gcode: Update gcode descriptions (#4335)

Add help description to HELP
Add help description to RESPOND
Add help description to MEASURE_AXES_NOISE, TEST_RESONANCES and SHAPER_CALIBRATE
Add help description to PAUSE, RESUME, CLEAR_PAUSE and CANCEL_PRINT
Add help description to GET_POSITION
Add help description to SET_RETRACTION and GET_RETRACTION

Signed-off-by: Stefan Dej <meteyou@gmail.com>

5 files changed, 37 insertions, 16 deletions

diff --git a/klippy/extras/firmware_retraction.py b/klippy/extras/firmware_retraction.py
index 81058257..bcecf8f2 100644
--- a/klippy/extras/firmware_retraction.py
+++ b/klippy/extras/firmware_retraction.py
@@ -16,8 +16,10 @@ class FirmwareRetraction:
                                  + self.unretract_extra_length)
         self.is_retracted = False
         self.gcode = self.printer.lookup_object('gcode')
-        self.gcode.register_command('SET_RETRACTION', self.cmd_SET_RETRACTION)
-        self.gcode.register_command('GET_RETRACTION', self.cmd_GET_RETRACTION)
+        self.gcode.register_command('SET_RETRACTION', self.cmd_SET_RETRACTION,
+                                    desc=self.cmd_SET_RETRACTION_help)
+        self.gcode.register_command('GET_RETRACTION', self.cmd_GET_RETRACTION,
+                                    desc=self.cmd_GET_RETRACTION_help)
         self.gcode.register_command('G10', self.cmd_G10)
         self.gcode.register_command('G11', self.cmd_G11)
 
@@ -28,7 +30,7 @@ class FirmwareRetraction:
             "unretract_extra_length": self.unretract_extra_length,
             "unretract_speed": self.unretract_speed,
         }
-
+    cmd_SET_RETRACTION_help = ("Set firmware retraction parameters")
     def cmd_SET_RETRACTION(self, gcmd):
         self.retract_length = gcmd.get_float('RETRACT_LENGTH',
                                              self.retract_length, minval=0.)
@@ -41,7 +43,7 @@ class FirmwareRetraction:
         self.unretract_length = (self.retract_length
                                  + self.unretract_extra_length)
         self.is_retracted = False
-
+    cmd_GET_RETRACTION_help = ("Report firmware retraction paramters")
     def cmd_GET_RETRACTION(self, gcmd):
         gcmd.respond_info("RETRACT_LENGTH=%.5f RETRACT_SPEED=%.5f"
                           " UNRETRACT_EXTRA_LENGTH=%.5f UNRETRACT_SPEED=%.5f"
diff --git a/klippy/extras/gcode_move.py b/klippy/extras/gcode_move.py
index 77087162..ecdadc43 100644
--- a/klippy/extras/gcode_move.py
+++ b/klippy/extras/gcode_move.py
@@ -34,7 +34,8 @@ class GCodeMove:
             gcode.register_command(cmd, func, False, desc)
         gcode.register_command('G0', self.cmd_G1)
         gcode.register_command('M114', self.cmd_M114, True)
-        gcode.register_command('GET_POSITION', self.cmd_GET_POSITION, True)
+        gcode.register_command('GET_POSITION', self.cmd_GET_POSITION, True,
+                               desc=self.cmd_GET_POSITION_help)
         self.Coord = gcode.Coord
         # G-Code coordinate manipulation
         self.absolute_coord = self.absolute_extrude = True
@@ -239,6 +240,8 @@ class GCodeMove:
             speed = gcmd.get_float('MOVE_SPEED', self.speed, above=0.)
             self.last_position[:3] = state['last_position'][:3]
             self.move_with_transform(self.last_position, speed)
+    cmd_GET_POSITION_help = (
+        "Return information on the current location of the toolhead")
     def cmd_GET_POSITION(self, gcmd):
         toolhead = self.printer.lookup_object('toolhead', None)
         if toolhead is None:
diff --git a/klippy/extras/pause_resume.py b/klippy/extras/pause_resume.py
index 0a2226b9..229bd6f4 100644
--- a/klippy/extras/pause_resume.py
+++ b/klippy/extras/pause_resume.py
@@ -15,10 +15,14 @@ class PauseResume:
         self.pause_command_sent = False
         self.printer.register_event_handler("klippy:connect",
                                             self.handle_connect)
-        self.gcode.register_command("PAUSE", self.cmd_PAUSE)
-        self.gcode.register_command("RESUME", self.cmd_RESUME)
-        self.gcode.register_command("CLEAR_PAUSE", self.cmd_CLEAR_PAUSE)
-        self.gcode.register_command("CANCEL_PRINT", self.cmd_CANCEL_PRINT)
+        self.gcode.register_command("PAUSE", self.cmd_PAUSE,
+                                    desc=self.cmd_PAUSE_help)
+        self.gcode.register_command("RESUME", self.cmd_RESUME,
+                                    desc=self.cmd_RESUME_help)
+        self.gcode.register_command("CLEAR_PAUSE", self.cmd_CLEAR_PAUSE,
+                                    desc=self.cmd_CLEAR_PAUSE_help)
+        self.gcode.register_command("CANCEL_PRINT", self.cmd_CANCEL_PRINT,
+                                    desc=self.cmd_CANCEL_PRINT_help)
         webhooks = self.printer.lookup_object('webhooks')
         webhooks.register_endpoint("pause_resume/cancel",
                                    self._handle_cancel_request)
@@ -51,6 +55,7 @@ class PauseResume:
                 self.sd_paused = False
                 self.gcode.respond_info("action:paused")
             self.pause_command_sent = True
+    cmd_PAUSE_help = ("Pauses the current print")
     def cmd_PAUSE(self, gcmd):
         if self.is_paused:
             gcmd.respond_info("Print already paused")
@@ -66,6 +71,7 @@ class PauseResume:
         else:
             self.gcode.respond_info("action:resumed")
         self.pause_command_sent = False
+    cmd_RESUME_help = ("Resumes the print from a pause")
     def cmd_RESUME(self, gcmd):
         if not self.is_paused:
             gcmd.respond_info("Print is not paused, resume aborted")
@@ -76,8 +82,11 @@ class PauseResume:
             % (velocity))
         self.send_resume_command()
         self.is_paused = False
+    cmd_CLEAR_PAUSE_help = (
+        "Clears the current paused state without resuming the print")
     def cmd_CLEAR_PAUSE(self, gcmd):
         self.is_paused = self.pause_command_sent = False
+    cmd_CANCEL_PRINT_help = ("Cancel the current print")
     def cmd_CANCEL_PRINT(self, gcmd):
         self.cmd_PAUSE(gcmd)
         if not self.sd_paused:
diff --git a/klippy/extras/resonance_tester.py b/klippy/extras/resonance_tester.py
index b78305e1..14efcd61 100644
--- a/klippy/extras/resonance_tester.py
+++ b/klippy/extras/resonance_tester.py
@@ -97,11 +97,14 @@ class ResonanceTester:
 
