1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
/**
* Copyright (c) 2024 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _HARDWARE_STRUCTS_USB_DPRAM_H
#define _HARDWARE_STRUCTS_USB_DPRAM_H
#include "hardware/address_mapped.h"
#include "hardware/regs/usb.h"
// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_usb
//
// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
// _REG_(x) will link to the corresponding register in hardware/regs/usb.h.
//
// Bit-field descriptions are of the form:
// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
// 0-15
#define USB_NUM_ENDPOINTS 16
// allow user to restrict number of endpoints available to save RAN
#ifndef USB_MAX_ENDPOINTS
#define USB_MAX_ENDPOINTS USB_NUM_ENDPOINTS
#endif
// 1-15
#define USB_HOST_INTERRUPT_ENDPOINTS (USB_NUM_ENDPOINTS - 1)
// Endpoint buffer control bits
#define USB_BUF_CTRL_FULL 0x00008000u
#define USB_BUF_CTRL_LAST 0x00004000u
#define USB_BUF_CTRL_DATA0_PID 0x00000000u
#define USB_BUF_CTRL_DATA1_PID 0x00002000u
#define USB_BUF_CTRL_SEL 0x00001000u
#define USB_BUF_CTRL_STALL 0x00000800u
#define USB_BUF_CTRL_AVAIL 0x00000400u
#define USB_BUF_CTRL_LEN_MASK 0x000003FFu
#define USB_BUF_CTRL_LEN_LSB 0
// ep_inout_ctrl bits
#define EP_CTRL_ENABLE_BITS (1u << 31u)
#define EP_CTRL_DOUBLE_BUFFERED_BITS (1u << 30)
#define EP_CTRL_INTERRUPT_PER_BUFFER (1u << 29)
#define EP_CTRL_INTERRUPT_PER_DOUBLE_BUFFER (1u << 28)
#define EP_CTRL_INTERRUPT_ON_NAK (1u << 16)
#define EP_CTRL_INTERRUPT_ON_STALL (1u << 17)
#define EP_CTRL_BUFFER_TYPE_LSB 26u
#define EP_CTRL_HOST_INTERRUPT_INTERVAL_LSB 16u
#define USB_DPRAM_SIZE 4096u
// PICO_CONFIG: USB_DPRAM_MAX, Set amount of USB RAM used by USB system, min=0, max=4096, default=4096, group=hardware_usb
// Allow user to claim some of the USB RAM for themselves
#ifndef USB_DPRAM_MAX
#define USB_DPRAM_MAX USB_DPRAM_SIZE
#endif
// Define maximum packet sizes
#define USB_MAX_ISO_PACKET_SIZE 1023
#define USB_MAX_PACKET_SIZE 64
typedef struct {
// 4K of DPSRAM at beginning. Note this supports 8, 16, and 32 bit accesses
volatile uint8_t setup_packet[8]; // First 8 bytes are always for setup packets
// Starts at ep1
struct usb_device_dpram_ep_ctrl {
io_rw_32 in;
io_rw_32 out;
} ep_ctrl[USB_NUM_ENDPOINTS - 1];
// Starts at ep0
struct usb_device_dpram_ep_buf_ctrl {
io_rw_32 in;
io_rw_32 out;
} ep_buf_ctrl[USB_NUM_ENDPOINTS];
// EP0 buffers are fixed. Assumes single buffered mode for EP0
uint8_t ep0_buf_a[0x40];
uint8_t ep0_buf_b[0x40];
// Rest of DPRAM can be carved up as needed
uint8_t epx_data[USB_DPRAM_MAX - 0x180];
} usb_device_dpram_t;
static_assert(sizeof(usb_device_dpram_t) == USB_DPRAM_MAX, "");
static_assert(offsetof(usb_device_dpram_t, epx_data) == 0x180, "");
typedef struct {
// 4K of DPSRAM at beginning. Note this supports 8, 16, and 32 bit accesses
volatile uint8_t setup_packet[8]; // First 8 bytes are always for setup packets
// Interrupt endpoint control 1 -> 15
struct usb_host_dpram_ep_ctrl {
io_rw_32 ctrl;
io_rw_32 spare;
} int_ep_ctrl[USB_HOST_INTERRUPT_ENDPOINTS];
io_rw_32 epx_buf_ctrl;
io_rw_32 _spare0;
// Interrupt endpoint buffer control
struct usb_host_dpram_ep_buf_ctrl {
io_rw_32 ctrl;
io_rw_32 spare;
} int_ep_buffer_ctrl[USB_HOST_INTERRUPT_ENDPOINTS];
io_rw_32 epx_ctrl;
uint8_t _spare1[124];
// Should start at 0x180
uint8_t epx_data[USB_DPRAM_MAX - 0x180];
} usb_host_dpram_t;
static_assert(sizeof(usb_host_dpram_t) == USB_DPRAM_MAX, "");
static_assert(offsetof(usb_host_dpram_t, epx_data) == 0x180, "");
#define usb_dpram ((usb_device_dpram_t *)USBCTRL_DPRAM_BASE)
#define usbh_dpram ((usb_host_dpram_t *)USBCTRL_DPRAM_BASE)
static_assert( USB_HOST_INTERRUPT_ENDPOINTS == 15, "");
#endif // _HARDWARE_STRUCTS_USB_DPRAM_H
|
