallback for older CMSIS versions */ -#define __IM __I -#endif -#ifndef __OM /*!< Fallback for older CMSIS versions */ -#define __OM __O -#endif -#ifndef __IOM /*!< Fallback for older CMSIS versions */ -#define __IOM __IO -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* _CMSIS_RP2040_H */ diff --git a/lib/rp2040/hardware/platform_defs.h b/lib/rp2040/hardware/platform_defs.h deleted file mode 100644 index 437594c9..00000000 --- a/lib/rp2040/hardware/platform_defs.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_PLATFORM_DEFS_H -#define _HARDWARE_PLATFORM_DEFS_H - -// This header is included from C and assembler - only define macros - -#ifndef _u -#ifdef __ASSEMBLER__ -#define _u(x) x -#else -#define _u(x) x ## u -#endif -#endif - -#define NUM_CORES _u(2) -#define NUM_DMA_CHANNELS _u(12) -#define NUM_IRQS _u(32) -#define NUM_PIOS _u(2) -#define NUM_PIO_STATE_MACHINES _u(4) -#define NUM_PWM_SLICES _u(8) -#define NUM_SPIN_LOCKS _u(32) -#define NUM_UARTS _u(2) -#define NUM_I2CS _u(2) -#define NUM_SPIS _u(2) - -#define NUM_ADC_CHANNELS _u(5) - -#define NUM_BANK0_GPIOS _u(30) - -#define PIO_INSTRUCTION_COUNT _u(32) - -#define XOSC_MHZ _u(12) - -// PICO_CONFIG: PICO_STACK_SIZE, Stack Size, min=0x100, default=0x800, advanced=true, group=pico_standard_link -#ifndef PICO_STACK_SIZE -#define PICO_STACK_SIZE _u(0x800) -#endif - -// PICO_CONFIG: PICO_HEAP_SIZE, Heap size to reserve, min=0x100, default=0x800, advanced=true, group=pico_standard_link -#ifndef PICO_HEAP_SIZE -#define PICO_HEAP_SIZE _u(0x800) -#endif - -// PICO_CONFIG: PICO_NO_RAM_VECTOR_TABLE, Enable/disable the RAM vector table, type=bool, default=0, advanced=true, group=pico_runtime -#ifndef PICO_NO_RAM_VECTOR_TABLE -#define PICO_NO_RAM_VECTOR_TABLE 0 -#endif - -#endif - diff --git a/lib/rp2040/hardware/regs/dreq.h b/lib/rp2040/hardware/regs/dreq.h deleted file mode 100644 index 9de9dd5f..00000000 --- a/lib/rp2040/hardware/regs/dreq.h +++ /dev/null @@ -1,50 +0,0 @@ -/** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _DREQ_H_ -#define _DREQ_H_ - -#define DREQ_PIO0_TX0 0x0 -#define DREQ_PIO0_TX1 0x1 -#define DREQ_PIO0_TX2 0x2 -#define DREQ_PIO0_TX3 0x3 -#define DREQ_PIO0_RX0 0x4 -#define DREQ_PIO0_RX1 0x5 -#define DREQ_PIO0_RX2 0x6 -#define DREQ_PIO0_RX3 0x7 -#define DREQ_PIO1_TX0 0x8 -#define DREQ_PIO1_TX1 0x9 -#define DREQ_PIO1_TX2 0xa -#define DREQ_PIO1_TX3 0xb -#define DREQ_PIO1_RX0 0xc -#define DREQ_PIO1_RX1 0xd -#define DREQ_PIO1_RX2 0xe -#define DREQ_PIO1_RX3 0xf -#define DREQ_SPI0_TX 0x10 -#define DREQ_SPI0_RX 0x11 -#define DREQ_SPI1_TX 0x12 -#define DREQ_SPI1_RX 0x13 -#define DREQ_UART0_TX 0x14 -#define DREQ_UART0_RX 0x15 -#define DREQ_UART1_TX 0x16 -#define DREQ_UART1_RX 0x17 -#define DREQ_PWM_WRAP0 0x18 -#define DREQ_PWM_WRAP1 0x19 -#define DREQ_PWM_WRAP2 0x1a -#define DREQ_PWM_WRAP3 0x1b -#define DREQ_PWM_WRAP4 0x1c -#define DREQ_PWM_WRAP5 0x1d -#define DREQ_PWM_WRAP6 0x1e -#define DREQ_PWM_WRAP7 0x1f -#define DREQ_I2C0_TX 0x20 -#define DREQ_I2C0_RX 0x21 -#define DREQ_I2C1_TX 0x22 -#define DREQ_I2C1_RX 0x23 -#define DREQ_ADC 0x24 -#define DREQ_XIP_STREAM 0x25 -#define DREQ_XIP_SSITX 0x26 -#define DREQ_XIP_SSIRX 0x27 - -#endif // _DREQ_H_ diff --git a/lib/rp2040/hardware/regs/intctrl.h b/lib/rp2040/hardware/regs/intctrl.h deleted file mode 100644 index dec7e36e..00000000 --- a/lib/rp2040/hardware/regs/intctrl.h +++ /dev/null @@ -1,63 +0,0 @@ -/** - * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _INTCTRL_H_ -#define _INTCTRL_H_ - -#define TIMER_IRQ_0 0 -#define TIMER_IRQ_1 1 -#define TIMER_IRQ_2 2 -#define TIMER_IRQ_3 3 -#define PWM_IRQ_WRAP 4 -#define USBCTRL_IRQ 5 -#define XIP_IRQ 6 -#define PIO0_IRQ_0 7 -#define PIO0_IRQ_1 8 -#define PIO1_IRQ_0 9 -#define PIO1_IRQ_1 10 -#define DMA_IRQ_0 11 -#define DMA_IRQ_1 12 -#define IO_IRQ_BANK0 13 -#define IO_IRQ_QSPI 14 -#define SIO_IRQ_PROC0 15 -#define SIO_IRQ_PROC1 16 -#define CLOCKS_IRQ 17 -#define SPI0_IRQ 18 -#define SPI1_IRQ 19 -#define UART0_IRQ 20 -#define UART1_IRQ 21 -#define ADC_IRQ_FIFO 22 -#define I2C0_IRQ 23 -#define I2C1_IRQ 24 -#define RTC_IRQ 25 - -#define isr_timer_0 isr_irq0 -#define isr_timer_1 isr_irq1 -#define isr_timer_2 isr_irq2 -#define isr_timer_3 isr_irq3 -#define isr_pwm_wrap isr_irq4 -#define isr_usbctrl isr_irq5 -#define isr_xip isr_irq6 -#define isr_pio0_0 isr_irq7 -#define isr_pio0_1 isr_irq8 -#define isr_pio1_0 isr_irq9 -#define isr_pio1_1 isr_irq10 -#define isr_dma_0 isr_irq11 -#define isr_dma_1 isr_irq12 -#define isr_io_bank0 isr_irq13 -#define isr_io_qspi isr_irq14 -#define isr_sio_proc0 isr_irq15 -#define isr_sio_proc1 isr_irq16 -#define isr_clocks isr_irq17 -#define isr_spi0 isr_irq18 -#define isr_spi1 isr_irq19 -#define isr_uart0 isr_irq20 -#define isr_uart1 isr_irq21 -#define isr_adc_fifo isr_irq22 -#define isr_i2c0 isr_irq23 -#define isr_i2c1 isr_irq24 -#define isr_rtc isr_irq25 - -#endif // _INTCTRL_H_ diff --git a/lib/rp2040/hardware/structs/adc.h b/lib/rp2040/hardware/structs/adc.h deleted file mode 100644 index 559b5f17..00000000 --- a/lib/rp2040/hardware/structs/adc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _HARDWARE_STRUCTS_ADC_H -#define _HARDWARE_STRUCTS_ADC_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/adc.h" - -typedef struct { - io_rw_32 cs; - io_rw_32 result; - io_rw_32 fcs; - io_rw_32 fifo; - io_rw_32 div; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_rw_32 ints; -} adc_hw_t; - -check_hw_layout(adc_hw_t, ints, ADC_INTS_OFFSET); - -#define adc_hw ((adc_hw_t *const)ADC_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/bus_ctrl.h b/lib/rp2040/hardware/structs/bus_ctrl.h deleted file mode 100644 index ce95a7c1..00000000 --- a/lib/rp2040/hardware/structs/bus_ctrl.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _HARDWARE_STRUCTS_BUS_CTRL_H -#define _HARDWARE_STRUCTS_BUS_CTRL_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/busctrl.h" - -enum bus_ctrl_perf_counter { - arbiter_rom_perf_event_access = 19, - arbiter_rom_perf_event_access_contested = 18, - arbiter_xip_main_perf_event_access = 17, - arbiter_xip_main_perf_event_access_contested = 16, - arbiter_sram0_perf_event_access = 15, - arbiter_sram0_perf_event_access_contested = 14, - arbiter_sram1_perf_event_access = 13, - arbiter_sram1_perf_event_access_contested = 12, - arbiter_sram2_perf_event_access = 11, - arbiter_sram2_perf_event_access_contested = 10, - arbiter_sram3_perf_event_access = 9, - arbiter_sram3_perf_event_access_contested = 8, - arbiter_sram4_perf_event_access = 7, - arbiter_sram4_perf_event_access_contested = 6, - arbiter_sram5_perf_event_access = 5, - arbiter_sram5_perf_event_access_contested = 4, - arbiter_fastperi_perf_event_access = 3, - arbiter_fastperi_perf_event_access_contested = 2, - arbiter_apb_perf_event_access = 1, - arbiter_apb_perf_event_access_contested = 0 -}; - -typedef struct { - io_rw_32 priority; - io_ro_32 priority_ack; - struct { - io_rw_32 value; - io_rw_32 sel; - } counter[4]; -} bus_ctrl_hw_t; - -check_hw_layout(bus_ctrl_hw_t, counter[0].value, BUSCTRL_PERFCTR0_OFFSET); - -#define bus_ctrl_hw ((bus_ctrl_hw_t *const)BUSCTRL_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/clocks.h b/lib/rp2040/hardware/structs/clocks.h deleted file mode 100644 index 489876d1..00000000 --- a/lib/rp2040/hardware/structs/clocks.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_CLOCKS_H -#define _HARDWARE_STRUCTS_CLOCKS_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/clocks.h" - -/*! \brief Enumeration identifying a hardware clock - * \ingroup hardware_clocks - */ -/// \tag::clkenum[] -enum clock_index { - clk_gpout0 = 0, ///< GPIO Muxing 0 - clk_gpout1, ///< GPIO Muxing 1 - clk_gpout2, ///< GPIO Muxing 2 - clk_gpout3, ///< GPIO Muxing 3 - clk_ref, ///< Watchdog and timers reference clock - clk_sys, ///< Processors, bus fabric, memory, memory mapped registers - clk_peri, ///< Peripheral clock for UART and SPI - clk_usb, ///< USB clock - clk_adc, ///< ADC clock - clk_rtc, ///< Real time clock - CLK_COUNT -}; -/// \end::clkenum[] - -/// \tag::clock_hw[] -typedef struct { - io_rw_32 ctrl; - io_rw_32 div; - io_rw_32 selected; -} clock_hw_t; -/// \end::clock_hw[] - -typedef struct { - io_rw_32 ref_khz; - io_rw_32 min_khz; - io_rw_32 max_khz; - io_rw_32 delay; - io_rw_32 interval; - io_rw_32 src; - io_ro_32 status; - io_ro_32 result; -} fc_hw_t; - -typedef struct { - clock_hw_t clk[CLK_COUNT]; - struct { - io_rw_32 ctrl; - io_rw_32 status; - } resus; - fc_hw_t fc0; - io_rw_32 wake_en0; - io_rw_32 wake_en1; - io_rw_32 sleep_en0; - io_rw_32 sleep_en1; - io_rw_32 enabled0; - io_rw_32 enabled1; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_rw_32 ints; -} clocks_hw_t; - -#define clocks_hw ((clocks_hw_t *const)CLOCKS_BASE) -#endif diff --git a/lib/rp2040/hardware/structs/dma.h b/lib/rp2040/hardware/structs/dma.h deleted file mode 100644 index 06cdf792..00000000 --- a/lib/rp2040/hardware/structs/dma.