diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2018-08-17 10:20:12 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-08-17 10:20:12 -0400 |
| commit | 1b07be070b48c3f60b17ea8e8b19f1f52864ece3 (patch) | |
| tree | 51681ba983b3db7e1e6fec05117e37a1db9a7085 /config/example-extras.cfg | |
| parent | e88eab18d0a51b5ce0cd6d572aea57e547c2da2c (diff) | |
| download | kutter-1b07be070b48c3f60b17ea8e8b19f1f52864ece3.tar.gz kutter-1b07be070b48c3f60b17ea8e8b19f1f52864ece3.tar.xz kutter-1b07be070b48c3f60b17ea8e8b19f1f52864ece3.zip | |
heater_fan: Allow multiple heaters to be defined for a heater_fan
Support the case where a single cooling fan is used with multiple
extruders.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/example-extras.cfg')
| -rw-r--r-- | config/example-extras.cfg | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 5cf33a40..9788fa1e 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -298,7 +298,9 @@ # above parameters. #heater: extruder # Name of the config section defining the heater that this fan is -# associated with. The default is "extruder". +# associated with. If a comma separated list of heater names is +# provided here, then the fan will be enabled when any of the given +# heaters are enabled. The default is "extruder". #heater_temp: 50.0 # A temperature (in Celsius) that the heater must drop below before # the fan is disabled. The default is 50 Celsius. |