aboutsummaryrefslogtreecommitdiffstats
path: root/docs/Config_Changes.md
Commit message (Expand)AuthorAgeFilesLines
* temperature_fan: Remove deprecated pid_integral_max optionKevin O'Connor2022-04-071-0/+3
* pca9632: Add support for configurable color_orderKevin O'Connor2022-04-071-0/+4
* docs: Note change to neopixel/dotstar API status fieldsKevin O'Connor2022-03-311-0/+6
* display_status: stops M73 from setting progress to 0 if P missingPedro Lamas2022-03-081-0/+2
* extruder_stepper: Do not default to synching with "extruder" at startupKevin O'Connor2022-03-041-0/+6
* extruder: Deprecate old extruder commands and shared_heater config optionKevin O'Connor2022-02-101-0/+12
* tmc2130: Rework current selection to prefer vsense=1Kevin O'Connor2022-01-161-0/+6
* scripts: Migrated shaper calibration scripts to Python3Dmitry Butyugin2021-12-301-0/+10
* stepper: Support step_pulse_duration even on TMC drivers in UART/SPI modeKevin O'Connor2021-11-291-3/+4
* docs: Rename DocumentsYifei Ding2021-11-221-1/+1
* docs: Expand on default_parameter_X conversion in Config_Changes.mdKevin O'Connor2021-11-161-3/+5
* temperature_sensors: Deprecate "NTC 100K beta 3950" thermistorKevin O'Connor2021-11-101-0/+7
* stepper: Make step pulse duration customizable at run-timeKevin O'Connor2021-11-041-0/+5
* docs: Note removal of deprecated features in Config_Changes.mdKevin O'Connor2021-11-021-0/+11
* heaters: Change default smooth_time from 2 seconds to 1 secondKevin O'Connor2021-09-031-0/+4
* adxl345: Change default chip name from "default" to "adxl345"Kevin O'Connor2021-08-301-0/+4
* adxl345: Move g-code commands to new helper classKevin O'Connor2021-08-301-0/+4
* docs: Note config list change to Config_Changes.mdKevin O'Connor2021-08-211-0/+4
* homing: Calculate homing position based on trigger timeKevin O'Connor2021-08-171-0/+6
* docs: Don't use section-index plugin during klipper3d.org site generationKevin O'Connor2021-08-171-1/+1
* avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3Kevin O'Connor2021-08-141-0/+3
* docs : make modifications to all md files to make them compatible with mkdocsDamien2021-07-271-1/+3
* controller_fan: Minor updatesKevin O'Connor2021-07-201-0/+5
* samd_sercom: Specify the sercom explicitly in a config optionKevin O'Connor2021-07-041-0/+3
* docs: Deprecate pid_integral_max config optionKevin O'Connor2021-06-121-0/+4
* docs: Avoid link descriptions that span multiple linesKevin O'Connor2021-05-281-4/+5
* gcode_macro: Deprecate default_parameter_<name>Kevin O'Connor2021-05-031-0/+6
* toolhead: Do not limit SET_VELOCITY_LIMIT to values specified in configKevin O'Connor2021-04-301-0/+4
* docs: Deprecate support for the pin_map config optionKevin O'Connor2021-03-251-0/+5
* docs: Update CAN bus documentsKevin O'Connor2021-03-131-0/+5
* tmc2660: Do not enable SFILT by defaultKevin O'Connor2021-03-101-0/+3
* tmc: Add support for periodic checking of driver statusKevin O'Connor2021-02-271-0/+5
* Revert "bme280: Rename sensor_type from BME280 to bme280"Kevin O'Connor2021-02-201-3/+0
* bme280: Rename sensor_type from BME280 to bme280Kevin O'Connor2021-02-201-0/+3
* temperature_host: Rename "path" config to "sensor_path"Kevin O'Connor2021-02-201-3/+4
* temperature_host: Rename rpi_temperature and add support for custom pathsEvgenii2021-02-191-0/+6
* resonance_tester: Disable input shaping for resonance testingDmitry Butyugin2021-02-021-0/+5
* adxl345: Add accelerometer chip name to the raw data file nameDmitry Butyugin2021-02-021-0/+4
* docs: Note step_distance deprecated in Config_Changes.mdKevin O'Connor2020-12-221-2/+8
* endstop_phase: Obtain phases directly from stepper microsteps configKevin O'Connor2020-12-181-0/+5
* stepper: Calculate step_distance from rotation_distanceKevin O'Connor2020-12-181-0/+6
* docs: Fix board_pins link in Config_Changes.mdKevin O'Connor2020-12-131-1/+1
* manual_probe: Use configfile note_valid=False when inspecting Z position_endstopKevin O'Connor2020-12-131-0/+5
* board_pins: Use an explicit parameter to specify mcu name(s)Kevin O'Connor2020-11-201-0/+6
* docs: Note the change in "print_stats.duration"Arksine2020-11-131-0/+4
* neopixel: Add support for RGBW LEDsKevin O'Connor2020-10-291-0/+4
* mcu: Don't default serial config option to /dev/ttyS0Kevin O'Connor2020-10-281-0/+4
* docs: Update release notes for v0.9.0 releaseKevin O'Connor2020-10-201-0/+2
* spi_temperature: fix MAX31865 temperature conversion (#3274)Adrian Keet2020-09-021-0/+4
* gcode: Split G0/G1 command handling to new gcode_move classKevin O'Connor2020-08-201-0/+5
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-02 11:59:27 +0000