diff options
Diffstat (limited to 'docs/Firmware_Commands.md')
| -rw-r--r-- | docs/Firmware_Commands.md | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/docs/Firmware_Commands.md b/docs/Firmware_Commands.md index a2f3f559..a0f9a65c 100644 --- a/docs/Firmware_Commands.md +++ b/docs/Firmware_Commands.md @@ -46,12 +46,12 @@ Common startup commands: * set_pwm_out pin=%u cycle_ticks=%u value=%c : This command will immediately configure the given pin to use hardware based pulse-width-modulation (PWM) with the given number of - cycle_ticks. The "cycle_ticks" is the amount of time (in MCU clock - ticks) in a complete power on and power off cycle. A cycle_ticks - value of 1 can be used to request the fastest possible cycle - time. The specified "value" is between 0 and 255 with 0 indicating a - full off state and 255 indicating a full on state. This command may - be useful for enabling CPU and nozzle cooling fans. + cycle_ticks. The "cycle_ticks" is the number of MCU clock ticks each + power on and power off cycle should last. A cycle_ticks value of 1 + can be used to request the fastest possible cycle time. The "value" + parameter is between 0 and 255 with 0 indicating a full off state + and 255 indicating a full on state. This command may be useful for + enabling CPU and nozzle cooling fans. * send_spi_message pin=%u msg=%*s : This command can be used to transmit messages to a serial-peripheral-interface (SPI) component |