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_DMA_H -#define _HARDWARE_STRUCTS_DMA_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/dma.h" - -typedef struct { - io_rw_32 read_addr; - io_rw_32 write_addr; - io_rw_32 transfer_count; - io_rw_32 ctrl_trig; - io_rw_32 al1_ctrl; - io_rw_32 al1_read_addr; - io_rw_32 al1_write_addr; - io_rw_32 al1_transfer_count_trig; - io_rw_32 al2_ctrl; - io_rw_32 al2_transfer_count; - io_rw_32 al2_read_addr; - io_rw_32 al2_write_addr_trig; - io_rw_32 al3_ctrl; - io_rw_32 al3_write_addr; - io_rw_32 al3_transfer_count; - io_rw_32 al3_read_addr_trig; -} dma_channel_hw_t; - -typedef struct { - dma_channel_hw_t ch[NUM_DMA_CHANNELS]; - uint32_t _pad0[16 * (16 - NUM_DMA_CHANNELS)]; - io_ro_32 intr; - io_rw_32 inte0; - io_rw_32 intf0; - io_rw_32 ints0; - uint32_t _pad1[1]; - io_rw_32 inte1; - io_rw_32 intf1; - io_rw_32 ints1; - io_rw_32 timer[4]; - io_wo_32 multi_channel_trigger; - io_rw_32 sniff_ctrl; - io_rw_32 sniff_data; - uint32_t _pad2[1]; - io_ro_32 fifo_levels; - io_wo_32 abort; -} dma_hw_t; - -typedef struct { - struct dma_debug_hw_channel { - io_ro_32 ctrdeq; - io_ro_32 tcr; - uint32_t pad[14]; - } ch[NUM_DMA_CHANNELS]; -} dma_debug_hw_t; - -#define dma_hw ((dma_hw_t *const)DMA_BASE) -#define dma_debug_hw ((dma_debug_hw_t *const)(DMA_BASE + DMA_CH0_DBG_CTDREQ_OFFSET)) - -#endif diff --git a/lib/rp2040/hardware/structs/i2c.h b/lib/rp2040/hardware/structs/i2c.h deleted file mode 100644 index 1a58c50d..00000000 --- a/lib/rp2040/hardware/structs/i2c.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_I2C_H -#define _HARDWARE_STRUCTS_I2C_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/i2c.h" - -typedef struct { - io_rw_32 con; - io_rw_32 tar; - io_rw_32 sar; - uint32_t _pad0; - io_rw_32 data_cmd; - io_rw_32 ss_scl_hcnt; - io_rw_32 ss_scl_lcnt; - io_rw_32 fs_scl_hcnt; - io_rw_32 fs_scl_lcnt; - uint32_t _pad1[2]; - io_rw_32 intr_stat; - io_rw_32 intr_mask; - io_rw_32 raw_intr_stat; - io_rw_32 rx_tl; - io_rw_32 tx_tl; - io_rw_32 clr_intr; - io_rw_32 clr_rx_under; - io_rw_32 clr_rx_over; - io_rw_32 clr_tx_over; - io_rw_32 clr_rd_req; - io_rw_32 clr_tx_abrt; - io_rw_32 clr_rx_done; - io_rw_32 clr_activity; - io_rw_32 clr_stop_det; - io_rw_32 clr_start_det; - io_rw_32 clr_gen_call; - io_rw_32 enable; - io_rw_32 status; - io_rw_32 txflr; - io_rw_32 rxflr; - io_rw_32 sda_hold; - io_rw_32 tx_abrt_source; - io_rw_32 slv_data_nack_only; - io_rw_32 dma_cr; - io_rw_32 dma_tdlr; - io_rw_32 dma_rdlr; - io_rw_32 sda_setup; - io_rw_32 ack_general_call; - io_rw_32 enable_status; - io_rw_32 fs_spklen; - uint32_t _pad2; - io_rw_32 clr_restart_det; -} i2c_hw_t; - -#define i2c0_hw ((i2c_hw_t *const)I2C0_BASE) -#define i2c1_hw ((i2c_hw_t *const)I2C1_BASE) - -// List of configuration constants for the Synopsys I2C hardware (you may see -// references to these in I2C register header; these are *fixed* values, -// set at hardware design time): - -// IC_ULTRA_FAST_MODE ................ 0x0 -// IC_UFM_TBUF_CNT_DEFAULT ........... 0x8 -// IC_UFM_SCL_LOW_COUNT .............. 0x0008 -// IC_UFM_SCL_HIGH_COUNT ............. 0x0006 -// IC_TX_TL .......................... 0x0 -// IC_TX_CMD_BLOCK ................... 0x1 -// IC_HAS_DMA ........................ 0x1 -// IC_HAS_ASYNC_FIFO ................. 0x0 -// IC_SMBUS_ARP ...................... 0x0 -// IC_FIRST_DATA_BYTE_STATUS ......... 0x1 -// IC_INTR_IO ........................ 0x1 -// IC_MASTER_MODE .................... 0x1 -// IC_DEFAULT_ACK_GENERAL_CALL ....... 0x1 -// IC_INTR_POL ....................... 0x1 -// IC_OPTIONAL_SAR ................... 0x0 -// IC_DEFAULT_TAR_SLAVE_ADDR ......... 0x055 -// IC_DEFAULT_SLAVE_ADDR ............. 0x055 -// IC_DEFAULT_HS_SPKLEN .............. 0x1 -// IC_FS_SCL_HIGH_COUNT .............. 0x0006 -// IC_HS_SCL_LOW_COUNT ............... 0x0008 -// IC_DEVICE_ID_VALUE ................ 0x0 -// IC_10BITADDR_MASTER ............... 0x0 -// IC_CLK_FREQ_OPTIMIZATION .......... 0x0 -// IC_DEFAULT_FS_SPKLEN .............. 0x7 -// IC_ADD_ENCODED_PARAMS ............. 0x0 -// IC_DEFAULT_SDA_HOLD ............... 0x000001 -// IC_DEFAULT_SDA_SETUP .............. 0x64 -// IC_AVOID_RX_FIFO_FLUSH_ON_TX_ABRT . 0x0 -// IC_CLOCK_PERIOD ................... 100 -// IC_EMPTYFIFO_HOLD_MASTER_EN ....... 1 -// IC_RESTART_EN ..................... 0x1 -// IC_TX_CMD_BLOCK_DEFAULT ........... 0x0 -// IC_BUS_CLEAR_FEATURE .............. 0x0 -// IC_CAP_LOADING .................... 100 -// IC_FS_SCL_LOW_COUNT ............... 0x000d -// APB_DATA_WIDTH .................... 32 -// IC_SDA_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff -// IC_SLV_DATA_NACK_ONLY ............. 0x1 -// IC_10BITADDR_SLAVE ................ 