diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index fee1ec20..60f344d4 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2580,6 +2580,12 @@ cs_pin: #spi_software_miso_pin: # See the "common SPI settings" section for a description of the # above parameters. +#chain_position: +#chain_length: +# These parameters configure an SPI daisy chain. The two parameters +# define the stepper position in the chain and the total chain length. +# Position 1 corresponds to the stepper that connects to the MOSI signal. +# The default is to not use an SPI daisy chain. #interpolate: True # If true, enable step interpolation (the driver will internally # step at a rate of 256 micro-steps). The default is True. @@ -2822,6 +2828,12 @@ cs_pin: #spi_software_miso_pin: # See the "common SPI settings" section for a description of the # above parameters. +#chain_position: +#chain_length: +# These parameters configure an SPI daisy chain. The two parameters +# define the stepper position in the chain and the total chain length. +# Position 1 corresponds to the stepper that connects to the MOSI signal. +# The default is to not use an SPI daisy chain. #interpolate: True # If true, enable step interpolation (the driver will internally # step at a rate of 256 micro-steps). The default is True. |