diff options
Diffstat (limited to 'lib/pico-sdk/rp2040/hardware/structs/m0plus.h')
| -rw-r--r-- | lib/pico-sdk/rp2040/hardware/structs/m0plus.h | 197 |
1 files changed, 197 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2040/hardware/structs/m0plus.h b/lib/pico-sdk/rp2040/hardware/structs/m0plus.h new file mode 100644 index 00000000..6d30edec --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/structs/m0plus.h @@ -0,0 +1,197 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef _HARDWARE_STRUCTS_M0PLUS_H +#define _HARDWARE_STRUCTS_M0PLUS_H + +/** + * \file rp2040/m0plus.h + */ + +#include "hardware/address_mapped.h" +#include "hardware/regs/m0plus.h" + +// Reference to datasheet: https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#tab-registerlist_m0plus +// +// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) +// _REG_(x) will link to the corresponding register in hardware/regs/m0plus.h. +// +// Bit-field descriptions are of the form: +// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION + +typedef struct { + uint32_t _pad0[14340]; + + _REG_(M0PLUS_SYST_CSR_OFFSET) // M0PLUS_SYST_CSR + // SysTick Control and Status Register + // 0x00010000 [16] COUNTFLAG (0) Returns 1 if timer counted to 0 since last time this was read + // 0x00000004 [2] CLKSOURCE (0) SysTick clock source + // 0x00000002 [1] TICKINT (0) Enables SysTick exception request: + + // 0x00000001 [0] ENABLE (0) Enable SysTick counter: + + io_rw_32 syst_csr; + + _REG_(M0PLUS_SYST_RVR_OFFSET) // M0PLUS_SYST_RVR + // SysTick Reload Value Register + // 0x00ffffff [23:0] RELOAD (0x000000) Value to load into the SysTick Current Value Register... + io_rw_32 syst_rvr; + + _REG_(M0PLUS_SYST_CVR_OFFSET) // M0PLUS_SYST_CVR + // SysTick Current Value Register + // 0x00ffffff [23:0] CURRENT (0x000000) Reads return the current value of the SysTick counter + io_rw_32 syst_cvr; + + _REG_(M0PLUS_SYST_CALIB_OFFSET) // M0PLUS_SYST_CALIB + // SysTick Calibration Value Register + // 0x80000000 [31] NOREF (0) If reads as 1, the Reference clock is not provided - the... + // 0x40000000 [30] SKEW (0) If reads as 1, the calibration value for 10ms is inexact... + // 0x00ffffff [23:0] TENMS (0x000000) An optional Reload value to be used for 10ms (100Hz)... + io_ro_32 syst_calib; + + uint32_t _pad1[56]; + + _REG_(M0PLUS_NVIC_ISER_OFFSET) // M0PLUS_NVIC_ISER + // Interrupt Set-Enable Register + // 0xffffffff [31:0] SETENA (0x00000000) Interrupt set-enable bits + io_rw_32 nvic_iser; + + uint32_t _pad2[31]; + + _REG_(M0PLUS_NVIC_ICER_OFFSET) // M0PLUS_NVIC_ICER + // Interrupt Clear-Enable Register + // 0xffffffff [31:0] CLRENA (0x00000000) Interrupt clear-enable bits + io_rw_32 nvic_icer; + + uint32_t _pad3[31]; + + _REG_(M0PLUS_NVIC_ISPR_OFFSET) // M0PLUS_NVIC_ISPR + // Interrupt Set-Pending Register + // 0xffffffff [31:0] SETPEND (0x00000000) Interrupt set-pending bits + io_rw_32 nvic_ispr; + + uint32_t _pad4[31]; + + _REG_(M0PLUS_NVIC_ICPR_OFFSET) // M0PLUS_NVIC_ICPR + // Interrupt Clear-Pending Register + // 0xffffffff [31:0] CLRPEND (0x00000000) Interrupt clear-pending bits + io_rw_32 nvic_icpr; + + uint32_t _pad5[95]; + + // (Description copied from array index 0 register M0PLUS_NVIC_IPR0 applies similarly to other array indexes) + _REG_(M0PLUS_NVIC_IPR0_OFFSET) // M0PLUS_NVIC_IPR0 + // Interrupt Priority Register 0 + // 0xc0000000 [31:30] IP_3 (0x0) Priority of interrupt 3 + // 0x00c00000 [23:22] IP_2 (0x0) Priority of interrupt 2 + // 0x0000c000 [15:14] IP_1 (0x0) Priority of interrupt 1 + // 0x000000c0 [7:6] IP_0 (0x0) Priority of interrupt 0 + io_rw_32 nvic_ipr[8]; + + uint32_t _pad6[568]; + + _REG_(M0PLUS_CPUID_OFFSET) // M0PLUS_CPUID + // CPUID Base Register + // 0xff000000 [31:24] IMPLEMENTER (0x41) Implementor code: 0x41 = ARM + // 0x00f00000 [23:20] VARIANT (0x0) Major revision number n in the rnpm revision status: + + // 0x000f0000 [19:16] ARCHITECTURE (0xc) Constant that defines the architecture of the processor: + + // 0x0000fff0 [15:4] PARTNO (0xc60) Number of processor within family: 0xC60 = Cortex-M0+ + // 0x0000000f [3:0] REVISION (0x1) Minor revision number m in the rnpm revision status: + + io_ro_32 cpuid; + + _REG_(M0PLUS_ICSR_OFFSET) // M0PLUS_ICSR + // Interrupt Control and State Register + // 0x80000000 [31] NMIPENDSET (0) Setting this bit will activate an NMI + // 0x10000000 [28] PENDSVSET (0) PendSV set-pending bit + // 0x08000000 [27] PENDSVCLR (0) PendSV clear-pending bit + // 0x04000000 [26] PENDSTSET (0) SysTick exception set-pending bit + // 0x02000000 [25] PENDSTCLR (0) SysTick exception clear-pending bit + // 0x00800000 [23] ISRPREEMPT (0) The system can only access this bit when the core is halted + // 0x00400000 [22] ISRPENDING (0) External interrupt pending flag + // 0x001ff000 [20:12] VECTPENDING (0x000) Indicates the exception number for the highest priority... + // 0x000001ff [8:0] VECTACTIVE (0x000) Active exception number field + io_rw_32 icsr; + + _REG_(M0PLUS_VTOR_OFFSET) // M0PLUS_VTOR + // Vector Table Offset Register + // 0xffffff00 [31:8] TBLOFF (0x000000) Bits [31:8] of the indicate the vector table offset address + io_rw_32 vtor; + + _REG_(M0PLUS_AIRCR_OFFSET) // M0PLUS_AIRCR + // Application Interrupt and Reset Control Register + // 0xffff0000 [31:16] VECTKEY (0x0000) Register key: + + // 0x00008000 [15] ENDIANESS (0) Data endianness implemented: + + // 0x00000004 [2] SYSRESETREQ (0) Writing 1 to this bit causes the SYSRESETREQ signal to... + // 0x00000002 [1] VECTCLRACTIVE (0) Clears all active state information for fixed and... + io_rw_32 aircr; + + _REG_(M0PLUS_SCR_OFFSET) // M0PLUS_SCR + // System Control Register + // 0x00000010 [4] SEVONPEND (0) Send Event on Pending bit: + + // 0x00000004 [2] SLEEPDEEP (0) Controls whether the processor uses sleep or deep sleep... + // 0x00000002 [1] SLEEPONEXIT (0) Indicates sleep-on-exit when returning from Handler mode... + io_rw_32 scr; + + _REG_(M0PLUS_CCR_OFFSET) // M0PLUS_CCR + // Configuration and Control Register + // 0x00000200 [9] STKALIGN (0) Always reads as one, indicates 8-byte stack alignment on... + // 0x00000008 [3] UNALIGN_TRP (0) Always reads as one, indicates that all unaligned... + io_ro_32 ccr; + + uint32_t _pad7; + + // (Description copied from array index 0 register M0PLUS_SHPR2 applies similarly to other array indexes) + _REG_(M0PLUS_SHPR2_OFFSET) // M0PLUS_SHPR2 + // System Handler Priority Register 2 + // 0xc0000000 [31:30] PRI_11 (0x0) Priority of system handler 11, SVCall + io_rw_32 shpr[2]; + + _REG_(M0PLUS_SHCSR_OFFSET) // M0PLUS_SHCSR + // System Handler Control and State Register + // 0x00008000 [15] SVCALLPENDED (0) Reads as 1 if SVCall is Pending + io_rw_32 shcsr; + + uint32_t _pad8[26]; + + _REG_(M0PLUS_MPU_TYPE_OFFSET) // M0PLUS_MPU_TYPE + // MPU Type Register + // 0x00ff0000 [23:16] IREGION (0x00) Instruction region + // 0x0000ff00 [15:8] DREGION (0x08) Number of regions supported by the MPU + // 0x00000001 [0] SEPARATE (0) Indicates support for separate instruction and data address maps + io_ro_32 mpu_type; + + _REG_(M0PLUS_MPU_CTRL_OFFSET) // M0PLUS_MPU_CTRL + // MPU Control Register + // 0x00000004 [2] PRIVDEFENA (0) Controls whether the default memory map is enabled as a... + // 0x00000002 [1] HFNMIENA (0) Controls the use of the MPU for HardFaults and NMIs + // 0x00000001 [0] ENABLE (0) Enables the MPU + io_rw_32 mpu_ctrl; + + _REG_(M0PLUS_MPU_RNR_OFFSET) // M0PLUS_MPU_RNR + // MPU Region Number Register + // 0x0000000f [3:0] REGION (0x0) Indicates the MPU region referenced by the MPU_RBAR and... + io_rw_32 mpu_rnr; + + _REG_(M0PLUS_MPU_RBAR_OFFSET) // M0PLUS_MPU_RBAR + // MPU Region Base Address Register + // 0xffffff00 [31:8] ADDR (0x000000) Base address of the region + // 0x00000010 [4] VALID (0) On writes, indicates whether the write must update the... + // 0x0000000f [3:0] REGION (0x0) On writes, specifies the number of the region whose base... + io_rw_32 mpu_rbar; + + _REG_(M0PLUS_MPU_RASR_OFFSET) // M0PLUS_MPU_RASR + // MPU Region Attribute and Size Register + // 0xffff0000 [31:16] ATTRS (0x0000) The MPU Region Attribute field + // 0x0000ff00 [15:8] SRD (0x00) Subregion Disable + // 0x0000003e [5:1] SIZE (0x00) Indicates the region size + // 0x00000001 [0] ENABLE (0) Enables the region + io_rw_32 mpu_rasr; +} m0plus_hw_t; + +#define ppb_hw ((m0plus_hw_t *)PPB_BASE) +static_assert(sizeof (m0plus_hw_t) == 0xeda4, ""); + +#endif // _HARDWARE_STRUCTS_M0PLUS_H + |