0x0 -// IC_CLK_TYPE ....................... 0x0 -// IC_SMBUS_UDID_MSB ................. 0x0 -// IC_SMBUS_SUSPEND_ALERT ............ 0x0 -// IC_HS_SCL_HIGH_COUNT .............. 0x0006 -// IC_SLV_RESTART_DET_EN ............. 0x1 -// IC_SMBUS .......................... 0x0 -// IC_OPTIONAL_SAR_DEFAULT ........... 0x0 -// IC_PERSISTANT_SLV_ADDR_DEFAULT .... 0x0 -// IC_USE_COUNTS ..................... 0x0 -// IC_RX_BUFFER_DEPTH ................ 16 -// IC_SCL_STUCK_TIMEOUT_DEFAULT ...... 0xffffffff -// IC_RX_FULL_HLD_BUS_EN ............. 0x1 -// IC_SLAVE_DISABLE .................. 0x1 -// IC_RX_TL .......................... 0x0 -// IC_DEVICE_ID ...................... 0x0 -// IC_HC_COUNT_VALUES ................ 0x0 -// I2C_DYNAMIC_TAR_UPDATE ............ 0 -// IC_SMBUS_CLK_LOW_MEXT_DEFAULT ..... 0xffffffff -// IC_SMBUS_CLK_LOW_SEXT_DEFAULT ..... 0xffffffff -// IC_HS_MASTER_CODE ................. 0x1 -// IC_SMBUS_RST_IDLE_CNT_DEFAULT ..... 0xffff -// IC_SMBUS_UDID_LSB_DEFAULT ......... 0xffffffff -// IC_SS_SCL_HIGH_COUNT .............. 0x0028 -// IC_SS_SCL_LOW_COUNT ............... 0x002f -// IC_MAX_SPEED_MODE ................. 0x2 -// IC_STAT_FOR_CLK_STRETCH ........... 0x0 -// IC_STOP_DET_IF_MASTER_ACTIVE ...... 0x0 -// IC_DEFAULT_UFM_SPKLEN ............. 0x1 -// IC_TX_BUFFER_DEPTH ................ 16 - -#endif diff --git a/lib/rp2040/hardware/structs/interp.h b/lib/rp2040/hardware/structs/interp.h deleted file mode 100644 index 68375073..00000000 --- a/lib/rp2040/hardware/structs/interp.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_INTERP_H -#define _HARDWARE_STRUCTS_INTERP_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/sio.h" - -typedef struct { - io_rw_32 accum[2]; - io_rw_32 base[3]; - io_ro_32 pop[3]; - io_ro_32 peek[3]; - io_rw_32 ctrl[2]; - io_rw_32 add_raw[2]; - io_wo_32 base01; -} interp_hw_t; - -#define interp_hw_array ((interp_hw_t *)(SIO_BASE + SIO_INTERP0_ACCUM0_OFFSET)) -#define interp0_hw (&interp_hw_array[0]) -#define interp1_hw (&interp_hw_array[1]) - -#endif diff --git a/lib/rp2040/hardware/structs/iobank0.h b/lib/rp2040/hardware/structs/iobank0.h deleted file mode 100644 index b19800fa..00000000 --- a/lib/rp2040/hardware/structs/iobank0.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_IOBANK0_H -#define _HARDWARE_STRUCTS_IOBANK0_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/io_bank0.h" - -typedef struct { - io_rw_32 inte[4]; - io_rw_32 intf[4]; - io_rw_32 ints[4]; -} io_irq_ctrl_hw_t; - -/// \tag::iobank0_hw[] -typedef struct { - struct { - io_rw_32 status; - io_rw_32 ctrl; - } io[30]; - io_rw_32 intr[4]; - io_irq_ctrl_hw_t proc0_irq_ctrl; - io_irq_ctrl_hw_t proc1_irq_ctrl; - io_irq_ctrl_hw_t dormant_wake_irq_ctrl; -} iobank0_hw_t; -/// \end::iobank0_hw[] - -#define iobank0_hw ((iobank0_hw_t *const)IO_BANK0_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/ioqspi.h b/lib/rp2040/hardware/structs/ioqspi.h deleted file mode 100644 index 48d08a7c..00000000 --- a/lib/rp2040/hardware/structs/ioqspi.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_IOQSPI_H -#define _HARDWARE_STRUCTS_IOQSPI_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/io_qspi.h" - -typedef struct { - struct { - io_rw_32 status; - io_rw_32 ctrl; - } io[6]; -} ioqspi_hw_t; - -#define ioqspi_hw ((ioqspi_hw_t *const)IO_QSPI_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/mpu.h b/lib/rp2040/hardware/structs/mpu.h deleted file mode 100644 index 34e5c39e..00000000 --- a/lib/rp2040/hardware/structs/mpu.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_MPU_H -#define _HARDWARE_STRUCTS_MPU_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/m0plus.h" - -typedef struct { - io_ro_32 type; - io_rw_32 ctrl; - io_rw_32 rnr; - io_rw_32 rbar; - io_rw_32 rasr; -} mpu_hw_t; - -#define mpu_hw ((mpu_hw_t *const)(PPB_BASE + M0PLUS_MPU_TYPE_OFFSET)) - -#endif diff --git a/lib/rp2040/hardware/structs/pads_qspi.h b/lib/rp2040/hardware/structs/pads_qspi.h deleted file mode 100644 index 451d7ebc..00000000 --- a/lib/rp2040/hardware/structs/pads_qspi.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PADS_QSPI_H -#define _HARDWARE_STRUCTS_PADS_QSPI_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/pads_qspi.h" - -typedef struct { - io_rw_32 voltage_select; - io_rw_32 io[6]; -} pads_qspi_hw_t; - -#define pads_qspi_hw ((pads_qspi_hw_t *const)PADS_QSPI_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/padsbank0.h b/lib/rp2040/hardware/structs/padsbank0.h deleted file mode 100644 index f56dc401..00000000 --- a/lib/rp2040/hardware/structs/padsbank0.