aboutsummaryrefslogtreecommitdiffstats
path: root/src
Commit message (Expand)AuthorAgeFilesLines
* stm32: Add support for 48KiB bootloadersKevin O'Connor2021-02-201-0/+3
* stm32: Optimize stm32f401 peripheral clockKevin O'Connor2021-02-191-2/+6
* stm32: stm32f401 pll_freq updatesArkadiusz Raj2021-02-191-2/+3
* stm32: 25MHz clock fixesArkadiusz Raj2021-02-191-1/+2
* stm32: Fix missing STM32F429 clock initializationArkadiusz Raj2021-02-191-2/+3
* stm32: F429 shall use 168Mhz to allow easy USB clock configurationArkadiusz Raj2021-02-191-2/+2
* stm32: Add STM32F429 variant (#3926)Arek2021-02-182-9/+22
* stm32: Add support for spi bus on stm32f407 pins PI2,PI3,PI1Kevin O'Connor2021-02-121-0/+5
* stm32: Minor indention change to spi.cKevin O'Connor2021-02-121-10/+10
* pru: Request the host not send more than 496 bytes to the pruKevin O'Connor2021-02-121-0/+3
* canbus: Call can_notify_rx() at startup so low-level code does not need toKevin O'Connor2021-02-092-3/+1
* canbus: Rename canbus_set_dataport() to canbus_set_filter() and simplifyKevin O'Connor2021-02-093-13/+8
* stm32: Adding support for STM32F031x6 (#3871)Elias Bakken2021-02-033-7/+22
* canbus: Move high-level CAN code to new src/generic/canbus.cKevin O'Connor2021-02-026-192/+323
* stm32: Simplify can.c irq handlerKevin O'Connor2021-02-021-127/+130
* stm32: Use CAN_TSR_CODE to select next tx fifo in can.cKevin O'Connor2021-02-021-6/+2
* stm32: Avoid read+write modify instructions in can.cKevin O'Connor2021-02-021-24/+13
* stm32: Introduce new can_set_filter() helper function in can.cKevin O'Connor2021-02-021-40/+32
* stm32: Update can.c to use more consistent indentationKevin O'Connor2021-02-021-146/+143
* ds18b20: new module for 1-wire temperature sensor (#3462)Alan Lord2021-02-022-1/+276
* atsamd: Fix bug in sercom_pads mapping on samd21 in sercom.cKevin O'Connor2021-02-011-1/+1
* stm32: Support for STM32F401 (#3853)smark-2021-01-313-9/+17
* stm32f1: Fix for using 16MHz external crystal (#3814)Matt Shepcar2021-01-241-2/+7
* stm32: Support setting the stm32f0 internal clock trim valueKevin O'Connor2021-01-182-1/+11
* stm32: Add support for spi4 bus on stm32f446 chipKevin O'Connor2021-01-041-0/+7
* gpiocmds: Merge digital output and soft pwm codeKevin O'Connor2020-12-101-233/+119
* stm32: Only use the HSI48 clock when doing "usb clock recovery"Kevin O'Connor2020-12-081-1/+2
* pca9685: Use move queue for pwm updatesKevin O'Connor2020-12-041-13/+58
* gpiocmds: Use move queue for software pwmKevin O'Connor2020-12-041-41/+78
* gpiocmds: Use move queue for digital output pinsPascal Pieper2020-12-041-11/+57
* pwmcmds: Use move queue for hard PWMPascal Pieper2020-12-041-11/+56
* stepper: Use a reusable interface to the "move queue"Kevin O'Connor2020-12-043-31/+81
* basecmd: Change "move queue empty" error to "move queue overflow"Kevin O'Connor2020-12-041-1/+1
* gpiocmds: Send soft pwm cycle_time separately from schedule_soft_pwm_outKevin O'Connor2020-12-041-11/+22
* pru: Disable gpio mux configuration codeKevin O'Connor2020-12-041-9/+19
* neopixel: Fix neopixel_result message so that it contains an oidKevin O'Connor2020-11-051-1/+1
* command: Fix handling of buffer passing in args[] on 64bit mcuKevin O'Connor2020-10-304-0/+17
* command: Add command_decode_ptr() helperKevin O'Connor2020-10-3010-30/+38
* neopixel: Increase the maximum LED chain lengthKevin O'Connor2020-10-291-15/+33
* atsamd: Support reading chip based temperature sensorKevin O'Connor2020-10-291-1/+15
* stm32: Support reading chip based temperature sensor on stm32f0Kevin O'Connor2020-10-291-2/+10
* stm32: Reduce adc_pins storage size in stm32f0_adc.cKevin O'Connor2020-10-291-19/+7
* stm32: Support reading chip based temperature sensor on stm32f1/2/4Kevin O'Connor2020-10-291-5/+24
* atsam: Support reading chip based temperature sensor on sam4eKevin O'Connor2020-10-291-1/+5
* atsam: Support reading chip based temperature sensor on sam3/sam4sKevin O'Connor2020-10-291-5/+13
* linux: Fix spi handling with more than one spi deviceKevin O'Connor2020-10-251-0/+1
* stm32: Don't default to HID bootloader in KconfigKevin O'Connor2020-10-131-6/+8
* stm32: Fixed CAN bus for STM32F4, there were syntax errors that prevented com...bondus2020-10-111-3/+3
* gpiocmds: Add soft-pwm frequency modulation supportGuy Shapira2020-09-261-10/+9
* sensor_adxl345: Remove unused stop_time parameterKevin O'Connor2020-09-051-1/+1
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-01 22:50:17 +0000