aboutsummaryrefslogtreecommitdiffstats
path: root/config/example-extras.cfg
Commit message (Collapse)AuthorAgeFilesLines
* config: Fix typo in gcode_macro default_parameter descriptionKevin O'Connor2018-09-301-1/+1
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* gcode_macro: default parameter valuesJanar Sööt2018-09-301-0/+8
| | | | | Signed-off-by: Janar Sööt <janar.soot@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Note gcode_macro string formatting in example-extras.cfgKevin O'Connor2018-09-261-2/+6
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Move some sections around in example-extras.cfgKevin O'Connor2018-09-261-49/+53
| | | | | | | Move the quad_gantry_level description closer to z_tilt section. Move the force_move section closer to the homing_override section. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* heater: Add new TURN_OFF_HEATERS commandKevin O'Connor2018-09-181-1/+1
| | | | | | | Add a command that will turn off all heaters in the printer. Run this command in the default idle_timeout action. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* quad_gantry_level: Add gantry leveling (ruled hyperbolic parabola ↵Maks Zolin2018-09-121-0/+40
| | | | | correction) (#631) Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
* config: Update example-extras.cfg (#641)Boffgithub2018-09-121-2/+2
| | | | | Just correcting a couple of spelling errors I noticed. Signed-off-by: Ben Warren <boffdroid@gmail.com>
* tmc2660: Implementation of TMC2660 extra (#621)Florian Heilmann2018-09-111-0/+80
| | | Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
* config: Be clear that multi-line parameters must use indentationKevin O'Connor2018-09-021-35/+44
| | | | | | | Also, be clear that probe points are nozzle coordinates (not probe coordinates). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* probe: Add ability to multi-sample points to ProbePointsHelperArksine2018-08-291-1/+18
| | | | Signed-off-by: Eric Callahan <arksine.code@gmail.com>
* docs: Fix spelling error in example-extras.cfgKevin O'Connor2018-08-281-4/+4
| | | | | | Fix "interally" spelling error - reported by @bistory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2208: Initial support for configuring TMC2208 driversKevin O'Connor2018-08-271-0/+53
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* display menu module for klipperJanar Sööt2018-08-201-0/+27
| | | | Signed-off-by: Janar Sööt <janar.soot@gmail.com>
* bed_mesh: move probe x and y offsets to the [probe] moduleArksine2018-08-191-15/+21
| | | | | | All probe offsets are now passed to the finalize() callback in the ProbePointsHelper Class. Signed-off-by: Eric Callahan <arksine.code@gmail.com>
* config: Update example-extras.cfg (#544)Boffgithub2018-08-191-1/+1
| | | | | Changed 'endstop' to 'stepper' in 'multi-steppers axes' section Signed-off-by: Ben Warren <boffdroid@gmail.com>
* heater_fan: Allow multiple heaters to be defined for a heater_fanKevin O'Connor2018-08-171-1/+3
| | | | | | | Support the case where a single cooling fan is used with multiple extruders. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: update examples-extra.cfg to include the bed_mesh moduleArksine2018-08-171-0/+60
| | | | Signed-off-by: Eric Callahan <arksine.code@gmail.com>
* config: Minor changes to example-extras.cfg documentationKevin O'Connor2018-08-031-11/+10
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* force_move: Add support for FORCE_MOVE commandKevin O'Connor2018-07-261-0/+9
| | | | | | | Add initial support for commands that will forcibly move a stepper (without updating the kinematic classes with the new position). Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* spi_temperature: Provide a default value for spi_speedKevin O'Connor2018-07-241-2/+2
| | | | | | | All of the Maxim chips support a 4Mhz spi transfer rate, so use that as a default spi speed. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* spi_temperature: Remove spi_mode parameterKevin O'Connor2018-07-241-3/+0
| | | | | | All of the Maxim chips can use SPI mode 1, so no need to configure it. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* thermocouple: Add initial support for common SPI temperature sensing chipsKevin O'Connor2018-07-241-0/+32
| | | | | Signed-off-by: Petri Honkala <cruwaller@gmail.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* idle_timeout: Move timeout handling from toolhead.py to new extras moduleKevin O'Connor2018-07-161-0/+11
| | | | | | | | Move the "motor_off_timeout" tracking to a new module in the extras/ directory. This makes it easier to customize the idle timeout behavior. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* z_tilt: Don't default "points" parameter to "z_positions" parameterKevin O'Connor2018-07-151-2/+1
| | | | | | | | It's rare to have all the Z stepper locations directly under the printable surface, so using z_positions for points is not a good default. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Minor updates to example-extras.cfgKevin O'Connor2018-07-121-9/+9
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* mcp4451: Add initial support for programming the mcp4451 on lpc176xKevin O'Connor2018-06-291-0/+29
| | | | | | Add support for programming smoothieboard current. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: update example-extras.cfg to include uc1701 displayArksine2018-06-271-5/+9
| | | | Signed-off-by: Eric Callahan <arksine.code@gmail.com>
* lcd_st7920: Use a longer delay at the start of each command/dataKevin O'Connor2018-06-221-4/+0
