aboutsummaryrefslogtreecommitdiffstats
path: root/docs/Config_Changes.md
Commit message (Expand)AuthorAgeFilesLines
* idex_modes: Fixed the case when carriages home in the same direction (#6310)Dmitry Butyugin2023-09-291-0/+9
* docs: Update Config_Changes.md to reflect new SKR-3 flash-sdcard naming.Donna Whisnant2023-08-111-0/+4
* idex_modes: COPY and MIRROR mode implementation (#6297)Dmitry Butyugin2023-08-011-0/+5
* docs: note rri deprecation in config_changesEric Callahan2023-06-201-0/+7
* tmc: Configurable `multistep_filt`Alex Voinea2023-06-161-0/+3
* Kconfig: Change default CANbus frequency to 1000000Kevin O'Connor2023-05-301-0/+6
* docs: Minor update to Config_Changes.md datesKevin O'Connor2023-05-251-2/+2
* resonance_tester: Apply input shaper params on SHAPER_CALIBRATEDmitry Butyugin2023-05-251-0/+3
* serialqueue: Rename stalled_bytes stat to upcoming_bytesKevin O'Connor2023-04-071-0/+3
* tmc5160: allow changing the globalscaler at runtimeAlex Voinea2023-03-071-0/+8
* screws_tilt_adjust: status result as dictionaryPedro Lamas2023-02-031-0/+5
* docs: note change to bed_mesh profile behaviorEric Callahan2023-02-011-0/+5
* docs: Note v0.11.0 release in Config_Changes.mdKevin O'Connor2023-01-041-0/+3
* spi_flash: Add SKR2 F429 chip variant to spi_flash (#5956)JamesH19782023-01-041-0/+4
* docs: Minor update to safe_z_home change description in Config_Changes.mdKevin O'Connor2022-11-221-2/+2
* safe_z_home: Fix final z hop to use relative z coordinates (#5879)redstone992022-11-221-0/+6
* flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader modeKevin O'Connor2022-06-161-0/+4
* rp2040: Implement workaround for USB errata "rp2040-e5"Kevin O'Connor2022-06-121-0/+6
* temperature_fan: Remove deprecated pid_integral_max optionKevin O'Connor2022-04-071-0/+3
* pca9632: Add support for configurable color_orderKevin O'Connor2022-04-071-0/+4
* docs: Note change to neopixel/dotstar API status fieldsKevin O'Connor2022-03-311-0/+6
* display_status: stops M73 from setting progress to 0 if P missingPedro Lamas2022-03-081-0/+2
* extruder_stepper: Do not default to synching with "extruder" at startupKevin O'Connor2022-03-041-0/+6
* extruder: Deprecate old extruder commands and shared_heater config optionKevin O'Connor2022-02-101-0/+12
* tmc2130: Rework current selection to prefer vsense=1Kevin O'Connor2022-01-161-0/+6
* scripts: Migrated shaper calibration scripts to Python3Dmitry Butyugin2021-12-301-0/+10
* stepper: Support step_pulse_duration even on TMC drivers in UART/SPI modeKevin O'Connor2021-11-291-3/+4
* docs: Rename DocumentsYifei Ding2021-11-221-1/+1
* docs: Expand on default_parameter_X conversion in Config_Changes.mdKevin O'Connor2021-11-161-3/+5
* temperature_sensors: Deprecate "NTC 100K beta 3950" thermistorKevin O'Connor2021-11-101-0/+7
* stepper: Make step pulse duration customizable at run-timeKevin O'Connor2021-11-041-0/+5
* docs: Note removal of deprecated features in Config_Changes.mdKevin O'Connor2021-11-021-0/+11
* heaters: Change default smooth_time from 2 seconds to 1 secondKevin O'Connor2021-09-031-0/+4
* adxl345: Change default chip name from "default" to "adxl345"Kevin O'Connor2021-08-301-0/+4
* adxl345: Move g-code commands to new helper classKevin O'Connor2021-08-301-0/+4
* docs: Note config list change to Config_Changes.mdKevin O'Connor2021-08-211-0/+4
* homing: Calculate homing position based on trigger timeKevin O'Connor2021-08-171-0/+6
* docs: Don't use section-index plugin during klipper3d.org site generationKevin O'Connor2021-08-171-1/+1
* avr: Rename the analog-only PE0/PE1 pins on atmega168/328 to PE2/PE3Kevin O'Connor2021-08-141-0/+3
* docs : make modifications to all md files to make them compatible with mkdocsDamien2021-07-271-1/+3
* controller_fan: Minor updatesKevin O'Connor2021-07-201-0/+5
* samd_sercom: Specify the sercom explicitly in a config optionKevin O'Connor2021-07-041-0/+3
* docs: Deprecate pid_integral_max config optionKevin O'Connor2021-06-121-0/+4
* docs: Avoid link descriptions that span multiple linesKevin O'Connor2021-05-281-4/+5
* gcode_macro: Deprecate default_parameter_<name>Kevin O'Connor2021-05-031-0/+6
* toolhead: Do not limit SET_VELOCITY_LIMIT to values specified in configKevin O'Connor2021-04-301-0/+4
* docs: Deprecate support for the pin_map config optionKevin O'Connor2021-03-251-0/+5
* docs: Update CAN bus documentsKevin O'Connor2021-03-131-0/+5
* tmc2660: Do not enable SFILT by defaultKevin O'Connor2021-03-101-0/+3
* tmc: Add support for periodic checking of driver statusKevin O'Connor2021-02-271-0/+5
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-02 03:11:23 +0000