aboutsummaryrefslogtreecommitdiffstats
path: root/config
Commit message (Collapse)AuthorAgeFilesLines
* config: Update generic-bigtreetech-skr-2.cfg - SPI Drivers (#6895)JamesH19782025-04-161-0/+45
| | | | | Added SPI tmc2130 driver config Signed-off-by: James Hartley <james@hartleyns.com>
* config: Add LED definitions to generic-bigtreetech-skr-mini-mz.cfgKevin O'Connor2025-03-241-0/+6
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Update generic-creality-v4.2.7.cfg (#6790)John2025-01-241-1/+1
| | | | | Corrected Filament Runout Sensor Pin (as per schematic - see https://github.com/LeeOtts/Ender3v2-Klipper-Configs/blob/main/Creality.4.2.7.-.Schematic.28-5-22-1.pdf ) Signed-off-by: John Minor <theminor@duck.com>
* config: Config for Geeetech A-series printers: A10/M/T and A20/M/T (#6767)Alexander Bazarov2025-01-031-0/+256
| | | | | | | | | | | | Based on few configs found on the discourse forum, facebook groups. In addition, using official schematics from: https://www.geeetech.com/download.html https://github.com/Geeetech3D/Diagram/files/8199212/GT2560V4.1BSCHA20T.pdf Contains macros for filament mixing based on: https://klipper.discourse.group/t/mixing-color-support/2246/12 https://klipper.discourse.group/t/mixing-hotend-m163-emulation/11423/2 Signed-off-by: Alexander Bazarov <oss@bazarov.dev>
* config: Add lis3dh to Duet3D 1LC sample configWulfsta2024-11-121-0/+9
| | | | Signed-off-by: Luke Vuksta <wulfstawulfsta@gmail.com>
* config: Added board config for Mellow Fly E3 v2 (#6682)Lieven Vanhercke2024-11-061-0/+232
| | | Signed-off-by: Lieven Vanhercke <lieven.vanh@gmail.com>
* config: Update generic-bigtreetech-skr-mini-e3-v3.0.cfg (#6654)Miles Pawar2024-07-261-2/+1
| | | | | | | | - Removed stealth from Extruder to stop under extrusion issues - Changed Bed sensor to correct one for Ender 3 * Update generic-bigtreetech-skr-mini-e3-v3.0.cfg Signed-off-by: Miles Pawar <slab.paged-0p@icloud.com>
* config: Adds support for the Tronxy Crux1 printer (#6627)elmo2024-06-271-0/+138
| | | Signed-off-by: Louis West <lowest@mailbox.org>
* config: Add Artillery Genius Pro config (#6604)Jayofelony2024-05-271-0/+126
| | | Signed-off-by: Jeroen Oudshoorn <oudshoorn.jeroen@gmail.com>
* config: Add safe_z_home section for Creality CR-6 SEStéphane Lepin2024-05-122-0/+8
| | | | | | | The Creality CR-6 SE has a strain gauge on its hotend used for z-probing and homing. Currently, running G28 to home all axes puts the hotend just outside of the print bed and thus assumes a wrong homing point for the Z axis. This change aims to address this issue by setting a safe Z-homing point (in the middle of the print bed) into the Creality CR-6 SE 2020 and 2021-revision config files. Signed-off-by: Stéphane Lepin <stephane.lepin@gmail.com>
* config: Artillery Sidewinder X3 (#6534)TheFeralEngineer2024-04-121-0/+188
| | | Signed-off-by: Phil Timpson <theferalengineer@gmail.com>
* toolhead: Replace max_accel_to_decel with minimum_cruise_ratioKevin O'Connor2024-03-132-2/+1
| | | | | | | | | The user facing max_accel_to_decel setting is complicated and confusing. Replace it with a new minimum_cruise_ratio parameter. Internally this user-facing parameter will calculate the existing low-level "accel_to_decel" mechanism. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: "static_value" in [output_pin enable_pin] is deprecated (#6520)Ulf D2024-03-081-1/+1
| | | Signed-off-by: Ulf Dieckmann <1coderookie@quantentunnel.de>
* config: update Kobra Plus build instructions and fan settingsDerek Kaser2024-03-041-2/+2
| | | | Signed-off-by: Derek Kaser <derek.kaser@gmail.com>
* bed_mesh: Remove deprecated relative_reference_indexKevin O'Connor2024-02-151-1/+0
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* extruder: Remove deprecated commands and configKevin O'Connor2024-02-151-8/+4
| | | | | | | | Remove the deprecated SET_EXTRUDER_STEP_DISTANCE and SYNC_STEPPER_TO_EXTRUDER commands. Remove the deprecated shared_heater config option. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* pwm_cycle_time: New module for output pins with dynamic cycle timesKevin O'Connor2024-01-231-3/+1
| | | | | | | | | Remove support for changing the cycle time of pwm pins from the output_pin module. Use a new pwm_cycle_time module that supports setting dynamic cycle times. This simplifies the output_pin code and low-level pin update code. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* output_pin: Deprecate static_value parameterKevin O'Connor2024-01-236-17/+16
