1 files changed, 51 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2350/hardware/structs/xip_aux.h b/lib/pico-sdk/rp2350/hardware/structs/xip_aux.h
new file mode 100644
index 00000000..1e1caf8c
--- /dev/null
+++ b/lib/pico-sdk/rp2350/hardware/structs/xip_aux.h
@@ -0,0 +1,51 @@
+// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
+
+/**
+ * Copyright (c) 2024 Raspberry Pi Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef _HARDWARE_STRUCTS_XIP_AUX_H
+#define _HARDWARE_STRUCTS_XIP_AUX_H
+
+/**
+ * \file rp2350/xip_aux.h
+ */
+
+#include "hardware/address_mapped.h"
+#include "hardware/regs/xip_aux.h"
+
+// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_xip_aux
+//
+// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
+// _REG_(x) will link to the corresponding register in hardware/regs/xip_aux.h.
+//
+// Bit-field descriptions are of the form:
+// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
+
+typedef struct {
+    _REG_(XIP_AUX_STREAM_OFFSET) // XIP_AUX_STREAM
+    // Read the XIP stream FIFO (fast bus access to XIP_CTRL_STREAM_FIFO)
+    // 0xffffffff [31:0]  STREAM       (0x00000000) 
+    io_ro_32 stream;
+ 
+    _REG_(XIP_AUX_QMI_DIRECT_TX_OFFSET) // XIP_AUX_QMI_DIRECT_TX
+    // Write to the QMI direct-mode TX FIFO (fast bus access to QMI_DIRECT_TX)
+    // 0x00100000 [20]    NOPUSH       (0) Inhibit the RX FIFO push that would correspond to this...
+    // 0x00080000 [19]    OE           (0) Output enable (active-high)
+    // 0x00040000 [18]    DWIDTH       (0) Data width
+    // 0x00030000 [17:16] IWIDTH       (0x0) Configure whether this FIFO record is transferred with...
+    // 0x0000ffff [15:0]  DATA         (0x0000) Data pushed here will be clocked out falling edges of...
+    io_wo_32 qmi_direct_tx;
+ 
+    _REG_(XIP_AUX_QMI_DIRECT_RX_OFFSET) // XIP_AUX_QMI_DIRECT_RX
+    // Read from the QMI direct-mode RX FIFO (fast bus access to QMI_DIRECT_RX)
+    // 0x0000ffff [15:0]  QMI_DIRECT_RX (0x0000) With each byte clocked out on the serial interface, one...
+    io_ro_32 qmi_direct_rx;
+} xip_aux_hw_t;
+
+#define xip_aux_hw ((xip_aux_hw_t *)XIP_AUX_BASE)
+static_assert(sizeof (xip_aux_hw_t) == 0x000c, "");
+
+#endif // _HARDWARE_STRUCTS_XIP_AUX_H
+