diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-05-09 09:02:43 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-05-09 09:02:43 -0400 |
| commit | 8eef1e214639284e386e0d833b6e9c092f9db53e (patch) | |
| tree | 0bd5d61e7e01e64acfd49ef2c5b2908ece2b0e6d /config/generic-mks-sgenl.cfg | |
| parent | 1ed67120cde08dc32262d4adc04ff1f693a448d8 (diff) | |
| download | kutter-8eef1e214639284e386e0d833b6e9c092f9db53e.tar.gz kutter-8eef1e214639284e386e0d833b6e9c092f9db53e.tar.xz kutter-8eef1e214639284e386e0d833b6e9c092f9db53e.zip | |
config: Use "stealthchop_threshold: 999999" if set
Change all the example config files to use either 0 or 999999 for
stealthchop_threshold (as is recommended in the TMC_Drivers.md
document).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-mks-sgenl.cfg')
| -rw-r--r-- | config/generic-mks-sgenl.cfg | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/config/generic-mks-sgenl.cfg b/config/generic-mks-sgenl.cfg index 0498120d..68169a8c 100644 --- a/config/generic-mks-sgenl.cfg +++ b/config/generic-mks-sgenl.cfg @@ -91,31 +91,31 @@ max_z_accel: 100 #uart_pin: P1.1 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 250 +#stealthchop_threshold: 999999 #[tmc2208 stepper_y] #uart_pin: P1.8 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 250 +#stealthchop_threshold: 999999 #[tmc2208 stepper_z] #uart_pin: P1.10 #run_current: 0.650 #hold_current: 0.450 -#stealthchop_threshold: 30 +#stealthchop_threshold: 999999 #[tmc2208 extruder] #uart_pin: P1.15 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 5 +#stealthchop_threshold: 999999 #[tmc2208 extruder1] #uart_pin: P1.17 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 5 +#stealthchop_threshold: 999999 ######################################## @@ -130,7 +130,7 @@ max_z_accel: 100 ##diag1_pin: ^!P1.29 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 250 +#stealthchop_threshold: 999999 #[tmc2130 stepper_y] #cs_pin: P1.8 @@ -140,7 +140,7 @@ max_z_accel: 100 ##diag1_pin: ^!P1.27 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 250 +#stealthchop_threshold: 999999 #[tmc2130 stepper_z] #cs_pin: P1.10 @@ -150,7 +150,7 @@ max_z_accel: 100 ##diag1_pin: ^!P1.25 #run_current: 0.650 #hold_current: 0.450 -#stealthchop_threshold: 30 +#stealthchop_threshold: 999999 #[tmc2130 extruder] #cs_pin: P1.15 @@ -160,7 +160,7 @@ max_z_accel: 100 ##diag1_pin: ^!P1.28 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 5 +#stealthchop_threshold: 999999 #[tmc2130 extruder1] #cs_pin: P1.17 @@ -170,7 +170,7 @@ max_z_accel: 100 ##diag1_pin: ^!P1.26 #run_current: 0.800 #hold_current: 0.500 -#stealthchop_threshold: 5 +#stealthchop_threshold: 999999 ######################################## |