aboutsummaryrefslogtreecommitdiffstats
path: root/docs
Commit message (Expand)AuthorAgeFilesLines
* docs: Measuring_Resonances.md improved information on I2C accelerometers and ...Dr. Matthew Swabey2023-04-071-38/+161
* docs: Fix typo in docs (#6147)Alex Voinea2023-03-301-1/+1
* tmc: DUMP_TMC optional REGISTER parameterAlex Voinea2023-03-301-2/+3
* tmc: Enable sg_angle_offset for smooth switching from Stealthchop to Spreadcy...BIGTREETECH2023-03-271-0/+1
* docs: Document how to connect ADXL345 to Pico then on to Pi. (#5996)Chris Thompson2023-03-274-1/+88
* avr: Allow I2C bus speed to be set by Klipper (#6111)Dr. Matthew Swabey2023-03-211-8/+8
* tmc: SET_TMC_FIELD VELOCITYAlex Voinea2023-03-201-2/+5
* docs: Update reviewers in CONTRIBUTING.mdKevin O'Connor2023-03-151-1/+1
* docs: Remove comment about default profile loadingMaurice Breit2023-03-141-3/+1
* probe: expose name on status reportPedro Lamas2023-03-141-0/+1
* docs: addition of slicer specific gcode for START_PRINT (#6063)JamesH19782023-03-141-0/+34
* probe: Allow overriding horizontal_move_z on gcodeLasse Dalegaard2023-03-141-36/+41
* tmc5160: allow changing the globalscaler at runtimeAlex Voinea2023-03-072-1/+12
* tmc: Fix s2vs field formattersAlex Voinea2023-03-071-1/+1
* tmc2240: initial implementationAlex Voinea2023-03-011-0/+119
* docs: use correct mpu9250 i2c_bus (#6064)Thijs Triemstra2023-02-201-1/+1
* ar100: Support for ar100 (#6054)Elias Bakken2023-02-202-0/+23
* docs: Fix typos (#6032)Thijs Triemstra2023-02-2010-37/+37
* stepper_enable: report statusPedro Lamas2023-02-131-0/+6
* extruder: store currently sync'ed motion queue namePedro Lamas2023-02-091-0/+3
* docs: Fix 'screw_thread' explanation in 'screws_tilt_adjust' section. (#6039)Bassam Husain2023-02-091-5/+5
* docs: Fixed wording in 'Bed_Mesh.md', fade_target section. (#6025)Bassam Husain2023-02-031-2/+2
* screws_tilt_adjust: status result as dictionaryPedro Lamas2023-02-032-6/+8
* docs: note change to bed_mesh profile behaviorEric Callahan2023-02-012-0/+25
* docs: update RPi_microcontroller.md to systemdStefan Dej2023-01-171-2/+2
* docs: Improve SET_PIN documentation in G-Codes.mdKevin O'Connor2023-01-131-3/+11
* docs: Note v0.11.0 release in Config_Changes.mdKevin O'Connor2023-01-041-0/+3
* spi_flash: Add SKR2 F429 chip variant to spi_flash (#5956)JamesH19782023-01-041-0/+4
* docs: Fix typo in mpu9250 documentationCODeRUS2022-12-301-1/+1
* tmc: Configurable microstep lookup table (#5920)Alex Voinea2022-12-211-0/+48
* screws_tilt_adjust: Add get_status() method (#5921)theophile2022-12-171-0/+22
* gcode_arcs: support XY, XZ and YZ planesAndrew Mirsky2022-12-111-2/+3
* docs: Note the release of v0.11.0Kevin O'Connor2022-11-281-0/+25
* docs: Add a note about hardware independence to Features.mdKevin O'Connor2022-11-281-1/+8
* docs: Updates to Features.mdKevin O'Connor2022-11-281-6/+11
* docs: Minor update to safe_z_home change description in Config_Changes.mdKevin O'Connor2022-11-221-2/+2
* safe_z_home: Fix final z hop to use relative z coordinates (#5879)redstone992022-11-221-0/+6
* mpu9250: add MPU6500 (#5767)Yifei Ding2022-11-194-14/+92
* docs: Update Contacts.md with improved github issue tracker descriptionKevin O'Connor2022-11-151-39/+31
* docs: Add a note about fixing underlying bugs in CONTRIBUTING.mdKevin O'Connor2022-10-251-0/+4
* docs: Add step rate benchmark for stm32h7D4SK2022-10-212-0/+21
* atsamd: Add support CANbus on ATSAME5x chipsKevin O'Connor2022-10-131-2/+2
* print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to K...Stefan Dej2022-10-052-2/+18
* z_thermal_adjust: Add Z thermal adjuster module (#4157)alchemyEngine2022-09-253-0/+70
* docs: Add an example corexy homing macro to TMC_Drivers.mdKevin O'Connor2022-09-141-0/+17
* docs: Reword sensorless homing high sensitivity test in TMC_Drivers.mdKevin O'Connor2022-09-141-4/+5
* docs: Add SDIO programming and split verification details to SDCard_UpdatesDonna Whisnant2022-09-111-6/+114
* fan: add enable_pin option (#5732)dalegaard2022-09-031-0/+10
* mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737)jake-b2022-09-021-0/+14
* kinematics: Add deltesian printers (#5743)Tircown2022-09-011-2/+76
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-02 07:19:52 +0000