diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2017-11-01 21:21:37 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2017-12-08 18:20:04 -0500 |
| commit | f8acf0f54f4e2196b65c29cce8062380609b9b2b (patch) | |
| tree | 781f0f5c36bc850e9abddc88a5048d0578a1a4e6 /klippy/stepper.py | |
| parent | bc5d900e612cf1de25f0b80e9bd5544f9e84576a (diff) | |
| download | kutter-f8acf0f54f4e2196b65c29cce8062380609b9b2b.tar.gz kutter-f8acf0f54f4e2196b65c29cce8062380609b9b2b.tar.xz kutter-f8acf0f54f4e2196b65c29cce8062380609b9b2b.zip | |
delta: Default stepper_b/c position_endstop to stepper_a's
If the position_endstop is not set for stepper_b or stepper_c then use
the value from stepper_a.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/stepper.py')
| -rw-r--r-- | klippy/stepper.py | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/klippy/stepper.py b/klippy/stepper.py index 07798a1d..109d0904 100644 --- a/klippy/stepper.py +++ b/klippy/stepper.py @@ -51,13 +51,17 @@ class PrinterStepper: # Support for stepper controlled linear axis with an endstop class PrinterHomingStepper(PrinterStepper): - def __init__(self, printer, config): + def __init__(self, printer, config, default_position=None): PrinterStepper.__init__(self, printer, config) # Endstop and its position self.mcu_endstop = pins.setup_pin( printer, 'endstop', config.get('endstop_pin')) self.mcu_endstop.add_stepper(self.mcu_stepper) - self.position_endstop = config.getfloat('position_endstop') + if default_position is None: + self.position_endstop = config.getfloat('position_endstop') + else: + self.position_endstop = config.getfloat( + 'position_endstop', default_position) # Axis range self.position_min = config.getfloat('position_min', 0.) self.position_max = config.getfloat( |