stm32f0: Remove hal based stm32f0 implementation

Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 0 insertions, 347 deletions

diff --git a/lib/hal-stm32f0/source/stm32f0xx_hal_i2c_ex.c b/lib/hal-stm32f0/source/stm32f0xx_hal_i2c_ex.c
deleted file mode 100644
index 6c24c54b..00000000
--- a/lib/hal-stm32f0/source/stm32f0xx_hal_i2c_ex.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_i2c_ex.c
-  * @author  MCD Application Team
-  * @brief   I2C Extended HAL module driver.
-  *          This file provides firmware functions to manage the following
-  *          functionalities of I2C Extended peripheral:
-  *           + Extended features functions
-  *
-  @verbatim
-  ==============================================================================
-               ##### I2C peripheral Extended features  #####
-  ==============================================================================
-
-  [..] Comparing to other previous devices, the I2C interface for STM32F0xx
-       devices contains the following additional features
-
-       (+) Possibility to disable or enable Analog Noise Filter
-       (+) Use of a configured Digital Noise Filter
-       (+) Disable or enable wakeup from Stop mode
-
-                     ##### How to use this driver #####
-  ==============================================================================
-  [..] This driver provides functions to configure Noise Filter and Wake Up Feature
-    (#) Configure I2C Analog noise filter using the function HAL_I2CEx_ConfigAnalogFilter()
-    (#) Configure I2C Digital noise filter using the function HAL_I2CEx_ConfigDigitalFilter()
-    (#) Configure the enable or disable of I2C Wake Up Mode using the functions :
-          (++) HAL_I2CEx_EnableWakeUp()
-          (++) HAL_I2CEx_DisableWakeUp()
-    (#) Configure the enable or disable of fast mode plus driving capability using the functions :
-          (++) HAL_I2CEx_EnableFastModePlus()
-          (++) HAL_I2CEx_DisableFastModePlus()
-  @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup I2CEx I2CEx
-  * @brief I2C Extended HAL module driver
-  * @{
-  */
-
-#ifdef HAL_I2C_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup I2CEx_Exported_Functions I2C Extended Exported Functions
-  * @{
-  */
-
-/** @defgroup I2CEx_Exported_Functions_Group1 Extended features functions
-  * @brief    Extended features functions
- *
-@verbatim
- ===============================================================================
-                      ##### Extended features functions #####
- ===============================================================================
-    [..] This section provides functions allowing to:
-      (+) Configure Noise Filters
-      (+) Configure Wake Up Feature
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Configure I2C Analog noise filter.
-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
-  *                the configuration information for the specified I2Cx peripheral.
-  * @param  AnalogFilter New state of the Analog filter.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
-{
-  /* Check the parameters */
-  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
-  assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
-
-  if (hi2c->State == HAL_I2C_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_BUSY;
-
-    /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);
-
-    /* Reset I2Cx ANOFF bit */
-    hi2c->Instance->CR1 &= ~(I2C_CR1_ANFOFF);
-
-    /* Set analog filter bit*/
-    hi2c->Instance->CR1 |= AnalogFilter;
-
-    __HAL_I2C_ENABLE(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hi2c);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-
-/**
-  * @brief  Configure I2C Digital noise filter.
-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
-  *                the configuration information for the specified I2Cx peripheral.
-  * @param  DigitalFilter Coefficient of digital noise filter between Min_Data=0x00 and Max_Data=0x0F.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
-{
-  uint32_t tmpreg = 0U;
-
-  /* Check the parameters */
-  assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
-  assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
-
-  if (hi2c->State == HAL_I2C_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_BUSY;
-
-    /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);
-
-    /* Get the old register value */
-    tmpreg = hi2c->Instance->CR1;
-
-    /* Reset I2Cx DNF bits [11:8] */
-    tmpreg &= ~(I2C_CR1_DNF);
-
-    /* Set I2Cx DNF coefficient */
-    tmpreg |= DigitalFilter << 8U;
-
-    /* Store the new register value */
-    hi2c->Instance->CR1 = tmpreg;
-
-    __HAL_I2C_ENABLE(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hi2c);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-#if defined(I2C_CR1_WUPEN)
-
-/**
-  * @brief  Enable I2C wakeup from stop mode.
