diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2021-03-19 12:28:35 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2021-03-25 10:49:17 -0400 |
| commit | 681ca5be62652ffb5fe940d458e39b20c705eed5 (patch) | |
| tree | a64b2a0f1ee8fed1b4388cc165e5965c735dfcb5 /config/generic-cramps.cfg | |
| parent | 165b4cb63fc7b8ff967d327c88604b7ef0bef6a3 (diff) | |
| download | kutter-681ca5be62652ffb5fe940d458e39b20c705eed5.tar.gz kutter-681ca5be62652ffb5fe940d458e39b20c705eed5.tar.xz kutter-681ca5be62652ffb5fe940d458e39b20c705eed5.zip | |
config: Do not use beagleboard aliases in example config files
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Diffstat (limited to 'config/generic-cramps.cfg')
| -rw-r--r-- | config/generic-cramps.cfg | 39 |
1 files changed, 19 insertions, 20 deletions
diff --git a/config/generic-cramps.cfg b/config/generic-cramps.cfg index 0e330d66..cab00ee4 100644 --- a/config/generic-cramps.cfg +++ b/config/generic-cramps.cfg @@ -11,46 +11,46 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: P8_13 -dir_pin: P8_12 -enable_pin: !P9_14 +step_pin: gpio0_23 +dir_pin: gpio1_12 +enable_pin: !gpio1_18 microsteps: 16 rotation_distance: 40 -endstop_pin: ^P8_8 +endstop_pin: ^gpio2_3 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: P8_15 -dir_pin: P8_14 -enable_pin: !P9_14 +step_pin: gpio1_15 +dir_pin: gpio0_26 +enable_pin: !gpio1_18 microsteps: 16 rotation_distance: 40 -endstop_pin: ^P8_10 +endstop_pin: ^gpio2_4 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: P8_19 -dir_pin: P8_18 -enable_pin: !P9_14 +step_pin: gpio0_22 +dir_pin: gpio2_1 +enable_pin: !gpio1_18 microsteps: 16 rotation_distance: 8 -endstop_pin: ^P9_13 +endstop_pin: ^gpio0_31 position_endstop: 0 position_max: 200 [extruder] -step_pin: P9_16 -dir_pin: P9_12 -enable_pin: !P9_14 +step_pin: gpio1_19 +dir_pin: gpio1_28 +enable_pin: !gpio1_18 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: P9_15 +heater_pin: gpio1_16 sensor_type: EPCOS 100K B57560G104F pullup_resistor: 2000 sensor_pin: host:analog5 @@ -62,7 +62,7 @@ min_temp: 0 max_temp: 250 [heater_bed] -heater_pin: P8_11 +heater_pin: gpio1_13 sensor_type: EPCOS 100K B57560G104F pullup_resistor: 2000 sensor_pin: host:analog4 @@ -71,11 +71,10 @@ min_temp: 0 max_temp: 130 [fan] -pin: P9_41 +pin: gpio0_20 [mcu] serial: /dev/rpmsg_pru30 -pin_map: beaglebone [mcu host] serial: /tmp/klipper_host_mcu @@ -88,6 +87,6 @@ max_z_velocity: 5 max_z_accel: 100 [output_pin machine_enable] -pin: P9_23 +pin: gpio1_17 value: 1 shutdown_value: 0 |