diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2016-12-01 10:21:36 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2016-12-01 10:21:36 -0500 |
| commit | babc9e7a1e2d6a8dc7a826ff66c0a11b8a1e556a (patch) | |
| tree | b06367c363ad63bac52e8d3b79a0b47914a74604 /docs/Installation.md | |
| parent | d2ecc9d80c749454b3d14d547d8ec71c0c124fd1 (diff) | |
| download | kutter-babc9e7a1e2d6a8dc7a826ff66c0a11b8a1e556a.tar.gz kutter-babc9e7a1e2d6a8dc7a826ff66c0a11b8a1e556a.tar.xz kutter-babc9e7a1e2d6a8dc7a826ff66c0a11b8a1e556a.zip | |
docs: Minor updates to wording of some documents
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'docs/Installation.md')
| -rw-r--r-- | docs/Installation.md | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/docs/Installation.md b/docs/Installation.md index 6a2447cc..f5d8529b 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -1,8 +1,7 @@ Klipper is currently in an experimental state. These instructions assume the software will run on a Raspberry Pi computer in conjunction -with OctoPrint. Klipper supports only Atmel ATmega based -micro-controllers and Arduino Due (Atmel SAM3x8e ARM -micro-controllers) printers at this time. +with OctoPrint. Klipper supports Atmel ATmega based micro-controllers +and Arduino Due (Atmel SAM3x8e ARM micro-controllers) printers. It is recommended that a Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host. The software will run on a first generation |