diff options
Diffstat (limited to 'lib/pico-sdk/rp2040/hardware/regs/pwm.h')
| -rw-r--r-- | lib/pico-sdk/rp2040/hardware/regs/pwm.h | 1420 |
1 files changed, 1420 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2040/hardware/regs/pwm.h b/lib/pico-sdk/rp2040/hardware/regs/pwm.h new file mode 100644 index 00000000..29a24f8d --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/pwm.h @@ -0,0 +1,1420 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : PWM +// Version : 1 +// Bus type : apb +// Description : Simple PWM +// ============================================================================= +#ifndef _HARDWARE_REGS_PWM_H +#define _HARDWARE_REGS_PWM_H +// ============================================================================= +// Register : PWM_CH0_CSR +// Description : Control and status register +#define PWM_CH0_CSR_OFFSET _u(0x00000000) +#define PWM_CH0_CSR_BITS _u(0x000000ff) +#define PWM_CH0_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH0_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH0_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH0_CSR_PH_ADV_MSB _u(7) +#define PWM_CH0_CSR_PH_ADV_LSB _u(7) +#define PWM_CH0_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH0_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH0_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH0_CSR_PH_RET_MSB _u(6) +#define PWM_CH0_CSR_PH_RET_LSB _u(6) +#define PWM_CH0_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH0_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH0_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH0_CSR_DIVMODE_MSB _u(5) +#define PWM_CH0_CSR_DIVMODE_LSB _u(4) +#define PWM_CH0_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH0_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH0_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH0_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH0_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_B_INV +// Description : Invert output B +#define PWM_CH0_CSR_B_INV_RESET _u(0x0) +#define PWM_CH0_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH0_CSR_B_INV_MSB _u(3) +#define PWM_CH0_CSR_B_INV_LSB _u(3) +#define PWM_CH0_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_A_INV +// Description : Invert output A +#define PWM_CH0_CSR_A_INV_RESET _u(0x0) +#define PWM_CH0_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH0_CSR_A_INV_MSB _u(2) +#define PWM_CH0_CSR_A_INV_LSB _u(2) +#define PWM_CH0_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH0_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH0_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH0_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH0_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH0_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH0_CSR_EN_RESET _u(0x0) +#define PWM_CH0_CSR_EN_BITS _u(0x00000001) +#define PWM_CH0_CSR_EN_MSB _u(0) +#define PWM_CH0_CSR_EN_LSB _u(0) +#define PWM_CH0_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH0_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH0_DIV_OFFSET _u(0x00000004) +#define PWM_CH0_DIV_BITS _u(0x00000fff) +#define PWM_CH0_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_DIV_INT +#define PWM_CH0_DIV_INT_RESET _u(0x01) +#define PWM_CH0_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH0_DIV_INT_MSB _u(11) +#define PWM_CH0_DIV_INT_LSB _u(4) +#define PWM_CH0_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_DIV_FRAC +#define PWM_CH0_DIV_FRAC_RESET _u(0x0) +#define PWM_CH0_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH0_DIV_FRAC_MSB _u(3) +#define PWM_CH0_DIV_FRAC_LSB _u(0) +#define PWM_CH0_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH0_CTR +// Description : Direct access to the PWM counter +#define PWM_CH0_CTR_OFFSET _u(0x00000008) +#define PWM_CH0_CTR_BITS _u(0x0000ffff) +#define PWM_CH0_CTR_RESET _u(0x00000000) +#define PWM_CH0_CTR_MSB _u(15) +#define PWM_CH0_CTR_LSB _u(0) +#define PWM_CH0_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH0_CC +// Description : Counter compare values +#define PWM_CH0_CC_OFFSET _u(0x0000000c) +#define PWM_CH0_CC_BITS _u(0xffffffff) +#define PWM_CH0_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CC_B +#define PWM_CH0_CC_B_RESET _u(0x0000) +#define PWM_CH0_CC_B_BITS _u(0xffff0000) +#define PWM_CH0_CC_B_MSB _u(31) +#define PWM_CH0_CC_B_LSB _u(16) +#define PWM_CH0_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH0_CC_A +#define PWM_CH0_CC_A_RESET _u(0x0000) +#define PWM_CH0_CC_A_BITS _u(0x0000ffff) +#define PWM_CH0_CC_A_MSB _u(15) +#define PWM_CH0_CC_A_LSB _u(0) +#define PWM_CH0_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH0_TOP +// Description : Counter wrap value +#define PWM_CH0_TOP_OFFSET _u(0x00000010) +#define PWM_CH0_TOP_BITS _u(0x0000ffff) +#define PWM_CH0_TOP_RESET _u(0x0000ffff) +#define PWM_CH0_TOP_MSB _u(15) +#define PWM_CH0_TOP_LSB _u(0) +#define PWM_CH0_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH1_CSR +// Description : Control and status register +#define PWM_CH1_CSR_OFFSET _u(0x00000014) +#define PWM_CH1_CSR_BITS _u(0x000000ff) +#define PWM_CH1_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH1_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH1_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH1_CSR_PH_ADV_MSB _u(7) +#define PWM_CH1_CSR_PH_ADV_LSB _u(7) +#define PWM_CH1_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH1_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH1_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH1_CSR_PH_RET_MSB _u(6) +#define PWM_CH1_CSR_PH_RET_LSB _u(6) +#define PWM_CH1_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH1_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH1_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH1_CSR_DIVMODE_MSB _u(5) +#define PWM_CH1_CSR_DIVMODE_LSB _u(4) +#define PWM_CH1_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH1_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH1_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH1_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH1_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_B_INV +// Description : Invert output B +#define PWM_CH1_CSR_B_INV_RESET _u(0x0) +#define PWM_CH1_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH1_CSR_B_INV_MSB _u(3) +#define PWM_CH1_CSR_B_INV_LSB _u(3) +#define PWM_CH1_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_A_INV +// Description : Invert output A +#define PWM_CH1_CSR_A_INV_RESET _u(0x0) +#define PWM_CH1_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH1_CSR_A_INV_MSB _u(2) +#define PWM_CH1_CSR_A_INV_LSB _u(2) +#define PWM_CH1_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH1_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH1_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH1_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH1_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH1_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH1_CSR_EN_RESET _u(0x0) +#define PWM_CH1_CSR_EN_BITS _u(0x00000001) +#define PWM_CH1_CSR_EN_MSB _u(0) +#define PWM_CH1_CSR_EN_LSB _u(0) +#define PWM_CH1_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH1_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH1_DIV_OFFSET _u(0x00000018) +#define PWM_CH1_DIV_BITS _u(0x00000fff) +#define PWM_CH1_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_DIV_INT +#define PWM_CH1_DIV_INT_RESET _u(0x01) +#define PWM_CH1_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH1_DIV_INT_MSB _u(11) +#define PWM_CH1_DIV_INT_LSB _u(4) +#define PWM_CH1_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_DIV_FRAC +#define PWM_CH1_DIV_FRAC_RESET _u(0x0) +#define PWM_CH1_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH1_DIV_FRAC_MSB _u(3) +#define PWM_CH1_DIV_FRAC_LSB _u(0) +#define PWM_CH1_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH1_CTR +// Description : Direct access to the PWM counter +#define PWM_CH1_CTR_OFFSET _u(0x0000001c) +#define PWM_CH1_CTR_BITS _u(0x0000ffff) +#define PWM_CH1_CTR_RESET _u(0x00000000) +#define PWM_CH1_CTR_MSB _u(15) +#define PWM_CH1_CTR_LSB _u(0) +#define PWM_CH1_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH1_CC +// Description : Counter compare values +#define PWM_CH1_CC_OFFSET _u(0x00000020) +#define PWM_CH1_CC_BITS _u(0xffffffff) +#define PWM_CH1_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CC_B +#define PWM_CH1_CC_B_RESET _u(0x0000) +#define PWM_CH1_CC_B_BITS _u(0xffff0000) +#define PWM_CH1_CC_B_MSB _u(31) +#define PWM_CH1_CC_B_LSB _u(16) +#define PWM_CH1_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH1_CC_A +#define PWM_CH1_CC_A_RESET _u(0x0000) +#define PWM_CH1_CC_A_BITS _u(0x0000ffff) +#define PWM_CH1_CC_A_MSB _u(15) +#define PWM_CH1_CC_A_LSB _u(0) +#define PWM_CH1_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH1_TOP +// Description : Counter wrap value +#define PWM_CH1_TOP_OFFSET _u(0x00000024) +#define PWM_CH1_TOP_BITS _u(0x0000ffff) +#define PWM_CH1_TOP_RESET _u(0x0000ffff) +#define PWM_CH1_TOP_MSB _u(15) +#define PWM_CH1_TOP_LSB _u(0) +#define PWM_CH1_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH2_CSR +// Description : Control and status register +#define PWM_CH2_CSR_OFFSET _u(0x00000028) +#define PWM_CH2_CSR_BITS _u(0x000000ff) +#define PWM_CH2_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH2_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH2_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH2_CSR_PH_ADV_MSB _u(7) +#define PWM_CH2_CSR_PH_ADV_LSB _u(7) +#define PWM_CH2_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH2_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH2_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH2_CSR_PH_RET_MSB _u(6) +#define PWM_CH2_CSR_PH_RET_LSB _u(6) +#define PWM_CH2_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH2_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH2_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH2_CSR_DIVMODE_MSB _u(5) +#define PWM_CH2_CSR_DIVMODE_LSB _u(4) +#define PWM_CH2_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH2_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH2_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH2_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH2_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_B_INV +// Description : Invert output B +#define PWM_CH2_CSR_B_INV_RESET _u(0x0) +#define PWM_CH2_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH2_CSR_B_INV_MSB _u(3) +#define PWM_CH2_CSR_B_INV_LSB _u(3) +#define PWM_CH2_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_A_INV +// Description : Invert output A +#define PWM_CH2_CSR_A_INV_RESET _u(0x0) +#define PWM_CH2_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH2_CSR_A_INV_MSB _u(2) +#define PWM_CH2_CSR_A_INV_LSB _u(2) +#define PWM_CH2_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH2_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH2_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH2_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH2_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH2_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH2_CSR_EN_RESET _u(0x0) +#define PWM_CH2_CSR_EN_BITS _u(0x00000001) +#define PWM_CH2_CSR_EN_MSB _u(0) +#define PWM_CH2_CSR_EN_LSB _u(0) +#define PWM_CH2_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH2_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH2_DIV_OFFSET _u(0x0000002c) +#define PWM_CH2_DIV_BITS _u(0x00000fff) +#define PWM_CH2_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_DIV_INT +#define PWM_CH2_DIV_INT_RESET _u(0x01) +#define PWM_CH2_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH2_DIV_INT_MSB _u(11) +#define PWM_CH2_DIV_INT_LSB _u(4) +#define PWM_CH2_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_DIV_FRAC +#define PWM_CH2_DIV_FRAC_RESET _u(0x0) +#define PWM_CH2_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH2_DIV_FRAC_MSB _u(3) +#define PWM_CH2_DIV_FRAC_LSB _u(0) +#define PWM_CH2_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH2_CTR +// Description : Direct access to the PWM counter +#define PWM_CH2_CTR_OFFSET _u(0x00000030) +#define PWM_CH2_CTR_BITS _u(0x0000ffff) +#define PWM_CH2_CTR_RESET _u(0x00000000) +#define PWM_CH2_CTR_MSB _u(15) +#define PWM_CH2_CTR_LSB _u(0) +#define PWM_CH2_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH2_CC +// Description : Counter compare values +#define PWM_CH2_CC_OFFSET _u(0x00000034) +#define PWM_CH2_CC_BITS _u(0xffffffff) +#define PWM_CH2_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CC_B +#define PWM_CH2_CC_B_RESET _u(0x0000) +#define PWM_CH2_CC_B_BITS _u(0xffff0000) +#define PWM_CH2_CC_B_MSB _u(31) +#define PWM_CH2_CC_B_LSB _u(16) +#define PWM_CH2_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH2_CC_A +#define PWM_CH2_CC_A_RESET _u(0x0000) +#define PWM_CH2_CC_A_BITS _u(0x0000ffff) +#define PWM_CH2_CC_A_MSB _u(15) +#define PWM_CH2_CC_A_LSB _u(0) +#define PWM_CH2_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH2_TOP +// Description : Counter wrap value +#define PWM_CH2_TOP_OFFSET _u(0x00000038) +#define PWM_CH2_TOP_BITS _u(0x0000ffff) +#define PWM_CH2_TOP_RESET _u(0x0000ffff) +#define PWM_CH2_TOP_MSB _u(15) +#define PWM_CH2_TOP_LSB _u(0) +#define PWM_CH2_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH3_CSR +// Description : Control and status register +#define PWM_CH3_CSR_OFFSET _u(0x0000003c) +#define PWM_CH3_CSR_BITS _u(0x000000ff) +#define PWM_CH3_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH3_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH3_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH3_CSR_PH_ADV_MSB _u(7) +#define PWM_CH3_CSR_PH_ADV_LSB _u(7) +#define PWM_CH3_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH3_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH3_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH3_CSR_PH_RET_MSB _u(6) +#define PWM_CH3_CSR_PH_RET_LSB _u(6) +#define PWM_CH3_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH3_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH3_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH3_CSR_DIVMODE_MSB _u(5) +#define PWM_CH3_CSR_DIVMODE_LSB _u(4) +#define PWM_CH3_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH3_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH3_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH3_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH3_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_B_INV +// Description : Invert output B +#define PWM_CH3_CSR_B_INV_RESET _u(0x0) +#define PWM_CH3_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH3_CSR_B_INV_MSB _u(3) +#define PWM_CH3_CSR_B_INV_LSB _u(3) +#define PWM_CH3_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_A_INV +// Description : Invert output A +#define PWM_CH3_CSR_A_INV_RESET _u(0x0) +#define PWM_CH3_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH3_CSR_A_INV_MSB _u(2) +#define PWM_CH3_CSR_A_INV_LSB _u(2) +#define PWM_CH3_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH3_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH3_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH3_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH3_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH3_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH3_CSR_EN_RESET _u(0x0) +#define PWM_CH3_CSR_EN_BITS _u(0x00000001) +#define PWM_CH3_CSR_EN_MSB _u(0) +#define PWM_CH3_CSR_EN_LSB _u(0) +#define PWM_CH3_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH3_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH3_DIV_OFFSET _u(0x00000040) +#define PWM_CH3_DIV_BITS _u(0x00000fff) +#define PWM_CH3_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_DIV_INT +#define PWM_CH3_DIV_INT_RESET _u(0x01) +#define PWM_CH3_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH3_DIV_INT_MSB _u(11) +#define PWM_CH3_DIV_INT_LSB _u(4) +#define PWM_CH3_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_DIV_FRAC +#define PWM_CH3_DIV_FRAC_RESET _u(0x0) +#define PWM_CH3_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH3_DIV_FRAC_MSB _u(3) +#define PWM_CH3_DIV_FRAC_LSB _u(0) +#define PWM_CH3_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH3_CTR +// Description : Direct access to the PWM counter +#define PWM_CH3_CTR_OFFSET _u(0x00000044) +#define PWM_CH3_CTR_BITS _u(0x0000ffff) +#define PWM_CH3_CTR_RESET _u(0x00000000) +#define PWM_CH3_CTR_MSB _u(15) +#define PWM_CH3_CTR_LSB _u(0) +#define PWM_CH3_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH3_CC +// Description : Counter compare values +#define PWM_CH3_CC_OFFSET _u(0x00000048) +#define PWM_CH3_CC_BITS _u(0xffffffff) +#define PWM_CH3_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CC_B +#define PWM_CH3_CC_B_RESET _u(0x0000) +#define PWM_CH3_CC_B_BITS _u(0xffff0000) +#define PWM_CH3_CC_B_MSB _u(31) +#define PWM_CH3_CC_B_LSB _u(16) +#define PWM_CH3_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH3_CC_A +#define PWM_CH3_CC_A_RESET _u(0x0000) +#define PWM_CH3_CC_A_BITS _u(0x0000ffff) +#define PWM_CH3_CC_A_MSB _u(15) +#define