         self.gcode = self.printer.lookup_object('gcode')
         self.gcode.register_command("MEASURE_AXES_NOISE",
-                                    self.cmd_MEASURE_AXES_NOISE)
+                                    self.cmd_MEASURE_AXES_NOISE,
+                                    desc=self.cmd_MEASURE_AXES_NOISE_help)
         self.gcode.register_command("TEST_RESONANCES",
-                                    self.cmd_TEST_RESONANCES)
+                                    self.cmd_TEST_RESONANCES,
+                                    desc=self.cmd_TEST_RESONANCES_help)
         self.gcode.register_command("SHAPER_CALIBRATE",
-                                    self.cmd_SHAPER_CALIBRATE)
+                                    self.cmd_SHAPER_CALIBRATE,
+                                    desc=self.cmd_SHAPER_CALIBRATE_help)
         self.printer.register_event_handler("klippy:connect", self.connect)
 
     def connect(self):
@@ -159,7 +162,7 @@ class ResonanceTester:
                     else:
                         calibration_data[axis].add_data(new_data)
         return calibration_data
-
+    cmd_TEST_RESONANCES_help = ("Runs the resonance test for a specifed axis")
     def cmd_TEST_RESONANCES(self, gcmd):
         # Parse parameters
         if len(self.test.get_supported_axes()) > 1:
@@ -197,7 +200,8 @@ class ResonanceTester:
                                                   helper, axis, data)
             gcmd.respond_info(
                     "Resonances data written to %s file" % (csv_name,))
-
+    cmd_SHAPER_CALIBRATE_help = (
+        "Simular to TEST_RESONANCES but suggest input shaper config")
     def cmd_SHAPER_CALIBRATE(self, gcmd):
         # Parse parameters
         axis = gcmd.get("AXIS", None)
@@ -241,7 +245,8 @@ class ResonanceTester:
         gcmd.respond_info(
             "The SAVE_CONFIG command will update the printer config file\n"
             "with these parameters and restart the printer.")
-
+    cmd_MEASURE_AXES_NOISE_help = (
+        "Measures noise of all enabled accelerometer chips")
     def cmd_MEASURE_AXES_NOISE(self, gcmd):
         meas_time = gcmd.get_float("MEAS_TIME", 2.)
         for _, chip in self.accel_chips:
diff --git a/klippy/extras/respond.py b/klippy/extras/respond.py
index 0e228108..0adbc4bf 100644
--- a/klippy/extras/respond.py
+++ b/klippy/extras/respond.py
@@ -19,7 +19,8 @@ class HostResponder:
         self.default_prefix = config.get('default_prefix', self.default_prefix)
         gcode = self.printer.lookup_object('gcode')
         gcode.register_command('M118', self.cmd_M118, True)
-        gcode.register_command('RESPOND', self.cmd_RESPOND, True)
+        gcode.register_command('RESPOND', self.cmd_RESPOND, True,
+                               desc=self.cmd_RESPOND_help)
     def cmd_M118(self, gcmd):
         msg = gcmd.get_commandline()
         umsg = msg.upper()
@@ -33,6 +34,7 @@ class HostResponder:
         else:
             msg = ''
         gcmd.respond_raw("%s %s" % (self.default_prefix, msg))
+    cmd_RESPOND_help = ("Echo the message prepended with a prefix")
     def cmd_RESPOND(self, gcmd):
         respond_type = gcmd.get('TYPE', None)
         prefix = self.default_prefix