diff options
| author | Kevin O'Connor <kevin@koconnor.net> | 2017-10-11 20:50:24 -0400 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2017-10-11 21:03:13 -0400 |
| commit | d3eb148cfa411bd8e22f06f190ffda4b2cca5a06 (patch) | |
| tree | 2706346415b40d5e5e7f203c10ed0d73b0a5bb10 | |
| parent | 00d541b7674fde5c4b308a4328fcc836dabcf1b9 (diff) | |
| download | kutter-d3eb148cfa411bd8e22f06f190ffda4b2cca5a06.tar.gz kutter-d3eb148cfa411bd8e22f06f190ffda4b2cca5a06.tar.xz kutter-d3eb148cfa411bd8e22f06f190ffda4b2cca5a06.zip | |
docs: Point to beaglebone.md from the main installation document
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
| -rw-r--r-- | docs/Installation.md | 12 | ||||
| -rw-r--r-- | docs/beaglebone.md | 4 |
2 files changed, 9 insertions, 7 deletions
diff --git a/docs/Installation.md b/docs/Installation.md index d1c40a24..64d4f180 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -1,15 +1,17 @@ These instructions assume the software will run on a Raspberry Pi -computer in conjunction with OctoPrint. It is recommended that a -Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host -machine. +computer in conjunction with OctoPrint. (See the +[Beaglebone specific instructions](beaglebone.md) if using a +Beaglebone.) It is recommended that a Raspberry Pi 2 or Raspberry Pi 3 +computer be used as the host machine. It should be possible to run the Klipper host software on any computer running a recent Linux distribution, but doing so will require Linux admin knowledge to translate these installation instructions to the particulars of that machine. -Klipper currently supports Atmel ATmega based micro-controllers and -Arduino Due (Atmel SAM3x8e ARM micro-controller) printers. +Klipper currently supports Atmel ATmega based micro-controllers, +Arduino Due (Atmel SAM3x8e ARM micro-controller), and +[Beaglebone PRU](beaglebone.md) based printers. Prepping an OS image ==================== diff --git a/docs/beaglebone.md b/docs/beaglebone.md index 2b61478d..5d773287 100644 --- a/docs/beaglebone.md +++ b/docs/beaglebone.md @@ -1,5 +1,5 @@ This document describes the process of running Klipper on a Beaglebone -PRU. The PRU support is experimental. +PRU. Building an OS image ==================== @@ -91,4 +91,4 @@ Remaining configuration Complete the installation by configuring Klipper and Octoprint following the instructions in -[the main installation document](Installation.md#Configuring_Klipper). +[the main installation document](Installation.md#configuring-klipper). |