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PADSBANK0_H -#define _HARDWARE_STRUCTS_PADSBANK0_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/pads_bank0.h" - -typedef struct { - io_rw_32 voltage_select; - io_rw_32 io[30]; -} padsbank0_hw_t; - -#define padsbank0_hw ((padsbank0_hw_t *)PADS_BANK0_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/pio.h b/lib/rp2040/hardware/structs/pio.h deleted file mode 100644 index 176863bb..00000000 --- a/lib/rp2040/hardware/structs/pio.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PIO_H -#define _HARDWARE_STRUCTS_PIO_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/pio.h" - -typedef struct { - io_rw_32 ctrl; - io_ro_32 fstat; - io_rw_32 fdebug; - io_ro_32 flevel; - io_wo_32 txf[NUM_PIO_STATE_MACHINES]; - io_ro_32 rxf[NUM_PIO_STATE_MACHINES]; - io_rw_32 irq; - io_wo_32 irq_force; - io_rw_32 input_sync_bypass; - io_rw_32 dbg_padout; - io_rw_32 dbg_padoe; - io_rw_32 dbg_cfginfo; - io_wo_32 instr_mem[32]; - struct pio_sm_hw { - io_rw_32 clkdiv; - io_rw_32 execctrl; - io_rw_32 shiftctrl; - io_ro_32 addr; - io_rw_32 instr; - io_rw_32 pinctrl; - } sm[NUM_PIO_STATE_MACHINES]; - io_rw_32 intr; - io_rw_32 inte0; - io_rw_32 intf0; - io_ro_32 ints0; - io_rw_32 inte1; - io_rw_32 intf1; - io_ro_32 ints1; -} pio_hw_t; - -#define pio0_hw ((pio_hw_t *const)PIO0_BASE) -#define pio1_hw ((pio_hw_t *const)PIO1_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/pll.h b/lib/rp2040/hardware/structs/pll.h deleted file mode 100644 index 4d5b5b78..00000000 --- a/lib/rp2040/hardware/structs/pll.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PLL_H -#define _HARDWARE_STRUCTS_PLL_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/pll.h" - -/// \tag::pll_hw[] -typedef struct { - io_rw_32 cs; - io_rw_32 pwr; - io_rw_32 fbdiv_int; - io_rw_32 prim; -} pll_hw_t; - -#define pll_sys_hw ((pll_hw_t *const)PLL_SYS_BASE) -#define pll_usb_hw ((pll_hw_t *const)PLL_USB_BASE) -/// \end::pll_hw[] - -#endif diff --git a/lib/rp2040/hardware/structs/psm.h b/lib/rp2040/hardware/structs/psm.h deleted file mode 100644 index cc9fb97e..00000000 --- a/lib/rp2040/hardware/structs/psm.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PSM_H -#define _HARDWARE_STRUCTS_PSM_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/psm.h" - -typedef struct { - io_rw_32 frce_on; - io_rw_32 frce_off; - io_rw_32 wdsel; - io_rw_32 done; -} psm_hw_t; - -#define psm_hw ((psm_hw_t *const)PSM_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/pwm.h b/lib/rp2040/hardware/structs/pwm.h deleted file mode 100644 index 54995610..00000000 --- a/lib/rp2040/hardware/structs/pwm.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_PWM_H -#define _HARDWARE_STRUCTS_PWM_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/pwm.h" - -typedef struct pwm_slice_hw { - io_rw_32 csr; - io_rw_32 div; - io_rw_32 ctr; - io_rw_32 cc; - io_rw_32 top; -} pwm_slice_hw_t; - -typedef struct { - pwm_slice_hw_t slice[NUM_PWM_SLICES]; - io_rw_32 en; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_rw_32 ints; -} pwm_hw_t; - -#define pwm_hw ((pwm_hw_t *const)PWM_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/resets.h b/lib/rp2040/hardware/structs/resets.h deleted file mode 100644 index a96ddebd..00000000 --- a/lib/rp2040/hardware/structs/resets.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _HARDWARE_STRUCTS_RESETS_H -#define _HARDWARE_STRUCTS_RESETS_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/resets.h" - -/// \tag::resets_hw[] -typedef struct { - io_rw_32 reset; - io_rw_32 wdsel; - io_rw_32 reset_done; -} resets_hw_t; - -#define resets_hw ((resets_hw_t *const)RESETS_BASE) -/// \end::resets_hw[] - -#endif diff --git a/lib/rp2040/hardware/structs/rosc.h b/lib/rp2040/hardware/structs/rosc.h deleted file mode 100644 index 10543937..00000000 --- a/lib/rp2040/hardware/structs/rosc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_ROSC_H -#define _HARDWARE_STRUCTS_ROSC_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/rosc.h" - -typedef struct { - io_rw_32 ctrl; - io_rw_32 freqa; - io_rw_32 freqb; - io_rw_32 dormant; - io_rw_32 div; - io_rw_32 phase; - io_rw_32 status; - io_rw_32 randombit; - io_rw_32 count; - io_rw_32 dftx; -} rosc_hw_t; - -#define rosc_hw ((rosc_hw_t *const)ROSC_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/rtc.h b/lib/rp2040/hardware/structs/rtc.h deleted file mode 100644 index 276bd7a2..00000000 --- a/lib/rp2040/hardware/structs/rtc.