1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
|
// SPI functions on STM32H7
//
// Copyright (C) 2019 Kevin O'Connor <kevin@koconnor.net>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "board/io.h" // readb, writeb
#include "command.h" // shutdown
#include "gpio.h" // spi_setup
#include "internal.h" // gpio_peripheral
#include "sched.h" // sched_shutdown
struct spi_info {
SPI_TypeDef *spi;
uint8_t miso_pin, mosi_pin, sck_pin, function;
};
DECL_ENUMERATION("spi_bus", "spi2", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi2", "PB14,PB15,PB13");
DECL_ENUMERATION("spi_bus", "spi1", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi1", "PA6,PA7,PA5");
DECL_ENUMERATION("spi_bus", "spi1a", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi1a", "PB4,PB5,PB3");
#if !CONFIG_MACH_STM32F1
DECL_ENUMERATION("spi_bus", "spi2a", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi2a", "PC2,PC3,PB10");
#endif
#ifdef SPI3
DECL_ENUMERATION("spi_bus", "spi3a", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi3a", "PC11,PC12,PC10");
#endif
#ifdef SPI4
DECL_ENUMERATION("spi_bus", "spi4", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi4", "PE13,PE14,PE12");
#endif
#ifdef GPIOI
DECL_ENUMERATION("spi_bus", "spi2b", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi2b", "PI2,PI3,PI1");
#endif
#ifdef SPI5
DECL_ENUMERATION("spi_bus", "spi5", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi5", "PF8,PF9,PF7");
DECL_ENUMERATION("spi_bus", "spi5a", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi5a", "PH7,PF11,PH6");
#endif
#ifdef SPI6
DECL_ENUMERATION("spi_bus", "spi6", __COUNTER__);
DECL_CONSTANT_STR("BUS_PINS_spi6", "PG12,PG14,PG13");
#endif
static const struct spi_info spi_bus[] = {
{ SPI2, GPIO('B', 14), GPIO('B', 15), GPIO('B', 13), GPIO_FUNCTION(5) },
{ SPI1, GPIO('A', 6), GPIO('A', 7), GPIO('A', 5), GPIO_FUNCTION(5) },
{ SPI1, GPIO('B', 4), GPIO('B', 5), GPIO('B', 3), GPIO_FUNCTION(5) },
#if !CONFIG_MACH_STM32F1
{ SPI2, GPIO('C', 2), GPIO('C', 3), GPIO('B', 10), GPIO_FUNCTION(5) },
#endif
#ifdef SPI3
{ SPI3, GPIO('C', 11), GPIO('C', 12), GPIO('C', 10), GPIO_FUNCTION(6) },
#endif
#ifdef SPI4
{ SPI4, GPIO('E', 13), GPIO('E', 14), GPIO('E', 12), GPIO_FUNCTION(5) },
#endif
{ SPI2, GPIO('I', 2), GPIO('I', 3), GPIO('I', 1), GPIO_FUNCTION(5) },
#ifdef SPI5
{ SPI5, GPIO('F', 8), GPIO('F', 9), GPIO('F', 7), GPIO_FUNCTION(5) },
{ SPI5, GPIO('H', 7), GPIO('F', 11), GPIO('H', 6), GPIO_FUNCTION(5) },
#endif
#ifdef SPI6
{ SPI6, GPIO('G', 12), GPIO('G', 14), GPIO('G', 13), GPIO_FUNCTION(5)},
#endif
};
struct spi_config
spi_setup(uint32_t bus, uint8_t mode, uint32_t rate)
{
if (bus >= ARRAY_SIZE(spi_bus))
shutdown("Invalid spi bus");
// Enable SPI
SPI_TypeDef *spi = spi_bus[bus].spi;
if (!is_enabled_pclock((uint32_t)spi)) {
enable_pclock((uint32_t)spi);
gpio_peripheral(spi_bus[bus].miso_pin, spi_bus[bus].function, 1);
gpio_peripheral(spi_bus[bus].mosi_pin, spi_bus[bus].function, 0);
gpio_peripheral(spi_bus[bus].sck_pin, spi_bus[bus].function, 0);
}
// Calculate CR1 register
uint32_t pclk = get_pclock_frequency((uint32_t)spi);
uint32_t div = 0;
while ((pclk >> (div + 1)) > rate && div < 7)
div++;
uint32_t cr1 = SPI_CR1_SPE;
spi->CFG1 |= (div << SPI_CFG1_MBR_Pos) | (7 << SPI_CFG1_DSIZE_Pos);
CLEAR_BIT(spi->CFG1, SPI_CFG1_CRCSIZE);
spi->CFG2 |= ((mode << SPI_CFG2_CPHA_Pos) | SPI_CFG2_MASTER | SPI_CFG2_SSM
| SPI_CFG2_AFCNTR | SPI_CFG2_SSOE);
spi->CR1 |= SPI_CR1_SSI;
return (struct spi_config){ .spi = spi, .spi_cr1 = cr1 };
}
void
spi_prepare(struct spi_config config)
{
}
void
spi_transfer(struct spi_config config, uint8_t receive_data,
uint8_t len, uint8_t *data)
{
uint8_t rdata = 0;
SPI_TypeDef *spi = config.spi;
MODIFY_REG(spi->CR2, SPI_CR2_TSIZE, len);
// Enable SPI and start transfer, these MUST be set in this sequence
SET_BIT(spi->CR1, SPI_CR1_SPE);
SET_BIT(spi->CR1, SPI_CR1_CSTART);
while (len--) {
writeb((void *)&spi->TXDR, *data);
while((spi->SR & (SPI_SR_RXWNE | SPI_SR_RXPLVL)) == 0);
rdata = readb((void *)&spi->RXDR);
if (receive_data) {
*data = rdata;
}
data++;
}
while ((spi->SR & SPI_SR_EOT) == 0);
// Clear flags and disable SPI
SET_BIT(spi->IFCR, 0xFFFFFFFF);
CLEAR_BIT(spi->CR1, SPI_CR1_SPE);
}
|
