diff options
| author | Philippe Daouadi <philippe@ud2.org> | 2023-08-01 19:08:53 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2023-08-01 13:08:53 -0400 |
| commit | 039daecb4fde7d37b255eec1308abb5ba41a9ba9 (patch) | |
| tree | 1e04d78b7b818ab712d2469fbf101026f77f97a8 /docs/G-Codes.md | |
| parent | 36be1cfc5109355fb50cececedee936905fc6c7d (diff) | |
| download | kutter-039daecb4fde7d37b255eec1308abb5ba41a9ba9.tar.gz kutter-039daecb4fde7d37b255eec1308abb5ba41a9ba9.tar.xz kutter-039daecb4fde7d37b255eec1308abb5ba41a9ba9.zip | |
axis_twist_compensation: Add X twist compensation module (#6149)
Implements AxisTwistCompensation, and Calibrater
Supports calibration of z-offsets caused by x gantry twist
Modify PrinterProbe._probe function to check if the probed z value should be adjusted
based on axis_twist_compensation's configuration
Add documentation for [axis_twist_compensation] module
Signed-off-by: Jeremy Tan <jeremytkw98@gmail.com>
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 470f40a5..1f466dcd 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -1339,6 +1339,17 @@ print. #### SDCARD_RESET_FILE `SDCARD_RESET_FILE`: Unload file and clear SD state. +### [axis_twist_compensation] + +The following commands are available when the +[axis_twist_compensation config +section](Config_Reference.md#axis_twist_compensation) is enabled. + +#### AXIS_TWIST_COMPENSATION_CALIBRATE +`AXIS_TWIST_COMPENSATION_CALIBRATE [SAMPLE_COUNT=<value>]`: Initiates the X +twist calibration wizard. `SAMPLE_COUNT` specifies the number of points along +the X axis to calibrate at and defaults to 3. + ### [z_thermal_adjust] The following commands are available when the |