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_RTC_H -#define _HARDWARE_STRUCTS_RTC_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/rtc.h" - -typedef struct { - io_rw_32 clkdiv_m1; - io_rw_32 setup_0; - io_rw_32 setup_1; - io_rw_32 ctrl; - io_rw_32 irq_setup_0; - io_rw_32 irq_setup_1; - io_rw_32 rtc_1; - io_rw_32 rtc_0; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_rw_32 ints; -} rtc_hw_t; - -#define rtc_hw ((rtc_hw_t *const)RTC_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/scb.h b/lib/rp2040/hardware/structs/scb.h deleted file mode 100644 index b48a8725..00000000 --- a/lib/rp2040/hardware/structs/scb.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _HARDWARE_STRUCTS_SCB_H -#define _HARDWARE_STRUCTS_SCB_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/m0plus.h" - -// SCB == System Control Block -typedef struct { - io_ro_32 cpuid; - io_rw_32 icsr; - io_rw_32 vtor; - io_rw_32 aircr; - io_rw_32 scr; - // ... -} armv6m_scb_t; - -#define scb_hw ((armv6m_scb_t *const)(PPB_BASE + M0PLUS_CPUID_OFFSET)) - -#endif diff --git a/lib/rp2040/hardware/structs/sio.h b/lib/rp2040/hardware/structs/sio.h deleted file mode 100644 index bc277afc..00000000 --- a/lib/rp2040/hardware/structs/sio.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_SIO_H -#define _HARDWARE_STRUCTS_SIO_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/sio.h" -#include "hardware/structs/interp.h" - -typedef struct { - io_ro_32 cpuid; - io_ro_32 gpio_in; - io_ro_32 gpio_hi_in; - uint32_t _pad; - - io_rw_32 gpio_out; - io_wo_32 gpio_set; - io_wo_32 gpio_clr; - io_wo_32 gpio_togl; - - io_wo_32 gpio_oe; - io_wo_32 gpio_oe_set; - io_wo_32 gpio_oe_clr; - io_wo_32 gpio_oe_togl; - - io_rw_32 gpio_hi_out; - io_wo_32 gpio_hi_set; - io_wo_32 gpio_hi_clr; - io_wo_32 gpio_hi_togl; - - io_wo_32 gpio_hi_oe; - io_wo_32 gpio_hi_oe_set; - io_wo_32 gpio_hi_oe_clr; - io_wo_32 gpio_hi_oe_togl; - - io_rw_32 fifo_st; - io_wo_32 fifo_wr; - io_ro_32 fifo_rd; - io_ro_32 spinlock_st; - - io_rw_32 div_udividend; - io_rw_32 div_udivisor; - io_rw_32 div_sdividend; - io_rw_32 div_sdivisor; - - io_rw_32 div_quotient; - io_rw_32 div_remainder; - io_rw_32 div_csr; - - uint32_t _pad2; - - interp_hw_t interp[2]; -} sio_hw_t; - -#define sio_hw ((sio_hw_t *)SIO_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/spi.h b/lib/rp2040/hardware/structs/spi.h deleted file mode 100644 index 5b3b2bab..00000000 --- a/lib/rp2040/hardware/structs/spi.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_SPI_H -#define _HARDWARE_STRUCTS_SPI_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/spi.h" - -typedef struct { - io_rw_32 cr0; - io_rw_32 cr1; - io_rw_32 dr; - io_rw_32 sr; - io_rw_32 cpsr; - io_rw_32 imsc; - io_rw_32 ris; - io_rw_32 mis; - io_rw_32 icr; - io_rw_32 dmacr; -} spi_hw_t; - -#define spi0_hw ((spi_hw_t *const)SPI0_BASE) -#define spi1_hw ((spi_hw_t *const)SPI1_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/ssi.h b/lib/rp2040/hardware/structs/ssi.h deleted file mode 100644 index 80779fe6..00000000 --- a/lib/rp2040/hardware/structs/ssi.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_SSI_H -#define _HARDWARE_STRUCTS_SSI_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/ssi.h" - -typedef struct { - io_rw_32 ctrlr0; - io_rw_32 ctrlr1; - io_rw_32 ssienr; - io_rw_32 mwcr; - io_rw_32 ser; - io_rw_32 baudr; - io_rw_32 txftlr; - io_rw_32 rxftlr; - io_rw_32 txflr; - io_rw_32 rxflr; - io_rw_32 sr; - io_rw_32 imr; - io_rw_32 isr; - io_rw_32 risr; - io_rw_32 txoicr; - io_rw_32 rxoicr; - io_rw_32 rxuicr; - io_rw_32 msticr; - io_rw_32 icr; - io_rw_32 dmacr; - io_rw_32 dmatdlr; - io_rw_32 dmardlr; - io_rw_32 idr; - io_rw_32 ssi_version_id; - io_rw_32 dr0; - uint32_t _pad[(0xf0 - 0x60) / 4 - 1]; - io_rw_32 rx_sample_dly; - io_rw_32 spi_ctrlr0; - io_rw_32 txd_drive_edge; -} ssi_hw_t; - -#define ssi_hw ((ssi_hw_t *const)XIP_SSI_BASE) -#endif diff --git a/lib/rp2040/hardware/structs/syscfg.h b/lib/rp2040/hardware/structs/syscfg.h deleted file mode 100644 index 0bfc7293..00000000 --- a/lib/rp2040/hardware/structs/syscfg.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_SYSCFG_H -#define _HARDWARE_STRUCTS_SYSCFG_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/syscfg.h" - -typedef struct { - io_rw_32 proc0_nmi_mask; - io_rw_32 proc1_nmi_mask; - io_rw_32 proc_config; - io_rw_32 proc_in_sync_bypass; - io_rw_32 proc_in_sync_bypass_hi; - io_rw_32 dbgforce; - io_rw_32 mempowerdown; -} syscfg_hw_t; - -#define syscfg_hw ((syscfg_hw_t *const)SYSCFG_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/systick.h b/lib/rp2040/hardware/structs/systick.h deleted file mode 100644 index 24673fbc..00000000 --- a/lib/rp2040/hardware/structs/systick.