config: Use "stealthchop_threshold: 999999" if set

Change all the example config files to use either 0 or 999999 for
stealthchop_threshold (as is recommended in the TMC_Drivers.md
document).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 18 insertions, 18 deletions

diff --git a/config/generic-flyboard.cfg b/config/generic-flyboard.cfg
index 66e3c5a9..7e5727ed 100644
--- a/config/generic-flyboard.cfg
+++ b/config/generic-flyboard.cfg
@@ -145,55 +145,55 @@ max_z_accel: 100
 #uart_pin: PG13
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_y]
 #uart_pin: PG10
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_z]
 #uart_pin: PD5
 #run_current: 0.650
 #hold_current: 0.450
-#stealthchop_threshold: 30
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder]
 #uart_pin: PD1
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder1]
 #uart_pin: PA14
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder2]
 #uart_pin: PG6
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder3]
 #uart_pin: PG3
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder4]
 #uart_pin: PD10
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder5]
 #uart_pin: PB12
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 
 ########################################
@@ -205,63 +205,63 @@ max_z_accel: 100
 ##diag1_pin: PC3
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
 #cs_pin: PG10
 ##diag1_pin: PF2
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
 #cs_pin: PBD5
 ##diag1_pin: PF0
 #run_current: 0.650
 #hold_current: 0.450
-#stealthchop_threshold: 30
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
 #cs_pin: PD1
 ##diag1_pin: PE15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
 #cs_pin: PA14
 ##diag1_pin: PE10
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder2]
 #cs_pin: PG6
 ##diag1_pin: PC15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder3]
 #cs_pin: PG3
 ##diag1_pin: PC15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder4]
 #cs_pin: PD10
 ##diag1_pin: PC15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder5]
 #cs_pin: PB12
 ##diag1_pin: PC15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 
 ########################################