output_pin: Deprecate static_value parameter

Remove support for configuring "static" pins in output_pin module.  A
"static" pin only saves a few bytes of memory in the micro-controller.
The savings does not justify the increased code complexity.

Deprecate the static_value parameter to warn users.  In the interim, a
static_value parameter will set both value and shutdown_value
parameters.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

6 files changed, 16 insertions, 17 deletions

diff --git a/config/generic-mini-rambo.cfg b/config/generic-mini-rambo.cfg
index 61e2ac84..1a616cf8 100644
--- a/config/generic-mini-rambo.cfg
+++ b/config/generic-mini-rambo.cfg
@@ -84,7 +84,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.3
+value: 1.3
 
 [output_pin stepper_z_current]
 pin: PL4
@@ -92,7 +92,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.3
+value: 1.3
 
 [output_pin stepper_e_current]
 pin: PL5
@@ -100,7 +100,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.25
+value: 1.25
 
 [static_digital_output stepper_config]
 pins:
diff --git a/config/generic-ultimaker-ultimainboard-v2.cfg b/config/generic-ultimaker-ultimainboard-v2.cfg
index 9a4d4e6d..b1ce3fa5 100644
--- a/config/generic-ultimaker-ultimainboard-v2.cfg
+++ b/config/generic-ultimaker-ultimainboard-v2.cfg
@@ -97,7 +97,7 @@ max_z_accel: 30
 
 [output_pin case_light]
 pin: PH5
-static_value: 1.0
+value: 1.0
 
 # Motor current settings.
 [output_pin stepper_xy_current]
@@ -107,7 +107,7 @@ scale: 2.000
 # Max power setting.
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.200
+value: 1.200
 # Power adjustment setting.
 
 [output_pin stepper_z_current]
@@ -116,7 +116,7 @@ pwm: True
 scale: 2.000
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.200
+value: 1.200
 
 [output_pin stepper_e_current]
 pin: PL3
@@ -124,4 +124,4 @@ pwm: True
 scale: 2.000
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.250
+value: 1.250
diff --git a/config/printer-adimlab-2018.cfg b/config/printer-adimlab-2018.cfg
index 2f02173d..d810e9d7 100644
--- a/config/printer-adimlab-2018.cfg
+++ b/config/printer-adimlab-2018.cfg
@@ -89,7 +89,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.3
+value: 1.3
 
 [output_pin stepper_z_current]
 pin: PL4
@@ -97,7 +97,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.3
+value: 1.3
 
 [output_pin stepper_e_current]
 pin: PL3
@@ -105,7 +105,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.25
+value: 1.25
 
 [display]
 lcd_type: st7920
diff --git a/config/printer-creality-cr30-2021.cfg b/config/printer-creality-cr30-2021.cfg
index de946920..1edc7531 100644
--- a/config/printer-creality-cr30-2021.cfg
+++ b/config/printer-creality-cr30-2021.cfg
@@ -98,7 +98,6 @@ max_temp: 100
 
 [output_pin led]
 pin: PC14
-static_value: 0
 
 # Neopixel LED support
 # [neopixel led_neopixel]
diff --git a/config/printer-lulzbot-mini1-2016.cfg b/config/printer-lulzbot-mini1-2016.cfg
index 9be60cbd..52b8061e 100644
--- a/config/printer-lulzbot-mini1-2016.cfg
+++ b/config/printer-lulzbot-mini1-2016.cfg
@@ -125,7 +125,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.300
+value: 1.300
 
 [output_pin stepper_z_current]
 pin: PL4
@@ -133,7 +133,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.630
+value: 1.630
 
 [output_pin stepper_e_current]
 pin: PL5
@@ -141,7 +141,7 @@ pwm: True
 scale: 2.0
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.250
+value: 1.250
 
 [static_digital_output stepper_config]
 # Microstepping pins
diff --git a/config/printer-wanhao-duplicator-6-2016.cfg b/config/printer-wanhao-duplicator-6-2016.cfg
index b1d35fae..de8a3de8 100644
--- a/config/printer-wanhao-duplicator-6-2016.cfg
+++ b/config/printer-wanhao-duplicator-6-2016.cfg
@@ -86,7 +86,7 @@ pwm: True
 scale: 2.782
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.2
+value: 1.2
 
 [output_pin stepper_z_current]
 pin: PL4
@@ -94,7 +94,7 @@ pwm: True
 scale: 2.782
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.2
+value: 1.2
 
 [output_pin stepper_e_current]
 pin: PL3
@@ -102,7 +102,7 @@ pwm: True
 scale: 2.782
 cycle_time: .000030
 hardware_pwm: True
-static_value: 1.0
+value: 1.0
 
 [display]
 lcd_type: ssd1306