diff options
Diffstat (limited to 'lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h')
| -rw-r--r-- | lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h | 2302 |
1 files changed, 2302 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h b/lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h new file mode 100644 index 00000000..04c5e397 --- /dev/null +++ b/lib/pico-sdk/rp2040/hardware/regs/pads_bank0.h @@ -0,0 +1,2302 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : PADS_BANK0 +// Version : 1 +// Bus type : apb +// ============================================================================= +#ifndef _HARDWARE_REGS_PADS_BANK0_H +#define _HARDWARE_REGS_PADS_BANK0_H +// ============================================================================= +// Register : PADS_BANK0_VOLTAGE_SELECT +// Description : Voltage select. Per bank control +// 0x0 -> Set voltage to 3.3V (DVDD >= 2V5) +// 0x1 -> Set voltage to 1.8V (DVDD <= 1V8) +#define PADS_BANK0_VOLTAGE_SELECT_OFFSET _u(0x00000000) +#define PADS_BANK0_VOLTAGE_SELECT_BITS _u(0x00000001) +#define PADS_BANK0_VOLTAGE_SELECT_RESET _u(0x00000000) +#define PADS_BANK0_VOLTAGE_SELECT_MSB _u(0) +#define PADS_BANK0_VOLTAGE_SELECT_LSB _u(0) +#define PADS_BANK0_VOLTAGE_SELECT_ACCESS "RW" +#define PADS_BANK0_VOLTAGE_SELECT_VALUE_3V3 _u(0x0) +#define PADS_BANK0_VOLTAGE_SELECT_VALUE_1V8 _u(0x1) +// ============================================================================= +// Register : PADS_BANK0_GPIO0 +// Description : Pad control register +#define PADS_BANK0_GPIO0_OFFSET _u(0x00000004) +#define PADS_BANK0_GPIO0_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO0_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO0_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO0_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO0_OD_MSB _u(7) +#define PADS_BANK0_GPIO0_OD_LSB _u(7) +#define PADS_BANK0_GPIO0_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_IE +// Description : Input enable +#define PADS_BANK0_GPIO0_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO0_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO0_IE_MSB _u(6) +#define PADS_BANK0_GPIO0_IE_LSB _u(6) +#define PADS_BANK0_GPIO0_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO0_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO0_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO0_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO0_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO0_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO0_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO0_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO0_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO0_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO0_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO0_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO0_PUE_MSB _u(3) +#define PADS_BANK0_GPIO0_PUE_LSB _u(3) +#define PADS_BANK0_GPIO0_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO0_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO0_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO0_PDE_MSB _u(2) +#define PADS_BANK0_GPIO0_PDE_LSB _u(2) +#define PADS_BANK0_GPIO0_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO0_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO0_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO0_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO0_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO0_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO0_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO0_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO0_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO0_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO0_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO0_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO1 +// Description : Pad control register +#define PADS_BANK0_GPIO1_OFFSET _u(0x00000008) +#define PADS_BANK0_GPIO1_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO1_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO1_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO1_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO1_OD_MSB _u(7) +#define PADS_BANK0_GPIO1_OD_LSB _u(7) +#define PADS_BANK0_GPIO1_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_IE +// Description : Input enable +#define PADS_BANK0_GPIO1_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO1_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO1_IE_MSB _u(6) +#define PADS_BANK0_GPIO1_IE_LSB _u(6) +#define PADS_BANK0_GPIO1_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO1_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO1_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO1_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO1_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO1_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO1_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO1_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO1_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO1_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO1_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO1_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO1_PUE_MSB _u(3) +#define PADS_BANK0_GPIO1_PUE_LSB _u(3) +#define PADS_BANK0_GPIO1_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO1_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO1_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO1_PDE_MSB _u(2) +#define PADS_BANK0_GPIO1_PDE_LSB _u(2) +#define PADS_BANK0_GPIO1_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO1_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO1_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO1_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO1_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO1_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO1_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO1_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO1_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO1_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO1_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO1_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO2 +// Description : Pad control register +#define PADS_BANK0_GPIO2_OFFSET _u(0x0000000c) +#define PADS_BANK0_GPIO2_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO2_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO2_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO2_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO2_OD_MSB _u(7) +#define PADS_BANK0_GPIO2_OD_LSB _u(7) +#define PADS_BANK0_GPIO2_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_IE +// Description : Input enable +#define PADS_BANK0_GPIO2_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO2_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO2_IE_MSB _u(6) +#define PADS_BANK0_GPIO2_IE_LSB _u(6) +#define PADS_BANK0_GPIO2_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO2_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO2_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO2_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO2_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO2_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO2_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO2_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO2_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO2_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO2_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO2_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO2_PUE_MSB _u(3) +#define PADS_BANK0_GPIO2_PUE_LSB _u(3) +#define PADS_BANK0_GPIO2_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO2_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO2_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO2_PDE_MSB _u(2) +#define PADS_BANK0_GPIO2_PDE_LSB _u(2) +#define PADS_BANK0_GPIO2_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO2_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO2_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO2_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO2_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO2_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO2_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO2_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO2_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO2_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO2_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO2_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO3 +// Description : Pad control register +#define PADS_BANK0_GPIO3_OFFSET _u(0x00000010) +#define PADS_BANK0_GPIO3_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO3_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO3_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO3_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO3_OD_MSB _u(7) +#define PADS_BANK0_GPIO3_OD_LSB _u(7) +#define PADS_BANK0_GPIO3_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_IE +// Description : Input enable +#define PADS_BANK0_GPIO3_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO3_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO3_IE_MSB _u(6) +#define PADS_BANK0_GPIO3_IE_LSB _u(6) +#define PADS_BANK0_GPIO3_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO3_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO3_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO3_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO3_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO3_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO3_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO3_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO3_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO3_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO3_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO3_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO3_PUE_MSB _u(3) +#define PADS_BANK0_GPIO3_PUE_LSB _u(3) +#define PADS_BANK0_GPIO3_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO3_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO3_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO3_PDE_MSB _u(2) +#define PADS_BANK0_GPIO3_PDE_LSB _u(2) +#define PADS_BANK0_GPIO3_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO3_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO3_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO3_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO3_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO3_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO3_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO3_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO3_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO3_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO3_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO3_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO4 +// Description : Pad control register +#define PADS_BANK0_GPIO4_OFFSET _u(0x00000014) +#define PADS_BANK0_GPIO4_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO4_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO4_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO4_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO4_OD_MSB _u(7) +#define PADS_BANK0_GPIO4_OD_LSB _u(7) +#define PADS_BANK0_GPIO4_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_IE +// Description : Input enable +#define PADS_BANK0_GPIO4_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO4_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO4_IE_MSB _u(6) +#define PADS_BANK0_GPIO4_IE_LSB _u(6) +#define PADS_BANK0_GPIO4_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO4_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO4_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO4_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO4_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO4_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO4_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO4_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO4_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO4_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO4_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO4_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO4_PUE_MSB _u(3) +#define PADS_BANK0_GPIO4_PUE_LSB _u(3) +#define PADS_BANK0_GPIO4_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO4_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO4_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO4_PDE_MSB _u(2) +#define PADS_BANK0_GPIO4_PDE_LSB _u(2) +#define PADS_BANK0_GPIO4_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO4_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO4_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO4_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO4_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO4_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO4_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO4_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO4_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO4_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO4_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO4_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO5 +// Description : Pad control register +#define PADS_BANK0_GPIO5_OFFSET _u(0x00000018) +#define PADS_BANK0_GPIO5_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO5_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO5_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO5_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO5_OD_MSB _u(7) +#define PADS_BANK0_GPIO5_OD_LSB _u(7) +#define PADS_BANK0_GPIO5_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_IE +// Description : Input enable +#define PADS_BANK0_GPIO5_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO5_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO5_IE_MSB _u(6) +#define PADS_BANK0_GPIO5_IE_LSB _u(6) +#define PADS_BANK0_GPIO5_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO5_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO5_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO5_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO5_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO5_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO5_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO5_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO5_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO5_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO5_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO5_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO5_PUE_MSB _u(3) +#define PADS_BANK0_GPIO5_PUE_LSB _u(3) +#define PADS_BANK0_GPIO5_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO5_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO5_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO5_PDE_MSB _u(2) +#define PADS_BANK0_GPIO5_PDE_LSB _u(2) +#define PADS_BANK0_GPIO5_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO5_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO5_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO5_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO5_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO5_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO5_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO5_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO5_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO5_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO5_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO5_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO6 +// Description : Pad control register +#define PADS_BANK0_GPIO6_OFFSET _u(0x0000001c) +#define PADS_BANK0_GPIO6_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO6_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO6_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO6_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO6_OD_MSB _u(7) +#define PADS_BANK0_GPIO6_OD_LSB _u(7) +#define PADS_BANK0_GPIO6_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_IE +// Description : Input enable +#define PADS_BANK0_GPIO6_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO6_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO6_IE_MSB _u(6) +#define PADS_BANK0_GPIO6_IE_LSB _u(6) +#define PADS_BANK0_GPIO6_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO6_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO6_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO6_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO6_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO6_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO6_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO6_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO6_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO6_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO6_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO6_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO6_PUE_MSB _u(3) +#define PADS_BANK0_GPIO6_PUE_LSB _u(3) +#define PADS_BANK0_GPIO6_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO6_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO6_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO6_PDE_MSB _u(2) +#define PADS_BANK0_GPIO6_PDE_LSB _u(2) +#define PADS_BANK0_GPIO6_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO6_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO6_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO6_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO6_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO6_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO6_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO6_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO6_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO6_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO6_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO6_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO7 +// Description : Pad control register +#define PADS_BANK0_GPIO7_OFFSET _u(0x00000020) +#define PADS_BANK0_GPIO7_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO7_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO7_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO7_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO7_OD_MSB _u(7) +#define PADS_BANK0_GPIO7_OD_LSB _u(7) +#define PADS_BANK0_GPIO7_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_IE +// Description : Input enable +#define PADS_BANK0_GPIO7_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO7_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO7_IE_MSB _u(6) +#define PADS_BANK0_GPIO7_IE_LSB _u(6) +#define PADS_BANK0_GPIO7_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO7_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO7_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO7_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO7_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO7_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO7_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO7_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO7_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO7_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO7_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO7_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO7_PUE_MSB _u(3) +#define PADS_BANK0_GPIO7_PUE_LSB _u(3) +#define PADS_BANK0_GPIO7_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO7_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO7_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO7_PDE_MSB _u(2) +#define PADS_BANK0_GPIO7_PDE_LSB _u(2) +#define PADS_BANK0_GPIO7_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO7_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO7_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO7_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO7_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO7_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO7_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO7_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO7_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO7_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO7_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO7_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO8 +// Description : Pad control register +#define PADS_BANK0_GPIO8_OFFSET _u(0x00000024) +#define PADS_BANK0_GPIO8_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO8_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO8_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO8_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO8_OD_MSB _u(7) +#define PADS_BANK0_GPIO8_OD_LSB _u(7) +#define PADS_BANK0_GPIO8_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_IE +// Description : Input enable +#define PADS_BANK0_GPIO8_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO8_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO8_IE_MSB _u(6) +#define PADS_BANK0_GPIO8_IE_LSB _u(6) +#define PADS_BANK0_GPIO8_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO8_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO8_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO8_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO8_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO8_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO8_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO8_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO8_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO8_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO8_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO8_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO8_PUE_MSB _u(3) +#define PADS_BANK0_GPIO8_PUE_LSB _u(3) +#define PADS_BANK0_GPIO8_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO8_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO8_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO8_PDE_MSB _u(2) +#define PADS_BANK0_GPIO8_PDE_LSB _u(2) +#define PADS_BANK0_GPIO8_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO8_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO8_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO8_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO8_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO8_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO8_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO8_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO8_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO8_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO8_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO8_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO9 +// Description : Pad control register +#define PADS_BANK0_GPIO9_OFFSET _u(0x00000028) +#define PADS_BANK0_GPIO9_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO9_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO9_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO9_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO9_OD_MSB _u(7) +#define PADS_BANK0_GPIO9_OD_LSB _u(7) +#define PADS_BANK0_GPIO9_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_IE +// Description : Input enable +#define PADS_BANK0_GPIO9_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO9_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO9_IE_MSB _u(6) +#define PADS_BANK0_GPIO9_IE_LSB _u(6) +#define PADS_BANK0_GPIO9_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO9_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO9_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO9_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO9_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO9_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO9_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO9_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO9_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO9_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO9_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO9_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO9_PUE_MSB _u(3) +#define PADS_BANK0_GPIO9_PUE_LSB _u(3) +#define PADS_BANK0_GPIO9_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO9_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO9_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO9_PDE_MSB _u(2) +#define PADS_BANK0_GPIO9_PDE_LSB _u(2) +#define PADS_BANK0_GPIO9_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO9_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO9_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO9_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO9_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO9_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO9_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO9_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO9_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO9_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO9_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO9_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO10 +// Description : Pad control register +#define PADS_BANK0_GPIO10_OFFSET _u(0x0000002c) +#define PADS_BANK0_GPIO10_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO10_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO10_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO10_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO10_OD_MSB _u(7) +#define PADS_BANK0_GPIO10_OD_LSB _u(7) +#define PADS_BANK0_GPIO10_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_IE +// Description : Input enable +#define PADS_BANK0_GPIO10_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO10_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO10_IE_MSB _u(6) +#define PADS_BANK0_GPIO10_IE_LSB _u(6) +#define PADS_BANK0_GPIO10_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO10_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO10_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO10_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO10_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO10_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO10_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO10_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO10_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO10_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO10_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO10_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO10_PUE_MSB _u(3) +#define PADS_BANK0_GPIO10_PUE_LSB _u(3) +#define PADS_BANK0_GPIO10_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO10_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO10_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO10_PDE_MSB _u(2) +#define PADS_BANK0_GPIO10_PDE_LSB _u(2) +#define PADS_BANK0_GPIO10_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO10_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO10_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO10_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO10_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO10_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO10_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO10_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO10_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO10_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO10_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO10_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO11 +// Description : Pad control register +#define PADS_BANK0_GPIO11_OFFSET _u(0x00000030) +#define PADS_BANK0_GPIO11_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO11_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO11_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO11_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO11_OD_MSB _u(7) +#define PADS_BANK0_GPIO11_OD_LSB _u(7) +#define PADS_BANK0_GPIO11_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_IE +// Description : Input enable +#define PADS_BANK0_GPIO11_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO11_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO11_IE_MSB _u(6) +#define PADS_BANK0_GPIO11_IE_LSB _u(6) +#define PADS_BANK0_GPIO11_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO11_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO11_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO11_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO11_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO11_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO11_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO11_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO11_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO11_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO11_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO11_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO11_PUE_MSB _u(3) +#define PADS_BANK0_GPIO11_PUE_LSB _u(3) +#define PADS_BANK0_GPIO11_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO11_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO11_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO11_PDE_MSB _u(2) +#define PADS_BANK0_GPIO11_PDE_LSB _u(2) +#define