diff options
| author | Rui Caridade <rmcbc@users.noreply.github.com> | 2019-03-08 16:47:17 +0000 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2019-03-08 11:47:17 -0500 |
| commit | 5c0a2479be961816d02ffbf261cf3e51ac5f5751 (patch) | |
| tree | e72c6d8c7b4247e84368f002e0ea14672e07d232 /test | |
| parent | fcaa75f01480c4de0de2f0656ee2947cce29ce03 (diff) | |
| download | kutter-5c0a2479be961816d02ffbf261cf3e51ac5f5751.tar.gz kutter-5c0a2479be961816d02ffbf261cf3e51ac5f5751.tar.xz kutter-5c0a2479be961816d02ffbf261cf3e51ac5f5751.zip | |
screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367)
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Diffstat (limited to 'test')
| -rw-r--r-- | test/klippy/screws_tilt_adjust.cfg | 89 | ||||
| -rw-r--r-- | test/klippy/screws_tilt_adjust.test | 7 |
2 files changed, 96 insertions, 0 deletions
diff --git a/test/klippy/screws_tilt_adjust.cfg b/test/klippy/screws_tilt_adjust.cfg new file mode 100644 index 00000000..7b29e6ec --- /dev/null +++ b/test/klippy/screws_tilt_adjust.cfg @@ -0,0 +1,89 @@ + # Test config for bed screws tool with bltouch +[stepper_x] +step_pin: ar54 +dir_pin: ar55 +enable_pin: !ar38 +step_distance: .0125 +endstop_pin: ^ar3 +position_endstop: 0 +position_max: 200 +homing_speed: 50 + +[stepper_y] +step_pin: ar60 +dir_pin: !ar61 +enable_pin: !ar56 +step_distance: .0125 +endstop_pin: ^ar14 +position_endstop: 0 +position_max: 200 +homing_speed: 50 + +[stepper_z] +step_pin: ar46 +dir_pin: ar48 +enable_pin: !ar62 +step_distance: .0025 +endstop_pin: probe:z_virtual_endstop +position_max: 200 + +[extruder] +step_pin: ar26 +dir_pin: ar28 +enable_pin: !ar24 +step_distance: .002 +nozzle_diameter: 0.400 +filament_diameter: 1.750 +heater_pin: ar10 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: analog13 +control: pid +pid_Kp: 22.2 +pid_Ki: 1.08 +pid_Kd: 114 +min_temp: 0 +max_temp: 250 + +[heater_bed] +heater_pin: ar8 +sensor_type: EPCOS 100K B57560G104F +sensor_pin: analog14 +control: watermark +min_temp: 0 +max_temp: 130 + +[bltouch] +sensor_pin: ar30 +control_pin: ar32 +z_offset: 1.15 + +[bed_mesh] +min_point: 10,10 +max_point: 180,180 + +[mcu] +serial: /dev/ttyACM0 +pin_map: arduino + +[printer] +kinematics: cartesian +max_velocity: 300 +max_accel: 3000 +max_z_velocity: 5 +max_z_accel: 100 + +[screws_tilt_adjust] +screw1: 10,30 +screw1_name: front left screw +screw2: 155,30 +screw2_name: front right screw +screw3: 155,190 +screw3_name: rear right screw +screw4: 10,190 +screw4_name: read left screw +horizontal_move_z: 10. +speed: 50. +samples: 3 +sample_retract_dist: 2. +samples_result: median +screw_thread: CW-M3 diff --git a/test/klippy/screws_tilt_adjust.test b/test/klippy/screws_tilt_adjust.test new file mode 100644 index 00000000..62b1d53a --- /dev/null +++ b/test/klippy/screws_tilt_adjust.test @@ -0,0 +1,7 @@ +# Test case for bed screws tilt helper tool +CONFIG screws_tilt_adjust.cfg +DICTIONARY atmega2560-16mhz.dict + +# Simple script to test +G28 +SCREWS_TILT_CALCULATE |