diff options
| author | Justin Schuh <jschuh@users.noreply.github.com> | 2021-03-27 07:55:19 -0700 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2021-03-27 12:55:17 -0400 |
| commit | 20c96a83003ea0699cc25f38b07cf1c396100ece (patch) | |
| tree | 43d1140e9a8fb6528692f61727f3f482ad2ebc10 /config/printer-robo3d-r2-2017.cfg | |
| parent | cc31810fa8be6d58b1b9d71f9847cfe9842a7c6a (diff) | |
| download | kutter-20c96a83003ea0699cc25f38b07cf1c396100ece.tar.gz kutter-20c96a83003ea0699cc25f38b07cf1c396100ece.tar.xz kutter-20c96a83003ea0699cc25f38b07cf1c396100ece.zip | |
config: Update printer-robo3d-r2-2017.cfg
Improvements and fixes based on feedback:
* Make speeds and limits more conservative
* Fix Y endstop position
* Improve IR bed leveling
* Fix filament runout pin
Signed-off-by: Justin Schuh <code@justinschuh.com>
Diffstat (limited to 'config/printer-robo3d-r2-2017.cfg')
| -rw-r--r-- | config/printer-robo3d-r2-2017.cfg | 25 |
1 files changed, 14 insertions, 11 deletions
diff --git a/config/printer-robo3d-r2-2017.cfg b/config/printer-robo3d-r2-2017.cfg index e9165c44..a87f4bef 100644 --- a/config/printer-robo3d-r2-2017.cfg +++ b/config/printer-robo3d-r2-2017.cfg @@ -14,7 +14,7 @@ microsteps: 16 rotation_distance: 40 endstop_pin: ^PE5 position_endstop: 0 -position_max: 200 +position_max: 195 homing_speed: 120 [stepper_y] @@ -24,9 +24,9 @@ enable_pin: !PF2 microsteps: 16 rotation_distance: 40 endstop_pin: ^PJ1 -position_endstop: 197 +position_endstop: 195 position_min: 0 -position_max: 200 +position_max: 195 homing_speed: 120 [stepper_z] @@ -74,26 +74,29 @@ pid_kd: 121.707 pin: ^PD2 x_offset: 2 y_offset: 30 -z_offset: 10 # Safe value. Adjust for your nozzle offset. +z_offset: 1 # Safe value. Adjust for your nozzle offset. sample_retract_dist: 1.0 # Below are very conservative settings, as the IR probe has repeatability # issues depending on visual characteristics of the build surface. +# Polycarbonate build surfaces (e.g. BuildTak) work best with the IR sensor. +# Persistent repeatablity issues are usually due to excessive ambient light. +# Try darkening the room or otherwise preventing light from interfering with +# the IR sensor on the extruder. samples: 3 samples_tolerance: 0.2 samples_tolerance_retries: 5 -samples_result: median [safe_z_home] home_xy_position: 100, 70 speed: 150 z_hop: 10 -z_hop_speed: 10 +z_hop_speed: 5 [bed_mesh] speed: 200 -horizontal_move_z: 8 -mesh_min: 30, 30 -mesh_max: 170, 170 +horizontal_move_z: 5 +mesh_min: 5, 30 +mesh_max: 190, 195 probe_count: 4, 4 fade_start: 1 fade_end: 5 @@ -139,11 +142,11 @@ serial: /dev/ttyACM0 #serial: /tmp/klipper_host_mcu # # [filament_switch_sensor sensor0] -# switch_pin: host:gpio21 +# switch_pin: ^!host:gpio21 [printer] kinematics: cartesian max_velocity: 300 max_accel: 3000 max_z_velocity: 20 -max_z_accel: 1000 +max_z_accel: 100 |