| | | | | | | | | | | It appears the st7920 requires a longer delay when switching from command to data mode (and vice-versa). Slower MCUs don't show a problem because the klipper command processing time results in a sufficient delay. However, some of the faster MCUs can process klipper commands fast enough that the next st7920 transfer is sent too fast. Add an additional delay to account for this. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* display: Allow the ST7920_DISPLAY parameter to be configuredKevin O'Connor2018-06-211-0/+4
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* homing_override: Add axes config parameterHans Raaf2018-06-111-1/+7
| | | | | | | | | Added a config parameter to define the homing override axes. This way one can still home x and y axis without the z-probe cycle coming in the way. Signed-off-by: Hans Raaf <hr-klipper@oderwat.de> Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* gcode_macro: Add the ability to define custom g-code macrosKevin O'Connor2018-05-251-0/+8
| | | | | | | Add the ability to add a custom g-code command that in turn executes one or more configured g-code commands. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2130: Allow the PWMCONF register to be configuredKevin O'Connor2018-05-251-0/+4
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2130: Initial support for sensorless homingKevin O'Connor2018-05-251-0/+8
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2130: Configure stealthchop velocity limitKevin O'Connor2018-05-251-5/+10
| | | | | | | Change stealhchop config option to a stealthchop_threshold configuration option. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2130: The default TOFF time should be 4Kevin O'Connor2018-05-241-1/+1
| | | | | | | The recommended TOFF time in "standalone mode" according to the tmc2130 is 4, so use that as the default. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* z_tilt: Add support for Z_TILT_ADJUSTKevin O'Connor2018-05-221-0/+22
| | | | | | | Add new module to support independent adjustments to multiple Z steppers to account for bed tilt. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* tmc2130: Add initial support for TMC2130 stepper motor driversKevin O'Connor2018-05-201-0/+38
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* fan: Allow the fan shutdown_speed to be configuredKevin O'Connor2018-05-181-18/+30
| | | | | | | Add a shutdown_speed config option to fans so that users can specify the speed on a shutdown event. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* Add temperature controlled fansDouglas Hammond2018-05-171-5/+26
| | | | Signed-off-by Douglas Hammond <wizhippo@gmail.com>
* temperature_fan: Add support for temperature-triggered fan.Michael Barbour2018-05-101-0/+31
| | | | Signed-off-by: Michael Barbour <barbour.michael.0@gmail.com>
* config: Fix typo in adc_temperature section (Ohms vs Volts)Kevin O'Connor2018-04-301-1/+1
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* fan: Scale fan speed requests between 0 and max_powerKevin O'Connor2018-04-201-2/+2
| | | | | | | | If the fan's max power is limited by the config, then scale speed requests between 0 and max_power. This makes more sense for typical g-code fan speeds. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* adc_temperature: Support defining custom sensors in the config fileKevin O'Connor2018-04-091-2/+24
| | | | | | | Allow the user to define a custom sensor with their own set of temperature/voltage measurements. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* thermistor: Add support for defining custom thermistorsKevin O'Connor2018-04-091-0/+25
| | | | | | Add the ability to define a new thermistor type in the config file. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Update indentation of display section in example-extras.cfgKevin O'Connor2018-04-091-9/+8
| | | | | | Use the same indentation as the other sections. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* probe: Add z_offset parameterKevin O'Connor2018-03-171-3/+3
| | | | | | | | | Move the probe_z_offset parameter from delta_calibrate and bed_tilt_calibrate to a z_offset parameter within the probe config section. It's easier to understand the z offset setting when it is in the probe config section. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* probe: Default z_position to the configured minimum position on Z axisKevin O'Connor2018-03-171-3/+0
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* output_pin: Move pwm and digital output pins to new module in extras/Kevin O'Connor2018-03-171-48/+29
| | | | | | | | Rename the digital_output, pwm_output, and static_pwm_output config sections to output_pin and move to a new module in the extras/ directory. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* verify_heater: Scale hysteresis duration checkKevin O'Connor2018-03-111-7/+10
| | | | | | | | | | If a heater falls out of the target range, accumulate the temperature differences to determine if an error should be raised. This should make it less likely to report an error for heaters that drift slightly out of range, and it should make error reporting faster for heaters that rapidly fall out of range. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* verify_heater: Change default hysteresis to 10 degreesKevin O'Connor2018-03-111-4/+4
| | | | | | | A default of 4 degrees and 10 seconds may be too aggressive - change the default to 10 degrees and 15 seconds. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-02 10:09:00 +0000