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_SYSTICK_H -#define _HARDWARE_STRUCTS_SYSTICK_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/m0plus.h" - -typedef struct { - io_rw_32 csr; - io_rw_32 rvr; - io_rw_32 cvr; - io_ro_32 calib; -} systick_hw_t; - -#define systick_hw ((systick_hw_t *const)(PPB_BASE + M0PLUS_SYST_CSR_OFFSET)) - -#endif diff --git a/lib/rp2040/hardware/structs/timer.h b/lib/rp2040/hardware/structs/timer.h deleted file mode 100644 index e051a069..00000000 --- a/lib/rp2040/hardware/structs/timer.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_TIMER_H -#define _HARDWARE_STRUCTS_TIMER_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/timer.h" - -#define NUM_TIMERS 4 - -typedef struct { - io_wo_32 timehw; - io_wo_32 timelw; - io_ro_32 timehr; - io_ro_32 timelr; - io_rw_32 alarm[NUM_TIMERS]; - io_rw_32 armed; - io_ro_32 timerawh; - io_ro_32 timerawl; - io_rw_32 dbgpause; - io_rw_32 pause; - io_rw_32 intr; - io_rw_32 inte; - io_rw_32 intf; - io_ro_32 ints; -} timer_hw_t; - -#define timer_hw ((timer_hw_t *const)TIMER_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/uart.h b/lib/rp2040/hardware/structs/uart.h deleted file mode 100644 index 42fe8e88..00000000 --- a/lib/rp2040/hardware/structs/uart.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_UART_H -#define _HARDWARE_STRUCTS_UART_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/uart.h" - -typedef struct { - io_rw_32 dr; - io_rw_32 rsr; - uint32_t _pad0[4]; - io_rw_32 fr; - uint32_t _pad1; - io_rw_32 ilpr; - io_rw_32 ibrd; - io_rw_32 fbrd; - io_rw_32 lcr_h; - io_rw_32 cr; - io_rw_32 ifls; - io_rw_32 imsc; - io_rw_32 ris; - io_rw_32 mis; - io_rw_32 icr; - io_rw_32 dmacr; -} uart_hw_t; - -#define uart0_hw ((uart_hw_t *const)UART0_BASE) -#define uart1_hw ((uart_hw_t *const)UART1_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/vreg_and_chip_reset.h b/lib/rp2040/hardware/structs/vreg_and_chip_reset.h deleted file mode 100644 index 9956d683..00000000 --- a/lib/rp2040/hardware/structs/vreg_and_chip_reset.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H -#define _HARDWARE_STRUCTS_VREG_AND_CHIP_RESET_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/vreg_and_chip_reset.h" - -typedef struct { - io_rw_32 vreg; - io_rw_32 bod; - io_rw_32 chip_reset; -} vreg_and_chip_reset_hw_t; - -#define vreg_and_chip_reset_hw ((vreg_and_chip_reset_hw_t *const)VREG_AND_CHIP_RESET_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/watchdog.h b/lib/rp2040/hardware/structs/watchdog.h deleted file mode 100644 index 2cf05f19..00000000 --- a/lib/rp2040/hardware/structs/watchdog.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_WATCHDOG_H -#define _HARDWARE_STRUCTS_WATCHDOG_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/watchdog.h" - -typedef struct { - io_rw_32 ctrl; - io_wo_32 load; - io_ro_32 reason; - io_rw_32 scratch[8]; - io_rw_32 tick; -} watchdog_hw_t; - -#define watchdog_hw ((watchdog_hw_t *const)WATCHDOG_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/xip_ctrl.h b/lib/rp2040/hardware/structs/xip_ctrl.h deleted file mode 100644 index bfa5b1c0..00000000 --- a/lib/rp2040/hardware/structs/xip_ctrl.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ -#ifndef _HARDWARE_STRUCTS_XIP_CTRL_H -#define _HARDWARE_STRUCTS_XIP_CTRL_H - -#include "hardware/address_mapped.h" -#include "hardware/regs/xip.h" - -typedef struct { - io_rw_32 ctrl; - io_rw_32 flush; - io_rw_32 stat; - io_rw_32 ctr_hit; - io_rw_32 ctr_acc; - io_rw_32 stream_addr; - io_rw_32 stream_ctr; - io_rw_32 stream_fifo; -} xip_ctrl_hw_t; - -#define XIP_STAT_FIFO_FULL 0x4u -#define XIP_STAT_FIFO_EMPTY 0x2u -#define XIP_STAT_FLUSH_RDY 0x1u - -#define xip_ctrl_hw ((xip_ctrl_hw_t *const)XIP_CTRL_BASE) - -#endif diff --git a/lib/rp2040/hardware/structs/xosc.h b/lib/rp2040/hardware/structs/xosc.h deleted file mode 100644 index 698e6a2f..00000000 --- a/lib/rp2040/hardware/structs/xosc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2020 Raspberry Pi (Trading) Ltd. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#ifndef _HARDWARE_STRUCTS_XOSC_H -#define _HARDWARE_STRUCTS_XOSC_H - -#include "hardware/address_mapped.h" -#include "hardware/platform_defs.h" -#include "hardware/regs/xosc.h" - -/// \tag::xosc_hw[] -typedef struct { - io_rw_32 ctrl; - io_rw_32 status; - io_rw_32 dormant; - io_rw_32 startup; - io_rw_32 _reserved[3]; - io_rw_32 count; -} xosc_hw_t; - -#define xosc_hw ((xosc_hw_t *const)XOSC_BASE) -/// \end::xosc_hw[] - -#endif diff --git a/lib/rp2040/rp2040.patch b/lib/rp2040/rp2040.patch deleted file mode 100644 index bae9e6d1..00000000 --- a/lib/rp2040/rp2040.patch +++ /dev/null @@ -1,41 +0,0 @@ -diff --git a/lib/rp2040/boot_stage2/boot2_generic_03h.S b/lib/rp2040/boot_stage2/boot2_generic_03h.S -index a10e66abd..cc7e4fbc7 100644 ---- a/lib/rp2040/boot_stage2/boot2_generic_03h.S -+++ b/lib/rp2040/boot_stage2/boot2_generic_03h.S -@@ -16,7 +16,7 @@ - // 4-byte checksum. Therefore code size cannot exceed 252 bytes. - // ---------------------------------------------------------------------------- - --#include "pico/asm_helper.S" -+//#include "pico/asm_helper.S" - #include "hardware/regs/addressmap.h" - #include "hardware/regs/ssi.h" - -diff --git a/lib/rp2040/boot_stage2/boot2_w25q080.S b/lib/rp2040/boot_stage2/boot2_w25q080.S -index ad3238e2..8fb3def4 100644 ---- a/lib/rp2040/boot_stage2/boot2_w25q080.S -+++ b/lib/rp2040/boot_stage2/boot2_w25q080.S -@@ -26,7 +26,7 @@ - // 4-byte checksum. Therefore code size cannot exceed 252 bytes. - // ---------------------------------------------------------------------------- - --#include "pico/asm_helper.S" -+//#include "pico/asm_helper.S" - #include "hardware/regs/addressmap.h" - #include "hardware/regs/ssi.h" - #include "hardware/regs/pads_qspi.h" -diff --git a/lib/rp2040/hardware/address_mapped.h b/lib/rp2040/hardware/address_mapped.h -index b58f1e50..d651f598 100644 ---- a/lib/rp2040/hardware/address_mapped.h -+++ b/lib/rp2040/hardware/address_mapped.h -@@ -7,7 +7,9 @@ - #ifndef _HARDWARE_ADDRESS_MAPPED_H - #define _HARDWARE_ADDRESS_MAPPED_H - --#include "pico.h" -+//#include "pico.h" -+#define __force_inline inline -+#define static_assert(a,b) - #include "hardware/regs/addressmap.h" - - /** \file address_mapped.h diff --git a/lib/rp2040_flash/Makefile b/lib/rp2040_flash/Makefile index d98a72d9..d7e666d4 100644 --- a/lib/rp2040_flash/Makefile +++ b/lib/rp2040_flash/Makefile @@ -4,7 +4,7 @@ LDFALGS= SOURCES=main.c picoboot_connection.c OBJECTS=$(SOURCES:.c=.o) LIBS=`pkg-config libusb-1.0 --libs` -INCLUDE_DIRS+=-I../rp2040/ `pkg-config libusb-1.0 --cflags` +INCLUDE_DIRS+=-I../pico-sdk/ `pkg-config libusb-1.0 --cflags` EXECUTABLE=rp2040_flash diff --git a/src/rp2040/Makefile b/src/rp2040/Makefile index 6d1434be..83c43e72 100644 --- a/src/rp2040/Makefile +++ b/src/rp2040/Makefile @@ -5,8 +5,13 @@ CROSS_PREFIX=arm-none-eabi- dirs-y += src/rp2040 src/generic lib/elf2uf2 lib/fast-hash lib/can2040 +MCU := $(shell echo $(CONFIG_MCU)) +MCU_UPPER := $(shell echo $(CONFIG_MCU) | tr a-z A-Z | tr X x) + CFLAGS += -mcpu=cortex-m0plus -mthumb -Ilib/cmsis-core -CFLAGS += -Ilib/rp2040 -Ilib/rp2040/cmsis_include -Ilib/fast-hash -Ilib/can2040 +CFLAGS += -Ilib/pico-sdk/$(MCU) -Ilib/pico-sdk +CFLAGS += -Ilib/pico-sdk/$(MCU)/cmsis_include -Ilib/fast-hash -Ilib/can2040 +CFLAGS += -DPICO_$(MCU_UPPER) # Add source files src-y += rp2040/main.c rp2040/watchdog.c rp2040/gpio.c @@ -28,18 +33,18 @@ src-$(CONFIG_HAVE_GPIO_I2C) += rp2040/i2c.c # rp2040 stage2 building STAGE2_FILE := $(shell echo $(CONFIG_RP2040_STAGE2_FILE)) -$(OUT)stage2.o: lib/rp2040/boot_stage2/$(STAGE2_FILE) $(OUT)autoconf.h +$(OUT)stage2.o: lib/pico-sdk/$(MCU)/boot_stage2/$(STAGE2_FILE) $(OUT)autoconf.h @echo " Building rp2040 stage2 $@" - $(Q)$(CC) $(CFLAGS) -Ilib/rp2040/boot_stage2 -Ilib/rp2040/boot_stage2/asminclude -DPICO_FLASH_SPI_CLKDIV=$(CONFIG_RP2040_STAGE2_CLKDIV) -c $< -o $(OUT)stage2raw1.o - $(Q)$(LD) $(OUT)stage2raw1.o --script=lib/rp2040/boot_stage2/boot_stage2.ld -o $(OUT)stage2raw.o + $(Q)$(CC) $(CFLAGS) -Ilib/pico-sdk/$(MCU)/boot_stage2 -Ilib/pico-sdk/$(MCU)/boot_stage2/asminclude -DPICO_FLASH_SPI_CLKDIV=$(CONFIG_RP2040_STAGE2_CLKDIV) -c $< -o $(OUT)stage2raw1.o + $(Q)$(LD) $(OUT)stage2raw1.o --script=lib/pico-sdk/$(MCU)/boot_stage2/boot_stage2.ld -o $(OUT)stage2raw.o $(Q)$(OBJCOPY) -O binary $(OUT)stage2raw.o $(OUT)stage2raw.bin - $(Q)lib/rp2040/boot_stage2/pad_checksum -s 0xffffffff $(OUT)stage2raw.bin $(OUT)stage2.S + $(Q)lib/pico-sdk/$(MCU)/boot_stage2/pad_checksum -s 0xffffffff $(OUT)stage2raw.bin $(OUT)stage2.S $(Q)$(CC) $(CFLAGS) -c $(OUT)stage2.S -o $(OUT)stage2.o # Binary output file rules when using stage2 $(OUT)lib/elf2uf2/elf2uf2: lib/elf2uf2/main.cpp @echo " Building $@" - $(Q)g++ -g -O -Ilib/rp2040 $< -o $@ + $(Q)g++ -g -O -Ilib/pico-sdk $< -o $@ $(OUT)klipper.uf2: $(OUT)klipper.elf $(OUT)lib/elf2uf2/elf2uf2 @echo " Creating uf2 file $@" |