diff options
Diffstat (limited to 'lib/pico-sdk/rp2040/hardware/regs/clocks.h')
| -rw-r--r-- | lib/pico-sdk/rp2040/hardware/regs/clocks.h | 2262 |
1 files changed, 2262 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2040/hardware/regs/clocks.h b/lib/pico-sdk/rp2040/hardware/regs/clocks.h new file mode 100644 index 00000000..7c604b9b --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/clocks.h @@ -0,0 +1,2262 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : CLOCKS +// Version : 1 +// Bus type : apb +// ============================================================================= +#ifndef _HARDWARE_REGS_CLOCKS_H +#define _HARDWARE_REGS_CLOCKS_H +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT0_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_GPOUT0_CTRL_OFFSET _u(0x00000000) +#define CLOCKS_CLK_GPOUT0_CTRL_BITS _u(0x00131de0) +#define CLOCKS_CLK_GPOUT0_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_GPOUT0_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_GPOUT0_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_GPOUT0_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_GPOUT0_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_GPOUT0_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_GPOUT0_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_GPOUT0_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_GPOUT0_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_DC50 +// Description : Enables duty cycle correction for odd divisors +#define CLOCKS_CLK_GPOUT0_CTRL_DC50_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_DC50_BITS _u(0x00001000) +#define CLOCKS_CLK_GPOUT0_CTRL_DC50_MSB _u(12) +#define CLOCKS_CLK_GPOUT0_CTRL_DC50_LSB _u(12) +#define CLOCKS_CLK_GPOUT0_CTRL_DC50_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_GPOUT0_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_GPOUT0_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_GPOUT0_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_GPOUT0_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_GPOUT0_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_GPOUT0_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_GPOUT0_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_GPOUT0_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_sys +// 0x1 -> clksrc_gpin0 +// 0x2 -> clksrc_gpin1 +// 0x3 -> clksrc_pll_usb +// 0x4 -> rosc_clksrc +// 0x5 -> xosc_clksrc +// 0x6 -> clk_sys +// 0x7 -> clk_usb +// 0x8 -> clk_adc +// 0x9 -> clk_rtc +// 0xa -> clk_ref +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT0_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT0_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_GPOUT0_DIV_OFFSET _u(0x00000004) +#define CLOCKS_CLK_GPOUT0_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT0_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_GPOUT0_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_GPOUT0_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_GPOUT0_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_GPOUT0_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_GPOUT0_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT0_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_GPOUT0_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_GPOUT0_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_GPOUT0_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_GPOUT0_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_GPOUT0_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT0_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_GPOUT0_SELECTED_OFFSET _u(0x00000008) +#define CLOCKS_CLK_GPOUT0_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT0_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_GPOUT0_SELECTED_MSB _u(31) +#define CLOCKS_CLK_GPOUT0_SELECTED_LSB _u(0) +#define CLOCKS_CLK_GPOUT0_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT1_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_GPOUT1_CTRL_OFFSET _u(0x0000000c) +#define CLOCKS_CLK_GPOUT1_CTRL_BITS _u(0x00131de0) +#define CLOCKS_CLK_GPOUT1_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_GPOUT1_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_GPOUT1_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_GPOUT1_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_GPOUT1_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_GPOUT1_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_GPOUT1_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_GPOUT1_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_GPOUT1_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_DC50 +// Description : Enables duty cycle correction for odd divisors +#define CLOCKS_CLK_GPOUT1_CTRL_DC50_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_DC50_BITS _u(0x00001000) +#define CLOCKS_CLK_GPOUT1_CTRL_DC50_MSB _u(12) +#define CLOCKS_CLK_GPOUT1_CTRL_DC50_LSB _u(12) +#define CLOCKS_CLK_GPOUT1_CTRL_DC50_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_GPOUT1_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_GPOUT1_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_GPOUT1_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_GPOUT1_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_GPOUT1_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_GPOUT1_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_GPOUT1_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_GPOUT1_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_sys +// 0x1 -> clksrc_gpin0 +// 0x2 -> clksrc_gpin1 +// 0x3 -> clksrc_pll_usb +// 0x4 -> rosc_clksrc +// 0x5 -> xosc_clksrc +// 0x6 -> clk_sys +// 0x7 -> clk_usb +// 0x8 -> clk_adc +// 0x9 -> clk_rtc +// 0xa -> clk_ref +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT1_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT1_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_GPOUT1_DIV_OFFSET _u(0x00000010) +#define CLOCKS_CLK_GPOUT1_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT1_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_GPOUT1_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_GPOUT1_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_GPOUT1_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_GPOUT1_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_GPOUT1_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT1_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_GPOUT1_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_GPOUT1_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_GPOUT1_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_GPOUT1_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_GPOUT1_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT1_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_GPOUT1_SELECTED_OFFSET _u(0x00000014) +#define CLOCKS_CLK_GPOUT1_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT1_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_GPOUT1_SELECTED_MSB _u(31) +#define CLOCKS_CLK_GPOUT1_SELECTED_LSB _u(0) +#define CLOCKS_CLK_GPOUT1_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT2_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_GPOUT2_CTRL_OFFSET _u(0x00000018) +#define CLOCKS_CLK_GPOUT2_CTRL_BITS _u(0x00131de0) +#define CLOCKS_CLK_GPOUT2_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_GPOUT2_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_GPOUT2_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_GPOUT2_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_GPOUT2_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_GPOUT2_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_GPOUT2_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_GPOUT2_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_GPOUT2_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_DC50 +// Description : Enables duty cycle correction for odd divisors +#define CLOCKS_CLK_GPOUT2_CTRL_DC50_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_DC50_BITS _u(0x00001000) +#define CLOCKS_CLK_GPOUT2_CTRL_DC50_MSB _u(12) +#define CLOCKS_CLK_GPOUT2_CTRL_DC50_LSB _u(12) +#define CLOCKS_CLK_GPOUT2_CTRL_DC50_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_GPOUT2_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_GPOUT2_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_GPOUT2_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_GPOUT2_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_GPOUT2_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_GPOUT2_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_GPOUT2_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_GPOUT2_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_sys +// 0x1 -> clksrc_gpin0 +// 0x2 -> clksrc_gpin1 +// 0x3 -> clksrc_pll_usb +// 0x4 -> rosc_clksrc_ph +// 0x5 -> xosc_clksrc +// 0x6 -> clk_sys +// 0x7 -> clk_usb +// 0x8 -> clk_adc +// 0x9 -> clk_rtc +// 0xa -> clk_ref +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x4) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT2_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT2_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_GPOUT2_DIV_OFFSET _u(0x0000001c) +#define CLOCKS_CLK_GPOUT2_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT2_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_GPOUT2_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_GPOUT2_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_GPOUT2_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_GPOUT2_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_GPOUT2_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT2_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_GPOUT2_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_GPOUT2_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_GPOUT2_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_GPOUT2_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_GPOUT2_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT2_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_GPOUT2_SELECTED_OFFSET _u(0x00000020) +#define CLOCKS_CLK_GPOUT2_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT2_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_GPOUT2_SELECTED_MSB _u(31) +#define CLOCKS_CLK_GPOUT2_SELECTED_LSB _u(0) +#define CLOCKS_CLK_GPOUT2_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT3_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_GPOUT3_CTRL_OFFSET _u(0x00000024) +#define CLOCKS_CLK_GPOUT3_CTRL_BITS _u(0x00131de0) +#define CLOCKS_CLK_GPOUT3_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_GPOUT3_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_GPOUT3_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_GPOUT3_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_GPOUT3_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_GPOUT3_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_GPOUT3_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_GPOUT3_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_GPOUT3_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_DC50 +// Description : Enables duty cycle correction for odd divisors +#define CLOCKS_CLK_GPOUT3_CTRL_DC50_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_DC50_BITS _u(0x00001000) +#define CLOCKS_CLK_GPOUT3_CTRL_DC50_MSB _u(12) +#define CLOCKS_CLK_GPOUT3_CTRL_DC50_LSB _u(12) +#define CLOCKS_CLK_GPOUT3_CTRL_DC50_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_GPOUT3_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_GPOUT3_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_GPOUT3_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_GPOUT3_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_GPOUT3_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_GPOUT3_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_GPOUT3_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_GPOUT3_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_sys +// 0x1 -> clksrc_gpin0 +// 0x2 -> clksrc_gpin1 +// 0x3 -> clksrc_pll_usb +// 0x4 -> rosc_clksrc_ph +// 0x5 -> xosc_clksrc +// 0x6 -> clk_sys +// 0x7 -> clk_usb +// 0x8 -> clk_adc +// 0x9 -> clk_rtc +// 0xa -> clk_ref +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_BITS _u(0x000001e0) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_MSB _u(8) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x3) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x4) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x5) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x6) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_USB _u(0x7) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_ADC _u(0x8) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_RTC _u(0x9) +#define CLOCKS_CLK_GPOUT3_CTRL_AUXSRC_VALUE_CLK_REF _u(0xa) +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT3_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_GPOUT3_DIV_OFFSET _u(0x00000028) +#define CLOCKS_CLK_GPOUT3_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT3_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_GPOUT3_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_GPOUT3_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_GPOUT3_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_GPOUT3_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_GPOUT3_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_GPOUT3_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_GPOUT3_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_GPOUT3_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_GPOUT3_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_GPOUT3_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_GPOUT3_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_GPOUT3_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_GPOUT3_SELECTED_OFFSET _u(0x0000002c) +#define CLOCKS_CLK_GPOUT3_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_GPOUT3_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_GPOUT3_SELECTED_MSB _u(31) +#define CLOCKS_CLK_GPOUT3_SELECTED_LSB _u(0) +#define CLOCKS_CLK_GPOUT3_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_REF_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_REF_CTRL_OFFSET _u(0x00000030) +#define CLOCKS_CLK_REF_CTRL_BITS _u(0x00000063) +#define CLOCKS_CLK_REF_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_REF_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_usb +// 0x1 -> clksrc_gpin0 +// 0x2 -> clksrc_gpin1 +#define CLOCKS_CLK_REF_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_BITS _u(0x00000060) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_MSB _u(6) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x1) +#define CLOCKS_CLK_REF_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x2) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_REF_CTRL_SRC +// Description : Selects the clock source glitchlessly, can be changed on-the- +// fly +// 0x0 -> rosc_clksrc_ph +// 0x1 -> clksrc_clk_ref_aux +// 0x2 -> xosc_clksrc +#define CLOCKS_CLK_REF_CTRL_SRC_RESET "-" +#define CLOCKS_CLK_REF_CTRL_SRC_BITS _u(0x00000003) +#define CLOCKS_CLK_REF_CTRL_SRC_MSB _u(1) +#define CLOCKS_CLK_REF_CTRL_SRC_LSB _u(0) +#define CLOCKS_CLK_REF_CTRL_SRC_ACCESS "RW" +#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_ROSC_CLKSRC_PH _u(0x0) +#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_CLKSRC_CLK_REF_AUX _u(0x1) +#define CLOCKS_CLK_REF_CTRL_SRC_VALUE_XOSC_CLKSRC _u(0x2) +// ============================================================================= +// Register : CLOCKS_CLK_REF_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_REF_DIV_OFFSET _u(0x00000034) +#define CLOCKS_CLK_REF_DIV_BITS _u(0x00000300) +#define CLOCKS_CLK_REF_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_REF_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_REF_DIV_INT_RESET _u(0x1) +#define CLOCKS_CLK_REF_DIV_INT_BITS _u(0x00000300) +#define CLOCKS_CLK_REF_DIV_INT_MSB _u(9) +#define CLOCKS_CLK_REF_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_REF_DIV_INT_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_REF_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// The glitchless multiplexer does not switch instantaneously (to +// avoid glitches), so software should poll this register to wait +// for the switch to complete. This register contains one decoded +// bit for each of the clock sources enumerated in the CTRL SRC +// field. At most one of these bits will be set at any time, +// indicating that clock is currently present at the output of the +// glitchless mux. Whilst switching is in progress, this register +// may briefly show all-0s. +#define CLOCKS_CLK_REF_SELECTED_OFFSET _u(0x00000038) +#define CLOCKS_CLK_REF_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_REF_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_REF_SELECTED_MSB _u(31) +#define CLOCKS_CLK_REF_SELECTED_LSB _u(0) +#define CLOCKS_CLK_REF_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_SYS_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_SYS_CTRL_OFFSET _u(0x0000003c) +#define CLOCKS_CLK_SYS_CTRL_BITS _u(0x000000e1) +#define CLOCKS_CLK_SYS_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_sys +// 0x1 -> clksrc_pll_usb +// 0x2 -> rosc_clksrc +// 0x3 -> xosc_clksrc +// 0x4 -> clksrc_gpin0 +// 0x5 -> clksrc_gpin1 +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x1) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_ROSC_CLKSRC _u(0x2) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_SYS_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_CTRL_SRC +// Description : Selects the clock source glitchlessly, can be changed on-the- +// fly +// 0x0 -> clk_ref +// 0x1 -> clksrc_clk_sys_aux +#define CLOCKS_CLK_SYS_CTRL_SRC_RESET _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_SRC_BITS _u(0x00000001) +#define CLOCKS_CLK_SYS_CTRL_SRC_MSB _u(0) +#define CLOCKS_CLK_SYS_CTRL_SRC_LSB _u(0) +#define CLOCKS_CLK_SYS_CTRL_SRC_ACCESS "RW" +#define CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLK_REF _u(0x0) +#define CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLKSRC_CLK_SYS_AUX _u(0x1) +// ============================================================================= +// Register : CLOCKS_CLK_SYS_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_SYS_DIV_OFFSET _u(0x00000040) +#define CLOCKS_CLK_SYS_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_SYS_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_SYS_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_SYS_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_SYS_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_SYS_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_SYS_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_SYS_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_SYS_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_SYS_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_SYS_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_SYS_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_SYS_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// The glitchless multiplexer does not switch instantaneously (to +// avoid glitches), so software should poll this register to wait +// for the switch to complete. This register contains one decoded +// bit for each of the clock sources enumerated in the CTRL SRC +// field. At most one of these bits will be set at any time, +// indicating that clock is currently present at the output of the +// glitchless mux. Whilst switching is in progress, this register +// may briefly show all-0s. +#define CLOCKS_CLK_SYS_SELECTED_OFFSET _u(0x00000044) +#define CLOCKS_CLK_SYS_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_SYS_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_SYS_SELECTED_MSB _u(31) +#define CLOCKS_CLK_SYS_SELECTED_LSB _u(0) +#define CLOCKS_CLK_SYS_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_PERI_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_PERI_CTRL_OFFSET _u(0x00000048) +#define CLOCKS_CLK_PERI_CTRL_BITS _u(0x00000ce0) +#define CLOCKS_CLK_PERI_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_PERI_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_PERI_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_PERI_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_PERI_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_PERI_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_PERI_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_PERI_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_PERI_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_PERI_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_PERI_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_PERI_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clk_sys +// 0x1 -> clksrc_pll_sys +// 0x2 -> clksrc_pll_usb +// 0x3 -> rosc_clksrc_ph +// 0x4 -> xosc_clksrc +// 0x5 -> clksrc_gpin0 +// 0x6 -> clksrc_gpin1 +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLK_SYS _u(0x0) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x2) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x3) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x4) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x5) +#define CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x6) +// ============================================================================= +// Register : CLOCKS_CLK_PERI_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_PERI_SELECTED_OFFSET _u(0x00000050) +#define CLOCKS_CLK_PERI_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_PERI_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_PERI_SELECTED_MSB _u(31) +#define CLOCKS_CLK_PERI_SELECTED_LSB _u(0) +#define CLOCKS_CLK_PERI_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_USB_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_USB_CTRL_OFFSET _u(0x00000054) +#define