config: Use "stealthchop_threshold: 999999" if set

Change all the example config files to use either 0 or 999999 for
stealthchop_threshold (as is recommended in the TMC_Drivers.md
document).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 12 insertions, 12 deletions

diff --git a/config/generic-fysetc-s6-v2.cfg b/config/generic-fysetc-s6-v2.cfg
index c445b265..cdc9190d 100644
--- a/config/generic-fysetc-s6-v2.cfg
+++ b/config/generic-fysetc-s6-v2.cfg
@@ -107,37 +107,37 @@ max_z_accel: 100
 #uart_pin: PE8
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_y]
 #uart_pin: PC4
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_z]
 #uart_pin: PD12
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 100
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder]
 #uart_pin: PA15
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder1]
 #uart_pin: PC5
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder2]
 #uart_pin: PE0
 #run_current: 0.8
 #hold_current: 0.5
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 
 ########################################
@@ -150,7 +150,7 @@ max_z_accel: 100
 #diag1_pin: PB14
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
 #spi_bus: spi4
@@ -158,7 +158,7 @@ max_z_accel: 100
 #diag1_pin: PB13
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
 #spi_bus: spi4
@@ -166,7 +166,7 @@ max_z_accel: 100
 #diag1_pin: PA0
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
 #spi_bus: spi4
@@ -174,7 +174,7 @@ max_z_accel: 100
 #diag1_pin: PA3
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
 #spi_bus: spi4
@@ -182,7 +182,7 @@ max_z_accel: 100
 #diag1_pin: PA2
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder2]
 #spi_bus: spi4
@@ -190,7 +190,7 @@ max_z_accel: 100
 #diag1_pin: PA1
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 
 ########################################