stm32f0: Remove hal based stm32f0 implementation

Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 279 deletions

diff --git a/lib/hal-stm32f0/source/stm32f0xx_ll_gpio.c b/lib/hal-stm32f0/source/stm32f0xx_ll_gpio.c
deleted file mode 100644
index 3fae50cc..00000000
--- a/lib/hal-stm32f0/source/stm32f0xx_ll_gpio.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_ll_gpio.c
-  * @author  MCD Application Team
-  * @brief   GPIO LL module driver.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-#if defined(USE_FULL_LL_DRIVER)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_ll_gpio.h"
-#include "stm32f0xx_ll_bus.h"
-#ifdef  USE_FULL_ASSERT
-#include "stm32_assert.h"
-#else
-#define assert_param(expr) ((void)0U)
-#endif
-
-/** @addtogroup STM32F0xx_LL_Driver
-  * @{
-  */
-
-#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
-
-/** @addtogroup GPIO_LL
-  * @{
-  */
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @addtogroup GPIO_LL_Private_Macros
-  * @{
-  */
-#define IS_LL_GPIO_PIN(__VALUE__)          (((0x00000000U) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL)))
-
-#define IS_LL_GPIO_MODE(__VALUE__)         (((__VALUE__) == LL_GPIO_MODE_INPUT)     ||\
-                                            ((__VALUE__) == LL_GPIO_MODE_OUTPUT)    ||\
-                                            ((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\
-                                            ((__VALUE__) == LL_GPIO_MODE_ANALOG))
-
-#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__)  (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL)  ||\
-                                            ((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
-
-#define IS_LL_GPIO_SPEED(__VALUE__)        (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW)       ||\
-                                            ((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM)    ||\
-                                            ((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH))
-
-#define IS_LL_GPIO_PULL(__VALUE__)         (((__VALUE__) == LL_GPIO_PULL_NO)   ||\
-                                            ((__VALUE__) == LL_GPIO_PULL_UP)   ||\
-                                            ((__VALUE__) == LL_GPIO_PULL_DOWN))
-
-#define IS_LL_GPIO_ALTERNATE(__VALUE__)    (((__VALUE__) == LL_GPIO_AF_0  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_1  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_2  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_3  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_4  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_5  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_6  )   ||\
-                                            ((__VALUE__) == LL_GPIO_AF_7 ))
-/**
-  * @}
-  */
-
-/* Private function prototypes -----------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup GPIO_LL_Exported_Functions
-  * @{
-  */
-
-/** @addtogroup GPIO_LL_EF_Init
-  * @{
-  */
-
-/**
-  * @brief  De-initialize GPIO registers (Registers restored to their default values).
-  * @param  GPIOx GPIO Port
-  * @retval An ErrorStatus enumeration value:
-  *          - SUCCESS: GPIO registers are de-initialized
-  *          - ERROR:   Wrong GPIO Port
-  */
-ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
-{
-  ErrorStatus status = SUCCESS;
-
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
-
-  /* Force and Release reset on clock of GPIOx Port */
-  if (GPIOx == GPIOA)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA);
-  }
-  else if (GPIOx == GPIOB)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB);
-  }
-  else if (GPIOx == GPIOC)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC);
-  }
-#if defined(GPIOD)
-  else if (GPIOx == GPIOD)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD);
-  }
-#endif /* GPIOD */
-#if defined(GPIOE)
-  else if (GPIOx == GPIOE)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE);
-  }
-#endif /* GPIOE */
-#if defined(GPIOF)
-  else if (GPIOx == GPIOF)
-  {
-    LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF);
-    LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF);
-  }
-#endif /* GPIOF */
-  else
-  {
-    status = ERROR;
-  }
-
-  return (status);
-}
-
-/**
-  * @brief  Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
-  * @param  GPIOx GPIO Port
-  * @param  GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
-  *         that contains the configuration information for the specified GPIO peripheral.
-  * @retval An ErrorStatus enumeration value:
-  *          - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
-  *          - ERROR:   Not applicable
-  */
-ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
-{
-  uint32_t pinpos     = 0x00000000U;
-  uint32_t currentpin = 0x00000000U;
-
-  /* Check the parameters */
-  assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
-  assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
-  assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
-  assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
-
-  /* ------------------------- Configure the port pins ---------------- */
-  /* Initialize  pinpos on first pin set */
-  /* pinpos = 0; useless as already done in default initialization */
-
-  /* Configure the port pins */
-  while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00000000U)
-  {
-    /* Get current io position */
-    currentpin = (GPIO_InitStruct->Pin) & (0x00000001U << pinpos);
-
-    if (currentpin)
-    {
-      /* Pin Mode configuration */
-      LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
-
-      if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
-      {
-        /* Check Speed mode parameters */
-        assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
-
-        /* Speed mode configuration */
-        LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
-      }
-
-      /* Pull-up Pull down resistor configuration*/
-      LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
-
-      if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)
-      {
-        /* Check Alternate parameter */
-        assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate));
-
-        /* Speed mode configuration */
-        if (currentpin < LL_GPIO_PIN_8)
-        {
-          LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate);
-        }
-        else
-        {
-          LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
-        }
-      }
-    }
-    pinpos++;
-  }
-
-  if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
-  {
-    /* Check Output mode parameters */
-    assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
-
-    /* Output mode configuration*/
-    LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
-
-  }
-  return (SUCCESS);
-}
-
-/**
-  * @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
-  * @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
-  *                          whose fields will be set to default values.
-  * @retval None
-  */
-
-void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
-{
-  /* Reset GPIO init structure parameters values */
-  GPIO_InitStruct->Pin        = LL_GPIO_PIN_ALL;
-  GPIO_InitStruct->Mode       = LL_GPIO_MODE_ANALOG;
-  GPIO_InitStruct->Speed      = LL_GPIO_SPEED_FREQ_LOW;
-  GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL;
-  GPIO_InitStruct->Pull       = LL_GPIO_PULL_NO;
-  GPIO_InitStruct->Alternate  = LL_GPIO_AF_0;
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
-
-/**
-  * @}
-  */
-
-#endif /* USE_FULL_LL_DRIVER */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/