CLOCKS_CLK_USB_CTRL_BITS _u(0x00130ce0) +#define CLOCKS_CLK_USB_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_USB_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_USB_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_USB_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_USB_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_USB_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_USB_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_USB_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_USB_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_USB_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_USB_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_USB_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_USB_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_USB_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_USB_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_USB_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_USB_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_usb +// 0x1 -> clksrc_pll_sys +// 0x2 -> rosc_clksrc_ph +// 0x3 -> xosc_clksrc +// 0x4 -> clksrc_gpin0 +// 0x5 -> clksrc_gpin1 +#define CLOCKS_CLK_USB_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_USB_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +// ============================================================================= +// Register : CLOCKS_CLK_USB_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_USB_DIV_OFFSET _u(0x00000058) +#define CLOCKS_CLK_USB_DIV_BITS _u(0x00000300) +#define CLOCKS_CLK_USB_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_USB_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_USB_DIV_INT_RESET _u(0x1) +#define CLOCKS_CLK_USB_DIV_INT_BITS _u(0x00000300) +#define CLOCKS_CLK_USB_DIV_INT_MSB _u(9) +#define CLOCKS_CLK_USB_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_USB_DIV_INT_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_USB_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_USB_SELECTED_OFFSET _u(0x0000005c) +#define CLOCKS_CLK_USB_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_USB_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_USB_SELECTED_MSB _u(31) +#define CLOCKS_CLK_USB_SELECTED_LSB _u(0) +#define CLOCKS_CLK_USB_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_ADC_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_ADC_CTRL_OFFSET _u(0x00000060) +#define CLOCKS_CLK_ADC_CTRL_BITS _u(0x00130ce0) +#define CLOCKS_CLK_ADC_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_ADC_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_ADC_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_ADC_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_ADC_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_ADC_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_ADC_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_ADC_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_ADC_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_ADC_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_ADC_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_ADC_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_ADC_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_ADC_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_ADC_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_ADC_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_ADC_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_usb +// 0x1 -> clksrc_pll_sys +// 0x2 -> rosc_clksrc_ph +// 0x3 -> xosc_clksrc +// 0x4 -> clksrc_gpin0 +// 0x5 -> clksrc_gpin1 +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_ADC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +// ============================================================================= +// Register : CLOCKS_CLK_ADC_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_ADC_DIV_OFFSET _u(0x00000064) +#define CLOCKS_CLK_ADC_DIV_BITS _u(0x00000300) +#define CLOCKS_CLK_ADC_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_ADC_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_ADC_DIV_INT_RESET _u(0x1) +#define CLOCKS_CLK_ADC_DIV_INT_BITS _u(0x00000300) +#define CLOCKS_CLK_ADC_DIV_INT_MSB _u(9) +#define CLOCKS_CLK_ADC_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_ADC_DIV_INT_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_ADC_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_ADC_SELECTED_OFFSET _u(0x00000068) +#define CLOCKS_CLK_ADC_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_ADC_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_ADC_SELECTED_MSB _u(31) +#define CLOCKS_CLK_ADC_SELECTED_LSB _u(0) +#define CLOCKS_CLK_ADC_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_RTC_CTRL +// Description : Clock control, can be changed on-the-fly (except for auxsrc) +#define CLOCKS_CLK_RTC_CTRL_OFFSET _u(0x0000006c) +#define CLOCKS_CLK_RTC_CTRL_BITS _u(0x00130ce0) +#define CLOCKS_CLK_RTC_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_CTRL_NUDGE +// Description : An edge on this signal shifts the phase of the output by 1 +// cycle of the input clock +// This can be done at any time +#define CLOCKS_CLK_RTC_CTRL_NUDGE_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_NUDGE_BITS _u(0x00100000) +#define CLOCKS_CLK_RTC_CTRL_NUDGE_MSB _u(20) +#define CLOCKS_CLK_RTC_CTRL_NUDGE_LSB _u(20) +#define CLOCKS_CLK_RTC_CTRL_NUDGE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_CTRL_PHASE +// Description : This delays the enable signal by up to 3 cycles of the input +// clock +// This must be set before the clock is enabled to have any effect +#define CLOCKS_CLK_RTC_CTRL_PHASE_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_PHASE_BITS _u(0x00030000) +#define CLOCKS_CLK_RTC_CTRL_PHASE_MSB _u(17) +#define CLOCKS_CLK_RTC_CTRL_PHASE_LSB _u(16) +#define CLOCKS_CLK_RTC_CTRL_PHASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_CTRL_ENABLE +// Description : Starts and stops the clock generator cleanly +#define CLOCKS_CLK_RTC_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_ENABLE_BITS _u(0x00000800) +#define CLOCKS_CLK_RTC_CTRL_ENABLE_MSB _u(11) +#define CLOCKS_CLK_RTC_CTRL_ENABLE_LSB _u(11) +#define CLOCKS_CLK_RTC_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_CTRL_KILL +// Description : Asynchronously kills the clock generator +#define CLOCKS_CLK_RTC_CTRL_KILL_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_KILL_BITS _u(0x00000400) +#define CLOCKS_CLK_RTC_CTRL_KILL_MSB _u(10) +#define CLOCKS_CLK_RTC_CTRL_KILL_LSB _u(10) +#define CLOCKS_CLK_RTC_CTRL_KILL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_CTRL_AUXSRC +// Description : Selects the auxiliary clock source, will glitch when switching +// 0x0 -> clksrc_pll_usb +// 0x1 -> clksrc_pll_sys +// 0x2 -> rosc_clksrc_ph +// 0x3 -> xosc_clksrc +// 0x4 -> clksrc_gpin0 +// 0x5 -> clksrc_gpin1 +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_RESET _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_BITS _u(0x000000e0) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_MSB _u(7) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_LSB _u(5) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_ACCESS "RW" +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_USB _u(0x0) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_PLL_SYS _u(0x1) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_ROSC_CLKSRC_PH _u(0x2) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC _u(0x3) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN0 _u(0x4) +#define CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_CLKSRC_GPIN1 _u(0x5) +// ============================================================================= +// Register : CLOCKS_CLK_RTC_DIV +// Description : Clock divisor, can be changed on-the-fly +#define CLOCKS_CLK_RTC_DIV_OFFSET _u(0x00000070) +#define CLOCKS_CLK_RTC_DIV_BITS _u(0xffffffff) +#define CLOCKS_CLK_RTC_DIV_RESET _u(0x00000100) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_DIV_INT +// Description : Integer component of the divisor, 0 -> divide by 2^16 +#define CLOCKS_CLK_RTC_DIV_INT_RESET _u(0x000001) +#define CLOCKS_CLK_RTC_DIV_INT_BITS _u(0xffffff00) +#define CLOCKS_CLK_RTC_DIV_INT_MSB _u(31) +#define CLOCKS_CLK_RTC_DIV_INT_LSB _u(8) +#define CLOCKS_CLK_RTC_DIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_RTC_DIV_FRAC +// Description : Fractional component of the divisor +#define CLOCKS_CLK_RTC_DIV_FRAC_RESET _u(0x00) +#define CLOCKS_CLK_RTC_DIV_FRAC_BITS _u(0x000000ff) +#define CLOCKS_CLK_RTC_DIV_FRAC_MSB _u(7) +#define CLOCKS_CLK_RTC_DIV_FRAC_LSB _u(0) +#define CLOCKS_CLK_RTC_DIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_RTC_SELECTED +// Description : Indicates which SRC is currently selected by the glitchless mux +// (one-hot). +// This slice does not have a glitchless mux (only the AUX_SRC +// field is present, not SRC) so this register is hardwired to +// 0x1. +#define CLOCKS_CLK_RTC_SELECTED_OFFSET _u(0x00000074) +#define CLOCKS_CLK_RTC_SELECTED_BITS _u(0xffffffff) +#define CLOCKS_CLK_RTC_SELECTED_RESET _u(0x00000001) +#define CLOCKS_CLK_RTC_SELECTED_MSB _u(31) +#define CLOCKS_CLK_RTC_SELECTED_LSB _u(0) +#define CLOCKS_CLK_RTC_SELECTED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_CLK_SYS_RESUS_CTRL +#define CLOCKS_CLK_SYS_RESUS_CTRL_OFFSET _u(0x00000078) +#define CLOCKS_CLK_SYS_RESUS_CTRL_BITS _u(0x000111ff) +#define CLOCKS_CLK_SYS_RESUS_CTRL_RESET _u(0x000000ff) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR +// Description : For clearing the resus after the fault that triggered it has +// been corrected +#define CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR_RESET _u(0x0) +#define CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR_BITS _u(0x00010000) +#define CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR_MSB _u(16) +#define CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR_LSB _u(16) +#define CLOCKS_CLK_SYS_RESUS_CTRL_CLEAR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_RESUS_CTRL_FRCE +// Description : Force a resus, for test purposes only +#define CLOCKS_CLK_SYS_RESUS_CTRL_FRCE_RESET _u(0x0) +#define CLOCKS_CLK_SYS_RESUS_CTRL_FRCE_BITS _u(0x00001000) +#define CLOCKS_CLK_SYS_RESUS_CTRL_FRCE_MSB _u(12) +#define CLOCKS_CLK_SYS_RESUS_CTRL_FRCE_LSB _u(12) +#define CLOCKS_CLK_SYS_RESUS_CTRL_FRCE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE +// Description : Enable resus +#define CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE_RESET _u(0x0) +#define CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE_BITS _u(0x00000100) +#define CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE_MSB _u(8) +#define CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE_LSB _u(8) +#define CLOCKS_CLK_SYS_RESUS_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT +// Description : This is expressed as a number of clk_ref cycles +// and must be >= 2x clk_ref_freq/min_clk_tst_freq +#define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_RESET _u(0xff) +#define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_BITS _u(0x000000ff) +#define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_MSB _u(7) +#define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_LSB _u(0) +#define CLOCKS_CLK_SYS_RESUS_CTRL_TIMEOUT_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_CLK_SYS_RESUS_STATUS +#define CLOCKS_CLK_SYS_RESUS_STATUS_OFFSET _u(0x0000007c) +#define CLOCKS_CLK_SYS_RESUS_STATUS_BITS _u(0x00000001) +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED +// Description : Clock has been resuscitated, correct the error then send +// ctrl_clear=1 +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED_RESET _u(0x0) +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED_BITS _u(0x00000001) +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED_MSB _u(0) +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED_LSB _u(0) +#define CLOCKS_CLK_SYS_RESUS_STATUS_RESUSSED_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_FC0_REF_KHZ +// Description : Reference clock frequency in kHz +#define CLOCKS_FC0_REF_KHZ_OFFSET _u(0x00000080) +#define CLOCKS_FC0_REF_KHZ_BITS _u(0x000fffff) +#define CLOCKS_FC0_REF_KHZ_RESET _u(0x00000000) +#define CLOCKS_FC0_REF_KHZ_MSB _u(19) +#define CLOCKS_FC0_REF_KHZ_LSB _u(0) +#define CLOCKS_FC0_REF_KHZ_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_FC0_MIN_KHZ +// Description : Minimum pass frequency in kHz. This is optional. Set to 0 if +// you are not using the pass/fail flags +#define CLOCKS_FC0_MIN_KHZ_OFFSET _u(0x00000084) +#define CLOCKS_FC0_MIN_KHZ_BITS _u(0x01ffffff) +#define CLOCKS_FC0_MIN_KHZ_RESET _u(0x00000000) +#define CLOCKS_FC0_MIN_KHZ_MSB _u(24) +#define CLOCKS_FC0_MIN_KHZ_LSB _u(0) +#define CLOCKS_FC0_MIN_KHZ_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_FC0_MAX_KHZ +// Description : Maximum pass frequency in kHz. This is optional. Set to +// 0x1ffffff if you are not using the pass/fail flags +#define CLOCKS_FC0_MAX_KHZ_OFFSET _u(0x00000088) +#define CLOCKS_FC0_MAX_KHZ_BITS _u(0x01ffffff) +#define CLOCKS_FC0_MAX_KHZ_RESET _u(0x01ffffff) +#define CLOCKS_FC0_MAX_KHZ_MSB _u(24) +#define CLOCKS_FC0_MAX_KHZ_LSB _u(0) +#define CLOCKS_FC0_MAX_KHZ_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_FC0_DELAY +// Description : Delays the start of frequency counting to allow the mux to +// settle +// Delay is measured in multiples of the reference clock period +#define CLOCKS_FC0_DELAY_OFFSET _u(0x0000008c) +#define CLOCKS_FC0_DELAY_BITS _u(0x00000007) +#define CLOCKS_FC0_DELAY_RESET _u(0x00000001) +#define CLOCKS_FC0_DELAY_MSB _u(2) +#define CLOCKS_FC0_DELAY_LSB _u(0) +#define CLOCKS_FC0_DELAY_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_FC0_INTERVAL +// Description : The test interval is 0.98us * 2**interval, but let's call it +// 1us * 2**interval +// The default gives a test interval of 250us +#define CLOCKS_FC0_INTERVAL_OFFSET _u(0x00000090) +#define CLOCKS_FC0_INTERVAL_BITS _u(0x0000000f) +#define CLOCKS_FC0_INTERVAL_RESET _u(0x00000008) +#define CLOCKS_FC0_INTERVAL_MSB _u(3) +#define CLOCKS_FC0_INTERVAL_LSB _u(0) +#define CLOCKS_FC0_INTERVAL_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_FC0_SRC +// Description : Clock sent to frequency counter, set to 0 when not required +// Writing to this register initiates the frequency count +// 0x00 -> NULL +// 0x01 -> pll_sys_clksrc_primary +// 0x02 -> pll_usb_clksrc_primary +// 0x03 -> rosc_clksrc +// 0x04 -> rosc_clksrc_ph +// 0x05 -> xosc_clksrc +// 0x06 -> clksrc_gpin0 +// 0x07 -> clksrc_gpin1 +// 0x08 -> clk_ref +// 0x09 -> clk_sys +// 0x0a -> clk_peri +// 0x0b -> clk_usb +// 0x0c -> clk_adc +// 0x0d -> clk_rtc +#define CLOCKS_FC0_SRC_OFFSET _u(0x00000094) +#define CLOCKS_FC0_SRC_BITS _u(0x000000ff) +#define CLOCKS_FC0_SRC_RESET _u(0x00000000) +#define CLOCKS_FC0_SRC_MSB _u(7) +#define CLOCKS_FC0_SRC_LSB _u(0) +#define CLOCKS_FC0_SRC_ACCESS "RW" +#define CLOCKS_FC0_SRC_VALUE_NULL _u(0x00) +#define CLOCKS_FC0_SRC_VALUE_PLL_SYS_CLKSRC_PRIMARY _u(0x01) +#define CLOCKS_FC0_SRC_VALUE_PLL_USB_CLKSRC_PRIMARY _u(0x02) +#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC _u(0x03) +#define CLOCKS_FC0_SRC_VALUE_ROSC_CLKSRC_PH _u(0x04) +#define CLOCKS_FC0_SRC_VALUE_XOSC_CLKSRC _u(0x05) +#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN0 _u(0x06) +#define CLOCKS_FC0_SRC_VALUE_CLKSRC_GPIN1 _u(0x07) +#define CLOCKS_FC0_SRC_VALUE_CLK_REF _u(0x08) +#define CLOCKS_FC0_SRC_VALUE_CLK_SYS _u(0x09) +#define CLOCKS_FC0_SRC_VALUE_CLK_PERI _u(0x0a) +#define CLOCKS_FC0_SRC_VALUE_CLK_USB _u(0x0b) +#define CLOCKS_FC0_SRC_VALUE_CLK_ADC _u(0x0c) +#define CLOCKS_FC0_SRC_VALUE_CLK_RTC _u(0x0d) +// ============================================================================= +// Register : CLOCKS_FC0_STATUS +// Description : Frequency counter status +#define CLOCKS_FC0_STATUS_OFFSET _u(0x00000098) +#define CLOCKS_FC0_STATUS_BITS _u(0x11111111) +#define CLOCKS_FC0_STATUS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_DIED +// Description : Test clock stopped during test +#define CLOCKS_FC0_STATUS_DIED_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_DIED_BITS _u(0x10000000) +#define CLOCKS_FC0_STATUS_DIED_MSB _u(28) +#define CLOCKS_FC0_STATUS_DIED_LSB _u(28) +#define CLOCKS_FC0_STATUS_DIED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_FAST +// Description : Test clock faster than expected, only valid when status_done=1 +#define CLOCKS_FC0_STATUS_FAST_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_FAST_BITS _u(0x01000000) +#define CLOCKS_FC0_STATUS_FAST_MSB _u(24) +#define CLOCKS_FC0_STATUS_FAST_LSB _u(24) +#define CLOCKS_FC0_STATUS_FAST_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_SLOW +// Description : Test clock slower than expected, only valid when status_done=1 +#define CLOCKS_FC0_STATUS_SLOW_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_SLOW_BITS _u(0x00100000) +#define CLOCKS_FC0_STATUS_SLOW_MSB _u(20) +#define CLOCKS_FC0_STATUS_SLOW_LSB _u(20) +#define CLOCKS_FC0_STATUS_SLOW_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_FAIL +// Description : Test failed +#define CLOCKS_FC0_STATUS_FAIL_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_FAIL_BITS _u(0x00010000) +#define CLOCKS_FC0_STATUS_FAIL_MSB _u(16) +#define CLOCKS_FC0_STATUS_FAIL_LSB _u(16) +#define CLOCKS_FC0_STATUS_FAIL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_WAITING +// Description : Waiting for test clock to start +#define CLOCKS_FC0_STATUS_WAITING_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_WAITING_BITS _u(0x00001000) +#define CLOCKS_FC0_STATUS_WAITING_MSB _u(12) +#define CLOCKS_FC0_STATUS_WAITING_LSB _u(12) +#define CLOCKS_FC0_STATUS_WAITING_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_RUNNING +// Description : Test running +#define CLOCKS_FC0_STATUS_RUNNING_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_RUNNING_BITS _u(0x00000100) +#define CLOCKS_FC0_STATUS_RUNNING_MSB _u(8) +#define CLOCKS_FC0_STATUS_RUNNING_LSB _u(8) +#define CLOCKS_FC0_STATUS_RUNNING_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_DONE +// Description : Test complete +#define CLOCKS_FC0_STATUS_DONE_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_DONE_BITS _u(0x00000010) +#define CLOCKS_FC0_STATUS_DONE_MSB _u(4) +#define CLOCKS_FC0_STATUS_DONE_LSB _u(4) +#define CLOCKS_FC0_STATUS_DONE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_STATUS_PASS +// Description : Test passed +#define CLOCKS_FC0_STATUS_PASS_RESET _u(0x0) +#define CLOCKS_FC0_STATUS_PASS_BITS _u(0x00000001) +#define CLOCKS_FC0_STATUS_PASS_MSB _u(0) +#define CLOCKS_FC0_STATUS_PASS_LSB _u(0) +#define CLOCKS_FC0_STATUS_PASS_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_FC0_RESULT +// Description : Result of frequency measurement, only valid when status_done=1 +#define CLOCKS_FC0_RESULT_OFFSET _u(0x0000009c) +#define CLOCKS_FC0_RESULT_BITS _u(0x3fffffff) +#define CLOCKS_FC0_RESULT_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_RESULT_KHZ +#define CLOCKS_FC0_RESULT_KHZ_RESET _u(0x0000000) +#define CLOCKS_FC0_RESULT_KHZ_BITS _u(0x3fffffe0) +#define CLOCKS_FC0_RESULT_KHZ_MSB _u(29) +#define CLOCKS_FC0_RESULT_KHZ_LSB _u(5) +#define CLOCKS_FC0_RESULT_KHZ_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_FC0_RESULT_FRAC +#define CLOCKS_FC0_RESULT_FRAC_RESET _u(0x00) +#define CLOCKS_FC0_RESULT_FRAC_BITS _u(0x0000001f) +#define CLOCKS_FC0_RESULT_FRAC_MSB _u(4) +#define CLOCKS_FC0_RESULT_FRAC_LSB _u(0) +#define CLOCKS_FC0_RESULT_FRAC_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_WAKE_EN0 +// Description : enable clock in wake mode +#define CLOCKS_WAKE_EN0_OFFSET _u(0x000000a0) +#define CLOCKS_WAKE_EN0_BITS _u(0xffffffff) +#define CLOCKS_WAKE_EN0_RESET _u(0xffffffff) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM3 +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_BITS _u(0x80000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_MSB _u(31) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_LSB _u(31) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM2 +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_BITS _u(0x40000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_MSB _u(30) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_LSB _u(30) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM1 +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_BITS _u(0x20000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_MSB _u(29) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_LSB _u(29) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SRAM0 +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_BITS _u(0x10000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_MSB _u(28) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_LSB _u(28) +#define CLOCKS_WAKE_EN0_CLK_SYS_SRAM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SPI1 +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_BITS _u(0x08000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_MSB _u(27) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_LSB _u(27) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_PERI_SPI1 +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_BITS _u(0x04000000) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_MSB _u(26) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_LSB _u(26) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SPI0 +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_BITS _u(0x02000000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_MSB _u(25) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_LSB _u(25) +#define CLOCKS_WAKE_EN0_CLK_SYS_SPI0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_PERI_SPI0 +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_BITS _u(0x01000000) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_MSB _u(24) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_LSB _u(24) +#define CLOCKS_WAKE_EN0_CLK_PERI_SPI0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_SIO +#define CLOCKS_WAKE_EN0_CLK_SYS_SIO_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_SIO_BITS _u(0x00800000) +#define CLOCKS_WAKE_EN0_CLK_SYS_SIO_MSB _u(23) +#define CLOCKS_WAKE_EN0_CLK_SYS_SIO_LSB _u(23) +#define CLOCKS_WAKE_EN0_CLK_SYS_SIO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_RTC +#define CLOCKS_WAKE_EN0_CLK_SYS_RTC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_RTC_BITS _u(0x00400000) +#define CLOCKS_WAKE_EN0_CLK_SYS_RTC_MSB _u(22) +#define CLOCKS_WAKE_EN0_CLK_SYS_RTC_LSB _u(22) +#define CLOCKS_WAKE_EN0_CLK_SYS_RTC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_RTC_RTC +#define CLOCKS_WAKE_EN0_CLK_RTC_RTC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_RTC_RTC_BITS _u(0x00200000) +#define CLOCKS_WAKE_EN0_CLK_RTC_RTC_MSB _u(21) +#define CLOCKS_WAKE_EN0_CLK_RTC_RTC_LSB _u(21) +#define CLOCKS_WAKE_EN0_CLK_RTC_RTC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_ROSC +#define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_BITS _u(0x00100000) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_MSB _u(20) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_LSB _u(20) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROSC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_ROM +#define CLOCKS_WAKE_EN0_CLK_SYS_ROM_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROM_BITS _u(0x00080000) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROM_MSB _u(19) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROM_LSB _u(19) +#define CLOCKS_WAKE_EN0_CLK_SYS_ROM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_RESETS +#define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_BITS _u(0x00040000) +#define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_MSB _u(18) +#define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_LSB _u(18) +#define CLOCKS_WAKE_EN0_CLK_SYS_RESETS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PWM +#define CLOCKS_WAKE_EN0_CLK_SYS_PWM_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PWM_BITS _u(0x00020000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PWM_MSB _u(17) +#define CLOCKS_WAKE_EN0_CLK_SYS_PWM_LSB _u(17) +#define CLOCKS_WAKE_EN0_CLK_SYS_PWM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PSM +#define CLOCKS_WAKE_EN0_CLK_SYS_PSM_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PSM_BITS _u(0x00010000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PSM_MSB _u(16) +#define CLOCKS_WAKE_EN0_CLK_SYS_PSM_LSB _u(16) +#define CLOCKS_WAKE_EN0_CLK_SYS_PSM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_BITS _u(0x00008000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_MSB _u(15) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_LSB _u(15) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_USB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_MSB _u(14) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_LSB _u(14) +#define CLOCKS_WAKE_EN0_CLK_SYS_PLL_SYS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PIO1 +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_BITS _u(0x00002000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_MSB _u(13) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_LSB _u(13) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PIO0 +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_BITS _u(0x00001000) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_MSB _u(12) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_LSB _u(12) +#define CLOCKS_WAKE_EN0_CLK_SYS_PIO0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_PADS +#define CLOCKS_WAKE_EN0_CLK_SYS_PADS_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_PADS_BITS _u(0x00000800) +#define CLOCKS_WAKE_EN0_CLK_SYS_PADS_MSB _u(11) +#define CLOCKS_WAKE_EN0_CLK_SYS_PADS_LSB _u(11) +#define CLOCKS_WAKE_EN0_CLK_SYS_PADS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET +#define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) +#define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) +#define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_LSB _u(10) +#define CLOCKS_WAKE_EN0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_JTAG +#define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_BITS _u(0x00000200) +#define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_MSB _u(9) +#define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_LSB _u(9) +#define CLOCKS_WAKE_EN0_CLK_SYS_JTAG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_IO +#define CLOCKS_WAKE_EN0_CLK_SYS_IO_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_IO_BITS _u(0x00000100) +#define CLOCKS_WAKE_EN0_CLK_SYS_IO_MSB _u(8) +#define CLOCKS_WAKE_EN0_CLK_SYS_IO_LSB _u(8) +#define CLOCKS_WAKE_EN0_CLK_SYS_IO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_I2C1 +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_BITS _u(0x00000080) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_MSB _u(7) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_LSB _u(7) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_I2C0 +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_BITS _u(0x00000040) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_MSB _u(6) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_LSB _u(6) +#define CLOCKS_WAKE_EN0_CLK_SYS_I2C0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_DMA +#define CLOCKS_WAKE_EN0_CLK_SYS_DMA_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_DMA_BITS _u(0x00000020) +#define CLOCKS_WAKE_EN0_CLK_SYS_DMA_MSB _u(5) +#define CLOCKS_WAKE_EN0_CLK_SYS_DMA_LSB _u(5) +#define CLOCKS_WAKE_EN0_CLK_SYS_DMA_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_MSB _u(4) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_LSB _u(4) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSFABRIC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_MSB _u(3) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_LSB _u(3) +#define CLOCKS_WAKE_EN0_CLK_SYS_BUSCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_ADC +#define CLOCKS_WAKE_EN0_CLK_SYS_ADC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_ADC_BITS _u(0x00000004) +#define CLOCKS_WAKE_EN0_CLK_SYS_ADC_MSB _u(2) +#define CLOCKS_WAKE_EN0_CLK_SYS_ADC_LSB _u(2) +#define CLOCKS_WAKE_EN0_CLK_SYS_ADC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_ADC_ADC +#define CLOCKS_WAKE_EN0_CLK_ADC_ADC_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_ADC_ADC_BITS _u(0x00000002) +#define CLOCKS_WAKE_EN0_CLK_ADC_ADC_MSB _u(1) +#define CLOCKS_WAKE_EN0_CLK_ADC_ADC_LSB _u(1) +#define CLOCKS_WAKE_EN0_CLK_ADC_ADC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS +#define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_RESET _u(0x1) +#define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_BITS _u(0x00000001) +#define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_MSB _u(0) +#define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_LSB _u(0) +#define CLOCKS_WAKE_EN0_CLK_SYS_CLOCKS_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_WAKE_EN1 +// Description : enable clock in wake mode +#define CLOCKS_WAKE_EN1_OFFSET _u(0x000000a4) +#define CLOCKS_WAKE_EN1_BITS _u(0x00007fff) +#define CLOCKS_WAKE_EN1_RESET _u(0x00007fff) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_XOSC +#define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_BITS _u(0x00004000) +#define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_MSB _u(14) +#define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_LSB _u(14) +#define CLOCKS_WAKE_EN1_CLK_SYS_XOSC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_XIP +#define CLOCKS_WAKE_EN1_CLK_SYS_XIP_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_XIP_BITS _u(0x00002000) +#define CLOCKS_WAKE_EN1_CLK_SYS_XIP_MSB _u(13) +#define CLOCKS_WAKE_EN1_CLK_SYS_XIP_LSB _u(13) +#define CLOCKS_WAKE_EN1_CLK_SYS_XIP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG +#define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) +#define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_MSB _u(12) +#define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_LSB _u(12) +#define CLOCKS_WAKE_EN1_CLK_SYS_WATCHDOG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_USB_USBCTRL +#define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_BITS _u(0x00000800) +#define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_MSB _u(11) +#define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_LSB _u(11) +#define CLOCKS_WAKE_EN1_CLK_USB_USBCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL +#define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_BITS _u(0x00000400) +#define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_MSB _u(10) +#define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_LSB _u(10) +#define CLOCKS_WAKE_EN1_CLK_SYS_USBCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_UART1 +#define CLOCKS_WAKE_EN1_CLK_SYS_UART1_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART1_BITS _u(0x00000200) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART1_MSB _u(9) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART1_LSB _u(9) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_PERI_UART1 +#define CLOCKS_WAKE_EN1_CLK_PERI_UART1_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART1_BITS _u(0x00000100) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART1_MSB _u(8) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART1_LSB _u(8) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_UART0 +#define CLOCKS_WAKE_EN1_CLK_SYS_UART0_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART0_BITS _u(0x00000080) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART0_MSB _u(7) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART0_LSB _u(7) +#define CLOCKS_WAKE_EN1_CLK_SYS_UART0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_PERI_UART0 +#define CLOCKS_WAKE_EN1_CLK_PERI_UART0_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART0_BITS _u(0x00000040) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART0_MSB _u(6) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART0_LSB _u(6) +#define CLOCKS_WAKE_EN1_CLK_PERI_UART0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_TIMER +#define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_BITS _u(0x00000020) +#define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_MSB _u(5) +#define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_LSB _u(5) +#define CLOCKS_WAKE_EN1_CLK_SYS_TIMER_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_TBMAN +#define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_BITS _u(0x00000010) +#define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_MSB _u(4) +#define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_LSB _u(4) +#define CLOCKS_WAKE_EN1_CLK_SYS_TBMAN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_BITS _u(0x00000008) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_MSB _u(3) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_LSB _u(3) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSINFO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_BITS _u(0x00000004) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_MSB _u(2) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_LSB _u(2) +#define CLOCKS_WAKE_EN1_CLK_SYS_SYSCFG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_SRAM5 +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_BITS _u(0x00000002) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_MSB _u(1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_LSB _u(1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_WAKE_EN1_CLK_SYS_SRAM4 +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_RESET _u(0x1) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_BITS _u(0x00000001) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_MSB _u(0) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_LSB _u(0) +#define CLOCKS_WAKE_EN1_CLK_SYS_SRAM4_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_SLEEP_EN0 +// Description : enable clock in sleep mode +#define CLOCKS_SLEEP_EN0_OFFSET _u(0x000000a8) +#define CLOCKS_SLEEP_EN0_BITS _u(0xffffffff) +#define CLOCKS_SLEEP_EN0_RESET _u(0xffffffff) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_BITS _u(0x80000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_MSB _u(31) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_LSB _u(31) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_BITS _u(0x40000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_MSB _u(30) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_LSB _u(30) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_BITS _u(0x20000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_MSB _u(29) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_LSB _u(29) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_BITS _u(0x10000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_MSB _u(28) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_LSB _u(28) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SRAM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SPI1 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_BITS _u(0x08000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_MSB _u(27) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_LSB _u(27) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_PERI_SPI1 +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_BITS _u(0x04000000) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_MSB _u(26) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_LSB _u(26) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SPI0 +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_BITS _u(0x02000000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_MSB _u(25) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_LSB _u(25) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_PERI_SPI0 +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_BITS _u(0x01000000) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_MSB _u(24) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_LSB _u(24) +#define CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_SIO +#define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_BITS _u(0x00800000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_MSB _u(23) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_LSB _u(23) +#define CLOCKS_SLEEP_EN0_CLK_SYS_SIO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_RTC +#define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_BITS _u(0x00400000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_MSB _u(22) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_LSB _u(22) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RTC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_RTC_RTC +#define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_BITS _u(0x00200000) +#define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_MSB _u(21) +#define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_LSB _u(21) +#define CLOCKS_SLEEP_EN0_CLK_RTC_RTC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_ROSC +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_BITS _u(0x00100000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_MSB _u(20) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_LSB _u(20) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROSC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_ROM +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_BITS _u(0x00080000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_MSB _u(19) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_LSB _u(19) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ROM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_RESETS +#define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_BITS _u(0x00040000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_MSB _u(18) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_LSB _u(18) +#define CLOCKS_SLEEP_EN0_CLK_SYS_RESETS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PWM +#define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_BITS _u(0x00020000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_MSB _u(17) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_LSB _u(17) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PWM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PSM +#define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_BITS _u(0x00010000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_MSB _u(16) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_LSB _u(16) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PSM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_BITS _u(0x00008000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_MSB _u(15) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_LSB _u(15) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_USB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_MSB _u(14) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_LSB _u(14) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PLL_SYS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PIO1 +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_BITS _u(0x00002000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_MSB _u(13) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_LSB _u(13) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PIO0 +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_BITS _u(0x00001000) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_MSB _u(12) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_LSB _u(12) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_PADS +#define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_BITS _u(0x00000800) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_MSB _u(11) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_LSB _u(11) +#define CLOCKS_SLEEP_EN0_CLK_SYS_PADS_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET +#define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) +#define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) +#define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_LSB _u(10) +#define CLOCKS_SLEEP_EN0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_JTAG +#define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_BITS _u(0x00000200) +#define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_MSB _u(9) +#define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_LSB _u(9) +#define CLOCKS_SLEEP_EN0_CLK_SYS_JTAG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_IO +#define CLOCKS_SLEEP_EN0_CLK_SYS_IO_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_IO_BITS _u(0x00000100) +#define CLOCKS_SLEEP_EN0_CLK_SYS_IO_MSB _u(8) +#define CLOCKS_SLEEP_EN0_CLK_SYS_IO_LSB _u(8) +#define CLOCKS_SLEEP_EN0_CLK_SYS_IO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_I2C1 +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_BITS _u(0x00000080) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_MSB _u(7) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_LSB _u(7) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_I2C0 +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_BITS _u(0x00000040) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_MSB _u(6) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_LSB _u(6) +#define CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_DMA +#define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_BITS _u(0x00000020) +#define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_MSB _u(5) +#define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_LSB _u(5) +#define CLOCKS_SLEEP_EN0_CLK_SYS_DMA_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_MSB _u(4) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_LSB _u(4) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSFABRIC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_MSB _u(3) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_LSB _u(3) +#define CLOCKS_SLEEP_EN0_CLK_SYS_BUSCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_ADC +#define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_BITS _u(0x00000004) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_MSB _u(2) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_LSB _u(2) +#define CLOCKS_SLEEP_EN0_CLK_SYS_ADC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_ADC_ADC +#define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_BITS _u(0x00000002) +#define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_MSB _u(1) +#define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_LSB _u(1) +#define CLOCKS_SLEEP_EN0_CLK_ADC_ADC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS +#define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_RESET _u(0x1) +#define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_BITS _u(0x00000001) +#define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_MSB _u(0) +#define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_LSB _u(0) +#define CLOCKS_SLEEP_EN0_CLK_SYS_CLOCKS_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_SLEEP_EN1 +// Description : enable clock in sleep mode +#define CLOCKS_SLEEP_EN1_OFFSET _u(0x000000ac) +#define CLOCKS_SLEEP_EN1_BITS _u(0x00007fff) +#define CLOCKS_SLEEP_EN1_RESET _u(0x00007fff) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_XOSC +#define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_BITS _u(0x00004000) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_MSB _u(14) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_LSB _u(14) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XOSC_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_XIP +#define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_BITS _u(0x00002000) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_MSB _u(13) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_LSB _u(13) +#define CLOCKS_SLEEP_EN1_CLK_SYS_XIP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG +#define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) +#define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_MSB _u(12) +#define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_LSB _u(12) +#define CLOCKS_SLEEP_EN1_CLK_SYS_WATCHDOG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL +#define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_BITS _u(0x00000800) +#define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_MSB _u(11) +#define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_LSB _u(11) +#define CLOCKS_SLEEP_EN1_CLK_USB_USBCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL +#define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_BITS _u(0x00000400) +#define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_MSB _u(10) +#define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_LSB _u(10) +#define CLOCKS_SLEEP_EN1_CLK_SYS_USBCTRL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_UART1 +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_BITS _u(0x00000200) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_MSB _u(9) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_LSB _u(9) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_PERI_UART1 +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_BITS _u(0x00000100) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_MSB _u(8) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_LSB _u(8) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_UART0 +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_BITS _u(0x00000080) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_MSB _u(7) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_LSB _u(7) +#define CLOCKS_SLEEP_EN1_CLK_SYS_UART0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_PERI_UART0 +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_BITS _u(0x00000040) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_MSB _u(6) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_LSB _u(6) +#define CLOCKS_SLEEP_EN1_CLK_PERI_UART0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_TIMER +#define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_BITS _u(0x00000020) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_MSB _u(5) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_LSB _u(5) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TIMER_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN +#define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_BITS _u(0x00000010) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_MSB _u(4) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_LSB _u(4) +#define CLOCKS_SLEEP_EN1_CLK_SYS_TBMAN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_BITS _u(0x00000008) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_MSB _u(3) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_LSB _u(3) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSINFO_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_BITS _u(0x00000004) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_MSB _u(2) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_LSB _u(2) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SYSCFG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5 +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_BITS _u(0x00000002) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_MSB _u(1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_LSB _u(1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM5_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4 +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_RESET _u(0x1) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_BITS _u(0x00000001) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_MSB _u(0) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_LSB _u(0) +#define CLOCKS_SLEEP_EN1_CLK_SYS_SRAM4_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_ENABLED0 +// Description : indicates the state of the clock enable +#define CLOCKS_ENABLED0_OFFSET _u(0x000000b0) +#define CLOCKS_ENABLED0_BITS _u(0xffffffff) +#define CLOCKS_ENABLED0_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SRAM3 +#define CLOCKS_ENABLED0_CLK_SYS_SRAM3_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM3_BITS _u(0x80000000) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM3_MSB _u(31) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM3_LSB _u(31) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SRAM2 +#define CLOCKS_ENABLED0_CLK_SYS_SRAM2_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM2_BITS _u(0x40000000) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM2_MSB _u(30) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM2_LSB _u(30) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SRAM1 +#define CLOCKS_ENABLED0_CLK_SYS_SRAM1_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM1_BITS _u(0x20000000) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM1_MSB _u(29) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM1_LSB _u(29) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SRAM0 +#define CLOCKS_ENABLED0_CLK_SYS_SRAM0_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM0_BITS _u(0x10000000) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM0_MSB _u(28) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM0_LSB _u(28) +#define CLOCKS_ENABLED0_CLK_SYS_SRAM0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SPI1 +#define CLOCKS_ENABLED0_CLK_SYS_SPI1_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SPI1_BITS _u(0x08000000) +#define CLOCKS_ENABLED0_CLK_SYS_SPI1_MSB _u(27) +#define CLOCKS_ENABLED0_CLK_SYS_SPI1_LSB _u(27) +#define CLOCKS_ENABLED0_CLK_SYS_SPI1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_PERI_SPI1 +#define CLOCKS_ENABLED0_CLK_PERI_SPI1_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_PERI_SPI1_BITS _u(0x04000000) +#define CLOCKS_ENABLED0_CLK_PERI_SPI1_MSB _u(26) +#define CLOCKS_ENABLED0_CLK_PERI_SPI1_LSB _u(26) +#define CLOCKS_ENABLED0_CLK_PERI_SPI1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SPI0 +#define CLOCKS_ENABLED0_CLK_SYS_SPI0_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SPI0_BITS _u(0x02000000) +#define CLOCKS_ENABLED0_CLK_SYS_SPI0_MSB _u(25) +#define CLOCKS_ENABLED0_CLK_SYS_SPI0_LSB _u(25) +#define CLOCKS_ENABLED0_CLK_SYS_SPI0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_PERI_SPI0 +#define CLOCKS_ENABLED0_CLK_PERI_SPI0_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_PERI_SPI0_BITS _u(0x01000000) +#define CLOCKS_ENABLED0_CLK_PERI_SPI0_MSB _u(24) +#define CLOCKS_ENABLED0_CLK_PERI_SPI0_LSB _u(24) +#define CLOCKS_ENABLED0_CLK_PERI_SPI0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_SIO +#define CLOCKS_ENABLED0_CLK_SYS_SIO_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_SIO_BITS _u(0x00800000) +#define CLOCKS_ENABLED0_CLK_SYS_SIO_MSB _u(23) +#define CLOCKS_ENABLED0_CLK_SYS_SIO_LSB _u(23) +#define CLOCKS_ENABLED0_CLK_SYS_SIO_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_RTC +#define CLOCKS_ENABLED0_CLK_SYS_RTC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_RTC_BITS _u(0x00400000) +#define CLOCKS_ENABLED0_CLK_SYS_RTC_MSB _u(22) +#define CLOCKS_ENABLED0_CLK_SYS_RTC_LSB _u(22) +#define CLOCKS_ENABLED0_CLK_SYS_RTC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_RTC_RTC +#define CLOCKS_ENABLED0_CLK_RTC_RTC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_RTC_RTC_BITS _u(0x00200000) +#define CLOCKS_ENABLED0_CLK_RTC_RTC_MSB _u(21) +#define CLOCKS_ENABLED0_CLK_RTC_RTC_LSB _u(21) +#define CLOCKS_ENABLED0_CLK_RTC_RTC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_ROSC +#define CLOCKS_ENABLED0_CLK_SYS_ROSC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_ROSC_BITS _u(0x00100000) +#define CLOCKS_ENABLED0_CLK_SYS_ROSC_MSB _u(20) +#define CLOCKS_ENABLED0_CLK_SYS_ROSC_LSB _u(20) +#define CLOCKS_ENABLED0_CLK_SYS_ROSC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_ROM +#define CLOCKS_ENABLED0_CLK_SYS_ROM_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_ROM_BITS _u(0x00080000) +#define CLOCKS_ENABLED0_CLK_SYS_ROM_MSB _u(19) +#define CLOCKS_ENABLED0_CLK_SYS_ROM_LSB _u(19) +#define CLOCKS_ENABLED0_CLK_SYS_ROM_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_RESETS +#define CLOCKS_ENABLED0_CLK_SYS_RESETS_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_RESETS_BITS _u(0x00040000) +#define CLOCKS_ENABLED0_CLK_SYS_RESETS_MSB _u(18) +#define CLOCKS_ENABLED0_CLK_SYS_RESETS_LSB _u(18) +#define CLOCKS_ENABLED0_CLK_SYS_RESETS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PWM +#define CLOCKS_ENABLED0_CLK_SYS_PWM_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PWM_BITS _u(0x00020000) +#define CLOCKS_ENABLED0_CLK_SYS_PWM_MSB _u(17) +#define CLOCKS_ENABLED0_CLK_SYS_PWM_LSB _u(17) +#define CLOCKS_ENABLED0_CLK_SYS_PWM_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PSM +#define CLOCKS_ENABLED0_CLK_SYS_PSM_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PSM_BITS _u(0x00010000) +#define CLOCKS_ENABLED0_CLK_SYS_PSM_MSB _u(16) +#define CLOCKS_ENABLED0_CLK_SYS_PSM_LSB _u(16) +#define CLOCKS_ENABLED0_CLK_SYS_PSM_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PLL_USB +#define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_BITS _u(0x00008000) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_MSB _u(15) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_LSB _u(15) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_USB_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PLL_SYS +#define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_BITS _u(0x00004000) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_MSB _u(14) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_LSB _u(14) +#define CLOCKS_ENABLED0_CLK_SYS_PLL_SYS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PIO1 +#define CLOCKS_ENABLED0_CLK_SYS_PIO1_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PIO1_BITS _u(0x00002000) +#define CLOCKS_ENABLED0_CLK_SYS_PIO1_MSB _u(13) +#define CLOCKS_ENABLED0_CLK_SYS_PIO1_LSB _u(13) +#define CLOCKS_ENABLED0_CLK_SYS_PIO1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PIO0 +#define CLOCKS_ENABLED0_CLK_SYS_PIO0_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PIO0_BITS _u(0x00001000) +#define CLOCKS_ENABLED0_CLK_SYS_PIO0_MSB _u(12) +#define CLOCKS_ENABLED0_CLK_SYS_PIO0_LSB _u(12) +#define CLOCKS_ENABLED0_CLK_SYS_PIO0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_PADS +#define CLOCKS_ENABLED0_CLK_SYS_PADS_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_PADS_BITS _u(0x00000800) +#define CLOCKS_ENABLED0_CLK_SYS_PADS_MSB _u(11) +#define CLOCKS_ENABLED0_CLK_SYS_PADS_LSB _u(11) +#define CLOCKS_ENABLED0_CLK_SYS_PADS_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET +#define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_BITS _u(0x00000400) +#define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_MSB _u(10) +#define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_LSB _u(10) +#define CLOCKS_ENABLED0_CLK_SYS_VREG_AND_CHIP_RESET_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_JTAG +#define CLOCKS_ENABLED0_CLK_SYS_JTAG_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_JTAG_BITS _u(0x00000200) +#define CLOCKS_ENABLED0_CLK_SYS_JTAG_MSB _u(9) +#define CLOCKS_ENABLED0_CLK_SYS_JTAG_LSB _u(9) +#define CLOCKS_ENABLED0_CLK_SYS_JTAG_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_IO +#define CLOCKS_ENABLED0_CLK_SYS_IO_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_IO_BITS _u(0x00000100) +#define CLOCKS_ENABLED0_CLK_SYS_IO_MSB _u(8) +#define CLOCKS_ENABLED0_CLK_SYS_IO_LSB _u(8) +#define CLOCKS_ENABLED0_CLK_SYS_IO_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_I2C1 +#define CLOCKS_ENABLED0_CLK_SYS_I2C1_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_I2C1_BITS _u(0x00000080) +#define CLOCKS_ENABLED0_CLK_SYS_I2C1_MSB _u(7) +#define CLOCKS_ENABLED0_CLK_SYS_I2C1_LSB _u(7) +#define CLOCKS_ENABLED0_CLK_SYS_I2C1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_I2C0 +#define CLOCKS_ENABLED0_CLK_SYS_I2C0_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_I2C0_BITS _u(0x00000040) +#define CLOCKS_ENABLED0_CLK_SYS_I2C0_MSB _u(6) +#define CLOCKS_ENABLED0_CLK_SYS_I2C0_LSB _u(6) +#define CLOCKS_ENABLED0_CLK_SYS_I2C0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_DMA +#define CLOCKS_ENABLED0_CLK_SYS_DMA_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_DMA_BITS _u(0x00000020) +#define CLOCKS_ENABLED0_CLK_SYS_DMA_MSB _u(5) +#define CLOCKS_ENABLED0_CLK_SYS_DMA_LSB _u(5) +#define CLOCKS_ENABLED0_CLK_SYS_DMA_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC +#define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_BITS _u(0x00000010) +#define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_MSB _u(4) +#define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_LSB _u(4) +#define CLOCKS_ENABLED0_CLK_SYS_BUSFABRIC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_BUSCTRL +#define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_BITS _u(0x00000008) +#define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_MSB _u(3) +#define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_LSB _u(3) +#define CLOCKS_ENABLED0_CLK_SYS_BUSCTRL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_ADC +#define CLOCKS_ENABLED0_CLK_SYS_ADC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_ADC_BITS _u(0x00000004) +#define CLOCKS_ENABLED0_CLK_SYS_ADC_MSB _u(2) +#define CLOCKS_ENABLED0_CLK_SYS_ADC_LSB _u(2) +#define CLOCKS_ENABLED0_CLK_SYS_ADC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_ADC_ADC +#define CLOCKS_ENABLED0_CLK_ADC_ADC_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_ADC_ADC_BITS _u(0x00000002) +#define CLOCKS_ENABLED0_CLK_ADC_ADC_MSB _u(1) +#define CLOCKS_ENABLED0_CLK_ADC_ADC_LSB _u(1) +#define CLOCKS_ENABLED0_CLK_ADC_ADC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED0_CLK_SYS_CLOCKS +#define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_RESET _u(0x0) +#define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_BITS _u(0x00000001) +#define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_MSB _u(0) +#define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_LSB _u(0) +#define CLOCKS_ENABLED0_CLK_SYS_CLOCKS_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_ENABLED1 +// Description : indicates the state of the clock enable +#define CLOCKS_ENABLED1_OFFSET _u(0x000000b4) +#define CLOCKS_ENABLED1_BITS _u(0x00007fff) +#define CLOCKS_ENABLED1_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_XOSC +#define CLOCKS_ENABLED1_CLK_SYS_XOSC_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_XOSC_BITS _u(0x00004000) +#define CLOCKS_ENABLED1_CLK_SYS_XOSC_MSB _u(14) +#define CLOCKS_ENABLED1_CLK_SYS_XOSC_LSB _u(14) +#define CLOCKS_ENABLED1_CLK_SYS_XOSC_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_XIP +#define CLOCKS_ENABLED1_CLK_SYS_XIP_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_XIP_BITS _u(0x00002000) +#define CLOCKS_ENABLED1_CLK_SYS_XIP_MSB _u(13) +#define CLOCKS_ENABLED1_CLK_SYS_XIP_LSB _u(13) +#define CLOCKS_ENABLED1_CLK_SYS_XIP_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_WATCHDOG +#define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_BITS _u(0x00001000) +#define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_MSB _u(12) +#define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_LSB _u(12) +#define CLOCKS_ENABLED1_CLK_SYS_WATCHDOG_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_USB_USBCTRL +#define CLOCKS_ENABLED1_CLK_USB_USBCTRL_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_USB_USBCTRL_BITS _u(0x00000800) +#define CLOCKS_ENABLED1_CLK_USB_USBCTRL_MSB _u(11) +#define CLOCKS_ENABLED1_CLK_USB_USBCTRL_LSB _u(11) +#define CLOCKS_ENABLED1_CLK_USB_USBCTRL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_USBCTRL +#define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_BITS _u(0x00000400) +#define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_MSB _u(10) +#define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_LSB _u(10) +#define CLOCKS_ENABLED1_CLK_SYS_USBCTRL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_UART1 +#define CLOCKS_ENABLED1_CLK_SYS_UART1_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_UART1_BITS _u(0x00000200) +#define CLOCKS_ENABLED1_CLK_SYS_UART1_MSB _u(9) +#define CLOCKS_ENABLED1_CLK_SYS_UART1_LSB _u(9) +#define CLOCKS_ENABLED1_CLK_SYS_UART1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_PERI_UART1 +#define CLOCKS_ENABLED1_CLK_PERI_UART1_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_PERI_UART1_BITS _u(0x00000100) +#define CLOCKS_ENABLED1_CLK_PERI_UART1_MSB _u(8) +#define CLOCKS_ENABLED1_CLK_PERI_UART1_LSB _u(8) +#define CLOCKS_ENABLED1_CLK_PERI_UART1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_UART0 +#define CLOCKS_ENABLED1_CLK_SYS_UART0_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_UART0_BITS _u(0x00000080) +#define CLOCKS_ENABLED1_CLK_SYS_UART0_MSB _u(7) +#define CLOCKS_ENABLED1_CLK_SYS_UART0_LSB _u(7) +#define CLOCKS_ENABLED1_CLK_SYS_UART0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_PERI_UART0 +#define CLOCKS_ENABLED1_CLK_PERI_UART0_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_PERI_UART0_BITS _u(0x00000040) +#define CLOCKS_ENABLED1_CLK_PERI_UART0_MSB _u(6) +#define CLOCKS_ENABLED1_CLK_PERI_UART0_LSB _u(6) +#define CLOCKS_ENABLED1_CLK_PERI_UART0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_TIMER +#define CLOCKS_ENABLED1_CLK_SYS_TIMER_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_TIMER_BITS _u(0x00000020) +#define CLOCKS_ENABLED1_CLK_SYS_TIMER_MSB _u(5) +#define CLOCKS_ENABLED1_CLK_SYS_TIMER_LSB _u(5) +#define CLOCKS_ENABLED1_CLK_SYS_TIMER_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_TBMAN +#define CLOCKS_ENABLED1_CLK_SYS_TBMAN_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_TBMAN_BITS _u(0x00000010) +#define CLOCKS_ENABLED1_CLK_SYS_TBMAN_MSB _u(4) +#define CLOCKS_ENABLED1_CLK_SYS_TBMAN_LSB _u(4) +#define CLOCKS_ENABLED1_CLK_SYS_TBMAN_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_SYSINFO +#define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_BITS _u(0x00000008) +#define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_MSB _u(3) +#define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_LSB _u(3) +#define CLOCKS_ENABLED1_CLK_SYS_SYSINFO_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_SYSCFG +#define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_BITS _u(0x00000004) +#define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_MSB _u(2) +#define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_LSB _u(2) +#define CLOCKS_ENABLED1_CLK_SYS_SYSCFG_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_SRAM5 +#define CLOCKS_ENABLED1_CLK_SYS_SRAM5_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM5_BITS _u(0x00000002) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM5_MSB _u(1) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM5_LSB _u(1) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM5_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : CLOCKS_ENABLED1_CLK_SYS_SRAM4 +#define CLOCKS_ENABLED1_CLK_SYS_SRAM4_RESET _u(0x0) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM4_BITS _u(0x00000001) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM4_MSB _u(0) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM4_LSB _u(0) +#define CLOCKS_ENABLED1_CLK_SYS_SRAM4_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_INTR +// Description : Raw Interrupts +#define CLOCKS_INTR_OFFSET _u(0x000000b8) +#define CLOCKS_INTR_BITS _u(0x00000001) +#define CLOCKS_INTR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_INTR_CLK_SYS_RESUS +#define CLOCKS_INTR_CLK_SYS_RESUS_RESET _u(0x0) +#define CLOCKS_INTR_CLK_SYS_RESUS_BITS _u(0x00000001) +#define CLOCKS_INTR_CLK_SYS_RESUS_MSB _u(0) +#define CLOCKS_INTR_CLK_SYS_RESUS_LSB _u(0) +#define CLOCKS_INTR_CLK_SYS_RESUS_ACCESS "RO" +// ============================================================================= +// Register : CLOCKS_INTE +// Description : Interrupt Enable +#define CLOCKS_INTE_OFFSET _u(0x000000bc) +#define CLOCKS_INTE_BITS _u(0x00000001) +#define CLOCKS_INTE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_INTE_CLK_SYS_RESUS +#define CLOCKS_INTE_CLK_SYS_RESUS_RESET _u(0x0) +#define CLOCKS_INTE_CLK_SYS_RESUS_BITS _u(0x00000001) +#define CLOCKS_INTE_CLK_SYS_RESUS_MSB _u(0) +#define CLOCKS_INTE_CLK_SYS_RESUS_LSB _u(0) +#define CLOCKS_INTE_CLK_SYS_RESUS_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_INTF +// Description : Interrupt Force +#define CLOCKS_INTF_OFFSET _u(0x000000c0) +#define CLOCKS_INTF_BITS _u(0x00000001) +#define CLOCKS_INTF_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_INTF_CLK_SYS_RESUS +#define CLOCKS_INTF_CLK_SYS_RESUS_RESET _u(0x0) +#define CLOCKS_INTF_CLK_SYS_RESUS_BITS _u(0x00000001) +#define CLOCKS_INTF_CLK_SYS_RESUS_MSB _u(0) +#define CLOCKS_INTF_CLK_SYS_RESUS_LSB _u(0) +#define CLOCKS_INTF_CLK_SYS_RESUS_ACCESS "RW" +// ============================================================================= +// Register : CLOCKS_INTS +// Description : Interrupt status after masking & forcing +#define CLOCKS_INTS_OFFSET _u(0x000000c4) +#define CLOCKS_INTS_BITS _u(0x00000001) +#define CLOCKS_INTS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : CLOCKS_INTS_CLK_SYS_RESUS +#define CLOCKS_INTS_CLK_SYS_RESUS_RESET _u(0x0) +#define CLOCKS_INTS_CLK_SYS_RESUS_BITS _u(0x00000001) +#define CLOCKS_INTS_CLK_SYS_RESUS_MSB _u(0) +#define CLOCKS_INTS_CLK_SYS_RESUS_LSB _u(0) +#define CLOCKS_INTS_CLK_SYS_RESUS_ACCESS "RO" +// ============================================================================= +#endif // _HARDWARE_REGS_CLOCKS_H + |