diff options
| author | Kevin Nguyen <ngynkvn@gmail.com> | 2022-05-23 15:49:59 -0400 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2022-05-23 15:49:59 -0400 |
| commit | 3081899883d465be58b17ca50b55070bd1690496 (patch) | |
| tree | 6aac86e88432974ed341e13f74bdbfe297a39e96 /docs/G-Codes.md | |
| parent | 19a478de3763a80bf77c61e6328b3f9270b4f5fd (diff) | |
| download | kutter-3081899883d465be58b17ca50b55070bd1690496.tar.gz kutter-3081899883d465be58b17ca50b55070bd1690496.tar.xz kutter-3081899883d465be58b17ca50b55070bd1690496.zip | |
docs: Documentation on screws_tilt_calculate MAX_DEVIATION parameter (#5522)
Signed-off-by: Kevin Nguyen <ngynkvn@gmail.com>
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 5e562da4..7d6313d5 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -979,7 +979,7 @@ is enabled (also see the [manual level guide](Manual_Level.md#adjusting-bed-leveling-screws-using-the-bed-probe)). #### SCREWS_TILT_CALCULATE -`SCREWS_TILT_CALCULATE [DIRECTION=CW|CCW] +`SCREWS_TILT_CALCULATE [DIRECTION=CW|CCW] [MAX_DEVIATION=<value>] [<probe_parameter>=<value>]`: This command will invoke the bed screws adjustment tool. It will command the nozzle to different locations (as defined in the config file) probing the z height and calculate the @@ -987,7 +987,7 @@ number of knob turns to adjust the bed level. If DIRECTION is specified, the knob turns will all be in the same direction, clockwise (CW) or counterclockwise (CCW). See the PROBE command for details on the optional probe parameters. IMPORTANT: You MUST always do a G28 -before using this command. +before using this command. If MAX_DEVIATION is specified, the command will raise a gcode error if any difference in the screw height relative to the base screw height is greater than the value provided. ### [sdcard_loop] |