aboutsummaryrefslogtreecommitdiffstats
path: root/docs/G-Codes.md
Commit message (Expand)AuthorAgeFilesLines
* docs: add initial temperature_probe documentationEric Callahan2024-07-171-0/+36
* docs: Add documentation for probe_eddy_currentKevin O'Connor2024-04-091-0/+22
* docs: Sort axis_twist_compensation in G-Codes.mdKevin O'Connor2024-03-201-11/+11
* toolhead: Replace max_accel_to_decel with minimum_cruise_ratioKevin O'Connor2024-03-131-1/+1
* docs: updates BED_MESH_CALIBRATE descriptionPedro Lamas2024-02-201-5/+11
* extruder: Remove deprecated commands and configKevin O'Connor2024-02-151-6/+0
* docs: update BED_MESH_OFFSET descriptionEric Callahan2024-02-151-4/+6
* pwm_cycle_time: New module for output pins with dynamic cycle timesKevin O'Connor2024-01-231-11/+19
* docs: Improve max_accel documentation in Config_Reference.mdKevin O'Connor2023-12-051-2/+5
* pwm_tool: Add support for high-speed PWM pin updatesKevin O'Connor2023-11-161-1/+2
* axis_twist_compensation: Add X twist compensation module (#6149)Philippe Daouadi2023-08-011-0/+11
* idex_modes: COPY and MIRROR mode implementation (#6297)Dmitry Butyugin2023-08-011-3/+27
* resonance_tester: Apply input shaper params on SHAPER_CALIBRATEDmitry Butyugin2023-05-251-1/+3
* resonance_tester: Support CHIPS= parameter in SHAPER_CALIBRATE commandDmitry Butyugin2023-05-251-1/+1
* docs: Fix typo in docs (#6147)Alex Voinea2023-03-301-1/+1
* tmc: DUMP_TMC optional REGISTER parameterAlex Voinea2023-03-301-2/+3
* tmc: SET_TMC_FIELD VELOCITYAlex Voinea2023-03-201-2/+5
* probe: Allow overriding horizontal_move_z on gcodeLasse Dalegaard2023-03-141-36/+41
* tmc5160: allow changing the globalscaler at runtimeAlex Voinea2023-03-071-1/+4
* docs: Improve SET_PIN documentation in G-Codes.mdKevin O'Connor2023-01-131-3/+11
* gcode_arcs: support XY, XZ and YZ planesAndrew Mirsky2022-12-111-2/+3
* print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to K...Stefan Dej2022-10-051-0/+12
* z_thermal_adjust: Add Z thermal adjuster module (#4157)alchemyEngine2022-09-251-0/+18
* mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737)jake-b2022-09-021-0/+14
* respond: No forced spaces (#5152)chestwood962022-06-301-0/+2
* docs: add SET_DISPLAY_TEXT documentationEric Callahan2022-06-271-0/+5
* docs: add exclude_object documentationFrank Tackitt2022-06-031-0/+51
* adxl345: Support recording data from multiple ADXL345's in one run, and more....Mikkel Schmidt2022-05-231-7/+12
* docs: Line wrapping in G-Codes.mdKevin O'Connor2022-05-231-1/+3
* docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522)Kevin Nguyen2022-05-231-2/+2
* docs: fix links to Config_Reference.mdth33xitus2022-05-181-8/+8
* docs: Update G-Codes.md (#5487)3-5-202022-05-091-1/+1
* docs: Fix typo in query_adc section of G-Codes.mdKevin O'Connor2022-04-211-1/+1
* docs: Fix smarteffector link in G-Codes.mdKevin O'Connor2022-04-091-1/+1
* docs: Minor updates to SmartEffector docsKevin O'Connor2022-04-091-12/+13
* smart_effector: Config and command referenceDmitry Butyugin2022-04-091-0/+28
* led: Support setting display_template parameters via SET_LED_TEMPLATEKevin O'Connor2022-03-311-7/+9
* led: Support automated LED updates based on display_template resultsKevin O'Connor2022-03-311-0/+17
* led: Add support for PWM controlled LEDsKevin O'Connor2022-03-311-17/+17
* angle: Add support for reading tle5012b chip registers (for debugging)Kevin O'Connor2022-03-291-0/+12
* angle: Initial support for angle sensor calibrationKevin O'Connor2022-03-291-0/+21
* docs: Improve G-Codes.md description of extruder commandsKevin O'Connor2022-03-081-11/+18
* docs: Note g-code output is not intented to be parsed in G-Codes.mdKevin O'Connor2022-03-031-1/+4
* docs: Add link to GET_POSITION description in G-Codes.mdKevin O'Connor2022-03-031-1/+3
* docs: Drop duplicated firmware_retraction G-Codes sectionWilhelm Schuster2022-02-141-26/+18
* extruder: Deprecate old extruder commands and shared_heater config optionKevin O'Connor2022-02-101-14/+2
* extruder: Add new SYNC_EXTRUDER_MOTION commandKevin O'Connor2022-02-101-1/+11
* extruder: Add support for reversing the direction of extruder stepper movementKevin O'Connor2022-02-101-5/+7
* extruder: Add a SET_EXTRUDER_ROTATION_DISTANCE commandKevin O'Connor2022-02-101-4/+13
* docs: Fix unescaped angle brackets in G-Codes.mdKevin O'Connor2022-02-011-7/+7
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-02 03:16:03 +0000