diff options
| author | Stefan Dej <meteyou@gmail.com> | 2022-10-05 21:02:28 +0200 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2022-10-05 15:02:28 -0400 |
| commit | b0ffb269d2ac8dc19ae6879d80718b8c60ab60de (patch) | |
| tree | 5cbe91c7c1ba712a8b5ebcd20565e80f7514f566 /docs | |
| parent | a2482d4f952e0ffd908e4381cae9e45ab1148773 (diff) | |
| download | kutter-b0ffb269d2ac8dc19ae6879d80718b8c60ab60de.tar.gz kutter-b0ffb269d2ac8dc19ae6879d80718b8c60ab60de.tar.xz kutter-b0ffb269d2ac8dc19ae6879d80718b8c60ab60de.zip | |
print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to Klipper (#5726)
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 12 | ||||
| -rw-r--r-- | docs/Status_Reference.md | 8 |
2 files changed, 18 insertions, 2 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 3e4e177f..d9cefd80 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -888,6 +888,18 @@ the paused state is fresh for each print. #### CANCEL_PRINT `CANCEL_PRINT`: Cancels the current print. +### [print_stats] + +The print_stats module is automatically loaded. + +#### SET_PRINT_STATS_INFO +`SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>] [CURRENT_LAYER= +<current_layer>]`: Pass slicer info like layer act and total to Klipper. +Add `SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>]` to your +slicer start gcode section and `SET_PRINT_STATS_INFO [CURRENT_LAYER= +<current_layer>]` at the layer change gcode section to pass layer +information from your slicer to Klipper. + ### [probe] The following commands are available when a diff --git a/docs/Status_Reference.md b/docs/Status_Reference.md index 99d4f0f3..e6595ddb 100644 --- a/docs/Status_Reference.md +++ b/docs/Status_Reference.md @@ -330,8 +330,12 @@ The following information is available in the `print_stats` object [virtual_sdcard](Config_Reference.md#virtual_sdcard) config section is defined): - `filename`, `total_duration`, `print_duration`, `filament_used`, - `state`, `message`: Estimated information about the current print - when a virtual_sdcard print is active. + `state`, `message`: Estimated information about the current print when a + virtual_sdcard print is active. +- `info.total_layer`: The total layer value of the last `SET_PRINT_STATS_INFO + TOTAL_LAYER=<value>` G-Code command. +- `info.current_layer`: The current layer value of the last + `SET_PRINT_STATS_INFO CURRENT_LAYER=<value>` G-Code command. ## probe |