PWM_CH3_CC_A_LSB _u(0) +#define PWM_CH3_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH3_TOP +// Description : Counter wrap value +#define PWM_CH3_TOP_OFFSET _u(0x0000004c) +#define PWM_CH3_TOP_BITS _u(0x0000ffff) +#define PWM_CH3_TOP_RESET _u(0x0000ffff) +#define PWM_CH3_TOP_MSB _u(15) +#define PWM_CH3_TOP_LSB _u(0) +#define PWM_CH3_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH4_CSR +// Description : Control and status register +#define PWM_CH4_CSR_OFFSET _u(0x00000050) +#define PWM_CH4_CSR_BITS _u(0x000000ff) +#define PWM_CH4_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH4_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH4_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH4_CSR_PH_ADV_MSB _u(7) +#define PWM_CH4_CSR_PH_ADV_LSB _u(7) +#define PWM_CH4_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH4_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH4_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH4_CSR_PH_RET_MSB _u(6) +#define PWM_CH4_CSR_PH_RET_LSB _u(6) +#define PWM_CH4_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH4_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH4_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH4_CSR_DIVMODE_MSB _u(5) +#define PWM_CH4_CSR_DIVMODE_LSB _u(4) +#define PWM_CH4_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH4_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH4_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH4_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH4_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_B_INV +// Description : Invert output B +#define PWM_CH4_CSR_B_INV_RESET _u(0x0) +#define PWM_CH4_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH4_CSR_B_INV_MSB _u(3) +#define PWM_CH4_CSR_B_INV_LSB _u(3) +#define PWM_CH4_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_A_INV +// Description : Invert output A +#define PWM_CH4_CSR_A_INV_RESET _u(0x0) +#define PWM_CH4_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH4_CSR_A_INV_MSB _u(2) +#define PWM_CH4_CSR_A_INV_LSB _u(2) +#define PWM_CH4_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH4_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH4_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH4_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH4_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH4_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH4_CSR_EN_RESET _u(0x0) +#define PWM_CH4_CSR_EN_BITS _u(0x00000001) +#define PWM_CH4_CSR_EN_MSB _u(0) +#define PWM_CH4_CSR_EN_LSB _u(0) +#define PWM_CH4_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH4_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH4_DIV_OFFSET _u(0x00000054) +#define PWM_CH4_DIV_BITS _u(0x00000fff) +#define PWM_CH4_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_DIV_INT +#define PWM_CH4_DIV_INT_RESET _u(0x01) +#define PWM_CH4_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH4_DIV_INT_MSB _u(11) +#define PWM_CH4_DIV_INT_LSB _u(4) +#define PWM_CH4_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_DIV_FRAC +#define PWM_CH4_DIV_FRAC_RESET _u(0x0) +#define PWM_CH4_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH4_DIV_FRAC_MSB _u(3) +#define PWM_CH4_DIV_FRAC_LSB _u(0) +#define PWM_CH4_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH4_CTR +// Description : Direct access to the PWM counter +#define PWM_CH4_CTR_OFFSET _u(0x00000058) +#define PWM_CH4_CTR_BITS _u(0x0000ffff) +#define PWM_CH4_CTR_RESET _u(0x00000000) +#define PWM_CH4_CTR_MSB _u(15) +#define PWM_CH4_CTR_LSB _u(0) +#define PWM_CH4_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH4_CC +// Description : Counter compare values +#define PWM_CH4_CC_OFFSET _u(0x0000005c) +#define PWM_CH4_CC_BITS _u(0xffffffff) +#define PWM_CH4_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CC_B +#define PWM_CH4_CC_B_RESET _u(0x0000) +#define PWM_CH4_CC_B_BITS _u(0xffff0000) +#define PWM_CH4_CC_B_MSB _u(31) +#define PWM_CH4_CC_B_LSB _u(16) +#define PWM_CH4_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH4_CC_A +#define PWM_CH4_CC_A_RESET _u(0x0000) +#define PWM_CH4_CC_A_BITS _u(0x0000ffff) +#define PWM_CH4_CC_A_MSB _u(15) +#define PWM_CH4_CC_A_LSB _u(0) +#define PWM_CH4_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH4_TOP +// Description : Counter wrap value +#define PWM_CH4_TOP_OFFSET _u(0x00000060) +#define PWM_CH4_TOP_BITS _u(0x0000ffff) +#define PWM_CH4_TOP_RESET _u(0x0000ffff) +#define PWM_CH4_TOP_MSB _u(15) +#define PWM_CH4_TOP_LSB _u(0) +#define PWM_CH4_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH5_CSR +// Description : Control and status register +#define PWM_CH5_CSR_OFFSET _u(0x00000064) +#define PWM_CH5_CSR_BITS _u(0x000000ff) +#define PWM_CH5_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH5_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH5_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH5_CSR_PH_ADV_MSB _u(7) +#define PWM_CH5_CSR_PH_ADV_LSB _u(7) +#define PWM_CH5_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH5_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH5_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH5_CSR_PH_RET_MSB _u(6) +#define PWM_CH5_CSR_PH_RET_LSB _u(6) +#define PWM_CH5_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH5_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH5_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH5_CSR_DIVMODE_MSB _u(5) +#define PWM_CH5_CSR_DIVMODE_LSB _u(4) +#define PWM_CH5_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH5_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH5_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH5_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH5_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_B_INV +// Description : Invert output B +#define PWM_CH5_CSR_B_INV_RESET _u(0x0) +#define PWM_CH5_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH5_CSR_B_INV_MSB _u(3) +#define PWM_CH5_CSR_B_INV_LSB _u(3) +#define PWM_CH5_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_A_INV +// Description : Invert output A +#define PWM_CH5_CSR_A_INV_RESET _u(0x0) +#define PWM_CH5_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH5_CSR_A_INV_MSB _u(2) +#define PWM_CH5_CSR_A_INV_LSB _u(2) +#define PWM_CH5_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH5_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH5_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH5_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH5_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH5_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH5_CSR_EN_RESET _u(0x0) +#define PWM_CH5_CSR_EN_BITS _u(0x00000001) +#define PWM_CH5_CSR_EN_MSB _u(0) +#define PWM_CH5_CSR_EN_LSB _u(0) +#define PWM_CH5_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH5_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH5_DIV_OFFSET _u(0x00000068) +#define PWM_CH5_DIV_BITS _u(0x00000fff) +#define PWM_CH5_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_DIV_INT +#define PWM_CH5_DIV_INT_RESET _u(0x01) +#define PWM_CH5_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH5_DIV_INT_MSB _u(11) +#define PWM_CH5_DIV_INT_LSB _u(4) +#define PWM_CH5_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_DIV_FRAC +#define PWM_CH5_DIV_FRAC_RESET _u(0x0) +#define PWM_CH5_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH5_DIV_FRAC_MSB _u(3) +#define PWM_CH5_DIV_FRAC_LSB _u(0) +#define PWM_CH5_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH5_CTR +// Description : Direct access to the PWM counter +#define PWM_CH5_CTR_OFFSET _u(0x0000006c) +#define PWM_CH5_CTR_BITS _u(0x0000ffff) +#define PWM_CH5_CTR_RESET _u(0x00000000) +#define PWM_CH5_CTR_MSB _u(15) +#define PWM_CH5_CTR_LSB _u(0) +#define PWM_CH5_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH5_CC +// Description : Counter compare values +#define PWM_CH5_CC_OFFSET _u(0x00000070) +#define PWM_CH5_CC_BITS _u(0xffffffff) +#define PWM_CH5_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CC_B +#define PWM_CH5_CC_B_RESET _u(0x0000) +#define PWM_CH5_CC_B_BITS _u(0xffff0000) +#define PWM_CH5_CC_B_MSB _u(31) +#define PWM_CH5_CC_B_LSB _u(16) +#define PWM_CH5_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH5_CC_A +#define PWM_CH5_CC_A_RESET _u(0x0000) +#define PWM_CH5_CC_A_BITS _u(0x0000ffff) +#define PWM_CH5_CC_A_MSB _u(15) +#define PWM_CH5_CC_A_LSB _u(0) +#define PWM_CH5_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH5_TOP +// Description : Counter wrap value +#define PWM_CH5_TOP_OFFSET _u(0x00000074) +#define PWM_CH5_TOP_BITS _u(0x0000ffff) +#define PWM_CH5_TOP_RESET _u(0x0000ffff) +#define PWM_CH5_TOP_MSB _u(15) +#define PWM_CH5_TOP_LSB _u(0) +#define PWM_CH5_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH6_CSR +// Description : Control and status register +#define PWM_CH6_CSR_OFFSET _u(0x00000078) +#define PWM_CH6_CSR_BITS _u(0x000000ff) +#define PWM_CH6_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH6_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH6_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH6_CSR_PH_ADV_MSB _u(7) +#define PWM_CH6_CSR_PH_ADV_LSB _u(7) +#define PWM_CH6_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH6_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH6_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH6_CSR_PH_RET_MSB _u(6) +#define PWM_CH6_CSR_PH_RET_LSB _u(6) +#define PWM_CH6_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH6_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH6_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH6_CSR_DIVMODE_MSB _u(5) +#define PWM_CH6_CSR_DIVMODE_LSB _u(4) +#define PWM_CH6_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH6_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH6_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH6_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH6_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_B_INV +// Description : Invert output B +#define PWM_CH6_CSR_B_INV_RESET _u(0x0) +#define PWM_CH6_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH6_CSR_B_INV_MSB _u(3) +#define PWM_CH6_CSR_B_INV_LSB _u(3) +#define PWM_CH6_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_A_INV +// Description : Invert output A +#define PWM_CH6_CSR_A_INV_RESET _u(0x0) +#define PWM_CH6_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH6_CSR_A_INV_MSB _u(2) +#define PWM_CH6_CSR_A_INV_LSB _u(2) +#define PWM_CH6_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH6_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH6_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH6_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH6_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH6_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH6_CSR_EN_RESET _u(0x0) +#define PWM_CH6_CSR_EN_BITS _u(0x00000001) +#define PWM_CH6_CSR_EN_MSB _u(0) +#define PWM_CH6_CSR_EN_LSB _u(0) +#define PWM_CH6_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH6_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH6_DIV_OFFSET _u(0x0000007c) +#define PWM_CH6_DIV_BITS _u(0x00000fff) +#define PWM_CH6_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_DIV_INT +#define PWM_CH6_DIV_INT_RESET _u(0x01) +#define PWM_CH6_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH6_DIV_INT_MSB _u(11) +#define PWM_CH6_DIV_INT_LSB _u(4) +#define PWM_CH6_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_DIV_FRAC +#define PWM_CH6_DIV_FRAC_RESET _u(0x0) +#define PWM_CH6_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH6_DIV_FRAC_MSB _u(3) +#define PWM_CH6_DIV_FRAC_LSB _u(0) +#define PWM_CH6_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH6_CTR +// Description : Direct access to the PWM counter +#define PWM_CH6_CTR_OFFSET _u(0x00000080) +#define PWM_CH6_CTR_BITS _u(0x0000ffff) +#define PWM_CH6_CTR_RESET _u(0x00000000) +#define PWM_CH6_CTR_MSB _u(15) +#define PWM_CH6_CTR_LSB _u(0) +#define PWM_CH6_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH6_CC +// Description : Counter compare values +#define PWM_CH6_CC_OFFSET _u(0x00000084) +#define PWM_CH6_CC_BITS _u(0xffffffff) +#define PWM_CH6_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CC_B +#define PWM_CH6_CC_B_RESET _u(0x0000) +#define PWM_CH6_CC_B_BITS _u(0xffff0000) +#define PWM_CH6_CC_B_MSB _u(31) +#define PWM_CH6_CC_B_LSB _u(16) +#define PWM_CH6_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH6_CC_A +#define PWM_CH6_CC_A_RESET _u(0x0000) +#define PWM_CH6_CC_A_BITS _u(0x0000ffff) +#define PWM_CH6_CC_A_MSB _u(15) +#define PWM_CH6_CC_A_LSB _u(0) +#define PWM_CH6_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH6_TOP +// Description : Counter wrap value +#define PWM_CH6_TOP_OFFSET _u(0x00000088) +#define PWM_CH6_TOP_BITS _u(0x0000ffff) +#define PWM_CH6_TOP_RESET _u(0x0000ffff) +#define PWM_CH6_TOP_MSB _u(15) +#define PWM_CH6_TOP_LSB _u(0) +#define PWM_CH6_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH7_CSR +// Description : Control and status register +#define PWM_CH7_CSR_OFFSET _u(0x0000008c) +#define PWM_CH7_CSR_BITS _u(0x000000ff) +#define PWM_CH7_CSR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_PH_ADV +// Description : Advance the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running +// at less than full speed (div_int + div_frac / 16 > 1) +#define PWM_CH7_CSR_PH_ADV_RESET _u(0x0) +#define PWM_CH7_CSR_PH_ADV_BITS _u(0x00000080) +#define PWM_CH7_CSR_PH_ADV_MSB _u(7) +#define PWM_CH7_CSR_PH_ADV_LSB _u(7) +#define PWM_CH7_CSR_PH_ADV_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_PH_RET +// Description : Retard the phase of the counter by 1 count, while it is +// running. +// Self-clearing. Write a 1, and poll until low. Counter must be +// running. +#define PWM_CH7_CSR_PH_RET_RESET _u(0x0) +#define PWM_CH7_CSR_PH_RET_BITS _u(0x00000040) +#define PWM_CH7_CSR_PH_RET_MSB _u(6) +#define PWM_CH7_CSR_PH_RET_LSB _u(6) +#define PWM_CH7_CSR_PH_RET_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_DIVMODE +// 0x0 -> Free-running counting at rate dictated by fractional divider +// 0x1 -> Fractional divider operation is gated by the PWM B pin. +// 0x2 -> Counter advances with each rising edge of the PWM B pin. +// 0x3 -> Counter advances with each falling edge of the PWM B pin. +#define PWM_CH7_CSR_DIVMODE_RESET _u(0x0) +#define PWM_CH7_CSR_DIVMODE_BITS _u(0x00000030) +#define PWM_CH7_CSR_DIVMODE_MSB _u(5) +#define PWM_CH7_CSR_DIVMODE_LSB _u(4) +#define PWM_CH7_CSR_DIVMODE_ACCESS "RW" +#define PWM_CH7_CSR_DIVMODE_VALUE_DIV _u(0x0) +#define PWM_CH7_CSR_DIVMODE_VALUE_LEVEL _u(0x1) +#define PWM_CH7_CSR_DIVMODE_VALUE_RISE _u(0x2) +#define PWM_CH7_CSR_DIVMODE_VALUE_FALL _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_B_INV +// Description : Invert output B +#define PWM_CH7_CSR_B_INV_RESET _u(0x0) +#define PWM_CH7_CSR_B_INV_BITS _u(0x00000008) +#define PWM_CH7_CSR_B_INV_MSB _u(3) +#define PWM_CH7_CSR_B_INV_LSB _u(3) +#define PWM_CH7_CSR_B_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_A_INV +// Description : Invert output A +#define PWM_CH7_CSR_A_INV_RESET _u(0x0) +#define PWM_CH7_CSR_A_INV_BITS _u(0x00000004) +#define PWM_CH7_CSR_A_INV_MSB _u(2) +#define PWM_CH7_CSR_A_INV_LSB _u(2) +#define PWM_CH7_CSR_A_INV_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_PH_CORRECT +// Description : 1: Enable phase-correct modulation. 0: Trailing-edge +#define PWM_CH7_CSR_PH_CORRECT_RESET _u(0x0) +#define PWM_CH7_CSR_PH_CORRECT_BITS _u(0x00000002) +#define PWM_CH7_CSR_PH_CORRECT_MSB _u(1) +#define PWM_CH7_CSR_PH_CORRECT_LSB _u(1) +#define PWM_CH7_CSR_PH_CORRECT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CSR_EN +// Description : Enable the PWM channel. +#define PWM_CH7_CSR_EN_RESET _u(0x0) +#define PWM_CH7_CSR_EN_BITS _u(0x00000001) +#define PWM_CH7_CSR_EN_MSB _u(0) +#define PWM_CH7_CSR_EN_LSB _u(0) +#define PWM_CH7_CSR_EN_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH7_DIV +// Description : INT and FRAC form a fixed-point fractional number. +// Counting rate is system clock frequency divided by this number. +// Fractional division uses simple 1st-order sigma-delta. +#define PWM_CH7_DIV_OFFSET _u(0x00000090) +#define PWM_CH7_DIV_BITS _u(0x00000fff) +#define PWM_CH7_DIV_RESET _u(0x00000010) +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_DIV_INT +#define PWM_CH7_DIV_INT_RESET _u(0x01) +#define PWM_CH7_DIV_INT_BITS _u(0x00000ff0) +#define PWM_CH7_DIV_INT_MSB _u(11) +#define PWM_CH7_DIV_INT_LSB _u(4) +#define PWM_CH7_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_DIV_FRAC +#define PWM_CH7_DIV_FRAC_RESET _u(0x0) +#define PWM_CH7_DIV_FRAC_BITS _u(0x0000000f) +#define PWM_CH7_DIV_FRAC_MSB _u(3) +#define PWM_CH7_DIV_FRAC_LSB _u(0) +#define PWM_CH7_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH7_CTR +// Description : Direct access to the PWM counter +#define PWM_CH7_CTR_OFFSET _u(0x00000094) +#define PWM_CH7_CTR_BITS _u(0x0000ffff) +#define PWM_CH7_CTR_RESET _u(0x00000000) +#define PWM_CH7_CTR_MSB _u(15) +#define PWM_CH7_CTR_LSB _u(0) +#define PWM_CH7_CTR_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH7_CC +// Description : Counter compare values +#define PWM_CH7_CC_OFFSET _u(0x00000098) +#define PWM_CH7_CC_BITS _u(0xffffffff) +#define PWM_CH7_CC_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CC_B +#define PWM_CH7_CC_B_RESET _u(0x0000) +#define PWM_CH7_CC_B_BITS _u(0xffff0000) +#define PWM_CH7_CC_B_MSB _u(31) +#define PWM_CH7_CC_B_LSB _u(16) +#define PWM_CH7_CC_B_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_CH7_CC_A +#define PWM_CH7_CC_A_RESET _u(0x0000) +#define PWM_CH7_CC_A_BITS _u(0x0000ffff) +#define PWM_CH7_CC_A_MSB _u(15) +#define PWM_CH7_CC_A_LSB _u(0) +#define PWM_CH7_CC_A_ACCESS "RW" +// ============================================================================= +// Register : PWM_CH7_TOP +// Description : Counter wrap value +#define PWM_CH7_TOP_OFFSET _u(0x0000009c) +#define PWM_CH7_TOP_BITS _u(0x0000ffff) +#define PWM_CH7_TOP_RESET _u(0x0000ffff) +#define PWM_CH7_TOP_MSB _u(15) +#define PWM_CH7_TOP_LSB _u(0) +#define PWM_CH7_TOP_ACCESS "RW" +// ============================================================================= +// Register : PWM_EN +// Description : This register aliases the CSR_EN bits for all channels. +// Writing to this register allows multiple channels to be enabled +// or disabled simultaneously, so they can run in perfect sync. +// For each channel, there is only one physical EN register bit, +// which can be accessed through here or CHx_CSR. +#define PWM_EN_OFFSET _u(0x000000a0) +#define PWM_EN_BITS _u(0x000000ff) +#define PWM_EN_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH7 +#define PWM_EN_CH7_RESET _u(0x0) +#define PWM_EN_CH7_BITS _u(0x00000080) +#define PWM_EN_CH7_MSB _u(7) +#define PWM_EN_CH7_LSB _u(7) +#define PWM_EN_CH7_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH6 +#define PWM_EN_CH6_RESET _u(0x0) +#define PWM_EN_CH6_BITS _u(0x00000040) +#define PWM_EN_CH6_MSB _u(6) +#define PWM_EN_CH6_LSB _u(6) +#define PWM_EN_CH6_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH5 +#define PWM_EN_CH5_RESET _u(0x0) +#define PWM_EN_CH5_BITS _u(0x00000020) +#define PWM_EN_CH5_MSB _u(5) +#define PWM_EN_CH5_LSB _u(5) +#define PWM_EN_CH5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH4 +#define PWM_EN_CH4_RESET _u(0x0) +#define PWM_EN_CH4_BITS _u(0x00000010) +#define PWM_EN_CH4_MSB _u(4) +#define PWM_EN_CH4_LSB _u(4) +#define PWM_EN_CH4_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH3 +#define PWM_EN_CH3_RESET _u(0x0) +#define PWM_EN_CH3_BITS _u(0x00000008) +#define PWM_EN_CH3_MSB _u(3) +#define PWM_EN_CH3_LSB _u(3) +#define PWM_EN_CH3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH2 +#define PWM_EN_CH2_RESET _u(0x0) +#define PWM_EN_CH2_BITS _u(0x00000004) +#define PWM_EN_CH2_MSB _u(2) +#define PWM_EN_CH2_LSB _u(2) +#define PWM_EN_CH2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH1 +#define PWM_EN_CH1_RESET _u(0x0) +#define PWM_EN_CH1_BITS _u(0x00000002) +#define PWM_EN_CH1_MSB _u(1) +#define PWM_EN_CH1_LSB _u(1) +#define PWM_EN_CH1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_EN_CH0 +#define PWM_EN_CH0_RESET _u(0x0) +#define PWM_EN_CH0_BITS _u(0x00000001) +#define PWM_EN_CH0_MSB _u(0) +#define PWM_EN_CH0_LSB _u(0) +#define PWM_EN_CH0_ACCESS "RW" +// ============================================================================= +// Register : PWM_INTR +// Description : Raw Interrupts +#define PWM_INTR_OFFSET _u(0x000000a4) +#define PWM_INTR_BITS _u(0x000000ff) +#define PWM_INTR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH7 +#define PWM_INTR_CH7_RESET _u(0x0) +#define PWM_INTR_CH7_BITS _u(0x00000080) +#define PWM_INTR_CH7_MSB _u(7) +#define PWM_INTR_CH7_LSB _u(7) +#define PWM_INTR_CH7_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH6 +#define PWM_INTR_CH6_RESET _u(0x0) +#define PWM_INTR_CH6_BITS _u(0x00000040) +#define PWM_INTR_CH6_MSB _u(6) +#define PWM_INTR_CH6_LSB _u(6) +#define PWM_INTR_CH6_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH5 +#define PWM_INTR_CH5_RESET _u(0x0) +#define PWM_INTR_CH5_BITS _u(0x00000020) +#define PWM_INTR_CH5_MSB _u(5) +#define PWM_INTR_CH5_LSB _u(5) +#define PWM_INTR_CH5_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH4 +#define PWM_INTR_CH4_RESET _u(0x0) +#define PWM_INTR_CH4_BITS _u(0x00000010) +#define PWM_INTR_CH4_MSB _u(4) +#define PWM_INTR_CH4_LSB _u(4) +#define PWM_INTR_CH4_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH3 +#define PWM_INTR_CH3_RESET _u(0x0) +#define PWM_INTR_CH3_BITS _u(0x00000008) +#define PWM_INTR_CH3_MSB _u(3) +#define PWM_INTR_CH3_LSB _u(3) +#define PWM_INTR_CH3_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH2 +#define PWM_INTR_CH2_RESET _u(0x0) +#define PWM_INTR_CH2_BITS _u(0x00000004) +#define PWM_INTR_CH2_MSB _u(2) +#define PWM_INTR_CH2_LSB _u(2) +#define PWM_INTR_CH2_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH1 +#define PWM_INTR_CH1_RESET _u(0x0) +#define PWM_INTR_CH1_BITS _u(0x00000002) +#define PWM_INTR_CH1_MSB _u(1) +#define PWM_INTR_CH1_LSB _u(1) +#define PWM_INTR_CH1_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PWM_INTR_CH0 +#define PWM_INTR_CH0_RESET _u(0x0) +#define PWM_INTR_CH0_BITS _u(0x00000001) +#define PWM_INTR_CH0_MSB _u(0) +#define PWM_INTR_CH0_LSB _u(0) +#define PWM_INTR_CH0_ACCESS "WC" +// ============================================================================= +// Register : PWM_INTE +// Description : Interrupt Enable +#define PWM_INTE_OFFSET _u(0x000000a8) +#define PWM_INTE_BITS _u(0x000000ff) +#define PWM_INTE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH7 +#define PWM_INTE_CH7_RESET _u(0x0) +#define PWM_INTE_CH7_BITS _u(0x00000080) +#define PWM_INTE_CH7_MSB _u(7) +#define PWM_INTE_CH7_LSB _u(7) +#define PWM_INTE_CH7_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH6 +#define PWM_INTE_CH6_RESET _u(0x0) +#define PWM_INTE_CH6_BITS _u(0x00000040) +#define PWM_INTE_CH6_MSB _u(6) +#define PWM_INTE_CH6_LSB _u(6) +#define PWM_INTE_CH6_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH5 +#define PWM_INTE_CH5_RESET _u(0x0) +#define PWM_INTE_CH5_BITS _u(0x00000020) +#define PWM_INTE_CH5_MSB _u(5) +#define PWM_INTE_CH5_LSB _u(5) +#define PWM_INTE_CH5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH4 +#define PWM_INTE_CH4_RESET _u(0x0) +#define PWM_INTE_CH4_BITS _u(0x00000010) +#define PWM_INTE_CH4_MSB _u(4) +#define PWM_INTE_CH4_LSB _u(4) +#define PWM_INTE_CH4_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH3 +#define PWM_INTE_CH3_RESET _u(0x0) +#define PWM_INTE_CH3_BITS _u(0x00000008) +#define PWM_INTE_CH3_MSB _u(3) +#define PWM_INTE_CH3_LSB _u(3) +#define PWM_INTE_CH3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH2 +#define PWM_INTE_CH2_RESET _u(0x0) +#define PWM_INTE_CH2_BITS _u(0x00000004) +#define PWM_INTE_CH2_MSB _u(2) +#define PWM_INTE_CH2_LSB _u(2) +#define PWM_INTE_CH2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH1 +#define PWM_INTE_CH1_RESET _u(0x0) +#define PWM_INTE_CH1_BITS _u(0x00000002) +#define PWM_INTE_CH1_MSB _u(1) +#define PWM_INTE_CH1_LSB _u(1) +#define PWM_INTE_CH1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTE_CH0 +#define PWM_INTE_CH0_RESET _u(0x0) +#define PWM_INTE_CH0_BITS _u(0x00000001) +#define PWM_INTE_CH0_MSB _u(0) +#define PWM_INTE_CH0_LSB _u(0) +#define PWM_INTE_CH0_ACCESS "RW" +// ============================================================================= +// Register : PWM_INTF +// Description : Interrupt Force +#define PWM_INTF_OFFSET _u(0x000000ac) +#define PWM_INTF_BITS _u(0x000000ff) +#define PWM_INTF_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH7 +#define PWM_INTF_CH7_RESET _u(0x0) +#define PWM_INTF_CH7_BITS _u(0x00000080) +#define PWM_INTF_CH7_MSB _u(7) +#define PWM_INTF_CH7_LSB _u(7) +#define PWM_INTF_CH7_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH6 +#define PWM_INTF_CH6_RESET _u(0x0) +#define PWM_INTF_CH6_BITS _u(0x00000040) +#define PWM_INTF_CH6_MSB _u(6) +#define PWM_INTF_CH6_LSB _u(6) +#define PWM_INTF_CH6_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH5 +#define PWM_INTF_CH5_RESET _u(0x0) +#define PWM_INTF_CH5_BITS _u(0x00000020) +#define PWM_INTF_CH5_MSB _u(5) +#define PWM_INTF_CH5_LSB _u(5) +#define PWM_INTF_CH5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH4 +#define PWM_INTF_CH4_RESET _u(0x0) +#define PWM_INTF_CH4_BITS _u(0x00000010) +#define PWM_INTF_CH4_MSB _u(4) +#define PWM_INTF_CH4_LSB _u(4) +#define PWM_INTF_CH4_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH3 +#define PWM_INTF_CH3_RESET _u(0x0) +#define PWM_INTF_CH3_BITS _u(0x00000008) +#define PWM_INTF_CH3_MSB _u(3) +#define PWM_INTF_CH3_LSB _u(3) +#define PWM_INTF_CH3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH2 +#define PWM_INTF_CH2_RESET _u(0x0) +#define PWM_INTF_CH2_BITS _u(0x00000004) +#define PWM_INTF_CH2_MSB _u(2) +#define PWM_INTF_CH2_LSB _u(2) +#define PWM_INTF_CH2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH1 +#define PWM_INTF_CH1_RESET _u(0x0) +#define PWM_INTF_CH1_BITS _u(0x00000002) +#define PWM_INTF_CH1_MSB _u(1) +#define PWM_INTF_CH1_LSB _u(1) +#define PWM_INTF_CH1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PWM_INTF_CH0 +#define PWM_INTF_CH0_RESET _u(0x0) +#define PWM_INTF_CH0_BITS _u(0x00000001) +#define PWM_INTF_CH0_MSB _u(0) +#define PWM_INTF_CH0_LSB _u(0) +#define PWM_INTF_CH0_ACCESS "RW" +// ============================================================================= +// Register : PWM_INTS +// Description : Interrupt status after masking & forcing +#define PWM_INTS_OFFSET _u(0x000000b0) +#define PWM_INTS_BITS _u(0x000000ff) +#define PWM_INTS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH7 +#define PWM_INTS_CH7_RESET _u(0x0) +#define PWM_INTS_CH7_BITS _u(0x00000080) +#define PWM_INTS_CH7_MSB _u(7) +#define PWM_INTS_CH7_LSB _u(7) +#define PWM_INTS_CH7_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH6 +#define PWM_INTS_CH6_RESET _u(0x0) +#define PWM_INTS_CH6_BITS _u(0x00000040) +#define PWM_INTS_CH6_MSB _u(6) +#define PWM_INTS_CH6_LSB _u(6) +#define PWM_INTS_CH6_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH5 +#define PWM_INTS_CH5_RESET _u(0x0) +#define PWM_INTS_CH5_BITS _u(0x00000020) +#define PWM_INTS_CH5_MSB _u(5) +#define PWM_INTS_CH5_LSB _u(5) +#define PWM_INTS_CH5_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH4 +#define PWM_INTS_CH4_RESET _u(0x0) +#define PWM_INTS_CH4_BITS _u(0x00000010) +#define PWM_INTS_CH4_MSB _u(4) +#define PWM_INTS_CH4_LSB _u(4) +#define PWM_INTS_CH4_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH3 +#define PWM_INTS_CH3_RESET _u(0x0) +#define PWM_INTS_CH3_BITS _u(0x00000008) +#define PWM_INTS_CH3_MSB _u(3) +#define PWM_INTS_CH3_LSB _u(3) +#define PWM_INTS_CH3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH2 +#define PWM_INTS_CH2_RESET _u(0x0) +#define PWM_INTS_CH2_BITS _u(0x00000004) +#define PWM_INTS_CH2_MSB _u(2) +#define PWM_INTS_CH2_LSB _u(2) +#define PWM_INTS_CH2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH1 +#define PWM_INTS_CH1_RESET _u(0x0) +#define PWM_INTS_CH1_BITS _u(0x00000002) +#define PWM_INTS_CH1_MSB _u(1) +#define PWM_INTS_CH1_LSB _u(1) +#define PWM_INTS_CH1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PWM_INTS_CH0 +#define PWM_INTS_CH0_RESET _u(0x0) +#define PWM_INTS_CH0_BITS _u(0x00000001) +#define PWM_INTS_CH0_MSB _u(0) +#define PWM_INTS_CH0_LSB _u(0) +#define PWM_INTS_CH0_ACCESS "RO" +// ============================================================================= +#endif // _HARDWARE_REGS_PWM_H + |