stm32f0: Remove hal based stm32f0 implementation

Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 210 deletions

diff --git a/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard_ex.c b/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard_ex.c
deleted file mode 100644
index 3f764d30..00000000
--- a/lib/hal-stm32f0/source/stm32f0xx_hal_smartcard_ex.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_smartcard_ex.c
-  * @author  MCD Application Team
-  * @brief   SMARTCARD HAL module driver.
-  *          This file provides extended firmware functions to manage the following
-  *          functionalities of the SmartCard.
-  *           + Initialization and de-initialization functions
-  *           + Peripheral Control functions
-  *
-  *
-  @verbatim
-  =============================================================================
-               ##### SMARTCARD peripheral extended features  #####
-  =============================================================================
-  [..]
-  The Extended SMARTCARD HAL driver can be used as follows:
-
-    (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),
-        then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut,
-        auto-retry counter,...) in the hsmartcard AdvancedInit structure.
-
-
-
-  @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup SMARTCARDEx SMARTCARDEx
-  * @brief SMARTCARD Extended HAL module driver
-  * @{
-  */
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SMARTCARDEx_Exported_Functions  SMARTCARD Extended Exported Functions
-  * @{
-  */
-
-/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
-  * @brief    Extended control functions
-  *
-@verbatim
-  ===============================================================================
-                      ##### Peripheral Control functions #####
-  ===============================================================================
-  [..]
-  This subsection provides a set of functions allowing to initialize the SMARTCARD.
-     (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly
-     (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly
-     (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
-     (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief Update on the fly the SMARTCARD block length in RTOR register.
-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
-  *                    the configuration information for the specified SMARTCARD module.
-  * @param BlockLength SMARTCARD block length (8-bit long at most)
-  * @retval None
-  */
-void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)
-{
-  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS));
-}
-
-/**
-  * @brief Update on the fly the receiver timeout value in RTOR register.
-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
-  *                    the configuration information for the specified SMARTCARD module.
-  * @param TimeOutValue receiver timeout value in number of baud blocks. The timeout
-  *                     value must be less or equal to 0x0FFFFFFFF.
-  * @retval None
-  */
-void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)
-{
-  assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
-  MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);
-}
-
-/**
-  * @brief Enable the SMARTCARD receiver timeout feature.
-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
-  *                    the configuration information for the specified SMARTCARD module.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
-{
-
-  if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hsmartcard);
-
-    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
-
-    /* Set the USART RTOEN bit */
-    SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
-
-    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hsmartcard);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-
-/**
-  * @brief Disable the SMARTCARD receiver timeout feature.
-  * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
-  *                    the configuration information for the specified SMARTCARD module.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
-{
-
-  if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hsmartcard);
-
-    hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
-
-    /* Clear the USART RTOEN bit */
-    CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
-
-    hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hsmartcard);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/