diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2020-11-20 11:57:18 -0500 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2020-11-20 11:57:18 -0500 |
| commit | 37b475815e07a6877ff2f99aa559a593fd050915 (patch) | |
| tree | 5cfda81cc7b85a78aa5f2d2bb40a1e54a7968428 /config | |
| parent | 15b5dbaf8ffac8e3889b2cc0ba7a61bce1e9fb6f (diff) | |
| download | kutter-37b475815e07a6877ff2f99aa559a593fd050915.tar.gz kutter-37b475815e07a6877ff2f99aa559a593fd050915.tar.xz kutter-37b475815e07a6877ff2f99aa559a593fd050915.zip | |
docs: Move replicape reference from generic-replicate.cfg to Config_Reference.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config')
| -rw-r--r-- | config/generic-replicape.cfg | 31 |
1 files changed, 0 insertions, 31 deletions
diff --git a/config/generic-replicape.cfg b/config/generic-replicape.cfg index fe361dea..f8e3063e 100644 --- a/config/generic-replicape.cfg +++ b/config/generic-replicape.cfg @@ -20,42 +20,11 @@ pin_map: beaglebone [mcu host] serial: /tmp/klipper_host_mcu -# The "replicape" config section adds "replicape:stepper_x_enable" -# virtual stepper enable pins (for steppers x, y, z, e, and h) and -# "replicape:power_x" PWM output pins (for hotbed, e, h, fan0, fan1, -# fan2, and fan3) that may then be used elsewhere in the config file. [replicape] revision: B3 -# The replicape hardware revision. Currently only revision "B3" is -# supported. This parameter must be provided. -#enable_pin: !P9_41 -# The replicape global enable pin. The default is !P9_41. host_mcu: host -# The name of the mcu config section that communicates with the -# Klipper "linux process" mcu instance. This parameter must be -# provided. -#standstill_power_down: False -# This parameter controls the CFG6_ENN line on all stepper -# motors. True sets the enable lines to "open". The default is -# False. stepper_x_microstep_mode: spread16 -# This parameter controls the CFG1 and CFG2 pins of the given -# stepper motor driver. Available options are: disable, 1, 2, -# spread2, 4, 16, spread4, spread16, stealth4, and stealth16. The -# default is disable. stepper_x_current: 0.5 -# The configured maximum current (in Amps) of the stepper motor -# driver. This parameter must be provided if the stepper is not in a -# disable mode. -#stepper_x_chopper_off_time_high: False -# This parameter controls the CFG0 pin of the stepper motor driver -# (True sets CFG0 high, False sets it low). The default is False. -#stepper_x_chopper_hysteresis_high: False -# This parameter controls the CFG4 pin of the stepper motor driver -# (True sets CFG4 high, False sets it low). The default is False. -#stepper_x_chopper_blank_time_high: True -# This parameter controls the CFG5 pin of the stepper motor driver -# (True sets CFG5 high, False sets it low). The default is True. stepper_y_microstep_mode: spread16 stepper_y_current: 0.5 stepper_z_microstep_mode: spread16 |