| | | | | | | | | | | | Remove support for configuring "static" pins in output_pin module. A "static" pin only saves a few bytes of memory in the micro-controller. The savings does not justify the increased code complexity. Deprecate the static_value parameter to warn users. In the interim, a static_value parameter will set both value and shutdown_value parameters. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Add Creality Ender 5 S1. (#6455)grnbrg2024-01-181-0/+170
| | | | | | | | | | Creality released the Ender 5 S1 model in November of 2022. It has enough hardware differences from the previous models that that the existing Ender 5 configs are not compatible. This configuration is based on one provided by Creality that was then tweaked and modified. I have been using these values (plus some additional entries) for about 6 months with no issues. Signed-off-by: Brian Greenberg <grnbrg@grnbrg.org>
* config: I3DBEEZ9 New board (#6447)I3DBeeTech2024-01-021-0/+223
| | | Signed-off-by: Venkata Kamesh <i3dbee@gmail.com>
* config: Update printer-sovol-sv06-2022.cfg x_offset (#6417)Bassam2023-12-061-1/+1
| | | Signed-off-by: Bassam Husain <bassamanator.2cj4t@simplelogin.com>
* config: Update printer-sovol-sv06-2022.cfg to stock (#6416)Bassam2023-12-061-3/+3
| | | | | This printer is advertised as having a `220*220*250mm build volume`. Signed-off-by: Bassam Husain <bassamanator.2cj4t@simplelogin.com>
* config: Add LDO Leviathan v1.2 generic configStefan Dej2023-12-061-0/+241
| | | | Signed-off-by: Stefan Dej <meteyou@gmail.com>
* pwm_tool: Add support for high-speed PWM pin updatesKevin O'Connor2023-11-161-6/+5
| | | | | | | | | The output_pin module is only capable of updating an output pin at most once every 100ms. Add a new pwm_tool module that is capable of queuing updates in the micro-controller and thus allowing for much higher update rates. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Update printer-sovol-sv06-plus-2023.cfg (#6401)Herb McNew2023-11-161-2/+2
| | | | | In testing with a user on Discord we discovered the sensorless homing thresholds were out of line with what Sovol ships with Marlin. This aligns with their settings. Signed-off-by: Herb McNew <herb.mcnew@gmail.com>
* config: Add Sovol SV06 Plus (#6397)Herb McNew2023-11-141-0/+147
| | | | | | | | | New configuration for the Sovol SV06 Plus Initial pass at adding a printer configuration for the Sovol SV06 Plus based on the existing Sovol SV06 config. Updated for the larger build volume, added filament runout sensor, and removed any references to the LCD screen since the stock screen doesn't work with Klipper. Signed-off-by: Herb McNew <herb.mcnew@gmail.com>
* config: Update generic-bigtreetech-skr-pico-v1.0.cfg (#6376)Wayne Manion2023-11-021-0/+3
| | | | | Add RP2040 internal temperature sensor Signed-off-by: Wayne Manion <treowayne@gmail.com>
* config: Add new generic-bigtreetech-octopus-pro-v1.1.cfg configKevin O'Connor2023-10-301-0/+285
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Clarify stepper enable comment in Octopus boardsKevin O'Connor2023-10-302-2/+2
| | | | | | Make sure the stepper enable_pin comment shows an inverted pin. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Split generic-bigtreetech-octopus.cfg into separate filesKevin O'Connor2023-10-302-8/+301
| | | | | | | | Use two different files for the Octopus Pro and Octopus (non-Pro). The configs are the same in practice, but the difference in version and naming can lead to confusion. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Fix trailing space in printer-creality-ender5-2019.cfgKevin O'Connor2023-10-091-1/+1
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* config: Update printer-creality-ender5-2019.cfg to add instructions for ↵ghostoverflow2562023-10-091-1/+5
| | | | | | | silent boards (#6326) Recently tested on my ender 5 pro that came from creality with a v1.1.5 board. Works. Tested all endstops, motors, and heaters. Signed-off-by: Jake Aronleigh <jakestar98@outlook.com>
* config: Add MKS Monster 8 generic config (#6336)Bomberski2023-09-101-0/+268
| | | Signed-off-by: Allen Cox <Bomberski420@gmail.com>
* config: Add HC32F460 variant of Ender 2 Pro (#6334)JamesH19782023-09-101-0/+95
| | | | | | | PR to add the newer version of the Ender 2 Pro with the CR-FDM-v2.5.54.170 motherboard with the HC3232F460 chip. Confirmed as working with discord member NyftHeart and using configs from Steve Gotthardt, with his permission to use and submit. Signed-off-by: James Hartley <james@hartleyns.com>
* config: Add 1LC example configuration and docsWulfsta2023-08-131-0/+81
| | | | Signed-off-by: Luke Vuksta <wulfstawulfsta@gmail.com>
