diff options
Diffstat (limited to 'klippy/mcu.py')
| -rw-r--r-- | klippy/mcu.py | 26 |
1 files changed, 2 insertions, 24 deletions
diff --git a/klippy/mcu.py b/klippy/mcu.py index cfc389e7..7f784de7 100644 --- a/klippy/mcu.py +++ b/klippy/mcu.py @@ -335,7 +335,6 @@ class MCU_digital_out: self._pin = pin_params['pin'] self._invert = pin_params['invert'] self._start_value = self._shutdown_value = self._invert - self._is_static = False self._max_duration = 2. self._last_clock = 0 self._set_cmd = None @@ -343,17 +342,10 @@ class MCU_digital_out: return self._mcu def setup_max_duration(self, max_duration): self._max_duration = max_duration - def setup_start_value(self, start_value, shutdown_value, is_static=False): - if is_static and start_value != shutdown_value: - raise pins.error("Static pin can not have shutdown value") + def setup_start_value(self, start_value, shutdown_value): self._start_value = (not not start_value) ^ self._invert self._shutdown_value = (not not shutdown_value) ^ self._invert - self._is_static = is_static def _build_config(self): - if self._is_static: - self._mcu.add_config_cmd("set_digital_out pin=%s value=%d" - % (self._pin, self._start_value)) - return if self._max_duration and self._start_value != self._shutdown_value: raise pins.error("Pin with max duration must have start" " value equal to shutdown value") @@ -389,7 +381,6 @@ class MCU_pwm: self._pin = pin_params['pin'] self._invert = pin_params['invert'] self._start_value = self._shutdown_value = float(self._invert) - self._is_static = False self._last_clock = self._last_cycle_ticks = 0 self._pwm_max = 0. self._set_cmd = self._set_cycle_ticks = None @@ -400,15 +391,12 @@ class MCU_pwm: def setup_cycle_time(self, cycle_time, hardware_pwm=False): self._cycle_time = cycle_time self._hardware_pwm = hardware_pwm - def setup_start_value(self, start_value, shutdown_value, is_static=False): - if is_static and start_value != shutdown_value: - raise pins.error("Static pin can not have shutdown value") + def setup_start_value(self, start_value, shutdown_value): if self._invert: start_value = 1. - start_value shutdown_value = 1. - shutdown_value self._start_value = max(0., min(1., start_value)) self._shutdown_value = max(0., min(1., shutdown_value)) - self._is_static = is_static def _build_config(self): if self._max_duration and self._start_value != self._shutdown_value: raise pins.error("Pin with max duration must have start" @@ -423,12 +411,6 @@ class MCU_pwm: raise pins.error("PWM pin max duration too large") if self._hardware_pwm: self._pwm_max = self._mcu.get_constant_float("PWM_MAX") - if self._is_static: - self._mcu.add_config_cmd( - "set_pwm_out pin=%s cycle_ticks=%d value=%d" - % (self._pin, cycle_ticks, - self._start_value * self._pwm_max)) - return self._mcu.request_move_queue_slot() self._oid = self._mcu.create_oid() self._mcu.add_config_cmd( @@ -447,10 +429,6 @@ class MCU_pwm: # Software PWM if self._shutdown_value not in [0., 1.]: raise pins.error("shutdown value must be 0.0 or 1.0 on soft pwm") - if self._is_static: - self._mcu.add_config_cmd("set_digital_out pin=%s value=%d" - % (self._pin, self._start_value >= 0.5)) - return if cycle_ticks >= 1<<31: raise pins.error("PWM pin cycle time too large") self._mcu.request_move_queue_slot() |