diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-19 12:52:21 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-25 10:49:17 -0400 |
| commit | 7a443e50e1dbf42eeef02b2983cb15f33722d45c (patch) | |
| tree | 0fe9fdc744af1b53b1f8be647a61b44193ae9428 /config/kit-zav3d-2019.cfg | |
| parent | d386500788dc5764caff452ec74e6d944820614d (diff) | |
| download | kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.gz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.tar.xz kutter-7a443e50e1dbf42eeef02b2983cb15f33722d45c.zip | |
config: Don't use arduino mega aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/kit-zav3d-2019.cfg')
| -rw-r--r-- | config/kit-zav3d-2019.cfg | 51 |
1 files changed, 25 insertions, 26 deletions
diff --git a/config/kit-zav3d-2019.cfg b/config/kit-zav3d-2019.cfg index 2e6058b6..b27e6017 100644 --- a/config/kit-zav3d-2019.cfg +++ b/config/kit-zav3d-2019.cfg @@ -26,12 +26,12 @@ [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 200 homing_speed: 50 @@ -39,25 +39,25 @@ homing_speed: 50 # The stepper_y section is used to describe the Y axis as well as the # stepper controlling the X-Y movement. [stepper_y] -step_pin: ar60 -dir_pin: ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 32 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 ## Configuration with Z Endstop, without Probe tool like BLTOUCH or others. #[stepper_z] -#step_pin: ar46 -#dir_pin: ar48 -#enable_pin: !ar62 +#step_pin: PL3 +#dir_pin: PL1 +#enable_pin: !PK0 #microsteps: 16 #rotation_distance: 8 ## I used Z_MAX_ENDSTOP -#endstop_pin: ^ar19 +#endstop_pin: ^PD2 ## More about z-calibration is here https://vk.com/topic-107680682_34101598 #position_endstop: 235 #position_max: 235 @@ -66,9 +66,9 @@ homing_speed: 50 ## Configuration for Bltouch probe tool. ## Read more about BLTOUCH here https://www.klipper3d.org/BLTouch.html [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 position_min: -3 @@ -78,16 +78,16 @@ endstop_pin: probe:z_virtual_endstop ## Configuration with PID Calibration. ## Read more here https://www.klipper3d.org/Config_checks.html [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 13.5744 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 min_temp: 0 max_temp: 250 control: pid @@ -98,9 +98,9 @@ pid_kd: 151.598 ## Configuration with PID Calibration. ## Read more here https://www.klipper3d.org/Config_checks.html [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 min_temp: 0 max_temp: 130 control: pid @@ -109,11 +109,10 @@ pid_ki: 1.822 pid_kd: 741.600 [fan] -pin: ar9 +pin: PH6 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: corexy @@ -123,8 +122,8 @@ max_z_velocity: 25 max_z_accel: 30 [bltouch] -sensor_pin: ^ar18 -control_pin: ar7 +sensor_pin: ^PD3 +control_pin: PH4 x_offset: 39 y_offset: 11 z_offset: 0.9 |