diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2024-03-21 22:00:32 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2024-04-02 21:54:43 -0400 |
| commit | 0aacbc39736c933491690bf8174a0658acf4482f (patch) | |
| tree | b41ace8a2173c1bda937199ed9d696c47532ffc1 /klippy/toolhead.py | |
| parent | bedec55154771d5b02075c25be1a6d1f4bf91a07 (diff) | |
| download | kutter-0aacbc39736c933491690bf8174a0658acf4482f.tar.gz kutter-0aacbc39736c933491690bf8174a0658acf4482f.tar.xz kutter-0aacbc39736c933491690bf8174a0658acf4482f.zip | |
toolhead: Populate minimum_cruise_ratio to printer.configfile.settings
The default minimum_cruise_ratio setting does not get populated to the
printer.configfile.settings information due to the way the
max_accel_to_decel backwards compatibility support was implemented.
Slightly rework the config reading so that the default for
minimum_cruise_ratio is populated there.
Reported by @ReXT3D.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'klippy/toolhead.py')
| -rw-r--r-- | klippy/toolhead.py | 13 |
1 files changed, 7 insertions, 6 deletions
diff --git a/klippy/toolhead.py b/klippy/toolhead.py index d386ec8e..a995e4b1 100644 --- a/klippy/toolhead.py +++ b/klippy/toolhead.py @@ -217,16 +217,17 @@ class ToolHead: # Velocity and acceleration control self.max_velocity = config.getfloat('max_velocity', above=0.) self.max_accel = config.getfloat('max_accel', above=0.) - self.min_cruise_ratio = config.getfloat('minimum_cruise_ratio', None, - below=1., minval=0.) - if self.min_cruise_ratio is None: - self.min_cruise_ratio = 0.5 + min_cruise_ratio = 0.5 + if config.getfloat('minimum_cruise_ratio', None) is None: req_accel_to_decel = config.getfloat('max_accel_to_decel', None, above=0.) if req_accel_to_decel is not None: config.deprecate('max_accel_to_decel') - self.min_cruise_ratio = 1. - min(1., (req_accel_to_decel - / self.max_accel)) + min_cruise_ratio = 1. - min(1., (req_accel_to_decel + / self.max_accel)) + self.min_cruise_ratio = config.getfloat('minimum_cruise_ratio', + min_cruise_ratio, + below=1., minval=0.) self.square_corner_velocity = config.getfloat( 'square_corner_velocity', 5., minval=0.) self.junction_deviation = self.max_accel_to_decel = 0. |