1 files changed, 49 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2350/hardware/structs/pads_bank0.h b/lib/pico-sdk/rp2350/hardware/structs/pads_bank0.h
new file mode 100644
index 00000000..bf0f4a53
--- /dev/null
+++ b/lib/pico-sdk/rp2350/hardware/structs/pads_bank0.h
@@ -0,0 +1,49 @@
+// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
+
+/**
+ * Copyright (c) 2024 Raspberry Pi Ltd.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef _HARDWARE_STRUCTS_PADS_BANK0_H
+#define _HARDWARE_STRUCTS_PADS_BANK0_H
+
+/**
+ * \file rp2350/pads_bank0.h
+ */
+
+#include "hardware/address_mapped.h"
+#include "hardware/regs/pads_bank0.h"
+
+// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_pads_bank0
+//
+// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
+// _REG_(x) will link to the corresponding register in hardware/regs/pads_bank0.h.
+//
+// Bit-field descriptions are of the form:
+// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
+
+typedef struct {
+    _REG_(PADS_BANK0_VOLTAGE_SELECT_OFFSET) // PADS_BANK0_VOLTAGE_SELECT
+    // Voltage select
+    // 0x00000001 [0]     VOLTAGE_SELECT (0) 
+    io_rw_32 voltage_select;
+ 
+    // (Description copied from array index 0 register PADS_BANK0_GPIO0 applies similarly to other array indexes)
+    _REG_(PADS_BANK0_GPIO0_OFFSET) // PADS_BANK0_GPIO0
+    // 0x00000100 [8]     ISO          (1) Pad isolation control
+    // 0x00000080 [7]     OD           (0) Output disable
+    // 0x00000040 [6]     IE           (0) Input enable
+    // 0x00000030 [5:4]   DRIVE        (0x1) Drive strength
+    // 0x00000008 [3]     PUE          (0) Pull up enable
+    // 0x00000004 [2]     PDE          (1) Pull down enable
+    // 0x00000002 [1]     SCHMITT      (1) Enable schmitt trigger
+    // 0x00000001 [0]     SLEWFAST     (0) Slew rate control
+    io_rw_32 io[48];
+} pads_bank0_hw_t;
+
+#define pads_bank0_hw ((pads_bank0_hw_t *)PADS_BANK0_BASE)
+static_assert(sizeof (pads_bank0_hw_t) == 0x00c4, "");
+
+#endif // _HARDWARE_STRUCTS_PADS_BANK0_H
+