diff options
Diffstat (limited to 'config/example-winch.cfg')
| -rw-r--r-- | config/example-winch.cfg | 23 |
1 files changed, 4 insertions, 19 deletions
diff --git a/config/example-winch.cfg b/config/example-winch.cfg index 3b33f9d8..cb9d0a65 100644 --- a/config/example-winch.cfg +++ b/config/example-winch.cfg @@ -1,6 +1,6 @@ -# This file serves as documentation for config parameters of cable -# winch style printers. One may copy and edit this file to configure a -# new cable winch printer. +# This file is an example config file for cable winch style printers. +# One may copy and edit this file to configure a new cable winch +# printer. # CABLE WINCH SUPPORT IS EXPERIMENTAL - PROCEED WITH CAUTION! @@ -8,26 +8,16 @@ # home the printer, manually send movement commands until the toolhead # is at 0,0,0 and then issue a G28 command. -# Only parameters unique to cable winch printers are described here - -# see the "example.cfg" file for description of common config -# parameters. +# See docs/Config_Reference.md for a description of parameters. -# The stepper_a section describes the stepper connected to the first -# cable winch. A minimum of 3 and a maximum of 26 cable winches may be -# defined (stepper_a to stepper_z) though it is common to define 4. [stepper_a] step_pin: ar54 dir_pin: ar55 enable_pin: !ar38 step_distance: .01 -# The step_distance is the nominal distance (in mm) the toolhead -# moves towards the cable winch on each step pulse. This parameter -# must be provided. anchor_x: 0 anchor_y: -2000 anchor_z: -100 -# The x, y, and z position of the cable winch in cartesian space. -# These parameters must be provided. [stepper_b] step_pin: ar60 @@ -81,16 +71,11 @@ control: watermark min_temp: 0 max_temp: 130 -# Print cooling fan (omit section if fan not present). -#[fan] -#pin: ar9 - [mcu] serial: /dev/ttyACM0 pin_map: arduino [printer] kinematics: winch -# This option must be "winch" for cable winch printers. max_velocity: 300 max_accel: 3000 |