1 files changed, 25 insertions, 26 deletions
diff --git a/config/kit-zav3d-2019.cfg b/config/kit-zav3d-2019.cfg
index 2e6058b6..b27e6017 100644
--- a/config/kit-zav3d-2019.cfg
+++ b/config/kit-zav3d-2019.cfg
@@ -26,12 +26,12 @@
 
 
 [stepper_x]
-step_pin: ar54
-dir_pin: ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 32
-endstop_pin: ^ar3
+endstop_pin: ^PE5
 position_endstop: 0
 position_max: 200
 homing_speed: 50
@@ -39,25 +39,25 @@ homing_speed: 50
 # The stepper_y section is used to describe the Y axis as well as the
 # stepper controlling the X-Y movement.
 [stepper_y]
-step_pin: ar60
-dir_pin: ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 32
-endstop_pin: ^ar14
+endstop_pin: ^PJ1
 position_endstop: 0
 position_max: 200
 homing_speed: 50
 
 ## Configuration with Z Endstop, without Probe tool like BLTOUCH or others.
 #[stepper_z]
-#step_pin: ar46
-#dir_pin: ar48
-#enable_pin: !ar62
+#step_pin: PL3
+#dir_pin: PL1
+#enable_pin: !PK0
 #microsteps: 16
 #rotation_distance: 8
 ## I used Z_MAX_ENDSTOP
-#endstop_pin: ^ar19
+#endstop_pin: ^PD2
 ## More about z-calibration is here https://vk.com/topic-107680682_34101598
 #position_endstop: 235
 #position_max: 235
@@ -66,9 +66,9 @@ homing_speed: 50
 ## Configuration for Bltouch probe tool.
 ## Read more about BLTOUCH here https://www.klipper3d.org/BLTouch.html
 [stepper_z]
-step_pin: ar46
-dir_pin: ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 8
 position_min: -3
@@ -78,16 +78,16 @@ endstop_pin: probe:z_virtual_endstop
 ## Configuration with PID Calibration.
 ## Read more here https://www.klipper3d.org/Config_checks.html
 [extruder]
-step_pin: ar26
-dir_pin: !ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: !PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 13.5744
 nozzle_diameter: 0.400
 filament_diameter: 1.750
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog13
+sensor_pin: PK5
 min_temp: 0
 max_temp: 250
 control: pid
@@ -98,9 +98,9 @@ pid_kd: 151.598
 ## Configuration with PID Calibration.
 ## Read more here https://www.klipper3d.org/Config_checks.html
 [heater_bed]
-heater_pin: ar8
+heater_pin: PH5
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog14
+sensor_pin: PK6
 min_temp: 0
 max_temp: 130
 control: pid
@@ -109,11 +109,10 @@ pid_ki: 1.822
 pid_kd: 741.600
 
 [fan]
-pin: ar9
+pin: PH6
 
 [mcu]
 serial: /dev/ttyACM0
-pin_map: arduino
 
 [printer]
 kinematics: corexy
@@ -123,8 +122,8 @@ max_z_velocity: 25
 max_z_accel: 30
 
 [bltouch]
-sensor_pin: ^ar18
-control_pin: ar7
+sensor_pin: ^PD3
+control_pin: PH4
 x_offset: 39
 y_offset: 11
 z_offset: 0.9