PADS_BANK0_GPIO11_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO11_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO11_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO11_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO11_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO11_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO11_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO11_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO11_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO11_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO11_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO11_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO12 +// Description : Pad control register +#define PADS_BANK0_GPIO12_OFFSET _u(0x00000034) +#define PADS_BANK0_GPIO12_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO12_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO12_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO12_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO12_OD_MSB _u(7) +#define PADS_BANK0_GPIO12_OD_LSB _u(7) +#define PADS_BANK0_GPIO12_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_IE +// Description : Input enable +#define PADS_BANK0_GPIO12_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO12_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO12_IE_MSB _u(6) +#define PADS_BANK0_GPIO12_IE_LSB _u(6) +#define PADS_BANK0_GPIO12_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO12_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO12_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO12_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO12_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO12_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO12_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO12_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO12_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO12_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO12_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO12_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO12_PUE_MSB _u(3) +#define PADS_BANK0_GPIO12_PUE_LSB _u(3) +#define PADS_BANK0_GPIO12_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO12_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO12_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO12_PDE_MSB _u(2) +#define PADS_BANK0_GPIO12_PDE_LSB _u(2) +#define PADS_BANK0_GPIO12_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO12_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO12_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO12_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO12_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO12_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO12_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO12_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO12_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO12_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO12_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO12_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO13 +// Description : Pad control register +#define PADS_BANK0_GPIO13_OFFSET _u(0x00000038) +#define PADS_BANK0_GPIO13_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO13_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO13_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO13_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO13_OD_MSB _u(7) +#define PADS_BANK0_GPIO13_OD_LSB _u(7) +#define PADS_BANK0_GPIO13_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_IE +// Description : Input enable +#define PADS_BANK0_GPIO13_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO13_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO13_IE_MSB _u(6) +#define PADS_BANK0_GPIO13_IE_LSB _u(6) +#define PADS_BANK0_GPIO13_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO13_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO13_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO13_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO13_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO13_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO13_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO13_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO13_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO13_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO13_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO13_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO13_PUE_MSB _u(3) +#define PADS_BANK0_GPIO13_PUE_LSB _u(3) +#define PADS_BANK0_GPIO13_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO13_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO13_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO13_PDE_MSB _u(2) +#define PADS_BANK0_GPIO13_PDE_LSB _u(2) +#define PADS_BANK0_GPIO13_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO13_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO13_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO13_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO13_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO13_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO13_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO13_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO13_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO13_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO13_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO13_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO14 +// Description : Pad control register +#define PADS_BANK0_GPIO14_OFFSET _u(0x0000003c) +#define PADS_BANK0_GPIO14_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO14_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO14_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO14_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO14_OD_MSB _u(7) +#define PADS_BANK0_GPIO14_OD_LSB _u(7) +#define PADS_BANK0_GPIO14_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_IE +// Description : Input enable +#define PADS_BANK0_GPIO14_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO14_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO14_IE_MSB _u(6) +#define PADS_BANK0_GPIO14_IE_LSB _u(6) +#define PADS_BANK0_GPIO14_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO14_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO14_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO14_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO14_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO14_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO14_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO14_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO14_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO14_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO14_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO14_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO14_PUE_MSB _u(3) +#define PADS_BANK0_GPIO14_PUE_LSB _u(3) +#define PADS_BANK0_GPIO14_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO14_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO14_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO14_PDE_MSB _u(2) +#define PADS_BANK0_GPIO14_PDE_LSB _u(2) +#define PADS_BANK0_GPIO14_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO14_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO14_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO14_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO14_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO14_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO14_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO14_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO14_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO14_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO14_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO14_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO15 +// Description : Pad control register +#define PADS_BANK0_GPIO15_OFFSET _u(0x00000040) +#define PADS_BANK0_GPIO15_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO15_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO15_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO15_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO15_OD_MSB _u(7) +#define PADS_BANK0_GPIO15_OD_LSB _u(7) +#define PADS_BANK0_GPIO15_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_IE +// Description : Input enable +#define PADS_BANK0_GPIO15_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO15_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO15_IE_MSB _u(6) +#define PADS_BANK0_GPIO15_IE_LSB _u(6) +#define PADS_BANK0_GPIO15_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO15_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO15_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO15_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO15_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO15_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO15_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO15_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO15_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO15_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO15_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO15_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO15_PUE_MSB _u(3) +#define PADS_BANK0_GPIO15_PUE_LSB _u(3) +#define PADS_BANK0_GPIO15_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO15_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO15_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO15_PDE_MSB _u(2) +#define PADS_BANK0_GPIO15_PDE_LSB _u(2) +#define PADS_BANK0_GPIO15_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO15_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO15_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO15_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO15_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO15_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO15_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO15_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO15_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO15_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO15_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO15_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO16 +// Description : Pad control register +#define PADS_BANK0_GPIO16_OFFSET _u(0x00000044) +#define PADS_BANK0_GPIO16_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO16_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO16_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO16_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO16_OD_MSB _u(7) +#define PADS_BANK0_GPIO16_OD_LSB _u(7) +#define PADS_BANK0_GPIO16_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_IE +// Description : Input enable +#define PADS_BANK0_GPIO16_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO16_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO16_IE_MSB _u(6) +#define PADS_BANK0_GPIO16_IE_LSB _u(6) +#define PADS_BANK0_GPIO16_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO16_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO16_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO16_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO16_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO16_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO16_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO16_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO16_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO16_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO16_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO16_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO16_PUE_MSB _u(3) +#define PADS_BANK0_GPIO16_PUE_LSB _u(3) +#define PADS_BANK0_GPIO16_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO16_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO16_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO16_PDE_MSB _u(2) +#define PADS_BANK0_GPIO16_PDE_LSB _u(2) +#define PADS_BANK0_GPIO16_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO16_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO16_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO16_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO16_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO16_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO16_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO16_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO16_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO16_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO16_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO16_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO17 +// Description : Pad control register +#define PADS_BANK0_GPIO17_OFFSET _u(0x00000048) +#define PADS_BANK0_GPIO17_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO17_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO17_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO17_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO17_OD_MSB _u(7) +#define PADS_BANK0_GPIO17_OD_LSB _u(7) +#define PADS_BANK0_GPIO17_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_IE +// Description : Input enable +#define PADS_BANK0_GPIO17_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO17_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO17_IE_MSB _u(6) +#define PADS_BANK0_GPIO17_IE_LSB _u(6) +#define PADS_BANK0_GPIO17_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO17_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO17_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO17_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO17_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO17_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO17_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO17_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO17_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO17_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO17_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO17_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO17_PUE_MSB _u(3) +#define PADS_BANK0_GPIO17_PUE_LSB _u(3) +#define PADS_BANK0_GPIO17_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO17_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO17_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO17_PDE_MSB _u(2) +#define PADS_BANK0_GPIO17_PDE_LSB _u(2) +#define PADS_BANK0_GPIO17_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO17_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO17_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO17_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO17_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO17_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO17_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO17_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO17_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO17_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO17_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO17_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO18 +// Description : Pad control register +#define PADS_BANK0_GPIO18_OFFSET _u(0x0000004c) +#define PADS_BANK0_GPIO18_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO18_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO18_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO18_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO18_OD_MSB _u(7) +#define PADS_BANK0_GPIO18_OD_LSB _u(7) +#define PADS_BANK0_GPIO18_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_IE +// Description : Input enable +#define PADS_BANK0_GPIO18_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO18_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO18_IE_MSB _u(6) +#define PADS_BANK0_GPIO18_IE_LSB _u(6) +#define PADS_BANK0_GPIO18_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO18_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO18_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO18_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO18_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO18_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO18_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO18_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO18_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO18_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO18_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO18_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO18_PUE_MSB _u(3) +#define PADS_BANK0_GPIO18_PUE_LSB _u(3) +#define PADS_BANK0_GPIO18_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO18_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO18_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO18_PDE_MSB _u(2) +#define PADS_BANK0_GPIO18_PDE_LSB _u(2) +#define PADS_BANK0_GPIO18_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO18_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO18_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO18_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO18_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO18_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO18_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO18_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO18_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO18_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO18_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO18_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO19 +// Description : Pad control register +#define PADS_BANK0_GPIO19_OFFSET _u(0x00000050) +#define PADS_BANK0_GPIO19_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO19_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO19_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO19_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO19_OD_MSB _u(7) +#define PADS_BANK0_GPIO19_OD_LSB _u(7) +#define PADS_BANK0_GPIO19_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_IE +// Description : Input enable +#define PADS_BANK0_GPIO19_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO19_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO19_IE_MSB _u(6) +#define PADS_BANK0_GPIO19_IE_LSB _u(6) +#define PADS_BANK0_GPIO19_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO19_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO19_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO19_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO19_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO19_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO19_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO19_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO19_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO19_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO19_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO19_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO19_PUE_MSB _u(3) +#define PADS_BANK0_GPIO19_PUE_LSB _u(3) +#define PADS_BANK0_GPIO19_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO19_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO19_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO19_PDE_MSB _u(2) +#define PADS_BANK0_GPIO19_PDE_LSB _u(2) +#define PADS_BANK0_GPIO19_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO19_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO19_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO19_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO19_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO19_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO19_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO19_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO19_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO19_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO19_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO19_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO20 +// Description : Pad control register +#define PADS_BANK0_GPIO20_OFFSET _u(0x00000054) +#define PADS_BANK0_GPIO20_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO20_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO20_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO20_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO20_OD_MSB _u(7) +#define PADS_BANK0_GPIO20_OD_LSB _u(7) +#define PADS_BANK0_GPIO20_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_IE +// Description : Input enable +#define PADS_BANK0_GPIO20_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO20_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO20_IE_MSB _u(6) +#define PADS_BANK0_GPIO20_IE_LSB _u(6) +#define PADS_BANK0_GPIO20_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO20_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO20_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO20_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO20_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO20_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO20_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO20_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO20_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO20_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO20_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO20_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO20_PUE_MSB _u(3) +#define PADS_BANK0_GPIO20_PUE_LSB _u(3) +#define PADS_BANK0_GPIO20_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO20_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO20_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO20_PDE_MSB _u(2) +#define PADS_BANK0_GPIO20_PDE_LSB _u(2) +#define PADS_BANK0_GPIO20_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO20_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO20_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO20_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO20_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO20_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO20_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO20_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO20_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO20_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO20_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO20_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO21 +// Description : Pad control register +#define PADS_BANK0_GPIO21_OFFSET _u(0x00000058) +#define PADS_BANK0_GPIO21_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO21_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO21_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO21_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO21_OD_MSB _u(7) +#define PADS_BANK0_GPIO21_OD_LSB _u(7) +#define PADS_BANK0_GPIO21_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_IE +// Description : Input enable +#define PADS_BANK0_GPIO21_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO21_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO21_IE_MSB _u(6) +#define PADS_BANK0_GPIO21_IE_LSB _u(6) +#define PADS_BANK0_GPIO21_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO21_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO21_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO21_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO21_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO21_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO21_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO21_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO21_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO21_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO21_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO21_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO21_PUE_MSB _u(3) +#define PADS_BANK0_GPIO21_PUE_LSB _u(3) +#define PADS_BANK0_GPIO21_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO21_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO21_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO21_PDE_MSB _u(2) +#define PADS_BANK0_GPIO21_PDE_LSB _u(2) +#define PADS_BANK0_GPIO21_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO21_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO21_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO21_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO21_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO21_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO21_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO21_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO21_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO21_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO21_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO21_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO22 +// Description : Pad control register +#define PADS_BANK0_GPIO22_OFFSET _u(0x0000005c) +#define PADS_BANK0_GPIO22_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO22_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO22_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO22_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO22_OD_MSB _u(7) +#define PADS_BANK0_GPIO22_OD_LSB _u(7) +#define PADS_BANK0_GPIO22_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_IE +// Description : Input enable +#define PADS_BANK0_GPIO22_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO22_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO22_IE_MSB _u(6) +#define PADS_BANK0_GPIO22_IE_LSB _u(6) +#define PADS_BANK0_GPIO22_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO22_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO22_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO22_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO22_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO22_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO22_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO22_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO22_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO22_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO22_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO22_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO22_PUE_MSB _u(3) +#define PADS_BANK0_GPIO22_PUE_LSB _u(3) +#define PADS_BANK0_GPIO22_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO22_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO22_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO22_PDE_MSB _u(2) +#define PADS_BANK0_GPIO22_PDE_LSB _u(2) +#define PADS_BANK0_GPIO22_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO22_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO22_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO22_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO22_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO22_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO22_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO22_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO22_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO22_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO22_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO22_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO23 +// Description : Pad control register +#define PADS_BANK0_GPIO23_OFFSET _u(0x00000060) +#define PADS_BANK0_GPIO23_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO23_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO23_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO23_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO23_OD_MSB _u(7) +#define PADS_BANK0_GPIO23_OD_LSB _u(7) +#define PADS_BANK0_GPIO23_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_IE +// Description : Input enable +#define PADS_BANK0_GPIO23_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO23_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO23_IE_MSB _u(6) +#define PADS_BANK0_GPIO23_IE_LSB _u(6) +#define PADS_BANK0_GPIO23_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO23_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO23_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO23_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO23_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO23_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO23_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO23_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO23_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO23_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO23_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO23_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO23_PUE_MSB _u(3) +#define PADS_BANK0_GPIO23_PUE_LSB _u(3) +#define PADS_BANK0_GPIO23_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO23_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO23_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO23_PDE_MSB _u(2) +#define PADS_BANK0_GPIO23_PDE_LSB _u(2) +#define PADS_BANK0_GPIO23_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO23_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO23_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO23_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO23_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO23_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO23_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO23_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO23_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO23_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO23_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO23_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO24 +// Description : Pad control register +#define PADS_BANK0_GPIO24_OFFSET _u(0x00000064) +#define PADS_BANK0_GPIO24_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO24_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO24_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO24_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO24_OD_MSB _u(7) +#define PADS_BANK0_GPIO24_OD_LSB _u(7) +#define PADS_BANK0_GPIO24_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_IE +// Description : Input enable +#define PADS_BANK0_GPIO24_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO24_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO24_IE_MSB _u(6) +#define PADS_BANK0_GPIO24_IE_LSB _u(6) +#define PADS_BANK0_GPIO24_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO24_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO24_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO24_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO24_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO24_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO24_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO24_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO24_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO24_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO24_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO24_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO24_PUE_MSB _u(3) +#define PADS_BANK0_GPIO24_PUE_LSB _u(3) +#define PADS_BANK0_GPIO24_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO24_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO24_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO24_PDE_MSB _u(2) +#define PADS_BANK0_GPIO24_PDE_LSB _u(2) +#define PADS_BANK0_GPIO24_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO24_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO24_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO24_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO24_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO24_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO24_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO24_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO24_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO24_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO24_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO24_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO25 +// Description : Pad control register +#define PADS_BANK0_GPIO25_OFFSET _u(0x00000068) +#define PADS_BANK0_GPIO25_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO25_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO25_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO25_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO25_OD_MSB _u(7) +#define PADS_BANK0_GPIO25_OD_LSB _u(7) +#define PADS_BANK0_GPIO25_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_IE +// Description : Input enable +#define PADS_BANK0_GPIO25_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO25_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO25_IE_MSB _u(6) +#define PADS_BANK0_GPIO25_IE_LSB _u(6) +#define PADS_BANK0_GPIO25_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO25_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO25_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO25_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO25_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO25_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO25_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO25_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO25_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO25_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO25_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO25_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO25_PUE_MSB _u(3) +#define PADS_BANK0_GPIO25_PUE_LSB _u(3) +#define PADS_BANK0_GPIO25_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO25_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO25_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO25_PDE_MSB _u(2) +#define PADS_BANK0_GPIO25_PDE_LSB _u(2) +#define PADS_BANK0_GPIO25_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO25_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO25_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO25_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO25_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO25_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO25_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO25_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO25_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO25_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO25_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO25_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO26 +// Description : Pad control register +#define PADS_BANK0_GPIO26_OFFSET _u(0x0000006c) +#define PADS_BANK0_GPIO26_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO26_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO26_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO26_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO26_OD_MSB _u(7) +#define PADS_BANK0_GPIO26_OD_LSB _u(7) +#define PADS_BANK0_GPIO26_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_IE +// Description : Input enable +#define PADS_BANK0_GPIO26_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO26_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO26_IE_MSB _u(6) +#define PADS_BANK0_GPIO26_IE_LSB _u(6) +#define PADS_BANK0_GPIO26_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO26_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO26_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO26_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO26_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO26_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO26_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO26_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO26_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO26_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO26_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO26_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO26_PUE_MSB _u(3) +#define PADS_BANK0_GPIO26_PUE_LSB _u(3) +#define PADS_BANK0_GPIO26_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO26_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO26_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO26_PDE_MSB _u(2) +#define PADS_BANK0_GPIO26_PDE_LSB _u(2) +#define PADS_BANK0_GPIO26_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO26_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO26_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO26_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO26_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO26_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO26_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO26_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO26_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO26_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO26_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO26_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO27 +// Description : Pad control register +#define PADS_BANK0_GPIO27_OFFSET _u(0x00000070) +#define PADS_BANK0_GPIO27_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO27_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO27_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO27_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO27_OD_MSB _u(7) +#define PADS_BANK0_GPIO27_OD_LSB _u(7) +#define PADS_BANK0_GPIO27_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_IE +// Description : Input enable +#define PADS_BANK0_GPIO27_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO27_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO27_IE_MSB _u(6) +#define PADS_BANK0_GPIO27_IE_LSB _u(6) +#define PADS_BANK0_GPIO27_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO27_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO27_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO27_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO27_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO27_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO27_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO27_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO27_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO27_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO27_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO27_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO27_PUE_MSB _u(3) +#define PADS_BANK0_GPIO27_PUE_LSB _u(3) +#define PADS_BANK0_GPIO27_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO27_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO27_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO27_PDE_MSB _u(2) +#define PADS_BANK0_GPIO27_PDE_LSB _u(2) +#define PADS_BANK0_GPIO27_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO27_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO27_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO27_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO27_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO27_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO27_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO27_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO27_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO27_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO27_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO27_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO28 +// Description : Pad control register +#define PADS_BANK0_GPIO28_OFFSET _u(0x00000074) +#define