* config: Add config for printer Creality CR10s Pro V2 (#6300)flatline-842023-08-131-0/+154
| | | | | | | Created a base config for the Creality CR10s Pro v2 as described here: https://www.creality.com/products/cr-10s-pro-v2-3d-printer This will allow users with this printer to more easily setup Klipper firmware. Signed-off-by: Peter Kydas <peter@kydas.me>
* idex_modes: COPY and MIRROR mode implementation (#6297)Dmitry Butyugin2023-08-011-0/+36
| | | | | | | | | | | COPY and MIRROR mode implementation Correctly apply input shaper params to new dual_carriage Added SAVE_/RESTORE_IDEX_STATE commands Documentation updates for the new IDEX modes Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
* config: Update Octopus Max EZ for wrong bltouch pins (#6283)JamesH19782023-07-161-2/+2
| | | | | | | It has been discovered on the discord by the user Pizn that the blouch pins are swapped in this config and don't include the ^ pull on the sensor pin. This has been tested and confirmed by the user. Signed-off-by: James Hartley <james@hartleyns.com>
* config: Updated bed mesh configuration for Creality Ender 3 S1 and S1 Pro ↵Aleksandr 'Aux' Ivanov2023-07-091-2/+2
| | | | | | | | | (#6219) Existing `mesh_min` values start probing too far away from the edge. Additionally `mesh_max` Y value of 197 is out of bed movement range (197 + `bltouch.y_offset` = 237.5) and causes Y stepper to overhit, which can potentially damage the printer in the long run. Signed-off-by: Aleksandr Ivanov <aux@hexmode.org>
* config: Multiple config - change working for heater fan (#6274)JamesH19782023-06-285-5/+5
| | | | | The reference to `my_nozzle_fan` in these configs could be confusing and misleading, leading users to think it is the parts/print cooling fan, changed to heatbreak_cooling_fan as used in other configs. Signed-off-by: James Hartley <james@hartleyns.com>
* config: remove move_to_previous from Ender 3 S1 configs (#6245)JamesH19782023-06-162-2/+0
| | | | | This PR is to remove `move_to_previous: true` from the ender 3 S1 and S1 plus configs. This is a confusing option, it is not really useful on these type of printers and can cause issue to the end user Signed_off_by; James Hartley <james@hartleyns.com>
* config: Update printer-creality-cr10-smart-pro-2022.cfg (#6253)IronAegis902023-06-161-1/+2
| | | | | Clarified the necessary steps for successfully flashing the firmware to the MCU. Signed-off-by: Doug Whitlock <doug@thewhitlock.family>
* config: Correct year in documentation for ender 3 v2 neoJason W. Thompson2023-06-061-1/+1
| | | | | | The header documentation currently shows the year the Creality Ender 3 V2 Neo as being the 2020 model. This is likely a copy/paste error from the header of the original Creality Ender 3 V2 config. The year the Creality Ender 3 V2 Neo came out was in 2022 as indicated by the name of this config file. This patch fixes the copy/paste typo by updating the year in the header documentation from 2020 to 2022. Signed-off-by: Jason W. Thompson <jason@jasonthompson.dev>
* config: Change the position_max value of Kobra Go to the physic limit (#6200)xpeng2023-05-141-4/+4
| | | | | Fixed the bed_mesh out of range issue Signed-off-by: Yipeng Zhou <yipeng_zhou@foxmail.com>
* stm32f7: add support for stm32f7 and remram boardFrederic Morin2023-05-071-0/+117
| | | | Signed-off-by: Frederic Morin <frederic.morin.8@gmail.com>
* config : Longer LK4 X (#6185)Thomas Lété2023-05-011-0/+118
| | | | | | | New printer : Longer LK4X configuration This configuration is based on the one provided by Longer with some tweaks. Signed-off-by: Thomas Lété <bistory@gmail.com>
* config: Add printer configuration for Anycubic Kobra Go (#6166)xpeng2023-04-151-0/+133
| | | Signed-off-by: Yipeng Zhou <yipeng_zhou@foxmail.com>
* config: SKR3, update for second chip choice (#6153)JamesH19782023-04-071-1/+3
| | | | | | | As found on the discord by user Qtin, this board now ships with one of STM32H743 or STM32H723 Example config updated to reflect this. This has been tested on the users board. To note, the H743 bin will flash to the H723 chip, but will not work. Signed-off-by: James Hartley <james@hartleyns.com>
* config: Update comment header in printer-voxelab-aquila-2021.cfgKevin O'Connor2023-04-071-0/+1
| | | | Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
* stm32: Add support for Nation N32G45x mcus (#6116)Alexey2023-04-071-0/+83
| | | | | N32G452/G455 are mostly compatible with STM32F103 but have M4 core and different ADC. Signed-off-by: Alexey Golyshin <stas2z@gmail.com>
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-01 17:14:24 +0000