diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 6dc5df8b..e0fef5ad 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -300,14 +300,23 @@ extruders this command is used to change the active extruder. parameters. If EXTRUDER is not specified, it defaults to the active extruder. +#### SET_EXTRUDER_ROTATION_DISTANCE +`SET_EXTRUDER_ROTATION_DISTANCE EXTRUDER=<config_name> +[DISTANCE=<distance>]`: Set a new value for the provided extruder's +"rotation distance". Value is not retained on Klipper reset. Use with +caution as small changes can result in excessive pressure between +extruder and hot end. Do proper calibration with filament before use. +If 'DISTANCE' value is not included command will return current +rotation distance. + #### SET_EXTRUDER_STEP_DISTANCE -`SET_EXTRUDER_STEP_DISTANCE [EXTRUDER=<config_name>] +`SET_EXTRUDER_STEP_DISTANCE EXTRUDER=<config_name> [DISTANCE=<distance>]`: Set a new value for the provided extruder's "step distance". The "step distance" is `rotation_distance/(full_steps_per_rotation*microsteps)`. Value is not -retained on Klipper reset. Use with caution, small changes can result -in excessive pressure between extruder and hot end. Do proper -calibration steps with filament before use. If 'DISTANCE' value is not +retained on Klipper reset. Use with caution as small changes can +result in excessive pressure between extruder and hot end. Do proper +calibration with filament before use. If 'DISTANCE' value is not included command will return current step distance. #### SYNC_STEPPER_TO_EXTRUDER |