PADS_BANK0_GPIO28_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO28_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO28_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO28_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO28_OD_MSB _u(7) +#define PADS_BANK0_GPIO28_OD_LSB _u(7) +#define PADS_BANK0_GPIO28_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_IE +// Description : Input enable +#define PADS_BANK0_GPIO28_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO28_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO28_IE_MSB _u(6) +#define PADS_BANK0_GPIO28_IE_LSB _u(6) +#define PADS_BANK0_GPIO28_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO28_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO28_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO28_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO28_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO28_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO28_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO28_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO28_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO28_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO28_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO28_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO28_PUE_MSB _u(3) +#define PADS_BANK0_GPIO28_PUE_LSB _u(3) +#define PADS_BANK0_GPIO28_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO28_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO28_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO28_PDE_MSB _u(2) +#define PADS_BANK0_GPIO28_PDE_LSB _u(2) +#define PADS_BANK0_GPIO28_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO28_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO28_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO28_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO28_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO28_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO28_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO28_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO28_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO28_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO28_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO28_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_GPIO29 +// Description : Pad control register +#define PADS_BANK0_GPIO29_OFFSET _u(0x00000078) +#define PADS_BANK0_GPIO29_BITS _u(0x000000ff) +#define PADS_BANK0_GPIO29_RESET _u(0x00000056) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_GPIO29_OD_RESET _u(0x0) +#define PADS_BANK0_GPIO29_OD_BITS _u(0x00000080) +#define PADS_BANK0_GPIO29_OD_MSB _u(7) +#define PADS_BANK0_GPIO29_OD_LSB _u(7) +#define PADS_BANK0_GPIO29_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_IE +// Description : Input enable +#define PADS_BANK0_GPIO29_IE_RESET _u(0x1) +#define PADS_BANK0_GPIO29_IE_BITS _u(0x00000040) +#define PADS_BANK0_GPIO29_IE_MSB _u(6) +#define PADS_BANK0_GPIO29_IE_LSB _u(6) +#define PADS_BANK0_GPIO29_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_GPIO29_DRIVE_RESET _u(0x1) +#define PADS_BANK0_GPIO29_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_GPIO29_DRIVE_MSB _u(5) +#define PADS_BANK0_GPIO29_DRIVE_LSB _u(4) +#define PADS_BANK0_GPIO29_DRIVE_ACCESS "RW" +#define PADS_BANK0_GPIO29_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_GPIO29_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_GPIO29_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_GPIO29_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_PUE +// Description : Pull up enable +#define PADS_BANK0_GPIO29_PUE_RESET _u(0x0) +#define PADS_BANK0_GPIO29_PUE_BITS _u(0x00000008) +#define PADS_BANK0_GPIO29_PUE_MSB _u(3) +#define PADS_BANK0_GPIO29_PUE_LSB _u(3) +#define PADS_BANK0_GPIO29_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_PDE +// Description : Pull down enable +#define PADS_BANK0_GPIO29_PDE_RESET _u(0x1) +#define PADS_BANK0_GPIO29_PDE_BITS _u(0x00000004) +#define PADS_BANK0_GPIO29_PDE_MSB _u(2) +#define PADS_BANK0_GPIO29_PDE_LSB _u(2) +#define PADS_BANK0_GPIO29_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_GPIO29_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_GPIO29_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_GPIO29_SCHMITT_MSB _u(1) +#define PADS_BANK0_GPIO29_SCHMITT_LSB _u(1) +#define PADS_BANK0_GPIO29_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_GPIO29_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_GPIO29_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_GPIO29_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_GPIO29_SLEWFAST_MSB _u(0) +#define PADS_BANK0_GPIO29_SLEWFAST_LSB _u(0) +#define PADS_BANK0_GPIO29_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_SWCLK +// Description : Pad control register +#define PADS_BANK0_SWCLK_OFFSET _u(0x0000007c) +#define PADS_BANK0_SWCLK_BITS _u(0x000000ff) +#define PADS_BANK0_SWCLK_RESET _u(0x000000da) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_SWCLK_OD_RESET _u(0x1) +#define PADS_BANK0_SWCLK_OD_BITS _u(0x00000080) +#define PADS_BANK0_SWCLK_OD_MSB _u(7) +#define PADS_BANK0_SWCLK_OD_LSB _u(7) +#define PADS_BANK0_SWCLK_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_IE +// Description : Input enable +#define PADS_BANK0_SWCLK_IE_RESET _u(0x1) +#define PADS_BANK0_SWCLK_IE_BITS _u(0x00000040) +#define PADS_BANK0_SWCLK_IE_MSB _u(6) +#define PADS_BANK0_SWCLK_IE_LSB _u(6) +#define PADS_BANK0_SWCLK_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_SWCLK_DRIVE_RESET _u(0x1) +#define PADS_BANK0_SWCLK_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_SWCLK_DRIVE_MSB _u(5) +#define PADS_BANK0_SWCLK_DRIVE_LSB _u(4) +#define PADS_BANK0_SWCLK_DRIVE_ACCESS "RW" +#define PADS_BANK0_SWCLK_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_SWCLK_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_SWCLK_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_SWCLK_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_PUE +// Description : Pull up enable +#define PADS_BANK0_SWCLK_PUE_RESET _u(0x1) +#define PADS_BANK0_SWCLK_PUE_BITS _u(0x00000008) +#define PADS_BANK0_SWCLK_PUE_MSB _u(3) +#define PADS_BANK0_SWCLK_PUE_LSB _u(3) +#define PADS_BANK0_SWCLK_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_PDE +// Description : Pull down enable +#define PADS_BANK0_SWCLK_PDE_RESET _u(0x0) +#define PADS_BANK0_SWCLK_PDE_BITS _u(0x00000004) +#define PADS_BANK0_SWCLK_PDE_MSB _u(2) +#define PADS_BANK0_SWCLK_PDE_LSB _u(2) +#define PADS_BANK0_SWCLK_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_SWCLK_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_SWCLK_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_SWCLK_SCHMITT_MSB _u(1) +#define PADS_BANK0_SWCLK_SCHMITT_LSB _u(1) +#define PADS_BANK0_SWCLK_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWCLK_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_SWCLK_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_SWCLK_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_SWCLK_SLEWFAST_MSB _u(0) +#define PADS_BANK0_SWCLK_SLEWFAST_LSB _u(0) +#define PADS_BANK0_SWCLK_SLEWFAST_ACCESS "RW" +// ============================================================================= +// Register : PADS_BANK0_SWD +// Description : Pad control register +#define PADS_BANK0_SWD_OFFSET _u(0x00000080) +#define PADS_BANK0_SWD_BITS _u(0x000000ff) +#define PADS_BANK0_SWD_RESET _u(0x0000005a) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_OD +// Description : Output disable. Has priority over output enable from +// peripherals +#define PADS_BANK0_SWD_OD_RESET _u(0x0) +#define PADS_BANK0_SWD_OD_BITS _u(0x00000080) +#define PADS_BANK0_SWD_OD_MSB _u(7) +#define PADS_BANK0_SWD_OD_LSB _u(7) +#define PADS_BANK0_SWD_OD_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_IE +// Description : Input enable +#define PADS_BANK0_SWD_IE_RESET _u(0x1) +#define PADS_BANK0_SWD_IE_BITS _u(0x00000040) +#define PADS_BANK0_SWD_IE_MSB _u(6) +#define PADS_BANK0_SWD_IE_LSB _u(6) +#define PADS_BANK0_SWD_IE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_DRIVE +// Description : Drive strength. +// 0x0 -> 2mA +// 0x1 -> 4mA +// 0x2 -> 8mA +// 0x3 -> 12mA +#define PADS_BANK0_SWD_DRIVE_RESET _u(0x1) +#define PADS_BANK0_SWD_DRIVE_BITS _u(0x00000030) +#define PADS_BANK0_SWD_DRIVE_MSB _u(5) +#define PADS_BANK0_SWD_DRIVE_LSB _u(4) +#define PADS_BANK0_SWD_DRIVE_ACCESS "RW" +#define PADS_BANK0_SWD_DRIVE_VALUE_2MA _u(0x0) +#define PADS_BANK0_SWD_DRIVE_VALUE_4MA _u(0x1) +#define PADS_BANK0_SWD_DRIVE_VALUE_8MA _u(0x2) +#define PADS_BANK0_SWD_DRIVE_VALUE_12MA _u(0x3) +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_PUE +// Description : Pull up enable +#define PADS_BANK0_SWD_PUE_RESET _u(0x1) +#define PADS_BANK0_SWD_PUE_BITS _u(0x00000008) +#define PADS_BANK0_SWD_PUE_MSB _u(3) +#define PADS_BANK0_SWD_PUE_LSB _u(3) +#define PADS_BANK0_SWD_PUE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_PDE +// Description : Pull down enable +#define PADS_BANK0_SWD_PDE_RESET _u(0x0) +#define PADS_BANK0_SWD_PDE_BITS _u(0x00000004) +#define PADS_BANK0_SWD_PDE_MSB _u(2) +#define PADS_BANK0_SWD_PDE_LSB _u(2) +#define PADS_BANK0_SWD_PDE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_SCHMITT +// Description : Enable schmitt trigger +#define PADS_BANK0_SWD_SCHMITT_RESET _u(0x1) +#define PADS_BANK0_SWD_SCHMITT_BITS _u(0x00000002) +#define PADS_BANK0_SWD_SCHMITT_MSB _u(1) +#define PADS_BANK0_SWD_SCHMITT_LSB _u(1) +#define PADS_BANK0_SWD_SCHMITT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PADS_BANK0_SWD_SLEWFAST +// Description : Slew rate control. 1 = Fast, 0 = Slow +#define PADS_BANK0_SWD_SLEWFAST_RESET _u(0x0) +#define PADS_BANK0_SWD_SLEWFAST_BITS _u(0x00000001) +#define PADS_BANK0_SWD_SLEWFAST_MSB _u(0) +#define PADS_BANK0_SWD_SLEWFAST_LSB _u(0) +#define PADS_BANK0_SWD_SLEWFAST_ACCESS "RW" +// ============================================================================= +#endif // _HARDWARE_REGS_PADS_BANK0_H + |