diff options
Diffstat (limited to 'src/sam3/sam4e_afec.c')
| -rw-r--r-- | src/sam3/sam4e_afec.c | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/src/sam3/sam4e_afec.c b/src/sam3/sam4e_afec.c new file mode 100644 index 00000000..69205c50 --- /dev/null +++ b/src/sam3/sam4e_afec.c @@ -0,0 +1,206 @@ +// SAM4e8e Analog Front-End Converter (AFEC) support +// +// Copyright (C) 2018 Florian Heilmann <Florian.Heilmann@gmx.net> +// +// This file may be distributed under the terms of the GNU GPLv3 license. + +#include "autoconf.h" // CONFIG_CLOCK_FREQ +#include "command.h" // shutdown +#include "gpio.h" // gpio_adc_setup +#include "internal.h" // GPIO +#include "sam4e.h" // AFEC0 +#include "sched.h" // sched_shutdown + +static const uint8_t afec_pins[] = { + //remove first channel, since it offsets the channel number: GPIO('A', 8), + GPIO('A', 17), GPIO('A', 18), GPIO('A', 19), + GPIO('A', 20), GPIO('B', 0), GPIO('B', 1), GPIO('C', 13), + GPIO('C', 15), GPIO('C', 12), GPIO('C', 29), GPIO('C', 30), + GPIO('C', 31), GPIO('C', 26), GPIO('C', 27), GPIO('C',0), + // AFEC1 + GPIO('B', 2), GPIO('B', 3), GPIO('A', 21), GPIO('A', 22), + GPIO('C', 1), GPIO('C', 2), GPIO('C', 3), GPIO('C', 4), +}; + +#define AFEC1_START 15 // The first 15 pins are on afec0 + +static inline struct gpio_adc +pin_to_gpio_adc(uint8_t pin) +{ + int chan; + for (chan=0; ; chan++) { + if (chan >= ARRAY_SIZE(afec_pins)) + shutdown("Not a valid ADC pin"); + if (afec_pins[chan] == pin) { + break; + } + } + return (struct gpio_adc){ .chan=chan }; +} + +static inline Afec * +gpio_adc_to_afec(struct gpio_adc g) +{ + return (g.chan >= AFEC1_START ? AFEC1 : AFEC0); +} + +static inline uint32_t +gpio_adc_to_afec_chan(struct gpio_adc g) +{ + return (g.chan >= AFEC1_START ? g.chan - AFEC1_START : g.chan); +} + +#define ADC_FREQ_MAX 6000000UL +DECL_CONSTANT(ADC_MAX, 4095); + +static int +init_afec(Afec* afec) { + + // Enable PMC + if (afec == AFEC0) + PMC->PMC_PCER0 = 1 << ID_AFEC0; + else + PMC->PMC_PCER0 = 1 << ID_AFEC1; + + // If busy, return busy + if ((afec->AFE_ISR & AFE_ISR_DRDY) == AFE_ISR_DRDY) { + return -1; + } + + // Reset + afec->AFE_CR = AFE_CR_SWRST; + + // Configure afec + afec->AFE_MR = AFE_MR_ANACH_ALLOWED | \ + AFE_MR_PRESCAL (SystemCoreClock / (2 * ADC_FREQ_MAX) -1) | \ + AFE_MR_SETTLING_AST3 | \ + AFE_MR_TRACKTIM(2) | \ + AFE_MR_TRANSFER(1) | \ + AFE_MR_STARTUP_SUT64; + afec->AFE_EMR = AFE_EMR_TAG | \ + AFE_EMR_RES_NO_AVERAGE | \ + AFE_EMR_STM; + afec->AFE_ACR = AFE_ACR_IBCTL(1); + + // Disable interrupts + afec->AFE_IDR = 0xDF00803F; + + // Disable SW triggering + uint32_t mr = afec->AFE_MR; + + mr &= ~(AFE_MR_TRGSEL_Msk | AFE_MR_TRGEN | AFE_MR_FREERUN_ON); + mr |= AFE_MR_TRGEN_DIS; + afec->AFE_MR = mr; + + return 0; +} + +void +gpio_afec_init(void) { + + while(init_afec(AFEC0) != 0) { + (void)(AFEC0->AFE_LCDR & AFE_LCDR_LDATA_Msk); + } + while(init_afec(AFEC1) != 0) { + (void)(AFEC1->AFE_LCDR & AFE_LCDR_LDATA_Msk); + } + +} +DECL_INIT(gpio_afec_init); + +struct gpio_adc +gpio_adc_setup(uint8_t pin) +{ + struct gpio_adc adc_pin = pin_to_gpio_adc(pin); + Afec *afec = gpio_adc_to_afec(adc_pin); + uint32_t afec_chan = gpio_adc_to_afec_chan(adc_pin); + + //config channel + uint32_t reg = afec->AFE_DIFFR; + reg &= ~(1u << afec_chan); + afec->AFE_DIFFR = reg; + reg = afec->AFE_CGR; + reg &= ~(0x03u << (2 * afec_chan)); + reg |= 1 << (2 * afec_chan); + afec->AFE_CGR = reg; + + // Configure channel + // afec_ch_get_config_defaults(&ch_cfg); + // afec_ch_set_config(afec, afec_chan, &ch_cfg); + // Remove default internal offset from channel + // See Atmel Appnote AT03078 Section 1.5 + afec->AFE_CSELR = afec_chan; + afec->AFE_COCR = (0x800 & AFE_COCR_AOFF_Msk); + + // Enable and calibrate Channel + afec->AFE_CHER = 1 << afec_chan; + + reg = afec->AFE_CHSR; + afec->AFE_CDOR = reg; + afec->AFE_CR = AFE_CR_AUTOCAL; + + return adc_pin; +} + +enum { AFE_DUMMY=0xff }; +uint8_t active_channel = AFE_DUMMY; + +// Try to sample a value. Returns zero if sample ready, otherwise +// returns the number of clock ticks the caller should wait before +// retrying this function. +uint32_t +gpio_adc_sample(struct gpio_adc g) +{ + Afec *afec = gpio_adc_to_afec(g); + uint32_t afec_chan = gpio_adc_to_afec_chan(g); + if (active_channel == g.chan) { + if ((afec->AFE_ISR & AFE_ISR_DRDY) + && (afec->AFE_ISR & (1 << afec_chan))) { + // Sample now ready + return 0; + } else { + // Busy + goto need_delay; + } + } else if (active_channel != AFE_DUMMY) { + goto need_delay; + } + + afec->AFE_CHDR = 0x803F; // Disable all channels + afec->AFE_CHER = 1 << afec_chan; + + active_channel = g.chan; + + for (uint32_t chan = 0; chan < 16; ++chan) + { + if ((afec->AFE_ISR & (1 << chan)) != 0) + { + afec->AFE_CSELR = chan; + (void)(afec->AFE_CDR); + } + } + afec->AFE_CR = AFE_CR_START; + +need_delay: + return ADC_FREQ_MAX * 10000ULL / CONFIG_CLOCK_FREQ; // about 400 mcu clock cycles or 40 afec cycles +} + +// Read a value; use only after gpio_adc_sample() returns zero +uint16_t +gpio_adc_read(struct gpio_adc g) +{ + Afec *afec = gpio_adc_to_afec(g); + uint32_t afec_chan = gpio_adc_to_afec_chan(g); + active_channel = AFE_DUMMY; + afec->AFE_CSELR = afec_chan; + return afec->AFE_CDR; +} + +// Cancel a sample that may have been started with gpio_adc_sample() +void +gpio_adc_cancel_sample(struct gpio_adc g) +{ + if (active_channel == g.chan) { + active_channel = AFE_DUMMY; + } +} |