diff options
| author | Douglas Hammond <wizhippo@gmail.com> | 2018-05-13 23:02:01 -0400 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2018-05-17 12:50:21 -0400 |
| commit | 5712283e9192b93cd614a9e632493f9d530a446f (patch) | |
| tree | 74fe7405b9292025da510a6e55090721f0ccce0b /config/example-extras.cfg | |
| parent | 6d376017bc3bbcee8e6bbdd7a7126023d49d0dc4 (diff) | |
| download | kutter-5712283e9192b93cd614a9e632493f9d530a446f.tar.gz kutter-5712283e9192b93cd614a9e632493f9d530a446f.tar.xz kutter-5712283e9192b93cd614a9e632493f9d530a446f.zip | |
Add temperature controlled fans
Signed-off-by Douglas Hammond <wizhippo@gmail.com>
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 31 |
1 files changed, 26 insertions, 5 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 08fd6c4f..354eb333 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -233,14 +233,35 @@ # will go into a shutdown state. Set this range just wide enough so # that reasonable temperatures do not result in an error. These # parameters must be provided. -#temp: 40.0 -# A temperature (in Celsius) that the sensor must exceed before the -# fan is enabled. The default is 40 Celsius. -#fan_speed: 1.0 +#target_temp: 40.0 +# A temperature (in Celsius) that will be the target temperature +#max_speed: 1.0 # The fan speed (expressed as a value from 0.0 to 1.0) that the fan # will be set to when the sensor temperature exceeds the set value. # The default is 1.0. - +#min_speed: 1.0 +# The minumin fan speed (expressed as a value from 0.0 to 1.0) that the fan +# will be set to when the sensor temperature is the set value. +# The default is 0.3. +#control: watermark +# Control algorithm (either watermark or pid). This parameter must +# be provided. +#pid_Kp: 40 +# Kp is the "proportional" constant for the pid. This parameter must +# be provided for PID heaters. +pid_Ki: 0.2 +# Ki is the "integral" constant for the pid. This parameter must be +# provided for PID heaters. +pid_Kd: 0.1 +# Kd is the "derivative" constant for the pid. This parameter must +# be provided for PID heaters. +#pid_deriv_time: 2.0 +# A time value (in seconds) over which the derivative in the pid +# will be smoothed to reduce the impact of measurement noise. The +# default is 2 seconds. +#pid_integral_max: +# The maximum "windup" the integral term may accumulate. The default +# is to use the same value as max_power. # Additional micro-controllers (one may define any number of sections # with an "mcu" prefix). Additional micro-controllers introduce |