diff options
Diffstat (limited to 'lib/pico-sdk/rp2040/hardware/regs/syscfg.h')
| -rw-r--r-- | lib/pico-sdk/rp2040/hardware/regs/syscfg.h | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2040/hardware/regs/syscfg.h b/lib/pico-sdk/rp2040/hardware/regs/syscfg.h new file mode 100644 index 00000000..96672bb4 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/syscfg.h @@ -0,0 +1,252 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : SYSCFG +// Version : 1 +// Bus type : apb +// Description : Register block for various chip control signals +// ============================================================================= +#ifndef _HARDWARE_REGS_SYSCFG_H +#define _HARDWARE_REGS_SYSCFG_H +// ============================================================================= +// Register : SYSCFG_PROC0_NMI_MASK +// Description : Processor core 0 NMI source mask +// Set a bit high to enable NMI from that IRQ +#define SYSCFG_PROC0_NMI_MASK_OFFSET _u(0x00000000) +#define SYSCFG_PROC0_NMI_MASK_BITS _u(0xffffffff) +#define SYSCFG_PROC0_NMI_MASK_RESET _u(0x00000000) +#define SYSCFG_PROC0_NMI_MASK_MSB _u(31) +#define SYSCFG_PROC0_NMI_MASK_LSB _u(0) +#define SYSCFG_PROC0_NMI_MASK_ACCESS "RW" +// ============================================================================= +// Register : SYSCFG_PROC1_NMI_MASK +// Description : Processor core 1 NMI source mask +// Set a bit high to enable NMI from that IRQ +#define SYSCFG_PROC1_NMI_MASK_OFFSET _u(0x00000004) +#define SYSCFG_PROC1_NMI_MASK_BITS _u(0xffffffff) +#define SYSCFG_PROC1_NMI_MASK_RESET _u(0x00000000) +#define SYSCFG_PROC1_NMI_MASK_MSB _u(31) +#define SYSCFG_PROC1_NMI_MASK_LSB _u(0) +#define SYSCFG_PROC1_NMI_MASK_ACCESS "RW" +// ============================================================================= +// Register : SYSCFG_PROC_CONFIG +// Description : Configuration for processors +#define SYSCFG_PROC_CONFIG_OFFSET _u(0x00000008) +#define SYSCFG_PROC_CONFIG_BITS _u(0xff000003) +#define SYSCFG_PROC_CONFIG_RESET _u(0x10000000) +// ----------------------------------------------------------------------------- +// Field : SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID +// Description : Configure proc1 DAP instance ID. +// Recommend that this is NOT changed until you require debug +// access in multi-chip environment +// WARNING: do not set to 15 as this is reserved for RescueDP +#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_RESET _u(0x1) +#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_BITS _u(0xf0000000) +#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_MSB _u(31) +#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_LSB _u(28) +#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID +// Description : Configure proc0 DAP instance ID. +// Recommend that this is NOT changed until you require debug +// access in multi-chip environment +// WARNING: do not set to 15 as this is reserved for RescueDP +#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_RESET _u(0x0) +#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_BITS _u(0x0f000000) +#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_MSB _u(27) +#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_LSB _u(24) +#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_PROC_CONFIG_PROC1_HALTED +// Description : Indication that proc1 has halted +#define SYSCFG_PROC_CONFIG_PROC1_HALTED_RESET _u(0x0) +#define SYSCFG_PROC_CONFIG_PROC1_HALTED_BITS _u(0x00000002) +#define SYSCFG_PROC_CONFIG_PROC1_HALTED_MSB _u(1) +#define SYSCFG_PROC_CONFIG_PROC1_HALTED_LSB _u(1) +#define SYSCFG_PROC_CONFIG_PROC1_HALTED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_PROC_CONFIG_PROC0_HALTED +// Description : Indication that proc0 has halted +#define SYSCFG_PROC_CONFIG_PROC0_HALTED_RESET _u(0x0) +#define SYSCFG_PROC_CONFIG_PROC0_HALTED_BITS _u(0x00000001) +#define SYSCFG_PROC_CONFIG_PROC0_HALTED_MSB _u(0) +#define SYSCFG_PROC_CONFIG_PROC0_HALTED_LSB _u(0) +#define SYSCFG_PROC_CONFIG_PROC0_HALTED_ACCESS "RO" +// ============================================================================= +// Register : SYSCFG_PROC_IN_SYNC_BYPASS +// Description : For each bit, if 1, bypass the input synchronizer between that +// GPIO +// and the GPIO input register in the SIO. The input synchronizers +// should +// generally be unbypassed, to avoid injecting metastabilities +// into processors. +// If you're feeling brave, you can bypass to save two cycles of +// input +// latency. This register applies to GPIO 0...29. +#define SYSCFG_PROC_IN_SYNC_BYPASS_OFFSET _u(0x0000000c) +#define SYSCFG_PROC_IN_SYNC_BYPASS_BITS _u(0x3fffffff) +#define SYSCFG_PROC_IN_SYNC_BYPASS_RESET _u(0x00000000) +#define SYSCFG_PROC_IN_SYNC_BYPASS_MSB _u(29) +#define SYSCFG_PROC_IN_SYNC_BYPASS_LSB _u(0) +#define SYSCFG_PROC_IN_SYNC_BYPASS_ACCESS "RW" +// ============================================================================= +// Register : SYSCFG_PROC_IN_SYNC_BYPASS_HI +// Description : For each bit, if 1, bypass the input synchronizer between that +// GPIO +// and the GPIO input register in the SIO. The input synchronizers +// should +// generally be unbypassed, to avoid injecting metastabilities +// into processors. +// If you're feeling brave, you can bypass to save two cycles of +// input +// latency. This register applies to GPIO 30...35 (the QSPI IOs). +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_OFFSET _u(0x00000010) +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_BITS _u(0x0000003f) +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_RESET _u(0x00000000) +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_MSB _u(5) +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_LSB _u(0) +#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_ACCESS "RW" +// ============================================================================= +// Register : SYSCFG_DBGFORCE +// Description : Directly control the SWD debug port of either processor +#define SYSCFG_DBGFORCE_OFFSET _u(0x00000014) +#define SYSCFG_DBGFORCE_BITS _u(0x000000ff) +#define SYSCFG_DBGFORCE_RESET _u(0x00000066) +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC1_ATTACH +// Description : Attach processor 1 debug port to syscfg controls, and +// disconnect it from external SWD pads. +#define SYSCFG_DBGFORCE_PROC1_ATTACH_RESET _u(0x0) +#define SYSCFG_DBGFORCE_PROC1_ATTACH_BITS _u(0x00000080) +#define SYSCFG_DBGFORCE_PROC1_ATTACH_MSB _u(7) +#define SYSCFG_DBGFORCE_PROC1_ATTACH_LSB _u(7) +#define SYSCFG_DBGFORCE_PROC1_ATTACH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC1_SWCLK +// Description : Directly drive processor 1 SWCLK, if PROC1_ATTACH is set +#define SYSCFG_DBGFORCE_PROC1_SWCLK_RESET _u(0x1) +#define SYSCFG_DBGFORCE_PROC1_SWCLK_BITS _u(0x00000040) +#define SYSCFG_DBGFORCE_PROC1_SWCLK_MSB _u(6) +#define SYSCFG_DBGFORCE_PROC1_SWCLK_LSB _u(6) +#define SYSCFG_DBGFORCE_PROC1_SWCLK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC1_SWDI +// Description : Directly drive processor 1 SWDIO input, if PROC1_ATTACH is set +#define SYSCFG_DBGFORCE_PROC1_SWDI_RESET _u(0x1) +#define SYSCFG_DBGFORCE_PROC1_SWDI_BITS _u(0x00000020) +#define SYSCFG_DBGFORCE_PROC1_SWDI_MSB _u(5) +#define SYSCFG_DBGFORCE_PROC1_SWDI_LSB _u(5) +#define SYSCFG_DBGFORCE_PROC1_SWDI_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC1_SWDO +// Description : Observe the value of processor 1 SWDIO output. +#define SYSCFG_DBGFORCE_PROC1_SWDO_RESET "-" +#define SYSCFG_DBGFORCE_PROC1_SWDO_BITS _u(0x00000010) +#define SYSCFG_DBGFORCE_PROC1_SWDO_MSB _u(4) +#define SYSCFG_DBGFORCE_PROC1_SWDO_LSB _u(4) +#define SYSCFG_DBGFORCE_PROC1_SWDO_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC0_ATTACH +// Description : Attach processor 0 debug port to syscfg controls, and +// disconnect it from external SWD pads. +#define SYSCFG_DBGFORCE_PROC0_ATTACH_RESET _u(0x0) +#define SYSCFG_DBGFORCE_PROC0_ATTACH_BITS _u(0x00000008) +#define SYSCFG_DBGFORCE_PROC0_ATTACH_MSB _u(3) +#define SYSCFG_DBGFORCE_PROC0_ATTACH_LSB _u(3) +#define SYSCFG_DBGFORCE_PROC0_ATTACH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC0_SWCLK +// Description : Directly drive processor 0 SWCLK, if PROC0_ATTACH is set +#define SYSCFG_DBGFORCE_PROC0_SWCLK_RESET _u(0x1) +#define SYSCFG_DBGFORCE_PROC0_SWCLK_BITS _u(0x00000004) +#define SYSCFG_DBGFORCE_PROC0_SWCLK_MSB _u(2) +#define SYSCFG_DBGFORCE_PROC0_SWCLK_LSB _u(2) +#define SYSCFG_DBGFORCE_PROC0_SWCLK_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC0_SWDI +// Description : Directly drive processor 0 SWDIO input, if PROC0_ATTACH is set +#define SYSCFG_DBGFORCE_PROC0_SWDI_RESET _u(0x1) +#define SYSCFG_DBGFORCE_PROC0_SWDI_BITS _u(0x00000002) +#define SYSCFG_DBGFORCE_PROC0_SWDI_MSB _u(1) +#define SYSCFG_DBGFORCE_PROC0_SWDI_LSB _u(1) +#define SYSCFG_DBGFORCE_PROC0_SWDI_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_DBGFORCE_PROC0_SWDO +// Description : Observe the value of processor 0 SWDIO output. +#define SYSCFG_DBGFORCE_PROC0_SWDO_RESET "-" +#define SYSCFG_DBGFORCE_PROC0_SWDO_BITS _u(0x00000001) +#define SYSCFG_DBGFORCE_PROC0_SWDO_MSB _u(0) +#define SYSCFG_DBGFORCE_PROC0_SWDO_LSB _u(0) +#define SYSCFG_DBGFORCE_PROC0_SWDO_ACCESS "RO" +// ============================================================================= +// Register : SYSCFG_MEMPOWERDOWN +// Description : Control power downs to memories. Set high to power down +// memories. +// Use with extreme caution +#define SYSCFG_MEMPOWERDOWN_OFFSET _u(0x00000018) +#define SYSCFG_MEMPOWERDOWN_BITS _u(0x000000ff) +#define SYSCFG_MEMPOWERDOWN_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_ROM +#define SYSCFG_MEMPOWERDOWN_ROM_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_ROM_BITS _u(0x00000080) +#define SYSCFG_MEMPOWERDOWN_ROM_MSB _u(7) +#define SYSCFG_MEMPOWERDOWN_ROM_LSB _u(7) +#define SYSCFG_MEMPOWERDOWN_ROM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_USB +#define SYSCFG_MEMPOWERDOWN_USB_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_USB_BITS _u(0x00000040) +#define SYSCFG_MEMPOWERDOWN_USB_MSB _u(6) +#define SYSCFG_MEMPOWERDOWN_USB_LSB _u(6) +#define SYSCFG_MEMPOWERDOWN_USB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM5 +#define SYSCFG_MEMPOWERDOWN_SRAM5_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM5_BITS _u(0x00000020) +#define SYSCFG_MEMPOWERDOWN_SRAM5_MSB _u(5) +#define SYSCFG_MEMPOWERDOWN_SRAM5_LSB _u(5) +#define SYSCFG_MEMPOWERDOWN_SRAM5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM4 +#define SYSCFG_MEMPOWERDOWN_SRAM4_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM4_BITS _u(0x00000010) +#define SYSCFG_MEMPOWERDOWN_SRAM4_MSB _u(4) +#define SYSCFG_MEMPOWERDOWN_SRAM4_LSB _u(4) +#define SYSCFG_MEMPOWERDOWN_SRAM4_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM3 +#define SYSCFG_MEMPOWERDOWN_SRAM3_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM3_BITS _u(0x00000008) +#define SYSCFG_MEMPOWERDOWN_SRAM3_MSB _u(3) +#define SYSCFG_MEMPOWERDOWN_SRAM3_LSB _u(3) +#define SYSCFG_MEMPOWERDOWN_SRAM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM2 +#define SYSCFG_MEMPOWERDOWN_SRAM2_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM2_BITS _u(0x00000004) +#define SYSCFG_MEMPOWERDOWN_SRAM2_MSB _u(2) +#define SYSCFG_MEMPOWERDOWN_SRAM2_LSB _u(2) +#define SYSCFG_MEMPOWERDOWN_SRAM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM1 +#define SYSCFG_MEMPOWERDOWN_SRAM1_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM1_BITS _u(0x00000002) +#define SYSCFG_MEMPOWERDOWN_SRAM1_MSB _u(1) +#define SYSCFG_MEMPOWERDOWN_SRAM1_LSB _u(1) +#define SYSCFG_MEMPOWERDOWN_SRAM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SYSCFG_MEMPOWERDOWN_SRAM0 +#define SYSCFG_MEMPOWERDOWN_SRAM0_RESET _u(0x0) +#define SYSCFG_MEMPOWERDOWN_SRAM0_BITS _u(0x00000001) +#define SYSCFG_MEMPOWERDOWN_SRAM0_MSB _u(0) +#define SYSCFG_MEMPOWERDOWN_SRAM0_LSB _u(0) +#define SYSCFG_MEMPOWERDOWN_SRAM0_ACCESS "RW" +// ============================================================================= +#endif // _HARDWARE_REGS_SYSCFG_H + |