-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
-  *                the configuration information for the specified I2Cx peripheral.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp(I2C_HandleTypeDef *hi2c)
-{
-  /* Check the parameters */
-  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
-
-  if (hi2c->State == HAL_I2C_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_BUSY;
-
-    /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);
-
-    /* Enable wakeup from stop mode */
-    hi2c->Instance->CR1 |= I2C_CR1_WUPEN;
-
-    __HAL_I2C_ENABLE(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hi2c);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-
-/**
-  * @brief  Disable I2C wakeup from stop mode.
-  * @param  hi2c Pointer to a I2C_HandleTypeDef structure that contains
-  *                the configuration information for the specified I2Cx peripheral.
-  * @retval HAL status
-  */
-HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp(I2C_HandleTypeDef *hi2c)
-{
-  /* Check the parameters */
-  assert_param(IS_I2C_WAKEUP_FROMSTOP_INSTANCE(hi2c->Instance));
-
-  if (hi2c->State == HAL_I2C_STATE_READY)
-  {
-    /* Process Locked */
-    __HAL_LOCK(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_BUSY;
-
-    /* Disable the selected I2C peripheral */
-    __HAL_I2C_DISABLE(hi2c);
-
-    /* Enable wakeup from stop mode */
-    hi2c->Instance->CR1 &= ~(I2C_CR1_WUPEN);
-
-    __HAL_I2C_ENABLE(hi2c);
-
-    hi2c->State = HAL_I2C_STATE_READY;
-
-    /* Process Unlocked */
-    __HAL_UNLOCK(hi2c);
-
-    return HAL_OK;
-  }
-  else
-  {
-    return HAL_BUSY;
-  }
-}
-#endif
-
-/**
-  * @brief Enable the I2C fast mode plus driving capability.
-  * @param ConfigFastModePlus Selects the pin.
-  *   This parameter can be one of the @ref I2CEx_FastModePlus values
-  * @note  For I2C1, fast mode plus driving capability can be enabled on all selected
-  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
-  *        on each one of the following pins PB6, PB7, PB8 and PB9.
-  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
-  *        can be enabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
-  * @note  For all I2C2 pins fast mode plus driving capability can be enabled
-  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
-  * @retval None
-  */
-void HAL_I2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
-{
-  /* Check the parameter */
-  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
-
-  /* Enable SYSCFG clock */
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-
-  /* Enable fast mode plus driving capability for selected pin */
-  SET_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
-}
-
-/**
-  * @brief Disable the I2C fast mode plus driving capability.
-  * @param ConfigFastModePlus Selects the pin.
-  *   This parameter can be one of the @ref I2CEx_FastModePlus values
-  * @note  For I2C1, fast mode plus driving capability can be disabled on all selected
-  *        I2C1 pins using I2C_FASTMODEPLUS_I2C1 parameter or independently
-  *        on each one of the following pins PB6, PB7, PB8 and PB9.
-  * @note  For remaining I2C1 pins (PA14, PA15...) fast mode plus driving capability
-  *        can be disabled only by using I2C_FASTMODEPLUS_I2C1 parameter.
-  * @note  For all I2C2 pins fast mode plus driving capability can be disabled
-  *        only by using I2C_FASTMODEPLUS_I2C2 parameter.
-  * @retval None
-  */
-void HAL_I2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
-{
-  /* Check the parameter */
-  assert_param(IS_I2C_FASTMODEPLUS(ConfigFastModePlus));
-
-  /* Enable SYSCFG clock */
-  __HAL_RCC_SYSCFG_CLK_ENABLE();
-
-  /* Disable fast mode plus driving capability for selected pin */
-  CLEAR_BIT(SYSCFG->CFGR1, (uint32_t)ConfigFastModePlus);
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* HAL_I2C_MODULE_ENABLED */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/