fan: Clarify hardware_pwm and allow cycle_time to be set on software pwm

Specify hardware pwm cycle times using the same method as software pwm
(in seconds, not clock ticks).  Allow the fan code to be configured
with an explicit cycle time even when using software pwm.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

3 files changed, 13 insertions, 14 deletions

diff --git a/klippy/extras/fan.py b/klippy/extras/fan.py
index c7434ca5..7bc4a26d 100644
--- a/klippy/extras/fan.py
+++ b/klippy/extras/fan.py
@@ -5,8 +5,7 @@
 # This file may be distributed under the terms of the GNU GPLv3 license.
 import pins
 
-FAN_MIN_TIME = 0.1
-PWM_CYCLE_TIME = 0.010
+FAN_MIN_TIME = 0.100
 
 class PrinterFan:
     def __init__(self, config):
@@ -17,8 +16,9 @@ class PrinterFan:
         printer = config.get_printer()
         self.mcu_fan = pins.setup_pin(printer, 'pwm', config.get('pin'))
         self.mcu_fan.setup_max_duration(0.)
-        self.mcu_fan.setup_cycle_time(PWM_CYCLE_TIME)
-        self.mcu_fan.setup_hard_pwm(config.getint('hard_pwm', 0))
+        cycle_time = config.getfloat('cycle_time', 0.010, above=0.)
+        hardware_pwm = config.getboolean('hardware_pwm', False)
+        self.mcu_fan.setup_cycle_time(cycle_time, hardware_pwm)
     def set_speed(self, print_time, value):
         value = max(0., min(self.max_power, value))
         if value == self.last_fan_value:
diff --git a/klippy/extras/multi_pin.py b/klippy/extras/multi_pin.py
index 3e033a86..5ffaed80 100644
--- a/klippy/extras/multi_pin.py
+++ b/klippy/extras/multi_pin.py
@@ -40,12 +40,9 @@ class PrinterMultiPin:
     def setup_start_value(self, start_value, shutdown_value):
         for mcu_pin in self.mcu_pins:
             mcu_pin.setup_start_value(start_value, shutdown_value)
-    def setup_cycle_time(self, cycle_time):
+    def setup_cycle_time(self, cycle_time, hardware_pwm=False):
         for mcu_pin in self.mcu_pins:
-            mcu_pin.setup_cycle_time(cycle_time)
-    def setup_hard_pwm(self, hard_cycle_ticks):
-        for mcu_pin in self.mcu_pins:
-            mcu_pin.setup_hard_pwm(hard_cycle_ticks)
+            mcu_pin.setup_cycle_time(cycle_time, hardware_pwm)
     def set_digital(self, print_time, value):
         for mcu_pin in self.mcu_pins:
             mcu_pin.set_digital(print_time, value)
diff --git a/klippy/extras/replicape.py b/klippy/extras/replicape.py
index 72ab45e9..742607c5 100644
--- a/klippy/extras/replicape.py
+++ b/klippy/extras/replicape.py
@@ -3,6 +3,7 @@
 # Copyright (C) 2017,2018  Kevin O'Connor <kevin@koconnor.net>
 #
 # This file may be distributed under the terms of the GNU GPLv3 license.
+import logging
 import pins, mcu
 
 REPLICAPE_MAX_CURRENT = 3.84
@@ -37,11 +38,12 @@ class pca9685_pwm:
         return self._mcu
     def setup_max_duration(self, max_duration):
         self._max_duration = max_duration
-    def setup_cycle_time(self, cycle_time):
-        pass
-    def setup_hard_pwm(self, hard_cycle_ticks):
-        if hard_cycle_ticks:
-            raise pins.error("pca9685 does not support hard_pwm parameter")
+    def setup_cycle_time(self, cycle_time, hardware_pwm=False):
+        if hardware_pwm:
+            raise pins.error("pca9685 does not support hardware_pwm parameter")
+        if cycle_time != self._cycle_time:
+            logging.info("Ignoring pca9685 cycle time of %.6f (using %.6f)",
+                         cycle_time, self._cycle_time)
     def setup_start_value(self, start_value, shutdown_value, is_static=False):
         if is_static and start_value != shutdown_value:
             raise pins.error("Static pin can not have shutdown value")