diff options
Diffstat (limited to 'config/generic-bigtreetech-skr-e3-dip.cfg')
| -rw-r--r-- | config/generic-bigtreetech-skr-e3-dip.cfg | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/config/generic-bigtreetech-skr-e3-dip.cfg b/config/generic-bigtreetech-skr-e3-dip.cfg index 985b99fd..01655d4f 100644 --- a/config/generic-bigtreetech-skr-e3-dip.cfg +++ b/config/generic-bigtreetech-skr-e3-dip.cfg @@ -1,8 +1,8 @@ # This file contains common pin mappings for the BIGTREETECH SKR E3 # DIP. To use this config, the firmware should be compiled for the -# STM32F103 with a "28KiB bootloader". Also, select "Enable extra -# low-level configuration options" and configure "GPIO pins to set at -# micro-controller startup" to "!PC13". +# STM32F103 with a "28KiB bootloader" and USB communication. Also, +# select "Enable extra low-level configuration options" and configure +# "GPIO pins to set at micro-controller startup" to "!PC13". # The "make flash" command does not work on the SKR E3 DIP. Instead, # after running "make", copy the generated "out/klipper.bin" file to a |