config: Use "stealthchop_threshold: 999999" if set

Change all the example config files to use either 0 or 999999 for
stealthchop_threshold (as is recommended in the TMC_Drivers.md
document).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 12 insertions, 12 deletions

diff --git a/config/generic-bigtreetech-skr-pro.cfg b/config/generic-bigtreetech-skr-pro.cfg
index 8a36fa9d..9682097b 100644
--- a/config/generic-bigtreetech-skr-pro.cfg
+++ b/config/generic-bigtreetech-skr-pro.cfg
@@ -111,37 +111,37 @@ max_z_accel: 100
 #uart_pin: PC13
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_y]
 #uart_pin: PE3
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2208 stepper_z]
 #uart_pin: PE1
 #run_current: 0.650
 #hold_current: 0.450
-#stealthchop_threshold: 30
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder]
 #uart_pin: PD4
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder1]
 #uart_pin: PD1
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2208 extruder2]
 #uart_pin: PD6
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 
 ########################################
@@ -154,7 +154,7 @@ max_z_accel: 100
 ##diag1_pin: PB10
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_y]
 #cs_pin: PB8
@@ -162,7 +162,7 @@ max_z_accel: 100
 ##diag1_pin: PE12
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 250
+#stealthchop_threshold: 999999
 
 #[tmc2130 stepper_z]
 #cs_pin: PB9
@@ -170,7 +170,7 @@ max_z_accel: 100
 ##diag1_pin: PG8
 #run_current: 0.650
 #hold_current: 0.450
-#stealthchop_threshold: 30
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder]
 #cs_pin: PB3
@@ -178,7 +178,7 @@ max_z_accel: 100
 ##diag1_pin: PE15
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder1]
 #cs_pin: PG15
@@ -186,7 +186,7 @@ max_z_accel: 100
 ##diag1_pin: PE10
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 #[tmc2130 extruder2]
 #cs_pin: PG12
@@ -194,7 +194,7 @@ max_z_accel: 100
 ##diag1_pin: PG5
 #run_current: 0.800
 #hold_current: 0.500
-#stealthchop_threshold: 5
+#stealthchop_threshold: 999999
 
 
 ########################################