diff options
| author | Chris Lee <clee@mg8.org> | 2020-02-18 00:52:59 -0700 |
|---|---|---|
| committer | KevinOConnor <kevin@koconnor.net> | 2020-02-18 12:10:09 -0500 |
| commit | 90500c331a982363ddc6312eba573bc488366313 (patch) | |
| tree | 0ce6d24e672ce2b6cc0eced5be24a318396c276d /config/printer-lulzbot-taz6-2017.cfg | |
| parent | 29c6c893273c41711e1337b30a557f736386626a (diff) | |
| download | kutter-90500c331a982363ddc6312eba573bc488366313.tar.gz kutter-90500c331a982363ddc6312eba573bc488366313.tar.xz kutter-90500c331a982363ddc6312eba573bc488366313.zip | |
config: Update TAZ6 configuration
Support probing the corner washers for the bed tilt using G29,
flesh out the rest of the configuration for the display, and add
support for the Aerostruder (commented out by default).
Signed-Off-By: Chris Lee <clee@mg8.org>
Diffstat (limited to 'config/printer-lulzbot-taz6-2017.cfg')
| -rw-r--r-- | config/printer-lulzbot-taz6-2017.cfg | 66 |
1 files changed, 56 insertions, 10 deletions
diff --git a/config/printer-lulzbot-taz6-2017.cfg b/config/printer-lulzbot-taz6-2017.cfg index d045a004..80cc4bf2 100644 --- a/config/printer-lulzbot-taz6-2017.cfg +++ b/config/printer-lulzbot-taz6-2017.cfg @@ -2,6 +2,8 @@ # use this config, the firmware should be compiled for the AVR # atmega2560. +# For a TAZ6 with DualV3 extruder, see printer-lulzbot-taz6-dual-v3-2017.cfg. + # See the example.cfg file for a description of available parameters. [stepper_x] @@ -25,7 +27,6 @@ position_endstop: 306 position_min: -20 position_max: 306 homing_speed: 50 - [stepper_z] step_pin: PC2 dir_pin: PL2 @@ -37,6 +38,7 @@ position_min: -1.5 position_max: 270 homing_speed: 1 +# settings for "Tilapia" Hexagon extruder (TAZ6 standard) [extruder] step_pin: PC3 dir_pin: !PL6 @@ -55,19 +57,33 @@ min_temp: 0 max_temp: 300 min_extrude_temp: 140 -#[extruder1] -#step_pin: PC4 -#dir_pin: PL7 -#enable_pin: !PA3 -#heater_pin: PH4 -#sensor_pin: PF1 -#... +# settings for "Angelfish" Aerostruder (E3D Titan Aero V6) +#[extruder] +#step_pin: PC3 +#dir_pin: !PL6 +#enable_pin: !PA4 +#step_distance: 0.002381 +#nozzle_diameter: 0.400 +#filament_diameter: 2.920 +#heater_pin: PH6 +#sensor_type: ATC Semitec 104GT-2 +#sensor_pin: PF0 +#control: pid +#pid_Kp: 21.00 +#pid_Ki: 1.78 +#pid_Kd: 61.93 +#min_temp: 0 +#max_temp: 300 +#min_extrude_temp: 140 [heater_bed] heater_pin: PE5 -sensor_type: EPCOS 100K B57560G104F +sensor_type: Honeywell 100K 135-104LAG-J01 sensor_pin: PF2 -control: watermark +control: pid +pid_Kp: 162.0 +pid_Ki: 17.0 +pid_Kd: 378.0 min_temp: 0 max_temp: 130 @@ -114,3 +130,33 @@ lcd_type: st7920 cs_pin: PG4 sclk_pin: PJ2 sid_pin: PG3 +encoder_pins: ^PJ6,^PJ5 +click_pin: ^!PE2 +menu_timeout: 5 + +[probe] +pin: ^!PA0 +z_offset:1.377 +speed: 0.5 +lift_speed: 1.5 +samples: 2 +sample_retract_dist: 1.0 +samples_tolerance: 0.075 + +[bed_tilt] +points: -5,-3 + 290,-3 + 290,292 + -5,292 +speed: 75 +horizontal_move_z: 5 + +[safe_z_home] +home_xy_position: -19,265 +speed: 50.0 +z_hop: 10.0 + +# Perform ABL by running G29 in START gcode +[gcode_macro G29] +gcode: + BED_TILT_CALIBRATE |